Restore auf neuem Raspberry

TT-Tom

ich in der Influx Oberfläche das Bucket löschen und InfluxDB über den Service neu starten.

loverz

Wie starte ich den Service neu? Kann ich auch den ganzen Raspberry neu starten?

loverz

@meister-mopper den API Key (heißt jetzt Service Account) hab ich neu angelegt und verknüpft. Scheint nun weiter zu gehen, leider klappt der Restore weiterhin nicht:

Started restore ...
[DEBUG] [grafana] - Start Grafana Restore ...
[DEBUG] [grafana] - filename for restore: /opt/iobroker/backups/grafana_2023_07_16-03_32_13_Eck29_backupiobroker.tar.gz
[DEBUG] [grafana] - Grafana tmp directory created: /opt/iobroker/backups/grafana_tmp
[DEBUG] [grafana] - start decompress
[DEBUG] [grafana] - Grafana request started
[DEBUG] [grafana] - Grafana is available ... Status: 200
[DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/datasource/InfluxDB.json
[DEBUG] [grafana] - cannot restore datasource "InfluxDB": "data source with the same name already exists"
[DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/energieverbrauch.json
[DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/general-alerting.json
[DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/heizungsanlage.json
[DEBUG] [grafana] - Try to Restore: /opt/iobroker/backups/grafana_tmp/dashboards/wetterdaten.json
[DEBUG] [grafana] - dashboard restore for "wetterdaten" finish: {"id":1,"slug":"wetterdaten","status":"success","uid":"MyXZDlggk","url":"/d/MyXZDlggk/wetterdaten","version":3}
[DEBUG] [grafana] - dashboard restore for "general-alerting" finish: {"id":2,"slug":"general-alerting","status":"success","uid":"XflZZbZRz","url":"/d/XflZZbZRz/general-alerting","version":3}
[DEBUG] [grafana] - dashboard restore for "energieverbrauch" finish: {"id":4,"slug":"energieverbrauch","status":"success","uid":"QJpROlgRk","url":"/d/QJpROlgRk/energieverbrauch","version":3}
[DEBUG] [grafana] - dashboard restore for "heizungsanlage" finish: {"id":3,"slug":"heizungsanlage","status":"success","uid":"BJK6AugRk","url":"/d/BJK6AugRk/heizungsanlage","version":3}
[DEBUG] [grafana] - Grafana request ended
[DEBUG] [grafana] - Try deleting the Grafana tmp directory
[DEBUG] [grafana] - Grafana tmp directory was successfully deleted
[DEBUG] [grafana] - Grafana Restore completed successfully
[EXIT] Grafana restore done

TT-Tom

@loverz

nein die Oberfläche von der InfluxDB -> ip-influx-server:8086

loverz

@tt-tom gibts bei mir anscheinend nicht. Ich glaub ich habe Influx ohne Weboberfläche installiert.

Homoran

ich schieb das mal ins offTopic. hat ja mit iobroker selbst nichts zu tun.

TT-Tom

@loverz welche Version hast Du den installiert ??

loverz

Ich denke ich brauche hier allgemeine Hilfe.
Wenn sich jemand offenbaren möchte, bitte per PN melden, dann kann vlt. jemand mit mir gegen nen Kasten Bier auf den Bildschirm schauen.

Kann ja nicht so schwer sein ioBroker neu zu installieren und wieder zum laufen zu bekommen...

loverz

@tt-tom influxDB V1 nach dieser Anleitung:
https://rodnic.de/hausautomation/4-iobroker-influxdb-grafana/

Thomas Braun

@loverz

Die Anleitung dürfte für dein System falsch/veraltet sein.

iob diag

sagt?

Homoran

@loverz sagte in Restore auf neuem Raspberry:

Kann ja nicht so schwer sein ioBroker neu zu installieren

@homoran sagte in Restore auf neuem Raspberry:

hat ja mit iobroker selbst nichts zu tun.

loverz

@thomas-braun
======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 22:37:18 up  3:22,  1 user,  load average: 0.00, 0.01, 0.00
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=49.1'C
volt=0.8563V

*** Time and Time Zones ***
               Local time: Sun 2023-07-16 22:37:18 CEST
           Universal time: Sun 2023-07-16 20:37:18 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.8G        573M        913M        1.0M        362M        1.2G
Swap:            99M          0B         99M
Total:          1.9G        573M        1.0G

         1849 M total memory
          573 M used memory
          703 M active memory
          136 M inactive memory
          913 M free memory
           35 M buffer memory
          326 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G  3.6G  109G   4% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  1.1M  369M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Jul 16 19:14:48 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:43:7C:47 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=f60dec51-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Jul 16 19:14:49 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Jul 16 19:14:49 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sun Jul 16 19:14:51 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
608M    /var/
257M    /var/cache
251M    /var/cache/apt
160M    /var/lib
151M    /var/cache/apt/archives

Archived and active journals take up 88.0M in the file system.

/opt/iobroker/backups:
91M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
173M    /opt/iobroker/iobroker-data/
98M     /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
34M     /opt/iobroker/iobroker-data/files/javascript.admin/static
33M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
36M     /opt/iobroker/iobroker-data/objects.jsonl
9.5M    /opt/iobroker/iobroker-data/states.jsonl
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.312d98a8.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
5.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/44.59b48e42.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.1
/usr/bin/node           v18.16.1
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.1-deb-1nodesource1
  Candidate: 18.16.1-deb-1nodesource1
  Version table:
 *** 18.16.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : Eck29-ioBroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : Eck29-ioBroker                           - disabled
+ system.adapter.backitup.0               : backitup              : Eck29-ioBroker                           -  enabled
  system.adapter.daswetter.0              : daswetter             : Eck29-ioBroker                           - disabled
  system.adapter.deconz.0                 : deconz                : Eck29-ioBroker                           - disabled, port: 80
  system.adapter.easee.0                  : easee                 : Eck29-ioBroker                           - disabled
  system.adapter.ems-esp.0                : ems-esp               : Eck29-ioBroker                           - disabled
  system.adapter.hmip.0                   : hmip                  : Eck29-ioBroker                           - disabled
  system.adapter.hs100.0                  : hs100                 : Eck29-ioBroker                           - disabled
  system.adapter.hue.0                    : hue                   : Eck29-ioBroker                           - disabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : Eck29-ioBroker                           -  enabled, port: 8086
  system.adapter.info.0                   : info                  : Eck29-ioBroker                           - disabled
  system.adapter.javascript.0             : javascript            : Eck29-ioBroker                           - disabled
  system.adapter.km200.0                  : km200                 : Eck29-ioBroker                           - disabled
  system.adapter.knx.0                    : knx                   : Eck29-ioBroker                           - disabled, bind: 192.168.1.166
  system.adapter.mydlink.0                : mydlink               : Eck29-ioBroker                           - disabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : Eck29-ioBroker                           - disabled
  system.adapter.philips-tv.0             : philips-tv            : Eck29-ioBroker                           - disabled
  system.adapter.ping.0                   : ping                  : Eck29-ioBroker                           - disabled
  system.adapter.rpi2.0                   : rpi2                  : Eck29-ioBroker                           - disabled
  system.adapter.shelly.0                 : shelly                : Eck29-ioBroker                           - disabled, port: 1882, bind: 192.168.1.166
  system.adapter.solarmanpv.0             : solarmanpv            : Eck29-ioBroker                           - disabled
  system.adapter.telegram.0               : telegram              : Eck29-ioBroker                           - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : Eck29-ioBroker                           - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.yahka.0                  : yahka                 : Eck29-ioBroker                           - disabled
  system.adapter.yahka.3                  : yahka                 : Eck29-ioBroker                           - disabled
  system.adapter.yeelight-2.0             : yeelight-2            : Eck29-ioBroker                           - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Eck29-ioBroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : Eck29-ioBroker                           -  enabled, port: 8086

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json
latest        : http://iobroker.live/repo/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "deconz"       : 1.3.21   , installed 1.3.21
Adapter    "easee"        : 1.0.7    , installed 1.0.7
Adapter    "ems-esp"      : 1.30.0   , installed 1.30.0
Adapter    "hmip"         : 1.20.0   , installed 1.20.0
Adapter    "hs100"        : 2.1.2    , installed 2.1.2
Adapter    "hue"          : 3.9.3    , installed 3.9.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "km200"        : 2.0.3    , installed 2.0.3
Adapter    "knx"          : 2.0.17   , installed 2.0.18
Adapter    "mydlink"      : 1.3.1    , installed 1.3.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "philips-tv"   : 0.5.3    , installed 0.5.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "solarmanpv"   : 0.5.0    , installed 0.5.0
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "yahka"        : 0.17.0   , installed 1.0.3
Adapter    "yeelight-2"   : 1.2.1    , installed 1.2.1

Objects and States
Please stand by - This may take a while
Objects:        10835
States:         8894

*** OS-Repositories and Updates ***
W: GPG error: https://repos.influxdata.com/debian stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian stretch InRelease' is not signed.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1976       520/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       11831      483/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       13090      483/iobroker.js-con
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      110        14143      482/influxd
tcp6       0      0 :::3000                 :::*                    LISTEN      111        17439      1086/grafana
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       11971      718/io.admin.0
tcp6       0      0 :::8086                 :::*                    LISTEN      110        13070      482/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1978       520/sshd: /usr/sbin
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13075      1085/dhcpcd
udp        0      0 0.0.0.0:33986           0.0.0.0:*                           108        12956      365/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12954      365/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        12955      365/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15989      1085/dhcpcd
udp6       0      0 :::33322                :::*                                108        12957      365/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-07-16 19:15:01.139  - info: admin.0 (718) Repository received successfully.
2023-07-16 19:15:04.078  - info: backitup.0 (849) starting. Version 2.6.23 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.16.1, js-controller: 4.0.24
2023-07-16 19:15:04.231  - info: backitup.0 (849) [iobroker] backup will be activated at 03:30 every 1 day(s)
2023-07-16 19:15:06.143  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:15:07.139  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:15:29.199  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:15:29.219  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:15:30.195  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin
2023-07-16 19:15:30.241  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:17:19.238  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:17:25.259  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin
2023-07-16 19:17:29.372  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:17:30.353  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 19:19:32.882  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin
2023-07-16 19:19:32.887  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:19:27.316  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:19:27.344  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:20:27.788  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:20:27.800  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin
2023-07-16 20:20:27.931  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:20:27.958  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 20:21:27.915  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152 admin
2023-07-16 20:21:27.924  - info: admin.0 (718) <== Disconnect system.user.admin from ::ffff:192.168.1.152
2023-07-16 22:36:18.904  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152
2023-07-16 22:36:18.967  - info: admin.0 (718) ==> Connected system.user.admin from ::ffff:192.168.1.152

============ Mark until here for C&P =============

Thomas Braun

@loverz

Wie vermutet. Das influx-Repo ist für 'stretch' angelegt, du fährst aber 'bullseye'. Und der key ist auch nicht richtig. Man buddelt auch keine mehrere Jahre alten Anleitungen aus dem Netz.

loverz

@thomas-braun okay, dann installiere ich alles nochmal neu und versuche eine neue Anleitung zu finden. Würde am liebsten gerne direkt influxDB v2 verwenden, aber das macht es wahrscheinlich noch komplexer.

Ist bei Grafana das gleiche Problem vorhanden, oder wieso stellt er die nicht wieder her? Oder meintest du dass der Grafana Key falsch ist?

Thomas Braun

@loverz

Mach es so:

sudo rm /etc/apt/sources.list.d/infl*
wget -q https://repos.influxdata.com/influxdata-archive_compat.key

echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null

echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list

rm influxdata-archive_compat.key

sudo apt update
apt policy influx*

loverz

@thomas-braun also komplett neu installieren und dann das hier ausführen?Danach dann den Restore von Backitup?

Thomas Braun

@loverz sagte in Restore auf neuem Raspberry:

also komplett neu installieren

Wer sagt denn das? Du sollst nur das falsche Repo da aus dem System kratzen.

loverz

@thomas-braun weil du meintest dass ich keine alten Anleitungen nutzen soll. Dachte das ist nun der aktuelle Befehl um Influx zu installieren.

Ich hab nun die Befehle von dir ausgeführt und danach nochmal des Restore probiert. Leider klappt es weiterhin nicht.

Diese Kommandozeile-Zeugs liegt mir einfach nicht. Ich hab da 0 Ahnung leider.

Hast du vielleicht die Tage mal Zeit mit mir zusammen den neuen Raspberry einzurichten? Am besten per Bildschirmfreigabe?

Ich brauche eigentlich nur einen neuen Raspberry mit:
-ioBroker
-InfluxDB (vielleicht gleich v2)
-Grafana

und die Datensicherungen davon.

Optional dann:
-Phoscon
-Homebridge

ebenfalls mit Datensicherungen.

Thomas Braun

@loverz sagte in Restore auf neuem Raspberry:

Am besten per Bildschirmfreigabe?

Nein. Und schon gar nicht per Remote Desktop.

Was sagt denn nun

sudo apt update

loverz

@thomas-braun

Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Get:3 http://security.debian.org/debian-security bullseye-security InRelease [48.4 kB]
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:6 https://packages.grafana.com/oss/deb stable InRelease
Hit:7 https://repos.influxdata.com/debian stable InRelease
Fetched 48.4 kB in 2s (24.0 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
pi@Eck29-ioBroker:~ $

Community Forum

NEWS

Restore auf neuem Raspberry

Support us

898

32.6k

82.0k

1.3m