Funktioniert jetzt auch, wie ich vermutet habe, habe ich immer die falsche settings.js bearbeitet.
Sorry das ich mich auf meinem eigenen System nicht auskenne wo, was, wie zu finden ist.

Danke für die Hilfe!!

@mickym Spitze, danke!

Zu meinem Verständnis, du setzt die msg.payload auf msg.overallStatus und mit json wird payload und slat verglichen und zu "normalen" Filter Node weitergeleitet.

Lg

@mickym
Ich hab das jetzt mal für mich angepasst - glaub ich.
Jetzt wird die Nachricht nur durchgereicht wenn payload und slat anders sind als zuvor, jedoch müsste nicht wenn man zwei mal den gleichen payload sendet beim Ausgang/Debug "paylaod gleich (wahr)" die Nachricht erscheinen.

[{"id":"8dd77fc4b1875654","type":"tab","label":"Test","disabled":false,"info":"","env":[]},{"id":"d4e5d14fe4b0f7a0","type":"blind-control","z":"8dd77fc4b1875654","name":"Fenster","topic":"","addIdType":"none","addId":"","positionConfig":"d836509a.67bc4","autoTrigger":true,"autoTriggerTime":"900000","startDelayTime":10000,"contextStore":"","results":[{"p":"","pt":"msgTopic","v":"","vt":"topic"},{"p":"","pt":"msgPayload","v":"","vt":"level"},{"p":"slat","pt":"msg","v":"","vt":"slat"},{"p":"blindCtrl","pt":"msg","v":"","vt":"ctrlObj"}],"blindIncrement":"25","blindOpenPos":"0","blindClosedPos":"100","blindPosReverse":false,"blindPosDefault":"open (max)","blindPosDefaultType":"levelFixed","slatPosDefault":"","slatPosDefaultType":"none","overwriteExpire":"10800000","rules":[],"sunControlMode":"16","sunFloorLengthType":"num","sunFloorLength":"50","sunMinDelta":"","blindPosMin":"closed (min)","blindPosMinType":"levelFixed","blindPosMax":"open (max)","blindPosMaxType":"levelFixed","blindOpenPosOffset":"","blindClosedPosOffset":"","sunSlat":"25","sunSlatType":"num","smoothTime":"3600000","sunTopic":"","windowTopType":"num","windowTop":"225","windowBottomType":"num","windowBottom":"0","windowAzimuthStartType":"numAzimuth","windowAzimuthStart":"135","windowAzimuthEndType":"numAzimuth","windowAzimuthEnd":"260","oversteers":[],"oversteerTopic":"","x":680,"y":440,"wires":[["8bf6496d13006282"],[]]},{"id":"8a7e64e1c145bd1e","type":"change","z":"8dd77fc4b1875654","name":"p100 / s 25","rules":[{"t":"set","p":"payload","pt":"msg","to":"100","tot":"num"},{"t":"set","p":"slat","pt":"msg","to":"25","tot":"num"},{"t":"set","p":"topic","pt":"msg","to":"levelOverwrite","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":390,"y":420,"wires":[["d4e5d14fe4b0f7a0"]]},{"id":"5f444d118f024a4d","type":"inject","z":"8dd77fc4b1875654","name":"","props":[{"p":"payload"},{"p":"topic","vt":"str"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"","payloadType":"date","x":180,"y":420,"wires":[["8a7e64e1c145bd1e"]]},{"id":"967c64ba19640b7a","type":"debug","z":"8dd77fc4b1875654","name":"payload unterschiedlich (falsch)","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":1170,"y":420,"wires":[]},{"id":"8bf6496d13006282","type":"switch","z":"8dd77fc4b1875654","name":"Filter","property":"(payload = payload) and (payload.slat = payload.slat)","propertyType":"jsonata","rules":[{"t":"false"},{"t":"true"}],"checkall":"true","repair":false,"outputs":2,"x":870,"y":440,"wires":[["967c64ba19640b7a"],["cc572d62703e09a2"]]},{"id":"cc572d62703e09a2","type":"debug","z":"8dd77fc4b1875654","name":"payload gleich (wahr)","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":1140,"y":460,"wires":[]},{"id":"744f4975df73b6c1","type":"change","z":"8dd77fc4b1875654","name":"p 100 / s 35","rules":[{"t":"set","p":"payload","pt":"msg","to":"100","tot":"num"},{"t":"set","p":"slat","pt":"msg","to":"35","tot":"num"},{"t":"set","p":"topic","pt":"msg","to":"levelOverwrite","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":390,"y":460,"wires":[["d4e5d14fe4b0f7a0"]]},{"id":"a4408b97151be03d","type":"inject","z":"8dd77fc4b1875654","name":"","props":[{"p":"payload"},{"p":"topic","vt":"str"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"","payloadType":"date","x":180,"y":460,"wires":[["744f4975df73b6c1"]]},{"id":"e57b23aeec869881","type":"time-inject","z":"8dd77fc4b1875654","name":"Auto reset all overwrite","nameInt":"⏲ 07:45↷ = undefined=undefined","positionConfig":"d836509a.67bc4","props":[{"p":"","pt":"msgTopic","v":"resetOverwrite","vt":"str","o":"","oT":"none","oM":"60000","f":0,"fS":0,"fT":"Millisekunden UNIX-Zeit","fI":"0","next":false,"days":"*","months":"*","onlyOddDays":false,"onlyEvenDays":false,"onlyOddWeeks":false,"onlyEvenWeeks":false}],"injectTypeSelect":"time","intervalCount":"2","intervalCountType":"num","intervalCountMultiplier":60000,"time":"07:45","timeType":"entered","offset":"16","offsetType":"num","offsetMultiplier":60000,"timeEnd":"sunriseStart","timeEndType":"pdsTime","timeEndOffset":"-5","timeEndOffsetType":"num","timeEndOffsetMultiplier":60000,"timeDays":"*","timeOnlyOddDays":false,"timeOnlyEvenDays":false,"timeOnlyOddWeeks":false,"timeOnlyEvenWeeks":false,"timeMonths":"*","timedatestart":"","timedateend":"","property":"","propertyType":"none","propertyCompare":"true","propertyThreshold":"","propertyThresholdType":"num","timeAlt":"","timeAltType":"entered","timeAltDays":"*","timeAltOnlyOddDays":false,"timeAltOnlyEvenDays":false,"timeAltOnlyOddWeeks":false,"timeAltOnlyEvenWeeks":false,"timeAltMonths":"*","timeAltOffset":0,"timeAltOffsetType":"none","timeAltOffsetMultiplier":60000,"once":false,"onceDelay":"","recalcTime":2,"x":220,"y":140,"wires":[["d4e5d14fe4b0f7a0"]]},{"id":"d836509a.67bc4","type":"position-config","name":"Johnsdorf/Brunn","isValide":"true","angleType":"deg","timeZoneOffset":"99","timeZoneDST":"0","stateTimeFormat":"3","stateDateFormat":"3","contextStore":""}]

Ich hab nur leider die node-red-contrib-sun-position Rolladen Knoten mit drin den du nicht haben wirst. Weiß nicht wie ich das sonst zeigen sollte.
Lg

Leider nicht zu Hause sonst würde ich das gleich mal ausprobieren.
Glaube aber das das so nicht funktioniert oder ich verstehe es nicht richtig was noch wahrscheinlicher ist

Es geht um eine Jalousie - ich bekomme vom Knoten die msg.payload (irgendwas zw. 0-100) und die msg.paylaoad.slat (irgendwas zw. 0-100)

Wenn der Knoten in eine andere Zeitschaltung spring und dabei die msg.payload und msg.paylaod.slat gleich wie zuvor ist soll der payload gefiltert werden - sonst durchlaufen.

Is schwer zu erklären, gebe mein bestes.
Lg

Hallo,
wie schaffe ich es 2 Werte aus einer Nachricht (z.B. msg.payload und msg.payload.irgendwas) zu filtern.
Also es soll nur der payload weitergegeben werden, wenn einer der beiden Werte sich geändert hat, beide Werte gleich dann nichts ausgeben?

Wie macht man sowas?

Lg

Vielen lieben Dank, habe den ersten Vorschlag von @mickym übernommen.

Danke dafür!

Hallo,
ich habe wieder mal ein Problem das ich nicht zufriedenstellend gelöst bekomme.
Ich habe 2 Sensoren (Reed Kontakte) die jeweils auf true/false stehen können. (Haustür mit Magnetrigelkontakt.

Also überwacht soll werden:
flase/false = grün (geschlossen/versperrt)
false/true= blau (geschlossen/unversperrt)
true/true=rot (Tür offen)

Ich hab das mit 2 „Und“ Logiken und einer „Oder“ Logik gelöst – funktioniert manchmal, dann wider nicht.

Gibt es Verbesserungsideen von euch, würde mich freuen.

[{"id":"8e615e82aa5ca254","type":"tab","label":"Haustür","disabled":false,"info":"","env":[]},{"id":"ad7939c8d22deaea","type":"change","z":"8e615e82aa5ca254","name":"","rules":[{"t":"set","p":"reedhaustür","pt":"global","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":370,"y":260,"wires":[["68dcff3e62ef05ec"]]},{"id":"3cd5c40777d49795","type":"change","z":"8e615e82aa5ca254","name":"","rules":[{"t":"set","p":"reedhaustürriegel","pt":"global","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":380,"y":340,"wires":[["58f8660753130e04"]]},{"id":"68dcff3e62ef05ec","type":"switch","z":"8e615e82aa5ca254","name":"true/false","property":"payload","propertyType":"msg","rules":[{"t":"true"},{"t":"false"}],"checkall":"true","repair":false,"outputs":2,"x":600,"y":260,"wires":[["4250163706cf6bf1","a5ef65919e1aed47","1d2886b634a17e5f"],["1d2886b634a17e5f","a5ef65919e1aed47","4250163706cf6bf1"]]},{"id":"58f8660753130e04","type":"switch","z":"8e615e82aa5ca254","name":"true/false","property":"payload","propertyType":"msg","rules":[{"t":"true"},{"t":"false"}],"checkall":"true","repair":false,"outputs":2,"x":600,"y":340,"wires":[["4250163706cf6bf1","a5ef65919e1aed47","1d2886b634a17e5f"],["1d2886b634a17e5f","a5ef65919e1aed47"]]},{"id":"b3b0ead5139656c3","type":"change","z":"8e615e82aa5ca254","name":"Riegeloffen/Türzu","rules":[{"t":"set","p":"payload","pt":"msg","to":"1","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":1090,"y":300,"wires":[["90c542ed7594a35b"]]},{"id":"18842d1812434ed6","type":"change","z":"8e615e82aa5ca254","name":"Riegelzu/Türzu","rules":[{"t":"set","p":"payload","pt":"msg","to":"0","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":1080,"y":200,"wires":[["85d7420709df1104"]]},{"id":"948686596bf18ec7","type":"change","z":"8e615e82aa5ca254","name":"Riegeloffen/Türoffen","rules":[{"t":"set","p":"payload","pt":"msg","to":"2","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":1100,"y":400,"wires":[["a665152a589572e1"]]},{"id":"fa18458659f7a66b","type":"comment","z":"8e615e82aa5ca254","name":"Tür geschlossen und versperrt = grün","info":"","x":1150,"y":160,"wires":[]},{"id":"8b6be7862c9b4c12","type":"comment","z":"8e615e82aa5ca254","name":"Tür offen und nicht versperrt = rot","info":"","x":1130,"y":360,"wires":[]},{"id":"eec477e4a3ee2d82","type":"comment","z":"8e615e82aa5ca254","name":"Tür geschlossen und nicht versperrt = blau","info":"","x":1160,"y":260,"wires":[]},{"id":"1d2886b634a17e5f","type":"BooleanLogicUltimate","z":"8e615e82aa5ca254","name":"and","filtertrue":"both","persist":true,"sInitializeWith":"WaitForPayload","triggertopic":"trigger","outputtriggeredby":"all","inputCount":2,"topic":"result","restrictinputevaluation":true,"delayEvaluation":0,"x":870,"y":400,"wires":[["948686596bf18ec7"],[],[]]},{"id":"4250163706cf6bf1","type":"BooleanLogicUltimate","z":"8e615e82aa5ca254","name":"and","filtertrue":"both","persist":true,"sInitializeWith":"WaitForPayload","triggertopic":"trigger","outputtriggeredby":"all","inputCount":2,"topic":"result","restrictinputevaluation":true,"delayEvaluation":0,"x":870,"y":200,"wires":[["18842d1812434ed6"],[],[]]},{"id":"a5ef65919e1aed47","type":"BooleanLogicUltimate","z":"8e615e82aa5ca254","name":"or","filtertrue":"both","persist":true,"sInitializeWith":"WaitForPayload","triggertopic":"trigger","outputtriggeredby":"all","inputCount":2,"topic":"result","restrictinputevaluation":true,"delayEvaluation":0,"x":870,"y":300,"wires":[[],["b3b0ead5139656c3"],[]]},{"id":"85d7420709df1104","type":"debug","z":"8e615e82aa5ca254","name":"debug 39","active":true,"tosidebar":true,"console":false,"tostatus":true,"complete":"payload","targetType":"msg","statusVal":"payload","statusType":"auto","x":1360,"y":200,"wires":[]},{"id":"90c542ed7594a35b","type":"debug","z":"8e615e82aa5ca254","name":"debug 40","active":true,"tosidebar":true,"console":false,"tostatus":true,"complete":"payload","targetType":"msg","statusVal":"payload","statusType":"auto","x":1360,"y":300,"wires":[]},{"id":"a665152a589572e1","type":"debug","z":"8e615e82aa5ca254","name":"debug 41","active":true,"tosidebar":true,"console":false,"tostatus":true,"complete":"payload","targetType":"msg","statusVal":"payload","statusType":"auto","x":1360,"y":400,"wires":[]},{"id":"b96718064cbfe30a","type":"inject","z":"8e615e82aa5ca254","name":"","props":[{"p":"payload"},{"p":"topic","v":"1","vt":"num"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"true","payloadType":"bool","x":150,"y":240,"wires":[["ad7939c8d22deaea"]]},{"id":"f5e9a3ca9c74d5ee","type":"inject","z":"8e615e82aa5ca254","name":"","props":[{"p":"payload"},{"p":"topic","v":"1","vt":"num"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"true","payloadType":"bool","x":150,"y":320,"wires":[["3cd5c40777d49795"]]},{"id":"d0aa196442346584","type":"inject","z":"8e615e82aa5ca254","name":"","props":[{"p":"payload"},{"p":"topic","v":"2","vt":"num"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"false","payloadType":"bool","x":150,"y":280,"wires":[["ad7939c8d22deaea"]]},{"id":"28d7553d6467bd9f","type":"inject","z":"8e615e82aa5ca254","name":"","props":[{"p":"payload"},{"p":"topic","v":"2","vt":"num"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"false","payloadType":"bool","x":150,"y":360,"wires":[["3cd5c40777d49795"]]}]

Lg

Hallo,
ich habe heute mit dem Webinstaller Ai on the Edge installiert.
Im Log bekomme ich aber die Fehlermeldung: W (13539) MAIN: Web UI version (?) does not match firmware version (04f2f23+) !

Habe ich auch ein esp32 Cam die für dieses Vorhaben nicht geeignet ist?

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7664
load:0x40078000,len:15360
load:0x40080400,len:3744
entry 0x4008067c
I (27) boot: ESP-IDF 4.3.2 2nd stage bootloader
I (27) boot: compile time 20:02:47
I (27) boot: chip revision: 1
I (30) boot_comm: chip revision: 1, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed      : 40MHz
I (41) boot.esp32: SPI Mode       : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (50) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (59) boot: ## Label            Usage          Type ST Offset   Length
I (67) boot:  0 nvs              WiFi data        01 02 00009000 00004000
I (74) boot:  1 otadata          OTA data         01 00 0000d000 00002000
I (82) boot:  2 phy_init         RF data          01 01 0000f000 00001000
I (89) boot:  3 ota_0            OTA app          00 10 00010000 001db000
I (96) boot:  4 ota_1            OTA app          00 11 001f0000 001db000
I (104) boot: End of partition table
I (108) boot_comm: chip revision: 1, min. application chip revision: 0
I (115) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=4bda0h (310688) map
I (243) esp_image: segment 1: paddr=0005bdc8 vaddr=3ffb0000 size=04250h ( 16976) load
I (250) esp_image: segment 2: paddr=00060020 vaddr=400d0020 size=166f00h (1470208) map
I (813) esp_image: segment 3: paddr=001c6f28 vaddr=3ffb4250 size=00038h (    56) load
I (813) esp_image: segment 4: paddr=001c6f68 vaddr=40080000 size=1b6a0h (112288) load
I (867) esp_image: segment 5: paddr=001e2610 vaddr=50000000 size=00010h (    16) load
I (881) boot: Loaded app from partition at offset 0x10000
I (881) boot: Disabling RNG early entropy source...
I (893) psram: This chip is ESP32-D0WD
I (893) spiram: Found 64MBit SPI RAM device
I (893) spiram: SPI RAM mode: flash 40m sram 40m
I (898) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (905) cpu_start: Pro cpu up.
I (909) cpu_start: Starting app cpu, entry point is 0x40083b44
I (0) cpu_start: App cpu up.
I (1803) spiram: SPI SRAM memory test OK
I (1811) cpu_start: Pro cpu start user code
I (1811) cpu_start: cpu freq: 160000000
I (1811) cpu_start: Application information:
I (1814) cpu_start: Project name:     esp32cam-server-only
I (1820) cpu_start: App version:      v13.0.8
I (1825) cpu_start: Compile time:     Dec 19 2022 20:41:40
I (1832) cpu_start: ELF file SHA256:  2279775554dcdb30...
I (1838) cpu_start: ESP-IDF:          4.4.2
I (1843) heap_init: Initializing. RAM available for dynamic allocation:
I (1850) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1856) heap_init: At 3FFC06F0 len 0001F910 (126 KiB): DRAM
I (1862) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1869) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1875) heap_init: At 4009B6A0 len 00004960 (18 KiB): IRAM
I (1882) spiram: Adding pool of 4095K of external SPI memory to heap allocator
I (1891) spi_flash: detected chip: generic
I (1894) spi_flash: flash io: dio
I (1904) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1909) spiram: Reserving pool of 40K of internal memory for DMA/internal allocations
I (1919) MAIN: 





I (1919) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (3929) gpio: GPIO[25]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2 
I (3929) cam_hal: cam init ok
I (3929) sccb: pin_sda 26 pin_scl 27
I (3929) sccb: sccb_i2c_port=1

I (3939) gpio: GPIO[32]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (3969) camera: Detected camera at address=0x30
I (3969) camera: Detected OV2640 camera
I (3969) camera: Camera PID=0x26 VER=0x42 MIDL=0x7f MIDH=0xa2
I (4049) cam_hal: buffer_size: 32768, half_buffer_size: 4096, node_buffer_size: 2048, node_cnt: 16, total_cnt: 15
I (4049) cam_hal: Allocating 61440 Byte frame buffer in PSRAM
I (4059) cam_hal: cam config ok
I (4059) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
I (6169) MAIN: Using SDMMC peripheral
Name: 00000
Type: SDHC/SDXC
Speed: 20 MHz
Size: 30528MB
I (6239) MAIN: =================================================
I (6249) MAIN: ==================== Startup ====================
I (6269) MAIN: =================================================
I (6279) MAIN: Branch: 'HEAD', Revision: 04f2f23+, Date/Time: 2022-12-19 20:41, Web UI: ?
I (6289) MAIN: Reset reason: Power-on event
I (6299) OTA: Start CheckOTAUpdateCheck...
I (6309) OTA: SHA-256 for the partition table: : 9d4a2809ae90fb20709a8ca3dd3ac3462e1e73286bcd31b689060c91de06fa3a
I (6329) OTA: SHA-256 for bootloader: : 4a9573dafac5d5c79c43e5a356568332da3a99dd2e220da6ceeadc96d32708a2
I (6889) OTA: SHA-256 for current firmware: : 355e1c6ae8b38e8311d1d117c00cc1016379005a25333ffa59d3043261449699
I (6939) wifi:wifi driver task: 3ffd4d78, prio:23, stack:6656, core=0
I (6939) system_api: Base MAC address is not set
I (6939) system_api: read default base MAC address from EFUSE
I (6959) wifi:wifi firmware version: eeaa27d
I (6959) wifi:wifi certification version: v7.0
I (6959) wifi:config NVS flash: enabled
I (6959) wifi:config nano formating: disabled
I (6959) wifi:Init data frame dynamic rx buffer num: 16
I (6969) wifi:Init management frame dynamic rx buffer num: 16
I (6969) wifi:Init management short buffer num: 32
I (6979) wifi:Init static tx buffer num: 16
I (6979) wifi:Init tx cache buffer num: 16
I (6979) wifi:Init static rx buffer size: 1600
I (6989) wifi:Init static rx buffer num: 10
I (6989) wifi:Init dynamic rx buffer num: 16
I (6999) wifi_init: rx ba win: 6
I (6999) wifi_init: tcpip mbox: 32
I (6999) wifi_init: udp mbox: 6
I (7009) wifi_init: tcp mbox: 6
I (7009) wifi_init: tcp tx win: 5744
I (7019) wifi_init: tcp rx win: 5744
I (7019) wifi_init: tcp mss: 1440
I (7019) wifi_init: WiFi IRAM OP enabled
I (7029) wifi_init: WiFi RX IRAM OP enabled
I (7079) phy_init: phy_version 4670,719f9f6,Feb 18 2021,17:07:07
I (7189) wifi:mode : sta (40:22:d8:04:ce:18)
I (7189) wifi:enable tsf
I (7189) BLINK: Flash - start
I (7189) WIFI: Set Hostname to:watermeter
I (7189) WIFI: wifi_init_sta finished.
I (7389) BLINK: Flash - done
I (7799) wifi:new:<6,0>, old:<1,0>, ap:<255,255>, sta:<6,0>, prof:1
I (8629) wifi:state: init -> auth (b0)
I (8639) wifi:state: auth -> assoc (0)
I (8649) wifi:state: assoc -> run (10)
I (8679) wifi:connected with GoMue, aid = 2, channel 6, BW20, bssid = 22:e8:29:9d:5b:2a
I (8689) wifi:security: WPA2-PSK, phy: bgn, rssi: -67
I (8699) wifi:pm start, type: 1

I (8859) wifi:AP's beacon interval = 102400 us, DTIM period = 3
W (8879) wifi:<ba-add>idx:0 (ifx:0, 22:e8:29:9d:5b:2a), tid:0, ssn:1, winSize:64
I (9429) esp_netif_handlers: sta ip: 192.168.178.59, mask: 255.255.255.0, gw: 192.168.178.1
I (9429) WIFI: got ip:192.168.178.59
I (9429) BLINK: Flash - start
I (9429) WIFI: connected to ap SSID: XXXXX, password: XXXXXXX
I (11439) SNTP: Initializing SNTP
I (11439) SNTP: Time is not set yet. Getting time over NTP server pool.ntp.org
I (11449) SNTP: Waiting until we get a time from the NTP server pool.ntp.org
I (11459) SNTP: Status: Reset
W (13139) wifi:<ba-add>idx:1 (ifx:0, 22:e8:29:9d:5b:2a), tid:6, ssn:2, winSize:64
I (13469) SNTP: Status OK
I (13479) SNTP: Time is synced with NTP Server pool.ntp.org
I (13489) SNTP: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
I (13499) SNTP: The current date/time in Berlin is: 2023-01-26_20:41:29
I (13499) MAIN: =================================================
I (13509) MAIN: ================== Main Started =================
I (13519) MAIN: =================================================
W (13539) MAIN: Web UI version (?) does not match firmware version (04f2f23+) !
I (13549) psram: This chip is ESP32-D0WD
I (13549) spiram: Found 64MBit SPI RAM device
I (13549) spiram: SPI RAM mode: flash 40m sram 40m
I (13559) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (13559) MAIN: The device has 8 MBytes of PSRAM
I (15579) MAIN SERVER: Starting server on port: '80'
I (15579) MAIN SERVER: Registering URI handlers
I (15579) TFLITE SERVER: server_part_camera - Registering URI handlers
I (15579) OTA: Registering URI handlers
I (15589) GPIO: start GpioHandler
I (15589) GPIO: register GPIO Uri
I (15599) GPIO: server_GPIO - Registering URI handlers
I (15599) MAIN: Initialization completed successfully!
I (15639) ov2640: Set PLL: clk_2x: 0, clk_div: 0, pclk_auto: 0, pclk_div: 8
I (19429) BLINK: Flash - done
I (20039) LOGFILE: Log Level set to ERROR
I (20049) SNTP: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
I (20049) GPIO: read GPIO config and init GPIO
I (20069) GPIO: GPIO init completed, handler is disabled

Hallo,
vlt schon besprochen, aber kann man Alexa ausschalten? Also ohne mir zuzuhören?
Mich würde nur das Display für die VIS interessieren wo dann der KNX Präsenzmelder das Display an/aus schaltet.

Lg Hp

@glasfaser
tja gute Frage, wäre nie darauf gekommen das zu kontrollieren - muss mal schauen wie das geht.
Danke, hilft mir schon mal weiter

Edit: hab das hier gefunden und werde es morgen durchackern - heute bin, eich einfach viel zu müde.
Nochmals danke, melde mich morgen, wenn ich darf.

Hallo,
wie beschrieben habe ich mir einen neuen IOBroker Docker Container erstellt und den Zigbee Adapter installiert.
Konfiguriert habe ich alles so wie in dem Video hier

Bei mir werden allerdings unter Instanzen nicht die drei Hacken grün siehe Bild

Mit iobroker logs --watch ekomme ich den log

root@RPi4:/opt/iobroker# iobroker logs --watch
2022-12-23 20:59:35.766  - info: admin.0 (733) ==> Connected system.user.admin from ::ffff:192.168.178.32
2022-12-23 20:59:35.918  - error: zigbee.0 (31060) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2022-12-23 20:59:56.898  - info: host.RPi4 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2022-12-23 20:59:56.909  - info: zigbee.0 (31060) Got terminate signal TERMINATE_YOURSELF
2022-12-23 20:59:56.910  - info: host.RPi4 stopInstance system.adapter.zigbee.0 send kill signal
2022-12-23 20:59:57.032  - info: admin.0 (733) <== Disconnect system.user.admin from ::ffff:192.168.178.32 
2022-12-23 20:59:56.913  - info: zigbee.0 (31060) cleaned everything up...
2022-12-23 20:59:56.922  - info: zigbee.0 (31060) Zigbee: disabling joining new devices.
2022-12-23 20:59:57.052  - warn: zigbee.0 (31060) Failed to stop zigbee during startup
2022-12-23 20:59:57.053  - info: zigbee.0 (31060) terminating
2022-12-23 20:59:57.054  - info: zigbee.0 (31060) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2022-12-23 20:59:57.609  - info: host.RPi4 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2022-12-23 20:59:59.977  - info: host.RPi4 instance system.adapter.zigbee.0 started with pid 31113
2022-12-23 21:00:04.251  - info: zigbee.0 (31113) starting. Version 1.7.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.23
2022-12-23 21:00:04.387  - info: zigbee.0 (31113) Starting Zigbee  npm ...
2022-12-23 21:00:04.711  - error: zigbee.0 (31113) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0'"
2022-12-23 21:00:04.712  - error: zigbee.0 (31113) Failed to start Zigbee
2022-12-23 21:00:04.713  - error: zigbee.0 (31113) Error herdsman start
2022-12-23 21:00:04.902  - info: zigbee.0 (31113) Installed Version: iobroker.zigbee@1.7.6
2022-12-23 21:00:14.718  - info: zigbee.0 (31113) Try to reconnect. 1 attempts left
2022-12-23 21:00:14.720  - info: zigbee.0 (31113) Starting Zigbee  npm ...
2022-12-23 21:00:14.739  - error: zigbee.0 (31113) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0'"
2022-12-23 21:00:14.742  - error: zigbee.0 (31113) Failed to start Zigbee
2022-12-23 21:00:14.743  - error: zigbee.0 (31113) Error herdsman start
2022-12-23 21:00:14.767  - info: zigbee.0 (31113) Installed Version: iobroker.zigbee@1.7.6
2022-12-23 21:22:08.531  - info: admin.0 (733) ==> Connected system.user.admin from ::ffff:192.168.178.32
2022-12-23 21:22:08.725  - error: zigbee.0 (31113) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2022-12-23 21:22:22.343  - info: host.RPi4 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2022-12-23 21:22:22.352  - info: host.RPi4 stopInstance system.adapter.zigbee.0 send kill signal
2022-12-23 21:22:22.351  - info: zigbee.0 (31113) Got terminate signal TERMINATE_YOURSELF
2022-12-23 21:22:22.476  - info: admin.0 (733) <== Disconnect system.user.admin from ::ffff:192.168.178.32 
2022-12-23 21:22:22.355  - info: zigbee.0 (31113) cleaned everything up...
2022-12-23 21:22:22.362  - info: zigbee.0 (31113) Zigbee: disabling joining new devices.
2022-12-23 21:22:22.515  - warn: zigbee.0 (31113) Failed to stop zigbee during startup
2022-12-23 21:22:22.516  - info: zigbee.0 (31113) terminating
2022-12-23 21:22:22.517  - info: zigbee.0 (31113) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2022-12-23 21:22:23.064  - info: host.RPi4 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2022-12-23 21:22:25.398  - info: host.RPi4 instance system.adapter.zigbee.0 started with pid 32196
2022-12-23 21:22:29.533  - info: zigbee.0 (32196) starting. Version 1.7.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.23
2022-12-23 21:22:29.711  - info: zigbee.0 (32196) Starting Zigbee  npm ...
2022-12-23 21:22:30.060  - error: zigbee.0 (32196) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0'"
2022-12-23 21:22:30.061  - error: zigbee.0 (32196) Failed to start Zigbee
2022-12-23 21:22:30.062  - error: zigbee.0 (32196) Error herdsman start
2022-12-23 21:22:30.257  - info: zigbee.0 (32196) Installed Version: iobroker.zigbee@1.7.6
2022-12-23 21:22:40.067  - info: zigbee.0 (32196) Try to reconnect. 1 attempts left
2022-12-23 21:22:40.068  - info: zigbee.0 (32196) Starting Zigbee  npm ...
2022-12-23 21:22:40.085  - error: zigbee.0 (32196) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0'"
2022-12-23 21:22:40.088  - error: zigbee.0 (32196) Failed to start Zigbee
2022-12-23 21:22:40.090  - error: zigbee.0 (32196) Error herdsman start
2022-12-23 21:22:40.140  - info: zigbee.0 (32196) Installed Version: iobroker.zigbee@1.7.6

Würde mich freuen, wenn mir jemand weiterhelfen kann.
Lg