Weihnachtsangebot 2025! 🎄

[Trixx]

@luapsi
Hi !

Sorry for the long delay. I had some stuff going on that I needed to handle first...
I've created a new build that has an option to enable the EPM api call, there's also an option to enable logging for this call.
Could you try this version, enable the logging and send me a copy of the logging for the api call ?
With that I should be able to map the values you requested.

Edit; I've also added an option to send (anonymous) stacktraces of any errors that occur. This is completely opt-in and not required.

Happy holidays !

Regards,
Trixx

[M T]

Hallo

Können sie bitte einen Bild hochladen welche Einstellung bei der App und welche Angaben wo eingesetzt werden

@schneider_helmut said in New Adapter - Soliscloud:

@trixx

Thank you. Everything works great now. Grate job! I waited over a year for a Solis adapter for IO Broker because I wasn't able to use the Solis API myself.
Perhaps it would be important to mention that for "Station/Plant ID" you do not have to enter the ID "1668XX" from the Soli portal as expected, but rather the id from the browser address while you are logged in to your solis account "https://www.soliscloud.com/#/station/stationdetail_1?id=12984919194490002YY". "Station/Plant ID" must be entered here "12984919194490002YY".

[mcm1957]

@m-t said in New Adapter - Soliscloud:

Hallo

Können sie bitte einen Bild hochladen .........

This is the english section of the forum. Please use english language only. If you want to discuss a problem in german, pleae use german area.

[M T]

Can you give me a screenshot of the app settings? how to enter the data

@mcm57 said in New Adapter - Soliscloud:

@m-t said in New Adapter - Soliscloud:

Hallo

Können sie bitte einen Bild hochladen .........

This is the english section of the forum. Please use english language only. If you want to discuss a problem in german, pleae use german area.

[M T]

Can you tell me what data I need to enter??
@m-t said in New Adapter - Soliscloud:

Hallo

Können sie bitte einen Bild hochladen welche Einstellung bei der App und welche Angaben wo eingesetzt werden

@schneider_helmut said in New Adapter - Soliscloud:

@trixx

Thank you. Everything works great now. Grate job! I waited over a year for a Solis adapter for IO Broker because I wasn't able to use the Solis API myself.
Perhaps it would be important to mention that for "Station/Plant ID" you do not have to enter the ID "1668XX" from the Soli portal as expected, but rather the id from the browser address while you are logged in to your solis account "https://www.soliscloud.com/#/station/stationdetail_1?id=12984919194490002YY". "Station/Plant ID" must be entered here "12984919194490002YY".

[mcm1957]

@m-t
Did you follow the instructions at README.md (https://github.com/Trixx34/ioBroker.SolisCloud?tab=readme-ov-file#soliscloud-adapter-for-iobroker) ? Looks like that getting the required data is decribed there.
What information do you miss in detail?

[M T]

I'm concerned about which data and where should I enter it?

@mcm57 said in New Adapter - Soliscloud:

@m-t
Did you follow the instructions at README.md (https://github.com/Trixx34/ioBroker.SolisCloud?tab=readme-ov-file#soliscloud-adapter-for-iobroker) ? Looks like that getting the required data is decribed there.
What information do you miss in detail?

[mcm1957]

@m-t
As your screenshot shows there is exactly one field for api key and one filed for the api secret at the first line.
Did you try to enter them there?

Or did I misunderstand your question.
What cocerns do you have?

[M T]

@mcm57 said in New Adapter - Soliscloud:

@m-t
As your screenshot shows there is exactly one field for api key and one filed for the api secret at the first line.
Did you try to enter them there?

Or did I misunderstand your question.
What cocerns do you have?

I use iobroker which data I have to enter where so that I can establish a connection

[Trixx]

@m-t

Hi!
What you show in your screenshot should work.
You will also need to add a specific interval that's used between each API call. (Between 45 & 1800 seconds).

Unrelated remark: I noticed I've left some test code in the last release that logs an error every time the api is polled. This will show "This is the error" in the logging. This can be ignored, I'll push a new version during the weekend that fixes this.

Regards,
T

[M T]

@trixx said in New Adapter - Soliscloud:

@m-t

Hi!
What you show in your screenshot should work.
You will also need to add a specific interval that's used between each API call. (Between 45 & 1800 seconds).

Unrelated remark: I noticed I've left some test code in the last release that logs an error every time the api is polled. This will show "This is the error" in the logging. This can be ignored, I'll push a new version during the weekend that fixes this.

Regards,
T

The connection is established! Excellent ! Can't you shorten the polling time by 0-1800?

[mcm1957]

@m-t
Cloud access MUST have a reasonable minimum Intervall. Otherwise cloud service might ve overliaded an access might be blocked for all ioBroker users. So a minimum of 0bis definitly too low and would not be accepted at repository.

[Luapsi]

@trixx
Thank you for the implementation and your commitment.
Update carried out.
My adapter version is 1.4.0.
What settings can I make to support you?

greeting

Luapsi

[gabylein]

Hy

installed it V1.4.1 - but getting no value from the cloud.
get this error

Instance:

Objects:

What is the right way to get the Information from the Cloud ?

greatings
gabylein

[Trixx]

@gabylein
Hi !
Do you see more info if you set the logging level to debug ? The configuration seems right.
It should show what is returned from the different api calls.

[gabylein]

Its running

all the time I call directly this link ..
https://www.soliscloud.com/#/station/inverter/inverterdetail?id=xxxxxxxxxxxxxxxxxxxxxxxx&stationId=xxxxxxxxxxxxxxxxxxx

there is a mistake * Station ID is not Inverter ID :-)

running now

gabylein

[meikel]

First of all, great work :+1: . The adapter works perfectly and provides reliable data.

If adjustments are made to the data points in the future, I would find the "total yield" value very interesting for further evaluations.

Regards

[Mirtl]

@Trixx

Is it possible for you to integrate these?

• iDC1 Current
• iDC2 Current
• iDC3 Current
• iCD4 Current
• uDC1 Voltage
• uDC2 Voltage
• uDC3 Voltage
• uDC4 Voltage
• pDC1 Power
• pDC2 Power
• pDC3 Power
• pDC4 Power

Thank you very much in advance!
Mirtl

[mcm1957]

@trixx
You archived the repo ioBroker.soliscloud.

Please let us lnow if hhe adapter is nonlonger worki g due tp some cganges at the solis website or if you just do not have time or interrest to makntain it any further.

If the later is valud please consider movi g itvinto iobroker-community-adapters.This wpukd ne only a few clicks for you. Transfer ownership of repo to me (mcm1957) would be sufficient. I can do the rest.

Thanks for your feedback
Mcm1956

Edit
https://github.com/iobroker-community-adapters/info?tab=readme-ov-file#ask-to-move-your-repository-to-iobroker-community-adapters

des ribes the steps to initiate a transfer

[Honnkoponko]

@Trixx

Is it possible to implement Inverter Control as on Home Assistant?

Energy Storage Control Switch
Overdischarge SOC
Force Charge SOC
Backup SOC

Or does anyone knows how to control and monitor those values via Iobroker?