Lichtschalter und iobroker und manuelles auslösen
-
@Ente OK das müssen wir ausprobieren, da ich leider meine Sonoff geräte geflasht hab und das so nich nachmachen kann. Kannst du im IOB Objekt Browser unter userdata.0 ein neuen Datenpunkt anlegen als Logikwert
-
@Ente OK importier mal diesen Flow:
[ { "id": "95fe1d43.5b40e", "type": "ioBroker in", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "payloadType": "value", "onlyack": "", "func": "rbe", "gap": "", "fireOnStart": "false", "x": 370, "y": 340, "wires": [ [ "33ce8287.5bc756" ] ] }, { "id": "32a2cf7a.f26bd", "type": "ioBroker out", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "ack": "false", "autoCreate": "false", "stateName": "", "role": "", "payloadType": "", "readonly": "", "stateUnit": "", "stateMin": "", "stateMax": "", "x": 1010, "y": 400, "wires": [] }, { "id": "11450bfd.8107c4", "type": "ewelink-power-state-read", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 500, "y": 400, "wires": [ [ "c1a8c003.a50b8" ] ] }, { "id": "dc47e9fb.4654", "type": "ewelink-power-state-write", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 960, "y": 340, "wires": [ [] ] }, { "id": "18482006.cffd8", "type": "inject", "z": "816d1036.bc2a78", "name": "", "topic": "", "payload": " ", "payloadType": "str", "repeat": "1", "crontab": "", "once": false, "onceDelay": 0.1, "x": 310, "y": 400, "wires": [ [ "11450bfd.8107c4" ] ] }, { "id": "33ce8287.5bc756", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "true", "fromt": "str", "to": "on", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "false", "fromt": "str", "to": "off", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 640, "y": 340, "wires": [ [ "dc47e9fb.4654" ] ] }, { "id": "c1a8c003.a50b8", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "on", "fromt": "str", "to": "true", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "off", "fromt": "str", "to": "false", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 740, "y": 400, "wires": [ [ "32a2cf7a.f26bd" ] ] } ]In den beiden userdata nodes muss test groß geschrieben werden also "Test"
-
@Ente OK importier mal diesen Flow:
[ { "id": "95fe1d43.5b40e", "type": "ioBroker in", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "payloadType": "value", "onlyack": "", "func": "rbe", "gap": "", "fireOnStart": "false", "x": 370, "y": 340, "wires": [ [ "33ce8287.5bc756" ] ] }, { "id": "32a2cf7a.f26bd", "type": "ioBroker out", "z": "816d1036.bc2a78", "name": "", "topic": "0_userdata.0.example_state.test", "ack": "false", "autoCreate": "false", "stateName": "", "role": "", "payloadType": "", "readonly": "", "stateUnit": "", "stateMin": "", "stateMax": "", "x": 1010, "y": 400, "wires": [] }, { "id": "11450bfd.8107c4", "type": "ewelink-power-state-read", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 500, "y": 400, "wires": [ [ "c1a8c003.a50b8" ] ] }, { "id": "dc47e9fb.4654", "type": "ewelink-power-state-write", "z": "816d1036.bc2a78", "name": "", "deviceId": "1000519e49", "channel": 1, "auth": "", "x": 960, "y": 340, "wires": [ [] ] }, { "id": "18482006.cffd8", "type": "inject", "z": "816d1036.bc2a78", "name": "", "topic": "", "payload": " ", "payloadType": "str", "repeat": "1", "crontab": "", "once": false, "onceDelay": 0.1, "x": 310, "y": 400, "wires": [ [ "11450bfd.8107c4" ] ] }, { "id": "33ce8287.5bc756", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "true", "fromt": "str", "to": "on", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "false", "fromt": "str", "to": "off", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 640, "y": 340, "wires": [ [ "dc47e9fb.4654" ] ] }, { "id": "c1a8c003.a50b8", "type": "change", "z": "816d1036.bc2a78", "name": "", "rules": [ { "t": "change", "p": "payload", "pt": "msg", "from": "on", "fromt": "str", "to": "true", "tot": "str" }, { "t": "change", "p": "payload", "pt": "msg", "from": "off", "fromt": "str", "to": "false", "tot": "str" } ], "action": "", "property": "", "from": "", "to": "", "reg": false, "x": 740, "y": 400, "wires": [ [ "32a2cf7a.f26bd" ] ] } ]In den beiden userdata nodes muss test groß geschrieben werden also "Test"
-
@Ente Wenn du test gegen Test getauscht hast kannst du das ja mal testen. Werte auslesen und schalten in einem Datenpunkt ist in Nodered sehr kompliziert. evtl. lösen wir das gleich anders
-
@Ente Also nachmal:
[{"id":"eeaafec1.64e1c8","type":"ioBroker in","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","payloadType":"value","onlyack":"","func":"rbe","gap":"","fireOnStart":"false","x":550,"y":260,"wires":[["a0eca12f.40b61"]]},{"id":"1ee747f3.f1012","type":"ioBroker out","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","ack":"false","autoCreate":"false","stateName":"","role":"","payloadType":"","readonly":"","stateUnit":"","stateMin":"","stateMax":"","x":1320,"y":320,"wires":[]},{"id":"8ee7ecff.83d5a8","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":680,"y":320,"wires":[["884e67c2.8507a8"]]},{"id":"75ded6ec.b0fc7","type":"ewelink-power-state-write","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":1300,"y":260,"wires":[object Object]},{"id":"6789feab.7e625","type":"inject","z":"816d1036.bc2a78","name":"","topic":"","payload":" ","payloadType":"str","repeat":"1","crontab":"","once":false,"onceDelay":0.1,"x":490,"y":320,"wires":[["8ee7ecff.83d5a8"]]},{"id":"884e67c2.8507a8","type":"switch","z":"816d1036.bc2a78","name":"","property":"payload","propertyType":"msg","rules":[{"t":"cont","v":"on","vt":"str"},{"t":"cont","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":870,"y":320,"wires":[["60c17500.006144"],["c79b99e8.9954a"]]},{"id":"60c17500.006144","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"true","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":300,"wires":[["1ee747f3.f1012"]]},{"id":"c79b99e8.9954a","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"false","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":340,"wires":[["1ee747f3.f1012"]]},{"id":"a0eca12f.40b61","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"change","p":"payload","pt":"msg","from":"true","fromt":"str","to":"on","tot":"str"},{"t":"change","p":"payload","pt":"msg","from":"false","fromt":"str","to":"off","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":920,"y":260,"wires":[["75ded6ec.b0fc7"]]}] -
@Ente Also nachmal:
[{"id":"eeaafec1.64e1c8","type":"ioBroker in","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","payloadType":"value","onlyack":"","func":"rbe","gap":"","fireOnStart":"false","x":550,"y":260,"wires":[["a0eca12f.40b61"]]},{"id":"1ee747f3.f1012","type":"ioBroker out","z":"816d1036.bc2a78","name":"","topic":"0_userdata.0.example_state.Test","ack":"false","autoCreate":"false","stateName":"","role":"","payloadType":"","readonly":"","stateUnit":"","stateMin":"","stateMax":"","x":1320,"y":320,"wires":[]},{"id":"8ee7ecff.83d5a8","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":680,"y":320,"wires":[["884e67c2.8507a8"]]},{"id":"75ded6ec.b0fc7","type":"ewelink-power-state-write","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":1300,"y":260,"wires":[object Object]},{"id":"6789feab.7e625","type":"inject","z":"816d1036.bc2a78","name":"","topic":"","payload":" ","payloadType":"str","repeat":"1","crontab":"","once":false,"onceDelay":0.1,"x":490,"y":320,"wires":[["8ee7ecff.83d5a8"]]},{"id":"884e67c2.8507a8","type":"switch","z":"816d1036.bc2a78","name":"","property":"payload","propertyType":"msg","rules":[{"t":"cont","v":"on","vt":"str"},{"t":"cont","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":870,"y":320,"wires":[["60c17500.006144"],["c79b99e8.9954a"]]},{"id":"60c17500.006144","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"true","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":300,"wires":[["1ee747f3.f1012"]]},{"id":"c79b99e8.9954a","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"set","p":"payload","pt":"msg","to":"false","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":1050,"y":340,"wires":[["1ee747f3.f1012"]]},{"id":"a0eca12f.40b61","type":"change","z":"816d1036.bc2a78","name":"","rules":[{"t":"change","p":"payload","pt":"msg","from":"true","fromt":"str","to":"on","tot":"str"},{"t":"change","p":"payload","pt":"msg","from":"false","fromt":"str","to":"off","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":920,"y":260,"wires":[["75ded6ec.b0fc7"]]}] -
@CrunkFX
Böde Frage, wo soll ich denn die Werte sehen? Muss ich irgendwas in IOB oder vis integrieren? -
@Ente importier das mal, drück den Knopf links und zeig was im Debug fenster steht
[{"id":"8ee7ecff.83d5a8","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":660,"y":500,"wires":[["b7be1488.deabe"]]},{"id":"6789feab.7e625","type":"inject","z":"816d1036.bc2a78","name":"","topic":"","payload":"<-- Da klicken","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":430,"y":500,"wires":[["8ee7ecff.83d5a8"]]},{"id":"b7be1488.deabe","type":"debug","z":"816d1036.bc2a78","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","x":900,"y":500,"wires":[]}] -
@Ente importier das mal, drück den Knopf links und zeig was im Debug fenster steht
[{"id":"8ee7ecff.83d5a8","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"","deviceId":"1000519e49","channel":1,"auth":"","x":660,"y":500,"wires":[["b7be1488.deabe"]]},{"id":"6789feab.7e625","type":"inject","z":"816d1036.bc2a78","name":"","topic":"","payload":"<-- Da klicken","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":430,"y":500,"wires":[["8ee7ecff.83d5a8"]]},{"id":"b7be1488.deabe","type":"debug","z":"816d1036.bc2a78","name":"","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"false","x":900,"y":500,"wires":[]}] -
Können wir morgen weiter machen. Mein 5jähriger stand grad da, schlecht geträumt. Ich kümmere mich mal um ihn.
Bitte nicht falsch verstehen, ist echt krass, Deine Unterstützung. :-)
-
Können wir morgen weiter machen. Mein 5jähriger stand grad da, schlecht geträumt. Ich kümmere mich mal um ihn.
Bitte nicht falsch verstehen, ist echt krass, Deine Unterstützung. :-)
@Ente Ich hab mal bei mit einen Sonoff 4ch R2 in eWeLink eingebunden. Die API ist wirklich sehr schlecht von eWeLink. Das könnte einder der gründe sein warum das vorher bei dir nicht funktioniert hat. Wie auch immer, ich hab mir einen kleinen Flow gebastelt, mit dem schalten und abfragen in einem Datenpunkt möglich ist. Wichtig ist das der Taster nicht schnell hintereinander betätigt oder abgefragt wird, da sonst "Err 503" kommt. Probier mal diesen Flow aus, ich sollte alle deine Angaben korrekt eingefügt haben, du kannst aber gerne nochmal nachschauen ob Device ID und IOB Datenpunkt korrekt sind.
[{"id":"95fe1d43.5b40e","type":"ioBroker in","z":"816d1036.bc2a78","name":"IOB Datenpunkt","topic":"0_userdata.0.example_state.Test","payloadType":"value","onlyack":"","func":"rbe","gap":"","fireOnStart":"false","x":340,"y":160,"wires":[["33ce8287.5bc756"]]},{"id":"32a2cf7a.f26bd","type":"ioBroker out","z":"816d1036.bc2a78","name":"IOB Datenpunkt","topic":"0_userdata.0.example_state.Text","ack":"false","autoCreate":"false","stateName":"","role":"","payloadType":"","readonly":"","stateUnit":"","stateMin":"","stateMax":"","x":980,"y":280,"wires":[]},{"id":"11450bfd.8107c4","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"Zustand abfragen","deviceId":"1000519e49","channel":1,"auth":"f9622a6.c35c9d8","x":550,"y":220,"wires":[["b9390314.6cf9f"]]},{"id":"dc47e9fb.4654","type":"ewelink-power-state-write","z":"816d1036.bc2a78","name":"eWeLink Status senden","deviceId":"1000519e49","channel":1,"auth":"f9622a6.c35c9d8","x":1070,"y":160,"wires":[object Object]},{"id":"33ce8287.5bc756","type":"change","z":"816d1036.bc2a78","name":"Werte konvertieren","rules":[{"t":"change","p":"payload","pt":"msg","from":"true","fromt":"str","to":"on","tot":"str"},{"t":"change","p":"payload","pt":"msg","from":"false","fromt":"str","to":"off","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":530,"y":160,"wires":[["f6d231f2.e928f"]]},{"id":"c1a8c003.a50b8","type":"change","z":"816d1036.bc2a78","name":"An in Bool konvertieren","rules":[{"t":"set","p":"payload","pt":"msg","to":"true","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":770,"y":260,"wires":[["32a2cf7a.f26bd"]]},{"id":"fc6b2932.787fb8","type":"switch","z":"816d1036.bc2a78","name":"On Off Filter","property":"payload","propertyType":"msg","rules":[{"t":"cont","v":"on","vt":"str"},{"t":"cont","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":990,"y":220,"wires":[["c1a8c003.a50b8"],["33c0bd48.c102e2"]]},{"id":"33c0bd48.c102e2","type":"change","z":"816d1036.bc2a78","name":"Aus in Bool konvertieren","rules":[{"t":"set","p":"payload","pt":"msg","to":"false","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":770,"y":300,"wires":[["32a2cf7a.f26bd"]]},{"id":"b9390314.6cf9f","type":"json","z":"816d1036.bc2a78","name":"JSON in String konvertieren","property":"payload","action":"","pretty":false,"x":780,"y":220,"wires":[["fc6b2932.787fb8"]]},{"id":"9979a035.4da09","type":"ewelink-event-listener","z":"816d1036.bc2a78","name":"Änderung abfragen","deviceId":"1000519e49","auth":"f9622a6.c35c9d8","x":350,"y":220,"wires":[["11450bfd.8107c4","aabd4846.2161e8"]]},{"id":"57fcee70.43879","type":"change","z":"816d1036.bc2a78","name":"Zustandsüberwachung unterbrechen","rules":[{"t":"set","p":"payload","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":810,"y":360,"wires":[object Object]},{"id":"aabd4846.2161e8","type":"trigger","z":"816d1036.bc2a78","op1":"ok","op2":"nok","op1type":"str","op2type":"str","duration":"300","extend":false,"units":"ms","reset":"","bytopic":"all","name":"","x":540,"y":360,"wires":[["57fcee70.43879"]]},{"id":"f6d231f2.e928f","type":"switch","z":"816d1036.bc2a78","name":"Zustandsüberwachung unterbrechen","property":"payload","propertyType":"flow","rules":[{"t":"neq","v":"ok","vt":"str"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":790,"y":160,"wires":[["dc47e9fb.4654"],[]]},{"id":"f9622a6.c35c9d8","type":"ewelink-credentials","z":""}]MFG
CrunkFX -
@Ente Ich hab mal bei mit einen Sonoff 4ch R2 in eWeLink eingebunden. Die API ist wirklich sehr schlecht von eWeLink. Das könnte einder der gründe sein warum das vorher bei dir nicht funktioniert hat. Wie auch immer, ich hab mir einen kleinen Flow gebastelt, mit dem schalten und abfragen in einem Datenpunkt möglich ist. Wichtig ist das der Taster nicht schnell hintereinander betätigt oder abgefragt wird, da sonst "Err 503" kommt. Probier mal diesen Flow aus, ich sollte alle deine Angaben korrekt eingefügt haben, du kannst aber gerne nochmal nachschauen ob Device ID und IOB Datenpunkt korrekt sind.
[{"id":"95fe1d43.5b40e","type":"ioBroker in","z":"816d1036.bc2a78","name":"IOB Datenpunkt","topic":"0_userdata.0.example_state.Test","payloadType":"value","onlyack":"","func":"rbe","gap":"","fireOnStart":"false","x":340,"y":160,"wires":[["33ce8287.5bc756"]]},{"id":"32a2cf7a.f26bd","type":"ioBroker out","z":"816d1036.bc2a78","name":"IOB Datenpunkt","topic":"0_userdata.0.example_state.Text","ack":"false","autoCreate":"false","stateName":"","role":"","payloadType":"","readonly":"","stateUnit":"","stateMin":"","stateMax":"","x":980,"y":280,"wires":[]},{"id":"11450bfd.8107c4","type":"ewelink-power-state-read","z":"816d1036.bc2a78","name":"Zustand abfragen","deviceId":"1000519e49","channel":1,"auth":"f9622a6.c35c9d8","x":550,"y":220,"wires":[["b9390314.6cf9f"]]},{"id":"dc47e9fb.4654","type":"ewelink-power-state-write","z":"816d1036.bc2a78","name":"eWeLink Status senden","deviceId":"1000519e49","channel":1,"auth":"f9622a6.c35c9d8","x":1070,"y":160,"wires":[object Object]},{"id":"33ce8287.5bc756","type":"change","z":"816d1036.bc2a78","name":"Werte konvertieren","rules":[{"t":"change","p":"payload","pt":"msg","from":"true","fromt":"str","to":"on","tot":"str"},{"t":"change","p":"payload","pt":"msg","from":"false","fromt":"str","to":"off","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":530,"y":160,"wires":[["f6d231f2.e928f"]]},{"id":"c1a8c003.a50b8","type":"change","z":"816d1036.bc2a78","name":"An in Bool konvertieren","rules":[{"t":"set","p":"payload","pt":"msg","to":"true","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":770,"y":260,"wires":[["32a2cf7a.f26bd"]]},{"id":"fc6b2932.787fb8","type":"switch","z":"816d1036.bc2a78","name":"On Off Filter","property":"payload","propertyType":"msg","rules":[{"t":"cont","v":"on","vt":"str"},{"t":"cont","v":"off","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":990,"y":220,"wires":[["c1a8c003.a50b8"],["33c0bd48.c102e2"]]},{"id":"33c0bd48.c102e2","type":"change","z":"816d1036.bc2a78","name":"Aus in Bool konvertieren","rules":[{"t":"set","p":"payload","pt":"msg","to":"false","tot":"bool"}],"action":"","property":"","from":"","to":"","reg":false,"x":770,"y":300,"wires":[["32a2cf7a.f26bd"]]},{"id":"b9390314.6cf9f","type":"json","z":"816d1036.bc2a78","name":"JSON in String konvertieren","property":"payload","action":"","pretty":false,"x":780,"y":220,"wires":[["fc6b2932.787fb8"]]},{"id":"9979a035.4da09","type":"ewelink-event-listener","z":"816d1036.bc2a78","name":"Änderung abfragen","deviceId":"1000519e49","auth":"f9622a6.c35c9d8","x":350,"y":220,"wires":[["11450bfd.8107c4","aabd4846.2161e8"]]},{"id":"57fcee70.43879","type":"change","z":"816d1036.bc2a78","name":"Zustandsüberwachung unterbrechen","rules":[{"t":"set","p":"payload","pt":"flow","to":"payload","tot":"msg"}],"action":"","property":"","from":"","to":"","reg":false,"x":810,"y":360,"wires":[object Object]},{"id":"aabd4846.2161e8","type":"trigger","z":"816d1036.bc2a78","op1":"ok","op2":"nok","op1type":"str","op2type":"str","duration":"300","extend":false,"units":"ms","reset":"","bytopic":"all","name":"","x":540,"y":360,"wires":[["57fcee70.43879"]]},{"id":"f6d231f2.e928f","type":"switch","z":"816d1036.bc2a78","name":"Zustandsüberwachung unterbrechen","property":"payload","propertyType":"flow","rules":[{"t":"neq","v":"ok","vt":"str"},{"t":"else"}],"checkall":"true","repair":false,"outputs":2,"x":790,"y":160,"wires":[["dc47e9fb.4654"],[]]},{"id":"f9622a6.c35c9d8","type":"ewelink-credentials","z":""}]MFG
CrunkFX@CrunkFX said in Lichtschalter und iobroker und manuelles auslösen:
Danke für den Flow. Habe ihn importiert. Alles auf grün:
Der node Auslöser 300 macht kurz einen grünen Punkt, wenn ich das Licht via Alexa schalte.
Bei object, object ändert sich nichts.Was mache ich als nächsten Schritt?
-
@CrunkFX said in Lichtschalter und iobroker und manuelles auslösen:
Danke für den Flow. Habe ihn importiert. Alles auf grün:
Der node Auslöser 300 macht kurz einen grünen Punkt, wenn ich das Licht via Alexa schalte.
Bei object, object ändert sich nichts.Was mache ich als nächsten Schritt?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
283
Online32.7k
Benutzer82.6k
Themen1.3m
Beiträge