Hichi IR Lesekopf verbindet sich nicht mit Smartmeter

TT-Tom

@helenelo du hattest zum Anfang gesagt , das du im Tasmota den Zählerstand schon siehst. Dann muss da auch ein Script laufen, siehe mal unter Konsole / Script da müsste was stehen.

im MQTT-Adapter unter Verbindung kein SSL anhaken.

tonishi

Hi zusammen,

ich habe ein ähnliches Problem, von dem hier bereits berichtet wurde:
Bei mir läuft ein Hichi Lesekopf mit USB am RasPi.
Stromzähler ist Logarex LK13BE803039, welcher durch PIN-Eingabe freigeschaltet ist.
Zunächst hatte ich in iobroker die smartmeter Instanz wie hier beschrieben konfiguriert https://wiki.volkszaehler.org/hardware/channels/meters/power/logarex_lk13b - das hat nicht funktioniert. Dann hatte ich diese Beiträge hier gefunden und alles auf default gelassen:

Ich habe SML: CRC-Prüfsummenfehler ignorieren sowohl deaktiviert als auch aktiviert provbiert.
Leider alles ohne Erfolg.
Ich bekomme bei jedem Versuch folgende Log-Info: "No or too long answer from Serial Device after last request."

Der IR Kopf sollte funktionieren. Wenn ich folgende Anleitung https://wiki.volkszaehler.org/hardware/controllers/ir-schreib-lesekopf-usb-aus befolge, werden nach Ausführung des Befehls "cat /dev/ttyUSB0 | od -tx1" fortlaufend Daten auisgegeben.
Auch in HTerm empfange ich mit einer Baudrate von 300 und 7E1 Konfiguration Daten.

Anchso zu den npm und nodejs Versionen:
npm -v
9.6.7
node -v
v18.17.1

Hat noch jemand einen Tipp, bin mittlerweile ratlos :/

Homoran

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

werden nach Ausführung des Befehls "cat /dev/ttyUSB0 | od -tx1" fortlaufend Daten auisgegeben.
Auch in HTerm empfange ich mit einer Baudrate von 300 und 7E1 Konfiguration Daten.

ist die USB Schnittstelle danach wieder für den Adapter freigegeben worden?

tonishi

HTerm habe ich von einem anderen Gerät verwendet an das ich den IR-Kopf angeschlossen habe. Blockiert der Befehl cat die USB Schnittstelle dauerhaft? Bin kein Linux Expert - wie kann ich sehen ob eine Anwendung eine USB Schnittstelle blockiert?

Kurzer Nachtrag beziehend auf den 4. Beitrag dieses Threads (vlt. hilft das noch weiter):

pi@raspberrypi:~ $ sudo ln -s /usr/bin/node /usr/bin/nodejs
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
aarch64
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v18.17.1
v18.17.1
9.6.7
4.0.24
pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
/home/pi
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease                                                                                         
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease                                                                          
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease                                                                                        
Hit:5 https://packages.grafana.com/oss/deb stable InRelease                                                                                           
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease                                            
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Laut https://wiki.volkszaehler.org/hardware/channels/meters/power/logarex_lk13b sendet der Zähler die Daten im d0-Format. Dennoch sollte die default Konfiguration der smartmeter Instanz beibehalten werden speziell der Punkt "Daten-Protokoll"? Habe beides bereits ausprobiert ohne Erfolg - Frage zielt auf das generelle Verständnis zur Verwendung des Adapters.

Homoran

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

sendet der Zähler die Daten im d0-Format. Dennoch sollte die default Konfiguration der smartmeter Instanz beibehalten werden

aber doch nur die jeweilgen Parameter zu dem richtigen Protokoll!

Wenn D0, dann musst du D0 einstellen.
mach das mal

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

Blockiert der Befehl cat die USB Schnittstelle dauerhaft? Bin kein Linux Expert - wie kann ich sehen ob eine Anwendung eine USB Schnittstelle blockiert?

weiss ich auch nicht, aber ein reboot macht die Schnittstelle immer wieder frei.

danach noch mal mit D0 testen und wenn's nicht klapot, die neue Konfig zeigen, sowie den debug-log

tonishi

Ok hab folgendes gemacht:

RasPi neu gestartet
smartmeter wie folgt konfiguriert
Leider ohne Erfolg:
debug-log Ausschnitt:
iobroker_.log

Homoran

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

debug-log Ausschnitt:

bitte als Text in code-tags posten

....werden nur gelesen passt nicht zu wakeup, signon....

Homoran

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

pi@raspberrypi:

ist da die 32bit version drauf?
dann könntest du in den udev-bug laufen

tonishi

ne ist ein 64bit OS drauf.

hier der log Ausschnitt:

2023-09-08 15:25:07.551  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8" -> null
2023-09-08 15:25:07.558  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3213 + NEW 8)
2023-09-08 15:25:07.560  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.561  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(0" -> null
2023-09-08 15:25:07.566  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3221 + NEW 8)
2023-09-08 15:25:07.568  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.569  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.00" -> null
2023-09-08 15:25:07.574  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3229 + NEW 8)
2023-09-08 15:25:07.575  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.577  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r" -> null
2023-09-08 15:25:07.582  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3237 + NEW 6)
2023-09-08 15:25:07.584  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.585  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0" -> null
2023-09-08 15:25:07.591  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3243 + NEW 8)
2023-09-08 15:25:07.592  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.593  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255" -> null
2023-09-08 15:25:07.600  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3251 + NEW 8)
2023-09-08 15:25:07.601  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.602  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03," -> null
2023-09-08 15:25:07.608  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3259 + NEW 8)
2023-09-08 15:25:07.609  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.610  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,201" -> null
2023-09-08 15:25:07.616  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3267 + NEW 8)
2023-09-08 15:25:07.617  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.618  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n" -> null
2023-09-08 15:25:07.624  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3275 + NEW 6)
2023-09-08 15:25:07.625  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.626  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96" -> null
2023-09-08 15:25:07.631  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3281 + NEW 8)
2023-09-08 15:25:07.633  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.634  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*25" -> null
2023-09-08 15:25:07.641  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3289 + NEW 8)
2023-09-08 15:25:07.642  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.643  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r" -> null
2023-09-08 15:25:07.649  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3297 + NEW 7)
2023-09-08 15:25:07.650  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.651  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97" -> null
2023-09-08 15:25:07.658  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3304 + NEW 9)
2023-09-08 15:25:07.659  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.661  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255" -> null
2023-09-08 15:25:07.667  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3313 + NEW 7)
2023-09-08 15:25:07.668  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.683  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(000000" -> null
2023-09-08 15:25:07.690  - [34mdebug[39m: smartmeter.0 (865) ADD NEW DATA (3320 + NEW 8)
2023-09-08 15:25:07.691  - [34mdebug[39m: smartmeter.0 (865) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 15:25:07.692  - [34mdebug[39m: smartmeter.0 (865) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1316*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϛ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1317*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����bϾ\u0012+゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1318*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�����Ϻ\u0012?ズ���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1319*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1320*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1321*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1322*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n���T\u0013j*�\u0012?゚���j\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1323*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1324*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1325*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1326*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1327*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����b-Ϛ\u0012\u0015�03039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1328*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1329*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017781.1330*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 15:25:08.352  - [32minfo[39m: host.raspberrypi "system.adapter.smartmeter.0" disabled
2023-09-08 15:25:08.354  - [32minfo[39m: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true)
2023-09-08 15:25:08.371  - [32minfo[39m: smartmeter.0 (865) Got terminate signal TERMINATE_YOURSELF
2023-09-08 15:25:08.382  - [34mdebug[39m: smartmeter.0 (865) SERIALPORT CLOSE
2023-09-08 15:25:08.384  - [32minfo[39m: smartmeter.0 (865) terminating
2023-09-08 15:25:08.386  - [34mdebug[39m: smartmeter.0 (865) Plugin sentry destroyed
2023-09-08 15:25:08.387  - [32minfo[39m: smartmeter.0 (865) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-08 15:25:08.408  - [32minfo[39m: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal
2023-09-08 15:25:08.983  - [32minfo[39m: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Anscheinend ließt er den Gesamtverbrauch usw. korrekt aus, aber dennoch wird die Instanz nicht korrekt eingebunden

Homoran

@tonishi hab mal gesucht
https://forum.iobroker.net/search?term=Logarex LK13B&in=titlesposts

da ist auch ein post von mir, für den ich wohl gefunden habe dass es logarex lk13b wohl auch mit SML gibt

Insgesamt viel lesestoff!

tonishi

das stimmt, steht auch hier https://wiki.volkszaehler.org/hardware/channels/meters/power/logarex_lk13b
Der Zähler hier ist jedoch Baujahr 2019 und SW-Version .3
In dem Artikel von Volkszaehler steht, dass SML z.B. bei Baujahr 2021 und SW.-Version .4 implementiert ist. Habe daraus gelesen, dass es bei älteren Versionen eher d0 ist.

Aber auch mit SML und default Konfiguration wird die Instanz nicht grün :/

Homoran

@tonishi hab auch nochmal viel gelesen.
oben die Einstellungen passen!

aber Wartezeit auf Antwort solltest du vllt. mal auf 1sec. setzen

tonishi

du meinst so?

leider auch nicht erfolgreich

Homoran

@tonishi das ist kein debug log und nicht in code-tags

https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

EDIT:
du hast ja gar keine Schnittstelle definiert

tonishi

Erstmal @Homoran vielen Dank für deine Hilfe!

Und sorry, war vorhin auf dem Sprung und das ist dabei rausgekommen. Also hier nochmal der korrekte screenshot und der zugehörige log:

2023-09-08 19:19:08.853  - [32minfo[39m: admin.0 (783) ==> Connected system.user.admin from ::ffff:192.168.2.113
2023-09-08 19:19:14.104  - [32minfo[39m: admin.0 (783) <== Disconnect system.user.admin from ::ffff:192.168.2.113 
2023-09-08 19:19:17.958  - [32minfo[39m: host.raspberrypi "system.adapter.smartmeter.0" enabled
2023-09-08 19:19:18.066  - [32minfo[39m: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 885
2023-09-08 19:19:21.828  - [34mdebug[39m: smartmeter.0 (885) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-09-08 19:19:21.925  - [34mdebug[39m: smartmeter.0 (885) Objects client ready ... initialize now
2023-09-08 19:19:21.935  - [34mdebug[39m: smartmeter.0 (885) Objects create System PubSub Client
2023-09-08 19:19:21.939  - [34mdebug[39m: smartmeter.0 (885) Objects create User PubSub Client
2023-09-08 19:19:22.033  - [34mdebug[39m: smartmeter.0 (885) Objects client initialize lua scripts
2023-09-08 19:19:22.055  - [34mdebug[39m: smartmeter.0 (885) Objects connected to redis: 127.0.0.1:9001
2023-09-08 19:19:22.099  - [34mdebug[39m: smartmeter.0 (885) Redis States: Use Redis connection: 127.0.0.1:9000
2023-09-08 19:19:22.119  - [34mdebug[39m: smartmeter.0 (885) States create System PubSub Client
2023-09-08 19:19:22.121  - [34mdebug[39m: smartmeter.0 (885) States create User PubSub Client
2023-09-08 19:19:22.150  - [34mdebug[39m: smartmeter.0 (885) States connected to redis: 127.0.0.1:9000
2023-09-08 19:19:22.220  - [34mdebug[39m: smartmeter.0 (885) Plugin sentry Initialize Plugin (enabled=true)
2023-09-08 19:19:23.187  - [32minfo[39m: smartmeter.0 (885) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v18.17.1, js-controller: 4.0.24
2023-09-08 19:19:23.265  - [34mdebug[39m: smartmeter.0 (885) SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"6","anotherQueryDelay":"1000","transportSerialPort":"/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0019-if00-port0","transportSerialBaudrate":null,"transportSerialMessageTimeout":1000,"protocolD0WakeupCharacters":0,"obisFallbackMedium":1}
2023-09-08 19:19:23.271  - [34mdebug[39m: smartmeter.0 (885) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:19:23.290  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT OPEN
2023-09-08 19:19:23.340  - [34mdebug[39m: smartmeter.0 (885) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:19:23.421  - [34mdebug[39m: smartmeter.0 (885) connected set to false
2023-09-08 19:19:23.488  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (0 + NEW 2)
2023-09-08 19:19:23.491  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.493  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "��" -> null
2023-09-08 19:19:23.499  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (2 + NEW 8)
2023-09-08 19:19:23.501  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.503  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE" -> null
2023-09-08 19:19:23.510  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (10 + NEW 9)
2023-09-08 19:19:23.512  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.513  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r" -> null
2023-09-08 19:19:23.521  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (19 + NEW 9)
2023-09-08 19:19:23.523  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.524  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1" -> null
2023-09-08 19:19:23.530  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (28 + NEW 10)
2023-09-08 19:19:23.531  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.533  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001" -> null
2023-09-08 19:19:23.540  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (38 + NEW 8)
2023-09-08 19:19:23.543  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.545  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG00653" -> null
2023-09-08 19:19:23.550  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (46 + NEW 11)
2023-09-08 19:19:23.552  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.554  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0" -> null
2023-09-08 19:19:23.560  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (57 + NEW 8)
2023-09-08 19:19:23.562  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.563  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*2" -> null
2023-09-08 19:19:23.569  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (65 + NEW 8)
2023-09-08 19:19:23.571  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.577  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(01778" -> null
2023-09-08 19:19:23.583  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (73 + NEW 13)
2023-09-08 19:19:23.586  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.587  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n" -> null
2023-09-08 19:19:23.595  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (86 + NEW 9)
2023-09-08 19:19:23.597  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.598  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0" -> null
2023-09-08 19:19:23.604  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (95 + NEW 10)
2023-09-08 19:19:23.606  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.607  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(00000" -> null
2023-09-08 19:19:23.613  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (105 + NEW 9)
2023-09-08 19:19:23.615  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.616  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kW" -> null
2023-09-08 19:19:23.623  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (114 + NEW 8)
2023-09-08 19:19:23.625  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.626  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:" -> null
2023-09-08 19:19:23.633  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (122 + NEW 9)
2023-09-08 19:19:23.635  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.637  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255" -> null
2023-09-08 19:19:23.642  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (131 + NEW 9)
2023-09-08 19:19:23.644  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.646  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,4" -> null
2023-09-08 19:19:23.651  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (140 + NEW 9)
2023-09-08 19:19:23.653  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.655  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170" -> null
2023-09-08 19:19:23.660  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (149 + NEW 7)
2023-09-08 19:19:23.662  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.664  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1" -> null
2023-09-08 19:19:23.681  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (156 + NEW 11)
2023-09-08 19:19:23.682  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.683  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*" -> null
2023-09-08 19:19:23.688  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (167 + NEW 16)
2023-09-08 19:19:23.690  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.692  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:9" -> null
2023-09-08 19:19:23.698  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (183 + NEW 8)
2023-09-08 19:19:23.701  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.702  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*2" -> null
2023-09-08 19:19:23.708  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (191 + NEW 10)
2023-09-08 19:19:23.710  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.711  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(0000000" -> null
2023-09-08 19:19:23.717  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (201 + NEW 7)
2023-09-08 19:19:23.718  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:23.720  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1143*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:19:24.342  - [34mdebug[39m: smartmeter.0 (885) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:19:24.344  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:24.347  - [33mwarn[39m: smartmeter.0 (885) No or too long answer from Serial Device after last request.
2023-09-08 19:19:24.348  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:24.349  - [34mdebug[39m: smartmeter.0 (885) Transport Reset!! Restart = true
2023-09-08 19:19:24.357  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT CLOSE
2023-09-08 19:19:24.360  - [34mdebug[39m: smartmeter.0 (885) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:19:27.033  - [32minfo[39m: admin.0 (783) ==> Connected system.user.admin from ::ffff:192.168.2.113
2023-09-08 19:19:27.215  - [34mdebug[39m: smartmeter.0 (885) Message received = {"command":"listUart","message":null,"from":"system.adapter.admin.0","callback":{"message":null,"id":18,"ack":false,"time":1694197167210},"_id":3023152}
2023-09-08 19:19:27.617  - [32minfo[39m: smartmeter.0 (885) List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0019","pnpId":"usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0019-if00-port0","vendorId":"10c4","productId":"ea60"}]
2023-09-08 19:19:30.362  - [34mdebug[39m: smartmeter.0 (885) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:19:30.370  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT OPEN
2023-09-08 19:19:30.376  - [34mdebug[39m: smartmeter.0 (885) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:19:30.596  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (0 + NEW 1)
2023-09-08 19:19:30.598  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.600  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "�" -> null
2023-09-08 19:19:30.607  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (1 + NEW 8)
2023-09-08 19:19:30.610  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.612  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13B" -> null
2023-09-08 19:19:30.622  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (9 + NEW 14)
2023-09-08 19:19:30.625  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.626  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0" -> null
2023-09-08 19:19:30.633  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (23 + NEW 9)
2023-09-08 19:19:30.635  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.637  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*2" -> null
2023-09-08 19:19:30.647  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (32 + NEW 15)
2023-09-08 19:19:30.650  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.651  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG006531" -> null
2023-09-08 19:19:30.659  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (47 + NEW 9)
2023-09-08 19:19:30.662  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.664  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-" -> null
2023-09-08 19:19:30.671  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (56 + NEW 11)
2023-09-08 19:19:30.673  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.675  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255" -> null
2023-09-08 19:19:30.682  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (67 + NEW 10)
2023-09-08 19:19:30.684  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.686  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.11" -> null
2023-09-08 19:19:30.693  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (77 + NEW 9)
2023-09-08 19:19:30.695  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.697  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n" -> null
2023-09-08 19:19:30.704  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (86 + NEW 10)
2023-09-08 19:19:30.706  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.708  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*" -> null
2023-09-08 19:19:30.716  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (96 + NEW 11)
2023-09-08 19:19:30.718  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.720  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000." -> null
2023-09-08 19:19:30.726  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (107 + NEW 11)
2023-09-08 19:19:30.727  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.729  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n" -> null
2023-09-08 19:19:30.736  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (118 + NEW 9)
2023-09-08 19:19:30.737  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.739  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0" -> null
2023-09-08 19:19:30.746  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (127 + NEW 11)
2023-09-08 19:19:30.747  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.749  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03" -> null
2023-09-08 19:19:30.754  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (138 + NEW 7)
2023-09-08 19:19:30.756  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.758  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,2" -> null
2023-09-08 19:19:30.764  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (145 + NEW 8)
2023-09-08 19:19:30.766  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.768  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)" -> null
2023-09-08 19:19:30.776  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (153 + NEW 10)
2023-09-08 19:19:30.779  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.781  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.9" -> null
2023-09-08 19:19:30.789  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (163 + NEW 12)
2023-09-08 19:19:30.792  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.793  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66" -> null
2023-09-08 19:19:30.801  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (175 + NEW 12)
2023-09-08 19:19:30.802  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.804  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97" -> null
2023-09-08 19:19:30.810  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (187 + NEW 9)
2023-09-08 19:19:30.811  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.813  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00" -> null
2023-09-08 19:19:30.819  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (196 + NEW 8)
2023-09-08 19:19:30.821  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.824  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r" -> null
2023-09-08 19:19:30.829  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (204 + NEW 4)
2023-09-08 19:19:30.831  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:30.832  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1172*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:19:31.379  - [34mdebug[39m: smartmeter.0 (885) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:19:31.381  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:31.381  - [33mwarn[39m: smartmeter.0 (885) No or too long answer from Serial Device after last request.
2023-09-08 19:19:31.382  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:31.383  - [34mdebug[39m: smartmeter.0 (885) Transport Reset!! Restart = true
2023-09-08 19:19:31.389  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT CLOSE
2023-09-08 19:19:31.390  - [34mdebug[39m: smartmeter.0 (885) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:19:37.390  - [34mdebug[39m: smartmeter.0 (885) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:19:37.397  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT OPEN
2023-09-08 19:19:37.401  - [34mdebug[39m: smartmeter.0 (885) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:19:37.485  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (0 + NEW 1)
2023-09-08 19:19:37.486  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.487  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "�" -> null
2023-09-08 19:19:37.491  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (1 + NEW 4)
2023-09-08 19:19:37.493  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.494  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b" -> null
2023-09-08 19:19:37.500  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (5 + NEW 7)
2023-09-08 19:19:37.503  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.505  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE80" -> null
2023-09-08 19:19:37.516  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (12 + NEW 11)
2023-09-08 19:19:37.517  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.518  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0" -> null
2023-09-08 19:19:37.526  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (23 + NEW 10)
2023-09-08 19:19:37.528  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.532  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*25" -> null
2023-09-08 19:19:37.539  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (33 + NEW 13)
2023-09-08 19:19:37.541  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.542  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG00653" -> null
2023-09-08 19:19:37.551  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (46 + NEW 10)
2023-09-08 19:19:37.554  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.556  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-" -> null
2023-09-08 19:19:37.568  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (56 + NEW 11)
2023-09-08 19:19:37.583  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.584  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255" -> null
2023-09-08 19:19:37.589  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (67 + NEW 25)
2023-09-08 19:19:37.591  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.592  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2." -> null
2023-09-08 19:19:37.597  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (92 + NEW 8)
2023-09-08 19:19:37.599  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.600  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(" -> null
2023-09-08 19:19:37.606  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (100 + NEW 7)
2023-09-08 19:19:37.608  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.609  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000." -> null
2023-09-08 19:19:37.616  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (107 + NEW 9)
2023-09-08 19:19:37.629  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.631  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)" -> null
2023-09-08 19:19:37.641  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (116 + NEW 24)
2023-09-08 19:19:37.643  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.644  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,4" -> null
2023-09-08 19:19:37.651  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (140 + NEW 8)
2023-09-08 19:19:37.653  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.655  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,2017" -> null
2023-09-08 19:19:37.662  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (148 + NEW 10)
2023-09-08 19:19:37.664  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.666  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0" -> null
2023-09-08 19:19:37.673  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (158 + NEW 10)
2023-09-08 19:19:37.675  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.676  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*2" -> null
2023-09-08 19:19:37.685  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (168 + NEW 9)
2023-09-08 19:19:37.686  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.688  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r" -> null
2023-09-08 19:19:37.696  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (177 + NEW 11)
2023-09-08 19:19:37.699  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.701  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97." -> null
2023-09-08 19:19:37.708  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (188 + NEW 12)
2023-09-08 19:19:37.710  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.711  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(000000" -> null
2023-09-08 19:19:37.719  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (200 + NEW 8)
2023-09-08 19:19:37.721  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:37.722  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1200*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:19:38.403  - [34mdebug[39m: smartmeter.0 (885) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:19:38.405  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:38.406  - [33mwarn[39m: smartmeter.0 (885) No or too long answer from Serial Device after last request.
2023-09-08 19:19:38.406  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:38.407  - [34mdebug[39m: smartmeter.0 (885) Transport Reset!! Restart = true
2023-09-08 19:19:38.415  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT CLOSE
2023-09-08 19:19:38.417  - [34mdebug[39m: smartmeter.0 (885) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:19:44.418  - [34mdebug[39m: smartmeter.0 (885) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:19:44.427  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT OPEN
2023-09-08 19:19:44.430  - [34mdebug[39m: smartmeter.0 (885) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:19:44.593  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (0 + NEW 1)
2023-09-08 19:19:44.595  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.595  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "�" -> null
2023-09-08 19:19:44.600  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (1 + NEW 3)
2023-09-08 19:19:44.601  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.602  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����" -> null
2023-09-08 19:19:44.608  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (4 + NEW 6)
2023-09-08 19:19:44.609  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.610  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE" -> null
2023-09-08 19:19:44.617  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (10 + NEW 8)
2023-09-08 19:19:44.618  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.619  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n" -> null
2023-09-08 19:19:44.626  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (18 + NEW 9)
2023-09-08 19:19:44.627  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.629  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96." -> null
2023-09-08 19:19:44.635  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (27 + NEW 9)
2023-09-08 19:19:44.637  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.639  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(0" -> null
2023-09-08 19:19:44.645  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (36 + NEW 8)
2023-09-08 19:19:44.647  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.649  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG006" -> null
2023-09-08 19:19:44.655  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (44 + NEW 9)
2023-09-08 19:19:44.656  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.658  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r" -> null
2023-09-08 19:19:44.670  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (53 + NEW 8)
2023-09-08 19:19:44.672  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.673  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8" -> null
2023-09-08 19:19:44.679  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (61 + NEW 15)
2023-09-08 19:19:44.681  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.682  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1" -> null
2023-09-08 19:19:44.688  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (76 + NEW 8)
2023-09-08 19:19:44.690  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.691  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)" -> null
2023-09-08 19:19:44.696  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (84 + NEW 7)
2023-09-08 19:19:44.698  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.699  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2" -> null
2023-09-08 19:19:44.706  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (91 + NEW 8)
2023-09-08 19:19:44.708  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.710  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255" -> null
2023-09-08 19:19:44.718  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (99 + NEW 10)
2023-09-08 19:19:44.720  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.722  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.00" -> null
2023-09-08 19:19:44.729  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (109 + NEW 11)
2023-09-08 19:19:44.731  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.733  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-" -> null
2023-09-08 19:19:44.744  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (120 + NEW 14)
2023-09-08 19:19:44.746  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.747  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ve" -> null
2023-09-08 19:19:44.754  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (134 + NEW 10)
2023-09-08 19:19:44.756  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.757  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F," -> null
2023-09-08 19:19:44.765  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (144 + NEW 10)
2023-09-08 19:19:44.767  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.772  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r" -> null
2023-09-08 19:19:44.778  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (154 + NEW 13)
2023-09-08 19:19:44.780  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.782  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*" -> null
2023-09-08 19:19:44.789  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (167 + NEW 10)
2023-09-08 19:19:44.791  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.792  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r" -> null
2023-09-08 19:19:44.821  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (177 + NEW 10)
2023-09-08 19:19:44.822  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.824  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97" -> null
2023-09-08 19:19:44.842  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (187 + NEW 21)
2023-09-08 19:19:44.844  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:44.845  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1229*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:19:45.298  - [32minfo[39m: admin.0 (783) <== Disconnect system.user.admin from ::ffff:192.168.2.113 
2023-09-08 19:19:45.433  - [34mdebug[39m: smartmeter.0 (885) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:19:45.434  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:45.434  - [33mwarn[39m: smartmeter.0 (885) No or too long answer from Serial Device after last request.
2023-09-08 19:19:45.435  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:45.435  - [34mdebug[39m: smartmeter.0 (885) Transport Reset!! Restart = true
2023-09-08 19:19:45.440  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT CLOSE
2023-09-08 19:19:45.442  - [34mdebug[39m: smartmeter.0 (885) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:19:51.445  - [34mdebug[39m: smartmeter.0 (885) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:19:51.455  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT OPEN
2023-09-08 19:19:51.461  - [34mdebug[39m: smartmeter.0 (885) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:19:51.486  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (0 + NEW 1)
2023-09-08 19:19:51.487  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.489  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "�" -> null
2023-09-08 19:19:51.495  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (1 + NEW 7)
2023-09-08 19:19:51.497  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.499  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13" -> null
2023-09-08 19:19:51.507  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (8 + NEW 8)
2023-09-08 19:19:51.509  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.511  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039" -> null
2023-09-08 19:19:51.519  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (16 + NEW 11)
2023-09-08 19:19:51.521  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.523  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96." -> null
2023-09-08 19:19:51.531  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (27 + NEW 12)
2023-09-08 19:19:51.533  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.535  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001L" -> null
2023-09-08 19:19:51.543  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (39 + NEW 11)
2023-09-08 19:19:51.545  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.547  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG006531874" -> null
2023-09-08 19:19:51.556  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (50 + NEW 12)
2023-09-08 19:19:51.558  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.560  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8." -> null
2023-09-08 19:19:51.568  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (62 + NEW 10)
2023-09-08 19:19:51.570  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.572  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(0177" -> null
2023-09-08 19:19:51.578  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (72 + NEW 12)
2023-09-08 19:19:51.579  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.581  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)" -> null
2023-09-08 19:19:51.587  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (84 + NEW 7)
2023-09-08 19:19:51.589  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.590  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2" -> null
2023-09-08 19:19:51.598  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (91 + NEW 10)
2023-09-08 19:19:51.600  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.601  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(0" -> null
2023-09-08 19:19:51.610  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (101 + NEW 10)
2023-09-08 19:19:51.611  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.613  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000" -> null
2023-09-08 19:19:51.619  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (111 + NEW 10)
2023-09-08 19:19:51.620  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.622  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0" -> null
2023-09-08 19:19:51.627  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (121 + NEW 8)
2023-09-08 19:19:51.629  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.630  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*2" -> null
2023-09-08 19:19:51.636  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (129 + NEW 8)
2023-09-08 19:19:51.637  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.639  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.0" -> null
2023-09-08 19:19:51.645  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (137 + NEW 8)
2023-09-08 19:19:51.647  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.649  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,2" -> null
2023-09-08 19:19:51.656  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (145 + NEW 10)
2023-09-08 19:19:51.657  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.659  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n" -> null
2023-09-08 19:19:51.665  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (155 + NEW 8)
2023-09-08 19:19:51.667  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.668  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.9" -> null
2023-09-08 19:19:51.674  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (163 + NEW 9)
2023-09-08 19:19:51.675  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.677  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0" -> null
2023-09-08 19:19:51.684  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (172 + NEW 9)
2023-09-08 19:19:51.686  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.687  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0" -> null
2023-09-08 19:19:51.697  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (181 + NEW 9)
2023-09-08 19:19:51.699  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.701  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*" -> null
2023-09-08 19:19:51.707  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (190 + NEW 11)
2023-09-08 19:19:51.709  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.711  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(0000000" -> null
2023-09-08 19:19:51.718  - [34mdebug[39m: smartmeter.0 (885) ADD NEW DATA (201 + NEW 7)
2023-09-08 19:19:51.719  - [34mdebug[39m: smartmeter.0 (885) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:19:51.721  - [34mdebug[39m: smartmeter.0 (885) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.1258*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:19:52.464  - [34mdebug[39m: smartmeter.0 (885) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:19:52.466  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:52.466  - [33mwarn[39m: smartmeter.0 (885) No or too long answer from Serial Device after last request.
2023-09-08 19:19:52.467  - [34mdebug[39m: smartmeter.0 (885) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:19:52.468  - [34mdebug[39m: smartmeter.0 (885) Transport Reset!! Restart = true
2023-09-08 19:19:52.475  - [34mdebug[39m: smartmeter.0 (885) SERIALPORT CLOSE
2023-09-08 19:19:52.476  - [34mdebug[39m: smartmeter.0 (885) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:19:57.305  - [32minfo[39m: host.raspberrypi "system.adapter.smartmeter.0" disabled
2023-09-08 19:19:57.307  - [32minfo[39m: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true)
2023-09-08 19:19:57.325  - [32minfo[39m: smartmeter.0 (885) Got terminate signal TERMINATE_YOURSELF
2023-09-08 19:19:57.330  - [32minfo[39m: smartmeter.0 (885) terminating
2023-09-08 19:19:57.334  - [34mdebug[39m: smartmeter.0 (885) Plugin sentry destroyed
2023-09-08 19:19:57.336  - [32minfo[39m: smartmeter.0 (885) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-08 19:19:57.371  - [32minfo[39m: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal
2023-09-08 19:19:57.934  - [32minfo[39m: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Homoran

@tonishi irgendwas passt nicht ganz.

was hattest du denn für Daten mit HTERM oder cat?
waren die lesbar?

edit:
Anzahl wakeup = 0??
warum?

tonishi

@homoran
bei HTerm hatte ich auf hex gestellt. Die Daten hatte ich noch nicht übersetzt, um zu schauen was raus kommt. Wollte nur sehen ob was ankommt.
Bei cat hatte ich mir das auch als hex darstellen lassen. Ebenso um zu sehen ob überhaupt was ankommt.
Hier ein Auszug von cat

pi@raspberrypi:~ $ cat /dev/ttyUSB0 | od -tx1
0000000 89 ea ea ff 62 2d cf 9a 12 15 e1 30 33 30 33 39
0000020 0d 0a 0d 0a 31 2d 30 3a 39 36 2e 31 2e 30 2a 32
0000040 35 35 28 30 30 31 4c 4f 47 30 30 36 35 33 31 38
0000060 37 34 32 29 0d 0a 31 2d 30 3a 31 2e 38 2e 30 2a
0000100 32 35 35 28 30 31 37 37 38 36 2e 33 37 31 34 2a
0000120 6b 57 68 29 0d 0a 31 2d 30 3a 32 2e 38 2e 30 2a
0000140 32 35 35 28 30 30 30 30 30 30 2e 30 30 30 30 2a
0000160 6b 57 68 29 0d 0a 31 2d 30 3a 30 2e 32 2e 30 2a
0000200 32 35 35 28 76 65 72 2e 30 33 2c 34 33 32 46 2c
0000220 32 30 31 37 30 35 30 34 29 0d 0a 31 2d 30 3a 39
0000240 36 2e 39 30 2e 32 2a 32 35 35 28 30 46 36 36 29
0000260 0d 0a 31 2d 30 3a 39 37 2e 39 37 2e 30 2a 32 35
0000300 35 28 30 30 30 30 30 30 30 30 29 0d 0a 21 0d 0a
0000320 89 fa ea d5 4c 4b 31 33 42 45 38 30 33 30 33 39
0000340 0d 0a 0d 0a 31 2d 30 3a 39 36 2e 31 2e 30 2a 32
0000360 35 35 28 30 30 31 4c 4f 47 30 30 36 35 33 31 38
0000400 37 34 32 29 0d 0a 31 2d 30 3a 31 2e 38 2e 30 2a
0000420 32 35 35 28 30 31 37 37 38 36 2e 33 37 31 35 2a
0000440 6b 57 68 29 0d 0a 31 2d 30 3a 32 2e 38 2e 30 2a
0000460 32 35 35 28 30 30 30 30 30 30 2e 30 30 30 30 2a
0000500 6b 57 68 29 0d 0a 31 2d 30 3a 30 2e 32 2e 30 2a
0000520 32 35 35 28 76 65 72 2e 30 33 2c 34 33 32 46 2c
0000540 32 30 31 37 30 35 30 34 29 0d 0a 31 2d 30 3a 39
0000560 36 2e 39 30 2e 32 2a 32 35 35 28 30 46 36 36 29
0000600 0d 0a 31 2d 30 3a 39 37 2e 39 37 2e 30 2a 32 35
0000620 35 28 30 30 30 30 30 30 30 30 29 0d 0a 21 0d 0a
0000640 89 ea ea d5 4c 4b 31 33 42 45 38 30 33 30 33 39
0000660 0d 0a 0d 0a 31 2d 30 3a 39 36 2e 31 2e 30 2a 32
0000700 35 35 28 30 30 31 4c 4f 47 30 30 36 35 33 31 38
0000720 37 34 32 29 0d 0a 31 2d 30 3a 31 2e 38 2e 30 2a
0000740 32 35 35 28 30 31 37 37 38 36 2e 33 37 31 37 2a
0000760 6b 57 68 29 0d 0a 31 2d 30 3a 32 2e 38 2e 30 2a
0001000 32 35 35 28 30 30 30 30 30 30 2e 30 30 30 30 2a
0001020 6b 57 68 29 0d 0a 31 2d 30 3a 30 2e 32 2e 30 2a
0001040 32 35 35 28 76 65 72 2e 30 33 2c 34 33 32 46 2c
0001060 32 30 31 37 30 35 30 34 29 0d 0a 31 2d 30 3a 39
0001100 36 2e 39 30 2e 32 2a 32 35 35 28 30 46 36 36 29
0001120 0d 0a 31 2d 30 3a 39 37 2e 39 37 2e 30 2a 32 35
0001140 35 28 30 30 30 30 30 30 30 30 29 0d 0a 21 0d 0a

tonishi

@homoran was meinst du mit Anzahl wakeup = 0? Kann damit grad nix anfangen

Homoran

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

um zu sehen ob überhaupt was ankommt.

hier kommt ja auch "was"
Aber ich hsb keine Ahnung ob im richtigen Format.

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

Hier ein Auszug von cat

Achtung Schnittstelle ggf. belegt

@tonishi sagte in Hichi IR Lesekopf verbindet sich nicht mit Smartmeter:

@homoran was meinst du mit Anzahl wakeup = 0? Kann damit grad nix anfangen

scheint zumindest nicht falsch zu sein. Hab ich in diversen Konfigurationen auch so gesehen

tonishi

hbe Anzahl wakeup mal frei gelassen:

log-file

2023-09-08 19:56:23.073  - [34mdebug[39m: smartmeter.0 (929) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-09-08 19:56:23.180  - [34mdebug[39m: smartmeter.0 (929) Objects client ready ... initialize now
2023-09-08 19:56:23.187  - [34mdebug[39m: smartmeter.0 (929) Objects create System PubSub Client
2023-09-08 19:56:23.190  - [34mdebug[39m: smartmeter.0 (929) Objects create User PubSub Client
2023-09-08 19:56:23.256  - [34mdebug[39m: smartmeter.0 (929) Objects client initialize lua scripts
2023-09-08 19:56:23.273  - [34mdebug[39m: smartmeter.0 (929) Objects connected to redis: 127.0.0.1:9001
2023-09-08 19:56:23.322  - [34mdebug[39m: smartmeter.0 (929) Redis States: Use Redis connection: 127.0.0.1:9000
2023-09-08 19:56:23.342  - [34mdebug[39m: smartmeter.0 (929) States create System PubSub Client
2023-09-08 19:56:23.344  - [34mdebug[39m: smartmeter.0 (929) States create User PubSub Client
2023-09-08 19:56:23.372  - [34mdebug[39m: smartmeter.0 (929) States connected to redis: 127.0.0.1:9000
2023-09-08 19:56:23.445  - [34mdebug[39m: smartmeter.0 (929) Plugin sentry Initialize Plugin (enabled=true)
2023-09-08 19:56:24.324  - [32minfo[39m: smartmeter.0 (929) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v18.17.1, js-controller: 4.0.24
2023-09-08 19:56:24.400  - [34mdebug[39m: smartmeter.0 (929) SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"6","anotherQueryDelay":"1000","transportSerialPort":"/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0019-if00-port0","transportSerialBaudrate":null,"transportSerialMessageTimeout":1000,"protocolD0WakeupCharacters":null,"obisFallbackMedium":1}
2023-09-08 19:56:24.407  - [34mdebug[39m: smartmeter.0 (929) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:56:24.427  - [34mdebug[39m: smartmeter.0 (929) SERIALPORT OPEN
2023-09-08 19:56:24.496  - [34mdebug[39m: smartmeter.0 (929) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:56:24.507  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (0 + NEW 25)
2023-09-08 19:56:24.515  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.517  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:9" -> null
2023-09-08 19:56:24.534  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (25 + NEW 15)
2023-09-08 19:56:24.537  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.541  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LO" -> null
2023-09-08 19:56:24.553  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (40 + NEW 22)
2023-09-08 19:56:24.555  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.557  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8." -> null
2023-09-08 19:56:24.570  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (62 + NEW 14)
2023-09-08 19:56:24.572  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.573  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6" -> null
2023-09-08 19:56:24.588  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (76 + NEW 15)
2023-09-08 19:56:24.591  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.593  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2" -> null
2023-09-08 19:56:24.599  - [34mdebug[39m: smartmeter.0 (929) connected set to false
2023-09-08 19:56:24.602  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (91 + NEW 18)
2023-09-08 19:56:24.605  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.606  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.00" -> null
2023-09-08 19:56:24.615  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (109 + NEW 12)
2023-09-08 19:56:24.617  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.618  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0" -> null
2023-09-08 19:56:24.626  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (121 + NEW 11)
2023-09-08 19:56:24.628  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.629  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(" -> null
2023-09-08 19:56:24.636  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (132 + NEW 10)
2023-09-08 19:56:24.638  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.641  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432" -> null
2023-09-08 19:56:24.648  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (142 + NEW 10)
2023-09-08 19:56:24.649  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.650  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504" -> null
2023-09-08 19:56:24.658  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (152 + NEW 9)
2023-09-08 19:56:24.659  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.660  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96" -> null
2023-09-08 19:56:24.669  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (161 + NEW 9)
2023-09-08 19:56:24.671  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.673  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255" -> null
2023-09-08 19:56:24.678  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (170 + NEW 12)
2023-09-08 19:56:24.680  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.700  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:" -> null
2023-09-08 19:56:24.709  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (182 + NEW 25)
2023-09-08 19:56:24.710  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.712  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r" -> null
2023-09-08 19:56:24.720  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (207 + NEW 1)
2023-09-08 19:56:24.722  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:24.723  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6298*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:56:25.498  - [34mdebug[39m: smartmeter.0 (929) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:56:25.500  - [34mdebug[39m: smartmeter.0 (929) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:56:25.503  - [33mwarn[39m: smartmeter.0 (929) No or too long answer from Serial Device after last request.
2023-09-08 19:56:25.504  - [34mdebug[39m: smartmeter.0 (929) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:56:25.505  - [34mdebug[39m: smartmeter.0 (929) Transport Reset!! Restart = true
2023-09-08 19:56:25.513  - [34mdebug[39m: smartmeter.0 (929) SERIALPORT CLOSE
2023-09-08 19:56:25.516  - [34mdebug[39m: smartmeter.0 (929) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:56:31.517  - [34mdebug[39m: smartmeter.0 (929) CREATE SERIALPORT: 9600 8 1 none
2023-09-08 19:56:31.524  - [34mdebug[39m: smartmeter.0 (929) SERIALPORT OPEN
2023-09-08 19:56:31.529  - [34mdebug[39m: smartmeter.0 (929) SET MESSAGE TIMEOUT TIMER: 1000
2023-09-08 19:56:31.587  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (0 + NEW 1)
2023-09-08 19:56:31.588  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.589  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "�" -> null
2023-09-08 19:56:31.593  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (1 + NEW 4)
2023-09-08 19:56:31.595  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.596  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b" -> null
2023-09-08 19:56:31.601  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (5 + NEW 6)
2023-09-08 19:56:31.603  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.604  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE8" -> null
2023-09-08 19:56:31.611  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (11 + NEW 9)
2023-09-08 19:56:31.612  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.614  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n" -> null
2023-09-08 19:56:31.620  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (20 + NEW 8)
2023-09-08 19:56:31.622  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.623  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1" -> null
2023-09-08 19:56:31.630  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (28 + NEW 9)
2023-09-08 19:56:31.631  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.632  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(00" -> null
2023-09-08 19:56:31.638  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (37 + NEW 8)
2023-09-08 19:56:31.640  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.641  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065" -> null
2023-09-08 19:56:31.647  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (45 + NEW 8)
2023-09-08 19:56:31.649  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.651  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r" -> null
2023-09-08 19:56:31.656  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (53 + NEW 8)
2023-09-08 19:56:31.658  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.659  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8" -> null
2023-09-08 19:56:31.665  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (61 + NEW 8)
2023-09-08 19:56:31.666  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.668  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(0" -> null
2023-09-08 19:56:31.674  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (69 + NEW 8)
2023-09-08 19:56:31.676  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.677  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.63" -> null
2023-09-08 19:56:31.683  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (77 + NEW 8)
2023-09-08 19:56:31.685  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.686  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r" -> null
2023-09-08 19:56:31.694  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (85 + NEW 10)
2023-09-08 19:56:31.695  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.696  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0" -> null
2023-09-08 19:56:31.702  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (95 + NEW 8)
2023-09-08 19:56:31.704  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.705  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000" -> null
2023-09-08 19:56:31.711  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (103 + NEW 9)
2023-09-08 19:56:31.713  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.714  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*" -> null
2023-09-08 19:56:31.720  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (112 + NEW 8)
2023-09-08 19:56:31.722  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.723  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-" -> null
2023-09-08 19:56:31.728  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (120 + NEW 7)
2023-09-08 19:56:31.730  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.731  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0" -> null
2023-09-08 19:56:31.738  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (127 + NEW 9)
2023-09-08 19:56:31.739  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.740  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver." -> null
2023-09-08 19:56:31.746  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (136 + NEW 8)
2023-09-08 19:56:31.748  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.749  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F," -> null
2023-09-08 19:56:31.755  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (144 + NEW 8)
2023-09-08 19:56:31.757  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.758  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504" -> null
2023-09-08 19:56:31.765  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (152 + NEW 10)
2023-09-08 19:56:31.767  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.768  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96." -> null
2023-09-08 19:56:31.774  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (162 + NEW 9)
2023-09-08 19:56:31.775  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.777  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(" -> null
2023-09-08 19:56:31.783  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (171 + NEW 7)
2023-09-08 19:56:31.784  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.786  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n" -> null
2023-09-08 19:56:31.791  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (178 + NEW 8)
2023-09-08 19:56:31.793  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.794  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.9" -> null
2023-09-08 19:56:31.800  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (186 + NEW 8)
2023-09-08 19:56:31.802  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.803  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(" -> null
2023-09-08 19:56:31.810  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (194 + NEW 9)
2023-09-08 19:56:31.811  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.813  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)" -> null
2023-09-08 19:56:31.819  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (203 + NEW 5)
2023-09-08 19:56:31.820  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:31.821  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n" -> null
2023-09-08 19:56:32.477  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (208 + NEW 1)
2023-09-08 19:56:32.479  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.480  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n�" -> null
2023-09-08 19:56:32.484  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (209 + NEW 4)
2023-09-08 19:56:32.485  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.487  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����L" -> null
2023-09-08 19:56:32.492  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (213 + NEW 6)
2023-09-08 19:56:32.494  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.495  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE8" -> null
2023-09-08 19:56:32.500  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (219 + NEW 7)
2023-09-08 19:56:32.502  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.504  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n" -> null
2023-09-08 19:56:32.510  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (226 + NEW 9)
2023-09-08 19:56:32.511  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.513  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96." -> null
2023-09-08 19:56:32.519  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (235 + NEW 8)
2023-09-08 19:56:32.520  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.522  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(" -> null
2023-09-08 19:56:32.528  - [34mdebug[39m: smartmeter.0 (929) ADD NEW DATA (243 + NEW 7)
2023-09-08 19:56:32.529  - [34mdebug[39m: smartmeter.0 (929) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-09-08 19:56:32.531  - [34mdebug[39m: smartmeter.0 (929) MATCH-RESULT SIGNON: "����b-�3BE803039\r\n\r\n1-0:96.1.0*255(001LOG0065318742)\r\n1-0:1.8.0*255(017786.6352*kWh)\r\n1-0:2.8.0*255(000000.0000*kWh)\r\n1-0:0.2.0*255(ver.03,432F,20170504)\r\n1-0:96.90.2*255(0F66)\r\n1-0:97.97.0*255(00000000)\r\n!\r\n����LK13BE803039\r\n\r\n1-0:96.1.0*255(001LOG0" -> null
2023-09-08 19:56:32.536  - [34mdebug[39m: smartmeter.0 (929) MESSAGE TIMEOUT TRIGGERED
2023-09-08 19:56:32.538  - [34mdebug[39m: smartmeter.0 (929) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:56:32.539  - [33mwarn[39m: smartmeter.0 (929) No or too long answer from Serial Device after last request.
2023-09-08 19:56:32.541  - [34mdebug[39m: smartmeter.0 (929) Error: No or too long answer from Serial Device after last request.
2023-09-08 19:56:32.542  - [34mdebug[39m: smartmeter.0 (929) Transport Reset!! Restart = true
2023-09-08 19:56:32.544  - [34mdebug[39m: smartmeter.0 (929) NEW DATA AFTER STOP ... ignore
2023-09-08 19:56:32.552  - [34mdebug[39m: smartmeter.0 (929) SERIALPORT CLOSE
2023-09-08 19:56:32.553  - [34mdebug[39m: smartmeter.0 (929) SCHEDULE NEXT RUN IN 6s
2023-09-08 19:56:36.085  - [32minfo[39m: smartmeter.0 (929) Got terminate signal TERMINATE_YOURSELF
2023-09-08 19:56:36.090  - [32minfo[39m: smartmeter.0 (929) terminating
2023-09-08 19:56:36.094  - [34mdebug[39m: smartmeter.0 (929) Plugin sentry destroyed
2023-09-08 19:56:36.096  - [32minfo[39m: smartmeter.0 (929) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

EDIT: In der smartmeter konfiguration steht, dass wenn Anzahl wakeup frei gelassen wird, dann wird dafür 0 eingesetzt.

Community Forum

NEWS

Hichi IR Lesekopf verbindet sich nicht mit Smartmeter

Support us

347

32.4k

81.4k

1.3m