NEWS
Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0
-
Und im LogFile steht was genau, wenn der Adapter (neu)gestartet wird?
iob logs --watch | uniqin einem Terminal anschauen.
@thomas-braun
Ich weiß leider nicht, wie ich das Logfile hier richtig darstelle, aber das habe ich im iOBroker log gefunden:zigbee.0
2023-09-17 13:44:47.379 error Error herdsman startzigbee.0
2023-09-17 13:44:47.378 error Failed to start Zigbeezigbee.0
2023-09-17 13:44:47.378 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"zigbee.0
2023-09-17 13:44:47.265 info Installed Version: iobroker.zigbee@1.8.23zigbee.0
2023-09-17 13:44:47.241 info Starting Zigbee npm ...zigbee.0
2023-09-17 13:44:47.240 info Try to reconnect. 1 attempts leftzigbee.0
2023-09-17 13:44:37.238 error Error herdsman startzigbee.0
2023-09-17 13:44:37.238 error Failed to start Zigbeezigbee.0
2023-09-17 13:44:37.238 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"zigbee.0
2023-09-17 13:44:16.755 info Installed Version: iobroker.zigbee@1.8.23zigbee.0
2023-09-17 13:44:16.587 info Starting Zigbee npm ...zigbee.0
2023-09-17 13:44:16.586 info delete old Backup files. keep only last 10zigbee.0
2023-09-17 13:44:16.527 info starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12zigbee.0
2023-09-17 13:44:01.367 info debug devices set to []zigbee.0
2023-09-17 13:44:01.361 info terminatingzigbee.0
2023-09-17 13:44:01.336 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reasonzigbee.0
2023-09-17 13:44:01.335 info terminatingzigbee.0
2023-09-17 13:44:01.334 warn Failed to stop zigbee during startupzigbee.0
2023-09-17 13:44:01.303 info Zigbee: disabling joining new devices.zigbee.0
2023-09-17 13:44:00.858 info cleaned everything up...zigbee.0
2023-09-17 13:44:00.857 info Got terminate signal TERMINATE_YOURSELF -
@thomas-braun
Ich weiß leider nicht, wie ich das Logfile hier richtig darstelle, aber das habe ich im iOBroker log gefunden:zigbee.0
2023-09-17 13:44:47.379 error Error herdsman startzigbee.0
2023-09-17 13:44:47.378 error Failed to start Zigbeezigbee.0
2023-09-17 13:44:47.378 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"zigbee.0
2023-09-17 13:44:47.265 info Installed Version: iobroker.zigbee@1.8.23zigbee.0
2023-09-17 13:44:47.241 info Starting Zigbee npm ...zigbee.0
2023-09-17 13:44:47.240 info Try to reconnect. 1 attempts leftzigbee.0
2023-09-17 13:44:37.238 error Error herdsman startzigbee.0
2023-09-17 13:44:37.238 error Failed to start Zigbeezigbee.0
2023-09-17 13:44:37.238 error Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"zigbee.0
2023-09-17 13:44:16.755 info Installed Version: iobroker.zigbee@1.8.23zigbee.0
2023-09-17 13:44:16.587 info Starting Zigbee npm ...zigbee.0
2023-09-17 13:44:16.586 info delete old Backup files. keep only last 10zigbee.0
2023-09-17 13:44:16.527 info starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12zigbee.0
2023-09-17 13:44:01.367 info debug devices set to []zigbee.0
2023-09-17 13:44:01.361 info terminatingzigbee.0
2023-09-17 13:44:01.336 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reasonzigbee.0
2023-09-17 13:44:01.335 info terminatingzigbee.0
2023-09-17 13:44:01.334 warn Failed to stop zigbee during startupzigbee.0
2023-09-17 13:44:01.303 info Zigbee: disabling joining new devices.zigbee.0
2023-09-17 13:44:00.858 info cleaned everything up...zigbee.0
2023-09-17 13:44:00.857 info Got terminate signal TERMINATE_YOURSELF -
@thomas-braun
DANKE !!!!peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.379errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorStarting zigbee-herdsman probl em : "Error while opening serialport 'Error: Error Resource temporarily unavaila ble Cannot lock port'" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.265infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.241infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.240infoTry to reconnect. 1 attempts le ft bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorStarting zigbee-herdsman probl em : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.755infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.587infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.586infodelete old Backup files. keep o nly last 10 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.527infostarting. Version 1.8.23 in /op t/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.367infodebug devices set to [] bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.361infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.336infoTerminated (ADAPTER_REQUESTED_T ERMINATION): Without reason bash: Syntaxfehler beim unerwarteten Symbol »(« peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.335infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.334warnFailed to stop zigbee during st artup bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.303infoZigbee: disabling joining new d evices. bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.858infocleaned everything up... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.857infoGot terminate signal TERMINATE_YOURSELF -
@thomas-braun
DANKE !!!!peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.379errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorStarting zigbee-herdsman probl em : "Error while opening serialport 'Error: Error Resource temporarily unavaila ble Cannot lock port'" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.265infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.241infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.240infoTry to reconnect. 1 attempts le ft bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorStarting zigbee-herdsman probl em : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.755infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.587infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.586infodelete old Backup files. keep o nly last 10 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.527infostarting. Version 1.8.23 in /op t/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.367infodebug devices set to [] bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.361infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.336infoTerminated (ADAPTER_REQUESTED_T ERMINATION): Without reason bash: Syntaxfehler beim unerwarteten Symbol »(« peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.335infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.334warnFailed to stop zigbee during st artup bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.303infoZigbee: disabling joining new d evices. bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.858infocleaned everything up... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.857infoGot terminate signal TERMINATE_YOURSELFDu sollst nicht das LogFile in das Terminal klatschen, du sollst aus dem Terminal das LogFile in Echtzeit auslesen. Geht mit obigem Befehl.
-
Du sollst nicht das LogFile in das Terminal klatschen, du sollst aus dem Terminal das LogFile in Echtzeit auslesen. Geht mit obigem Befehl.
-
@thomas-braun Ich habe jetzt versucht, aus den Fehlermeldungen irgendwas rauszulesen. ich denke, dass vielleicht der Com Port nicht richtig eingestellt ist. Wie finde ich den richtigen heraus?
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Ich habe jetzt versucht, aus den Fehlermeldungen irgendwas rauszulesen.
Könntest du die Meldungen zeigen? Dann kann man mitraten.
-
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Ich habe jetzt versucht, aus den Fehlermeldungen irgendwas rauszulesen.
Könntest du die Meldungen zeigen? Dann kann man mitraten.
2023-09-17 14:09:33.772 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:33.776 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:33.777 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:33.786 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:33.356 - info: zigbee.0 (8209) starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 2023-09-17 14:09:33.441 - info: zigbee.0 (8209) delete old Backup files. keep only last 10 2023-09-17 14:09:33.442 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:33.772 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:33.776 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:33.777 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:33.786 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:43.780 - info: zigbee.0 (8209) Try to reconnect. 1 attempts left 2023-09-17 14:09:43.781 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:43.807 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:43.808 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:43.811 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:43.817 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:43.780 - info: zigbee.0 (8209) Try to reconnect. 1 attempts left 2023-09-17 14:09:43.781 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:43.807 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:43.808 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:43.811 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:43.817 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:10:26.405 - info: ham.0 (2102) stateChange ham.0.Pool.Temperature-Sensor.Current-Temperature {"val":22.7,"ack":true,"ts":1694952626403,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694952626403} -
2023-09-17 14:09:33.772 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:33.776 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:33.777 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:33.786 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:33.356 - info: zigbee.0 (8209) starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 2023-09-17 14:09:33.441 - info: zigbee.0 (8209) delete old Backup files. keep only last 10 2023-09-17 14:09:33.442 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:33.772 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:33.776 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:33.777 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:33.786 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:43.780 - info: zigbee.0 (8209) Try to reconnect. 1 attempts left 2023-09-17 14:09:43.781 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:43.807 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:43.808 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:43.811 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:43.817 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:09:43.780 - info: zigbee.0 (8209) Try to reconnect. 1 attempts left 2023-09-17 14:09:43.781 - info: zigbee.0 (8209) Starting Zigbee npm ... 2023-09-17 14:09:43.807 - error: zigbee.0 (8209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/ttyS0'" 2023-09-17 14:09:43.808 - error: zigbee.0 (8209) Failed to start Zigbee 2023-09-17 14:09:43.811 - error: zigbee.0 (8209) Error herdsman start 2023-09-17 14:09:43.817 - info: zigbee.0 (8209) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:10:26.405 - info: ham.0 (2102) stateChange ham.0.Pool.Temperature-Sensor.Current-Temperature {"val":22.7,"ack":true,"ts":1694952626403,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694952626403}@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
/dev/serial/ttyS0
Den Pfad gibt es nicht und deswegen kann das Gerät auch nicht gefunden werden.
find /dev/serial/by-id/ -maxdepth 1 -mindepth 1spuckt dir valide Pfade aus. Den zum Stick trägst du dann im Adapter unter com-Ports ein.
-
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
/dev/serial/ttyS0
Den Pfad gibt es nicht und deswegen kann das Gerät auch nicht gefunden werden.
find /dev/serial/by-id/ -maxdepth 1 -mindepth 1spuckt dir valide Pfade aus. Den zum Stick trägst du dann im Adapter unter com-Ports ein.
peter@q4os-desktop:~$ find /dev/serial/by-id/ -maxdepth 1 -mindepth 1 /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 peter@q4os-desktop:~$Die Zeile 2 habe ich kopiert und als com port eingetragen. Geht leider auch nicht.
-
peter@q4os-desktop:~$ find /dev/serial/by-id/ -maxdepth 1 -mindepth 1 /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 peter@q4os-desktop:~$Die Zeile 2 habe ich kopiert und als com port eingetragen. Geht leider auch nicht.
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Geht leider auch nicht.
Geht nicht ist keine Fehlermeldung.
Adapter Neustart schaut nun wie im LogFile aus? -
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Geht leider auch nicht.
Geht nicht ist keine Fehlermeldung.
Adapter Neustart schaut nun wie im LogFile aus?das sind die Meldungen nach dem Neustart des Adapters:
2023-09-17 14:28:30.974 - info: host.q4os-desktop stopInstance system.adapter.z igbee.0 (force=false, process=true) 2023-09-17 14:28:31.003 - info: zigbee.0 (8560) Got terminate signal TERMINATE_ YOURSELF 2023-09-17 14:28:31.234 - info: host.q4os-desktop stopInstance system.adapter.z igbee.0 send kill signal 2023-09-17 14:28:31.007 - info: zigbee.0 (8560) cleaned everything up... 2023-09-17 14:28:31.411 - info: zigbee.0 (8560) Zigbee: disabling joining new d evices. 2023-09-17 14:28:31.437 - warn: zigbee.0 (8560) Failed to stop zigbee during st artup 2023-09-17 14:28:31.438 - info: zigbee.0 (8560) terminating 2023-09-17 14:28:31.439 - info: zigbee.0 (8560) Terminated (ADAPTER_REQUESTED_T ERMINATION): Without reason 2023-09-17 14:28:31.508 - info: zigbee.0 (8560) terminating 2023-09-17 14:28:31.551 - info: zigbee.0 (8560) debug devices set to [] 2023-09-17 14:28:32.037 - info: host.q4os-desktop instance system.adapter.zigbe e.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-17 14:28:32.536 - info: admin.0 (1342) <== Disconnect system.user.admin from ::ffff:192.168.2.222 2023-09-17 14:28:30.974 - info: host.q4os-desktop stopInstance system.adapter.z igbee.0 (force=false, process=true) 2023-09-17 14:28:31.003 - info: zigbee.0 (8560) Got terminate signal TERMINATE_ YOURSELF 2023-09-17 14:28:31.234 - info: host.q4os-desktop stopInstance system.adapter.z igbee.0 send kill signal 2023-09-17 14:28:31.007 - info: zigbee.0 (8560) cleaned everything up... 2023-09-17 14:28:31.411 - info: zigbee.0 (8560) Zigbee: disabling joining new d evices. 2023-09-17 14:28:31.437 - warn: zigbee.0 (8560) Failed to stop zigbee during st artup 2023-09-17 14:28:31.438 - info: zigbee.0 (8560) terminating 2023-09-17 14:28:31.439 - info: zigbee.0 (8560) Terminated (ADAPTER_REQUESTED_T ERMINATION): Without reason 2023-09-17 14:28:31.508 - info: zigbee.0 (8560) terminating 2023-09-17 14:28:31.551 - info: zigbee.0 (8560) debug devices set to [] 2023-09-17 14:28:32.037 - info: host.q4os-desktop instance system.adapter.zigbe e.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-09-17 14:28:32.536 - info: admin.0 (1342) <== Disconnect system.user.admin from ::ffff:192.168.2.222 2023-09-17 14:28:34.346 - info: host.q4os-desktop instance system.adapter.zigbe e.0 started with pid 8926 2023-09-17 14:28:37.102 - info: zigbee.0 (8926) starting. Version 1.8.23 in /op t/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 2023-09-17 14:28:37.152 - info: zigbee.0 (8926) delete old Backup files. keep o nly last 10 2023-09-17 14:28:37.153 - info: zigbee.0 (8926) Starting Zigbee npm ... 2023-09-17 14:28:37.285 - info: zigbee.0 (8926) Installed Version: iobroker.zig bee@1.8.23 2023-09-17 14:28:37.102 - info: zigbee.0 (8926) starting. Version 1.8.23 in /op t/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 2023-09-17 14:28:37.152 - info: zigbee.0 (8926) delete old Backup files. keep o nly last 10 2023-09-17 14:28:37.153 - info: zigbee.0 (8926) Starting Zigbee npm ... 2023-09-17 14:28:37.285 - info: zigbee.0 (8926) Installed Version: iobroker.zig bee@1.8.23 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Failed to start Zigbee 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Error herdsman start 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Failed to start Zigbee 2023-09-17 14:28:57.509 - error: zigbee.0 (8926) Error herdsman start 2023-09-17 14:29:07.512 - info: zigbee.0 (8926) Try to reconnect. 1 attempts left 2023-09-17 14:29:07.514 - info: zigbee.0 (8926) Starting Zigbee npm ... 2023-09-17 14:29:07.539 - info: zigbee.0 (8926) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:29:07.662 - error: zigbee.0 (8926) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-09-17 14:29:07.663 - error: zigbee.0 (8926) Failed to start Zigbee 2023-09-17 14:29:07.663 - error: zigbee.0 (8926) Error herdsman start 2023-09-17 14:29:07.512 - info: zigbee.0 (8926) Try to reconnect. 1 attempts left 2023-09-17 14:29:07.514 - info: zigbee.0 (8926) Starting Zigbee npm ... 2023-09-17 14:29:07.539 - info: zigbee.0 (8926) Installed Version: iobroker.zigbee@1.8.23 2023-09-17 14:29:07.662 - error: zigbee.0 (8926) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-09-17 14:29:07.663 - error: zigbee.0 (8926) Failed to start Zigbee 2023-09-17 14:29:07.663 - error: zigbee.0 (8926) Error herdsman start -
@thomas-braun
DANKE !!!!peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.379errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.378errorStarting zigbee-herdsman probl em : "Error while opening serialport 'Error: Error Resource temporarily unavaila ble Cannot lock port'" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.265infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.241infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:47.240infoTry to reconnect. 1 attempts le ft bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorError herdsman start bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorFailed to start Zigbee bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:37.238errorStarting zigbee-herdsman probl em : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)" bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.755infoInstalled Version: iobroker.zig bee@1.8.23 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.587infoStarting Zigbee npm ... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.586infodelete old Backup files. keep o nly last 10 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:16.527infostarting. Version 1.8.23 in /op t/iobroker/node_modules/iobroker.zigbee, node: v16.19.1, js-controller: 5.0.12 bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.367infodebug devices set to [] bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.361infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.336infoTerminated (ADAPTER_REQUESTED_T ERMINATION): Without reason bash: Syntaxfehler beim unerwarteten Symbol »(« peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.335infoterminating bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.334warnFailed to stop zigbee during st artup bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:01.303infoZigbee: disabling joining new d evices. bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.858infocleaned everything up... bash: 2023-09-17: Kommando nicht gefunden. peter@q4os-desktop:~$ peter@q4os-desktop:~$ zigbee.0 bash: zigbee.0: Kommando nicht gefunden. peter@q4os-desktop:~$ 2023-09-17 13:44:00.857infoGot terminate signal TERMINATE_YOURSELF@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
q4os
Zeige mal
iob diagaber die Full Version
-
Ich hoffe, das ist die full Version...
======== Start marking the full check here =========Skript v.2023-06-20
*** BASE SYSTEM ***
Static hostname: q4os-desktop
Icon name: computer-desktop
Chassis: desktop
Machine ID: 163dfadd781c44cd94d7a397cdd870ff
Boot ID: aec401992f534ee8ad15c09fdff5e2d4
Operating System: Debian GNU/Linux 11 (bullseye)
Kernel: Linux 5.10.0-21-amd64
Architecture: x86-64model name : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz
Docker : false
Virtualization : none
Kernel : x86_64
Userland : amd64Systemuptime and Load:
14:33:42 up 1:41, 1 user, load average: 1.26, 1.06, 1.22
CPU threads: 4*** Time and Time Zones ***
Local time: Sun 2023-09-17 14:33:42 CEST
Universal time: Sun 2023-09-17 12:33:42 UTC
RTC time: Sun 2023-09-17 12:33:42
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** User and Groups ***
peter
/home/peter
peter dialout cdrom floppy sudo audio dip video plugdev users netdev lpadmin bluetooth scanner iobroker*** X-Server-Setup ***
X-Server: true
Desktop: trinity
Terminal: x11
Boot Target: graphical.target*** MEMORY ***
total used free shared buff/cache available
Mem: 15G 4.3G 9.0G 289M 2.7G 11G
Swap: 9.2G 0B 9.2G
Total: 25G 4.3G 18G15893 M total memory 4286 M used memory 649 M active memory 5612 M inactive memory 8956 M free memory 181 M buffer memory 2468 M swap cache 9167 M total swap 0 M used swap 9167 M free swap*** FILESYSTEM ***
df: /run/user/1000/doc: Operation not permitted
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 2.8M 1.6G 1% /run
/dev/mapper/q4os--desktop--vg-root ext4 91G 25G 62G 29% /
tmpfs tmpfs 7.8G 56M 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
/dev/nvme0n1p1 ext2 470M 366M 80M 83% /boot
tmpfs tmpfs 1.6G 36K 1.6G 1% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Sun Sep 17 12:51:57 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sun Sep 17 12:51:57 2023] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[Sun Sep 17 12:51:58 2023] EXT4-fs (nvme0n1p1): mounting ext2 file system using the ext4 subsystem
[Sun Sep 17 12:51:58 2023] EXT4-fs (nvme0n1p1): mounted filesystem without journal. Opts: (null)Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mapper/q4os--desktop--vg-root ext4 rw,relatime,errors=remount-ro
|-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
`-/boot /dev/nvme0n1p1 ext2 rw,relatimeFiles in neuralgic directories:
/var:
6.3G /var/
4.2G /var/log/journal/163dfadd781c44cd94d7a397cdd870ff
4.2G /var/log/journal
4.2G /var/log
1.8G /var/libHint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.
Pass -q to turn off this notice.
Archived and active journals take up 160.0M in the file system./opt/iobroker/backups:
89M /opt/iobroker/backups//opt/iobroker/iobroker-data:
2.4G /opt/iobroker/iobroker-data/
2.0G /opt/iobroker/iobroker-data/history
202M /opt/iobroker/iobroker-data/files
167M /opt/iobroker/iobroker-data/backup-objects
52M /opt/iobroker/iobroker-data/files/javascript.adminThe five largest files in iobroker-data are:
35M /opt/iobroker/iobroker-data/states.jsonl
23M /opt/iobroker/iobroker-data/objects.jsonl
21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
16M /opt/iobroker/iobroker-data/objects.json.migrated*** NodeJS-Installation ***
/usr/bin/nodejs v16.19.1
/usr/bin/node v16.19.1
/usr/bin/npm 8.19.3
/usr/bin/npx 8.19.3nodejs:
Installed: 16.19.1-deb-1nodesource1
Candidate: 16.20.2-deb-1nodesource1
Version table:
16.20.2-deb-1nodesource1 500
500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages
*** 16.19.1-deb-1nodesource1 100
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
12.22.12~dfsg-1~deb11u3 500
500 http://ftp.at.debian.org/debian bullseye/main amd64 Packages
500 http://ftp.debian.org/debian bullseye/main amd64 PackagesTemp directories causing npm8 problem: 0
No problems detectednpm ERR! code ELSPROBLEMS
npm ERR! missing: homebridge-ewelink@^11.0.2, required by iobroker.ham@5.3.1npm ERR! A complete log of this run can be found in:
npm ERR! /home/peter/.npm/_logs/2023-09-17T12_33_51_450Z-debug-0.log
Errors in npm tree: 0*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlNo configuration change needed.
Multihost discovery server: disabled
Discovery authentication: enabled
Persistent activation: disabled
Objects: jsonl on 127.0.0.1
States: jsonl on 127.0.0.1Core adapters versions
js-controller: 5.0.12
admin: 6.8.0
javascript: 7.1.4Adapters from github: 0
Adapter State
-
system.adapter.admin.0 : admin : q4os-desktop - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.alexa2.0 : alexa2 : q4os-desktop - enabled
-
system.adapter.backitup.0 : backitup : q4os-desktop - enabled
-
system.adapter.bosch-ebike.0 : bosch-ebike : q4os-desktop - enabled
-
system.adapter.broadlink2.0 : broadlink2 : q4os-desktop - enabled
system.adapter.cloud.0 : cloud : q4os-desktop - disabled
system.adapter.daswetter.0 : daswetter : q4os-desktop - enabled -
system.adapter.device-reminder.0 : device-reminder : q4os-desktop - enabled
-
system.adapter.device-watcher.0 : device-watcher : q4os-desktop - enabled
-
system.adapter.discovery.0 : discovery : q4os-desktop - enabled
-
system.adapter.fb-checkpresence.0 : fb-checkpresence : q4os-desktop - enabled
system.adapter.flot.0 : flot : q4os-desktop - enabled -
system.adapter.fronius.0 : fronius : q4os-desktop - enabled
system.adapter.fuelpricemonitor.0 : fuelpricemonitor : q4os-desktop - enabled -
system.adapter.go-e.0 : go-e : q4os-desktop - enabled
-
system.adapter.ham.0 : ham : q4os-desktop - enabled
-
system.adapter.history.0 : history : q4os-desktop - enabled
-
system.adapter.hmip.0 : hmip : q4os-desktop - enabled
-
system.adapter.hs100.0 : hs100 : q4os-desktop - enabled
system.adapter.info.0 : info : q4os-desktop - enabled -
system.adapter.iot.0 : iot : q4os-desktop - enabled
-
system.adapter.javascript.0 : javascript : q4os-desktop - enabled
-
system.adapter.mercedesme.0 : mercedesme : q4os-desktop - enabled
-
system.adapter.mihome.0 : mihome : q4os-desktop - enabled, port: 9898, bind: 0.0.0.0
-
system.adapter.mqtt.0 : mqtt : q4os-desktop - enabled, port: 1886, bind: 0.0.0.0
system.adapter.netatmo-crawler.0 : netatmo-crawler : q4os-desktop - enabled -
system.adapter.netatmo.0 : netatmo : q4os-desktop - enabled
-
system.adapter.opendtu.0 : opendtu : q4os-desktop - enabled
-
system.adapter.shelly.0 : shelly : q4os-desktop - enabled, port: 1882, bind: 0.0.0.0
-
system.adapter.sonoff.0 : sonoff : q4os-desktop - enabled, port: 1884, bind: 0.0.0.0
-
system.adapter.sureflap.0 : sureflap : q4os-desktop - enabled
-
system.adapter.telegram.0 : telegram : q4os-desktop - enabled, port: 8443, bind: 0.0.0.0
-
system.adapter.tuya.0 : tuya : q4os-desktop - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : q4os-desktop - enabled -
system.adapter.vis-inventwo.0 : vis-inventwo : q4os-desktop - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : q4os-desktop - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : q4os-desktop - enabled
system.adapter.vis-weather.0 : vis-weather : q4os-desktop - enabled
system.adapter.vis.0 : vis : q4os-desktop - enabled -
system.adapter.web.0 : web : q4os-desktop - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
system.adapter.zigbee.0 : zigbee : q4os-desktop - enabled, port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : q4os-desktop - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.mihome.0 : mihome : q4os-desktop - enabled, port: 9898, bind: 0.0.0.0
- system.adapter.mqtt.0 : mqtt : q4os-desktop - enabled, port: 1886, bind: 0.0.0.0
- system.adapter.shelly.0 : shelly : q4os-desktop - enabled, port: 1882, bind: 0.0.0.0
- system.adapter.sonoff.0 : sonoff : q4os-desktop - enabled, port: 1884, bind: 0.0.0.0
- system.adapter.telegram.0 : telegram : q4os-desktop - enabled, port: 8443, bind: 0.0.0.0
- system.adapter.web.0 : web : q4os-desktop - enabled, port: 8082, bind: 0.0.0.0, run as: admin
- system.adapter.zigbee.0 : zigbee : q4os-desktop - enabled, port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.jsonActive repo(s): Stable (default)
Installed ioBroker-Instances
Used repository: Stable (default)
Adapter "admin" : 6.8.0 , installed 6.8.0
Adapter "alexa2" : 3.24.1 , installed 3.24.1
Adapter "backitup" : 2.6.23 , installed 2.6.23
Adapter "bosch-ebike" : 0.0.3 , installed 0.0.3
Adapter "broadlink2" : 2.1.5 , installed 2.1.5
Adapter "cloud" : 4.4.1 , installed 4.4.1
Adapter "daswetter" : 3.1.10 , installed 3.1.10
Adapter "device-reminder": 1.2.9 , installed 1.2.9
Adapter "device-watcher": 2.9.3 , installed 2.9.3
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "fronius" : 1.1.3 , installed 1.1.3
Adapter "fuelpricemonitor": 0.3.6 , installed 0.3.6
Adapter "go-e" : 1.0.27 , installed 1.0.27
Adapter "ham" : 5.3.1 , installed 5.3.1
Adapter "history" : 2.2.6 , installed 2.2.6
Adapter "hmip" : 1.20.0 , installed 1.20.0
Adapter "hs100" : 2.1.2 , installed 2.1.2
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "iot" : 1.14.5 , installed 1.14.5
Adapter "javascript" : 7.1.4 , installed 7.1.4
Controller "js-controller": 5.0.12 , installed 5.0.12
Adapter "mercedesme" : 0.1.1 , installed 0.1.1
Adapter "mihome" : 1.4.0 , installed 1.4.0
Adapter "mqtt" : 4.1.1 , installed 4.1.1
Adapter "netatmo" : 3.1.0 , installed 3.1.0
Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1
Adapter "opendtu" : 0.1.7 , installed 0.1.7
Adapter "shelly" : 6.4.1 , installed 6.4.1
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 6.5.5 , installed 6.5.5
Adapter "sonoff" : 2.5.3 , installed 2.5.3
Adapter "sureflap" : 1.2.0 , installed 1.2.0
Adapter "telegram" : 1.16.0 , installed 1.16.0
Adapter "tuya" : 3.14.2 , installed 3.14.2
Adapter "vis" : 1.4.16 , installed 1.4.16
Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0
Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "vis-weather" : 2.5.6 , installed 2.5.6
Adapter "web" : 6.1.2 , installed 6.1.2
Adapter "ws" : 2.5.5 , installed 2.5.5
Adapter "zigbee" : 1.8.23 , installed 1.8.23Objects and States
Please stand by - This may take a while
Objects: 27363
States: 20597*** OS-Repositories and Updates ***
E: Failed to fetch http://ppa.launchpad.net/morphis/anbox-support/ubuntu/dists/jammy/InRelease 403 Forbidden [IP: 185.125.190.52 80]
E: The repository 'http://ppa.launchpad.net/morphis/anbox-support/ubuntu jammy InRelease' is not signed.
E: The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file.
Pending Updates: 203*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 19753 1264/exim4
tcp 0 0 127.0.0.1:1883 0.0.0.0:* LISTEN 114 19499 662/mosquitto
tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 22616 1601/io.sonoff.0
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15224 986/smbd
tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 24947 2158/io.mqtt.0
tcp 0 0 127.0.0.1:3551 0.0.0.0:* LISTEN 0 20164 931/apcupsd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 20811 633/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 20788 633/iobroker.js-con
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15225 986/smbd
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 9850 1/init
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 20497 632/cupsd
tcp6 0 0 ::1:25 :::* LISTEN 0 19754 1264/exim4
tcp6 0 0 ::1:1883 :::* LISTEN 114 19500 662/mosquitto
tcp6 0 0 :::445 :::* LISTEN 0 15222 986/smbd
tcp6 0 0 :::139 :::* LISTEN 0 15223 986/smbd
tcp6 0 0 :::111 :::* LISTEN 0 9854 1/init
tcp6 0 0 :::8081 :::* LISTEN 1001 20981 1342/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 56228 5884/io.web.0
tcp6 0 0 :::6547 :::* LISTEN 0 19234 668/java
tcp6 0 0 ::1:631 :::* LISTEN 0 20496 632/cupsd
udp 0 0 0.0.0.0:45081 0.0.0.0:* 106 18261 566/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 26664 2102/io.ham.0
udp 0 0 224.0.0.251:5353 0.0.0.0:* 1000 23241 1657/chrome
udp 0 0 0.0.0.0:5353 0.0.0.0:* 106 18259 566/avahi-daemon: r
udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 22575 1586/io.shelly.0
udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 21162 1616/io.tuya.0
udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 21163 1616/io.tuya.0
udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 25907 2417/io.broadlink2.
udp 0 0 0.0.0.0:56606 0.0.0.0:* 1001 27109 2417/io.broadlink2.
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 9851 1/init
udp 0 0 192.168.2.255:137 0.0.0.0:* 0 18964 895/nmbd
udp 0 0 192.168.2.222:137 0.0.0.0:* 0 18963 895/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 18950 895/nmbd
udp 0 0 192.168.2.255:138 0.0.0.0:* 0 18966 895/nmbd
udp 0 0 192.168.2.222:138 0.0.0.0:* 0 18965 895/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 18951 895/nmbd
udp 0 0 0.0.0.0:631 0.0.0.0:* 0 20516 743/cups-browsed
udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 23354 2147/io.mihome.0
udp 0 0 0.0.0.0:43843 0.0.0.0:* 1001 25293 2417/io.broadlink2.
udp6 0 0 :::5353 :::* 106 18260 566/avahi-daemon: r
udp6 0 0 :::46479 :::* 0 19222 668/java
udp6 0 0 :::111 :::* 0 9857 1/init
udp6 0 0 :::3052 :::* 0 20869 668/java
udp6 0 0 :::60662 :::* 106 18262 566/avahi-daemon: r*** Log File - Last 25 Lines ***
2023-09-17 14:30:00.036 - info: host.q4os-desktop instance system.adapter.netatmo-crawler.0 started with pid 8970
2023-09-17 14:30:01.380 - info: netatmo-crawler.0 (8970) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.1, js-controller: 5.0.12
2023-09-17 14:30:01.456 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:53:39:f8
2023-09-17 14:30:01.804 - warn: netatmo-crawler.0 (8970) Could not work with station 1 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:01.807 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:7f:96:be
2023-09-17 14:30:02.094 - warn: netatmo-crawler.0 (8970) Could not work with station 2 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:02.095 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:27:ac:9a
2023-09-17 14:30:02.394 - warn: netatmo-crawler.0 (8970) Could not work with station 3 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:02.397 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:96:a4:36
2023-09-17 14:30:03.866 - info: netatmo-crawler.0 (8970) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-09-17 14:30:04.399 - info: host.q4os-desktop instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-17 14:33:11.113 - info: ham.0 (2102) stateChange ham.0.Messsteckdose.Messsteckdose-History.S2R1 {"val":"uLYLAAAAAADPcqsqAQ4BAgXADwAAAAAAAAAAAQE=","ack":true,"ts":1694953991111,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991111}
2023-09-17 14:33:11.154 - info: ham.0 (2102) stateChange ham.0.Device3c65fe-Sonoff-Schalter.Device3c65fe-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD+ENAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.155 - info: ham.0 (2102) stateChange ham.0.S26Hauseingang.S26Hauseingang-History.S2R1 {"val":"IjF+AQAAAABl+DgpAQ4BwA/AD7mTAAAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.157 - info: ham.0 (2102) stateChange ham.0.Abstellraum.Abstellraum-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/AD6CNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.161 - info: ham.0 (2102) stateChange ham.0.Bau-WC-Licht.Bau-WC-Licht-History.S2R1 {"val":"NjGIAgAAAABR+C4oAQ4BwA/ADxoDAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.161 - info: ham.0 (2102) stateChange ham.0.Device4d7fc5-S26-Sonoff-Ham.Device4d7fc5-S26-Sonoff-Ham-History.S2R1 {"val":"aiefAgAAAAAdAhgoAQ4BwA/AD5ANAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.163 - info: ham.0 (2102) stateChange ham.0.Device3be921-S20-Sonoff-1.Device3be921-S20-Sonoff-1-History.S2R1 {"val":"aiefAgAAAAAdAhgoAQ4BwA/AD6QNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.165 - info: ham.0 (2102) stateChange ham.0.Device6aae8d-Sonoff-Schalter.Device6aae8d-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD/AOAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.166 - info: ham.0 (2102) stateChange ham.0.Device4110d0-Sonoff-Schalter.Device4110d0-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD+YNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.168 - info: ham.0 (2102) stateChange ham.0.Christbaum.Christbaum-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/AD4RfAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.170 - info: ham.0 (2102) stateChange ham.0.Vitrine.Vitrine-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD/MNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.172 - info: ham.0 (2102) stateChange ham.0.Garagentor.Garagentor-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/ADzFwAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.173 - info: ham.0 (2102) stateChange ham.0.Toilette.Toilette-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/ADxZ+AQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.175 - info: ham.0 (2102) stateChange ham.0.Pool.Pool-History.S2R1 {"val":"CdqjAgAAAAB+TxMoAgECDgHAD8APAwkBAAAAAAABAQ==","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
-
Ich hoffe, das ist die full Version...
======== Start marking the full check here =========Skript v.2023-06-20
*** BASE SYSTEM ***
Static hostname: q4os-desktop
Icon name: computer-desktop
Chassis: desktop
Machine ID: 163dfadd781c44cd94d7a397cdd870ff
Boot ID: aec401992f534ee8ad15c09fdff5e2d4
Operating System: Debian GNU/Linux 11 (bullseye)
Kernel: Linux 5.10.0-21-amd64
Architecture: x86-64model name : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz
Docker : false
Virtualization : none
Kernel : x86_64
Userland : amd64Systemuptime and Load:
14:33:42 up 1:41, 1 user, load average: 1.26, 1.06, 1.22
CPU threads: 4*** Time and Time Zones ***
Local time: Sun 2023-09-17 14:33:42 CEST
Universal time: Sun 2023-09-17 12:33:42 UTC
RTC time: Sun 2023-09-17 12:33:42
Time zone: Europe/Vienna (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** User and Groups ***
peter
/home/peter
peter dialout cdrom floppy sudo audio dip video plugdev users netdev lpadmin bluetooth scanner iobroker*** X-Server-Setup ***
X-Server: true
Desktop: trinity
Terminal: x11
Boot Target: graphical.target*** MEMORY ***
total used free shared buff/cache available
Mem: 15G 4.3G 9.0G 289M 2.7G 11G
Swap: 9.2G 0B 9.2G
Total: 25G 4.3G 18G15893 M total memory 4286 M used memory 649 M active memory 5612 M inactive memory 8956 M free memory 181 M buffer memory 2468 M swap cache 9167 M total swap 0 M used swap 9167 M free swap*** FILESYSTEM ***
df: /run/user/1000/doc: Operation not permitted
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs tmpfs 1.6G 2.8M 1.6G 1% /run
/dev/mapper/q4os--desktop--vg-root ext4 91G 25G 62G 29% /
tmpfs tmpfs 7.8G 56M 7.8G 1% /dev/shm
tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock
/dev/nvme0n1p1 ext2 470M 366M 80M 83% /boot
tmpfs tmpfs 1.6G 36K 1.6G 1% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Sun Sep 17 12:51:57 2023] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sun Sep 17 12:51:57 2023] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[Sun Sep 17 12:51:58 2023] EXT4-fs (nvme0n1p1): mounting ext2 file system using the ext4 subsystem
[Sun Sep 17 12:51:58 2023] EXT4-fs (nvme0n1p1): mounted filesystem without journal. Opts: (null)Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mapper/q4os--desktop--vg-root ext4 rw,relatime,errors=remount-ro
|-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
`-/boot /dev/nvme0n1p1 ext2 rw,relatimeFiles in neuralgic directories:
/var:
6.3G /var/
4.2G /var/log/journal/163dfadd781c44cd94d7a397cdd870ff
4.2G /var/log/journal
4.2G /var/log
1.8G /var/libHint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.
Pass -q to turn off this notice.
Archived and active journals take up 160.0M in the file system./opt/iobroker/backups:
89M /opt/iobroker/backups//opt/iobroker/iobroker-data:
2.4G /opt/iobroker/iobroker-data/
2.0G /opt/iobroker/iobroker-data/history
202M /opt/iobroker/iobroker-data/files
167M /opt/iobroker/iobroker-data/backup-objects
52M /opt/iobroker/iobroker-data/files/javascript.adminThe five largest files in iobroker-data are:
35M /opt/iobroker/iobroker-data/states.jsonl
23M /opt/iobroker/iobroker-data/objects.jsonl
21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
16M /opt/iobroker/iobroker-data/objects.json.migrated*** NodeJS-Installation ***
/usr/bin/nodejs v16.19.1
/usr/bin/node v16.19.1
/usr/bin/npm 8.19.3
/usr/bin/npx 8.19.3nodejs:
Installed: 16.19.1-deb-1nodesource1
Candidate: 16.20.2-deb-1nodesource1
Version table:
16.20.2-deb-1nodesource1 500
500 https://deb.nodesource.com/node_16.x bullseye/main amd64 Packages
*** 16.19.1-deb-1nodesource1 100
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://security.debian.org/debian-security bullseye-security/main amd64 Packages
12.22.12~dfsg-1~deb11u3 500
500 http://ftp.at.debian.org/debian bullseye/main amd64 Packages
500 http://ftp.debian.org/debian bullseye/main amd64 PackagesTemp directories causing npm8 problem: 0
No problems detectednpm ERR! code ELSPROBLEMS
npm ERR! missing: homebridge-ewelink@^11.0.2, required by iobroker.ham@5.3.1npm ERR! A complete log of this run can be found in:
npm ERR! /home/peter/.npm/_logs/2023-09-17T12_33_51_450Z-debug-0.log
Errors in npm tree: 0*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlNo configuration change needed.
Multihost discovery server: disabled
Discovery authentication: enabled
Persistent activation: disabled
Objects: jsonl on 127.0.0.1
States: jsonl on 127.0.0.1Core adapters versions
js-controller: 5.0.12
admin: 6.8.0
javascript: 7.1.4Adapters from github: 0
Adapter State
-
system.adapter.admin.0 : admin : q4os-desktop - enabled, port: 8081, bind: 0.0.0.0, run as: admin
-
system.adapter.alexa2.0 : alexa2 : q4os-desktop - enabled
-
system.adapter.backitup.0 : backitup : q4os-desktop - enabled
-
system.adapter.bosch-ebike.0 : bosch-ebike : q4os-desktop - enabled
-
system.adapter.broadlink2.0 : broadlink2 : q4os-desktop - enabled
system.adapter.cloud.0 : cloud : q4os-desktop - disabled
system.adapter.daswetter.0 : daswetter : q4os-desktop - enabled -
system.adapter.device-reminder.0 : device-reminder : q4os-desktop - enabled
-
system.adapter.device-watcher.0 : device-watcher : q4os-desktop - enabled
-
system.adapter.discovery.0 : discovery : q4os-desktop - enabled
-
system.adapter.fb-checkpresence.0 : fb-checkpresence : q4os-desktop - enabled
system.adapter.flot.0 : flot : q4os-desktop - enabled -
system.adapter.fronius.0 : fronius : q4os-desktop - enabled
system.adapter.fuelpricemonitor.0 : fuelpricemonitor : q4os-desktop - enabled -
system.adapter.go-e.0 : go-e : q4os-desktop - enabled
-
system.adapter.ham.0 : ham : q4os-desktop - enabled
-
system.adapter.history.0 : history : q4os-desktop - enabled
-
system.adapter.hmip.0 : hmip : q4os-desktop - enabled
-
system.adapter.hs100.0 : hs100 : q4os-desktop - enabled
system.adapter.info.0 : info : q4os-desktop - enabled -
system.adapter.iot.0 : iot : q4os-desktop - enabled
-
system.adapter.javascript.0 : javascript : q4os-desktop - enabled
-
system.adapter.mercedesme.0 : mercedesme : q4os-desktop - enabled
-
system.adapter.mihome.0 : mihome : q4os-desktop - enabled, port: 9898, bind: 0.0.0.0
-
system.adapter.mqtt.0 : mqtt : q4os-desktop - enabled, port: 1886, bind: 0.0.0.0
system.adapter.netatmo-crawler.0 : netatmo-crawler : q4os-desktop - enabled -
system.adapter.netatmo.0 : netatmo : q4os-desktop - enabled
-
system.adapter.opendtu.0 : opendtu : q4os-desktop - enabled
-
system.adapter.shelly.0 : shelly : q4os-desktop - enabled, port: 1882, bind: 0.0.0.0
-
system.adapter.sonoff.0 : sonoff : q4os-desktop - enabled, port: 1884, bind: 0.0.0.0
-
system.adapter.sureflap.0 : sureflap : q4os-desktop - enabled
-
system.adapter.telegram.0 : telegram : q4os-desktop - enabled, port: 8443, bind: 0.0.0.0
-
system.adapter.tuya.0 : tuya : q4os-desktop - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : q4os-desktop - enabled -
system.adapter.vis-inventwo.0 : vis-inventwo : q4os-desktop - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : q4os-desktop - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : q4os-desktop - enabled
system.adapter.vis-weather.0 : vis-weather : q4os-desktop - enabled
system.adapter.vis.0 : vis : q4os-desktop - enabled -
system.adapter.web.0 : web : q4os-desktop - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-
system.adapter.zigbee.0 : zigbee : q4os-desktop - enabled, port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
-
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : q4os-desktop - enabled, port: 8081, bind: 0.0.0.0, run as: admin
- system.adapter.mihome.0 : mihome : q4os-desktop - enabled, port: 9898, bind: 0.0.0.0
- system.adapter.mqtt.0 : mqtt : q4os-desktop - enabled, port: 1886, bind: 0.0.0.0
- system.adapter.shelly.0 : shelly : q4os-desktop - enabled, port: 1882, bind: 0.0.0.0
- system.adapter.sonoff.0 : sonoff : q4os-desktop - enabled, port: 1884, bind: 0.0.0.0
- system.adapter.telegram.0 : telegram : q4os-desktop - enabled, port: 8443, bind: 0.0.0.0
- system.adapter.web.0 : web : q4os-desktop - enabled, port: 8082, bind: 0.0.0.0, run as: admin
- system.adapter.zigbee.0 : zigbee : q4os-desktop - enabled, port: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.jsonActive repo(s): Stable (default)
Installed ioBroker-Instances
Used repository: Stable (default)
Adapter "admin" : 6.8.0 , installed 6.8.0
Adapter "alexa2" : 3.24.1 , installed 3.24.1
Adapter "backitup" : 2.6.23 , installed 2.6.23
Adapter "bosch-ebike" : 0.0.3 , installed 0.0.3
Adapter "broadlink2" : 2.1.5 , installed 2.1.5
Adapter "cloud" : 4.4.1 , installed 4.4.1
Adapter "daswetter" : 3.1.10 , installed 3.1.10
Adapter "device-reminder": 1.2.9 , installed 1.2.9
Adapter "device-watcher": 2.9.3 , installed 2.9.3
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter "flot" : 1.12.0 , installed 1.12.0
Adapter "fronius" : 1.1.3 , installed 1.1.3
Adapter "fuelpricemonitor": 0.3.6 , installed 0.3.6
Adapter "go-e" : 1.0.27 , installed 1.0.27
Adapter "ham" : 5.3.1 , installed 5.3.1
Adapter "history" : 2.2.6 , installed 2.2.6
Adapter "hmip" : 1.20.0 , installed 1.20.0
Adapter "hs100" : 2.1.2 , installed 2.1.2
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "iot" : 1.14.5 , installed 1.14.5
Adapter "javascript" : 7.1.4 , installed 7.1.4
Controller "js-controller": 5.0.12 , installed 5.0.12
Adapter "mercedesme" : 0.1.1 , installed 0.1.1
Adapter "mihome" : 1.4.0 , installed 1.4.0
Adapter "mqtt" : 4.1.1 , installed 4.1.1
Adapter "netatmo" : 3.1.0 , installed 3.1.0
Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1
Adapter "opendtu" : 0.1.7 , installed 0.1.7
Adapter "shelly" : 6.4.1 , installed 6.4.1
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "socketio" : 6.5.5 , installed 6.5.5
Adapter "sonoff" : 2.5.3 , installed 2.5.3
Adapter "sureflap" : 1.2.0 , installed 1.2.0
Adapter "telegram" : 1.16.0 , installed 1.16.0
Adapter "tuya" : 3.14.2 , installed 3.14.2
Adapter "vis" : 1.4.16 , installed 1.4.16
Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0
Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "vis-weather" : 2.5.6 , installed 2.5.6
Adapter "web" : 6.1.2 , installed 6.1.2
Adapter "ws" : 2.5.5 , installed 2.5.5
Adapter "zigbee" : 1.8.23 , installed 1.8.23Objects and States
Please stand by - This may take a while
Objects: 27363
States: 20597*** OS-Repositories and Updates ***
E: Failed to fetch http://ppa.launchpad.net/morphis/anbox-support/ubuntu/dists/jammy/InRelease 403 Forbidden [IP: 185.125.190.52 80]
E: The repository 'http://ppa.launchpad.net/morphis/anbox-support/ubuntu jammy InRelease' is not signed.
E: The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file.
Pending Updates: 203*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 19753 1264/exim4
tcp 0 0 127.0.0.1:1883 0.0.0.0:* LISTEN 114 19499 662/mosquitto
tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 22616 1601/io.sonoff.0
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15224 986/smbd
tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 24947 2158/io.mqtt.0
tcp 0 0 127.0.0.1:3551 0.0.0.0:* LISTEN 0 20164 931/apcupsd
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 20811 633/iobroker.js-con
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 20788 633/iobroker.js-con
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15225 986/smbd
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 9850 1/init
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 20497 632/cupsd
tcp6 0 0 ::1:25 :::* LISTEN 0 19754 1264/exim4
tcp6 0 0 ::1:1883 :::* LISTEN 114 19500 662/mosquitto
tcp6 0 0 :::445 :::* LISTEN 0 15222 986/smbd
tcp6 0 0 :::139 :::* LISTEN 0 15223 986/smbd
tcp6 0 0 :::111 :::* LISTEN 0 9854 1/init
tcp6 0 0 :::8081 :::* LISTEN 1001 20981 1342/io.admin.0
tcp6 0 0 :::8082 :::* LISTEN 1001 56228 5884/io.web.0
tcp6 0 0 :::6547 :::* LISTEN 0 19234 668/java
tcp6 0 0 ::1:631 :::* LISTEN 0 20496 632/cupsd
udp 0 0 0.0.0.0:45081 0.0.0.0:* 106 18261 566/avahi-daemon: r
udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 26664 2102/io.ham.0
udp 0 0 224.0.0.251:5353 0.0.0.0:* 1000 23241 1657/chrome
udp 0 0 0.0.0.0:5353 0.0.0.0:* 106 18259 566/avahi-daemon: r
udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 22575 1586/io.shelly.0
udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 21162 1616/io.tuya.0
udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 21163 1616/io.tuya.0
udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 25907 2417/io.broadlink2.
udp 0 0 0.0.0.0:56606 0.0.0.0:* 1001 27109 2417/io.broadlink2.
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 9851 1/init
udp 0 0 192.168.2.255:137 0.0.0.0:* 0 18964 895/nmbd
udp 0 0 192.168.2.222:137 0.0.0.0:* 0 18963 895/nmbd
udp 0 0 0.0.0.0:137 0.0.0.0:* 0 18950 895/nmbd
udp 0 0 192.168.2.255:138 0.0.0.0:* 0 18966 895/nmbd
udp 0 0 192.168.2.222:138 0.0.0.0:* 0 18965 895/nmbd
udp 0 0 0.0.0.0:138 0.0.0.0:* 0 18951 895/nmbd
udp 0 0 0.0.0.0:631 0.0.0.0:* 0 20516 743/cups-browsed
udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 23354 2147/io.mihome.0
udp 0 0 0.0.0.0:43843 0.0.0.0:* 1001 25293 2417/io.broadlink2.
udp6 0 0 :::5353 :::* 106 18260 566/avahi-daemon: r
udp6 0 0 :::46479 :::* 0 19222 668/java
udp6 0 0 :::111 :::* 0 9857 1/init
udp6 0 0 :::3052 :::* 0 20869 668/java
udp6 0 0 :::60662 :::* 106 18262 566/avahi-daemon: r*** Log File - Last 25 Lines ***
2023-09-17 14:30:00.036 - info: host.q4os-desktop instance system.adapter.netatmo-crawler.0 started with pid 8970
2023-09-17 14:30:01.380 - info: netatmo-crawler.0 (8970) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v16.19.1, js-controller: 5.0.12
2023-09-17 14:30:01.456 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:53:39:f8
2023-09-17 14:30:01.804 - warn: netatmo-crawler.0 (8970) Could not work with station 1 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:01.807 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:7f:96:be
2023-09-17 14:30:02.094 - warn: netatmo-crawler.0 (8970) Could not work with station 2 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:02.095 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:27:ac:9a
2023-09-17 14:30:02.394 - warn: netatmo-crawler.0 (8970) Could not work with station 3 - Message: Error: undefined is not a valid state value
2023-09-17 14:30:02.397 - info: netatmo-crawler.0 (8970) Getting data for stationid:70:ee:50:96:a4:36
2023-09-17 14:30:03.866 - info: netatmo-crawler.0 (8970) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-09-17 14:30:04.399 - info: host.q4os-desktop instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-17 14:33:11.113 - info: ham.0 (2102) stateChange ham.0.Messsteckdose.Messsteckdose-History.S2R1 {"val":"uLYLAAAAAADPcqsqAQ4BAgXADwAAAAAAAAAAAQE=","ack":true,"ts":1694953991111,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991111}
2023-09-17 14:33:11.154 - info: ham.0 (2102) stateChange ham.0.Device3c65fe-Sonoff-Schalter.Device3c65fe-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD+ENAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.155 - info: ham.0 (2102) stateChange ham.0.S26Hauseingang.S26Hauseingang-History.S2R1 {"val":"IjF+AQAAAABl+DgpAQ4BwA/AD7mTAAAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.157 - info: ham.0 (2102) stateChange ham.0.Abstellraum.Abstellraum-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/AD6CNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.161 - info: ham.0 (2102) stateChange ham.0.Bau-WC-Licht.Bau-WC-Licht-History.S2R1 {"val":"NjGIAgAAAABR+C4oAQ4BwA/ADxoDAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.161 - info: ham.0 (2102) stateChange ham.0.Device4d7fc5-S26-Sonoff-Ham.Device4d7fc5-S26-Sonoff-Ham-History.S2R1 {"val":"aiefAgAAAAAdAhgoAQ4BwA/AD5ANAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.163 - info: ham.0 (2102) stateChange ham.0.Device3be921-S20-Sonoff-1.Device3be921-S20-Sonoff-1-History.S2R1 {"val":"aiefAgAAAAAdAhgoAQ4BwA/AD6QNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.165 - info: ham.0 (2102) stateChange ham.0.Device6aae8d-Sonoff-Schalter.Device6aae8d-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD/AOAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.166 - info: ham.0 (2102) stateChange ham.0.Device4110d0-Sonoff-Schalter.Device4110d0-Sonoff-Schalter-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD+YNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.168 - info: ham.0 (2102) stateChange ham.0.Christbaum.Christbaum-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/AD4RfAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.170 - info: ham.0 (2102) stateChange ham.0.Vitrine.Vitrine-History.S2R1 {"val":"1DahAgAAAACz8hUoAQ4BwA/AD/MNAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.172 - info: ham.0 (2102) stateChange ham.0.Garagentor.Garagentor-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/ADzFwAQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.173 - info: ham.0 (2102) stateChange ham.0.Toilette.Toilette-History.S2R1 {"val":"+D9jAwAAAACP6VMnAQ4BwA/ADxZ+AQAAAAAAAQE=","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}
2023-09-17 14:33:11.175 - info: ham.0 (2102) stateChange ham.0.Pool.Pool-History.S2R1 {"val":"CdqjAgAAAAB+TxMoAgECDgHAD8APAwkBAAAAAAABAQ==","ack":true,"ts":1694953991153,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1694953991153}============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Desktop: trinity
Denn kannste direkt schon mal ausschalten. Ersatzlos.
-
-
@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Desktop: trinity
Denn kannste direkt schon mal ausschalten. Ersatzlos.
@thomas-braun
sorry, mit mir ist es nicht leicht....
was soll ich wo ausschalten? -
@thomas-braun
sorry, mit mir ist es nicht leicht....
was soll ich wo ausschalten?sudo systemctl set-default multi-user.target sudo systemctl isolate multi-user.target -
@thomas-braun
sorry, mit mir ist es nicht leicht....
was soll ich wo ausschalten?Deine Distribution ist irgendwie sehr schräg aufgestellt...
*** OS-Repositories and Updates *** E: Failed to fetch http://ppa.launchpad.net/morphis/anbox-support/ubuntu/dists/jammy/InRelease 403 Forbidden [IP: 185.125.190.52 80] E: The repository 'http://ppa.launchpad.net/morphis/anbox-support/ubuntu jammy InRelease' is not signed. E: The repository 'http://security.debian.org bullseye/updates Release' does not have a Release file. Pending Updates: 203 -
sudo systemctl set-default multi-user.target sudo systemctl isolate multi-user.target@thomas-braun
Ich bin wohl der größte Trottel….
Jetzt habe ich deine Eingaben eingegeben und jetzt verlangt er das Desktop Login von mir. Weiß ich nicht mehr und komme nicht mehr ins System. Auch ein Neustart des Rechners hilft nicht. Jetzt schreibe ich von meinem Tablet. Ich denke, jetzt wird nur mehr eine komplette Neuinstallation des Rechners helfen….
Verzweiflung pur !!!! -
@thomas-braun
Ich bin wohl der größte Trottel….
Jetzt habe ich deine Eingaben eingegeben und jetzt verlangt er das Desktop Login von mir. Weiß ich nicht mehr und komme nicht mehr ins System. Auch ein Neustart des Rechners hilft nicht. Jetzt schreibe ich von meinem Tablet. Ich denke, jetzt wird nur mehr eine komplette Neuinstallation des Rechners helfen….
Verzweiflung pur !!!!@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Weiß ich nicht mehr und komme nicht mehr ins System.
Für verbummelte Passworte kann ich ja nun nix.
-
@thomas-braun
Ich bin wohl der größte Trottel….
Jetzt habe ich deine Eingaben eingegeben und jetzt verlangt er das Desktop Login von mir. Weiß ich nicht mehr und komme nicht mehr ins System. Auch ein Neustart des Rechners hilft nicht. Jetzt schreibe ich von meinem Tablet. Ich denke, jetzt wird nur mehr eine komplette Neuinstallation des Rechners helfen….
Verzweiflung pur !!!!@peterredl sagte in Zigbee Geräte fehlen nach Upgrade auf JS-Controller 5.0:
Ich denke, jetzt wird nur mehr eine komplette Neuinstallation des Rechners helfen….
Dann nimm diesmal ein reines Debian Bookworm, ohne Desktop.
Das q4-Dingsi scheint mir jedenfalls eh etwas 'komisch'.
809
Online32.5k
Benutzer81.6k
Themen1.3m
Beiträge