Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. Neuer Adapter für Roborock-Staubsauger

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.4k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.0k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    15
    1
    2.6k

Neuer Adapter für Roborock-Staubsauger

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
923 Beiträge 136 Kommentatoren 325.5k Aufrufe 125 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • F Offline
    F Offline
    frankyboy73
    schrieb am zuletzt editiert von
    #358

    Hi, beim Adapterstart kommen jetzt auch einige Fehlermeldungen bei mir, mit denen ich leider nichts anfangen kann.

    2023-12-30 11:26:22.292 - info: roborock.0 (2773) starting. Version 0.4.4 (non-npm: copystring/ioBroker.roborock#dev) in /opt/iobroker/node_modules/iobroker.roborock, node: v18.19.0, js-controller: 5.0.17
    2023-12-30 11:26:28.041 - info: roborock.0 (2773) MQTT initialized
    2023-12-30 11:26:34.835 - warn: roborock.0 (2773) Restart initiated
    2023-12-30 11:26:34.887 - info: roborock.0 (2773) terminating
    2023-12-30 11:26:34.889 - info: roborock.0 (2773) Terminated (NO_ERROR): Without reason
    2023-12-30 11:26:35.341 - info: roborock.0 (2773) terminating
    2023-12-30 11:26:35.469 - error: roborock.0 (2773) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:26:35.470 - error: roborock.0 (2773) unhandled promise rejection: Connection is closed.
    2023-12-30 11:26:35.477 - error: roborock.0 (2773) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:26:35.479 - error: roborock.0 (2773) Connection is closed.
    2023-12-30 11:26:35.501 - error: roborock.0 (2773) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:26:35.504 - error: roborock.0 (2773) unhandled promise rejection: Connection is closed.
    2023-12-30 11:26:35.505 - error: roborock.0 (2773) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:26:35.505 - error: roborock.0 (2773) Connection is closed.
    2023-12-30 11:26:35.508 - error: roborock.0 (2773) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:26:35.509 - error: roborock.0 (2773) unhandled promise rejection: Connection is closed.
    2023-12-30 11:26:35.509 - error: roborock.0 (2773) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:26:35.510 - error: roborock.0 (2773) Connection is closed.
    2023-12-30 11:26:35.512 - error: roborock.0 (2773) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:26:35.513 - error: roborock.0 (2773) unhandled promise rejection: Connection is closed.
    2023-12-30 11:26:35.513 - error: roborock.0 (2773) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:26:35.514 - error: roborock.0 (2773) Connection is closed.
    2023-12-30 11:26:35.516 - error: roborock.0 (2773) Failed to get home details: Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:26:35.680 - error: host.raspberrypi Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:26:35.681 - error: host.raspberrypi Caught by controller[1]: Error: Connection is closed.
    2023-12-30 11:26:35.681 - error: host.raspberrypi Caught by controller[1]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:26:35.682 - error: host.raspberrypi Caught by controller[1]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:26:35.682 - error: host.raspberrypi Caught by controller[1]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:26:35.682 - error: host.raspberrypi Caught by controller[1]: at Socket.emit (node:events:517:28)
    2023-12-30 11:26:35.682 - error: host.raspberrypi Caught by controller[1]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:26:35.682 - error: host.raspberrypi Caught by controller[1]: at TCP. (node:net:350:12)
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[3]: Error: Connection is closed.
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[3]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[3]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[3]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:26:35.683 - error: host.raspberrypi Caught by controller[3]: at Socket.emit (node:events:517:28)
    2023-12-30 11:26:35.684 - error: host.raspberrypi Caught by controller[3]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:26:35.684 - error: host.raspberrypi Caught by controller[3]: at TCP. (node:net:350:12)
    2023-12-30 11:26:35.684 - error: host.raspberrypi Caught by controller[4]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: Error: Connection is closed.
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: at Socket.emit (node:events:517:28)
    2023-12-30 11:26:35.685 - error: host.raspberrypi Caught by controller[5]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[5]: at TCP. (node:net:350:12)
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[6]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[7]: Error: Connection is closed.
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[7]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[7]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:26:35.686 - error: host.raspberrypi Caught by controller[7]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:26:35.687 - error: host.raspberrypi Caught by controller[7]: at Socket.emit (node:events:517:28)
    2023-12-30 11:26:35.687 - error: host.raspberrypi Caught by controller[7]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:26:35.687 - error: host.raspberrypi Caught by controller[7]: at TCP. (node:net:350:12)
    2023-12-30 11:26:35.687 - info: host.raspberrypi instance system.adapter.roborock.0 terminated with code 0 (NO_ERROR)
    2023-12-30 11:26:35.688 - info: host.raspberrypi Restart adapter system.adapter.roborock.0 because enabled
    2023-12-30 11:26:49.585 - info: alexa2.0 (2138) Subscribing to states...
    2023-12-30 11:26:51.574 - info: alexa2.0 (2138) Alexa-Push-Connection (macDms = true) established. Disable Polling
    2023-12-30 11:27:05.795 - info: host.raspberrypi instance system.adapter.roborock.0 started with pid 2789
    2023-12-30 11:27:15.131 - info: alexa2.0 (2138) Initialization Done ...
    2023-12-30 11:27:16.019 - info: roborock.0 (2789) starting. Version 0.4.4 (non-npm: copystring/ioBroker.roborock#dev) in /opt/iobroker/node_modules/iobroker.roborock, node: v18.19.0, js-controller: 5.0.17
    2023-12-30 11:27:21.940 - info: roborock.0 (2789) MQTT initialized
    2023-12-30 11:27:27.682 - warn: roborock.0 (2789) Restart initiated
    2023-12-30 11:27:27.697 - info: roborock.0 (2789) terminating
    2023-12-30 11:27:27.700 - info: roborock.0 (2789) Terminated (NO_ERROR): Without reason
    2023-12-30 11:27:28.189 - info: roborock.0 (2789) terminating
    2023-12-30 11:27:28.220 - error: roborock.0 (2789) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:27:28.221 - error: roborock.0 (2789) unhandled promise rejection: Connection is closed.
    2023-12-30 11:27:28.228 - error: roborock.0 (2789) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:27:28.229 - error: roborock.0 (2789) Connection is closed.
    2023-12-30 11:27:28.251 - error: roborock.0 (2789) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:27:28.252 - error: roborock.0 (2789) unhandled promise rejection: Connection is closed.
    2023-12-30 11:27:28.253 - error: roborock.0 (2789) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:27:28.253 - error: roborock.0 (2789) Connection is closed.
    2023-12-30 11:27:28.256 - error: roborock.0 (2789) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:27:28.257 - error: roborock.0 (2789) unhandled promise rejection: Connection is closed.
    2023-12-30 11:27:28.257 - error: roborock.0 (2789) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:27:28.258 - error: roborock.0 (2789) Connection is closed.
    2023-12-30 11:27:28.260 - error: roborock.0 (2789) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
    2023-12-30 11:27:28.261 - error: roborock.0 (2789) unhandled promise rejection: Connection is closed.
    2023-12-30 11:27:28.262 - error: roborock.0 (2789) Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:27:28.262 - error: roborock.0 (2789) Connection is closed.
    2023-12-30 11:27:28.264 - error: roborock.0 (2789) Failed to get home details: Error: Connection is closed.
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP. (node:net:350:12)
    2023-12-30 11:27:28.369 - error: host.raspberrypi Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:27:28.370 - error: host.raspberrypi Caught by controller[1]: Error: Connection is closed.
    2023-12-30 11:27:28.370 - error: host.raspberrypi Caught by controller[1]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:27:28.371 - error: host.raspberrypi Caught by controller[1]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:27:28.371 - error: host.raspberrypi Caught by controller[1]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:27:28.371 - error: host.raspberrypi Caught by controller[1]: at Socket.emit (node:events:517:28)
    2023-12-30 11:27:28.371 - error: host.raspberrypi Caught by controller[1]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:27:28.372 - error: host.raspberrypi Caught by controller[1]: at TCP. (node:net:350:12)
    2023-12-30 11:27:28.372 - error: host.raspberrypi Caught by controller[2]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:27:28.372 - error: host.raspberrypi Caught by controller[3]: Error: Connection is closed.
    2023-12-30 11:27:28.372 - error: host.raspberrypi Caught by controller[3]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:27:28.373 - error: host.raspberrypi Caught by controller[3]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:27:28.373 - error: host.raspberrypi Caught by controller[3]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:27:28.373 - error: host.raspberrypi Caught by controller[3]: at Socket.emit (node:events:517:28)
    2023-12-30 11:27:28.373 - error: host.raspberrypi Caught by controller[3]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:27:28.374 - error: host.raspberrypi Caught by controller[3]: at TCP. (node:net:350:12)
    2023-12-30 11:27:28.374 - error: host.raspberrypi Caught by controller[4]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:27:28.374 - error: host.raspberrypi Caught by controller[5]: Error: Connection is closed.
    2023-12-30 11:27:28.374 - error: host.raspberrypi Caught by controller[5]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:27:28.375 - error: host.raspberrypi Caught by controller[5]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:27:28.375 - error: host.raspberrypi Caught by controller[5]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:27:28.375 - error: host.raspberrypi Caught by controller[5]: at Socket.emit (node:events:517:28)
    2023-12-30 11:27:28.375 - error: host.raspberrypi Caught by controller[5]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:27:28.376 - error: host.raspberrypi Caught by controller[5]: at TCP. (node:net:350:12)
    2023-12-30 11:27:28.376 - error: host.raspberrypi Caught by controller[6]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
    2023-12-30 11:27:28.377 - error: host.raspberrypi Caught by controller[7]: Error: Connection is closed.
    2023-12-30 11:27:28.377 - error: host.raspberrypi Caught by controller[7]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    2023-12-30 11:27:28.377 - error: host.raspberrypi Caught by controller[7]: at Socket. (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    2023-12-30 11:27:28.377 - error: host.raspberrypi Caught by controller[7]: at Object.onceWrapper (node:events:632:26)
    2023-12-30 11:27:28.378 - error: host.raspberrypi Caught by controller[7]: at Socket.emit (node:events:517:28)
    2023-12-30 11:27:28.378 - error: host.raspberrypi Caught by controller[7]: at Socket.emit (node:domain:489:12)
    2023-12-30 11:27:28.378 - error: host.raspberrypi Caught by controller[7]: at TCP. (node:net:350:12)
    2023-12-30 11:27:28.378 - info: host.raspberrypi instance system.adapter.roborock.0 terminated with code 0 (NO_ERROR)
    2023-12-30 11:27:28.379 - info: host.raspberrypi Restart adapter system.adapter.roborock.0 because enabled
    2023-12-30 11:27:58.499 - info: host.raspberrypi instance system.adapter.roborock.0 started with pid 2815
    2023-12-30 11:28:06.811 - info: roborock.0 (2815) starting. Version 0.4.4 (non-npm: copystring/ioBroker.roborock#dev) in /opt/iobroker/node_modules/iobroker.roborock, node: v18.19.0, js-controller: 5.0.17
    2023-12-30 11:28:12.744 - info: roborock.0 (2815) MQTT initialized
    2023-12-30 11:30:12.088 - info: broadlink2.0 (2256) interface to be used: { netmaskBits: 24, address: '192.168.5.10/24', addrs: [ 192, 168, 5, 10 ], cidr: '192.168.5.10/24', bcaddr: '192.168.5.255'
    }:
    2023-12-30 11:30:12.090 - info: broadlink2.0 (2256) discover [ '192.168.5.86' ] from 0.0.0.0:56805
    2023-12-30 11:30:30.675 - info: admin.0 (2027) ==> Connected system.user.admin from ::ffff:192.168.5.76
    2023-12-30 11:30:34.936 - info: host.raspberrypi Updating repository "Stable (default)" under "http://download.iobroker.net/sources-dist.json"
    2023-12-30 11:31:14.449 - info: admin.0 (2027) <== Disconnect system.user.admin from ::ffff:192.168.5.76
    2023-12-30 11:31:36.295 - info: roborock.0 (2815) State value to set for "roborock.0.Devices.3H1RtzirmjxWDKKt6bcR9P.programs.1850557.items.0.id" has to be type "string" but received type "number"
    2023-12-30 11:31:36.297 - info: roborock.0 (2815) State value to set for "roborock.0.Devices.3H1RtzirmjxWDKKt6bcR9P.programs.1850557.items.0.finishDpIds" has to be type "string" but received type "object"
    2023-12-30 11:31:36.367 - info: roborock.0 (2815) State value to set for "roborock.0.Devices.3H1RtzirmjxWDKKt6bcR9P.programs.1850517.items.0.id" has to be type "string" but received type "number"
    2023-12-30 11:31:36.411 - info: roborock.0 (2815) State value to set for "roborock.0.Devices.3H1RtzirmjxWDKKt6bcR9P.programs.1850517.items.0.finishDpIds" has to be type "string" but received type "object"
    2023-12-30 11:31:46.221 - warn: roborock.0 (2815) Failed to execute get_fw_features on robot 3H1RtzirmjxWDKKt6bcR9P Error: Local request with id 0 with method get_fw_features timed out after 10 seconds for response.102
    2023-12-30 11:31:46.226 - warn: roborock.0 (2815) Failed to execute get_status on robot 3H1RtzirmjxWDKKt6bcR9P Error: Local request with id 1 with method get_status timed out after 10 seconds for response.102
    2023-12-30 11:31:46.257 - warn: roborock.0 (2815) Failed to execute get_clean_summary on robot 3H1RtzirmjxWDKKt6bcR9P Error: Local request with id 2 with method get_clean_summary timed out after 10 seconds for response.102
    2023-12-30 11:32:36.173 - error: roborock.0 (2815) Failed to execute get_status on robot 3H1RtzirmjxWDKKt6bcR9P Unsupported attribute: kct of get_status with value 0. Please contact the dev to add the newly found attribute of your robot.
    
    

    Schöne Grüße Frank

    1 Antwort Letzte Antwort
    0
    • F Offline
      F Offline
      frankyboy73
      schrieb am zuletzt editiert von
      #359

      Hi, es gab gestern noch mal ne neue DEV seit dem sind die Fehlermeldungen bei mir weg. Der Roboter lässt sich auch wieder steuern.
      Nur das Problem, das ich "set_custom_mode" und "set_water_box_custom"_mode nicht setzen kann bzw. das nicht übernommen wird, besteht weiter.

      2024-01-01 10:09:59.900 - warn: roborock.0 (20830) Failed to execute set_water_box_custom_mode on robot 3H1RtzirmjxWDKKt6bcR9P Error: Local request with id 9790 with method 9791 timed out after 10 seconds for response.102
      2024-01-01 10:10:04.691 - warn: roborock.0 (20830) Failed to execute set_custom_mode on robot 3H1RtzirmjxWDKKt6bcR9P Error: Local request with id 9792 with method 9793 timed out after 10 seconds for response.102
      

      Schöne Grüße Frank

      1 Antwort Letzte Antwort
      0
      • F Offline
        F Offline
        frankyboy73
        schrieb am zuletzt editiert von frankyboy73
        #360

        Hi, kann mir jemand sagen, was ich in den Datenpunkt "startprogram" reinschreiben muss damit ein Programm gestartet wird? Ich habe es mit einem String probiert (Programmname), das klappt aber leider nicht. Wenn ich direkt im Datenpunkt das Programm über das Auswahlmenü setzte klappt es aber.

        robo1.jpg

        robo2.jpg

        Edit: Hat sich erledigt, ich habs gefunden. Man muss einfach die Programmnummer als String in den Datenpunkt schreiben,

        Schöne Grüße Frank

        1 Antwort Letzte Antwort
        0
        • S Offline
          S Offline
          stefu87_CH
          schrieb am zuletzt editiert von
          #361

          Hallo zusammen

          Ich bin auf der Suche nach einer Lösung für mein Problem und wollte mich mal bei euch erkundigen, ob ich der einzige bin oder ob es noch andere gibt.
          Folgendes Thema:
          Ich habe einen Roborock S8 Pro Ultra. Habe mit dem Adapter Roborock und Mihome-Vaccum versucht und bei beiden Adaptern bekomme ich keine Meldungen von der Station. In den App's wird aber jeweils angezeigt, wenn z.B. der Wasserbehälter leer ist.
          Im Log erhalte ich auch keine Meldungen dazu. Bei mir bleibt der Wert im Adapter unverändert.
          Ist das bei einem Anwender von euch auch so?

          8 x Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
          Gigabyte mit Proxmox
          LXC Container mit Iobroker

          copystringC 1 Antwort Letzte Antwort
          0
          • S stefu87_CH

            Hallo zusammen

            Ich bin auf der Suche nach einer Lösung für mein Problem und wollte mich mal bei euch erkundigen, ob ich der einzige bin oder ob es noch andere gibt.
            Folgendes Thema:
            Ich habe einen Roborock S8 Pro Ultra. Habe mit dem Adapter Roborock und Mihome-Vaccum versucht und bei beiden Adaptern bekomme ich keine Meldungen von der Station. In den App's wird aber jeweils angezeigt, wenn z.B. der Wasserbehälter leer ist.
            Im Log erhalte ich auch keine Meldungen dazu. Bei mir bleibt der Wert im Adapter unverändert.
            Ist das bei einem Anwender von euch auch so?

            copystringC Offline
            copystringC Offline
            copystring
            schrieb am zuletzt editiert von
            #362

            @stefu87_ch Der Adapter kann das aktuell nicht. Vielleicht finde ich irgendwann Zeit dafür, das einzubauen.

            Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
            https://paypal.me/copystring

            M 1 Antwort Letzte Antwort
            0
            • copystringC copystring

              @stefu87_ch Der Adapter kann das aktuell nicht. Vielleicht finde ich irgendwann Zeit dafür, das einzubauen.

              M Offline
              M Offline
              michael 1975
              schrieb am zuletzt editiert von michael 1975
              #363

              @copystring der kann oder könnte das schon unter Dock Erros Status ist e eine bestimmte Zahl,
              nur leider geht bei mir im Moment gar nichts. Ich habe im Log folgendes stehen
              Failed to get home details: TypeError: Cannot read properties of null (reading 'rrHomeId')
              nach einem Neustart obwohl der Adapter grün ist.
              @copystring hast du vielleicht dafür eine Lösung.

              Gruß Michael

              S 1 Antwort Letzte Antwort
              0
              • M michael 1975

                @copystring der kann oder könnte das schon unter Dock Erros Status ist e eine bestimmte Zahl,
                nur leider geht bei mir im Moment gar nichts. Ich habe im Log folgendes stehen
                Failed to get home details: TypeError: Cannot read properties of null (reading 'rrHomeId')
                nach einem Neustart obwohl der Adapter grün ist.
                @copystring hast du vielleicht dafür eine Lösung.

                Gruß Michael

                S Offline
                S Offline
                stefu87_CH
                schrieb am zuletzt editiert von
                #364

                @michael-1975 also bei mir ist beim Adapter Roborock und MiHome-vaccum jeweils eine 0 drin und steht ok. Auch wenn in der Station der Wassertank leer ist.

                8 x Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
                Gigabyte mit Proxmox
                LXC Container mit Iobroker

                M 1 Antwort Letzte Antwort
                0
                • S stefu87_CH

                  @michael-1975 also bei mir ist beim Adapter Roborock und MiHome-vaccum jeweils eine 0 drin und steht ok. Auch wenn in der Station der Wassertank leer ist.

                  M Offline
                  M Offline
                  michael 1975
                  schrieb am zuletzt editiert von
                  #365

                  @stefu87_ch bei mir hat er bis vor 3 4 Tagen dort eine 38 oder39 reingeschrieben und diese zeigt dann Wassertank leer an hat super geklappt kam immer eine Meldung auf der Vis.
                  Nur geht seither leider gar nichts mehr nicht einmal Starten und keiner weis warum so wie es aussieht.

                  S copystringC 2 Antworten Letzte Antwort
                  0
                  • M michael 1975

                    @stefu87_ch bei mir hat er bis vor 3 4 Tagen dort eine 38 oder39 reingeschrieben und diese zeigt dann Wassertank leer an hat super geklappt kam immer eine Meldung auf der Vis.
                    Nur geht seither leider gar nichts mehr nicht einmal Starten und keiner weis warum so wie es aussieht.

                    S Offline
                    S Offline
                    stefu87_CH
                    schrieb am zuletzt editiert von
                    #366

                    @michael-1975 ok das ist speziell ja. Also ich hatte vor ca 4 Tagen ein FW Update auf dem Sauger. Ich verwende eigentlich MiHome Adapter und dann kann ich starten. Aber aus Intresse ob es bei Roborock klappt mit der Station habe ich testweise mal den Adapter installiert, aber ohne Erfolg

                    8 x Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
                    Gigabyte mit Proxmox
                    LXC Container mit Iobroker

                    1 Antwort Letzte Antwort
                    0
                    • M michael 1975

                      @stefu87_ch bei mir hat er bis vor 3 4 Tagen dort eine 38 oder39 reingeschrieben und diese zeigt dann Wassertank leer an hat super geklappt kam immer eine Meldung auf der Vis.
                      Nur geht seither leider gar nichts mehr nicht einmal Starten und keiner weis warum so wie es aussieht.

                      copystringC Offline
                      copystringC Offline
                      copystring
                      schrieb am zuletzt editiert von
                      #367

                      @michael-1975 said in Neuer Adapter für Roborock-Staubsauger:

                      Nur geht seither leider gar nichts mehr nicht einmal Starten und keiner weis warum so wie es aussieht.

                      Das stimmt nicht so ganz. Es gibt aktuell zwei Probleme. Eins davon ist bereits gelöst. Aber wie ersten Post geschrieben, werde ich mich nicht um Fehler des Adapters über das Forum kümmern.
                      Für das zweite ausstehende Problem kannst du sehr gerne mithelfen, das Problem einzugrenzen, indem du hier nachschaust: https://github.com/copystring/ioBroker.roborock/issues/449#issuecomment-1871173235
                      Wenn du den Fehler reproduzieren kannst, erstell doch bitte ein vollständiges Debuglog mit der aktuellen dev-Version von GitHub https://github.com/copystring/ioBroker.roborock/tree/dev in dem der Fehler zu sehen ist.
                      In der aktuellen dev-Version sind bereits einige Fehler behoben.

                      Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
                      https://paypal.me/copystring

                      M 1 Antwort Letzte Antwort
                      0
                      • copystringC copystring

                        @michael-1975 said in Neuer Adapter für Roborock-Staubsauger:

                        Nur geht seither leider gar nichts mehr nicht einmal Starten und keiner weis warum so wie es aussieht.

                        Das stimmt nicht so ganz. Es gibt aktuell zwei Probleme. Eins davon ist bereits gelöst. Aber wie ersten Post geschrieben, werde ich mich nicht um Fehler des Adapters über das Forum kümmern.
                        Für das zweite ausstehende Problem kannst du sehr gerne mithelfen, das Problem einzugrenzen, indem du hier nachschaust: https://github.com/copystring/ioBroker.roborock/issues/449#issuecomment-1871173235
                        Wenn du den Fehler reproduzieren kannst, erstell doch bitte ein vollständiges Debuglog mit der aktuellen dev-Version von GitHub https://github.com/copystring/ioBroker.roborock/tree/dev in dem der Fehler zu sehen ist.
                        In der aktuellen dev-Version sind bereits einige Fehler behoben.

                        M Offline
                        M Offline
                        michael 1975
                        schrieb am zuletzt editiert von
                        #368

                        @copystring danke für die Info ich war bisher nicht wirklich auf Github unterwegs, aber die Lösung mit Objekte löschen und Adapter neustarten hat geholfen danke.
                        @stefu87_CH ich werde berichten ob er mir auch wieder den Wasserstand anzeigt.

                        Gruß Michael

                        S 1 Antwort Letzte Antwort
                        0
                        • M michael 1975

                          @copystring danke für die Info ich war bisher nicht wirklich auf Github unterwegs, aber die Lösung mit Objekte löschen und Adapter neustarten hat geholfen danke.
                          @stefu87_CH ich werde berichten ob er mir auch wieder den Wasserstand anzeigt.

                          Gruß Michael

                          S Offline
                          S Offline
                          stefu87_CH
                          schrieb am zuletzt editiert von
                          #369

                          @michael-1975 also beim Mihome Adapter habe ich jetzt was herausgefunden. Der Status der Station wird erst gesendet, wenn der Sauger einen Befehl bekommt zum reinigen, sonst passiert da nichts.

                          8 x Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
                          Gigabyte mit Proxmox
                          LXC Container mit Iobroker

                          1 Antwort Letzte Antwort
                          0
                          • copystringC Offline
                            copystringC Offline
                            copystring
                            schrieb am zuletzt editiert von
                            #370

                            Hallo Leute,

                            nach viele Arbeit konnte ich es endlich schaffen, 0.5.0 herauszubringen. Danke für das fleißige Testen der dev Version. Dadurch konnte ich diverse Fehler beheben.

                            Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
                            https://paypal.me/copystring

                            FlexerF 1 Antwort Letzte Antwort
                            2
                            • copystringC copystring

                              Hallo Leute,

                              nach viele Arbeit konnte ich es endlich schaffen, 0.5.0 herauszubringen. Danke für das fleißige Testen der dev Version. Dadurch konnte ich diverse Fehler beheben.

                              FlexerF Offline
                              FlexerF Offline
                              Flexer
                              schrieb am zuletzt editiert von
                              #371

                              @copystring Einfach nur Mega Arbeit von Dir! Macht wirklich Spaß wenn man Feedback vom Tester so super umgesetzt bekommt! Vielen Dank!

                              Unterm Strich ist alles besser.


                              Ja, voll geil hier!

                              1 Antwort Letzte Antwort
                              0
                              • copystringC Offline
                                copystringC Offline
                                copystring
                                schrieb am zuletzt editiert von
                                #372

                                Direkt einen Fehler übersehen. 0.5.0 wird leider nie erscheinen. Dafür aber 0.5.1. Sorry :)

                                Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
                                https://paypal.me/copystring

                                1 Antwort Letzte Antwort
                                1
                                • BanditFGB Offline
                                  BanditFGB Offline
                                  BanditFG
                                  schrieb am zuletzt editiert von
                                  #373

                                  ich habe aktuell Version 0.4.4 installiert und viele Fehler im Log, kann mir bitte jemand erklären wie ich auf Version 0.5.1 updaten kann.???

                                  Danke

                                  L 1 Antwort Letzte Antwort
                                  0
                                  • BanditFGB BanditFG

                                    ich habe aktuell Version 0.4.4 installiert und viele Fehler im Log, kann mir bitte jemand erklären wie ich auf Version 0.5.1 updaten kann.???

                                    Danke

                                    L Offline
                                    L Offline
                                    localhorst
                                    schrieb am zuletzt editiert von localhorst
                                    #374

                                    @banditfg
                                    Ich bekomme auch als stable nur die 0.4.4 angeboten.
                                    Die 0.5.1 kannst du direkt über diesen Pfad installieren:
                                    https://github.com/copystring/ioBroker.roborock/tree/v0.5.1

                                    Die Dev lief nun bei mir mit meinem Q8 Max Plus eine ganze Weile schon total stabil.
                                    Die direkte Verbindung zum Roborock ohne Cloud macht das ganze echt rocksolid.
                                    Auch nach dem Update auf die 0.5.1 war er sofort wieder erreichbar.
                                    Top Job und nochmals tausend Dank an copystring!

                                    1 Antwort Letzte Antwort
                                    0
                                    • copystringC Offline
                                      copystringC Offline
                                      copystring
                                      schrieb am zuletzt editiert von
                                      #375

                                      0.5.1 ist nur in latest verfügbar. In stable noch nicht.

                                      Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
                                      https://paypal.me/copystring

                                      A 1 Antwort Letzte Antwort
                                      0
                                      • copystringC copystring

                                        0.5.1 ist nur in latest verfügbar. In stable noch nicht.

                                        A Offline
                                        A Offline
                                        andibr
                                        schrieb am zuletzt editiert von
                                        #376

                                        also bei mir verursacht der 0.5.1 folgenden Fehler:

                                        roborock.0
                                        	2024-01-04 14:07:07.858	error	Failed to get home details: TypeError: Cannot read properties of null (reading 'rrHomeId') at Roborock.onReady (/opt/iobroker/node_modules/iobroker.roborock/main.js:184:41) at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
                                        roborock.0
                                        	2024-01-04 14:07:07.444	info	starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.roborock, node: v18.19.0, js-controller: 5.0.17
                                        

                                        Ich habe einen Roborock S7 Max Ultra, der Datenpunkt Online zeigt abwechselnd immer mal wieder "false". Das obwohl der W-Lan Accesspoint eigentlich über der Docking-Station hängt und der Sauger drin steht.

                                        1 Antwort Letzte Antwort
                                        0
                                        • copystringC Offline
                                          copystringC Offline
                                          copystring
                                          schrieb am zuletzt editiert von
                                          #377

                                          Sorry für den schlechten Release 0.5.1. Ich habe den wieder gelöscht. 0.5.0 kam ohnehin nie raus. Bitte installiert 0.4.4, wenn die bei euch läuft. Ich kümmere mich um einen neuen Release. Habe leider aktuell nur wenig Zeit.

                                          Unterstütze meine Arbeit gerne mit einer Spende über PayPal:
                                          https://paypal.me/copystring

                                          T 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate
                                          FAQ Cloud / IOT
                                          HowTo: Node.js-Update
                                          HowTo: Backup/Restore
                                          Downloads
                                          BLOG

                                          928

                                          Online

                                          32.4k

                                          Benutzer

                                          81.4k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe