Victron Smartmeter ET340 wie per RS485 auslesen

hg6806

Hallo zusammen,

habe hier ein ET340 von Victron was ich gerne für meine Wärmepumpe nehmen würde.
Doch wie kann ich das per ioBroker auslesen?
Ich habe es per FTDI RS485 auf USB und Modbus Adapter versucht, aber der bleibt gelb.

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Ich habe es per FTDI RS485 auf USB und Modbus Adapter versucht, aber der bleibt gelb.

dann wird wohl irgendwas nicht stimmen.

hg6806

@homoran

Hmmm, 2. RS485-USB Adapter versucht, das gleich.

Stimmt, oder?

Ich habe bis jetzt noch nichts über RS485 gemacht. Muss man da noch Register definieren?

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Stimmt, oder?

weiss ich nicht. Ich kenne deine Anlage nicht.

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Muss man da noch Register definieren?

Natürlich, sonst weiss der Adapter ja nicht was für Werte er abrufen soll.
Erst mal mit einem Register beginnen.

ohne jeglichen Register wird die letzte Ampel auch nicht grün

hg6806

@homoran

Wie gesagt, habe mit RS485 und Modbus noch nichts gemacht.

Hier ein Auszug aus dem Protokoll-Datenblatt

Wenn ich es wie folgt eintrage, bekomme ich immer 0V, Adapter wird aber grün

Homoran

@hg6806 ich glaube du musst due Hex Adresse in Dezimal umrechnen und dann eintragen

hg6806

@homoran

Du meinst du physik. Adressen wahrscheinlich.
Wenn ich das tue, verschwinden die Werte komplett.

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Wenn ich das tue,

zeigen!
passiert das such wenn du Alias verwenden anhakst?
was steht im debug-log?

hg6806

@homoran

So ist es eingestellt:

Und das ist das Log:


v7.0.23

7
2
Log-Größe: 5.8 KB

modbus.6
Zeit
debug
Nachricht

modbus.6
2024-09-14 13:24:04.750	debug	Cleaning up request fifo.

modbus.6
2024-09-14 13:24:04.749	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 13:24:04.748	info	Disconnected from slave

modbus.6
2024-09-14 13:24:03.747	warn	[1] Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 13:24:03.746	error	Request timed out.

modbus.6
2024-09-14 13:24:03.746	warn	Error: undefined

modbus.6
2024-09-14 13:23:58.742	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 13:23:58.741	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 13:23:58.741	info	Connected to slave

modbus.6
2024-09-14 13:23:58.727	debug	connect to serial /dev/ttyUSB2 with 38400

modbus.6
2024-09-14 13:23:58.524	info	Can not execute task add for ID undefined: Parameter "id" needs to be of type "string" but type "undefined" has been passed

modbus.6
2024-09-14 13:23:58.523	info	Can not execute task add for ID undefined: Parameter "id" needs to be of type "string" but type "undefined" has been passed

modbus.6
2024-09-14 13:23:58.326	debug	Initialize Objects for holdingRegs: []

modbus.6
2024-09-14 13:23:58.326	debug	Add inputRegisters.300052_Hz: {"_id":"inputRegisters.300052_Hz","type":"state","common":{"name":"Hz","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"Hz"},"native":{"regType":"inputRegs","address":270051,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":10}}

modbus.6
2024-09-14 13:23:58.326	debug	Add inputRegisters.300001_V_L1-N: {"_id":"inputRegisters.300001_V_L1-N","type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":270000,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":0.1}}

modbus.6
2024-09-14 13:23:58.326	debug	Add undefined: {"type":"state","common":{"name":"V L3-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-29997,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"10"}}

modbus.6
2024-09-14 13:23:58.326	error	Invalid object: {"type":"state","common":{"name":"V L3-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-29997,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"10"}}

modbus.6
2024-09-14 13:23:58.326	error	Invalid data inputRegisters/1: {"_address":4,"deviceId":1,"name":"V L3-N","description":"V L3-N","unit":"V","type":"int32be","len":2,"factor":"10","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-29997,"fullId":"modbus.6.1"}

modbus.6
2024-09-14 13:23:58.325	debug	Add undefined: {"type":"state","common":{"name":"V L2-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-29999,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 13:23:58.325	error	Invalid object: {"type":"state","common":{"name":"V L2-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-29999,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 13:23:58.325	error	Invalid data inputRegisters/0: {"_address":2,"deviceId":1,"name":"V L2-N","description":"V L2-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-29999,"fullId":"modbus.6.0"}

modbus.6
2024-09-14 13:23:58.324	debug	Initialize Objects for inputRegs: [{"_address":2,"deviceId":1,"name":"V L2-N","description":"V L2-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-29999},{"_address":4,"deviceId":1,"name":"V L3-N","description":"V L3-N","unit":"V","type":"int32be","len":2,"factor":"10","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-29997},{"_address":300001,"deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":0.1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":270000,"id":"inputRegisters.300001_V_L1-N"},{"_address":300052,"name":"Hz","description":"Hz","unit":"Hz","type":"uint16be","len":1,"factor":10,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","deviceId":1,"address":270051,"id":"inputRegisters.300052_Hz"}]

modbus.6
2024-09-14 13:23:58.324	debug	Initialize Objects for coils: []

modbus.6
2024-09-14 13:23:58.324	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

modbus.6
2024-09-14 13:23:58.324	debug	Initialize Objects for disInputs: [{"_address":10014,"deviceId":1,"name":"","description":"","formula":"","role":"level","room":"","cw":"","isScale":"","address":0,"id":"discreteInputs.10016","len":1}]

modbus.6
2024-09-14 13:23:58.323	error	Invalid inputRegisters address: -29999

modbus.6
2024-09-14 13:23:58.322	error	Invalid inputRegisters address: -29997

modbus.6
2024-09-14 13:23:58.121	info	starting. Version 6.2.3 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.15.1, js-controller: 6.0.11

modbus.6
2024-09-14 13:23:57.863	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.6
2024-09-14 13:23:53.088	info	terminating

modbus.6
2024-09-14 13:23:52.586	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

modbus.6
2024-09-14 13:23:52.586	debug	Plugin sentry destroyed

modbus.6
2024-09-14 13:23:52.585	info	terminating

modbus.6
2024-09-14 13:23:52.583	info	Got terminate signal TERMINATE_YOURSELF

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

So ist es eingestellt:

bitte nur ein Register bis es läuft.
sobald auch nur ein Fehler in der Liste ist kommt gar kein Wert!

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

                        2024-09-14 13:23:58.323	error	Invalid inputRegisters address: -29999

das kann man jetzt nicht zuordnen!

Hier sieht man mehr

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

                        2024-09-14 13:23:58.324	debug	Initialize Objects for inputRegs: [{"**_address":2,"**deviceId":1,"name":"V L2-N","description":"V L2-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","**address":-29999}**,{"_address":4,"deviceId":1,"name":"V L3-N","description":"V L3-N","unit":"V","type":"int32be","len":2,"factor":"10","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-29997},{"_address":300001,"deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":0.1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":270000,"id":"inputRegisters.300001_V_L1-N"},{"_address":300052,"name":"Hz","description":"Hz","unit":"Hz","type":"uint16be","len":1,"factor":10,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","deviceId":1,"address":270051,"id":"inputRegisters.300052_Hz"}]

bitte nur mit einer hardware Adresse arbeiten und dann mal mit und ohne Aluas probieren.
Hier wird beides umgerechnet. Adressen mit 6 Stellen sind mir (und anscheinend auch dem Adapter) unbekannt

hg6806

@homoran

2024-09-14 13:23:58.323 error Invalid inputRegisters address: -29999

...kam von der eingetragenen phy. Adr. "2"

Jetzt nochmal reduziert auf:

Hier das Log nach der Ruduktion:


v7.0.23

3
6
Log-Größe: 845.4 KB

modbus.6
Zeit
debug
Nachricht

modbus.6
2024-09-14 14:20:59.283	debug	Cleaning up request fifo.

modbus.6
2024-09-14 14:20:59.283	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 14:20:59.280	info	Disconnected from slave

modbus.6
2024-09-14 14:20:58.280	warn	[1] Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 14:20:58.279	error	Request timed out.

modbus.6
2024-09-14 14:20:58.279	warn	Error: undefined

modbus.6
2024-09-14 14:20:53.275	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 14:20:53.274	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 14:20:53.273	info	Connected to slave

modbus.6
2024-09-14 14:20:53.259	debug	connect to serial /dev/ttyUSB2 with 38400

modbus.6
2024-09-14 14:20:52.940	debug	Initialize Objects for holdingRegs: []

modbus.6
2024-09-14 14:20:52.940	debug	Add inputRegisters.300001_V_L1-N: {"_id":"inputRegisters.300001_V_L1-N","type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":270000,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":0.1}}

modbus.6
2024-09-14 14:20:52.939	debug	Initialize Objects for inputRegs: [{"_address":300001,"deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":0.1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":270000,"id":"inputRegisters.300001_V_L1-N"}]

modbus.6
2024-09-14 14:20:52.939	debug	Initialize Objects for coils: []

modbus.6
2024-09-14 14:20:52.939	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

modbus.6
2024-09-14 14:20:52.938	debug	Initialize Objects for disInputs: [{"_address":10014,"deviceId":1,"name":"","description":"","formula":"","role":"level","room":"","cw":"","isScale":"","address":0,"id":"discreteInputs.10016","len":1}]

modbus.6
2024-09-14 14:20:52.715	info	starting. Version 6.2.3 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.15.1, js-controller: 6.0.11

modbus.6
2024-09-14 14:20:52.506	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.6
2024-09-14 14:20:52.259	debug	States create User PubSub Client

modbus.6
2024-09-14 14:20:52.258	debug	States create System PubSub Client

modbus.6
2024-09-14 14:20:52.160	debug	Redis States: Use Redis connection: 127.0.0.1:9000

modbus.6
2024-09-14 14:20:52.041	debug	Objects connected to redis: 127.0.0.1:9001

modbus.6
2024-09-14 14:20:51.982	debug	Objects client initialize lua scripts

modbus.6
2024-09-14 14:20:51.771	debug	Objects create User PubSub Client

modbus.6
2024-09-14 14:20:51.770	debug	Objects create System PubSub Client

modbus.6
2024-09-14 14:20:51.728	debug	Objects client ready ... initialize now

modbus.6
2024-09-14 14:20:51.667	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

modbus.6
2024-09-14 14:20:12.588	info	terminating

modbus.6
2024-09-14 14:20:12.087	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

modbus.6
2024-09-14 14:20:12.086	debug	Plugin sentry destroyed

modbus.6
2024-09-14 14:20:12.086	info	terminating

modbus.6
2024-09-14 14:20:12.084	info	Got terminate signal TERMINATE_YOURSELF

modbus.6
2024-09-14 14:19:56.121	debug	Cleaning up request fifo.

modbus.6
2024-09-14 14:19:56.120	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 14:19:56.118	info	Disconnected from slave

modbus.6
2024-09-14 14:19:55.117	warn	[1] Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 14:19:55.117	error	Request timed out.

modbus.6
2024-09-14 14:19:55.116	warn	Error: undefined

modbus.6
2024-09-14 14:19:50.114	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 14:19:50.113	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 14:19:50.113	info	Connected to slave

modbus.6
2024-09-14 14:19:50.101	debug	connect to serial /dev/ttyUSB2 with 38400

modbus.6
2024-09-14 14:19:49.889	debug	Remove old object modbus.6.inputRegisters.300052_Hz

modbus.6
2024-09-14 14:19:49.838	debug	Initialize Objects for holdingRegs: []

modbus.6
2024-09-14 14:19:49.838	debug	Add inputRegisters.300001_V_L1-N: {"_id":"inputRegisters.300001_V_L1-N","type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":270000,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":0.1}}

modbus.6
2024-09-14 14:19:49.838	debug	Initialize Objects for inputRegs: [{"_address":300001,"deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":0.1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":270000,"id":"inputRegisters.300001_V_L1-N"}]

modbus.6
2024-09-14 14:19:49.838	debug	Initialize Objects for coils: []

modbus.6
2024-09-14 14:19:49.837	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

modbus.6
2024-09-14 14:19:49.837	debug	Initialize Objects for disInputs: [{"_address":10014,"deviceId":1,"name":"","description":"","formula":"","role":"level","room":"","cw":"","isScale":"","address":0,"id":"discreteInputs.10016","len":1}]

modbus.6
2024-09-14 14:19:49.637	info	starting. Version 6.2.3 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.15.1, js-controller: 6.0.11

modbus.6
2024-09-14 14:19:49.355	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.6
2024-09-14 14:19:49.278	debug	States connected to redis: 127.0.0.1:9000

modbus.6
2024-09-14 14:19:49.178	debug	States create User PubSub Client

modbus.6
2024-09-14 14:19:49.178	debug	States create System PubSub Client

modbus.6
2024-09-14 14:19:49.123	debug	Redis States: Use Redis connection: 127.0.0.1:9000

modbus.6
2024-09-14 14:19:49.042	debug	Objects connected to redis: 127.0.0.1:9001

modbus.6
2024-09-14 14:19:49.036	debug	Objects client initialize lua scripts

modbus.6
2024-09-14 14:19:48.879	debug	Objects create User PubSub Client

modbus.6
2024-09-14 14:19:48.878	debug	Objects create System PubSub Client

modbus.6
2024-09-14 14:19:48.832	debug	Objects client ready ... initialize now

modbus.6
2024-09-14 14:19:48.766	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

modbus.6
2024-09-14 14:19:44.458	info	terminating

modbus.6
2024-09-14 14:19:43.957	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

modbus.6
2024-09-14 14:19:43.957	debug	Plugin sentry destroyed

modbus.6
2024-09-14 14:19:43.956	info	terminating

modbus.6
2024-09-14 14:19:43.955	info	Got terminate signal TERMINATE_YOURSELF

modbus.6
2024-09-14 14:19:43.770	debug	Cleaning up request fifo.

modbus.6
2024-09-14 14:19:43.770	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 14:19:43.768	info	Disconnected from slave

modbus.6
2024-09-14 14:19:42.767	warn	[1] Poll error count: 3 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 14:19:42.767	error	Request timed out.

modbus.6
2024-09-14 14:19:42.766	warn	Error: undefined

modbus.6
2024-09-14 14:19:37.765	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 14:19:37.765	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 14:19:37.765	info	Connected to slave

modbus.6
2024-09-14 14:19:37.754	debug	connect to serial /dev/ttyUSB2 with 38400

Mit und ohne Aliases ausprobiert.
Muss ich noch eine Geräte-ID eintragen? Steht noch auf 1

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Muss ich noch eine Geräte-ID eintragen? Steht noch auf 1

Natürlich wenn dein Energymeter nicht die ID1 hat.

aber die könnte stimmen.

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Jetzt nochmal reduziert auf:

du sollst nicht die sechsstrllige nehmen!!!

hg6806

@homoran

Nur die sechstellige funktioniert!

Hier ein Log mit der Phy. Adresse:


v7.0.23

9
4
Log-Größe: 2.3 MB

modbus.6
Zeit
debug
Nachricht

modbus.6
2024-09-14 16:38:41.122	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 16:38:41.121	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 16:38:41.121	info	Connected to slave

modbus.6
2024-09-14 16:38:41.108	debug	connect to serial /dev/ttyUSB2 with 38400

modbus.6
2024-09-14 16:38:41.032	info	Can not execute task add for ID undefined: Parameter "id" needs to be of type "string" but type "undefined" has been passed

modbus.6
2024-09-14 16:38:40.873	debug	Initialize Objects for holdingRegs: []

modbus.6
2024-09-14 16:38:40.872	debug	Add undefined: {"type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-30001,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 16:38:40.871	error	Invalid object: {"type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-30001,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 16:38:40.871	error	Invalid data inputRegisters/0: {"_address":"0","deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-30001,"fullId":"modbus.6.0"}

modbus.6
2024-09-14 16:38:40.871	debug	Initialize Objects for inputRegs: [{"_address":"0","deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-30001}]

modbus.6
2024-09-14 16:38:40.871	debug	Initialize Objects for coils: []

modbus.6
2024-09-14 16:38:40.870	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

modbus.6
2024-09-14 16:38:40.869	debug	Initialize Objects for disInputs: [{"_address":10014,"deviceId":1,"name":"","description":"","formula":"","role":"level","room":"","cw":"","isScale":"","address":0,"id":"discreteInputs.10016","len":1}]

modbus.6
2024-09-14 16:38:40.868	error	Invalid inputRegisters address: -30001

modbus.6
2024-09-14 16:38:40.611	info	starting. Version 6.2.3 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.15.1, js-controller: 6.0.11

modbus.6
2024-09-14 16:38:40.039	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.6
2024-09-14 16:38:39.941	debug	States connected to redis: 127.0.0.1:9000

modbus.6
2024-09-14 16:38:39.759	debug	States create User PubSub Client

modbus.6
2024-09-14 16:38:39.758	debug	States create System PubSub Client

modbus.6
2024-09-14 16:38:39.653	debug	Redis States: Use Redis connection: 127.0.0.1:9000

modbus.6
2024-09-14 16:38:39.573	debug	Objects connected to redis: 127.0.0.1:9001

modbus.6
2024-09-14 16:38:39.569	debug	Objects client initialize lua scripts

modbus.6
2024-09-14 16:38:39.407	debug	Objects create User PubSub Client

modbus.6
2024-09-14 16:38:39.406	debug	Objects create System PubSub Client

modbus.6
2024-09-14 16:38:39.360	debug	Objects client ready ... initialize now

modbus.6
2024-09-14 16:38:39.300	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

modbus.6
2024-09-14 16:38:18.759	info	terminating

modbus.6
2024-09-14 16:38:18.258	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

modbus.6
2024-09-14 16:38:18.257	debug	Plugin sentry destroyed

modbus.6
2024-09-14 16:38:18.257	info	terminating

modbus.6
2024-09-14 16:38:18.256	info	Got terminate signal TERMINATE_YOURSELF

modbus.6
2024-09-14 16:37:47.001	debug	Cleaning up request fifo.

modbus.6
2024-09-14 16:37:47.001	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 16:37:46.999	info	Disconnected from slave

modbus.6
2024-09-14 16:37:45.999	warn	[1] Poll error count: 1 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 16:37:45.998	error	Request timed out.

modbus.6
2024-09-14 16:37:45.998	warn	Error: undefined

modbus.6
2024-09-14 16:37:40.993	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 16:37:40.993	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 16:37:40.992	info	Connected to slave

modbus.6
2024-09-14 16:37:40.973	debug	connect to serial /dev/ttyUSB2 with 38400

modbus.6
2024-09-14 16:37:40.866	info	Can not execute task add for ID undefined: Parameter "id" needs to be of type "string" but type "undefined" has been passed

modbus.6
2024-09-14 16:37:40.703	debug	Remove old object modbus.6.inputRegisters.300001_V_L1-N

modbus.6
2024-09-14 16:37:40.636	debug	Initialize Objects for holdingRegs: []

modbus.6
2024-09-14 16:37:40.635	debug	Add undefined: {"type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-30001,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 16:37:40.635	error	Invalid object: {"type":"state","common":{"name":"V L1-N","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"V"},"native":{"regType":"inputRegs","address":-30001,"deviceId":1,"type":"int32be","len":2,"offset":0,"factor":"0.1"}}

modbus.6
2024-09-14 16:37:40.635	error	Invalid data inputRegisters/0: {"_address":"0","deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-30001,"fullId":"modbus.6.0"}

modbus.6
2024-09-14 16:37:40.634	debug	Initialize Objects for inputRegs: [{"_address":"0","deviceId":1,"name":"V L1-N","description":"V L1-N","unit":"V","type":"int32be","len":2,"factor":"0.1","offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":-30001}]

modbus.6
2024-09-14 16:37:40.634	debug	Initialize Objects for coils: []

modbus.6
2024-09-14 16:37:40.634	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

modbus.6
2024-09-14 16:37:40.632	debug	Initialize Objects for disInputs: [{"_address":10014,"deviceId":1,"name":"","description":"","formula":"","role":"level","room":"","cw":"","isScale":"","address":0,"id":"discreteInputs.10016","len":1}]

modbus.6
2024-09-14 16:37:40.631	error	Invalid inputRegisters address: -30001

modbus.6
2024-09-14 16:37:40.336	info	starting. Version 6.2.3 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.15.1, js-controller: 6.0.11

modbus.6
2024-09-14 16:37:39.999	debug	Plugin sentry Initialize Plugin (enabled=true)

modbus.6
2024-09-14 16:37:39.889	debug	States connected to redis: 127.0.0.1:9000

modbus.6
2024-09-14 16:37:39.711	debug	States create User PubSub Client

modbus.6
2024-09-14 16:37:39.710	debug	States create System PubSub Client

modbus.6
2024-09-14 16:37:39.601	debug	Redis States: Use Redis connection: 127.0.0.1:9000

modbus.6
2024-09-14 16:37:39.515	debug	Objects connected to redis: 127.0.0.1:9001

modbus.6
2024-09-14 16:37:39.507	debug	Objects client initialize lua scripts

modbus.6
2024-09-14 16:37:39.356	debug	Objects create User PubSub Client

modbus.6
2024-09-14 16:37:39.355	debug	Objects create System PubSub Client

modbus.6
2024-09-14 16:37:39.354	debug	Objects client ready ... initialize now

modbus.6
2024-09-14 16:37:39.272	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

modbus.6
2024-09-14 16:37:35.035	info	terminating

modbus.6
2024-09-14 16:37:34.534	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

modbus.6
2024-09-14 16:37:34.533	debug	Plugin sentry destroyed

modbus.6
2024-09-14 16:37:34.533	info	terminating

modbus.6
2024-09-14 16:37:34.532	info	Got terminate signal TERMINATE_YOURSELF

modbus.6
2024-09-14 16:36:48.811	debug	Cleaning up request fifo.

modbus.6
2024-09-14 16:36:48.811	debug	Clearing timeout of the current request.

modbus.6
2024-09-14 16:36:48.809	info	Disconnected from slave

modbus.6
2024-09-14 16:36:47.810	warn	[1] Poll error count: 3 code: {"err":"timeout","timeout":5000}

modbus.6
2024-09-14 16:36:47.809	error	Request timed out.

modbus.6
2024-09-14 16:36:47.809	warn	Error: undefined

modbus.6
2024-09-14 16:36:42.809	debug	[DevID_1/disInputs] Poll address 0 - 0 bits

modbus.6
2024-09-14 16:36:42.809	debug	[DevID_1] Poll start ---------------------

modbus.6
2024-09-14 16:36:42.808	info	Connected to slave

modbus.6
2024-09-14 16:36:42.797	debug	connect to serial /dev/ttyUSB2 with 38400

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Nur die sechstellige funktioniert!

tatsächlich?

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

                        2024-09-14 16:37:40.631	error	Invalid inputRegisters address: -30001

mit und ohne Alias???

hg6806

@homoran

Das war mit, ohne Alias aber das gleich

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

@homoran

Das war mit, ohne Alias aber das gleich

versteh ich nicht

hg6806

@homoran

Das war mit Alias. Ohne Alias gab es den gleichen Fehler.

Ich breche hier ab, da ich gerade festgestellt habe, dass ich an den Abzweig zur Wärmepumpe nicht rankomme, da plombierter Bereich.
Der Zähler hatte ich auch nur 1-phasig an ein Kabel angeschlossen. Vielleicht lag es auch daran.

Trotzdem Danke.

Homoran

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Das war mit Alias. Ohne Alias gab es den gleichen Fehler.

Das kann nicht sein!
dann verändern sich die Register um 30000 oder 30001.

Die invalid Adress muss sich definitiv ändern.

steht bei dir noch was in den discrete Inputs??
@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

                        2024-09-14 16:38:40.870	debug	Add discreteInputs.10016: {"_id":"discreteInputs.10016","type":"state","common":{"name":"","role":"level","type":"boolean","read":true,"write":false,"def":false},"native":{"regType":"disInputs","address":0,"deviceId":1}}

@hg6806 sagte in Victron Smartmeter ET340 wie per RS485 auslesen:

Der Zähler hatte ich auch nur 1-phasig an ein Kabel angeschlossen. Vielleicht lag es auch daran.

möglich!
an welcher Phase denn? Die anderen sind dann natürlich 0

NEWS

Victron Smartmeter ET340 wie per RS485 auslesen

Victron Smartmeter ET340 wie per RS485 auslesen

Support us

580

32.4k

81.3k

1.3m