NEWS
ioBroker neu aufgesetzt, VIS läßt sich nicht installieren
Installation
22
Beiträge
4
Kommentatoren
1.8k
Aufrufe
3
Watching
-
iob add vis@1.4.10@thomas-braun
gleicher Fehlerpi@raspip:/opt/iobroker $ iob add vis@1.4.10 NPM version: 10.2.3 Installing iobroker.vis@1.4.10... (System call) npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c node main.js --install npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-12-05T14_08_10_927Z-debug-0.log host.raspip Cannot install iobroker.vis@1.4.10: 6 pi@raspip:/opt/iobroker $Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
gleicher Fehlerpi@raspip:/opt/iobroker $ iob add vis@1.4.10 NPM version: 10.2.3 Installing iobroker.vis@1.4.10... (System call) npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c node main.js --install npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-12-05T14_08_10_927Z-debug-0.log host.raspip Cannot install iobroker.vis@1.4.10: 6 pi@raspip:/opt/iobroker $iob add vis -
iob add vis@thomas-braun
:anguished:pi@raspip:/opt/iobroker $ iob add vis NPM version: 10.2.3 Installing iobroker.vis@1.4.16... (System call) npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c node main.js --install npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-12-05T14_10_26_946Z-debug-0.log host.raspip Cannot install iobroker.vis@1.4.16: 6 pi@raspip:/opt/iobroker $oder mit "sudo..."
Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
:anguished:pi@raspip:/opt/iobroker $ iob add vis NPM version: 10.2.3 Installing iobroker.vis@1.4.16... (System call) npm ERR! code 6 npm ERR! path /opt/iobroker/node_modules/iobroker.vis npm ERR! command failed npm ERR! command sh -c node main.js --install npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-12-05T14_10_26_946Z-debug-0.log host.raspip Cannot install iobroker.vis@1.4.16: 6 pi@raspip:/opt/iobroker $oder mit "sudo..."
-
Musste man in der VIS Version nicht noch weiter zurückgehen? 1.4.6 oder so?
-
@thomas-braun
ist aber viel...======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspip Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi6-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 15:13:13 up 45 min, 3 users, load average: 4.47, 3.79, 3.11 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-05 15:13:13 CET Universal time: Tue 2023-12-05 14:13:13 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: LXDE-pi-wayfire Terminal: wayland Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 865M 164M 964M 1.5G Swap: 104M 0B 104M Total: 4.1G 2.4G 970M 3792 M total memory 2319 M used memory 2545 M active memory 114 M inactive memory 825 M free memory 14 M buffer memory 905 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/sda2 ext4 235G 6.5G 216G 3% / tmpfs tmpfs 1.9G 30M 1.9G 2% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Dec 5 14:27:14 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:45:C1:49 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=fa6f7a9b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Tue Dec 5 14:27:19 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Dec 5 14:27:21 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 846M /var/ 474M /var/cache 467M /var/cache/apt 355M /var/cache/apt/archives 201M /var/lib Archived and active journals take up 68.3M in the file system. /opt/iobroker/backups: 7.9M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 200M /opt/iobroker/iobroker-data/ 172M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static 33M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 19M /opt/iobroker/iobroker-data/objects.jsonl 9.1M /opt/iobroker/iobroker-data/states.jsonl 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspip - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspip - enabled system.adapter.daswetter.0 : daswetter : raspip - disabled + system.adapter.discovery.0 : discovery : raspip - disabled + system.adapter.ds18b20.0 : ds18b20 : raspip - enabled + system.adapter.email.0 : email : raspip - enabled system.adapter.enet.0 : enet : raspip - disabled system.adapter.flot.0 : flot : raspip - disabled + system.adapter.fritzbox.0 : fritzbox : raspip - enabled + system.adapter.history.0 : history : raspip - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspip - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspip - disabled + system.adapter.info.0 : info : raspip - enabled + system.adapter.javascript.0 : javascript : raspip - enabled system.adapter.js2fs.0 : js2fs : raspip - disabled system.adapter.mobile.0 : mobile : raspip - disabled + system.adapter.mqtt.0 : mqtt : raspip - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspip - enabled + system.adapter.pushover.0 : pushover : raspip - enabled system.adapter.scenes.0 : scenes : raspip - disabled + system.adapter.shelly.0 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspip - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : raspip - enabled + system.adapter.tr-064.0 : tr-064 : raspip - enabled system.adapter.vis-bars.0 : vis-bars : raspip - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspip - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspip - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspip - disabled system.adapter.vis-map.0 : vis-map : raspip - disabled system.adapter.vis-plumb.0 : vis-plumb : raspip - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspip - disabled system.adapter.vis-weather.0 : vis-weather : raspip - disabled system.adapter.vis.0 : vis : raspip - disabled + system.adapter.web.0 : web : raspip - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspip - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspip - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspip - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspip - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspip - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.4 [Updatable] Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "enet" : 1.0.1 , installed 1.0.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.6 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 8452 States: 7611 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 1000 17168 1172/wayvnc tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 26659 2337/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 24950 2399/io.mqtt.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16743 837/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17241 838/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17234 838/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15061 851/sshd: /usr/sbin tcp6 0 0 :::36677 :::* LISTEN 1001 22418 2262/io.yahka.0 tcp6 0 0 :::8087 :::* LISTEN 1001 25745 2322/io.simple-api. tcp6 0 0 :::8081 :::* LISTEN 1001 19175 1496/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 25652 2277/io.web.0 tcp6 0 0 :::44761 :::* LISTEN 1001 22420 2262/io.yahka.0 tcp6 0 0 :::42731 :::* LISTEN 1001 22416 2262/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 15063 851/sshd: /usr/sbin tcp6 0 0 :::85 :::* LISTEN 1001 68478 35823/io.javascript tcp6 0 0 ::1:631 :::* LISTEN 0 16742 837/cupsd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17822 1102/cups-browsed udp 0 0 224.0.0.251:5353 0.0.0.0:* 1000 54348 21022/chromium-brow udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 17478 636/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 24781 2352/io.shelly.0 udp 0 0 0.0.0.0:44617 0.0.0.0:* 104 17480 636/avahi-daemon: r udp6 0 0 fe80::e5ae:efc9:6f6:546 :::* 0 17878 744/NetworkManager udp6 0 0 :::5353 :::* 104 17479 636/avahi-daemon: r udp6 0 0 :::40997 :::* 104 17481 636/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-05 15:14:34.042 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:34.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LGes:119444.89 kWh 2023-12-05 15:14:34.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Delta:302.89 2023-12-05 15:14:34.046 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Verbrauch % tolastYear: 12.61 2023-12-05 15:14:34.748 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LCur:372.70 W 2023-12-05 15:14:36.086 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:37.009 - warn: ds18b20.0 (3363) Error reading sensor 10-000801ef2087: Error: No temperature read 2023-12-05 15:14:37.041 - warn: ds18b20.0 (3363) Error reading sensor 10-000801d0136f: Error: No temperature read 2023-12-05 15:14:38.038 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:38.902 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32.1 Pumpe:0% Wert3:8888 2023-12-05 15:14:40.036 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:41.008 - info: javascript.0 (35823) script.js.common.produktiv.Elco_GW: ..Elco-GW.boiler_water_temperature Wert:30.38 2023-12-05 15:14:42.100 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:43.426 - info: javascript.0 (35823) script.js.common.produktiv.Garten: 0 0 -85 2023-12-05 15:14:43.895 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32 Pumpe:0% Wert3:8888 2023-12-05 15:14:44.043 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:44.044 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LGes:119444.89 kWh 2023-12-05 15:14:44.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Delta:302.89 2023-12-05 15:14:44.046 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Verbrauch % tolastYear: 12.61 2023-12-05 15:14:44.749 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LCur:372.80 W 2023-12-05 15:14:46.031 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:48.072 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:48.893 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32.1 Pumpe:0% Wert3:8888 2023-12-05 15:14:50.033 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:52.066 - info: smartmeter.0 (2307) Received 5 values, 2 updated============ Mark until here for C&P =============
Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
ist aber viel...======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspip Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi6-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 15:13:13 up 45 min, 3 users, load average: 4.47, 3.79, 3.11 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-05 15:13:13 CET Universal time: Tue 2023-12-05 14:13:13 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: LXDE-pi-wayfire Terminal: wayland Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 865M 164M 964M 1.5G Swap: 104M 0B 104M Total: 4.1G 2.4G 970M 3792 M total memory 2319 M used memory 2545 M active memory 114 M inactive memory 825 M free memory 14 M buffer memory 905 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/sda2 ext4 235G 6.5G 216G 3% / tmpfs tmpfs 1.9G 30M 1.9G 2% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Dec 5 14:27:14 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:45:C1:49 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=fa6f7a9b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Tue Dec 5 14:27:19 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Dec 5 14:27:21 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 846M /var/ 474M /var/cache 467M /var/cache/apt 355M /var/cache/apt/archives 201M /var/lib Archived and active journals take up 68.3M in the file system. /opt/iobroker/backups: 7.9M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 200M /opt/iobroker/iobroker-data/ 172M /opt/iobroker/iobroker-data/files 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static 33M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 19M /opt/iobroker/iobroker-data/objects.jsonl 9.1M /opt/iobroker/iobroker-data/states.jsonl 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspip - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspip - enabled system.adapter.daswetter.0 : daswetter : raspip - disabled + system.adapter.discovery.0 : discovery : raspip - disabled + system.adapter.ds18b20.0 : ds18b20 : raspip - enabled + system.adapter.email.0 : email : raspip - enabled system.adapter.enet.0 : enet : raspip - disabled system.adapter.flot.0 : flot : raspip - disabled + system.adapter.fritzbox.0 : fritzbox : raspip - enabled + system.adapter.history.0 : history : raspip - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspip - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspip - disabled + system.adapter.info.0 : info : raspip - enabled + system.adapter.javascript.0 : javascript : raspip - enabled system.adapter.js2fs.0 : js2fs : raspip - disabled system.adapter.mobile.0 : mobile : raspip - disabled + system.adapter.mqtt.0 : mqtt : raspip - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.ping.0 : ping : raspip - enabled + system.adapter.pushover.0 : pushover : raspip - enabled system.adapter.scenes.0 : scenes : raspip - disabled + system.adapter.shelly.0 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspip - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : raspip - enabled + system.adapter.tr-064.0 : tr-064 : raspip - enabled system.adapter.vis-bars.0 : vis-bars : raspip - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspip - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspip - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspip - disabled system.adapter.vis-map.0 : vis-map : raspip - disabled system.adapter.vis-plumb.0 : vis-plumb : raspip - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspip - disabled system.adapter.vis-weather.0 : vis-weather : raspip - disabled system.adapter.vis.0 : vis : raspip - disabled + system.adapter.web.0 : web : raspip - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspip - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspip - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspip - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspip - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspip - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspip - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.4 [Updatable] Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "enet" : 1.0.1 , installed 1.0.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.6 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Objects and States Please stand by - This may take a while Objects: 8452 States: 7611 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:5900 0.0.0.0:* LISTEN 1000 17168 1172/wayvnc tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 26659 2337/io.shelly.1 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 24950 2399/io.mqtt.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16743 837/cupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17241 838/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17234 838/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15061 851/sshd: /usr/sbin tcp6 0 0 :::36677 :::* LISTEN 1001 22418 2262/io.yahka.0 tcp6 0 0 :::8087 :::* LISTEN 1001 25745 2322/io.simple-api. tcp6 0 0 :::8081 :::* LISTEN 1001 19175 1496/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 25652 2277/io.web.0 tcp6 0 0 :::44761 :::* LISTEN 1001 22420 2262/io.yahka.0 tcp6 0 0 :::42731 :::* LISTEN 1001 22416 2262/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 15063 851/sshd: /usr/sbin tcp6 0 0 :::85 :::* LISTEN 1001 68478 35823/io.javascript tcp6 0 0 ::1:631 :::* LISTEN 0 16742 837/cupsd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17822 1102/cups-browsed udp 0 0 224.0.0.251:5353 0.0.0.0:* 1000 54348 21022/chromium-brow udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 17478 636/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 24781 2352/io.shelly.0 udp 0 0 0.0.0.0:44617 0.0.0.0:* 104 17480 636/avahi-daemon: r udp6 0 0 fe80::e5ae:efc9:6f6:546 :::* 0 17878 744/NetworkManager udp6 0 0 :::5353 :::* 104 17479 636/avahi-daemon: r udp6 0 0 :::40997 :::* 104 17481 636/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-05 15:14:34.042 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:34.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LGes:119444.89 kWh 2023-12-05 15:14:34.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Delta:302.89 2023-12-05 15:14:34.046 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Verbrauch % tolastYear: 12.61 2023-12-05 15:14:34.748 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LCur:372.70 W 2023-12-05 15:14:36.086 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:37.009 - warn: ds18b20.0 (3363) Error reading sensor 10-000801ef2087: Error: No temperature read 2023-12-05 15:14:37.041 - warn: ds18b20.0 (3363) Error reading sensor 10-000801d0136f: Error: No temperature read 2023-12-05 15:14:38.038 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:38.902 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32.1 Pumpe:0% Wert3:8888 2023-12-05 15:14:40.036 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:41.008 - info: javascript.0 (35823) script.js.common.produktiv.Elco_GW: ..Elco-GW.boiler_water_temperature Wert:30.38 2023-12-05 15:14:42.100 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:43.426 - info: javascript.0 (35823) script.js.common.produktiv.Garten: 0 0 -85 2023-12-05 15:14:43.895 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32 Pumpe:0% Wert3:8888 2023-12-05 15:14:44.043 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:44.044 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LGes:119444.89 kWh 2023-12-05 15:14:44.045 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Delta:302.89 2023-12-05 15:14:44.046 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: Verbrauch % tolastYear: 12.61 2023-12-05 15:14:44.749 - info: javascript.0 (35823) script.js.common.produktiv.VSM_Zaehlerstand: LCur:372.80 W 2023-12-05 15:14:46.031 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:48.072 - info: smartmeter.0 (2307) Received 5 values, 2 updated 2023-12-05 15:14:48.893 - info: javascript.0 (35823) script.js.common.produktiv.Resol_Reader2: Kollektor:12.2 Speicher:32.1 Pumpe:0% Wert3:8888 2023-12-05 15:14:50.033 - info: smartmeter.0 (2307) Received 5 values, 1 updated 2023-12-05 15:14:52.066 - info: smartmeter.0 (2307) Received 5 values, 2 updated============ Mark until here for C&P =============
Desktop: LXDE-pi-wayfire
Warum läuft da der Desktop? Warum nicht die Lite-Version ohne Desktop installiert?
Schalt das aus!sudo systemctl set-default multi-user.target sudo reboot -
@marc-berg
TOP
mit 1.4.6 gings und dann upgrade:+1: -
@stoffel67 sagte in ioBroker neu aufgesetzt, VIS läßt sich nicht installieren:
mit 1.4.6 gings und dann upgrade
Konnte ich mich doch noch dunkel dran erinnern ...
Noch ein Tipp für die Zukunft: Wenn du den Text aus "iob diag" rauskopierst, sind dort schon Code Tags drin. Wenn du dann nochmals welche setzt, dann sieht das so aus wie bei dir hier (Kraut und Rüben) :-)
NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+EMQX+Grafana
Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN, Arduino, KiCad
Benutzt das Voting im Beitrag, wenn er euch geholfen hat.
-
@stoffel67 sagte in ioBroker neu aufgesetzt, VIS läßt sich nicht installieren:
mit 1.4.6 gings und dann upgrade
Konnte ich mich doch noch dunkel dran erinnern ...
Noch ein Tipp für die Zukunft: Wenn du den Text aus "iob diag" rauskopierst, sind dort schon Code Tags drin. Wenn du dann nochmals welche setzt, dann sieht das so aus wie bei dir hier (Kraut und Rüben) :-)
@marc-berg
Danke, habs zu spät gemerkt:confused:Mein Adapter: JUNG/GIRA eNet-Adapter
-
i@raspip:/opt/iobroker/node_modules/iobroker.enet $ iob update Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.4 [Updatable] Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "enet" : 1.0.1 , installed 1.0.2 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.6 , installed 7.1.4 [Updatable] Controller "js-controller": 5.0.16 , installed 5.0.16 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 pi@raspip:/opt/iobroker/node_modules/iobroker.enet $ pi@raspip:/opt/iobroker/node_modules/iobroker.enet $ pi@raspip:/opt/iobroker/node_modules/iobroker.enet $ iob upgrade vis@1.4.10 Adapter "vis" is not installed.@stoffel67 wo stehst du denn da?
-
@marc-berg
Danke, habs zu spät gemerkt:confused:https://forum.iobroker.net/topic/70508/raspi-4-bootet-extrem-langsam/5?_=1701786641978
Warum fragst du eigentlich, wenn du dann doch was anderes tust?
-
@stoffel67 sagte in ioBroker neu aufgesetzt, VIS läßt sich nicht installieren:
mit 1.4.6 gings und dann upgrade
Konnte ich mich doch noch dunkel dran erinnern ...
Noch ein Tipp für die Zukunft: Wenn du den Text aus "iob diag" rauskopierst, sind dort schon Code Tags drin. Wenn du dann nochmals welche setzt, dann sieht das so aus wie bei dir hier (Kraut und Rüben) :-)
@marc-berg sagte in ioBroker neu aufgesetzt, VIS läßt sich nicht installieren:
Konnte ich mich doch noch dunkel dran erinnern ...
ich nicht :cry:
-
https://forum.iobroker.net/topic/70508/raspi-4-bootet-extrem-langsam/5?_=1701786641978
Warum fragst du eigentlich, wenn du dann doch was anderes tust?
@thomas-braun
das System ist heute komplett gecrasht… und ich hatte noch einen Raspi mit laufender SSD,
das System muss dringend laufen… wegen Hzg-Steuerung
gibt sonst Ärger mit meiner besten „Hälfte“….
werde aber deinen Hinweis ernst nehmen, bitte nicht böse sein.Mein Adapter: JUNG/GIRA eNet-Adapter
-
@thomas-braun
das System ist heute komplett gecrasht… und ich hatte noch einen Raspi mit laufender SSD,
das System muss dringend laufen… wegen Hzg-Steuerung
gibt sonst Ärger mit meiner besten „Hälfte“….
werde aber deinen Hinweis ernst nehmen, bitte nicht böse sein.Dann kannst du es ja jetzt ausschalten.
Und den die shelly-Instanzen würde ich mir auch anschauen, die dürfen nicht beide auf den gleichen Ports lauschen.
-
Dann kannst du es ja jetzt ausschalten.
Und den die shelly-Instanzen würde ich mir auch anschauen, die dürfen nicht beide auf den gleichen Ports lauschen.
@thomas-braun said in ioBroker neu aufgesetzt, VIS läßt sich nicht installieren:
die shelly-Instanzen würde ich mir auch anschauen, die dürfen nicht beide auf den gleichen Ports lauschen.
Ohh, guter Hinweis
vielen Dank
Support us
430
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge