Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[crunchip]

@myzerat und da bekommst du jetzt auch oben erwähnte Fehler der Sensoren?
nach dem zurückspielen des snapshots die 1.5.5 Version probiert zu installieren?

[MyzerAT]

@crunchip

ja, habe alle konstillationen probiert. ivch werde jetzt wieder ganz zurück gehen vorm einspielen des backups

[crunchip]

@myzerat und das wäre dann welcher Stand?

[MyzerAT]

@crunchip

also debian 10 fertig installiert in der VM

[crunchip]

@myzerat also eine frische neue Installation?
und jetzt iobroker drauf und via backitup zurückspielen?

[MyzerAT]

@crunchip

ja genau!

[crunchip]

@myzerat ok, mach das mal, dann sehen wir weiter

[MyzerAT]

@crunchip
@arteck (bitte um hilfe)

so, habe gestern alles neu installiert und das backup eingespielt und diesmal habe ich den CC2531 in Verwendung. ich habe keine Aktoren installiert, die shepherd.db ist bis auf den CC2531 leer

und dennoch kommen immer wieder Fehlermeldungen:

host.RDJLHome	2021-05-27 12:01:03.348	error	instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
zigbee.0	2021-05-27 12:01:02.724	warn	(25029) Terminated (UNCAUGHT_EXCEPTION): Without reason
zigbee.0	2021-05-27 12:01:02.723	info	(25029) terminating
zigbee.0	2021-05-27 12:01:02.449	info	(25029) Zigbee: disabling joining new devices.
zigbee.0	2021-05-27 12:01:02.446	info	(25029) cleaned everything up...
zigbee.0	2021-05-27 12:01:02.433	error	(25029) Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.432	error	at processTicksAndRejections (internal/process/task_queues.js:97:5)
zigbee.0	2021-05-27 12:01:02.432	error	at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:421:36)
zigbee.0	2021-05-27 12:01:02.432	error	(25029) TypeError: Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.432	error	(25029) unhandled promise rejection: Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.431	error	(25029) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
zigbee.0	2021-05-27 12:01:02.422	error	(25029) Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.421	error	at processTicksAndRejections (internal/process/task_queues.js:97:5)
zigbee.0	2021-05-27 12:01:02.421	error	at Zigbee.publishFromState (/opt/iobroker/node_modules/iobroker.zigbee/main.js:421:36)
zigbee.0	2021-05-27 12:01:02.421	error	(25029) TypeError: Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.420	error	(25029) unhandled promise rejection: Cannot read property 'mapped' of undefined
zigbee.0	2021-05-27 12:01:02.418	error	(25029) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

langsam bin ich echt am verzweifeln. ich habe mir gedacht, auf nuc umzusteigen wäre eine gute idee, langsam bezweifle ich dies. alles funktioniert nur zigbee will nicht so recht. obwohl ich mehrmals immer wieder alles neu installiere, also von grund auf.

zur Zeit ist das System DEbian 10.10 auf Proxmox VM , node 12.22.1, nodejs 12.22.1, npm 6.14.12

pi@RDJLHome:/opt/iobroker$ npm list zigbee-herdsman-converters
iobroker.inst@3.0.0 /opt/iobroker
└─┬ iobroker.zigbee@1.4.4
└── zigbee-herdsman-converters@14.0.162

[Asgothian]

@myzerat sagte in Zigbee: DeviceConfigure failed?!:

pi@RDJLHome:/opt/iobroker$ npm list zigbee-herdsman-converters
iobroker.inst@3.0.0 /opt/iobroker
└─┬ iobroker.zigbee@1.4.4
└── zigbee-herdsman-converters@14.0.162

An dieser Stelle hast Du (haben wir) ein Problem.

Durch Anpassungen am Herdsman / Herdsman_converters sind Anpassungen im iobroker.zigbee notwendig geworden, die dazu führen das eine Installation des 1.4.4 unter Umständen nicht läuft. Du wirst hier also mindestens auf die Version im latest (beta), wenn nicht sogar auf die 1.5.5 von Github wechseln müssen.

Das Problem ist das wir bei der 1.4.4 es versäumt haben die Herdsman Version fest zu verknüpfen und so immer die neuste Herdsman Version installiert wird.

A.

[crunchip]

@myzerat du hast ein backup eingespielt, hast aber nun einen anderen Stick dran?
Logisch dass das nicht funktioniert.

[MyzerAT]

@crunchip

nein so ist es nicht, das backup war von einem raspi4 und da lief der cc2531 vorher auch seit Monaten.

[MyzerAT]

@asgothian

danke, hast du dazu einen link den ich in die katze (Adapter aus beliebiger Quelle installieren oder aktualisieren) eingeben muss ?

ich habe jetzt diese (deine) version installiert 1.5.1 von https://github.com/asgothian/ioBroker.zigbee

und das zeigt mein stick im adapter an

[Asgothian]

@myzerat sagte in Zigbee: DeviceConfigure failed?!:

ich habe jetzt diese (deine) version installiert 1.5.1 von https://github.com/asgothian/ioBroker.zigbee

Das ist nicht gut. Meine Version ist aktuell instabil und wird im Zweifelsfall nicht laufen.

Am einfachsten gehst du über die Katze und wählst nur den Zigbee Adapter aus, ohne das du über Benutzerdefiniert einen Link eingibst.

A.

[MyzerAT]

@asgothian

ok, mach ich gerade, da wird die 1.5.0 installiert

da kam jetzt eine fehlermeldung

Fertig mit Fehler: Cannot find io-package.json in /opt/iobroker/node_modules/iobroker.zigbee

$ ./iobroker upgrade zigbee@1.5.0
Update zigbee from @1.5.1 to @1.5.0
host.RDJLHome Adapter "system.adapter.zigbee.0" is stopped.
NPM version: 6.14.12npm install iobroker.zigbee@1.5.0 --loglevel error --prefix "/opt/iobroker" (System call)
../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);                                                                                       ^In file included from ../authenticate_pam.cc:23:../../nan/nan.h:1026:46: note: declared here   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(                                              ^~~~~~~~~~~~../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);                                                                                       ^In file included from ../authenticate_pam.cc:23:../../nan/nan.h:1026:46: note: declared here   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(                                              ^~~~~~~~~~~~../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’:../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]   Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked());                                                                                   ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));                                                   ^~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’   declarator __attribute__((deprecated(message)))   ^~~~~~~~~~../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’    serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1);                                                                     ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,       ^~~~~~~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]   res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked());                                                                     ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8-internal.h:14,                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:27,                 from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:3553:51: note: declared here   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));                                                   ^~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’   declarator __attribute__((deprecated(message)))   ^~~~~~~~~~
../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’    remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1);                                                                  ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,       ^~~~~~~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’  username->WriteUtf8(m->username, sizeof(m->username) - 1);                                                          ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,       ^~~~~~~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’  password->WriteUtf8(m->password, sizeof(m->password) - 1);                                                          ^In file included from /home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:67,                 from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,       ^~~~~~~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’../authenticate_pam.cc: At global scope:../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void void init(Handle<Object> exports) {           ^~~~~~../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope
../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) {           ^~~~~~           rand_r../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token void init(Handle<Object> exports) {                        ^../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope void init(Handle<Object> exports) {                          ^~~~~~~
In file included from ../../nan/nan.h:56,                 from ../authenticate_pam.cc:23:../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init);                               ^~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’       (node::addon_register_func) (regfunc),                          \                                    ^~~~~~~../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~
../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ NODE_MODULE(authenticate_pam, init);                               ^~~~/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’       (node::addon_register_func) (regfunc),                          \                                    ^~~~~~~../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~
make: *** [authenticate_pam.target.mk:111: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stack     at ChildProcess.emit (events.js:314:20)gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12)gyp ERR! System Linux 4.19.0-16-amd64gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pamgyp ERR! node -v v12.22.1gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok 
ERROR: Cannot find io-package.json in /opt/iobroker/node_modules/iobroker.zigbee
ERROR: Cannot parse /opt/iobroker/node_modules/iobroker.zigbee/io-package.json:SyntaxError: /opt/iobroker/node_modules/iobroker.zigbee/io-package.json: Unexpected token } in JSON at position 167Cannot find io-package.json in /opt/iobroker/node_modules/iobroker.zigbee
Adapter "zigbee" updatedhost.RDJLHome Adapter "system.adapter.zigbee.0" is started
 Cannot write file zigbee.svg: Connection is closed.
 Cannot write file zigbee.png: Connection is closed.
 Cannot write file words.js: Connection is closed.
 Cannot write file vis-network.min.js: Connection is closed.
 Cannot write file vis-network.min.css: Connection is closed.
 Cannot write file tab_m.html: Connection is closed.
 Cannot write file shuffle.min.js: Connection is closed.
 Cannot write file moment.min.js: Connection is closed.
 Cannot write file index_m.html: Connection is closed.
 Cannot write file index.html: Connection is closed.
 Cannot write file img/zemismart_sw2.png: Connection is closed.
 Cannot write file img/zbt_smart_switch.png: Connection is closed.
 Cannot write file img/zbt_remote.png: Connection is closed.
 Cannot write file img/zbt_led_panel.png: Connection is closed.
 Cannot write file img/zbt_e27_rgbw.png: Connection is closed.
 Cannot write file img/zbt_e27.png: Connection is closed.
 Cannot write file img/xiaomi_wireless_switch.png: Connection is closed.
 Cannot write file img/xiaomi_plug_eu.png: Connection is closed.
 Cannot write file img/wemo.png: Connection is closed.
ERROR: process exited with code 29

[Asgothian]

@myzerat
Hmm.. das ist seltsam.

Dann nutz mal bitte diesen Link direkt:

https://github.com/ioBroker/ioBroker.zigbee

A.

[MyzerAT]

@asgothian sagte in Zigbee: DeviceConfigure failed?!:

https://github.com/ioBroker/ioBroker.zigbee

ist installiert , zeigt version 1.5.6

folgende FM kommt: und ich musste die PAN ID ändern, somit ist der adapter mal auf grün. jetzt werde ich mal einige Aktoren einbinden und melde mich dann später ob es was gebracht hat, thx dir einstweilen

zigbee.0	2021-05-27 13:28:16.904	error	(27409) Error herdsman start
zigbee.0	2021-05-27 13:28:16.903	error	(27409) Failed to start Zigbee
zigbee.0	2021-05-27 13:28:16.903	error	(27409) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
zigbee.0	2021-05-27 13:28:16.724	info	(27409) Installed Version: ioBroker/ioBroker.zigbee#50d5b069ff6756f41fcda6af42a9faf01969462d
zigbee.0	2021-05-27 13:28:16.699	info	(27409) Starting Zigbee npm ...
zigbee.0	2021-05-27 13:28:16.698	info	(27409) Try to reconnect. 1 attempts left
zigbee.0	2021-05-27 13:28:06.697	error	(27409) Error herdsman start
zigbee.0	2021-05-27 13:28:06.696	error	(27409) Failed to start Zigbee
zigbee.0	2021-05-27 13:28:06.696	error	(27409) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
zigbee.0	2021-05-27 13:28:06.694	error	(27409) Re-commissioning your network will require re-pairing of all devices!
zigbee.0	2021-05-27 13:28:06.694	error	(27409) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
zigbee.0	2021-05-27 13:28:06.693	error	(27409) Please update configuration to prevent further issues.
zigbee.0	2021-05-27 13:28:06.693	error	(27409) - Channel List: configured=12, adapter=11
zigbee.0	2021-05-27 13:28:06.692	error	(27409) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
zigbee.0	2021-05-27 13:28:06.691	error	(27409) - Extended PAN ID: configured=00124b001940be75, adapter=00124b001940be75
zigbee.0	2021-05-27 13:28:06.690	error	(27409) - PAN ID: configured=6752, adapter=6755
zigbee.0	2021-05-27 13:28:06.690	error	(27409) Configuration is not consistent with adapter state/backup!
zigbee.0	2021-05-27 13:28:05.131	info	(27409) Installed Version: ioBroker/ioBroker.zigbee#50d5b069ff6756f41fcda6af42a9faf01969462d
zigbee.0	2021-05-27 13:28:04.729	info	(27409) Starting Zigbee npm ...
zigbee.0	2021-05-27 13:28:04.628	info	(27409) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16

[MyzerAT]

@Asgothian

wie es aussieht kommen keine Fehler mehr!

DANKE !!!!!!!!!!!!!!!!!!!!!!