Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Kusi]

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

SDK Quellcode habe ich gesehen, dass newValue tatsächlich ein boolean ist; damit wäre es true oder false

Wie muss es genau heissen?

Wie folgt kann ich den Treiber nicht laden:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"
    }
  },

[UncleSam]

@Kusi Die schliessenden Klammern fehlen beim http(...)

[Kusi]

@UncleSam das habe ich mir eben auch gedacht und beim zweiten Versuch getestet, aber dann kommt folgender Fehler:

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
/home/pi/node_modules/neeo_driver-test/index.js:29
actualDriverObject.addButtonHandler((buttonName, deviceId) => {
                  ^

SyntaxError: Unexpected token '.'
    at wrapSafe (internal/modules/cjs/loader.js:1053:16)
    at Module._compile (internal/modules/cjs/loader.js:1101:27)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
    at Module.load (internal/modules/cjs/loader.js:985:32)
    at Function.Module._load (internal/modules/cjs/loader.js:878:14)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
    at internal/main/run_main_module.js:17:47

So sieht es jetzt komplett aus:

"use strict";
const neeoapi = require("neeo-sdk");
const http = require("http.min");

let actualDriverObject;
actualDriverObject = neeoapi.buildDevice("ioBroker"); // change "My first driver" to anything you like but keep the "" characters
actualDriverObject.setType("ACCESSOIRE"); // can be changed to "ACCESSOIRE" or "AVRECEIVER" or "DVB" or "DVD" or "GAMECONSOLE" or "LIGHT" or "MEDIAPLAYER" or "MUSICPLAYER" or "PROJECTOR" or "TV" or "VOD"
actualDriverObject.addButton({ name: "button-a", label: "Button A" }); // This makes a new button named button-a, on the remote its shown as Button A
actualDriverObject.addButton({ name: "button-b", label: "Button B" }); // This makes a new button named button-b, on the remote its shown as Button B
actualDriverObject.addButton({ name: "button-c", label: "Button C" }); // This makes a new button named button-c, on the remote its shown as Button C
actualDriverObject.addButton({ name: "button-d", label: "Button D" }); // This makes a new button named button-d, on the remote its shown as Button D
actualDriverObject.addButton({ name: "button-e", label: "Button E" }); // This makes a new button named button-d, on the remote its shown as Button E
actualDriverObject.addButton({ name: "button-f", label: "Button F" }); // This makes a new button named button-d, on the remote its shown as Button F
actualDriverObject.addButton({ name: "button-g", label: "Button G" }); // This makes a new button named button-d, on the remote its shown as Button G
actualDriverObject.addButton({ name: "button-h", label: "Button H" }); // This makes a new button named button-d, on the remote its shown as Button H

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr")
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch")
    }
  },


// Here is the code that gets executed when a button is pressed.
actualDriverObject.addButtonHandler((buttonName, deviceId) => {
  console.log(`[CONTROLLER] ${buttonName} button pressed`);
  if (buttonName == "button-a") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=A"); //Just sneds a http get, use this to controll devices that supports a http get
  }
  if (buttonName == "button-b") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=B");
  }
  if (buttonName == "button-c") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=C");
  }
  if (buttonName == "button-d") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=D");
  }
  if (buttonName == "button-e") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=E");
  }
  if (buttonName == "button-f") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=F");
  }
  if (buttonName == "button-g") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=G");
  }
  if (buttonName == "button-h") {
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Button?value=H");
  }
});

// change this to set your NEEO brain IP. change 10.2.1.64 to the IP address of your NEEO brain.
const neeoSettings = {
  brain: "192.168.1.80",
  port: 1104,
  name: "eigeneTasten",
  devices: [actualDriverObject]
};

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////
// Do not change the code below this point. ///////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////////////////////////
neeoapi
  .startServer(neeoSettings)
  .then(() => {
    console.log("# READY! use the NEEO app to search for: " + actualDriverObject.devicename);
    if (actualDriverObject.type == "ACCESSOIRE") {
      console.log("\r\n  ACCESOIRE devices do not have their own recipy slides.");
      console.log("  You need to add the buttons as shortcuts to an existing device slide,");
      console.log("  add a dummy device (search for dummy) and add the buttons as shortcut there or");
      console.log("  change the actualDriverObject.setType line to present this driver as a different device type.");
    }
  })
  .catch(err => {
    console.error("ERROR!", err);
    process.exit(1);
  });

[UncleSam]

@mickym sagte in Befehle von Neeo nach ioBroker senden:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=" + newValue);
  },
  getter: (deviceId) => switchState,})

Das hier geht, oder? Wenn du etwas änderst, musst du immer schauen, dass die öffnenden und schliessenden Klammern (rund, geschweift, eckig) übereinstimmen.

Ergo sollte es IMHO heissen:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"
    }
  },
  getter: (deviceId) => switchState,})

[Kusi]

@UncleSam Gemäss Fehler beim vorherigen Laden des Treibers liegt der Fehler vermutlich an einem anderen Ort?

Zeilen 28 und 29 von index.js

// Here is the code that gets executed when a button is pressed.
actualDriverObject.addButtonHandler((buttonName, deviceId) => {

[UncleSam]

@Kusi Wenn Zeichen fehlen auf den vorherigen Zeilen, kann es sehr gut sein, dass der Fehler erst auf der nächsten Code-Zeile "zum Vorschein" kommt.

[Kusi]

@UncleSam Aus meiner Sicht fehlt irgendwo eine schliessende Klammer, denn die Öffnende ist bei

actualDriverObject.addSwitch(

Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?

[UncleSam]

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

Ergo sollte es IMHO heissen:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch"
    }
  },
  getter: (deviceId) => switchState,})

Genau. Zeile 10.

[Kusi]

@UncleSam Das ist jetzt die Antwort beim Treiber-Start:

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
/home/pi/node_modules/neeo_driver-test/index.js:25
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr"
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

SyntaxError: missing ) after argument list
    at wrapSafe (internal/modules/cjs/loader.js:1053:16)
    at Module._compile (internal/modules/cjs/loader.js:1101:27)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:1157:10)
    at Module.load (internal/modules/cjs/loader.js:985:32)
    at Function.Module._load (internal/modules/cjs/loader.js:878:14)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
    at internal/main/run_main_module.js:17:47

Klammer fehlten!

[UncleSam]

@Kusi sagte in Befehle von Neeo nach ioBroker senden:

Woher weis die If-Schleife eigentlich, ob der Wert/Schalter true oder false isch?

if (newValue) überprüft den übergebenen neuen Wert, wenn der true (oder etwas ähnliches) ist, wird das erste ausgeführt, sonst das zweite.

[UncleSam]

Sorry, falsches korrigiert:

actualDriverObject.addSwitch({ name: 'Schalter', label: 'Schalter' },{
  setter: (deviceId, newValue) => {
    switchState = newValue;
    if (newValue) {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=wahr");
    } else {
      http("http://192.168.1.15:8087/set/javascript.0.Eigene_Datenpunkte.Neeo-Switch?value=falsch");
    }
  },
  getter: (deviceId) => switchState,})

[Kusi]

@UncleSam Wie beende ich denn jetzt den Treiber, ohne dass ich den Raspi neu starten muss??

pi@raspberrypi:~ $ node /home/pi/node_modules/neeo_driver-test
# READY! use the NEEO app to search for: ioBroker

  ACCESOIRE devices do not have their own recipy slides.
  You need to add the buttons as shortcuts to an existing device slide,
  add a dummy device (search for dummy) and add the buttons as shortcut there or
  change the actualDriverObject.setType line to present this driver as a different device type.

[UncleSam]

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

[Kusi]

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

Danke.

Laden des Treibers funktioniert, jedoch ändert der DP nicht.

[Kusi]

@UncleSam sagte in Befehle von Neeo nach ioBroker senden:

@Kusi Ctrl-C in dem Putty-Fenster in dem der driver läuft.

Gibt es auch eine Möglichkeit den Treiber zu stoppen, wenn dieser als Java aus ioBroker gestartet wird?