UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Oreider]

Hallo zusammen,

wüsste nicht was sich an meinem Setup geändert hat aber leider klappt bei mir der core/shutdown Befehl seit kurzem nicht mehr zuverlässig.
Octoprint 5.1.0
Js 5.0.17
Node js 18.19.0
npm 10.2.3

Folgende Meldung bekomme ich im Log:

Was könnte ich versuchen...
Und warum ist der Befehl nicht erlaubt?
Manchmal klappt es scheinbar. Hab aber noch nicht rausgefunden was ich dabei anders mache.

Danke und schönen Gruß
Tom

[Thomas Braun]

@oreider sagte in Test Adapter OctoPrint:

Was könnte ich versuchen...
Und warum ist der Befehl nicht erlaubt?

Vollständigeres Log in Textform posten?

[Oreider]

@thomas-braun
Leider gibts zum octoprint nicht mehr im Log.
Sobald ich den Befehl sende, bekomme ich die oben genannte Meldung. Sonst nichts.

[Thomas Braun]

@oreider

Und hinter

Choose of of:

soll nix mehr kommen?
Poste die Zeilen drumherum.

[haus-automatisierung]

@oreider Dann hast Du wohl einfach keine Befehle in OctoPrint hinterlegt? Über eine bessere Meldung könnte man sprechen, ja

Zeig mal die Config. Und wenn alles richtig ist, hilft mir nur ein Debug-Log zur Fehlersuche

[Oreider]

@haus-automatisierung

Heute hab ich noch eine zweite Meldung von Octoprint bekommen kurz bevor ich das System herunterfahren wollte:

2023-12-17 08:45:08.922 - info: daswetter.0 (398463) starting. Version 3.1.11 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.19.0, js-controller: 5.0.17
2023-12-17 08:45:27.958 - info: linux-control.0 (138367) getting data from RaspiMirror (192.168.188.88:22)
2023-12-17 08:45:31.039 - info: linux-control.0 (138367) [getConnection] Host 'RaspiMirror' (192.168.188.88:22) seems not to be online
2023-12-17 08:45:43.890 - info: daswetter.0 (398463) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-12-17 08:45:44.406 - info: daswetter.0 (398463) cleaned everything up...
2023-12-17 08:45:44.433 - info: host.iobroker instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-12-17 08:47:00.611 - info: octoprint.0 (138340) error ECONNABORTED from /api/version: timeout of 2000ms exceeded
2023-12-17 08:47:28.762 - info: admin.0 (136948) ==> Connected system.user.admin from ::ffff:192.168.188.59
2023-12-17 08:48:23.061 - info: admin.0 (136948) ==> Connected system.user.admin from ::ffff:192.168.188.59
2023-12-17 08:48:52.257 - info: admin.0 (136948) <== Disconnect system.user.admin from ::ffff:192.168.188.59 javascript
2023-12-17 08:48:58.327 - error: octoprint.0 (138340) system command not allowed: core/shutdown. Choose one of:
2023-12-17 08:50:00.031 - info: host.iobroker instance system.adapter.netatmo-crawler.0 started with pid 398649
2023-12-17 08:50:02.709 - info: netatmo-crawler.0 (398649) Plugin sentry Sentry Plugin disabled for this process because data reporting is disabled on instance
2023-12-17 08:50:03.050 - info: netatmo-crawler.0 (398649) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.19.0, js-controller: 5.0.17
2023-12-17 08:50:03.148 - info: netatmo-crawler.0 (398649) Getting data for stationid:70:ee:50:27:59:8a
2023-12-17 08:50:04.462 - info: netatmo-crawler.0 (398649) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-12-17 08:50:05.008 - info: host.iobroker instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Am Octoprint selbst hab ich keine Befehle eingegeben... Ging aber bis vor kurzem auch so. Das unten war standardmäßig drin:

[haus-automatisierung]

@oreider sagte in Test Adapter OctoPrint:

Ging aber bis vor kurzem auch so. Das unten war standardmäßig drin:

Welche OctoPrint-Version ist denn installiert? Hast Du ein Update gemacht? Mit welcher Version ging es denn noch? Bisschen mehr Input wäre hilfreich

[Oreider]

@haus-automatisierung

Leider ist das schwer zu sagen ab wann es noch funktioniert hat. Ich lasse mittels Sprachbefehl den Drucker (octopi) herunterfahren und danach eine Steckdose abschalten. Hab nur durch Zufall gesehen dass octoprint nach dem Befehl noch erreichbar war und dann ins log gesehen.

Hab die Version 1.9.3 und kann nicht sagen obs an der neuen Version liegt.

[Oreider]

Die Abfrage von Werten klappt und auch ändern von Temperaturen funktioniert.
Nur der Befehl zum herunterfahren will nicht mehr.

[haus-automatisierung]

@oreider Ohne Debug-Log kann ich auch nur raten, …

[Oreider]

@haus-automatisierung
Hallo nochmal. Sorry kannte das Debug Log nicht.
Habs jetzt aktiviert und komischerweise klappte jetzt der Shutdown in drei von drei Versuchen...
Hier das Log mit den erfolgreich ausgeführten Befehlen. Evtl. kannst du daraus etwas schließen...

2023-12-17 10:01:03.341 - info: daswetter.0 (402035) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2023-12-17 10:01:03.856 - info: daswetter.0 (402035) cleaned everything up...
2023-12-17 10:01:03.877 - info: host.iobroker instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-12-17 10:01:09.879 - debug: octoprint.0 (401712) refreshState: started from "timeout (operational)"
2023-12-17 10:01:09.879 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:09.879 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:01:09.885 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (operational): id 123454 - seconds: 30
2023-12-17 10:01:09.936 - debug: octoprint.0 (401712) received 200 response from /api/version with content: {"api":"0.1","server":"1.9.3","text":"OctoPrint 1.9.3"}
2023-12-17 10:01:09.936 - debug: octoprint.0 (401712) connected to OctoPrint API - online! - status: 200
2023-12-17 10:01:09.937 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:09.937 - debug: octoprint.0 (401712) sending "get" request to "/api/connection" without data
2023-12-17 10:01:09.939 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:09.940 - debug: octoprint.0 (401712) sending "get" request to "/api/printer" without data
2023-12-17 10:01:10.004 - debug: octoprint.0 (401712) received 200 response from /api/printer with content: {"sd":{"ready":false},"state":{"error":"","flags":{"cancelling":false,"closedOrError":false,"error":false,"finishing":false,"operational":true,"paused":false,"pausing":false,"printing":false,"ready":true,"resuming":false,"sdReady":false},"text":"Operational"},"temperature":{"bed":{"actual":23.46,"offset":0,"target":0},"tool0":{"actual":23.77,"offset":0,"target":0}}}
2023-12-17 10:01:10.033 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:10.033 - debug: octoprint.0 (401712) sending "get" request to "/api/job" without data
2023-12-17 10:01:10.176 - debug: octoprint.0 (401712) received 200 response from /api/connection with content: {"current":{"baudrate":115200,"port":"/dev/ttyACM0","printerProfile":"_default","state":"Operational"},"options":{"baudratePreference":null,"baudrates":[250000,230400,115200,57600,38400,19200,9600],"portPreference":null,"ports":["/dev/ttyACM0"],"printerProfilePreference":"_default","printerProfiles":[{"id":"_default","name":"Sindewinder X2"}]}}
2023-12-17 10:01:10.177 - debug: octoprint.0 (401712) updatePrinterStatus from: "Operational" -> printerOperational: true, printerPrinting: false
2023-12-17 10:01:10.177 - debug: octoprint.0 (401712) [refreshFiles] started
2023-12-17 10:01:10.225 - debug: octoprint.0 (401712) received 200 response from /api/job with content: {"job":{"estimatedPrintTime":null,"filament":{"length":null,"volume":null},"file":{"date":null,"name":null,"origin":null,"path":null,"size":null},"lastPrintTime":null,"user":null},"progress":{"completion":null,"filepos":null,"printTime":null,"printTimeLeft":null,"printTimeOrigin":null},"state":"Operational"}
2023-12-17 10:01:10.288 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:10.289 - debug: octoprint.0 (401712) sending "get" request to "/api/files?recursive=true" without data
2023-12-17 10:01:10.341 - debug: octoprint.0 (401712) received 200 response from /api/files?recursive=true with content: {"files":[],"free":3592359936,"total":7516811264}
2023-12-17 10:01:10.341 - debug: octoprint.0 (401712) [refreshFiles] found 0 files
2023-12-17 10:01:10.611 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_USB_SD_MicroSD_Card_Holder_v2_2"
2023-12-17 10:01:10.908 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Werra_King_steck"
2023-12-17 10:01:11.086 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_TOP"
2023-12-17 10:01:11.266 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_VASE"
2023-12-17 10:01:11.461 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_X1_frontcammount"
2023-12-17 10:01:11.655 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_20mm_cube_soft_edges"
2023-12-17 10:01:11.875 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_6b34cc48d6759a20ffa9e5c8a10cead3"
2023-12-17 10:01:12.103 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_V3_0_Wera_AS_55_Slotted"
2023-12-17 10:01:12.298 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Switch_holder"
2023-12-17 10:01:12.477 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Wand"
2023-12-17 10:01:12.681 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_TS100_Bace"
2023-12-17 10:01:12.886 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_TS100_Mount"
2023-12-17 10:01:13.061 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_thin_bit"
2023-12-17 10:01:13.229 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_WallBase"
2023-12-17 10:01:13.432 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Ulanzi_wall_mount"
2023-12-17 10:01:13.691 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Top_H20_Pi_Hole_SM"
2023-12-17 10:01:13.914 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_Top_Pi_Hole_SM"
2023-12-17 10:01:14.107 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_xbox_controller_stand_for_2"
2023-12-17 10:01:14.252 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_wiimote_holder_4"
2023-12-17 10:01:14.402 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_VESA_Wallmount"
2023-12-17 10:01:14.554 - debug: octoprint.0 (401712) [refreshFiles] file deleted: "files.local_ASX1_3DBenchy"
2023-12-17 10:01:14.604 - info: linux-control.0 (138367) getting data from RaspiMirror (192.168.188.88:22)
2023-12-17 10:01:17.663 - info: linux-control.0 (138367) [getConnection] Host 'RaspiMirror' (192.168.188.88:22) seems not to be online
2023-12-17 10:01:30.876 - debug: octoprint.0 (401712) sending system command: core/shutdown
2023-12-17 10:01:30.877 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:30.877 - debug: octoprint.0 (401712) sending "post" request to "/api/system/commands/core/shutdown" with data: {}
2023-12-17 10:01:30.987 - debug: octoprint.0 (401712) received 204 response from /api/system/commands/core/shutdown with content: ""
2023-12-17 10:01:39.885 - debug: octoprint.0 (401712) refreshState: started from "timeout (operational)"
2023-12-17 10:01:39.885 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:01:39.886 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:01:39.890 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (operational): id 126961 - seconds: 30
2023-12-17 10:01:41.893 - info: octoprint.0 (401712) error ECONNABORTED from /api/version: timeout of 2000ms exceeded
2023-12-17 10:01:41.895 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:01:41.896 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:09.890 - debug: octoprint.0 (401712) refreshState: started from "timeout (operational)"
2023-12-17 10:02:09.890 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:09.891 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:09.893 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127159 - seconds: 10
2023-12-17 10:02:11.896 - debug: octoprint.0 (401712) timeout of 2000ms exceeded
2023-12-17 10:02:11.898 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:02:11.898 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:19.895 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:02:19.895 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:19.896 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:19.898 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127234 - seconds: 10
2023-12-17 10:02:21.901 - debug: octoprint.0 (401712) timeout of 2000ms exceeded
2023-12-17 10:02:21.903 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:02:21.904 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:29.898 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:02:29.899 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:29.899 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:29.902 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127350 - seconds: 10
2023-12-17 10:02:31.904 - debug: octoprint.0 (401712) timeout of 2000ms exceeded
2023-12-17 10:02:31.906 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:02:31.906 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:39.903 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:02:39.903 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:39.904 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:39.906 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127464 - seconds: 10
2023-12-17 10:02:41.909 - debug: octoprint.0 (401712) timeout of 2000ms exceeded
2023-12-17 10:02:41.911 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:02:41.911 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:49.908 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:02:49.908 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:49.908 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:49.911 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127539 - seconds: 10
2023-12-17 10:02:49.916 - info: octoprint.0 (401712) error ECONNREFUSED from /api/version: connect ECONNREFUSED 192.168.188.47:80
2023-12-17 10:02:49.918 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"connect ECONNREFUSED 192.168.188.47:80","name":"Error","stack":"Error: connect ECONNREFUSED 192.168.188.47:80\n at Function.AxiosError.from (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/core/AxiosError.js:89:14)\n at RedirectableRequest.handleRequestError (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:606:25)\n at RedirectableRequest.emit (node:events:529:35)\n at RedirectableRequest.emit (node:domain:489:12)\n at ClientRequest.eventHandlers. (/opt/iobroker/node_modules/follow-redirects/index.js:14:24)\n at ClientRequest.emit (node:events:529:35)\n at ClientRequest.emit (node:domain:489:12)\n at Socket.socketErrorListener (node:_http_client:501:9)\n at Socket.emit (node:events:517:28)\n at Socket.emit (node:domain:489:12)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNREFUSED","status":null}
2023-12-17 10:02:49.919 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:02:59.911 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:02:59.912 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:02:59.912 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:02:59.915 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127651 - seconds: 10
2023-12-17 10:03:01.918 - info: octoprint.0 (401712) error ECONNABORTED from /api/version: timeout of 2000ms exceeded
2023-12-17 10:03:01.919 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:03:01.920 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:03:09.916 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:03:09.916 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:09.916 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:03:09.919 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127765 - seconds: 10
2023-12-17 10:03:09.947 - warn: octoprint.0 (401712) received 502 response from /api/version with content: "
502 Bad Gateway
\nThe server returned an invalid or incomplete response.\n\n"
2023-12-17 10:03:09.948 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"Request failed with status code 502","name":"AxiosError","stack":"AxiosError: Request failed with status code 502\n at settle (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/core/settle.js:19:12)\n at IncomingMessage.handleStreamEnd (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:585:11)\n at IncomingMessage.emit (node:events:529:35)\n at IncomingMessage.emit (node:domain:489:12)\n at endReadableNT (node:internal/streams/readable:1400:12)\n at processTicksAndRejections (node:internal/process/task_queues:82:21)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ERR_BAD_RESPONSE","status":502}
2023-12-17 10:03:09.949 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:03:19.920 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:03:19.920 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:19.921 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:03:19.925 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (API not connected): id 127852 - seconds: 10
2023-12-17 10:03:20.087 - debug: octoprint.0 (401712) received 200 response from /api/version with content: {"api":"0.1","server":"1.9.3","text":"OctoPrint 1.9.3"}
2023-12-17 10:03:20.088 - debug: octoprint.0 (401712) connected to OctoPrint API - online! - status: 200
2023-12-17 10:03:20.089 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:20.090 - debug: octoprint.0 (401712) sending "get" request to "/api/connection" without data
2023-12-17 10:03:20.094 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:20.094 - debug: octoprint.0 (401712) sending "get" request to "/api/printer" without data
2023-12-17 10:03:20.269 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:20.270 - debug: octoprint.0 (401712) sending "get" request to "/api/job" without data
2023-12-17 10:03:20.762 - debug: octoprint.0 (401712) received 200 response from /api/connection with content: {"current":{"baudrate":115200,"port":"/dev/ttyACM0","printerProfile":"_default","state":"Operational"},"options":{"baudratePreference":null,"baudrates":[250000,230400,115200,57600,38400,19200,9600],"portPreference":null,"ports":["/dev/ttyACM0"],"printerProfilePreference":"_default","printerProfiles":[{"id":"_default","name":"Sindewinder X2"}]}}
2023-12-17 10:03:20.762 - debug: octoprint.0 (401712) updatePrinterStatus from: "Operational" -> printerOperational: true, printerPrinting: false
2023-12-17 10:03:20.763 - debug: octoprint.0 (401712) [refreshFiles] started
2023-12-17 10:03:20.852 - debug: octoprint.0 (401712) received 200 response from /api/printer with content: {"sd":{"ready":false},"state":{"error":"","flags":{"cancelling":false,"closedOrError":false,"error":false,"finishing":false,"operational":true,"paused":false,"pausing":false,"printing":false,"ready":true,"resuming":false,"sdReady":false},"text":"Operational"},"temperature":{"bed":{"actual":23.3,"offset":0,"target":0},"tool0":{"actual":23.63,"offset":0,"target":0}}}
2023-12-17 10:03:20.872 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:20.873 - debug: octoprint.0 (401712) sending "get" request to "/api/files?recursive=true" without data
2023-12-17 10:03:20.934 - debug: octoprint.0 (401712) received 200 response from /api/job with content: {"job":{"estimatedPrintTime":null,"filament":{"length":null,"volume":null},"file":{"date":null,"name":null,"origin":null,"path":null,"size":null},"lastPrintTime":null,"user":null},"progress":{"completion":null,"filepos":null,"printTime":null,"printTimeLeft":null,"printTimeOrigin":null},"state":"Operational"}
2023-12-17 10:03:21.106 - debug: octoprint.0 (401712) received 200 response from /api/files?recursive=true with content: {"files":[],"free":3587260416,"total":7516811264}
2023-12-17 10:03:21.106 - debug: octoprint.0 (401712) [refreshFiles] found 0 files
2023-12-17 10:03:29.927 - debug: octoprint.0 (401712) refreshState: started from "timeout (API not connected)"
2023-12-17 10:03:29.927 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:29.928 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:03:29.930 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (operational): id 128500 - seconds: 30
2023-12-17 10:03:29.977 - debug: octoprint.0 (401712) received 200 response from /api/version with content: {"api":"0.1","server":"1.9.3","text":"OctoPrint 1.9.3"}
2023-12-17 10:03:29.977 - debug: octoprint.0 (401712) connected to OctoPrint API - online! - status: 200
2023-12-17 10:03:29.978 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:29.978 - debug: octoprint.0 (401712) sending "get" request to "/api/connection" without data
2023-12-17 10:03:29.980 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:29.981 - debug: octoprint.0 (401712) sending "get" request to "/api/printer" without data
2023-12-17 10:03:30.067 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:30.067 - debug: octoprint.0 (401712) sending "get" request to "/api/job" without data
2023-12-17 10:03:30.180 - debug: octoprint.0 (401712) received 200 response from /api/connection with content: {"current":{"baudrate":115200,"port":"/dev/ttyACM0","printerProfile":"_default","state":"Operational"},"options":{"baudratePreference":null,"baudrates":[250000,230400,115200,57600,38400,19200,9600],"portPreference":null,"ports":["/dev/ttyACM0"],"printerProfilePreference":"_default","printerProfiles":[{"id":"_default","name":"Sindewinder X2"}]}}
2023-12-17 10:03:30.180 - debug: octoprint.0 (401712) updatePrinterStatus from: "Operational" -> printerOperational: true, printerPrinting: false
2023-12-17 10:03:30.181 - debug: octoprint.0 (401712) [refreshFiles] started
2023-12-17 10:03:30.220 - debug: octoprint.0 (401712) received 200 response from /api/printer with content: {"sd":{"ready":false},"state":{"error":"","flags":{"cancelling":false,"closedOrError":false,"error":false,"finishing":false,"operational":true,"paused":false,"pausing":false,"printing":false,"ready":true,"resuming":false,"sdReady":false},"text":"Operational"},"temperature":{"bed":{"actual":23.42,"offset":0,"target":0},"tool0":{"actual":23.61,"offset":0,"target":0}}}
2023-12-17 10:03:30.263 - debug: octoprint.0 (401712) received 200 response from /api/job with content: {"job":{"estimatedPrintTime":null,"filament":{"length":null,"volume":null},"file":{"date":null,"name":null,"origin":null,"path":null,"size":null},"lastPrintTime":null,"user":null},"progress":{"completion":null,"filepos":null,"printTime":null,"printTimeLeft":null,"printTimeOrigin":null},"state":"Operational"}
2023-12-17 10:03:30.294 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:30.295 - debug: octoprint.0 (401712) sending "get" request to "/api/files?recursive=true" without data
2023-12-17 10:03:30.354 - debug: octoprint.0 (401712) received 200 response from /api/files?recursive=true with content: {"files":[],"free":3587264512,"total":7516811264}
2023-12-17 10:03:30.355 - debug: octoprint.0 (401712) [refreshFiles] found 0 files
2023-12-17 10:03:59.931 - debug: octoprint.0 (401712) refreshState: started from "timeout (operational)"
2023-12-17 10:03:59.932 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:59.932 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:03:59.935 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (operational): id 129169 - seconds: 30
2023-12-17 10:03:59.991 - debug: octoprint.0 (401712) received 200 response from /api/version with content: {"api":"0.1","server":"1.9.3","text":"OctoPrint 1.9.3"}
2023-12-17 10:03:59.991 - debug: octoprint.0 (401712) connected to OctoPrint API - online! - status: 200
2023-12-17 10:03:59.992 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:59.992 - debug: octoprint.0 (401712) sending "get" request to "/api/connection" without data
2023-12-17 10:03:59.994 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:03:59.994 - debug: octoprint.0 (401712) sending "get" request to "/api/printer" without data
2023-12-17 10:04:00.093 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:04:00.093 - debug: octoprint.0 (401712) sending "get" request to "/api/job" without data
2023-12-17 10:04:00.230 - debug: octoprint.0 (401712) received 200 response from /api/connection with content: {"current":{"baudrate":115200,"port":"/dev/ttyACM0","printerProfile":"_default","state":"Operational"},"options":{"baudratePreference":null,"baudrates":[250000,230400,115200,57600,38400,19200,9600],"portPreference":null,"ports":["/dev/ttyACM0"],"printerProfilePreference":"_default","printerProfiles":[{"id":"_default","name":"Sindewinder X2"}]}}
2023-12-17 10:04:00.230 - debug: octoprint.0 (401712) updatePrinterStatus from: "Operational" -> printerOperational: true, printerPrinting: false
2023-12-17 10:04:00.231 - debug: octoprint.0 (401712) [refreshFiles] started
2023-12-17 10:04:00.280 - debug: octoprint.0 (401712) received 200 response from /api/printer with content: {"sd":{"ready":false},"state":{"error":"","flags":{"cancelling":false,"closedOrError":false,"error":false,"finishing":false,"operational":true,"paused":false,"pausing":false,"printing":false,"ready":true,"resuming":false,"sdReady":false},"text":"Operational"},"temperature":{"bed":{"actual":23.3,"offset":0,"target":0},"tool0":{"actual":23.69,"offset":0,"target":0}}}
2023-12-17 10:04:00.321 - debug: octoprint.0 (401712) received 200 response from /api/job with content: {"job":{"estimatedPrintTime":null,"filament":{"length":null,"volume":null},"file":{"date":null,"name":null,"origin":null,"path":null,"size":null},"lastPrintTime":null,"user":null},"progress":{"completion":null,"filepos":null,"printTime":null,"printTimeLeft":null,"printTimeOrigin":null},"state":"Operational"}
2023-12-17 10:04:00.347 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:04:00.347 - debug: octoprint.0 (401712) sending "get" request to "/api/files?recursive=true" without data
2023-12-17 10:04:00.409 - debug: octoprint.0 (401712) received 200 response from /api/files?recursive=true with content: {"files":[],"free":3583709184,"total":7516811264}
2023-12-17 10:04:00.410 - debug: octoprint.0 (401712) [refreshFiles] found 0 files
2023-12-17 10:04:10.865 - debug: octoprint.0 (401712) sending system command: core/shutdown
2023-12-17 10:04:10.866 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:04:10.867 - debug: octoprint.0 (401712) sending "post" request to "/api/system/commands/core/shutdown" with data: {}
2023-12-17 10:04:10.947 - debug: octoprint.0 (401712) received 204 response from /api/system/commands/core/shutdown with content: ""
2023-12-17 10:04:29.936 - debug: octoprint.0 (401712) refreshState: started from "timeout (operational)"
2023-12-17 10:04:29.937 - debug: octoprint.0 (401712) [buildServiceRequest] starting service request
2023-12-17 10:04:29.937 - debug: octoprint.0 (401712) sending "get" request to "/api/version" without data
2023-12-17 10:04:29.940 - debug: octoprint.0 (401712) refreshStateTimeout: re-created refresh timeout (operational): id 129910 - seconds: 30
2023-12-17 10:04:31.860 - info: admin.0 (136948) ==> Connected system.user.admin from ::ffff:192.168.188.59
2023-12-17 10:04:31.944 - info: octoprint.0 (401712) error ECONNABORTED from /api/version: timeout of 2000ms exceeded
2023-12-17 10:04:31.946 - debug: octoprint.0 (401712) (version) received error - API is now offline: {"message":"timeout of 2000ms exceeded","name":"AxiosError","stack":"AxiosError: timeout of 2000ms exceeded\n at RedirectableRequest.handleRequestTimeout (/opt/iobroker/node_modules/iobroker.octoprint/node_modules/axios/lib/adapters/http.js:643:16)\n at RedirectableRequest.emit (node:events:517:28)\n at RedirectableRequest.emit (node:domain:489:12)\n at Timeout. (/opt/iobroker/node_modules/follow-redirects/index.js:169:12)\n at listOnTimeout (node:internal/timers:569:17)\n at processTimers (node:internal/timers:512:7)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":2000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, */*","X-Api-Key":"2902964A0F7B42F69AD1017FB5B1AE38","User-Agent":"axios/1.6.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","data":null,"baseURL":"http://192.168.188.47:80","url":"/api/version","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ECONNABORTED","status":null}
2023-12-17 10:04:31.947 - debug: octoprint.0 (401712) API is offline
2023-12-17 10:04:36.259 - info: admin.0 (136948) <== Disconnect system.user.admin from ::ffff:192.168.188.59 javascript

[da_Woody]

@haus-automatisierung anderes, altes Problem
. Thumbnail URL manchmal kommt sie bei Druckbeginn, manchmal erst nach Druckbeendigung.
Liegt nicht an Sonderzeichen im Namen. Vorgestern Tab.gcode und Wall.gcode gedruckt. Bei einem Druck war das tumbnail bei Druckbeginn in den Objekten, beim anderen erst danach.
Irgendwie verstehe ich das nicht mehr.

[haus-automatisierung]

@da_woody sagte in Test Adapter OctoPrint:

Irgendwie verstehe ich das nicht mehr.

Habe das Thema länger nicht angeschaut. Kannst Du mir (nochmal) eine Datei mit integriertem Thumbnail zur Verfügung stellen? Ich nutze das Feature halt überhaupt nicht Daher fällt mir das nicht auf, wenn es damit Probleme gibt

[da_Woody]

@haus-automatisierung na klar. Das Thumbnail wird in Cura ja immer erstellt. Dann wird der gcode direkt an den ender3v2 geschickt.
Im Moment noch beim Frühschoppen, irgendwo hab ich sicher noch deine Mail Adresse...
Bin schon gespannt, was ich mit dem creality K1 so erleben werde. Da ist Klipper drauf...

[da_Woody]

@haus-automatisierung mail an info@ ist raus...

[haus-automatisierung]

@da_woody Danke, ist angekommen. Gucke ich mir mal in einer ruhigen Minute an. Aber wenn Du eh zu Klipper wechselst, ...

[da_Woody]

@haus-automatisierung kein stress! nope, der ender3v2 bleibt ja wie er ist. der wird nicht umgebaut. klipper ist dann der K1!
hätte aber einen sapphire pro abzugeben, den ich mit klipper nicht zum laufen brachte...
irgend ein kack in der config.

[gelberlemmy]

@haus-automatisierung

Hallo in die Runde,

ich bin aktuell auf der Suche nach einem Workaround für meinen Octoprint Adapter.
Ich habe folgendes vor:
Auf Jarvis möchte ich Eingabefenster haben, um einfach eine Layerzahl einzugeben. Wenn der Datenpunkt der Layerzahl diesen Wert erreicht hat, möchte ich eine Benachrichtigung auf Telegramm, Pushover etc haben. Quasi ein Blockly für die Nachricht. Und die Zahlenwerte werden dann über die Eingabefenster in Jarvis in dieses eingetragen.
Folgender Hintergrund:
Ich möchte bei meinem 3D Drucker die Farbe von Hand wechseln. Dafür muss ich passend bei einem Layer an meinem Drucker sein, da dieser einen wichtigen Befehl nicht kann. Daher gibt es dort schon ein Workaround mit einem bestimmten Zeitfenster, wo ich das Filament wechseln kann.
Hat da jemand zufällig schon einmal so etwas gemacht ?

Gruß und schönes Wochenende André

[ESP8266]

@gelberlemmy , ich glaube du bist hier falsch. Hier ist ein Adapter Support.
Wenn ich da jetzt drüber nachdenke, lässt sich das durchaus mit VIS und ein paar Scripts realisieren
Die Datenpunkte wären ja da.
Aber halt hier OT

[gelberlemmy]

@esp8266 Ich hatte gehofft, dass jemand mit dem Octoprint Adapter eventuell sich so etwas schon gebaut hat.
Ich verschiebe das ganze mal 7n ein eigenes Thema