Weihnachtsangebot 2025! 🎄

[shellyrulestheworld]

Kann mir jemand einen Hinweis geben?

Debian 11 unter Proxmox im LXC Container. Der "Fehler" taucht regelmäßig im Log aus, alle 10 min ungefähr

host.iobroker
2023-06-28 18:26:15.096	error	instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at /opt/iobroker/node_modules/iobroker.zigbee/main.js:699:22
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at Zigbee.filterError (/opt/iobroker/node_modules/iobroker.zigbee/main.js:142:18)
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at Zigbee.sendError (/opt/iobroker/node_modules/iobroker.zigbee/main.js:118:32)
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at Object.configureScope (/opt/iobroker/node_modules/@sentry/src/exports.ts:76:1)
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at Hub.configureScope (/opt/iobroker/node_modules/@sentry/src/hub.ts:340:1)
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: at /opt/iobroker/node_modules/iobroker.zigbee/main.js:122:56
host.iobroker
2023-06-28 18:26:15.096	error	Caught by controller[0]: TypeError: Cannot read properties of undefined (reading 'Error')
host.iobroker
2023-06-28 18:26:15.095	error	Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:

zigbee.0
2023-06-28 18:26:14.541	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

zigbee.0
2023-06-28 18:26:14.540	info	terminating

zigbee.0
2023-06-28 18:26:14.430	info	Zigbee: disabling joining new devices.

zigbee.0
2023-06-28 18:26:14.388	info	cleaned everything up...

zigbee.0
2023-06-28 18:26:14.375	error	Cannot read properties of undefined (reading 'Error')

zigbee.0
2023-06-28 18:26:14.375	error	TypeError: Cannot read properties of undefined (reading 'Error') at /opt/iobroker/node_modules/iobroker.zigbee/main.js:122:56 at Hub.configureScope (/opt/iobroker/node_modules/@sentry/src/hub.ts:340:1) at Object.configureScope (/opt/iobroker/node_modules/@sentry/src/exports.ts:76:1) at Zigbee.sendError (/opt/iobroker/node_modules/iobroker.zigbee/main.js:118:32) at Zigbee.filterError (/opt/iobroker/node_modules/iobroker.zigbee/main.js:142:18) at /opt/iobroker/node_modules/iobroker.zigbee/main.js:699:22

zigbee.0
2023-06-28 18:26:14.350	error	unhandled promise rejection: Cannot read properties of undefined (reading 'Error')

zigbee.0
2023-06-28 18:26:14.350	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

zigbee.0
2023-06-28 18:26:14.349	error	Send command to 0x9035eafffee1c47c failed with no error code (no response received)

[Thomas Braun]

@shellyrulestheworld

Beta-testest du js-controller5?

Dann dürfte dir nicht entgangen sein, dass es ein bekannter Fehler ist.
Schalt Sentry für den Adapter mal temporär aus.

[shellyrulestheworld]

@thomas-braun vielen Dank für deine Antwort. Ich habe vor ein paar Tagen den iob neu aufgesetzt und die Backups eingespielt. Ich habe den jscontroller nicht auf Beta umgestellt. Wie kann ich die Version prüfen?

[Thomas Braun]

@shellyrulestheworld

Steht neben anderen interessanten Dingen in

iob diag 

drin.

[shellyrulestheworld]

@thomas-braun Danke.

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : false
Virtualization  : lxc
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 20:20:13 up  2:01,  1 user,  load average: 1.06, 0.89, 0.91
CPU threads: 4


*** Time and Time Zones ***
               Local time: Wed 2023-06-28 20:20:13 CEST
           Universal time: Wed 2023-06-28 18:20:13 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** User and Groups ***
root
/root
root

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal: 
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.1G        2.3G        1.4G        0.0K        325M        1.7G
Swap:           512M          0B        512M
Total:          4.6G        2.3G        1.9G

         4096 M total memory
         2347 M used memory
          141 M active memory
         2387 M inactive memory
         1423 M free memory
            0 M buffer memory
          325 M swap cache
          512 M total swap
            0 M used swap
          512 M free swap

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--203--disk--0 ext4      7.8G  3.6G  3.9G  49% /
none                             tmpfs     492K  4.0K  488K   1% /dev
/dev/mapper/pve-root             ext4       94G  9.3G   80G  11% /dev/ttyACM0
udev                             devtmpfs  7.7G     0  7.7G   0% /dev/tty
tmpfs                            tmpfs     7.7G     0  7.7G   0% /dev/shm
tmpfs                            tmpfs     3.1G  104K  3.1G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems (real ones only):
TARGET         SOURCE                                                 FSTYPE OPTIONS
/              /dev/mapper/pve-vm--203--disk--0                       ext4   rw,relatime,stripe=16
`-/dev/ttyACM0 /dev/mapper/pve-root[/var/lib/lxc/203/devices/ttyACM0] ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
392M    /var/
229M    /var/cache
223M    /var/cache/apt
155M    /var/cache/apt/archives
144M    /var/lib

Archived and active journals take up 16.0M in the file system.

/opt/iobroker/backups:
129M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
418M    /opt/iobroker/iobroker-data/
290M    /opt/iobroker/iobroker-data/files
85M     /opt/iobroker/iobroker-data/backup-objects
52M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
21M     /opt/iobroker/iobroker-data/states.jsonl
21M     /opt/iobroker/iobroker-data/objects.jsonl
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map
18M     /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.274a4d8d.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.1
/usr/bin/node           v18.16.1
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.1-deb-1nodesource1
  Candidate: 18.16.1-deb-1nodesource1
  Version table:
 *** 18.16.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://ftp.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.0.3

Adapters from github:   1

Adapter State
+ system.adapter.admin.1                  : admin                 : iobroker                                 -  enabled, port: 8089, bind: 0.0.0.0, run as: admin
  system.adapter.alarm.0                  : alarm                 : iobroker                                 - disabled
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.cloud.0                  : cloud                 : iobroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 - disabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : iobroker                                 -  enabled
+ system.adapter.fronius.0                : fronius               : iobroker                                 -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.heizoel.0                : heizoel               : iobroker                                 -  enabled
  system.adapter.history.0                : history               : iobroker                                 - disabled
+ system.adapter.homeconnect.0            : homeconnect           : iobroker                                 -  enabled
+ system.adapter.hs100.0                  : hs100                 : iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
  system.adapter.ical.1                   : ical                  : iobroker                                 -  enabled
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.jarvis.0                 : jarvis                : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.net-tools.0              : net-tools             : iobroker                                 - disabled
  system.adapter.philips-air.0            : philips-air           : iobroker                                 - disabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : iobroker                                 -  enabled
+ system.adapter.proxmox.0                : proxmox               : iobroker                                 -  enabled, port: 8006
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.smartthings.0            : smartthings           : iobroker                                 - disabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker                                 -  enabled
+ system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : iobroker                                 -  enabled
+ system.adapter.upnp.0                   : upnp                  : iobroker                                 -  enabled
  system.adapter.uv-protect.0             : uv-protect            : iobroker                                 -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : iobroker                                 -  enabled, port: 8089, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.proxmox.0                : proxmox               : iobroker                                 -  enabled, port: 8006
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alarm"        : 3.3.11   , installed 3.3.11
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.2.6  [Updatable]
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "heizoel"      : 1.0.3    , installed 1.0.3
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "hs100"        : 2.1.2    , installed 2.1.2
Adapter    "ical"         : 1.13.3   , installed 1.13.2 [Updatable]
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "philips-air"  : 1.0.3    , installed 1.0.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "proxmox"      : 1.3.5    , installed 1.3.4  [Updatable]
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartthings"  : 0.0.4    , installed 0.0.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "synology"     : 2.1.13   , installed 2.1.13
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "text2command" : 3.0.2    , installed 3.0.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "uv-protect"   : 0.4.0    , installed 0.4.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

[Thomas Braun]

@shellyrulestheworld

Zunächst: Hampel nicht als root durch den Container.
Leg dir einen user dafür an.

Zieh die drei Adapter auf einen aktuellen Stand.

Ansonsten soweit okay, schalt sentry für den Adapter aus. Geht glaube ich nur im Experten-Modus.

[shellyrulestheworld]

@thomas-braun herzlichen Dank für deine Hilfe

[Rolf_A]

@shellyrulestheworld Entschuldige meine "doofe" Frage, wo finde ich die Einstellung sentry?

[crunchip]

@rolf_a system.adapter.zigbee.0.plugins.sentry

[Xsev]

@rolf_a Du kannst es auch im Admin unter Instanzen (Expertenansicht aktiv!!) auf der rechten Seite (grünes Symbol) für den jeweiligen Adapter deaktivieren.

[Rolf_A]

@xsev uund @crunchip habe es gefunden. Vielen Dank. Nur Leider startet der Adapter im Minutentakt immer wieder neu. Hat er bis ich in "udev-Falle" getappt bin meiner Meinung nach nicht gemacht. Zigbee funktioniert soweit aber.

[crunchip]

@rolf_a was ist 0x9035eafffee1c47c für ein Gerät?

[Rolf_A]

@crunchip Oh, jetzt steh ich auf dem Schlauch. Ich versteh die Frage nicht. Ich hab doch keine Geräte ins Spiel gebracht? Oder ist das ein Test? Bin Leider ein Silberrücken der sich die Dinge nur anließt und deshalb manchmal aus dem "Mus-Topf" kommt.

[crunchip]

@rolf_a sorry, hatte ich oben verwechselt, hatte nicht auf den user geachtet

@rolf_a sagte in Zigbee Adapter Fehlermeldungen:

Nur Leider startet der Adapter im Minutentakt immer wieder neu

Logmeldung

[Rolf_A]

zigbee.0
	2023-06-30 15:39:04.277	info	Zigbee started
zigbee.0
	2023-06-30 15:39:04.277	info	0x00124b000c9d2126 (addr 15856): CC2530.ROUTER - Custom devices (DiY) [CC2530 router](http://ptvo.info/cc2530-based-zigbee-coordinator-and-router-112/) (Router)
zigbee.0
	2023-06-30 15:39:04.277	info	0x00158d000895981f (addr 17956): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
zigbee.0
	2023-06-30 15:39:04.276	info	0x00158d0008ce65bc (addr 32859): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
zigbee.0
	2023-06-30 15:39:04.276	info	0xa4c13884fc8a572b (addr 52850): TS0601_human_presence_sensor - TuYa Human presence sensor Zigbee (Router)
zigbee.0
	2023-06-30 15:39:04.275	info	0xa4c138f48de4d9e4 (addr 49435): TS0601_human_presence_sensor - TuYa Human presence sensor Zigbee (Router)
zigbee.0
	2023-06-30 15:39:04.275	info	0x00158d0008913fdd (addr 17754): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
zigbee.0
	2023-06-30 15:39:04.274	info	0xa4c1387775e9933e (addr 48189): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
zigbee.0
	2023-06-30 15:39:04.274	info	0xa4c138e286d3f8fc (addr 23116): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
zigbee.0
	2023-06-30 15:39:04.267	info	Currently 8 devices are joined:
zigbee.0
	2023-06-30 15:39:04.221	info	--> transmitPower : high
zigbee.0
	2023-06-30 15:39:04.216	info	Unable to disable LED, unsupported function.
zigbee.0
	2023-06-30 15:39:04.211	info	Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}}
zigbee.0
	2023-06-30 15:39:03.661	info	Installed Version: iobroker.zigbee@1.8.10
zigbee.0
	2023-06-30 15:39:03.456	info	Starting Zigbee npm ...
zigbee.0
	2023-06-30 15:39:03.455	info	delete old Backup files. keep only last 10
zigbee.0
	2023-06-30 15:39:03.371	info	starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.16.1, js-controller: 4.0.24
host.iobroker
	2023-06-30 15:39:02.086	info	instance system.adapter.zigbee.0 started with pid 1949548
host.iobroker
	2023-06-30 15:39:01.048	info	Restart adapter system.adapter.zigbee.0 because enabled
host.iobroker
	2023-06-30 15:39:01.047	info	instance system.adapter.zigbee.0 scheduled normal terminated and will be restarted on schedule.
hm-rega.0
	2023-06-30 15:39:00.731	info	pollingTrigger
zigbee.0
	2023-06-30 15:39:00.508	info	Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
zigbee.0
	2023-06-30 15:39:00.507	info	terminating
zigbee.0
	2023-06-30 15:39:00.015	info	Zigbee: disabling joining new devices.
zigbee.0
	2023-06-30 15:39:00.005	info	cleaned everything up...
zigbee.0
	2023-06-30 15:39:00.005	info	Scheduled restart.
hm-rega.0
	2023-06-30 15:38:52.115	info	pollingTrigger
zigbee.0
	2023-06-30 15:38:04.147	info	Zigbee started
zigbee.0
	2023-06-30 15:38:04.146	info	0x00124b000c9d2126 (addr 15856): CC2530.ROUTER - Custom devices (DiY) [CC2530 router](http://ptvo.info/cc2530-based-zigbee-coordinator-and-router-112/) (Router)
zigbee.0
	2023-06-30 15:38:04.146	info	0x00158d000895981f (addr 17956): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice)
zigbee.0
	2023-06-30 15:38:04.146	info	0x00158d0008ce65bc (addr 32859): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
zigbee.0
	2023-06-30 15:38:04.145	info	0xa4c13884fc8a572b (addr 52850): TS0601_human_presence_sensor - TuYa Human presence sensor Zigbee (Router)
zigbee.0
	2023-06-30 15:38:04.145	info	0xa4c138f48de4d9e4 (addr 49435): TS0601_human_presence_sensor - TuYa Human presence sensor Zigbee (Router)
zigbee.0
	2023-06-30 15:38:04.144	info	0x00158d0008913fdd (addr 17754): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice)
zigbee.0
	2023-06-30 15:38:04.144	info	0xa4c1387775e9933e (addr 48189): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
zigbee.0
	2023-06-30 15:38:04.143	info	0xa4c138e286d3f8fc (addr 23116): TS011F_plug_1 - TuYa Smart plug (with power monitoring) (Router)
zigbee.0
	2023-06-30 15:38:04.137	info	Currently 8 devices are joined:
zigbee.0
	2023-06-30 15:38:04.133	info	--> transmitPower : high
zigbee.0
	2023-06-30 15:38:04.128	info	Unable to disable LED, unsupported function.
zigbee.0
	2023-06-30 15:38:04.122	info	Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}}
zigbee.0
	2023-06-30 15:38:03.555	info	Installed Version: iobroker.zigbee@1.8.10
zigbee.0
	2023-06-30 15:38:03.375	info	Starting Zigbee npm ...
zigbee.0
	2023-06-30 15:38:03.374	info	delete old Backup files. keep only last 10
zigbee.0
	2023-06-30 15:38:03.306	info	starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.16.1, js-controller: 4.0.24
host.iobroker
	2023-06-30 15:38:02.084	info	instance system.adapter.zigbee.0 started with pid 1948417
host.iobroker
	2023-06-30 15:38:01.051	info	Restart adapter system.adapter.zigbee.0 because enabled
host.iobroker
	2023-06-30 15:38:01.051	info	instance system.adapter.zigbee.0 scheduled normal terminated and will be restarted on schedule.
zigbee.0
	2023-06-30 15:38:00.510	info	Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
zigbee.0
	2023-06-30 15:38:00.510	info	terminating
zigbee.0
	2023-06-30 15:38:00.015	info	Zigbee: disabling joining new devices.
zigbee.0
	2023-06-30 15:38:00.008	info	cleaned everything up...
zigbee.0
	2023-06-30 15:38:00.007	info	Scheduled restart.
hm-rega.0
	2023-06-30 15:37:52.116	info	pollingTrigger

[crunchip]

@rolf_a sagte in Zigbee Adapter Fehlermeldungen:

Scheduled restart.

hast du da vllt. versehentlich etwas eingestellt?

[Rolf_A]

@crunchip Danke, das wars! Stand auf einer Minute. Ich streu Asche über mein Haupt. Ja, der DAU sitzt immer vorm Bildschirm! Wie ich es gemacht habe weiß ich leider nicht.
Vielen Dank!

Gruß Rolf