HM-PB-6-WM55 Datenpunkte rpc.0
-
Hallo zusammen,
leider erscheinen zu meinem 6-Fach Wandtaster TYP HM-PB-6-WM55 keine Datenpunkte in rpc.0.
Bislang hatte ich damit kein Problem. Leider ging nach dem Urlaub nichts mehr. Ich habe ein komplettes Linux Update gemacht und IoBroker komplett neu installiert.
Testweise habe ich die Datenpunkte auch mal von Hand eingetragen. Das hatte leider nicht geklappt. Die Tastendrücke wurden nicht erkannt.
Hier infos zum System:
Plattform: linux Betriebssystem: linux Architektur: arm CPUs: 4 Geschwindigkeit: 1200 MHz Modell: ARMv7 Processor rev 4 (v7l) RAM: 921.9 MB System-Betriebszeit: 01:38:35 Node.js: v18.20.3 time: 1719160601660 timeOffset: -120 NPM: 10.7.0 Adapter-Anzahl: 539 Datenträgergröße: 13.9 GB Freier Festplattenspeicher: 8.3 GB Aktive Instanzen: 9 Pfad: /opt/iobroker/ Betriebszeit: 00:01:07 aktiv:An was könnte das liegen?
Vielen Dank.
-
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
An was könnte das liegen?
an vielem!
Zumal du von Symptomen erzählst, die von verschiedenen Ursachen herrühren könnten/müssten.
Da braucht es mehr Infos um helfen zu können.
siehe auch:
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1 -
@homoran
Danke für den Hinweis. Gut, dann versuche ich im folgenden die fehlenden Informationen zu liefern.CCU3 mit Firmware 3.75.7
XML-API 2.3Hier die Ausgabe von "iob diag"
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspib Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v7+ Architecture: arm Model : Raspberry Pi 3 Model B Rev 1.2 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 19:29:09 up 3 min, 1 user, load average: 3.01, 1.97, 0.82 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-06-26 19:29:09 CEST Universal time: Wed 2024-06-26 17:29:09 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video plugdev bluetooth gpio i2c User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 921M 460M 222M 0.0K 239M 406M Swap: 99M 1.0M 98M Total: 1.0G 461M 321M Active iob-Instances: 9 921 M total memory 459 M used memory 133 M active memory 499 M inactive memory 222 M free memory 40 M buffer memory 198 M swap cache 99 M total swap 1 M used swap 98 M free swap *** top - Table Of Processes *** top - 19:29:09 up 3 min, 1 user, load average: 3.01, 1.97, 0.82 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.4 us, 2.9 sy, 0.0 ni, 95.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 922.0 total, 222.5 free, 460.0 used, 239.5 buff/cache MiB Swap: 100.0 total, 98.7 free, 1.2 used. 406.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 14G 6.4G 7.1G 48% / devtmpfs devtmpfs 333M 0 333M 0% /dev tmpfs tmpfs 461M 0 461M 0% /dev/shm tmpfs tmpfs 185M 988K 184M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 93M 0 93M 0% /run/user/1001 Messages concerning ext4 filesystem in dmesg: [sudo] password for iobroker: [Wed Jun 26 19:25:41 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e5a72d0e-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jun 26 19:25:44 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Wed Jun 26 19:25:44 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Wed Jun 26 19:25:49 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Wed Jun 26 19:25:49 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted [Wed Jun 26 19:25:49 2024] EXT4-fs (mmcblk0p2): recovery complete [Wed Jun 26 19:25:52 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jun 26 19:25:52 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Jun 26 19:25:55 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/dev devtmpfs devtmpfs rw,relatime,size=340460k,nr_inodes=85115,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=188820k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1001 tmpfs tmpfs rw,nosuid,nodev,relatime,size=94408k,nr_inodes=23602,mode=700,uid=1001,gid=1001 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.2G /var/ 1.6G /var/log 1.5G /var/log/journal/240518a097cd485da90a9a4d43e25df5 1.5G /var/log/journal 367M /var/cache Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 256.0M in the file system. /opt/iobroker/backups: 5.2M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 259M /opt/iobroker/iobroker-data/ 197M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 12M /opt/iobroker/iobroker-data/objects.jsonl.back 12M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.a9c6d34a.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A600Q7UX-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspib - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspib - enabled + system.adapter.discovery.0 : discovery : raspib - enabled + system.adapter.harmony.0 : harmony : raspib - enabled + system.adapter.hm-rega.0 : hm-rega : raspib - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspib - enabled, port: 12010 system.adapter.hm-rpc.1 : hm-rpc : raspib - disabled, port: 12001 + system.adapter.javascript.0 : javascript : raspib - enabled system.adapter.ping.0 : ping : raspib - disabled system.adapter.sonnen.0 : sonnen : raspib - disabled system.adapter.sql.0 : sql : raspib - disabled + system.adapter.wifilight.0 : wifilight : raspib - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspib - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspib - enabled, port: 12010 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "harmony" : 1.4.0 , installed 1.4.0 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonnen" : 1.18.1 , installed 1.18.1 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "wifilight" : 1.2.2 , installed 1.2.2 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 2012 States: 1303 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10852 543/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 14599 513/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 10990 513/iobroker.js-con tcp 0 0 192.168.178.35:12010 0.0.0.0:* LISTEN 1001 14961 1027/io.hm-rpc.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 14626 427/node-red tcp6 0 0 :::61991 :::* LISTEN 1001 16589 1081/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 14475 543/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 14098 971/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13601 412/avahi-daemon: r udp 0 0 0.0.0.0:36810 0.0.0.0:* 108 13603 412/avahi-daemon: r udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 14166 1081/io.harmony.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14482 728/dhcpcd udp6 0 0 :::5353 :::* 108 13602 412/avahi-daemon: r udp6 0 0 :::546 :::* 0 14493 728/dhcpcd udp6 0 0 :::43081 :::* 108 13604 412/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-26 19:29:07.304 - debug: hm-rpc.0 (1027) hm-rpc.0.001F98A99A3D51.0.DUTY_CYCLE_LEVEL ==> UNIT: "%" (min: 0, max: 100) From "40" => "40" 2024-06-26 19:30:00.409 - warn: javascript.0 (985) getState "hm-rpc.0.MEQ0091467.2.ACTUAL_HUMIDITY" not found (3) 2024-06-26 19:30:00.441 - warn: javascript.0 (985) at Object.<anonymous> (script.js.Wandthermostat:27:17) 2024-06-26 19:30:00.443 - warn: javascript.0 (985) at Job.job (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1769:34) 2024-06-26 19:30:00.444 - warn: javascript.0 (985) at Job.invoke (/opt/iobroker/node_modules/node-schedule/lib/Job.js:171:15) 2024-06-26 19:30:00.445 - warn: javascript.0 (985) at /opt/iobroker/node_modules/node-schedule/lib/Invocation.js:268:28 2024-06-26 19:30:00.446 - warn: javascript.0 (985) at Timeout._onTimeout (/opt/iobroker/node_modules/node-schedule/lib/Invocation.js:228:7) 2024-06-26 19:30:00.447 - warn: javascript.0 (985) at listOnTimeout (node:internal/timers:569:17) 2024-06-26 19:30:00.448 - warn: javascript.0 (985) at processTimers (node:internal/timers:512:7) 2024-06-26 19:30:00.449 - info: javascript.0 (985) script.js.Wandthermostat: Änderung, ID: Esszimmer_EG_Thermostat/hm-rpc.0.MEQ0091467, Feuchte: null%, >>>: http://ha/addons/xmlapi/mastervaluechange.cgi?device_id=27479&name=SHOW_HUMIDITY&value=0 2024-06-26 19:30:00.456 - error: javascript.0 (985) Error in callback: ReferenceError: request is not defined 2024-06-26 19:30:00.457 - error: javascript.0 (985) at Object.<anonymous> (script.js.Wandthermostat:45:13) 2024-06-26 19:30:00.459 - error: javascript.0 (985) at Job.job (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1769:34) 2024-06-26 19:30:00.460 - error: javascript.0 (985) at Job.invoke (/opt/iobroker/node_modules/node-schedule/lib/Job.js:171:15) 2024-06-26 19:30:00.461 - error: javascript.0 (985) at /opt/iobroker/node_modules/node-schedule/lib/Invocation.js:268:28 2024-06-26 19:30:00.462 - error: javascript.0 (985) at Timeout._onTimeout (/opt/iobroker/node_modules/node-schedule/lib/Invocation.js:228:7) 2024-06-26 19:30:00.463 - error: javascript.0 (985) at listOnTimeout (node:internal/timers:569:17) 2024-06-26 19:30:00.464 - error: javascript.0 (985) at processTimers (node:internal/timers:512:7) 2024-06-26 19:30:28.628 - debug: hm-rpc.0 (1027) [KEEPALIVE] Check if connection is alive 2024-06-26 19:30:28.630 - debug: hm-rpc.0 (1027) Send PING... 2024-06-26 19:30:28.653 - debug: hm-rpc.0 (1027) PING ok 2024-06-26 19:30:28.661 - debug: hm-rpc.0 (1027) xmlrpc <- event ["raspib:hm-rpc.0:01beafc2a2114726def4b10d08ff7044","CENTRAL:0","PONG","raspib:hm-rpc.0:0af9c35f23be3a2310324adc015adfba"] 2024-06-26 19:30:28.663 - debug: hm-rpc.0 (1027) xmlrpc <- event: raspib:hm-rpc.0:01beafc2a2114726def4b10d08ff7044.CENTRAL.0.PONG:raspib:hm-rpc.0:0af9c35f23be3a2310324adc015adfba discarded, no matching device 2024-06-26 19:30:28.678 - debug: hm-rpc.0 (1027) xmlrpc <- event ["raspib:hm-rpc.0:0af9c35f23be3a2310324adc015adfba","CENTRAL:0","PONG","raspib:hm-rpc.0:0af9c35f23be3a2310324adc015adfba"] 2024-06-26 19:30:28.680 - debug: hm-rpc.0 (1027) xmlrpc <- event: hm-rpc.0.CENTRAL.0.PONG:raspib:hm-rpc.0:0af9c35f23be3a2310324adc015adfba discarded, no matching deviceHier die Zusammenfassung:
======================= SUMMARY ======================= v.2024-05-22 Static hostname: raspib Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v7+ Architecture: arm Installation: native Kernel: armv7l Userland: 32 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1001 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 Recommended versions are nodejs 18.20.3 and npm 10.7.0 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 921M 472M 127M 0.0K 322M 390M Swap: 99M 1.0M 98M Total: 1.0G 473M 225M Active iob-Instances: 9 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.17.14 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspib - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 2012 States: 1303 Size of iob-Database: 12M /opt/iobroker/iobroker-data/objects.jsonl.back 12M /opt/iobroker/iobroker-data/objects.jsonl 852K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@homoran
Ich habe nochmals den unvollständigen Taster aus dem Objektbaum gelöscht und rpc.0 vollständig synchronisiert.
Hier das log dazu:
iobroker.current.log.htmHoffe, dass nun genug Information vorliegen.
Danke vorab und Grüße
Thomas -
@tk-0 sagte: Hier das log dazu:
Instanz hm-rpc.0 behandelt HmIP-Geräte. HM-PB-6-WM55 ist ein HM-Gerät (rfd).
-
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
49 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
dein Dateisystem hat einen Schuss!
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
MiB Mem : 922.0 total, 222.5 free, 460.0 used, 239.5 buff/cache
Mutig!
bei
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Active iob-Instances: 9
ist dann aber wirklich Schluss.
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Hoffe, dass nun genug Information vorliegen.
leider nein!
Die Konfigurationen der Instanzen fehlen noch.@paul53 hat aber wahrscheinlich den Wurm schon gesehen
@paul53 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
@tk-0 sagte: Hier das log dazu:
Instanz hm-rpc.0 behandelt HmIP-Geräte. HM-PB-6-WM55 ist ein HM-Gerät (rfd).
-
@homoran
Danke für die schnelle Hilfe.Leider werde ich daraus noch nicht ganz schlau.
OK Dateisystemfehler ist klar.
Am besten das System komplett auf ner neuen SD aufsetzen!Was meinst Du mit "Mutig" ?
Iobroker hat beim synchronisieren "HM-PB-6-WM55" in rpc.0 gepackt, nicht ich oder kann das durch das fehlerhafte Dateisystem entstanden sein?
Konfiguration der Instanzen sind als .json angehängt:
admin.0.json
system.adapter.backitup.0.json
system.adapter.harmony.0.json
hm-rpc.0.json
hm-rpc.1.json
javascript.0.jsonHoffe das ist so richtig.
Danke und Grüße
Thomas -
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Am besten das System komplett auf ner neuen SD aufsetzen!
richtig!
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Was meinst Du mit "Mutig" ?
dein geringes RAM mit nur 1GB reicht wahrscheinlich nicht.
Auf keinen Fall wenn du noch weitere Instanzen installieren wirst.@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Iobroker hat beim synchronisieren "HM-PB-6-WM55" in rpc.0 gepackt, nicht ich oder kann das durch das fehlerhafte Dateisystem entstanden sein?
nein, diese Informationen kommen von hm-rega, und da du anscheinend keine Instanz für HomeMatic hayt, kommt auch nicht mehr.
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Konfiguration der Instanzen sind als .json angehängt:
nutzt mir mobil nichts
Screenshots der HM Instanzen wären jetzt mal besser
-
@tk-0
hm-rpc.1 ist nicht aktiv, was daran liegen kann, dass nicht XML, sondern BIN als Type eingetragen ist. -
Hallo Homoran, hallo Paul,
danke für eure Hilfe.
Dann fange ich am besten bei 0 an mit ner neuen SD Karte, einem frisch installiertem System und am besten auch einem stärkeren Raspberry. Der PI5 sollte es sicher dann eine Zeit lang tun, oder?
Sollte es dann wieder nicht tun, melde ich mich wieder
Danke.
Grüße
Thomas -
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Der PI5 sollte es sicher dann eine Zeit lang tun, oder?
ja
in extremo -
Hallo Homoran, hallo Paul,
habe einen neuen Raspi5 komplett frisch aufgesetzt, alles upgedatet und den aktuellsten Stand von Iobroker aufgespielt.
Leider wird der 6-Fach Taster immer noch nicht richtig erkannt und die Instanz hm-rpc.0 läuft nun auch nicht richtig. Diese startet immer wieder neu.
Hatte die Hoffnung, dass auf einem komplett neu installiertem System alles fehlerfrei läuft.
CPU: 6,13 % RAM: 12 % Betriebszeit: 0h Verfügbar: 5.0.19 Installiert: 5.0.19 Ereignisse: ⇥9 / ↦13 Plattform: linux Betriebssystem: linux Architektur: arm64 CPUs: 4 Geschwindigkeit: 2400 MHz Modell: Cortex-A76 RAM: 7.8 GB System-Betriebszeit: 00:20:49 Node.js: v20.15.0 time: 1719766706278 timeOffset: -120 NPM: 10.7.0 Adapter-Anzahl: 538 Datenträgergröße: 116.7 GB Freier Festplattenspeicher: 113.2 GB Aktive Instanzen: 7 Pfad: /opt/iobroker/ Betriebszeit: 1 T. 09:25:42 aktiv: true _nodeCurrent: 20.15.0 _nodeNewest: 20.15.0 _nodeNewestNext: 18.20.3 _npmCurrent: 10.7.0 _npmNewest: 10.7.0 _npmNewestNext: 10.7.0Ausgabe iob diag
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspi5 Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-2712 Architecture: arm64 Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 19:08:53 up 31 min, 2 users, load average: 0.53, 0.28, 0.14 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred *** Time and Time Zones *** Local time: Sun 2024-06-30 19:08:53 CEST Universal time: Sun 2024-06-30 17:08:53 UTC RTC time: Sun 2024-06-30 17:08:53 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 845M 7.0G 5.4M 651M 7.6G Swap: 209M 0B 209M Total: 8.7G 845M 7.3G Active iob-Instances: 10 8052 M total memory 806 M used memory 734 M active memory 432 M inactive memory 6720 M free memory 48 M buffer memory 573 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 19:08:54 up 31 min, 2 users, load average: 0.53, 0.28, 0.14 Tasks: 167 total, 2 running, 165 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.4 total, 6719.2 free, 808.4 used, 621.3 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 7244.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.8G 0 3.8G 0% /dev tmpfs tmpfs 806M 5.2M 801M 1% /run /dev/mmcblk0p2 ext4 117G 3.5G 108G 4% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 806M 0 806M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jun 30 18:37:37 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=D8:3A:DD:DE:20:86 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=ca399bea-02 rootfstype=ext4 fsck.repair=yes rootwait [Sun Jun 30 18:37:40 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Sun Jun 30 18:37:41 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1281 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=3950816k,nr_inodes=246926,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=824576k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=824560k,nr_inodes=206140,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 635M /var/ 205M /var/cache 200M /var/cache/apt 165M /var/lib 133M /var/lib/apt/lists Archived and active journals take up 63.7M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 163M /opt/iobroker/iobroker-data/ 156M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static 117M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.a9c6d34a.chunk.js.map 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/61.54b23816.chunk.js.map 6.6M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/139.52cd9c26.chunk.js.map 6.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/516.837647f3.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.15.0 /usr/bin/node v20.15.0 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.15.0-1nodesource1 Candidate: 20.15.0-1nodesource1 Version table: *** 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.3.1 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspi5 - enabled + system.adapter.discovery.0 : discovery : raspi5 - enabled + system.adapter.harmony.0 : harmony : raspi5 - enabled + system.adapter.hm-rega.0 : hm-rega : raspi5 - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspi5 - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : raspi5 - enabled, port: 12010 + system.adapter.javascript.0 : javascript : raspi5 - enabled system.adapter.sonnen.0 : sonnen : raspi5 - disabled + system.adapter.wifilight.0 : wifilight : raspi5 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspi5 - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : raspi5 - enabled, port: 12010 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "harmony" : 1.4.0 , installed 1.4.0 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "sonnen" : 1.18.1 , installed 1.18.1 Adapter "wifilight" : 1.2.2 , installed 1.2.2 Objects and States Please stand by - This may take a while Objects: 1874 States: 1260 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 43 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 1888 767/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 1893 767/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1883 775/sshd: /usr/sbin tcp 0 0 192.168.178.60:12010 0.0.0.0:* LISTEN 1001 7280 1090/io.hm-rpc.1 tcp 0 0 192.168.178.60:12001 0.0.0.0:* LISTEN 1001 15561 2888/io.hm-rpc.0 tcp6 0 0 :::8081 :::* LISTEN 1001 6511 1018/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 1885 775/sshd: /usr/sbin tcp6 0 0 :::61991 :::* LISTEN 1001 9337 1218/io.harmony.0 udp 0 0 0.0.0.0:57073 0.0.0.0:* 104 5712 649/avahi-daemon: r udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 9338 1218/io.harmony.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5710 649/avahi-daemon: r udp6 0 0 :::53052 :::* 104 5713 649/avahi-daemon: r udp6 0 0 fe80::eb4d:88c3:cf0:546 :::* 0 5057 734/NetworkManager udp6 0 0 :::5353 :::* 104 5711 649/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-30 19:08:27.399 - warn: hm-rpc.0 (2603) setTimeout called, but adapter is shutting down 2024-06-30 19:08:28.399 - info: hm-rpc.0 (2603) terminating 2024-06-30 19:08:28.400 - debug: hm-rpc.0 (2603) Plugin sentry destroyed 2024-06-30 19:08:28.400 - info: hm-rpc.0 (2603) Terminated (NO_ERROR): Without reason 2024-06-30 19:08:28.923 - info: host.raspi5 instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR) 2024-06-30 19:08:28.923 - info: host.raspi5 Restart adapter system.adapter.hm-rpc.0 because enabled 2024-06-30 19:08:58.939 - info: host.raspi5 instance system.adapter.hm-rpc.0 started with pid 2888 2024-06-30 19:08:59.419 - debug: hm-rpc.0 (2888) Redis Objects: Use Redis connection: 127.0.0.1:9001 2024-06-30 19:08:59.434 - debug: hm-rpc.0 (2888) Objects client ready ... initialize now 2024-06-30 19:08:59.435 - debug: hm-rpc.0 (2888) Objects create System PubSub Client 2024-06-30 19:08:59.436 - debug: hm-rpc.0 (2888) Objects create User PubSub Client 2024-06-30 19:08:59.448 - debug: hm-rpc.0 (2888) Objects client initialize lua scripts 2024-06-30 19:08:59.453 - debug: hm-rpc.0 (2888) Objects connected to redis: 127.0.0.1:9001 2024-06-30 19:08:59.464 - debug: hm-rpc.0 (2888) Redis States: Use Redis connection: 127.0.0.1:9000 2024-06-30 19:08:59.469 - debug: hm-rpc.0 (2888) States create System PubSub Client 2024-06-30 19:08:59.470 - debug: hm-rpc.0 (2888) States create User PubSub Client 2024-06-30 19:08:59.519 - debug: hm-rpc.0 (2888) States connected to redis: 127.0.0.1:9000 2024-06-30 19:08:59.546 - debug: hm-rpc.0 (2888) Plugin sentry Initialize Plugin (enabled=true) 2024-06-30 19:08:59.692 - info: hm-rpc.0 (2888) starting. Version 1.17.0 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v20.15.0, js-controller: 5.0.19 2024-06-30 19:08:59.773 - info: hm-rpc.0 (2888) binrpc server is trying to listen on 192.168.178.60:12001 2024-06-30 19:08:59.774 - info: hm-rpc.0 (2888) binrpc client is trying to connect to 192.168.178.45:2001/ with ["xmlrpc_bin://192.168.178.60:12001","raspi5:hm-rpc.0:6591a0a2ae2e68ddbe0279bb3c164480"] 2024-06-30 19:08:59.775 - debug: hm-rpc.0 (2888) Connect... 2024-06-30 19:08:59.775 - debug: hm-rpc.0 (2888) binrpc -> 192.168.178.45:2001/ init ["xmlrpc_bin://192.168.178.60:12001","raspi5:hm-rpc.0:6591a0a2ae2e68ddbe0279bb3c164480"] 2024-06-30 19:08:59.777 - debug: hm-rpc.0 (2888) start connecting interval 2024-06-30 19:09:04.778 - error: hm-rpc.0 (2888) Init not possible, going to stop: response timeoutiob diag Zusammenfassung
======================= SUMMARY ======================= v.2024-05-22 Static hostname: raspi5 Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-2712 Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 43 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.15.0 /usr/bin/node v20.15.0 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.1 Recommended versions are nodejs 18.20.3 and npm 10.7.0 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.4G 864M 7.0G 5.4M 653M 7.6G Swap: 209M 0B 209M Total: 8.7G 864M 7.2G Active iob-Instances: 10 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.17.14 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin Objects: 1874 States: 1260 Size of iob-Database: 6.0M /opt/iobroker/iobroker-data/objects.jsonl 884K /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Hier das Protokoll mit Debug Ausgabe für rpc.0
iobroker.current.log.htmHier Screenshots zur Konfiguration. Alles original belassen!
Was stimmt nicht?
Danke
-
@tk-0 rpc.0 hat bin rpc statt xml
-
Ja, so ist es in der Konfigration drin. rpc.0 mit bin-rpc
-
@tk-0 sagte in HM-PB-6-WM55 Datenpunkte rpc.0:
Ja, so ist es in der Konfigration drin. rpc.0 mit bin-rpc
ja, und das ist falsch
-
OK, habe es geändert und nun funktioniert es. Vielen Dank.
-
