Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Aphofis]

@mickym
Man kann sogar Das Licht trotzdessen einschalten wenn man Alexa nutzt.
Aber ich denke wenn man jetzt Alexa noch mit rein nimmt, das wenn man das Licht per Sprache aktiviert, das dann auch wenn keine Bewegung mehr erkannt wird dann der Timer läuft und das Licht nach 1 min aus geht. also die Bedingung über Alexa. Dazu müsste ja Alexa abgehorcht werden. Das wird dann vermutlich zu aufwendig!? Könnte man aber dann auch wiederrum für einen Digitalen Schalter nutzen also wenn Alexa zb in Routine Bad Licht an true ist soll die Steuerung mit Bewegung und Timer weiter laufen bis stimme die Routine wieder deaktiviert.
Der Datenpunkt für Bad Licht an wäre:

Bad licht an

in meinem Echo Show. Wenn man mehrere Alexa geräte hat, muss man dann natürlich alle routinen zu allen alexa geräten dazu nehmen.

[mickym]

@aphofis sagte in 2 Bewegungsmelder (Aqara) sollen einen Lampe schalten:

Aber ich denke wenn man jetzt Alexa noch mit rein nimmt, das wenn man das Licht per Sprache aktiviert, das dann auch wenn keine Bewegung mehr erkannt wird dann der Timer läuft und das Licht nach 1 min aus geht. also die Bedingung über Alexa. Dazu müsste ja Alexa abgehorcht werden. Das wird dann vermutlich zu aufwendig!?

Wieso wenn Du mit Alexa einschalten willst hängst Du es einfach an den EIngang der Trigger Node.

[Aphofis]

@mickym
Iwie will das nicht so ganz...

[
    {
        "id": "2e295f1c879e6af4",
        "type": "tab",
        "label": "Küche Bad Motion Timer",
        "disabled": false,
        "info": "",
        "env": []
    },
    {
        "id": "553c77a748e7869a",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 480,
        "y": 100,
        "wires": [
            [
                "2cbb19c25bdbf55d"
            ]
        ]
    },
    {
        "id": "63495a6198767abe",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 1140,
        "y": 100,
        "wires": [
            [
                "d0ddca612599b43c",
                "9dd1e1bc2bca9ade"
            ]
        ]
    },
    {
        "id": "c0e067dc71657cd6",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 520,
        "y": 520,
        "wires": [
            [
                "fdd6a8d770321ddf"
            ]
        ]
    },
    {
        "id": "51e1e3fc8f508df5",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 980,
        "y": 500,
        "wires": [
            [
                "e2da7a63d3c15673",
                "f34957801db99988",
                "3980458ba6d298ac",
                "a7ac79dac573570f"
            ]
        ]
    },
    {
        "id": "99a62a6f9b1c0c05",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 1140,
        "y": 100,
        "wires": [
            []
        ]
    },
    {
        "id": "b8f8997592b68e2c",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 900,
        "y": 240,
        "wires": [
            [
                "99a62a6f9b1c0c05"
            ]
        ]
    },
    {
        "id": "1ac75a0bc5ee3bc7",
        "type": "ioBroker in",
        "z": "2e295f1c879e6af4",
        "name": "Küche Motion",
        "attrname": "payload",
        "topic": "hue.0.Küche_Motion_Sensor.presence",
        "payloadType": "value",
        "onlyack": "",
        "func": "all",
        "gap": "",
        "fireOnStart": "false",
        "outFormat": "MQTT",
        "x": 110,
        "y": 440,
        "wires": [
            [
                "0c7f79f1670db831"
            ]
        ]
    },
    {
        "id": "f34957801db99988",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Küche Unterschrank links",
        "topic": "hue.0.Küche_Unterschr_Links.on",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1170,
        "y": 500,
        "wires": []
    },
    {
        "id": "e2da7a63d3c15673",
        "type": "debug",
        "z": "2e295f1c879e6af4",
        "name": "debug 2",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 1120,
        "y": 440,
        "wires": []
    },
    {
        "id": "08933b607402d98c",
        "type": "inject",
        "z": "2e295f1c879e6af4",
        "name": "",
        "props": [
            {
                "p": "payload"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "true",
        "payloadType": "str",
        "x": 130,
        "y": 500,
        "wires": [
            [
                "0c7f79f1670db831"
            ]
        ]
    },
    {
        "id": "3980458ba6d298ac",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Küche Unterschrank rechts",
        "topic": "sonoff.0.kueche_unterschrank_rechts.POWER",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1180,
        "y": 560,
        "wires": []
    },
    {
        "id": "a7ac79dac573570f",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Küche Decke",
        "topic": "tuya.0.bf36b7d083796c35e8gq51.1",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1130,
        "y": 620,
        "wires": []
    },
    {
        "id": "4c349095bd25378c",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Reinigung Status",
        "topic": "mihome-vacuum.1.info.state",
        "attrname": "roborock",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 590,
        "y": 60,
        "wires": [
            [
                "a95d63f2785aa847"
            ]
        ]
    },
    {
        "id": "4b318acc0eab7b1b",
        "type": "ioBroker in",
        "z": "2e295f1c879e6af4",
        "name": "Bad Motion",
        "attrname": "payload",
        "topic": "hue.0.Bad_Motion_Sensor.presence",
        "payloadType": "value",
        "onlyack": "",
        "func": "all",
        "gap": "",
        "fireOnStart": "false",
        "outFormat": "MQTT",
        "x": 90,
        "y": 40,
        "wires": [
            [
                "66e5680c9143f38f"
            ]
        ]
    },
    {
        "id": "9dd1e1bc2bca9ade",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Bad Decke",
        "topic": "sonoff.0.bad_deckenlampe.POWER",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1290,
        "y": 100,
        "wires": []
    },
    {
        "id": "d0ddca612599b43c",
        "type": "debug",
        "z": "2e295f1c879e6af4",
        "name": "debug 1",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 1280,
        "y": 60,
        "wires": []
    },
    {
        "id": "a0aaa672fbf892e5",
        "type": "inject",
        "z": "2e295f1c879e6af4",
        "name": "",
        "props": [
            {
                "p": "payload"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "true",
        "payloadType": "str",
        "x": 110,
        "y": 100,
        "wires": [
            [
                "66e5680c9143f38f"
            ]
        ]
    },
    {
        "id": "66e5680c9143f38f",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Bewegung erkannt?",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 340,
        "y": 80,
        "wires": [
            [
                "4c349095bd25378c",
                "553c77a748e7869a"
            ],
            [
                "553c77a748e7869a"
            ]
        ]
    },
    {
        "id": "a95d63f2785aa847",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Roborock nicht Status 5",
        "property": "roborock",
        "propertyType": "msg",
        "rules": [
            {
                "t": "neq",
                "v": "5",
                "vt": "num"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 1,
        "x": 930,
        "y": 60,
        "wires": [
            [
                "63495a6198767abe"
            ]
        ]
    },
    {
        "id": "2cbb19c25bdbf55d",
        "type": "trigger",
        "z": "2e295f1c879e6af4",
        "name": "Warte 1 Minute bevor false gesendet wird",
        "op1": "true",
        "op2": "false",
        "op1type": "bool",
        "op2type": "bool",
        "duration": "60",
        "extend": true,
        "overrideDelay": false,
        "units": "s",
        "reset": "true",
        "bytopic": "all",
        "topic": "topic",
        "outputs": 1,
        "x": 920,
        "y": 100,
        "wires": [
            [
                "63495a6198767abe"
            ]
        ]
    },
    {
        "id": "ded2386bc0ab0eb2",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Reinigung Status",
        "topic": "mihome-vacuum.1.info.state",
        "attrname": "roborock",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 590,
        "y": 480,
        "wires": [
            [
                "a72ab3c0be80704d"
            ]
        ]
    },
    {
        "id": "0c7f79f1670db831",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Bewegung erkannt?",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 340,
        "y": 500,
        "wires": [
            [
                "ded2386bc0ab0eb2",
                "c0e067dc71657cd6"
            ],
            [
                "c0e067dc71657cd6"
            ]
        ]
    },
    {
        "id": "a72ab3c0be80704d",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Roborock nicht Status 5",
        "property": "roborock",
        "propertyType": "msg",
        "rules": [
            {
                "t": "neq",
                "v": "5",
                "vt": "num"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 1,
        "x": 810,
        "y": 480,
        "wires": [
            [
                "51e1e3fc8f508df5"
            ]
        ]
    },
    {
        "id": "fdd6a8d770321ddf",
        "type": "trigger",
        "z": "2e295f1c879e6af4",
        "name": "Warte 1 Minute bevor false gesendet wird",
        "op1": "true",
        "op2": "false",
        "op1type": "bool",
        "op2type": "bool",
        "duration": "10",
        "extend": true,
        "overrideDelay": false,
        "units": "s",
        "reset": "true",
        "bytopic": "all",
        "topic": "topic",
        "outputs": 1,
        "x": 760,
        "y": 520,
        "wires": [
            [
                "51e1e3fc8f508df5"
            ]
        ]
    },
    {
        "id": "3d16cb434aa22482",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Bad licht an Alexa",
        "topic": "alexa2.0.Echo-Devices.G0913L06031202PA.Routines.d2b8b4a7-0faf-444d-be14-0e90a1db9e1e",
        "attrname": "Alexa",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 330,
        "y": 140,
        "wires": [
            [
                "2cbb19c25bdbf55d"
            ]
        ]
    },
    {
        "id": "d7b5fe24eb069f5c",
        "type": "inject",
        "z": "2e295f1c879e6af4",
        "name": "Digital true",
        "props": [
            {
                "p": "payload"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "true",
        "payloadType": "str",
        "x": 100,
        "y": 200,
        "wires": [
            [
                "506488975306ad6c"
            ]
        ]
    },
    {
        "id": "9e7ed5475aba6cfc",
        "type": "inject",
        "z": "2e295f1c879e6af4",
        "name": "Digital false",
        "props": [
            {
                "p": "payload"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "false",
        "payloadType": "str",
        "x": 90,
        "y": 260,
        "wires": [
            [
                "506488975306ad6c"
            ]
        ]
    },
    {
        "id": "58eac2439ec37bc9",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Bad licht an Digital",
        "topic": "0_userdata.0.Test_Schalter",
        "attrname": "Alexa",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 590,
        "y": 180,
        "wires": [
            [
                "2cbb19c25bdbf55d"
            ]
        ]
    },
    {
        "id": "cf9b1ba0a9977865",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Digital licht aus",
        "topic": "0_userdata.0.Test_Schalter",
        "attrname": "Alexa",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 600,
        "y": 240,
        "wires": [
            [
                "b8f8997592b68e2c"
            ]
        ]
    },
    {
        "id": "506488975306ad6c",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Digital Schalter",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 320,
        "y": 200,
        "wires": [
            [
                "58eac2439ec37bc9"
            ],
            [
                "cf9b1ba0a9977865"
            ]
        ]
    }
]

[mickym]

@aphofis Na ich weiss immer nicht welchen Flow Du nimmst. Dann musst Du halt alles in die Switch Node Bewegung erkannt schicken. Ich würde halt dann den Namen ändern in: Ist true.

Dann brauchst auch nicht den Digitalen Schalter, der obere Switch ist ja dann schon der digitale Schalter

Und anstelle der Alexa Node über einen Datenpunkt kannst ja den Flow direkt anschließen.

Spoiler

[
   {
       "id": "2e295f1c879e6af4",
       "type": "tab",
       "label": "Küche Bad Motion Timer",
       "disabled": false,
       "info": "",
       "env": []
   },
   {
       "id": "553c77a748e7869a",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 520,
       "y": 100,
       "wires": [
           [
               "2cbb19c25bdbf55d"
           ]
       ]
   },
   {
       "id": "63495a6198767abe",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 1180,
       "y": 100,
       "wires": [
           [
               "d0ddca612599b43c",
               "9dd1e1bc2bca9ade"
           ]
       ]
   },
   {
       "id": "c0e067dc71657cd6",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 520,
       "y": 520,
       "wires": [
           [
               "fdd6a8d770321ddf"
           ]
       ]
   },
   {
       "id": "51e1e3fc8f508df5",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 980,
       "y": 500,
       "wires": [
           [
               "e2da7a63d3c15673",
               "f34957801db99988",
               "3980458ba6d298ac",
               "a7ac79dac573570f"
           ]
       ]
   },
   {
       "id": "99a62a6f9b1c0c05",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 1180,
       "y": 100,
       "wires": [
           []
       ]
   },
   {
       "id": "452d47f9ceae897d",
       "type": "junction",
       "z": "2e295f1c879e6af4",
       "x": 200,
       "y": 220,
       "wires": [
           [
               "66e5680c9143f38f"
           ]
       ]
   },
   {
       "id": "1ac75a0bc5ee3bc7",
       "type": "ioBroker in",
       "z": "2e295f1c879e6af4",
       "name": "Küche Motion",
       "attrname": "payload",
       "topic": "hue.0.Küche_Motion_Sensor.presence",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "false",
       "outFormat": "MQTT",
       "x": 110,
       "y": 440,
       "wires": [
           [
               "0c7f79f1670db831"
           ]
       ]
   },
   {
       "id": "f34957801db99988",
       "type": "ioBroker out",
       "z": "2e295f1c879e6af4",
       "name": "Küche Unterschrank links",
       "topic": "hue.0.Küche_Unterschr_Links.on",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1170,
       "y": 500,
       "wires": []
   },
   {
       "id": "e2da7a63d3c15673",
       "type": "debug",
       "z": "2e295f1c879e6af4",
       "name": "debug 2",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 1120,
       "y": 440,
       "wires": []
   },
   {
       "id": "08933b607402d98c",
       "type": "inject",
       "z": "2e295f1c879e6af4",
       "name": "",
       "props": [
           {
               "p": "payload"
           }
       ],
       "repeat": "",
       "crontab": "",
       "once": false,
       "onceDelay": 0.1,
       "topic": "",
       "payload": "true",
       "payloadType": "str",
       "x": 130,
       "y": 500,
       "wires": [
           [
               "0c7f79f1670db831"
           ]
       ]
   },
   {
       "id": "3980458ba6d298ac",
       "type": "ioBroker out",
       "z": "2e295f1c879e6af4",
       "name": "Küche Unterschrank rechts",
       "topic": "sonoff.0.kueche_unterschrank_rechts.POWER",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1180,
       "y": 560,
       "wires": []
   },
   {
       "id": "a7ac79dac573570f",
       "type": "ioBroker out",
       "z": "2e295f1c879e6af4",
       "name": "Küche Decke",
       "topic": "tuya.0.bf36b7d083796c35e8gq51.1",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1130,
       "y": 620,
       "wires": []
   },
   {
       "id": "4c349095bd25378c",
       "type": "ioBroker get",
       "z": "2e295f1c879e6af4",
       "name": "Reinigung Status",
       "topic": "mihome-vacuum.1.info.state",
       "attrname": "roborock",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 630,
       "y": 60,
       "wires": [
           [
               "a95d63f2785aa847"
           ]
       ]
   },
   {
       "id": "4b318acc0eab7b1b",
       "type": "ioBroker in",
       "z": "2e295f1c879e6af4",
       "name": "Bad Motion",
       "attrname": "payload",
       "topic": "hue.0.Bad_Motion_Sensor.presence",
       "payloadType": "value",
       "onlyack": "",
       "func": "all",
       "gap": "",
       "fireOnStart": "false",
       "outFormat": "MQTT",
       "x": 90,
       "y": 40,
       "wires": [
           [
               "66e5680c9143f38f"
           ]
       ]
   },
   {
       "id": "9dd1e1bc2bca9ade",
       "type": "ioBroker out",
       "z": "2e295f1c879e6af4",
       "name": "Bad Decke",
       "topic": "sonoff.0.bad_deckenlampe.POWER",
       "ack": "false",
       "autoCreate": "false",
       "stateName": "",
       "role": "",
       "payloadType": "",
       "readonly": "",
       "stateUnit": "",
       "stateMin": "",
       "stateMax": "",
       "x": 1330,
       "y": 100,
       "wires": []
   },
   {
       "id": "d0ddca612599b43c",
       "type": "debug",
       "z": "2e295f1c879e6af4",
       "name": "debug 1",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 1320,
       "y": 60,
       "wires": []
   },
   {
       "id": "66e5680c9143f38f",
       "type": "switch",
       "z": "2e295f1c879e6af4",
       "name": "true/false ?",
       "property": "payload",
       "propertyType": "msg",
       "rules": [
           {
               "t": "true"
           },
           {
               "t": "false"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 390,
       "y": 80,
       "wires": [
           [
               "4c349095bd25378c",
               "553c77a748e7869a"
           ],
           [
               "553c77a748e7869a"
           ]
       ]
   },
   {
       "id": "a95d63f2785aa847",
       "type": "switch",
       "z": "2e295f1c879e6af4",
       "name": "Roborock nicht Status 5",
       "property": "roborock",
       "propertyType": "msg",
       "rules": [
           {
               "t": "neq",
               "v": "5",
               "vt": "num"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 1,
       "x": 970,
       "y": 60,
       "wires": [
           [
               "63495a6198767abe"
           ]
       ]
   },
   {
       "id": "2cbb19c25bdbf55d",
       "type": "trigger",
       "z": "2e295f1c879e6af4",
       "name": "Warte 1 Minute bevor false gesendet wird",
       "op1": "true",
       "op2": "false",
       "op1type": "bool",
       "op2type": "bool",
       "duration": "60",
       "extend": true,
       "overrideDelay": false,
       "units": "s",
       "reset": "true",
       "bytopic": "all",
       "topic": "topic",
       "outputs": 1,
       "x": 960,
       "y": 100,
       "wires": [
           [
               "63495a6198767abe"
           ]
       ]
   },
   {
       "id": "ded2386bc0ab0eb2",
       "type": "ioBroker get",
       "z": "2e295f1c879e6af4",
       "name": "Reinigung Status",
       "topic": "mihome-vacuum.1.info.state",
       "attrname": "roborock",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 590,
       "y": 480,
       "wires": [
           [
               "a72ab3c0be80704d"
           ]
       ]
   },
   {
       "id": "0c7f79f1670db831",
       "type": "switch",
       "z": "2e295f1c879e6af4",
       "name": "Bewegung erkannt?",
       "property": "payload",
       "propertyType": "msg",
       "rules": [
           {
               "t": "true"
           },
           {
               "t": "false"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 340,
       "y": 500,
       "wires": [
           [
               "ded2386bc0ab0eb2",
               "c0e067dc71657cd6"
           ],
           [
               "c0e067dc71657cd6"
           ]
       ]
   },
   {
       "id": "a72ab3c0be80704d",
       "type": "switch",
       "z": "2e295f1c879e6af4",
       "name": "Roborock nicht Status 5",
       "property": "roborock",
       "propertyType": "msg",
       "rules": [
           {
               "t": "neq",
               "v": "5",
               "vt": "num"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 1,
       "x": 810,
       "y": 480,
       "wires": [
           [
               "51e1e3fc8f508df5"
           ]
       ]
   },
   {
       "id": "fdd6a8d770321ddf",
       "type": "trigger",
       "z": "2e295f1c879e6af4",
       "name": "Warte 1 Minute bevor false gesendet wird",
       "op1": "true",
       "op2": "false",
       "op1type": "bool",
       "op2type": "bool",
       "duration": "10",
       "extend": true,
       "overrideDelay": false,
       "units": "s",
       "reset": "true",
       "bytopic": "all",
       "topic": "topic",
       "outputs": 1,
       "x": 760,
       "y": 520,
       "wires": [
           [
               "51e1e3fc8f508df5"
           ]
       ]
   },
   {
       "id": "3d16cb434aa22482",
       "type": "ioBroker get",
       "z": "2e295f1c879e6af4",
       "name": "Bad licht an Alexa",
       "topic": "alexa2.0.Echo-Devices.G0913L06031202PA.Routines.d2b8b4a7-0faf-444d-be14-0e90a1db9e1e",
       "attrname": "Alexa",
       "payloadType": "value",
       "errOnInvalidState": "nothing",
       "x": 110,
       "y": 120,
       "wires": [
           [
               "66e5680c9143f38f"
           ]
       ]
   },
   {
       "id": "d7b5fe24eb069f5c",
       "type": "inject",
       "z": "2e295f1c879e6af4",
       "name": "Digital true",
       "props": [
           {
               "p": "payload"
           }
       ],
       "repeat": "",
       "crontab": "",
       "once": false,
       "onceDelay": 0.1,
       "topic": "",
       "payload": "true",
       "payloadType": "str",
       "x": 100,
       "y": 200,
       "wires": [
           [
               "452d47f9ceae897d"
           ]
       ]
   },
   {
       "id": "9e7ed5475aba6cfc",
       "type": "inject",
       "z": "2e295f1c879e6af4",
       "name": "Digital false",
       "props": [
           {
               "p": "payload"
           }
       ],
       "repeat": "",
       "crontab": "",
       "once": false,
       "onceDelay": 0.1,
       "topic": "",
       "payload": "false",
       "payloadType": "str",
       "x": 90,
       "y": 260,
       "wires": [
           [
               "452d47f9ceae897d"
           ]
       ]
   }
]

Und wenn Du für die anderen kein Überprüfung des Staubis haben willst, dann nimm den anderen Flow.

[Aphofis]

@mickym
Ne das will nicht!
hab einen Test Schalter Datenpunkt auf den die Steuerung laufen soll und bei Schalter false soll
auch sofort das Licht aus gehen.
By the way wie erstellst du diese Knotenpunkte ?

[mickym]

@aphofis Na dann wenn true und false sofort schalten soll, dann würde ich nur die iobroker-Out Node anschließen.

[mickym]

@aphofis sagte in 2 Bewegungsmelder (Aqara) sollen einen Lampe schalten:

By the way wie erstellst du diese Knotenpunkte ?

Rechte Maustaste:

[Aphofis]

@mickym
So klappt es!
Es muss nicht die Timer Steuerung wenn man den Digital Lichtschalter benutzt. Dann kann man per Lichtschalter sofort abschalten oder per alexa abschalten. Wenn Alexa oder Schalter ist man ja eh physisch zu hause.

[
    {
        "id": "2e295f1c879e6af4",
        "type": "tab",
        "label": "Bad Motion Timer",
        "disabled": false,
        "info": "",
        "env": []
    },
    {
        "id": "553c77a748e7869a",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 740,
        "y": 100,
        "wires": [
            [
                "2cbb19c25bdbf55d"
            ]
        ]
    },
    {
        "id": "63495a6198767abe",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 1180,
        "y": 100,
        "wires": [
            [
                "9dd1e1bc2bca9ade",
                "d0ddca612599b43c"
            ]
        ]
    },
    {
        "id": "99a62a6f9b1c0c05",
        "type": "junction",
        "z": "2e295f1c879e6af4",
        "x": 1180,
        "y": 100,
        "wires": [
            []
        ]
    },
    {
        "id": "4c349095bd25378c",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Reinigung Status",
        "topic": "mihome-vacuum.1.info.state",
        "attrname": "roborock",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 810,
        "y": 60,
        "wires": [
            [
                "a95d63f2785aa847"
            ]
        ]
    },
    {
        "id": "4b318acc0eab7b1b",
        "type": "ioBroker in",
        "z": "2e295f1c879e6af4",
        "name": "Bad Motion",
        "attrname": "payload",
        "topic": "hue.0.Bad_Motion_Sensor.presence",
        "payloadType": "value",
        "onlyack": "",
        "func": "all",
        "gap": "",
        "fireOnStart": "false",
        "outFormat": "MQTT",
        "x": 90,
        "y": 40,
        "wires": [
            [
                "66e5680c9143f38f"
            ]
        ]
    },
    {
        "id": "9dd1e1bc2bca9ade",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Bad Decke",
        "topic": "sonoff.0.bad_deckenlampe.POWER",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1290,
        "y": 100,
        "wires": []
    },
    {
        "id": "d0ddca612599b43c",
        "type": "debug",
        "z": "2e295f1c879e6af4",
        "name": "debug 1",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 1280,
        "y": 60,
        "wires": []
    },
    {
        "id": "a0aaa672fbf892e5",
        "type": "inject",
        "z": "2e295f1c879e6af4",
        "name": "",
        "props": [
            {
                "p": "payload"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "payload": "true",
        "payloadType": "str",
        "x": 110,
        "y": 100,
        "wires": [
            [
                "66e5680c9143f38f"
            ]
        ]
    },
    {
        "id": "66e5680c9143f38f",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Bewegung erkannt?",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 580,
        "y": 60,
        "wires": [
            [
                "4c349095bd25378c",
                "553c77a748e7869a"
            ],
            [
                "553c77a748e7869a"
            ]
        ]
    },
    {
        "id": "a95d63f2785aa847",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Roborock nicht Status 5",
        "property": "roborock",
        "propertyType": "msg",
        "rules": [
            {
                "t": "neq",
                "v": "5",
                "vt": "num"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 1,
        "x": 1030,
        "y": 60,
        "wires": [
            [
                "63495a6198767abe"
            ]
        ]
    },
    {
        "id": "2cbb19c25bdbf55d",
        "type": "trigger",
        "z": "2e295f1c879e6af4",
        "name": "Warte 1 Minute bevor false gesendet wird",
        "op1": "true",
        "op2": "false",
        "op1type": "bool",
        "op2type": "bool",
        "duration": "10",
        "extend": true,
        "overrideDelay": false,
        "units": "s",
        "reset": "true",
        "bytopic": "all",
        "topic": "topic",
        "outputs": 1,
        "x": 980,
        "y": 100,
        "wires": [
            [
                "63495a6198767abe"
            ]
        ]
    },
    {
        "id": "3d16cb434aa22482",
        "type": "ioBroker get",
        "z": "2e295f1c879e6af4",
        "name": "Bad licht an Alexa",
        "topic": "alexa2.0.Echo-Devices.G0913L06031202PA.Routines.d2b8b4a7-0faf-444d-be14-0e90a1db9e1e",
        "attrname": "Alexa",
        "payloadType": "value",
        "errOnInvalidState": "nothing",
        "x": 110,
        "y": 140,
        "wires": [
            [
                "66e5680c9143f38f"
            ]
        ]
    },
    {
        "id": "fc25cbeee0cad617",
        "type": "ioBroker out",
        "z": "2e295f1c879e6af4",
        "name": "Bad Decke",
        "topic": "sonoff.0.bad_deckenlampe.POWER",
        "ack": "false",
        "autoCreate": "false",
        "stateName": "",
        "role": "",
        "payloadType": "",
        "readonly": "",
        "stateUnit": "",
        "stateMin": "",
        "stateMax": "",
        "x": 1290,
        "y": 220,
        "wires": []
    },
    {
        "id": "4961b7defde8b1ea",
        "type": "ioBroker in",
        "z": "2e295f1c879e6af4",
        "name": "Schalter Digital",
        "attrname": "payload",
        "topic": "0_userdata.0.Test_Schalter",
        "payloadType": "value",
        "onlyack": "",
        "func": "all",
        "gap": "",
        "fireOnStart": "false",
        "outFormat": "MQTT",
        "x": 120,
        "y": 200,
        "wires": [
            [
                "a6f995c7f01c5cc0"
            ]
        ]
    },
    {
        "id": "a6f995c7f01c5cc0",
        "type": "switch",
        "z": "2e295f1c879e6af4",
        "name": "Switch true/false",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "true"
            },
            {
                "t": "false"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 2,
        "x": 1080,
        "y": 200,
        "wires": [
            [
                "fc25cbeee0cad617",
                "8abca0bad942f182"
            ],
            [
                "fc25cbeee0cad617",
                "8abca0bad942f182"
            ]
        ]
    },
    {
        "id": "8abca0bad942f182",
        "type": "debug",
        "z": "2e295f1c879e6af4",
        "name": "debug 9",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "false",
        "statusVal": "",
        "statusType": "auto",
        "x": 1280,
        "y": 180,
        "wires": []
    }
]

Hoffe das ist programmier technisch so korrekt.

[mickym]

@aphofis Nein der switch ist doch überflüssig, wenn du sowohl true und false an die iobroker-Out Node schickst. Lösch die.

[Aphofis]

Hab da moch so einige Wemos Mini einige Netzteile die in eine Lichtschalter Unterputzdose reinpassen. muss dann nur noch blenden mit digital taster (Button) finden dann kann das Projekt Digital Schalter los gehen. Erstmal nur Küche und Bad.

[mickym]

@aphofis Ja aber Du musst verstehen was Du machst. Ein Switch der nach Nachrichten aufteilt und beides wieder in eine Node schickt ist unsinnig

[Aphofis]

@mickym
Also dann nur so !?

[mickym]

@aphofis genau - Du kopierst quasi den Inhalt Deines digitalen Schalters in den Steuerungsdatenpunkt Deiner Lampe.

Jetzt stellt sich natürlich die Frage, warum Du diesen digitalen Schalter brauchst und nicht direkt die Lampe steuerst. ? ;)

[Aphofis]

@mickym
Perfekt.! Funktioniert soweit auch.
Mach das dann aber doch mit Digital Glas Touch Schaltern mit Tuya.
Nun verrate doch mal wie du die Knotenpunkte erstellst

[Aphofis]

@mickym
Weil ich noch normale Lichtschalter habe wenn diese betätigt werden sind auch die Geräte offline. Weil diese noch mit Nullleiter arbeiten. Dh Schalter aus Gerät offline wenn nachher die Neuen Tuya Lichtschalter da sind die arbeiten ohen Nullleiter. Dann sind die Schalter immer erreichbar und sehen dazu auch noch schick aus.
Die Geräte die ich verbaut hatte liegen in der Zwischendecke und sind von der Phase des Lichtschalters abhängig.

[mickym]

@mickym sagte in 2 Bewegungsmelder (Aqara) sollen einen Lampe schalten:

Mach das dann aber doch mit Digital Glas Touch Schaltern mit Tuya.

Nun warum nimmst Du dann nicht den Tuya Datenpunkt und schaltest damit Dein Licht? - Warum braucht es diesen Zwischenpunkt?

Nun verrate doch mal wie du die Knotenpunkte erstellst

Hab ich doch: https://forum.iobroker.net/post/1190282

[Aphofis]

@mickym
In den Lichtschalter Unterputzdosen ist nicht so viel Platz um da ein Shelly Tuya etc einzubauen.
Hätte ich dann ja über die normalen Lichtschalter realisieren können. Aber extra tiefe Unterputzdosen einarbeiten ist mir für eine Mietwohnung dann doch zu viel. Sollte ich hier ausziehen, nehme ich ja alles mit.

[Aphofis]

Sorry hab ich überlesen! Super die Knotenpunkte sind echt was tolles um die verdrahtung besser zu sehen.

[mickym]

@aphofis Das mag alles sein. Mir geht es nicht um die Hardware - wie steuerst Du denn diesen Digitalen Schalter Datenpunkt an??

[Aphofis]

@mickym
Naja die Tuya Schalter sind per Adapter verbunden und wenn man auf den Touch Button drückt geht der Datenpunkt in true wenn man noch mal tippt geht er false.
Die Lichtschalter sind ja per Tuya Adapter verbunden.
Also wenn ich die Frage richtig verstanden habe.