UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@emil70

Und das ist ein Multihost-System?

[emil70]

@thomas-braun sagte in iob diag - Skript:

@emil70

Und das ist ein Multihost-System?

Nein, wollte damit nur mitteilen, das bei mir weniger steht als bei dir. So wie ich das verstanden habe hast du auch kein Mutihorst

[wendy2702]

@thomas-braun JS 4.0.24

Admin 6.4.3

[Thomas Braun]

@emil70 sagte in iob diag - Skript:

Nein, wollte damit nur mitteilen, das bei mir weniger steht als bei dir.

Das ist klar, mit dem grep wird ja auch nur die interessante Zeile aus dem ganzen Wust an Informationen rausgepickt. Wenn du dir die vollständige Version von iobroker status all anschaust wird da auch mehr stehen.

Die Frage ist mehr, warum bei @wendy2702 gar keine Werte dazu auffindbar sind.

[Thomas Braun]

@wendy2702

Ist ja aktueller Stand.
Ich frickel hier mit js-controller 5.0.1-alpha.0-20230406-4552d569 herum.
Ist das etwa damit erst eingeführt worden?

[wendy2702]

@thomas-braun mal auf einem Slave ausgeführt kommt die Multihost Info

pi@pi-iobroker:~ $ iob status all
iobroker is running on this host.

At least one iobroker host is running.

Instance "admin.0" is running
Instance "admin.1" is running
Instance "admin.2" is not running
Instance "daswetter.0" is not running
Instance "dwd.0" is not running
Instance "email.0" is running
Instance "enigma2.0" is running
Instance "feiertage.0" is not running
Instance "flot.0" is not running
Instance "fritzbox.0" is running
Instance "harmony.0" is running
Instance "history.0" is running
Instance "hm-rega.0" is running
Instance "hm-rpc.0" is running
Instance "hm-rpc.1" is running
Instance "hm-rpc.2" is running
Instance "hue.0" is running
Instance "ical.0" is not running
Instance "ical.1" is not running
Instance "ical.2" is not running
Instance "icons-addictive-flavour-png.0" is not running
Instance "icons-fatcow-hosting.0" is not running
Instance "icons-icons8.0" is not running
Instance "icons-material-png.0" is not running
Instance "icons-material-svg.0" is not running
Instance "icons-mfd-png.0" is not running
Instance "icons-mfd-svg.0" is not running
Instance "icons-open-icon-library-png.0" is not running
Instance "icons-ultimate-png.0" is not running
Instance "javascript.0" is running
Instance "javascript.1" is running
Instance "javascript.2" is running
Instance "js2fs.0" is not running
Instance "modbus.0" is running
Instance "modbus.2" is running
Instance "modbus.3" is running
Instance "modbus.4" is not running
Instance "musiccast.0" is not running
Instance "nut.0" is not running
Instance "ping.0" is running
Instance "rpi2.0" is not running
Instance "rpi2.1" is not running
Instance "sayit.0" is running
Instance "simple-api.0" is running
Instance "smartmeter.0" is running
Instance "tankerkoenig.0" is running
Instance "telegram.0" is running
Instance "tr-064.0" is not running
Instance "vis-bars.0" is not running
Instance "vis-canvas-gauges.0" is not running
Instance "vis-colorpicker.0" is not running
Instance "vis-fancyswitch.0" is not running
Instance "vis-google-fonts.0" is not running
Instance "vis-hqwidgets.0" is not running
Instance "vis-jqui-mfd.0" is not running
Instance "vis-justgage.0" is not running
Instance "vis-keyboard.0" is not running
Instance "vis-metro.0" is not running
Instance "vis-plumb.0" is not running
Instance "vis-rgraph.0" is not running
Instance "vis-timeandweather.0" is not running
Instance "vis.0" is not running
Instance "weatherunderground.0" is not running
Instance "web.0" is running
Instance "yahka.0" is running
Instance "yahka.1" is running
Instance "yamaha.0" is running
Instance "yr.0" is not running
Instance "yahka.2" is running
Instance "trashschedule.0" is running
Instance "vis-material-webfont.0" is not running
Instance "vis-materialdesign.0" is not running
Instance "vis-material.0" is not running
Instance "influxdb.0" is running
Instance "vis-inventwo.0" is running
Instance "vis-icontwo.0" is not running
Instance "yahka.3" is not running
Instance "homeconnect.0" is not running
Instance "hue-extended.0" is not running
Instance "linux-control.0" is running
Instance "yahka.4" is running
Instance "socketio.0" is running
Instance "birthdays.0" is not running
Instance "birthdays.1" is not running
Instance "pushover.0" is not running
Instance "alias-manager.0" is not running
Instance "discovery.0" is not running
Instance "net-tools.0" is not running
Instance "sayit.1" is not running
Instance "modbus.5" is running
Instance "enocean.0" is running
Instance "modbus.1" is running
Instance "shuttercontrol.0" is running
Instance "energiefluss.0" is running
Instance "ws.0" is running
Instance "web.1" is running
Instance "backitup.0" is not running
Instance "modbus.6" is not running
Instance "shelly.0" is running
Instance "sourceanalytix.0" is running
Instance "roborock.0" is not running
Instance "vis-2-beta.0" is running
Instance "vis-2-widgets-material.0" is not running
Instance "vis-2-widgets-energy.0" is not running
Instance "vis-2-widgets-gauges.0" is not running
Instance "smartstate.0" is running
Instance "smartmeter.1" is not running
Instance "energiefluss.1" is not running

SYSTEM/memoryLimitMB: 0
SYSTEM/hostname:
SYSTEM/statisticsInterval: 15000
SYSTEM/checkDiskInterval: 300000
SYSTEM/instanceStartInterval: 2000
SYSTEM/compact: false
SYSTEM/allowShellCommands: false
SYSTEM/memLimitWarn: 100
SYSTEM/memLimitError: 50
MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password:
OBJECTS/type: jsonl
OBJECTS/host: 192.168.178.18
OBJECTS/port: 9001
OBJECTS/noFileCache: false
OBJECTS/maxQueue: 1000
OBJECTS/connectTimeout: 5000
OBJECTS/writeFileInterval: 5000
OBJECTS/OPTIONS/retry_max_count: 19
OBJECTS/OPTIONS/db: 0
OBJECTS/OPTIONS/family: 0
OBJECTS/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError && ignoreErrors) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            } else {
                return retry_max_delay;
            }
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
OBJECTS/OPTIONS/enableReadyCheck: true
OBJECTS/OPTIONS/host: 192.168.178.18
OBJECTS/OPTIONS/port: 9001
OBJECTS/OPTIONS/autoResubscribe: false
OBJECTS/OPTIONS/connectionName:
OBJECTS/BACKUP/disabled: false
OBJECTS/BACKUP/files: 24
OBJECTS/BACKUP/hours: 48
OBJECTS/BACKUP/period: 120
OBJECTS/BACKUP/path:
STATES/type: jsonl
STATES/host: 192.168.178.18
STATES/port: 9000
STATES/connectTimeout: 5000
STATES/writeFileInterval: 30000
STATES/OPTIONS/retry_max_count: 19
STATES/OPTIONS/db: 0
STATES/OPTIONS/family: 0
STATES/OPTIONS/retryStrategy: reconnectCount => {
            if (!ready && initError) {
                return new Error('No more tries');
            }
            if (this.stop) {
                return new Error('Client has stopped ... no retries anymore');
            }
            if (ready && reconnectCount >= retry_max_count) {
                return new Error('Stop trying to reconnect');
            }
            // A function that receives an options object as parameter including the retry attempt,
            // the total_retry_time indicating how much time passed since the last time connected,
            // the error why the connection was lost and the number of times_connected in total.
            // If you return a number from this function, the retry will happen exactly after that
            // time in milliseconds. If you return a non-number, no further retry will happen and
            // all offline commands are flushed with errors. Return an error to return that
            // specific error to all offline commands.

            if (!ready) {
                return 300;
            }
            return retry_max_delay;
            /*if (options.error.code === 'ECONNREFUSED') {
                // End reconnecting on a specific error and flush all commands with a individual error
                return new Error('The server refused the connection');
            }
            if (options.total_retry_time > 1000 * 60 * 60) {
                // End reconnecting after a specific timeout and flush all commands with a individual error
                return new Error('Retry time exhausted');
            }
            if (options.times_connected > 10) {
                // End reconnecting with built in error
                return undefined;
            }
            // reconnect after
            return Math.max(options.attempt * 100, 3000);*/
        }
STATES/OPTIONS/enableReadyCheck: true
STATES/OPTIONS/host: 192.168.178.18
STATES/OPTIONS/port: 9000
STATES/OPTIONS/autoResubscribe: false
STATES/OPTIONS/connectionName:
STATES/BACKUP/disabled: false
STATES/BACKUP/files: 24
STATES/BACKUP/hours: 48
STATES/BACKUP/period: 120
STATES/BACKUP/path:
STATES/maxQueue: 1000
LOG/level: info
LOG/maxDays: 7
LOG/noStdout: true
LOG/TRANSPORT/FILE1/type: file
LOG/TRANSPORT/FILE1/enabled: true
LOG/TRANSPORT/FILE1/filename: log/iobroker
LOG/TRANSPORT/FILE1/fileext: .log
LOG/TRANSPORT/SYSLOG1/type: syslog
LOG/TRANSPORT/SYSLOG1/enabled: false
LOG/TRANSPORT/SYSLOG1/host: localhost
LOG/TRANSPORT/SYSLOG1/protocol: udp4
LOG/TRANSPORT/SYSLOG1/localhost: iobroker
LOG/TRANSPORT/SEQ1/type: seq
LOG/TRANSPORT/SEQ1/enabled: false
LOG/TRANSPORT/SEQ1/serverUrl: http://IP:PORT
LOG/TRANSPORT/SEQ1/apiKey:
dataDir: ../../iobroker-data/

[bahnuhr]

@wendy2702
Warum hast du 3 admin ?
Nur mal so zur Info.

[Thomas Braun]

@wendy2702

Aber auch mit false.
Schade, ich hatte gedacht/erwartet, man könnte damit ein Multihost-Setup erkennen.

[wendy2702]

@bahnuhr historisch gewachsen da es früher mal drei einzelne Installation waren.

@Thomas-Braun : ja, merkwürdig das da false steht.

[bahnuhr]

@thomas-braun
@wendy2702

habe auch ein multihost
Und bei mir steht auch false

MULTIHOSTSERVICE/enabled: false
MULTIHOSTSERVICE/secure: true
MULTIHOSTSERVICE/password: $/aes-192-cbc:08dab1f
MULTIHOSTSERVICE/persist: false

[Thomas Braun]

@bahnuhr @wendy2702 @emil70
Danke fürs nachschauen.

Aber so kann ich den Punkt für iob diag leider nicht brauchen. Muss ich mal nach was anderem schauen.

[haselchen]

@thomas-braun

Habs in Docker in nem Container auch mal laufen lassen.

Wird auch false angezeigt, obwohl es ein Multihostsystem ist.

[Thomas Braun]

@haselchen

Ja, der Code funktioniert nicht. Ist im github auch schon wieder verschwunden.

[haselchen]

@thomas-braun

Feilst Du da noch einer Lösung ?

[Thomas Braun]

@haselchen

Im Moment sehe ich keine Möglichkeit das verlässlich abzugreifen. Vor allen Dingen nicht von 'extern' über ein bash-skript.

[haselchen]

@thomas-braun

Lustigerweise, ich weiss ja nicht ob meine Vorredner da nachgesehen haben,
steht in der iobroker.json das schon falsch drin.

"multihostService": {
    "enabled": false,
    "secure": true,

[Thomas Braun]

@haselchen
Ja, das dürfte die Ursache dafür sein. Also grundsätzlich funktioniert der Abruf der Info schon, nur ist die Info selber falsch.

[haselchen]

@thomas-braun

Ich kann da ja mal true reinballern und sehen was dein Skript macht.
Die Frage ist, wer korrigiert den Fehler in der iobroker.json?

[fastfoot]

es gibt auch noch den Befehl iob multihost status

[Thomas Braun]

@fastfoot

Okay, ich greppe im Skript danach.

iobroker status all | grep MULTIHOSTSERVICE/enabled

vielleicht kann @haselchen mal beides auf seinem Multihost-System ausführen?

iob multihost status