VIS 2 lässt sich nicht installieren
-
@alveran bitte die Langfassung von
iob diag -
Huuuu… Fehler liegt an der Wurzel… evtl…?
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
root@iobroker1:~# npm i iobroker.vis-2
hier sind direkt 2 dicke Hunde!
du läufst als root durch die Landschaft was zu Rechteverbiegung führen kann.
Du stehst im falschen Verzeichnis und installierst im Home des root. -
@alveran sagte in VIS 2 lässt sich nicht installieren:
Bin echt ratlos. Es scheint als wenn der Adapter im Hintergrund gar nicht richtig installiert wurde.
Ich bin auch ratlos, warum immer wieder der Murks mit dem root gemacht wird...
Es wird sich NICHT als root angemeldet. Nie, gar nicht, unter keinen Umständen.Der Adapter wird im Hintergrund schon 'richtig' installiert, und zwar 'richtig' mit den falschen Rechten im falschen Verzeichnis.
-
@thomas-braun sagte in VIS 2 lässt sich nicht installieren:
@alveran sagte in VIS 2 lässt sich nicht installieren:
Bin echt ratlos. Es scheint als wenn der Adapter im Hintergrund gar nicht richtig installiert wurde.
Ich bin auch ratlos, warum immer wieder der Murks mit dem root gemacht wird...
Es wird sich NICHT als root angemeldet. Nie, gar nicht, unter keinen Umständen.Der Adapter wird im Hintergrund schon 'richtig' installiert, und zwar 'richtig' mit den falschen Rechten im falschen Verzeichnis.
...und der arme Systemuser iobroker steht vor verschlossenen Türen und darf da nicht ran
-
OK ich versuche es gleich nochmal ohne root und im richtigen Verzeichnis.
Hier die Ausgabe von IOB Diag:
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker1 Icon name: computer-vm Chassis: vm Virtualization: vmware Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-22-amd64 Architecture: x86-64 model name : 12th Gen Intel(R) Core(TM) i5-1240P Docker : false Virtualization : vmware Kernel : x86_64 Userland : amd64 Systemuptime and Load: 18:37:55 up 1 day, 22:58, 1 user, load average: 0.22, 0.25, 0.29 CPU threads: 2 *** Time and Time Zones *** Local time: Sun 2023-12-17 18:37:55 CET Universal time: Sun 2023-12-17 17:37:55 UTC RTC time: Sun 2023-12-17 17:37:55 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** alveran /home/alveran alveran cdrom floppy sudo audio dip video plugdev netdev iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.0G 2.3G 320M 0.0K 389M 554M Swap: 2.0G 456M 1.6G Total: 5.0G 2.7G 1.9G 2975 M total memory 2265 M used memory 474 M active memory 1941 M inactive memory 320 M free memory 152 M buffer memory 236 M swap cache 2045 M total swap 456 M used swap 1589 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.5G 0 1.5G 0% /dev tmpfs tmpfs 298M 692K 297M 1% /run /dev/sda1 ext4 18G 12G 5.6G 67% / tmpfs tmpfs 1.5G 0 1.5G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 298M 0 298M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Dec 15 19:39:13 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [Fri Dec 15 19:39:14 2023] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 834M /var/ 448M /var/cache 439M /var/cache/apt 367M /var/cache/apt/archives 243M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 24.0M in the file system. /opt/iobroker/backups: 243M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.6G /opt/iobroker/iobroker-data/ 1.1G /opt/iobroker/iobroker-data/history 343M /opt/iobroker/iobroker-data/files 91M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 29M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 11M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 /usr/bin/corepack 0.17.0 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages *** 18.16.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.energiefluss@3.5.0 /opt/iobroker/node_modules/iobroker.energiefluss npm ERR! invalid: iobroker.milight@0.4.0 /opt/iobroker/node_modules/iobroker.milight npm ERR! invalid: iobroker.vis-2@2.9.6 /opt/iobroker/node_modules/iobroker.vis-2 npm ERR! invalid: xmlbuilder@0.4.2 /opt/iobroker/node_modules/homematic-xmlrpc/node_modules/xmlbuilder npm ERR! A complete log of this run can be found in: npm ERR! /home/alveran/.npm/_logs/2023-12-17T17_38_00_252Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.energiefluss@3.5.0 /opt/iobroker/node_modules/iobroker.energiefluss npm ERR! invalid: iobroker.milight@0.4.0 /opt/iobroker/node_modules/iobroker.milight npm ERR! invalid: iobroker.vis-2@2.9.6 /opt/iobroker/node_modules/iobroker.vis-2 npm ERR! A complete log of this run can be found in: npm ERR! /home/alveran/.npm/_logs/2023-12-17T17_38_08_398Z-debug-0.log Adapters from github: 3 Adapter State + system.adapter.accuweather.0 : accuweather : iobroker1 - enabled + system.adapter.admin.0 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled system.adapter.devices.0 : devices : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.ebus.0 : ebus : iobroker1 - enabled system.adapter.energiefluss.0 : energiefluss : iobroker1 - disabled system.adapter.feiertage.0 : feiertage : iobroker1 - enabled system.adapter.flot.0 : flot : iobroker1 - enabled system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - disabled + system.adapter.history.0 : history : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hs100.0 : hs100 : iobroker1 - enabled + system.adapter.hue.0 : hue : iobroker1 - enabled, port: 443 system.adapter.ical.0 : ical : iobroker1 - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker1 - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker1 - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker1 - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker1 - enabled + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iqontrol.0 : iqontrol : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled + system.adapter.mclighting.0 : mclighting : iobroker1 - enabled, port: 81 system.adapter.mclighting.1 : mclighting : iobroker1 - disabled, port: 81 system.adapter.milight.0 : milight : iobroker1 - disabled, port: 5987 + system.adapter.modbus.0 : modbus : iobroker1 - enabled + system.adapter.modbus.2 : modbus : iobroker1 - enabled + system.adapter.mqtt.0 : mqtt : iobroker1 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker1 - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : iobroker1 - disabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.smartmeter.0 : smartmeter : iobroker1 - enabled + system.adapter.socketio.0 : socketio : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker1 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled + system.adapter.vis-2.0 : vis-2 : iobroker1 - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker1 - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker1 - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - enabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iobroker1 - enabled + system.adapter.worx.0 : worx : iobroker1 - enabled system.adapter.ws.0 : ws : iobroker1 - disabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : iobroker1 - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker1 - enabled, port: 443 + system.adapter.mclighting.0 : mclighting : iobroker1 - enabled, port: 81 + system.adapter.mqtt.0 : mqtt : iobroker1 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker1 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker1 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.3.1 , installed 1.3.1 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "apcups" : 1.0.15 , installed 1.0.15 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ebus" : 3.2.4 , installed 3.2.4 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "landroid" : 1.0.3 , installed 1.0.3 Adapter "mclighting" : 0.1.2 , installed 0.1.2 Adapter "milight" : 0.4.0 , installed 0.4.0 Adapter "modbus" : 5.0.11 , installed 6.1.0 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 0.4.5 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.0.0 , installed 3.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "wled" : 0.7.1 , installed 0.7.1 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 15072 States: 14524 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://ftp.debian.org/debian bullseye-backports InRelease Hit:3 http://deb.debian.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://repo.ebusd.eu/apt/default/buster buster InRelease Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 98 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 110 3941380 3586043/proftpd: (a tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12412 589/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1002 6424089 1707440/node-red tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 13358 622/ebusd tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 13359 622/ebusd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 12262 870/exim4 tcp 0 0 192.168.6.222:2010 0.0.0.0:* LISTEN 1002 6425697 1707659/io.hm-rpc.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1002 6424142 1707477/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1002 6424972 1707507/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1002 6424668 1707337/iobroker.js tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 109 12430 520/redis-server 12 tcp 0 0 192.168.6.222:2001 0.0.0.0:* LISTEN 1002 6425030 1707537/io.hm-rpc.0 tcp6 0 0 :::8082 :::* LISTEN 1002 6425814 1707674/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1002 6425540 1707712/io.socketio tcp6 0 0 :::22 :::* LISTEN 0 12423 589/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 12263 870/exim4 tcp6 0 0 ::1:6379 :::* LISTEN 109 12431 520/redis-server 12 tcp6 0 0 :::80 :::* LISTEN 1002 6424090 1707440/node-red tcp6 0 0 :::8081 :::* LISTEN 1002 6423921 1707355/io.admin.0 udp 0 0 0.0.0.0:49335 0.0.0.0:* 108 12091 488/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1002 6429912 1708647/io.wled.0 udp 0 0 192.168.6.222:5353 0.0.0.0:* 1002 6425648 1707644/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12089 488/avahi-daemon: r udp6 0 0 :::38867 :::* 108 12092 488/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12090 488/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-17 18:23:07.774 - info: host.iobroker1 iobroker host.iobroker1 object vis-2.0.control.data created 2023-12-17 18:23:07.776 - info: host.iobroker1 iobroker host.iobroker1 object system.adapter.vis-2.0 created 2023-12-17 18:23:08.786 - info: host.iobroker1 iobroker exit 0 2023-12-17 18:23:10.878 - info: host.iobroker1 instance system.adapter.vis-2.0 started with pid 1722861 2023-12-17 18:23:12.033 - info: vis-2.0 (1722861) starting. Version 2.9.6 (non-npm: ioBroker/ioBroker.vis-2#44f1694cb4d0167bc09452b97d8c43705405ef31) in /opt/iobroker/node_modules/iobroker.vis-2, node: v18.16.0, js-controller: 5.0.16 2023-12-17 18:23:12.052 - error: vis-2.0 (1722861) Cannot find www folder. Looks like adapter was installed from github! Please install it from npm! 2023-12-17 18:23:19.304 - info: host.iobroker1 stopInstance system.adapter.vis-2.0 (force=false, process=true) 2023-12-17 18:23:19.306 - info: host.iobroker1 stopInstance system.adapter.vis-2.0 send kill signal 2023-12-17 18:23:19.306 - info: vis-2.0 (1722861) Got terminate signal TERMINATE_YOURSELF 2023-12-17 18:23:19.307 - info: vis-2.0 (1722861) terminating 2023-12-17 18:23:19.307 - info: vis-2.0 (1722861) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-12-17 18:23:19.808 - info: vis-2.0 (1722861) terminating 2023-12-17 18:23:19.860 - info: host.iobroker1 instance system.adapter.vis-2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-12-17 18:23:22.360 - info: host.iobroker1 instance system.adapter.vis-2.0 started with pid 1723194 2023-12-17 18:23:23.171 - info: vis-2.0 (1723194) starting. Version 2.9.6 (non-npm: ioBroker/ioBroker.vis-2#44f1694cb4d0167bc09452b97d8c43705405ef31) in /opt/iobroker/node_modules/iobroker.vis-2, node: v18.16.0, js-controller: 5.0.16 2023-12-17 18:23:23.193 - error: vis-2.0 (1723194) Cannot find www folder. Looks like adapter was installed from github! Please install it from npm! 2023-12-17 18:25:00.020 - info: host.iobroker1 instance system.adapter.dwd.0 started with pid 1726710 2023-12-17 18:25:00.804 - info: dwd.0 (1726710) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 5.0.16 2023-12-17 18:25:01.238 - info: dwd.0 (1726710) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-12-17 18:25:01.751 - info: host.iobroker1 instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-12-17 18:30:00.019 - info: host.iobroker1 instance system.adapter.ical.0 started with pid 1737711 2023-12-17 18:30:00.771 - info: ical.0 (1737711) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.16.0, js-controller: 5.0.16 2023-12-17 18:30:01.911 - info: ical.0 (1737711) processing URL: calendar1 https://calendar.google.com/calendar/ical/goeran.kickeritz%40googlemail.com/private-e54d67ed3f8efee7b8046752033283ed/basic.ics 2023-12-17 18:30:07.165 - info: ical.0 (1737711) Terminated (NO_ERROR): Without reason 2023-12-17 18:30:07.677 - info: host.iobroker1 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)============ Mark until here for C&P =============
iob diag has finished.
-
Und das Kommando
npmwird besser auch vermieden. Den Grund siehste hoffentlich selber.. -
Kaum macht man es richtig funktioniert es. Also ohne root und im richtigen Verzeichnis.
Vielen Dank.
Aber warum findet er den Adapter nicht in der Übersicht? -
Nodejs updaten und die Updates für das Betriebssystem auch einspielen.
Und das ebusd-Repo muss auf bullseye gesetzt werden.
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
Mem: 3.0G 2.3G 320M 0.0K 389M 554M
warum so knapp bemessen?
damit kommst du nicht weit!schon gar nicht bei 28 laufenden +x scheduled Instanzen
@alveran sagte in VIS 2 lässt sich nicht installieren:
/home/alveran
geht doch, warum sonst nicht?
(ernstgemeinte Frage!)@alveran sagte in VIS 2 lässt sich nicht installieren:
/usr/bin/node v18.16.0
/usr/bin/npm 9.5.1nicht aktuell!
@alveran sagte in VIS 2 lässt sich nicht installieren:
Pending Updates: 98
auch schon lange nicht mehr angefasst worden?
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
warum findet er den Adapter nicht in der Übersicht?
weil der Adapter noch Beta ist
-
Und wenn nachdem du das ganze Konstrukt gerade gezogen hast diese Meldungen noch auftauchen:
npm ERR! invalid: iobroker.energiefluss@3.5.0 /opt/iobroker/node_modules/iobroker.energiefluss npm ERR! invalid: iobroker.milight@0.4.0 /opt/iobroker/node_modules/iobroker.milight npm ERR! invalid: iobroker.vis-2@2.9.6 /opt/iobroker/node_modules/iobroker.vis-2installierst du die jeweils nochmal.
-
Nachtschicht beendet und Hausaufgaben gemacht
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker1 Icon name: computer-vm Chassis: vm Virtualization: vmware Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-26-amd64 Architecture: x86-64 model name : 12th Gen Intel(R) Core(TM) i5-1240P Docker : false Virtualization : vmware Kernel : x86_64 Userland : amd64 Systemuptime and Load: 11:28:44 up 49 min, 1 user, load average: 0.80, 0.60, 0.31 CPU threads: 2 *** Time and Time Zones *** Local time: Mon 2023-12-18 11:28:44 CET Universal time: Mon 2023-12-18 10:28:44 UTC RTC time: Mon 2023-12-18 10:28:44 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** alveran /home/alveran alveran cdrom floppy sudo audio dip video plugdev netdev iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 5.9G 2.3G 2.3G 0.0K 1.4G 3.3G Swap: 2.0G 0B 2.0G Total: 8.0G 2.3G 4.3G 5929 M total memory 2294 M used memory 684 M active memory 2545 M inactive memory 2285 M free memory 297 M buffer memory 1052 M swap cache 2045 M total swap 0 M used swap 2045 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 2.9G 0 2.9G 0% /dev tmpfs tmpfs 593M 684K 593M 1% /run /dev/sda1 ext4 18G 12G 5.0G 71% / tmpfs tmpfs 2.9G 0 2.9G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 593M 0 593M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 18 10:39:24 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [Mon Dec 18 10:39:24 2023] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,relatime,errors=remount-ro Files in neuralgic directories: /var: 843M /var/ 448M /var/cache 439M /var/cache/apt 367M /var/cache/apt/archives 251M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 24.0M in the file system. /opt/iobroker/backups: 254M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.8G /opt/iobroker/iobroker-data/ 1.1G /opt/iobroker/iobroker-data/history 560M /opt/iobroker/iobroker-data/files 167M /opt/iobroker/iobroker-data/files/vis-2 91M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 19M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.061c8d42.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_015AD341-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main amd64 Packages 500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : iobroker1 - enabled + system.adapter.admin.0 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker1 - enabled + system.adapter.backitup.0 : backitup : iobroker1 - enabled system.adapter.daswetter.0 : daswetter : iobroker1 - enabled system.adapter.devices.0 : devices : iobroker1 - enabled + system.adapter.discovery.0 : discovery : iobroker1 - enabled system.adapter.dwd.0 : dwd : iobroker1 - enabled + system.adapter.ebus.0 : ebus : iobroker1 - enabled system.adapter.feiertage.0 : feiertage : iobroker1 - enabled system.adapter.flot.0 : flot : iobroker1 - enabled system.adapter.fullybrowser.0 : fullybrowser : iobroker1 - disabled + system.adapter.history.0 : history : iobroker1 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker1 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hs100.0 : hs100 : iobroker1 - enabled + system.adapter.hue.0 : hue : iobroker1 - enabled, port: 443 system.adapter.ical.0 : ical : iobroker1 - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker1 - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker1 - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker1 - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker1 - enabled + system.adapter.info.0 : info : iobroker1 - enabled + system.adapter.iqontrol.0 : iqontrol : iobroker1 - enabled + system.adapter.javascript.0 : javascript : iobroker1 - enabled + system.adapter.mclighting.0 : mclighting : iobroker1 - enabled, port: 81 system.adapter.mclighting.1 : mclighting : iobroker1 - disabled, port: 81 + system.adapter.modbus.0 : modbus : iobroker1 - enabled + system.adapter.modbus.2 : modbus : iobroker1 - enabled + system.adapter.mqtt.0 : mqtt : iobroker1 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker1 - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : iobroker1 - disabled + system.adapter.ping.0 : ping : iobroker1 - enabled + system.adapter.smartmeter.0 : smartmeter : iobroker1 - enabled + system.adapter.socketio.0 : socketio : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker1 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : iobroker1 - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker1 - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : iobroker1 - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: iobroker1 - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker1 - enabled system.adapter.vis-2.0 : vis-2 : iobroker1 - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker1 - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker1 - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker1 - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker1 - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker1 - enabled system.adapter.vis.0 : vis : iobroker1 - enabled + system.adapter.web.0 : web : iobroker1 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iobroker1 - enabled + system.adapter.worx.0 : worx : iobroker1 - enabled system.adapter.ws.0 : ws : iobroker1 - disabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : iobroker1 - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker1 - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker1 - enabled, port: 443 + system.adapter.mclighting.0 : mclighting : iobroker1 - enabled, port: 81 + system.adapter.mqtt.0 : mqtt : iobroker1 - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : iobroker1 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : iobroker1 - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : iobroker1 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker1 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.3.1 , installed 1.3.1 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "apcups" : 1.0.15 , installed 1.0.15 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ebus" : 3.2.4 , installed 3.2.4 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hs100" : 2.2.0 , installed 2.2.0 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "landroid" : 1.0.3 , installed 1.0.3 Adapter "mclighting" : 0.1.2 , installed 0.1.2 Adapter "modbus" : 5.0.11 , installed 6.1.0 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "openweathermap": 0.4.5 , installed 1.0.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.0.0 , installed 3.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "wled" : 0.7.1 , installed 0.7.1 Adapter "worx" : 2.3.4 , installed 2.3.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 14918 States: 14498 *** OS-Repositories and Updates *** Hit:1 http://ftp.debian.org/debian bullseye-backports InRelease Hit:2 http://security.debian.org/debian-security bullseye-security InRelease Hit:3 http://deb.debian.org/debian bullseye InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://repo.ebusd.eu/apt/default/buster buster InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1002 130322 69245/iobroker.js-c tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 109 12434 584/redis-server 12 tcp 0 0 192.168.6.222:2001 0.0.0.0:* LISTEN 1002 130723 69447/io.hm-rpc.0 tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 110 10011 686/proftpd: (accep tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12389 594/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1002 131202 69339/node-red tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 10117 608/ebusd tcp 0 0 0.0.0.0:8889 0.0.0.0:* LISTEN 0 10118 608/ebusd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 10094 869/exim4 tcp 0 0 192.168.6.222:2010 0.0.0.0:* LISTEN 1002 132149 69568/io.hm-rpc.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1002 130582 69376/io.sonoff.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1002 130652 69407/io.mqtt.0 tcp6 0 0 ::1:6379 :::* LISTEN 109 12435 584/redis-server 12 tcp6 0 0 :::80 :::* LISTEN 1002 131220 69339/node-red tcp6 0 0 :::8081 :::* LISTEN 1002 129009 69267/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1002 132225 69583/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1002 131858 69613/io.socketio.0 tcp6 0 0 :::22 :::* LISTEN 0 12392 594/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 10095 869/exim4 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1002 134853 70535/io.wled.0 udp 0 0 192.168.6.222:5353 0.0.0.0:* 1002 131679 69553/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 9923 573/avahi-daemon: r udp 0 0 0.0.0.0:43794 0.0.0.0:* 108 9925 573/avahi-daemon: r udp6 0 0 :::5353 :::* 108 9924 573/avahi-daemon: r udp6 0 0 :::42311 :::* 108 9926 573/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-18 11:28:13.355 - info: host.iobroker1 iobroker host.iobroker1 Counted 1 states (system.adapter.milight.*) from states 2023-12-18 11:28:14.182 - info: host.iobroker1 iobroker host.iobroker1 file vis/widgets/milight deleted 2023-12-18 11:28:14.195 - info: host.iobroker1 iobroker host.iobroker1 file vis/widgets/milight.html deleted 2023-12-18 11:28:14.202 - info: host.iobroker1 iobroker host.iobroker1 file vis-2/widgets/milight deleted 2023-12-18 11:28:14.212 - info: host.iobroker1 iobroker host.iobroker1 file vis-2/widgets/milight.html deleted 2023-12-18 11:28:14.219 - info: host.iobroker1 iobroker host.iobroker1 file milight.admin deleted 2023-12-18 11:28:14.225 - info: host.iobroker1 iobroker host.iobroker1 object milight deleted 2023-12-18 11:28:14.228 - info: host.iobroker1 iobroker host.iobroker1 object milight.admin deletedhost.iobroker1 Deleting 3 object(s). 2023-12-18 11:28:14.252 - info: host.iobroker1 iobroker host.iobroker1 Deleting 1 state(s). 2023-12-18 11:28:19.316 - info: host.iobroker1 iobroker removed 4 packages, and changed 1 package in 5s210 packages are looking for funding run `npm fund` for details 2023-12-18 11:28:19.350 - info: host.iobroker1 "system.adapter.vis.0" disabled 2023-12-18 11:28:19.361 - info: host.iobroker1 "system.adapter.vis.0" enabled 2023-12-18 11:28:19.383 - info: host.iobroker1 iobroker Adapter "system.adapter.vis.0" restarted. 2023-12-18 11:28:20.065 - info: vis.0 (73236) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.16 2023-12-18 11:28:20.339 - info: vis.0 (73236) config.js changed. Upload. 2023-12-18 11:28:20.399 - info: host.iobroker1 iobroker exit 0 2023-12-18 11:28:20.431 - info: vis.0 (73236) Changes in index.html detected => update cache.manifest 2023-12-18 11:28:20.437 - info: vis.0 (73236) Upload vis anew, while changes detected... 2023-12-18 11:28:21.272 - info: host.iobroker1 "system.adapter.vis.0" disabled 2023-12-18 11:28:21.272 - info: host.iobroker1 stopInstance system.adapter.vis.0 (force=false, process=true) 2023-12-18 11:28:21.280 - info: host.iobroker1 "system.adapter.vis.0" enabled 2023-12-18 11:28:21.280 - info: host.iobroker1 stopInstance system.adapter.vis.0 (force=false, process=true) 2023-12-18 11:28:28.124 - info: vis.0 (73236) Uploaded. 0 2023-12-18 11:28:28.626 - info: vis.0 (73236) Terminated (NO_ERROR): Without reason 2023-12-18 11:28:29.176 - info: host.iobroker1 instance system.adapter.vis.0 terminated while should be started once ======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker1 Icon name: computer-vm Chassis: vm Virtualization: vmware Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.0-26-amd64 Architecture: x86-64 Installation: vmware Kernel: x86_64 Userland: amd64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 5.9G 2.3G 2.2G 0.0K 1.4G 3.3G Swap: 2.0G 0B 2.0G Total: 8.0G 2.3G 4.3G Active iob-Instances: 29 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: + system.adapter.admin.0 : admin : iobroker1 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker1 - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 14918 States: 14498 Size of iob-Database: 24M /opt/iobroker/iobroker-data/objects.jsonl 11M /opt/iobroker/iobroker-data/objects.json.migrated 11M /opt/iobroker/iobroker-data/objects.json.bak.migrated 8.0K /opt/iobroker/iobroker-data/states.json.bak 4.0K /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ==================== -
@alveran sagte in VIS 2 lässt sich nicht installieren:
Setz den user noch indie adm-Gruppe.
sudo usermod -a -G adm alveranUnd setzt das BootTarget:
sudo systemctl set-default multi-user.target -
@alveran sagte in VIS 2 lässt sich nicht installieren:
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye ServerUnd was ist mit dem los?
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable]
Update das auf die aktuelle Version.
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
Hit:5 https://repo.ebusd.eu/apt/default/buster buster InRelease
Stell das auf bullseye um.
-
@thomas-braun said in VIS 2 lässt sich nicht installieren:
@alveran sagte in VIS 2 lässt sich nicht installieren:
Hit:5 https://repo.ebusd.eu/apt/default/buster buster InRelease
Stell das auf bullseye um.
OK. Wie mach ich das? Hab dazu leider nichts gefunden.
-
@thomas-braun said in VIS 2 lässt sich nicht installieren:
@alveran sagte in VIS 2 lässt sich nicht installieren:
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * motioneye.service loaded failed failed motionEye ServerUnd was ist mit dem los?
Motioneye habe ich deinstalliert, keine Ahnung warum er den Service immer noch starten will. Gibt es eine Art Autostart Liste?
-
@alveran sagte in VIS 2 lässt sich nicht installieren:
motioneye.service
sudo systemctl disable motioneye.service sudo systemctl mask motioneye.service
