SONOFF NSPanel mit Lovelace UI

Armilar

So wie ich das sehe, hast du zwar die NSPanel_Service zu einer Subpage gemacht, aber nicht in die subPages verschoben...

Passe das mal wie im nachfolgenden Beispiel an:

    pages: [
            Alarm_Seite ,
    ],
    subPages: [
            NSPanel_Service         //Auto-Alias Service Page    
                NSPanel_Infos,                          //Auto-Alias Service Page
                    NSPanel_Wifi_Info_1,                //Auto-Alias Service Page
                    NSPanel_Wifi_Info_2,                //Auto-Alias Service Page
                    NSPanel_Sensoren,                   //Auto-Alias Service Page
                    NSPanel_Hardware,                   //Auto-Alias Service Page
                NSPanel_Einstellungen,                  //Auto-Alias Service Page
                    NSPanel_Screensaver,                //Auto-Alias Service Page
                        NSPanel_ScreensaverDimmode,     //Auto-Alias Service Page
                        NSPanel_ScreensaverBrightness,  //Auto-Alias Service Page
                        NSPanel_ScreensaverLayout,      //Auto-Alias Service Page
                        NSPanel_ScreensaverWeather,     //Auto-Alias Service Page
                        NSPanel_ScreensaverDateformat,  //Auto-Alias Service Page
                        NSPanel_ScreensaverIndicators,  //Auto-Alias Service Page
                    NSPanel_Relays,                     //Auto-Alias Service Page
                    NSPanel_Script,                     //Auto-Alias Service Page
                NSPanel_Firmware,                       //Auto-Alias Service Page
                    NSPanel_FirmwareTasmota,            //Auto-Alias Service Page
                    NSPanel_FirmwareBerry,              //Auto-Alias Service Page
                    NSPanel_FirmwareNextion,            //Auto-Alias Service Page

    ],

Armilar

@venice

extra einen Hinweis das man was beachten soll beim update von dem Adapter v6 auf v7

Ähem ja, System aktuell halten - Du lässt soeben dein System sterben, da du es nicht aktuell hältst...

Die Kombination: TFT 49 / v3.9.0 / BerryDriver 8 / Tasmota 12.3.1 ist nicht das Problem. Habe zu Testzwecken (Abwärtskompatibilität) auch noch so ein altes Script mit neuen Adapter-Versionen in einem Top-Aktuellen System am laufen...

Ich denke eher da muss noch etwas mehr geupdatet werden:

Welches Betriebssystem?

Führe in der Linux-Konsole mal

iob diag

aus... und sende mal den kompletten Output in Code Tags:

Welche Fehler bringt der JS-Adapter beim Start?

JackONell

@armilar
@TT-Tom

hier nochmal die entsprechenden Zeilen, da es leider immer noch nicht funktioniert . Übersehe ich irgendetwas oder mach etwas falsch ?

let Alarm_Seite = <PageUnlock>
{
    'type': 'cardUnlock',
    'heading': 'Alarmanlage',
    'useColor': true,
    'items': [<PageItem>{ id: 'alias.0.Unlock', targetPage: 'NSPanel_Service' }]
};

let NSPanel_Service = <PageEntities>
{
    'type': 'cardEntities',
    'heading': 'NSPanel Service',
    'useColor': true,
    'subPage': true,            
    'items': [
        <PageItem>{ navigate: true, id: 'NSPanel_Infos', icon: 'information-outline', offColor: Menu, onColor: Menu, name: 'Infos', buttonText: 'mehr...'},
        <PageItem>{ navigate: true, id: 'NSPanel_Einstellungen', icon: 'monitor-edit', offColor: Menu, onColor: Menu, name: 'Einstellungen', buttonText: 'mehr...'},
        <PageItem>{ navigate: true, id: 'NSPanel_Firmware', icon: 'update', offColor: Menu, onColor: Menu, name: 'Firmware', buttonText: 'mehr...'},
        <PageItem>{ id: AliasPath + 'Config.rebootNSPanel', name: 'Reboot NSPanel' ,icon: 'refresh', offColor: MSRed, onColor: MSGreen, buttonText: 'Start'},
    ]

};

pages: [

            FensterTuerenStatus_Seite,          
            FensterTuerenEG_Seite,         
            FensterTuerenOG_Seite,         
            Alarm_Seite,                 
            //NSPanel_Service,         	
            
    ],
    subPages: [
                
                NSPanel_Service,                          //Auto-Alias Service Page
                    NSPanel_Infos,                      //Auto-Alias Service Page
                    NSPanel_Wifi_Info_1,                //Auto-Alias Service Page
                    NSPanel_Wifi_Info_2,                //Auto-Alias Service Page
                    NSPanel_Sensoren,                   //Auto-Alias Service Page
                    NSPanel_Hardware,                   //Auto-Alias Service Page
                NSPanel_Einstellungen,                  //Auto-Alias Service Page
                    NSPanel_Screensaver,                //Auto-Alias Service Page
                        NSPanel_ScreensaverDimmode,     //Auto-Alias Service Page
                        NSPanel_ScreensaverBrightness,  //Auto-Alias Service Page
                        NSPanel_ScreensaverLayout,      //Auto-Alias Service Page
                        NSPanel_ScreensaverWeather,     //Auto-Alias Service Page
                        NSPanel_ScreensaverDateformat,  //Auto-Alias Service Page
                        NSPanel_ScreensaverIndicators,  //Auto-Alias Service Page
                    NSPanel_Relays,                     //Auto-Alias Service Page
                    NSPanel_Script,                     //Auto-Alias Service Page
                NSPanel_Firmware,                       //Auto-Alias Service Page
                    NSPanel_FirmwareTasmota,            //Auto-Alias Service Page
                    NSPanel_FirmwareBerry,              //Auto-Alias Service Page
                    NSPanel_FirmwareNextion,            //Auto-Alias Service Page
    ],

Danke für eure Hilfe

Venice

@Armilar

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberryiob
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model		: Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 10:42:02 up 4 min,  2 users,  load average: 0.79, 1.04, 0.54
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-11-09 10:42:03 CET
           Universal time: Thu 2023-11-09 09:42:03 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: 	false
Desktop: 	
Terminal: 	tty
Boot Target: 	multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.4G        2.1G        0.0K        284M        2.3G
Swap:            99M          0B         99M
Total:          3.9G        1.4G        2.2G

         3794 M total memory
         1371 M used memory
         1411 M active memory
          136 M inactive memory
         2137 M free memory
           37 M buffer memory
          247 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  4.7G   52G   9% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  828K  759M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   32M  221M  13% /boot
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Nov  9 10:37:17 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:47:8B:F8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=486c7c0d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Nov  9 10:37:18 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Thu Nov  9 10:37:18 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Nov  9 10:37:20 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
1.2G	/var/
652M	/var/log
649M	/var/log/journal/15a72ee8ba3743f4b7b3943522a0f949
649M	/var/log/journal
296M	/var/cache

Archived and active journals take up 648.1M in the file system.

/opt/iobroker/backups:
37M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
315M	/opt/iobroker/iobroker-data/
212M	/opt/iobroker/iobroker-data/files
81M	/opt/iobroker/iobroker-data/backup-objects
52M	/opt/iobroker/iobroker-data/files/javascript.admin
45M	/opt/iobroker/iobroker-data/files/devices.admin/static

The five largest files in iobroker-data are:
35M	/opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
21M	/opt/iobroker/iobroker-data/objects.jsonl
21M	/opt/iobroker/iobroker-data/files/web.admin/static/js/main.eafddf6f.js.map
19M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
8.9M	/opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2654154-if00

*** NodeJS-Installation ***

/home/iobroker/.diag.sh: line 277: nodejs: command not found
 	
/usr/bin/node 		v16.20.2
/usr/bin/npm 		8.19.4
/usr/bin/npx 		8.19.4
/usr/bin/corepack 	0.17.0
/home/iobroker/.diag.sh: line 288: nodejs: command not found
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 16.20.2-deb-1nodesource1
  Candidate: 16.20.2-deb-1nodesource1
  Version table:
 *** 16.20.2-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.12
admin: 		6.12.0
javascript: 	7.1.4

Adapters from github: 	1

Adapter State
+ system.adapter.accuweather.0            : accuweather           : raspberryiob                             -  enabled
+ system.adapter.admin.0                  : admin                 : raspberryiob                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberryiob                             -  enabled
  system.adapter.cloud.0                  : cloud                 : raspberryiob                             - disabled
  system.adapter.device-reminder.0        : device-reminder       : raspberryiob                             - disabled
  system.adapter.devices.0                : devices               : raspberryiob                             -  enabled
+ system.adapter.discovery.0              : discovery             : raspberryiob                             -  enabled
+ system.adapter.heatingcontrol.0         : heatingcontrol        : raspberryiob                             -  enabled
+ system.adapter.history.0                : history               : raspberryiob                             -  enabled
+ system.adapter.hue.0                    : hue                   : raspberryiob                             -  enabled, port: 443
+ system.adapter.info.0                   : info                  : raspberryiob                             -  enabled
  system.adapter.iot.0                    : iot                   : raspberryiob                             - disabled
+ system.adapter.javascript.0             : javascript            : raspberryiob                             -  enabled
+ system.adapter.lovelace.0               : lovelace              : raspberryiob                             -  enabled, port: 8091, bind: 192.168.3.79, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberryiob                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.scenes.0                 : scenes                : raspberryiob                             -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberryiob                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberryiob                             -  enabled
+ system.adapter.tado.0                   : tado                  : raspberryiob                             -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : raspberryiob                             -  enabled
+ system.adapter.web.0                    : web                   : raspberryiob                             -  enabled, port: 8083, bind: 0.0.0.0, run as: admin
  system.adapter.wled.0                   : wled                  : raspberryiob                             - disabled
+ system.adapter.yahka.0                  : yahka                 : raspberryiob                             -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberryiob                             -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2654154-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberryiob                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : raspberryiob                             -  enabled, port: 443
+ system.adapter.lovelace.0               : lovelace              : raspberryiob                             -  enabled, port: 8091, bind: 192.168.3.79, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberryiob                             -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberryiob                             -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberryiob                             -  enabled, port: 8083, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberryiob                             -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2654154-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.3.1    , installed 1.3.1
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "device-reminder": 3.0.0  , installed 1.2.9  [Updatable]
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "heatingcontrol": 2.11.1  , installed 2.11.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hue"          : 3.10.1   , installed 3.10.1
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lovelace"     : 3.0.1    , installed 3.0.1
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "mqtt-client"  : 1.6.5    , installed 1.6.5
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "tado"         : 0.4.11   , installed 0.4.11
Adapter    "vw-connect"   : 0.0.67   , installed 0.0.67
Adapter    "web"          : 6.1.4    , installed 6.1.4
Adapter    "wled"         : 0.7.1    , installed 0.7.1
Adapter    "ws"           : 2.5.5    , installed 2.5.5
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects: 	6320
States: 	5908

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 http://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14515      523/sshd: /usr/sbin 
tcp        0      0 192.168.3.79:8091       0.0.0.0:*               LISTEN      1001       13043      868/io.lovelace.0   
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       14866      816/io.mqtt.0       
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       14867      816/io.mqtt.0       
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       12055      493/iobroker.js-con 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       14554      493/iobroker.js-con 
tcp        0      0 127.0.0.1:36925         0.0.0.0:*               LISTEN      1001       16468      909/io.yahka.0      
tcp6       0      0 :::35491                :::*                    LISTEN      1001       13133      909/io.yahka.0      
tcp6       0      0 :::22                   :::*                    LISTEN      0          14517      523/sshd: /usr/sbin 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       1907       634/io.admin.0      
tcp6       0      0 :::8083                 :::*                    LISTEN      1001       18586      1057/io.web.0       
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          1807       694/dhcpcd          
udp        0      0 0.0.0.0:54238           0.0.0.0:*                           108        12000      392/avahi-daemon: r 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        11998      392/avahi-daemon: r 
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       12971      771/io.shelly.0     
udp6       0      0 :::52311                :::*                                108        12001      392/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                108        11999      392/avahi-daemon: r 

*** Log File - Last 25 Lines ***

Armilar

@jackonell

Ist bei mir so:

let Unlock_Service = <PageUnlock>
{
    'type': 'cardUnlock',
    'heading': 'Service Pages',
    'useColor': true,
    'items': [<PageItem>{ id: 'alias.0.Unlock', targetPage: 'NSPanel_Service' }]
};

//Level_0 
let NSPanel_Service = <PageEntities>
{
    'type': 'cardEntities',
    'heading': 'NSPanel Service',
    'subPage': true,
    'parent': Unlock_Service,
    'home': 'Unlock_Service',   
    'useColor': true,
    'items': [
        <PageItem>{ navigate: true, id: 'NSPanel_Infos', icon: 'information-outline', offColor: Menu, onColor: Menu, name: 'Infos', buttonText: 'mehr...'},
        <PageItem>{ navigate: true, id: 'NSPanel_Einstellungen', icon: 'monitor-edit', offColor: Menu, onColor: Menu, name: 'Einstellungen', buttonText: 'mehr...'},
        <PageItem>{ navigate: true, id: 'NSPanel_Firmware', icon: 'update', offColor: Menu, onColor: Menu, name: 'Firmware', buttonText: 'mehr...'},
        <PageItem>{ id: AliasPath + 'Config.rebootNSPanel', name: 'Reboot NSPanel' ,icon: 'refresh', offColor: MSRed, onColor: MSGreen, buttonText: 'Start'},
    ]
};

    pages: [
            // ... Diverse Seiten
            Unlock_Service,


            //NSPanel_Service         //Auto-Alias Service Page
    ],
    subPages: [

                NSPanel_Service,         //Auto-Alias Service Page
                NSPanel_Infos,                          //Auto-Alias Service Page
                    NSPanel_Wifi_Info_1,                //Auto-Alias Service Page
                    NSPanel_Wifi_Info_2,                //Auto-Alias Service Page
                    NSPanel_Sensoren,                   //Auto-Alias Service Page
                    NSPanel_Hardware,                   //Auto-Alias Service Page
                NSPanel_Einstellungen,                  //Auto-Alias Service Page
                    NSPanel_Screensaver,                //Auto-Alias Service Page
                        NSPanel_ScreensaverDimmode,     //Auto-Alias Service Page
                        NSPanel_ScreensaverBrightness,  //Auto-Alias Service Page
                        NSPanel_ScreensaverLayout,      //Auto-Alias Service Page
                        NSPanel_ScreensaverWeather,     //Auto-Alias Service Page
                        NSPanel_ScreensaverDateformat,  //Auto-Alias Service Page
                        NSPanel_ScreensaverIndicators,  //Auto-Alias Service Page
                    NSPanel_Relays,                     //Auto-Alias Service Page
                    NSPanel_Script,                     //Auto-Alias Service Page
                NSPanel_Firmware,                       //Auto-Alias Service Page
                    NSPanel_FirmwareTasmota,            //Auto-Alias Service Page
                    NSPanel_FirmwareBerry,              //Auto-Alias Service Page
                    NSPanel_FirmwareNextion,            //Auto-Alias Service Page

49265991-5119-4ed8-87df-9342d4a8013d-Nextion_Editor_gF6wPz19BC.gif

Thomas Braun

@venice sagte in SONOFF NSPanel mit Lovelace UI:

*** nodejs is NOT correctly installed ***

iob stop
iob fix
iob nodejs-update

Venice

@armilar Ist mein System nicht aktuell ? Ich mache eigentlich immer alle updates mit . Was meinst du mit Fehler JS Adapter? Wenn ich das Script starte?
Vielen Dank schonmal für die tolle Unterstützung.

Venice

@thomas-braun
Dass wird jetzt angezeigt.....
Nothing to do - Your installation is using the correct paths.

You are running nodejs v16.20.2. Do you want to install recommended version 18.18.2?

Vielen Dank

Armilar

@venice

Sieht bis auf das bullseye und das NodeJS eigentlich ganz ordentlich aus... Drehe mal das NodeJS auf 18

sudo apt update
sudo apt full-upgrade
sudo reboot

iob stop
iob fix
iob iob nodejs-update 18
iob start

Wenn es dann läuft, solltest du dir im Forum eine Anleitung suchen, wie du von bullseye auf bookworm kommst.

Thomas Braun

@venice sagte in SONOFF NSPanel mit Lovelace UI:

You are running nodejs v16.20.2. Do you want to install recommended version 18.18.2?

Ja, das willst du.

Matthias 0

Hallo zusammen,
seit dem Update erhalte ich immer wiederkehrende Warnmeldungen im Log.
Kann mir jemend sagen, wie ich diese beseitigen kann?

javascript.0 (911) script.js.common.NS_Panels.Panel_Bad: error at function HandleScreensaverUpdate: parseFormat is not a function

Vielen Dank!

Armilar

@Venice

bei @Thomas-Braun hast du jetzt die perfekte Systemhilfe...

Armilar

@matthias-0

Die Frage beantworte ich etwa alle 12 Stunden:

https://forum.iobroker.net/post/1077067

Matthias 0

@armilar
Vielen Dank für die erneute Antwort.
Leider ergab die suche nach der Fehlermeldung kein Ergebnis.

Viele Grüße

Venice

@thomas-braun Ja das habe ich mir schon gedacht und auch so durchgezogen. Jetzt habe ich 18.18 drauf. Weißt du wie ich jetzt von Bullseye auf Bookworm komme?

Ist das so Richtig?

sudo apt update && sudo apt full-upgrade -y

reboot

dann

apt-mark showhold
apt-mark unhold [Paketname]

jetzt umstellen auf Bookworm

sudo sed -i'.bak' 's/bullseye/bookworm/g' /etc/apt/sources.list

sudo apt update
sudo apt dist-upgrade

reboot

cat /etc/debian_version

Armilar

@matthias-0

Aber gerne doch

Wird sicherlich noch öfter kommen

Thomas Braun

@venice

https://forum.iobroker.net/topic/65655/upgrade-von-debian-11-bullseye-auf-12-bookworm

Venice

@armilar Vielen Lieben Dank.
Das ist aktuell mein Fehler im log für das Script. Hast du da eine Idee?

script.js.NS_Panels.Panel_Erdgeschoss: TypeScript compilation failed: if ((pageItem.useColor || useColors) && ((typeof (value) === 'boolean' && value) || value > (pageItem.minValueBrightness !== undefined ? pageItem.minValueBrightness : 0))) { ^ERROR: Operator '>' cannot be applied to types 'number | boolean' and 'number'.

Armilar

@venice

Ja, zwei Möglichkeiten, da TypeScript restriktiver geworden ist:

Variante 1) TS-Script auf aktuelle Version updaten

Variante 2) 3.9.0 behalten und folgende Zeile suchen:

        if ((pageItem.useColor || useColors) && ((typeof (value) === 'boolean' && value) || value > (pageItem.minValueBrightness !== undefined ? pageItem.minValueBrightness : 0))) {
            return rgb_dec565(pageItem.onColor !== undefined ? pageItem.onColor : config.defaultOnColor);
        }

dann mit:

        if ((pageItem.useColor || useColors) && (typeof (value) === 'boolean' && value) || ((typeof (value) === 'number') && (value > (pageItem.minValueBrightness !== undefined ? pageItem.minValueBrightness : 0)))) {
            return rgb_dec565(pageItem.onColor !== undefined ? pageItem.onColor : config.defaultOnColor);
        }

ersetzen!

ist ein Fix vom 12.08.2023

https://github.com/joBr99/nspanel-lovelace-ui/commit/80a881c980cf2bf4421a8e8cab9d4435e354dccc

TT-Tom

@jackonell

Hast du den Alias richtig angelegt, laut Wiki?
Zeige mal bitte die Objekteinstellungen.

NEWS

SONOFF NSPanel mit Lovelace UI

Support us

689

32.4k

81.4k

1.3m