Neues YouTube-Video: Visualisierung im Devices-Adapter

[Meister Mopper]

@ilovegym Diese Fehlermeldung bekomme ich, wenn ich meine aufwändige vis über cloud.0 aufrufe.

[qqolli]

@ilovegym

Was z. Zt. recht heftig ist, ist der upnp.0 (ein paar Mal jede Sekunde). Könnte das ein Grund sein?:

upnp.0
2021-08-13 10:59:33.107	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.Layer1DownstreamMaxBitRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:33.081	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:33.028	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:33.012	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.960	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.942	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.TotalBytesSent" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.889	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.TotalBytesReceived" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.871	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.AutoDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.814	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.IdleDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.752	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.UpnpControlEnabled" has to be type "boolean" but received type "string"

upnp.0
2021-08-13 10:59:32.696	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.RoutedBridgedModeBoth" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.212	info	State value to set for "upnp.0.WANConnectionDevice_-_FRITZ!Box_7490.WANDevice.WANConnectionDevice.WANIPConnection.Uptime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.172	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.Layer1UpstreamMaxBitRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.119	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.Layer1DownstreamMaxBitRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.092	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.034	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.021	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:32.007	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:31.994	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.TotalBytesSent" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:31.936	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.TotalBytesReceived" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:31.922	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.AutoDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:31.862	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.IdleDisconnectTime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:31.755	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.UpnpControlEnabled" has to be type "boolean" but received type "string"

upnp.0
2021-08-13 10:59:31.735	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.RoutedBridgedModeBoth" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:29.039	info	State value to set for "upnp.0.WANConnectionDevice_-_FRITZ!Box_7490.WANDevice.WANConnectionDevice.WANIPConnection.Uptime" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.936	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.Layer1UpstreamMaxBitRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.920	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.Layer1DownstreamMaxBitRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.832	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.818	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.ByteReceiveRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.804	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketSendRate" has to be type "number" but received type "string"

upnp.0
2021-08-13 10:59:28.747	info	State value to set for "upnp.0.WANDevice_-_FRITZ!Box_7490.WANDevice.WANCommonInterfaceConfig.PacketReceiveRate" has to be type "number" but received type "string"

[Ein ehemaliger Benutzer]

@qqolli ja warum pollt der so oft, ist doch nicht notwendig oder normal..???
schalt ihn doch mal ab, wenn es dann geht, weisst du, was los ist..

[qqolli]

@ilovegym

Hab den upnp.0 einfach mal angehalten, aber trotzdem immer noch:

cloud.0
2021-08-13 11:23:42.441	info	Adapter redirected temporally to "https://iobroker.pro:10556" in 30 seconds. Reason: command from server

cloud.0
2021-08-13 11:23:42.416	info	Connection changed: connect

cloud.0
2021-08-13 11:23:42.305	info	Trying to connect as system.user.admin

cloud.0
2021-08-13 11:23:42.124	info	Connecting with https://iobroker.pro:10555 with "@pro_xxx"

cloud.0
2021-08-13 11:23:41.747	info	starting. Version 4.1.0 in /opt/iobroker/node_modules/iobroker.cloud, node: v12.22.4, js-controller: 3.3.15

cloud.0
2021-08-13 11:23:37.252	warn	Terminated (-100): Without reason

cloud.0
2021-08-13 11:23:27.249	info	Restart adapter by disconnect

cloud.0
2021-08-13 11:23:27.248	info	Connection lost

cloud.0
2021-08-13 11:23:27.248	info	Connection changed: io client disconnect

cloud.0
2021-08-13 11:23:27.246	error	Sending to many events. Account is blocked for 5 minutes. Please restart cloud adapter.

cloud.0
2021-08-13 11:23:27.225	info	Connection changed: connect

cloud.0
2021-08-13 11:23:27.137	info	Trying to connect as system.user.admin

cloud.0
2021-08-13 11:22:57.090	info	Adapter redirected temporally to "https://iobroker.pro:10556" in 30 seconds. Reason: command from server

cloud.0
2021-08-13 11:22:57.064	info	Connection changed: connect

cloud.0
2021-08-13 11:22:56.955	info	Trying to connect as system.user.admin

cloud.0
2021-08-13 11:22:56.770	info	Connecting with https://iobroker.pro:10555 with "@pro_xxx"

cloud.0
2021-08-13 11:22:56.377	info	starting. Version 4.1.0 in /opt/iobroker/node_modules/iobroker.cloud, node: v12.22.4, js-controller: 3.3.15

cloud.0
2021-08-13 11:22:49.073	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

cloud.0
2021-08-13 11:22:49.070	info	terminating

cloud.0
2021-08-13 11:22:49.068	info	Got terminate signal TERMINATE_YOURSELF

[Ein ehemaliger Benutzer]

@qqolli Mal 10 Minuten warten, bis der Account wieder frei ist..
noch mehr so Instanzen am laufen??

[Homoran]

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

aber trotzdem immer noch:

So schnell wirst du wohl noch nicht wieder freigeschaltet worden sein

[qqolli]

@homoran

Na ja, 24 Stunden später nochmal versucht (sollte genug Zeit gewesen sein zum freischalten):

cloud.0
2021-08-15 13:38:17.240	error	Cloud says: Too many updates or requests

cloud.0
2021-08-15 13:38:17.237	error	Cloud says: Too many updates or requests

cloud.0
2021-08-15 13:38:17.235	error	Cloud says: Too many updates or requests

Und es gibt zumindest in den Protokollen keinen Prozess (mehr), der zu einem Überlauf führen könnte.

[Ein ehemaliger Benutzer]

@qqolli Hast du den Cloud adapter auch mal ein paar Minuten gestoppt, damit wirklich nichts mehr geschickt wird.. ?`?

Oder ist der die ganze Zeit mitgelaufen??

[qqolli]

@ilovegym

Nein, hatte ich nicht gemacht. Mach ich aber gleich mal und berichte dann.

[Ein ehemaliger Benutzer]

@qqolli jo, solange dein System dauernd da soviel Zeugs hinballert ist der Account dicht, da hilft nur, schauen, warum das so ist und ob das so sein muss, also Adapter logfiles debuggen und natuerlich erstmal den Account wieder leben lassen.

Musst halt alle Adapter mal durchgehen, irgendwo scheint was kraeftig viel Traffic zu erzeugen...

[qqolli]

@ilovegym

Hi,

cloud-Adapter stoppen für eine gewisse Zeit brachte leider auch nichts, gleiches Ergebnis.

Soweit ich in den Logs sehen kann, scheint es keinen Adapter zu geben der viel Traffic generiert. Oder wie könnte ich das am besten rausfinden?

[qqolli]

@thomas-braun
Hi,

habe es gerade nochmal gemacht:

pi@ioBroker:~ $ iobroker update -i
Used repository: Stable (default)
hash unchanged, use cached sources
update done

Immerhin sagt er jetzt nicht mehr "failed to download new sources, ...", aber benutzt immer noch cached sources.

Ist das "ok" und wenn nicht, woran könnte es liegen?

[Homoran]

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

Ist das "ok"

wenn es nichts neues gibt, ja!

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

woran könnte es liegen?

• am Pfad
• am Netzwerk
• an der Installation
• am Raspi

aber:

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

Immerhin sagt er jetzt nicht mehr "failed to download new sources

Die Liste sollte er aber trotzdem bringen

[qqolli]

@homoran

Ganz verwegen würde ich sagen, da es vorher lief, das ich (ja, ich weiss das sagen sie alle) nichts an den von dir genannten Dingen (Pfad, Netzwerk, ...) geändert habe. Was ich gemacht hatte, war ein Update auf den neuen Admin.

Hatte ich schon ein paar Mal gefragt, aber keine Antwort bekommen. Ist das so ok?:

Anbei die vollständige Liste:

pi@ioBroker:~ $ iobroker update -i
Used repository: Stable (default)
hash unchanged, use cached sources
update done
Adapter    "admin"         : 5.1.23   , installed 5.1.23
Adapter    "alexa2"        : 3.9.3    , installed 3.9.3
Adapter    "backitup"      : 2.1.13   , installed 2.1.13
Adapter    "bring"         : 1.7.8    , installed 1.7.8
Adapter    "bydhvs"        : 1.2.3    , installed 1.2.3
Adapter    "cloud"         : 4.1.0    , installed 4.1.0
Adapter    "coronavirus-statistics": 0.6.3   , installed 0.7.0-4
Adapter    "countdown"     : 1.2.3    , installed 1.2.5
Adapter    "daswetter"     : 3.0.7    , installed 3.0.7
Adapter    "deconz"        : 1.3.19   , installed 1.3.19
Adapter    "devices"       : 1.0.9    , installed 1.0.9
Adapter    "discovery"     : 2.7.0    , installed 2.7.0
Adapter    "dwd"           : 2.7.7    , installed 2.7.7
Adapter    "fb-checkpresence": 1.1.7   , installed 1.1.7
Adapter    "feiertage"     : 1.0.17   , installed 1.0.23
Adapter    "flot"          : 1.10.6   , installed 1.10.6
Adapter    "fritzdect"     : 2.1.15   , installed 2.1.15
Adapter    "fronius"       : 1.0.5    , installed 1.1.3
Adapter    "fullybrowser"  : 2.0.8    , installed 2.0.9
Adapter    "history"       : 1.9.13   , installed 1.9.13
Adapter    "hm-rega"       : 3.0.29   , installed 3.0.29
Adapter    "hm-rpc"        : 1.14.43  , installed 1.14.43
Adapter    "ical"          : 1.11.2   , installed 1.11.2
Adapter    "icons-mfd-png" : 1.0.2    , installed 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2    , installed 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2   , installed 0.1.2
Adapter    "influxdb"      : 1.9.5    , installed 1.9.5
Adapter    "info"          : 1.9.8    , installed 1.9.8
Adapter    "iot"           : 1.8.22   , installed 1.8.22
Adapter    "javascript"    : 5.2.8    , installed 5.2.8
Controller "js-controller" : 3.3.15   , installed 3.3.15
Adapter    "mercedesme"    : 0.0.54   , installed 0.0.54
Adapter    "mobile"        : 1.0.1    , installed 1.0.1
Adapter    "modbus"        : 3.4.11   , installed 3.4.11
Adapter    "mqtt"          : 2.4.0    , installed 2.4.0
Adapter    "nut"           : 1.5.0    , installed 1.5.0
Adapter    "ph803w"        : 1.0.1    , installed 1.0.1
Adapter    "ping"          : 1.5.0    , installed 1.5.0
Adapter    "pollenflug"    : 1.0.6    , installed 1.0.6
Adapter    "pushover"      : 2.0.5    , installed 2.0.5
Adapter    "rpi2"          : 1.3.1    , installed 1.3.1
Adapter    "sainlogic"     : 0.7.2    , installed 0.6.0 [Updateable]
Adapter    "sayit"         : 1.12.3   , installed 1.12.3
Adapter    "shelly"        : 4.0.7    , installed 4.0.7
Adapter    "simple-api"    : 2.6.1    , installed 2.6.1
Adapter    "socketio"      : 3.1.4    , installed 3.1.4
Adapter    "sonoff"        : 2.4.5    , installed 2.4.5
Adapter    "sonos"         : 2.1.1    , installed 2.1.1
Adapter    "synology"      : 1.0.0    , installed 1.0.0
Adapter    "tankerkoenig"  : 2.1.1    , installed 2.1.1
Adapter    "telegram"      : 1.10.0   , installed 1.10.0
Adapter    "text2command"  : 2.1.1    , installed 2.1.1
Adapter    "tr-064"        : 4.2.14   , installed 4.2.14
Adapter    "trashschedule" : 1.2.0    , installed 1.2.0
Adapter    "unifi"         : 0.5.10   , installed 0.5.10
Adapter    "upnp"          : 1.0.19   , installed 1.0.19
Adapter    "vis"           : 1.4.3    , installed 1.4.3
Adapter    "vis-bars"      : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5   , installed 0.1.5
Adapter    "vis-colorpicker": 1.2.0   , installed 1.2.0
Adapter    "vis-google-fonts": 0.1.0   , installed 0.1.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.77.0   , installed 0.77.0
Adapter    "vis-inventwo"  : 3.0.11   , installed 3.0.11
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard"  : 0.0.2    , installed 0.0.2
Adapter    "vis-map"       : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.0   , installed 1.7.0
Adapter    "vis-plumb"     : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.3    , installed 2.5.3
Adapter    "weatherunderground": 3.3.1   , installed 3.3.1
Adapter    "web"           : 3.4.7    , installed 3.4.7
Adapter    "windows-control": 0.1.5   , installed 0.1.5
Adapter    "yahka"         : 0.12.0   , installed 0.13.1
Adapter    "yeelight-2"    : 1.0.3    , installed 1.0.3

[Homoran]

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

Anbei die vollständige Liste:

Super - dann gibt es im Moment nichts neues.

Das Problem mit dem gesperrten cloud-Zugriff muss aber andere Gründe haben

[qqolli]

@homoran

Ja, diese Gründe würde ich auch gene wissen :-(

So ganz allgemein, woran könnte es liegen das niemand einen Tip geben kann was hier einzustellen ist oder ob es so passt:

[Homoran]

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

woran könnte es liegen das niemand einen Tip geben kann was hier einzustellen ist oder ob es so passt:

weil das nichts mit dem Problem zu tun hat.
Was soll da nicht passen?

[qqolli]

@homoran

Wieso hat das nichts mit dem Problem zu tun?

Da ich mich nicht so genau auskenne habe ich ja gefragt, also wieso soll ich dann wissen ob es passt oder nicht?

[Homoran]

@qqolli sagte in ioBroker: Fernzugriff weg - SOS:

Wieso hat das nichts mit dem Problem zu tun?

das ist doch die Einstellung vom admin, oder?
so abgeschnittene Screenshots helfen nicht wirklich!

[qqolli]

@homoran

Wie ich weiter oben bereits geschrieben hatte, ist das die Einstellung des Web-Adapters (Reiter: Haupteinstellungen), nicht die des Admin!

Es hilft auch nicht wirklich etwas zu behaupten ohne es wirklich zu wissen, oder?