BackItUp erstellt keine backups mehr
-
Üblicherweise ist es Port 22.
-
Üblicherweise ist es Port 22.
@thomas-braun said in BackItUp erstellt keine backups mehr:
Üblicherweise ist es Port 22.
so. bin jetzt drauf. musste ssh starten.
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:03:16 up 13 min, 2 users, load average: 1.04, 1.36, 1.08 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-12-04 18:03:16 CET Universal time: Mon 2023-12-04 17:03:16 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** ronny /home/ronny ronny adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin docker gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 660M 128M 1.6G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.5G 760M 3794 M total memory 1520 M used memory 2271 M active memory 428 M inactive memory 660 M free memory 138 M buffer memory 1474 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * rc-local.service loaded failed failed /etc/rc.local Compatibility LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 15G 13G 55% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 3.4M 756M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 16K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 4 17:49:55 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=D8:3A:DD:16:F4:39 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e446591d-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Dec 4 17:49:56 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon Dec 4 17:49:56 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon Dec 4 17:49:57 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon Dec 4 17:49:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 4 17:49:57 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 4 17:50:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 10G /var/ 7.6G /var/lib 7.4G /var/lib/docker 6.9G /var/lib/docker/overlay2 1.2G /var/log/journal/55f00fb070744f2da4bf0d8a099975a6 Archived and active journals take up 1.1G in the file system. /opt/iobroker/backups: 196M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 205M /opt/iobroker/iobroker-data/ 155M /opt/iobroker/iobroker-data/files 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static 47M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 12M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : raspberrypi - enabled + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 192.168.178.58 + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.solax.0 : solax : raspberrypi - enabled + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 192.168.178.58 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.3.1 , installed 1.3.1 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "solax" : 0.8.0 , installed 0.8.0 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-icontwo" : 0.98.0 , installed 0.98.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Objects and States Please stand by - This may take a while Objects: 3135 States: 3111 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://download.docker.com/linux/debian bullseye InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.58:1883 0.0.0.0:* LISTEN 1002 20354 3429/io.mqtt.0 tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15448 951/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 23613 3593/sshd: /usr/sbi tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15447 951/smbd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 11746 547/cupsd tcp 0 0 0.0.0.0:7190 0.0.0.0:* LISTEN 0 18017 1552/docker-proxy tcp 0 0 0.0.0.0:7194 0.0.0.0:* LISTEN 0 17908 1369/docker-proxy tcp 0 0 0.0.0.0:3100 0.0.0.0:* LISTEN 0 17964 1465/docker-proxy tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1002 15968 733/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1002 16007 733/iobroker.js-con tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN 0 17067 1514/docker-proxy tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 11130 577/vncserver-x11-c tcp6 0 0 :::139 :::* LISTEN 0 15446 951/smbd tcp6 0 0 :::22 :::* LISTEN 0 23615 3593/sshd: /usr/sbi tcp6 0 0 :::445 :::* LISTEN 0 13274 951/smbd tcp6 0 0 :::3000 :::* LISTEN 116 16296 732/grafana tcp6 0 0 :::7190 :::* LISTEN 0 18545 1559/docker-proxy tcp6 0 0 :::7194 :::* LISTEN 0 17911 1376/docker-proxy tcp6 0 0 :::3100 :::* LISTEN 0 17967 1471/docker-proxy tcp6 0 0 :::4000 :::* LISTEN 0 17072 1522/docker-proxy tcp6 0 0 :::8081 :::* LISTEN 1002 22110 3489/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1002 22130 3535/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 15368 564/influxd tcp6 0 0 ::1:631 :::* LISTEN 0 11745 547/cupsd tcp6 0 0 :::5900 :::* LISTEN 0 11129 577/vncserver-x11-c udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15318 480/dhcpcd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23297 550/nmbd udp 0 0 169.254.251.49:137 0.0.0.0:* 0 23296 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23293 550/nmbd udp 0 0 169.254.224.59:137 0.0.0.0:* 0 23292 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23289 550/nmbd udp 0 0 169.254.176.113:137 0.0.0.0:* 0 23288 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23285 550/nmbd udp 0 0 169.254.166.163:137 0.0.0.0:* 0 23284 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23281 550/nmbd udp 0 0 169.254.137.51:137 0.0.0.0:* 0 23280 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23277 550/nmbd udp 0 0 169.254.124.18:137 0.0.0.0:* 0 23276 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23273 550/nmbd udp 0 0 169.254.88.37:137 0.0.0.0:* 0 23272 550/nmbd udp 0 0 172.19.255.255:137 0.0.0.0:* 0 17877 550/nmbd udp 0 0 172.19.0.1:137 0.0.0.0:* 0 17876 550/nmbd udp 0 0 172.17.255.255:137 0.0.0.0:* 0 17873 550/nmbd udp 0 0 172.17.0.1:137 0.0.0.0:* 0 17872 550/nmbd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 13186 550/nmbd udp 0 0 192.168.178.58:137 0.0.0.0:* 0 13185 550/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 12987 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23299 550/nmbd udp 0 0 169.254.251.49:138 0.0.0.0:* 0 23298 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23295 550/nmbd udp 0 0 169.254.224.59:138 0.0.0.0:* 0 23294 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23291 550/nmbd udp 0 0 169.254.176.113:138 0.0.0.0:* 0 23290 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23287 550/nmbd udp 0 0 169.254.166.163:138 0.0.0.0:* 0 23286 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23283 550/nmbd udp 0 0 169.254.137.51:138 0.0.0.0:* 0 23282 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23279 550/nmbd udp 0 0 169.254.124.18:138 0.0.0.0:* 0 23278 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23275 550/nmbd udp 0 0 169.254.88.37:138 0.0.0.0:* 0 23274 550/nmbd udp 0 0 172.19.255.255:138 0.0.0.0:* 0 17879 550/nmbd udp 0 0 172.19.0.1:138 0.0.0.0:* 0 17878 550/nmbd udp 0 0 172.17.255.255:138 0.0.0.0:* 0 17875 550/nmbd udp 0 0 172.17.0.1:138 0.0.0.0:* 0 17874 550/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 13188 550/nmbd udp 0 0 192.168.178.58:138 0.0.0.0:* 0 13187 550/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 12988 550/nmbd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 11761 620/cups-browsed udp 0 0 0.0.0.0:33728 0.0.0.0:* 108 12911 414/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12909 414/avahi-daemon: r udp6 0 0 :::546 :::* 0 13087 480/dhcpcd udp6 0 0 :::41701 :::* 108 12912 414/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12910 414/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-04 17:51:54.035 - info: tesla-motors.0 (3601) Session loaded 2023-12-04 17:51:54.036 - info: tesla-motors.0 (3601) Refresh session 2023-12-04 17:51:54.991 - info: tesla-motors.0 (3601) Receive device list 2023-12-04 17:51:55.323 - info: tesla-motors.0 (3601) Found 1 devices 2023-12-04 17:51:56.689 - info: accuweather.0 (3616) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.accuweather, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:51:56.876 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.energy_cost_breakdown.home.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.252 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points17.values05.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.253 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points17.values06.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.279 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points24.values05.raw_value" has to be type "string" but received type "number" 2023-12-04 17:51:57.283 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points24.values06.raw_value" has to be type "string" but received type "number" 2023-12-04 17:51:58.296 - info: host.raspberrypi instance system.adapter.vis-inventwo.0 started with pid 3633 2023-12-04 17:52:00.793 - info: vis-inventwo.0 (3633) starting. Version 3.3.3 in /opt/iobroker/node_modules/iobroker.vis-inventwo, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:03.015 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJ3xxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 17:52:03.411 - info: host.raspberrypi instance system.adapter.solax.0 started with pid 3649 2023-12-04 17:52:05.781 - info: solax.0 (3649) starting. Version 0.8.0 in /opt/iobroker/node_modules/iobroker.solax, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:06.872 - info: host.raspberrypi instance system.adapter.backitup.0 started with pid 3665 2023-12-04 17:52:09.178 - info: backitup.0 (3665) starting. Version 2.8.7 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:09.278 - info: backitup.0 (3665) [iobroker] backup will be activated at 02:40 every 1 day(s) 2023-12-04 17:52:09.683 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 17:53:56.485 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 17:54:38.261 - info: admin.0 (3489) ==> Connected system.user.admin from ::ffff:192.168.178.20 2023-12-04 17:57:09.577 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 18:01:56.126 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 18:02:09.564 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 18:03:02.529 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" -
@thomas-braun said in BackItUp erstellt keine backups mehr:
Üblicherweise ist es Port 22.
so. bin jetzt drauf. musste ssh starten.
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 18:03:16 up 13 min, 2 users, load average: 1.04, 1.36, 1.08 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-12-04 18:03:16 CET Universal time: Mon 2023-12-04 17:03:16 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** ronny /home/ronny ronny adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin docker gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 660M 128M 1.6G 2.1G Swap: 99M 0B 99M Total: 3.9G 1.5G 760M 3794 M total memory 1520 M used memory 2271 M active memory 428 M inactive memory 660 M free memory 138 M buffer memory 1474 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * rc-local.service loaded failed failed /etc/rc.local Compatibility LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 15G 13G 55% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 3.4M 756M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 380M 16K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 4 17:49:55 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:1680x1050M@60 smsc95xx.macaddr=D8:3A:DD:16:F4:39 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e446591d-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Mon Dec 4 17:49:56 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Mon Dec 4 17:49:56 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Mon Dec 4 17:49:57 2023] EXT4-fs (mmcblk0p2): recovery complete [Mon Dec 4 17:49:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 4 17:49:57 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 4 17:50:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 10G /var/ 7.6G /var/lib 7.4G /var/lib/docker 6.9G /var/lib/docker/overlay2 1.2G /var/log/journal/55f00fb070744f2da4bf0d8a099975a6 Archived and active journals take up 1.1G in the file system. /opt/iobroker/backups: 196M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 205M /opt/iobroker/iobroker-data/ 155M /opt/iobroker/iobroker-data/files 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static 47M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 12M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : raspberrypi - enabled + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 192.168.178.58 + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.solax.0 : solax : raspberrypi - enabled + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt-client.0 : mqtt-client : raspberrypi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 192.168.178.58 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.3.1 , installed 1.3.1 Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "mqtt-client" : 1.6.5 , installed 1.6.5 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "solax" : 0.8.0 , installed 0.8.0 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-icontwo" : 0.98.0 , installed 0.98.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Objects and States Please stand by - This may take a while Objects: 3135 States: 3111 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://apt.grafana.com stable InRelease Hit:6 https://download.docker.com/linux/debian bullseye InRelease Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.58:1883 0.0.0.0:* LISTEN 1002 20354 3429/io.mqtt.0 tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15448 951/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 23613 3593/sshd: /usr/sbi tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15447 951/smbd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 11746 547/cupsd tcp 0 0 0.0.0.0:7190 0.0.0.0:* LISTEN 0 18017 1552/docker-proxy tcp 0 0 0.0.0.0:7194 0.0.0.0:* LISTEN 0 17908 1369/docker-proxy tcp 0 0 0.0.0.0:3100 0.0.0.0:* LISTEN 0 17964 1465/docker-proxy tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1002 15968 733/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1002 16007 733/iobroker.js-con tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN 0 17067 1514/docker-proxy tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 0 11130 577/vncserver-x11-c tcp6 0 0 :::139 :::* LISTEN 0 15446 951/smbd tcp6 0 0 :::22 :::* LISTEN 0 23615 3593/sshd: /usr/sbi tcp6 0 0 :::445 :::* LISTEN 0 13274 951/smbd tcp6 0 0 :::3000 :::* LISTEN 116 16296 732/grafana tcp6 0 0 :::7190 :::* LISTEN 0 18545 1559/docker-proxy tcp6 0 0 :::7194 :::* LISTEN 0 17911 1376/docker-proxy tcp6 0 0 :::3100 :::* LISTEN 0 17967 1471/docker-proxy tcp6 0 0 :::4000 :::* LISTEN 0 17072 1522/docker-proxy tcp6 0 0 :::8081 :::* LISTEN 1002 22110 3489/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1002 22130 3535/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 15368 564/influxd tcp6 0 0 ::1:631 :::* LISTEN 0 11745 547/cupsd tcp6 0 0 :::5900 :::* LISTEN 0 11129 577/vncserver-x11-c udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15318 480/dhcpcd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23297 550/nmbd udp 0 0 169.254.251.49:137 0.0.0.0:* 0 23296 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23293 550/nmbd udp 0 0 169.254.224.59:137 0.0.0.0:* 0 23292 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23289 550/nmbd udp 0 0 169.254.176.113:137 0.0.0.0:* 0 23288 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23285 550/nmbd udp 0 0 169.254.166.163:137 0.0.0.0:* 0 23284 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23281 550/nmbd udp 0 0 169.254.137.51:137 0.0.0.0:* 0 23280 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23277 550/nmbd udp 0 0 169.254.124.18:137 0.0.0.0:* 0 23276 550/nmbd udp 0 0 169.254.255.255:137 0.0.0.0:* 0 23273 550/nmbd udp 0 0 169.254.88.37:137 0.0.0.0:* 0 23272 550/nmbd udp 0 0 172.19.255.255:137 0.0.0.0:* 0 17877 550/nmbd udp 0 0 172.19.0.1:137 0.0.0.0:* 0 17876 550/nmbd udp 0 0 172.17.255.255:137 0.0.0.0:* 0 17873 550/nmbd udp 0 0 172.17.0.1:137 0.0.0.0:* 0 17872 550/nmbd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 13186 550/nmbd udp 0 0 192.168.178.58:137 0.0.0.0:* 0 13185 550/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 12987 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23299 550/nmbd udp 0 0 169.254.251.49:138 0.0.0.0:* 0 23298 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23295 550/nmbd udp 0 0 169.254.224.59:138 0.0.0.0:* 0 23294 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23291 550/nmbd udp 0 0 169.254.176.113:138 0.0.0.0:* 0 23290 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23287 550/nmbd udp 0 0 169.254.166.163:138 0.0.0.0:* 0 23286 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23283 550/nmbd udp 0 0 169.254.137.51:138 0.0.0.0:* 0 23282 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23279 550/nmbd udp 0 0 169.254.124.18:138 0.0.0.0:* 0 23278 550/nmbd udp 0 0 169.254.255.255:138 0.0.0.0:* 0 23275 550/nmbd udp 0 0 169.254.88.37:138 0.0.0.0:* 0 23274 550/nmbd udp 0 0 172.19.255.255:138 0.0.0.0:* 0 17879 550/nmbd udp 0 0 172.19.0.1:138 0.0.0.0:* 0 17878 550/nmbd udp 0 0 172.17.255.255:138 0.0.0.0:* 0 17875 550/nmbd udp 0 0 172.17.0.1:138 0.0.0.0:* 0 17874 550/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 13188 550/nmbd udp 0 0 192.168.178.58:138 0.0.0.0:* 0 13187 550/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 12988 550/nmbd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 11761 620/cups-browsed udp 0 0 0.0.0.0:33728 0.0.0.0:* 108 12911 414/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12909 414/avahi-daemon: r udp6 0 0 :::546 :::* 0 13087 480/dhcpcd udp6 0 0 :::41701 :::* 108 12912 414/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12910 414/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-04 17:51:54.035 - info: tesla-motors.0 (3601) Session loaded 2023-12-04 17:51:54.036 - info: tesla-motors.0 (3601) Refresh session 2023-12-04 17:51:54.991 - info: tesla-motors.0 (3601) Receive device list 2023-12-04 17:51:55.323 - info: tesla-motors.0 (3601) Found 1 devices 2023-12-04 17:51:56.689 - info: accuweather.0 (3616) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.accuweather, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:51:56.876 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.energy_cost_breakdown.home.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.252 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points17.values05.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.253 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points17.values06.raw_value" has to be type "number" but received type "string" 2023-12-04 17:51:57.279 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points24.values05.raw_value" has to be type "string" but received type "number" 2023-12-04 17:51:57.283 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.charge_history.charging_history_graph.data_points24.values06.raw_value" has to be type "string" but received type "number" 2023-12-04 17:51:58.296 - info: host.raspberrypi instance system.adapter.vis-inventwo.0 started with pid 3633 2023-12-04 17:52:00.793 - info: vis-inventwo.0 (3633) starting. Version 3.3.3 in /opt/iobroker/node_modules/iobroker.vis-inventwo, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:03.015 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJ3xxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 17:52:03.411 - info: host.raspberrypi instance system.adapter.solax.0 started with pid 3649 2023-12-04 17:52:05.781 - info: solax.0 (3649) starting. Version 0.8.0 in /opt/iobroker/node_modules/iobroker.solax, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:06.872 - info: host.raspberrypi instance system.adapter.backitup.0 started with pid 3665 2023-12-04 17:52:09.178 - info: backitup.0 (3665) starting. Version 2.8.7 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.19.0, js-controller: 5.0.16 2023-12-04 17:52:09.278 - info: backitup.0 (3665) [iobroker] backup will be activated at 02:40 every 1 day(s) 2023-12-04 17:52:09.683 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 17:53:56.485 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 17:54:38.261 - info: admin.0 (3489) ==> Connected system.user.admin from ::ffff:192.168.178.20 2023-12-04 17:57:09.577 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 18:01:56.126 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string" 2023-12-04 18:02:09.564 - info: solax.0 (3649) State value to set for "solax.0.data.json" has to be type "string" but received type "number" 2023-12-04 18:03:02.529 - info: tesla-motors.0 (3601) State value to set for "tesla-motors.0.5YJxxx.vehicle_state.media_info.now_playing_source" has to be type "number" but received type "string"Immer sauber rebooten, nie einfach vom Strom reißen.
-
@ronk
War eigentlich ein allgemeiner Hinweis zum Umgang mit einem Betriebssystem. Die mögen das alle nicht. -
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.6G 485M 129M 1.7G 1.9G Swap: 99M 0B 99M Total: 3.9G 1.6G 585M Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3135 States: 3110 Size of iob-Database: 12M /opt/iobroker/iobroker-data/objects.jsonl 1.1M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
Influx db Sicherung läuft nun. Richtiger Token hilft. In Grafana finde ich keinen Token. Wo kann ich einen erstellen?
@ronk sagte in BackItUp erstellt keine backups mehr:
Wo kann ich einen erstellen?
Service Accounts --> Add service account (Role "Admin") --> Token
-
@ronk sagte in BackItUp erstellt keine backups mehr:
Wo kann ich einen erstellen?
Service Accounts --> Add service account (Role "Admin") --> Token
-
Danke. Display name auch admin? Oder ist das egal?
-
-
@homoran sagte in BackItUp erstellt keine backups mehr:
passt das zusammen?
https://forum.iobroker.net/topic/68975/backitup-arbeit-einfach-nicht-mehr/8Ne, die Fehlermeldung ist aus meiner Sicht eindeutig, der Mount mountet nicht. Auch wenn @Eulo sagt, dass es daran nicht liegen kann.
@Eulo kannst du denn manuell mounten?
@marc-berg wie mounte ich denn manuell?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden308
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge