[gelöst]Admin port blockiert
-
Hallo,
da ich meinen Raspi4 auf bookworm updatete, machte ich gleich mal ein frisches IObroker mit drauf.
Bis hier alles gut. Dann noch Motioneye dazu, ging auch noch gut. Nach einem Reboot, waren dann aber der Admin.0 (port 8081) und web.0 (port 8082) nicht mehr erreichbar. Motioneye geht gar nicht mehr...
Ich habe jetzt erstmal einen 2ten Admin mit anderen Port hinzugefügt. Geht.Wie aber kann ich den Admin.0 wieder unter 8081 und web.0 unter 8082 erreichbar machen?
Grüße...
-
@homezecke
zeig mal die Langfassung voniob diag -
@homoran
======== Start marking the full check here =========Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: haussteuerung Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 16:00:48 up 2 days, 1:32, 2 users, load average: 1.63, 1.11, 0.89 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2024-06-12 16:00:48 CEST Universal time: Wed 2024-06-12 14:00:48 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 3.3G 3.0G 1.4M 2.0G 4.9G Swap: 209M 0B 209M Total: 8.4G 3.3G 3.2G Active iob-Instances: 30 7809 M total memory 3160 M used memory 3223 M active memory 1487 M inactive memory 2818 M free memory 188 M buffer memory 1765 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 16:00:49 up 2 days, 1:32, 2 users, load average: 1.63, 1.11, 0.89 Tasks: 228 total, 1 running, 227 sleeping, 0 stopped, 0 zombie %Cpu(s): 20.0 us, 0.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7809.0 total, 2817.2 free, 3161.2 used, 1954.0 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 4647.9 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * logrotate.service loaded failed failed Rotate log files * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 781M 1.3M 780M 1% /run /dev/sda2 ext4 117G 8.3G 103G 8% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 65M 446M 13% /boot/firmware tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Jun 10 14:27:59 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:BE:C3:A9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=f89c2ddb-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Jun 10 14:28:02 2024] EXT4-fs (sda2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Mon Jun 10 14:28:04 2024] EXT4-fs (sda2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=5434 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=3727760k,nr_inodes=931940,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=799648k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799644k,nr_inodes=199911,mode=700,uid=1000,gid=1000 |-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/var/lib/lxcfs lxcfs fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 1.6G /var/ 846M /var/lib 668M /var/lib/piVCCU3 606M /var/lib/piVCCU3/rootfs 287M /var/cache Archived and active journals take up 207.6M in the file system. /opt/iobroker/backups: 51M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 992M /opt/iobroker/iobroker-data/ 820M /opt/iobroker/iobroker-data/files 195M /opt/iobroker/iobroker-data/files/vis-2 186M /opt/iobroker/iobroker-data/files/javascript.admin 153M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/objects.jsonl 29M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.ecef4f21.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.4ff93037.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v20.14.0 /usr/bin/node v20.14.0 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.1 nodejs: Installed: 20.14.0-1nodesource1 Candidate: 20.14.0-1nodesource1 Version table: *** 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.17.14 javascript: 8.4.2 nodejs modules from github: 2 | +-- node-milight-promise@0.3.2 (git+ssh://git@github.com/Steiger04/node-milight-promise.git#f1089feac9b7990727adf2016891029436729d33) | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : haussteuerung - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin : haussteuerung - enabled, port: 8999, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : haussteuerung - enabled system.adapter.alias-manager.0 : alias-manager : haussteuerung - disabled + system.adapter.awtrix-light.0 : awtrix-light : haussteuerung - enabled system.adapter.awtrix-light.1 : awtrix-light : haussteuerung - disabled system.adapter.backitup.0 : backitup : haussteuerung - disabled system.adapter.daswetter.0 : daswetter : haussteuerung - enabled + system.adapter.denon.0 : denon : haussteuerung - enabled system.adapter.discovery.0 : discovery : haussteuerung - disabled + system.adapter.echarts.0 : echarts : haussteuerung - enabled system.adapter.flot.0 : flot : haussteuerung - disabled system.adapter.fullybrowser.0 : fullybrowser : haussteuerung - disabled system.adapter.habpanel.0 : habpanel : haussteuerung - disabled system.adapter.heos.0 : heos : haussteuerung - disabled + system.adapter.hiob.0 : hiob : haussteuerung - enabled, port: 8090 + system.adapter.history.0 : history : haussteuerung - enabled + system.adapter.hm-rega.0 : hm-rega : haussteuerung - enabled + system.adapter.hm-rpc.0 : hm-rpc : haussteuerung - enabled, port: 0 system.adapter.ical.0 : ical : haussteuerung - enabled system.adapter.icons-icons8.0 : icons-icons8 : haussteuerung - disabled system.adapter.icons-material-png.0 : icons-material-png : haussteuerung - disabled system.adapter.icons-material-svg.0 : icons-material-svg : haussteuerung - disabled system.adapter.info.0 : info : haussteuerung - disabled + system.adapter.javascript.0 : javascript : haussteuerung - enabled system.adapter.lovelace.0 : lovelace : haussteuerung - disabled, port: 8091, bind: 0.0.0.0, run as: admin + system.adapter.mielecloudservice.0 : mielecloudservice : haussteuerung - enabled + system.adapter.milight-smart-light.0 : milight-smart-light : haussteuerung - enabled system.adapter.milight.0 : milight : haussteuerung - disabled, port: 5987 + system.adapter.mqtt.0 : mqtt : haussteuerung - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : haussteuerung - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : haussteuerung - enabled, port: 1880, bind: 0.0.0.0 system.adapter.ping.0 : ping : haussteuerung - disabled system.adapter.proxy.0 : proxy : haussteuerung - enabled + system.adapter.reolink.0 : reolink : haussteuerung - enabled + system.adapter.rpi2.0 : rpi2 : haussteuerung - enabled + system.adapter.shelly.0 : shelly : haussteuerung - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : haussteuerung - enabled, port: 9091, bind: 0.0.0.0, run as: admin system.adapter.slideshow.0 : slideshow : haussteuerung - disabled + system.adapter.socketio.0 : socketio : haussteuerung - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.sonoff.0 : sonoff : haussteuerung - disabled, port: 1884, bind: 0.0.0.0 + system.adapter.sql.0 : sql : haussteuerung - enabled, port: 3306 system.adapter.synology.0 : synology : haussteuerung - disabled, port: 5000 + system.adapter.tr-064.0 : tr-064 : haussteuerung - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : haussteuerung - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: haussteuerung - disabled + system.adapter.vis-2.0 : vis-2 : haussteuerung - enabled system.adapter.vis-bars.0 : vis-bars : haussteuerung - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : haussteuerung - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : haussteuerung - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : haussteuerung - disabled system.adapter.vis-history.0 : vis-history : haussteuerung - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : haussteuerung - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : haussteuerung - disabled system.adapter.vis-justgage.0 : vis-justgage : haussteuerung - disabled system.adapter.vis-material.0 : vis-material : haussteuerung - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : haussteuerung - disabled system.adapter.vis-rgraph.0 : vis-rgraph : haussteuerung - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : haussteuerung - disabled system.adapter.vis.0 : vis : haussteuerung - enabled + system.adapter.web.0 : web : haussteuerung - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : haussteuerung - enabled, port: 8707, bind: 0.0.0.0, run as: admin + system.adapter.webui.0 : webui : haussteuerung - enabled + system.adapter.yeelight-2.0 : yeelight-2 : haussteuerung - enabled + system.adapter.zigbee.0 : zigbee : haussteuerung - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : haussteuerung - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.admin.1 : admin : haussteuerung - enabled, port: 8999, bind: 0.0.0.0, run as: admin + system.adapter.hiob.0 : hiob : haussteuerung - enabled, port: 8090 + system.adapter.hm-rpc.0 : hm-rpc : haussteuerung - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : haussteuerung - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : haussteuerung - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : haussteuerung - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : haussteuerung - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : haussteuerung - enabled, port: 9091, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : haussteuerung - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sql.0 : sql : haussteuerung - enabled, port: 3306 + system.adapter.web.0 : web : haussteuerung - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : haussteuerung - enabled, port: 8707, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : haussteuerung - enabled, port: /dev/ttyUSB0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 1.2.1 , installed 1.2.1 Adapter "backitup" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.15 , installed 3.1.15 Adapter "denon" : 1.15.5 , installed 1.15.5 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.0.12 , installed 3.0.12 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "heos" : 2.2.1 , installed 2.2.1 Adapter "hiob" : 0.1.4 , installed 0.1.4 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "javascript" : 8.5.2 , installed 8.4.2 [Updatable] Controller "js-controller": 6.0.2 , installed 5.0.19 [Updatable] Adapter "lovelace" : 4.1.10 , installed 4.1.10 Adapter "mielecloudservice": 6.5.6, installed 6.5.6 Adapter "milight" : 0.4.0 , installed 0.4.0 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxy" : 1.3.2 , installed 1.3.2 Adapter "reolink" : 1.1.0 , installed 1.1.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "slideshow" : 0.1.4 , installed 0.1.4 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.1.0 , installed 3.1.0 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-material": 1.3.33, installed 1.3.33 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.2.6 , installed 6.2.6 Adapter "webui" : 1.11.3 , installed 1.11.3 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "yeelight-2" : 1.4.0 , installed 1.4.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 12264 States: 9434 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:6 https://apt.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 2 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.51:2001 0.0.0.0:* LISTEN 1001 190332 18064/io.hm-rpc.0 tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 8216 1119/dnsmasq tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 7285 1019/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 7320 1019/iobroker.js-co tcp 0 0 127.0.0.1:6010 0.0.0.0:* LISTEN 1000 1952130 159712/sshd: pi@pts tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 670 1028/sshd: /usr/sbi tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 8798 2097/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 7005 2354/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 7006 2354/io.mqtt.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 7021 2467/io.mqtt.1 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 7022 2467/io.mqtt.1 tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 107 8249 1027/motion tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 107 8250 1027/motion tcp6 0 0 :::8090 :::* LISTEN 1001 8729 2122/io.hiob.0 tcp6 0 0 :::8082 :::* LISTEN 1001 157325 15136/io.admin.0 tcp6 0 0 :::8083 :::* LISTEN 1001 160368 15451/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 8151 2736/io.socketio.0 tcp6 0 0 :::8554 :::* LISTEN 1000 1841403 82439/go2rtc_linux_ tcp6 0 0 :::8555 :::* LISTEN 1000 1841404 82439/go2rtc_linux_ tcp6 0 0 :::80 :::* LISTEN 1001 9293 2097/node-red tcp6 0 0 :::22 :::* LISTEN 0 672 1028/sshd: /usr/sbi tcp6 0 0 :::8999 :::* LISTEN 1001 991 1802/io.admin.1 tcp6 0 0 ::1:6010 :::* LISTEN 1000 1952129 159712/sshd: pi@pts tcp6 0 0 :::9091 :::* LISTEN 1001 9209 2713/io.simple-api. tcp6 0 0 :::8707 :::* LISTEN 1001 11408 2811/io.web.1 tcp6 0 0 :::1984 :::* LISTEN 1000 1842294 82439/go2rtc_linux_ udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 1870733 82439/go2rtc_linux_ udp 0 0 192.168.178.51:5353 0.0.0.0:* 1001 9032 2559/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 2878 584/avahi-daemon: r udp 0 0 0.0.0.0:38220 0.0.0.0:* 1000 1872969 82439/go2rtc_linux_ udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 7048 2537/io.shelly.0 udp 0 0 0.0.0.0:39714 0.0.0.0:* 104 2880 584/avahi-daemon: r udp 0 0 192.168.178.51:48946 0.0.0.0:* 1000 1871614 82439/go2rtc_linux_ udp 0 0 10.0.3.1:53 0.0.0.0:* 0 8215 1119/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 8212 1119/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 6072 952/dhclient udp 0 0 0.0.0.0:32935 0.0.0.0:* 1001 9699 2689/io.milight-sma udp6 0 0 :::37999 :::* 104 2881 584/avahi-daemon: r udp6 0 0 :::5353 :::* 104 2879 584/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-06-12 15:58:31.580 - info: host.haussteuerung iobroker upload [19] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigNotifications.json5 jsonConfigNotifications.json5 application/json5 2024-06-12 15:58:31.588 - info: host.haussteuerung iobroker upload [18] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigOnedrive.json5 jsonConfigOnedrive.json5 application/json5 2024-06-12 15:58:31.596 - info: host.haussteuerung iobroker upload [17] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigPgsql.json5 jsonConfigPgsql.json5 application/json5 2024-06-12 15:58:31.607 - info: host.haussteuerung iobroker upload [16] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigRedis.json5 jsonConfigRedis.json5 application/json5 2024-06-12 15:58:31.615 - info: host.haussteuerung iobroker upload [15] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigRestore.json5 jsonConfigRestore.json5 application/json5 2024-06-12 15:58:31.622 - info: host.haussteuerung iobroker upload [14] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigSqlite.json5 jsonConfigSqlite.json5 application/json5 2024-06-12 15:58:31.631 - info: host.haussteuerung iobroker upload [13] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigWebdav.json5 jsonConfigWebdav.json5 application/json5 2024-06-12 15:58:31.639 - info: host.haussteuerung iobroker upload [12] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/jsonConfigZigbee2mqtt.json5 jsonConfigZigbee2mqtt.json5 application/json5 2024-06-12 15:58:31.647 - info: host.haussteuerung iobroker upload [11] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/manifest.json manifest.json application/json 2024-06-12 15:58:31.654 - info: host.haussteuerung iobroker upload [10] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/css/main.bd1167d4.css static/css/main.bd1167d4.css text/css 2024-06-12 15:58:31.660 - info: host.haussteuerung iobroker upload [9] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/css/main.bd1167d4.css.map static/css/main.bd1167d4.css.map application/json 2024-06-12 15:58:31.667 - info: host.haussteuerung iobroker upload [8] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/js/main.ecef4f21.js static/js/main.ecef4f21.js application/javascript 2024-06-12 15:58:32.096 - info: host.haussteuerung iobroker upload [7] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/js/main.ecef4f21.js.LICENSE.txt static/js/main.ecef4f21.js.LICENSE.txt text/plain 2024-06-12 15:58:32.104 - info: host.haussteuerung iobroker upload [6] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/js/main.ecef4f21.js.map static/js/main.ecef4f21.js.map application/json 2024-06-12 15:58:39.987 - info: host.haussteuerung iobroker upload [5] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/static/media/history.d21dcfa508bd8a624c85.png static/media/history.d21dcfa508bd8a624c85.png image/png 2024-06-12 15:58:40.166 - info: host.haussteuerung iobroker upload [4] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/style.css style.css text/css 2024-06-12 15:58:40.197 - info: host.haussteuerung iobroker upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/tab_m.css tab_m.css text/css 2024-06-12 15:58:40.218 - info: host.haussteuerung iobroker upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/tab_m.html tab_m.html text/html 2024-06-12 15:58:40.236 - info: host.haussteuerung iobroker upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/tab_m.js tab_m.js application/javascript 2024-06-12 15:58:40.275 - info: host.haussteuerung iobroker upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript 2024-06-12 15:58:41.340 - info: host.haussteuerung iobroker exit 0 2024-06-12 15:59:22.328 - warn: node-red.0 (2097) Read-only state "awtrix-light.1.apps.sonnig.visible" has been written without ack-flag with value "true" 2024-06-12 15:59:22.373 - warn: node-red.0 (2097) Read-only state "awtrix-light.1.apps.taghell.visible" has been written without ack-flag with value "false" 2024-06-12 15:59:22.373 - warn: node-red.0 (2097) Read-only state "awtrix-light.1.apps.wolkig.visible" has been written without ack-flag with value "false" 2024-06-12 15:59:22.373 - warn: node-red.0 (2097) Read-only state "awtrix-light.1.apps.nacht.visible" has been written without ack-flag with value "false"============ Mark until here for C&P =============
iob diag has finished.
-
der blockiert admin
@homezecke sagte in Admin port blockiert:tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 107 8249 1027/motion
und der das web
@homezecke sagte in Admin port blockiert:
0 0 :::**8082** :::* LISTEN 1001 157325 15136/io.**admin.0**tcp6
aber wieso ist admin auf 8082?
-
@homoran sagte in Admin port blockiert:
aber wieso ist admin auf 8082?
Keine Ahnung.. Also ich war's nicht!
Aber wie kann man das wieder hinbiegen? Motioneye ist gestoppt aber wie es aussieht Motion läuft noch. Wie kriege ich das gestoppt, damit der den Admin nicht blockiert?Grüße...
-
@homezecke sagte in Admin port blockiert:
Wie kriege ich das gestoppt, damit der den Admin nicht blockiert?
einen anderen Port zuweisen.
Danach kannst du dem admin.0 wieder die 8081 und dann dem web.0 die 8082 zuweisen.
-
Danke! Der Tipp mit Motion hat geholfen! Ich habe Motion deinstalliert, und nach reboot waren die Ports wieder frei!
Ich dachte, wenn Motioneye nicht läuft, dann ist auch motion nicht aktiv.Grüße
-
tcp 0 0 127.0.0.1:8081 0.0.0.0:* LISTEN 107 8249 1027/motion tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 107 8250 1027/motionDa laufen (mindestens) 2 Prozesse.
-
@thomas-braun Ja, danke. Durch das entfernen von motion, sind alle ports wieder frei.
Grüße..
