Nach Update läuft nichts mehr!
-
@SaschaS sagte in Nach Update läuft nichts mehr!:
Jetzt schauen wir uns erstmal die 29 anderen Pakte an, die da noch nebenan liegen:apt list --upgradable apt --dry-run dist-upgrade -
pi@raspberrypi:~ $ apt list --upgradable Auflistung... Fertig apt/oldstable 1.4.10 armhf [aktualisierbar von: 1.4.9] apt-transport-https/oldstable 1.4.10 armhf [aktualisierbar von: 1.4.9] apt-utils/oldstable 1.4.10 armhf [aktualisierbar von: 1.4.9] bind9-host/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libapt-inst2.0/oldstable 1.4.10 armhf [aktualisierbar von: 1.4.9] libapt-pkg5.0/oldstable 1.4.10 armhf [aktualisierbar von: 1.4.9] libbind9-140/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libdns-export162/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libdns162/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libisc-export160/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libisc160/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libisccc140/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libisccfg140/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] liblwres141/oldstable 1:9.10.3.dfsg.P4-12.3+deb9u6 armhf [aktualisierbar von: 1:9.10.3.dfsg.P4-12.3+deb9u4] libvlc-bin/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] libvlc5/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] libvlccore9/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-bin/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-data/oldstable 3.0.10-0+deb9u1 all [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-l10n/oldstable 3.0.10-0+deb9u1 all [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-base/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-notify/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-qt/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-samba/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-skins2/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-video-output/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-video-splitter/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] vlc-plugin-visualization/oldstable 3.0.10-0+deb9u1 armhf [aktualisierbar von: 3.0.8-0+deb9u1+rpt1] pi@raspberrypi:~ $ apt --dry-run dist-upgrade HINWEIS: Dies ist nur eine Simulation! apt benötigt root-Privilegien für die reale Ausführung. Behalten Sie ebenfalls in Hinterkopf, dass die Sperren deaktiviert sind, verlassen Sie sich also bezüglich des reellen aktuellen Status der Sperre nicht darauf! Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt: libmicrodns0 Verwenden Sie »apt autoremove«, um es zu entfernen. Die folgenden NEUEN Pakete werden installiert: libbluray1 Die folgenden Pakete werden aktualisiert (Upgrade): apt apt-transport-https apt-utils bind9-host libapt-inst2.0 libapt-pkg5.0 libbind9-140 libdns-export162 libdns162 libisc-export160 libisc160 libisccc140 libisccfg140 liblwres141 libvlc-bin libvlc5 libvlccore9 vlc vlc-bin vlc-data vlc-l10n vlc-plugin-base vlc-plugin-notify vlc-plugin-qt vlc-plugin-samba vlc-plugin-skins2 vlc-plugin-video-output vlc-plugin-video-splitter vlc-plugin-visualization 29 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Inst libapt-pkg5.0 [1.4.9] (1.4.10 Raspbian:oldstable [armhf]) Conf libapt-pkg5.0 (1.4.10 Raspbian:oldstable [armhf]) Inst libapt-inst2.0 [1.4.9] (1.4.10 Raspbian:oldstable [armhf]) Inst apt [1.4.9] (1.4.10 Raspbian:oldstable [armhf]) [apt-utils:armhf ] Conf apt (1.4.10 Raspbian:oldstable [armhf]) [apt-utils:armhf ] Inst apt-utils [1.4.9] (1.4.10 Raspbian:oldstable [armhf]) Inst libvlccore9 [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst libvlc5 [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst vlc-plugin-skins2 [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst vlc [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst vlc-plugin-qt [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst vlc-bin [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst libvlc-bin [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst vlc-plugin-video-output [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst libbluray1 (1:0.9.3-4 Raspberry Pi Foundation:stable [armhf]) [] Inst vlc-l10n [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [all]) [] Inst vlc-plugin-base [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) [] Inst vlc-data [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [all]) Inst vlc-plugin-notify [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst vlc-plugin-samba [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst vlc-plugin-video-splitter [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst vlc-plugin-visualization [3.0.8-0+deb9u1+rpt1] (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Inst bind9-host [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst libisc160 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst libdns162 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst libisccc140 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst libisccfg140 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst libbind9-140 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) [] Inst liblwres141 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Inst apt-transport-https [1.4.9] (1.4.10 Raspbian:oldstable [armhf]) Inst libisc-export160 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Inst libdns-export162 [1:9.10.3.dfsg.P4-12.3+deb9u4] (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libapt-inst2.0 (1.4.10 Raspbian:oldstable [armhf]) Conf apt-utils (1.4.10 Raspbian:oldstable [armhf]) Conf libvlccore9 (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf libvlc5 (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-skins2 (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-qt (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-bin (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf libvlc-bin (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-video-output (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf libbluray1 (1:0.9.3-4 Raspberry Pi Foundation:stable [armhf]) Conf vlc-l10n (3.0.10-0+deb9u1 Raspbian:oldstable [all]) Conf vlc-plugin-base (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-data (3.0.10-0+deb9u1 Raspbian:oldstable [all]) Conf vlc-plugin-notify (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-samba (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-video-splitter (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf vlc-plugin-visualization (3.0.10-0+deb9u1 Raspbian:oldstable [armhf]) Conf bind9-host (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libisc160 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libdns162 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libisccc140 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libisccfg140 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libbind9-140 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf liblwres141 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf apt-transport-https (1.4.10 Raspbian:oldstable [armhf]) Conf libisc-export160 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) Conf libdns-export162 (1:9.10.3.dfsg.P4-12.3+deb9u6 Raspbian:oldstable [armhf]) -
-
Welcome Back! Wie war die Ausfahrt? Wetter war ja Bombe dafür!
Ganz überlesen... Danke schön, Ausfahrt war sehr entspannend.
-
@Thomas-Braun Neugestartet nach dem Upgrade
pi@raspberrypi:~ $ sudo apt dist-upgrade Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt: libmicrodns0 Verwenden Sie »sudo apt autoremove«, um es zu entfernen. Die folgenden NEUEN Pakete werden installiert: libbluray1 Die folgenden Pakete werden aktualisiert (Upgrade): apt apt-transport-https apt-utils bind9-host libapt-inst2.0 libapt-pkg5.0 libbind9-140 libdns-export162 libdns162 libisc-export160 libisc160 libisccc140 libisccfg140 liblwres141 libvlc-bin libvlc5 libvlccore9 vlc vlc-bin vlc-data vlc-l10n vlc-plugin-base vlc-plugin-notify vlc-plugin-qt vlc-plugin-samba vlc-plugin-skins2 vlc-plugin-video-output vlc-plugin-video-splitter vlc-plugin-visualization 29 aktualisiert, 1 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 18,7 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 108 kB Plattenplatz freigegeben. Möchten Sie fortfahren? [J/n] Holen:1 http://archive.raspberrypi.org/debian stretch/main armhf libbluray1 armhf 1:0.9.3-4 [124 kB] Holen:2 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libapt-pkg5.0 armhf 1.4.10 [833 kB] Holen:3 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libapt-inst2.0 armhf 1.4.10 [189 kB] Holen:4 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf apt armhf 1.4.10 [1.190 kB] Holen:5 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf apt-utils armhf 1.4.10 [392 kB] Holen:6 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libvlccore9 armhf 3.0.10-0+deb9u1 [490 kB] Holen:7 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libvlc5 armhf 3.0.10-0+deb9u1 [167 kB] Holen:8 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-skins2 armhf 3.0.10-0+deb9u1 [523 kB] Holen:9 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc armhf 3.0.10-0+deb9u1 [141 kB] Holen:10 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-qt armhf 3.0.10-0+deb9u1 [1.049 kB] Holen:11 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-bin armhf 3.0.10-0+deb9u1 [159 kB] Holen:12 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libvlc-bin armhf 3.0.10-0+deb9u1 [124 kB] Holen:13 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-video-output armhf 3.0.10-0+deb9u1 [237 kB] Holen:14 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-l10n all 3.0.10-0+deb9u1 [5.861 kB] Holen:17 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian stretch/main armhf vlc-plugin-notify armhf 3.0.10-0+deb9u1 [126 kB] Holen:15 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-base armhf 3.0.10-0+deb9u1 [2.600 kB] Holen:16 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-data all 3.0.10-0+deb9u1 [448 kB] Holen:18 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-samba armhf 3.0.10-0+deb9u1 [126 kB] Holen:19 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-video-splitter armhf 3.0.10-0+deb9u1 [139 kB] Holen:20 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf vlc-plugin-visualization armhf 3.0.10-0+deb9u1 [140 kB] Holen:21 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf bind9-host armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [231 kB] Holen:22 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libisc160 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [366 kB] Holen:23 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libdns162 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [951 kB] Holen:24 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libisccc140 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [197 kB] Holen:25 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libisccfg140 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [215 kB] Holen:26 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libbind9-140 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [204 kB] Holen:27 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf liblwres141 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [210 kB] Holen:28 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf apt-transport-https armhf 1.4.10 [166 kB] Holen:29 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libisc-export160 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [316 kB] Holen:30 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian stretch/main armhf libdns-export162 armhf 1:9.10.3.dfsg.P4-12.3+deb9u6 [767 kB] Es wurden 18,7 MB in 13 s geholt (1.423 kB/s). Lese Changelogs... Fertig (Lese Datenbank ... 55248 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../libapt-pkg5.0_1.4.10_armhf.deb ... Entpacken von libapt-pkg5.0:armhf (1.4.10) über (1.4.9) ... libapt-pkg5.0:armhf (1.4.10) wird eingerichtet ... (Lese Datenbank ... 55248 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../libapt-inst2.0_1.4.10_armhf.deb ... Entpacken von libapt-inst2.0:armhf (1.4.10) über (1.4.9) ... Vorbereitung zum Entpacken von .../archives/apt_1.4.10_armhf.deb ... Entpacken von apt (1.4.10) über (1.4.9) ... apt (1.4.10) wird eingerichtet ... (Lese Datenbank ... 55248 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-apt-utils_1.4.10_armhf.deb ... Entpacken von apt-utils (1.4.10) über (1.4.9) ... Vorbereitung zum Entpacken von .../01-libvlccore9_3.0.10-0+deb9u1_armhf.deb ... Entpacken von libvlccore9:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../02-libvlc5_3.0.10-0+deb9u1_armhf.deb ... Entpacken von libvlc5:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../03-vlc-plugin-skins2_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-skins2:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../04-vlc_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../05-vlc-plugin-qt_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-qt:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../06-vlc-bin_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-bin (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../07-libvlc-bin_3.0.10-0+deb9u1_armhf.deb ... Entpacken von libvlc-bin:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../08-vlc-plugin-video-output_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-video-output:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vormals nicht ausgewähltes Paket libbluray1:armhf wird gewählt. Vorbereitung zum Entpacken von .../09-libbluray1_1%3a0.9.3-4_armhf.deb ... Entpacken von libbluray1:armhf (1:0.9.3-4) ... Vorbereitung zum Entpacken von .../10-vlc-l10n_3.0.10-0+deb9u1_all.deb ... Entpacken von vlc-l10n (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../11-vlc-plugin-base_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-base:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../12-vlc-data_3.0.10-0+deb9u1_all.deb ... Entpacken von vlc-data (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../13-vlc-plugin-notify_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-notify:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../14-vlc-plugin-samba_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-samba:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../15-vlc-plugin-video-splitter_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-video-splitter:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../16-vlc-plugin-visualization_3.0.10-0+deb9u1_armhf.deb ... Entpacken von vlc-plugin-visualization:armhf (3.0.10-0+deb9u1) über (3.0.8-0+deb9u1+rpt1) ... Vorbereitung zum Entpacken von .../17-bind9-host_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von bind9-host (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../18-libisc160_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libisc160:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../19-libdns162_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libdns162:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../20-libisccc140_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libisccc140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../21-libisccfg140_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libisccfg140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../22-libbind9-140_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libbind9-140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../23-liblwres141_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von liblwres141:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../24-apt-transport-https_1.4.10_armhf.deb ... Entpacken von apt-transport-https (1.4.10) über (1.4.9) ... Vorbereitung zum Entpacken von .../25-libisc-export160_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libisc-export160 (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... Vorbereitung zum Entpacken von .../26-libdns-export162_1%3a9.10.3.dfsg.P4-12.3+deb9u6_armhf.deb ... Entpacken von libdns-export162 (1:9.10.3.dfsg.P4-12.3+deb9u6) über (1:9.10.3.dfsg.P4-12.3+deb9u4) ... libapt-inst2.0:armhf (1.4.10) wird eingerichtet ... apt-transport-https (1.4.10) wird eingerichtet ... libisc160:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... libisc-export160 (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... Trigger für mime-support (3.60) werden verarbeitet ... vlc-data (3.0.10-0+deb9u1) wird eingerichtet ... apt-utils (1.4.10) wird eingerichtet ... libdns-export162 (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... vlc-l10n (3.0.10-0+deb9u1) wird eingerichtet ... libisccc140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... Trigger für libc-bin (2.24-11+deb9u4) werden verarbeitet ... libvlccore9:armhf (3.0.10-0+deb9u1) wird eingerichtet ... vlc-plugin-video-splitter:armhf (3.0.10-0+deb9u1) wird eingerichtet ... libbluray1:armhf (1:0.9.3-4) wird eingerichtet ... liblwres141:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... Trigger für man-db (2.7.6.1-2) werden verarbeitet ... vlc-plugin-visualization:armhf (3.0.10-0+deb9u1) wird eingerichtet ... vlc-plugin-notify:armhf (3.0.10-0+deb9u1) wird eingerichtet ... Trigger für hicolor-icon-theme (0.15-1) werden verarbeitet ... vlc-plugin-base:armhf (3.0.10-0+deb9u1) wird eingerichtet ... libdns162:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... libvlc5:armhf (3.0.10-0+deb9u1) wird eingerichtet ... vlc-plugin-samba:armhf (3.0.10-0+deb9u1) wird eingerichtet ... libisccfg140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... vlc-plugin-qt:armhf (3.0.10-0+deb9u1) wird eingerichtet ... vlc-plugin-video-output:armhf (3.0.10-0+deb9u1) wird eingerichtet ... libvlc-bin:armhf (3.0.10-0+deb9u1) wird eingerichtet ... vlc-plugin-skins2:armhf (3.0.10-0+deb9u1) wird eingerichtet ... libbind9-140:armhf (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... vlc-bin (3.0.10-0+deb9u1) wird eingerichtet ... bind9-host (1:9.10.3.dfsg.P4-12.3+deb9u6) wird eingerichtet ... vlc (3.0.10-0+deb9u1) wird eingerichtet ... Trigger für libc-bin (2.24-11+deb9u4) werden verarbeitet ... Trigger für libvlc-bin:armhf (3.0.10-0+deb9u1) werden verarbeitet ... -
@SaschaS
Okay, dann noch einsudo apt autoremovehinterhergeworfen. Und dann sollte ein
sudo apt updateerzählen, dass alle Pakete aktuell sind.
-
@Thomas-Braun said in Nach Update läuft nichts mehr!:
sudo apt update
Er rödelt noch, aber warum...:-( warum schon wieder node 8
pi@raspberrypi:~ $ sudo apt update OK:1 http://phoscon.de/apt/deconz stretch InRelease Holen:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15,0 kB] Holen:3 http://archive.raspberrypi.org/debian stretch InRelease [25,4 kB] OK:4 https://deb.nodesource.com/node_8.x stretch InRelease Holen:5 http://archive.raspberrypi.org/debian stretch/main armhf Packages [201 kB] Holen:6 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11,7 MB] Es wurden 11,9 MB in 18 s geholt (645 kB/s). -
@SaschaS Ich habe keine Ahnung, was du da machst, aber in der nodesource.list steht immer noch die 8 statt der 12 drin...
-
@SaschaS
So muss das ungefähr aussehen:deb https://deb.nodesource.com/node_12.x stretch main deb-src https://deb.nodesource.com/node_12.x stretch main -
@Thomas-Braun Ich mach genau das, was du/ihr mir sagt..ich verstehe es auch nicht, warum jetzt in der nodesource.list wieder die 8 steht. Du hast doch oben gesehen, dass er die 12 übernommen hatte..
Er findet übrigens 29 Pakte, die er aktualisieren möchte..
pi@raspberrypi:~ $ sudo apt update OK:1 http://phoscon.de/apt/deconz stretch InRelease Holen:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15,0 kB] Holen:3 http://archive.raspberrypi.org/debian stretch InRelease [25,4 kB] OK:4 https://deb.nodesource.com/node_8.x stretch InRelease Holen:5 http://archive.raspberrypi.org/debian stretch/main armhf Packages [201 kB] Holen:6 http://raspbian.raspberrypi.org/raspbian stretch/main armhf Packages [11,7 MB] Es wurden 11,9 MB in 18 s geholt (645 kB/s). Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 29 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. -
Hallo Experten,
ich möchte hier nicht den thread spammen aber ich frage mich gerade, ob der Hinweis aus dem thread über das vorgeschlagene Update von NodeJS nicht viel Zeit gespart hätte. Da steht:Er hätte damit das Verzeichnis /opt/iobroker/iobroker-data gesichert und mit den anschließenden Befehlen ioBroker neu installiert und alle Adapter aktualisiert... Wäre das nicht eine Option gewesen?
Unabhängig davon wissen wir jetzt, wer die Linux-Experten sind. War sehr interessant.
Grüße -
@Thomas-Braun said in Nach Update läuft nichts mehr!:
@SaschaS
So muss das ungefähr aussehen:deb https://deb.nodesource.com/node_12.x stretch main deb-src https://deb.nodesource.com/node_12.x stretch mainLogisch. Hat es ja auch ausgesehen. Hier der Beweis dafür:
pi@raspberrypi:~ $ sudo tail /etc/apt/sources.list.d/nodesource.list deb https://deb.nodesource.com/node_12.x stretch main deb-src https://deb.nodesource.com/node_12.x stretch mainAber offenbar gibt es irgendeine Störkomponenten, die da dann wieder eine 8 einträgt. Ich bin es definitiv nicht.
-
Wtf? Kann es sein, dass das Dateisystem nur 'lesend' eingehängt ist?
Die 29 Updates sind ja auch wieder da...cat /etc/fstab mount | sort -
@Thomas-Braun said in Nach Update läuft nichts mehr!:
mount | sort
Davon verstehe ich jetzt gar nicht mehr. Aber hier der Output:
pi@raspberrypi:~ $ cat /etc/fstab proc /proc proc defaults 0 0 PARTUUID=b73bd0c1-01 /boot vfat defaults 0 2 PARTUUID=b73bd0c1-02 / ext4 defaults,noatime 0 1 # a swapfile is not a swap partition, no line here # use dphys-swapfile swap[on|off] for that pi@raspberrypi:~ $ mount | sort cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory) cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls) cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd) configfs on /sys/kernel/config type configfs (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) /dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) /dev/mmcblk0p2 on / type ext4 (rw,noatime) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) devtmpfs on /dev type devtmpfs (rw,relatime,size=469544k,nr_inodes=117386,mode=755) mqueue on /dev/mqueue type mqueue (rw,relatime) proc on /proc type proc (rw,relatime) sunrpc on /run/rpc_pipefs type rpc_pipefs (rw,relatime) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=94828k,mode=700,uid=1000,gid=1000) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) -
@XxJooO sagte in Nach Update läuft nichts mehr!:
Hallo Experten,
ich möchte hier nicht den thread spammen aber ich frage mich gerade, ob der Hinweis aus dem thread über das vorgeschlagene Update von NodeJS nicht viel Zeit gespart hätte. Da steht:Er hätte damit das Verzeichnis /opt/iobroker/iobroker-data gesichert und mit den anschließenden Befehlen ioBroker neu installiert und alle Adapter aktualisiert... Wäre das nicht eine Option gewesen?
Unabhängig davon wissen wir jetzt, wer die Linux-Experten sind. War sehr interessant.
GrüßeOkay, das sehe ich ein - man kann halt nie alle mit einbeziehen, aber natürlich bist Du nach meinen Forum-Beaobachtungen bei Linux total fit. Das wird hier zukünftig aber schwierig, wenn man immer alle Protagonisten erwähnen muss, um einen Beitrag oder eine Einstellung/Meinung zu posten.
-
-
@Thomas-Braun Ich hab gerade einen Neustart gemacht. Und schwupps stand wieder die 8 in der nodesource.list Kann das dass Problem der ganzen Geschichte sein...
pi@raspberrypi:~ $ sudo tail /etc/apt/sources.list.d/nodesource.list deb https://deb.nodesource.com/node_8.x stretch main deb-src https://deb.nodesource.com/node_8.x stretch main@XxJooO, @Meister-Mopper Bitte nicht falsch verstehen, oder denken ich wäre unhöflich. Ich bin kein Profi und versuche immer nur einer Spur zu folgen. Daher entschuldigt bitte, dass ich eurer Spur (noch) nicht gefolgt bin.
-
@Thomas-Braun said in Nach Update läuft nichts mehr!:
Könnte recht viel output werden, aber da scheint es tiefer zu klemmen:
dmesgHört sich nach nichts gutem an, wenn du das so sagst.
pi@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=b73bd0c1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939088K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23472K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 630 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 26394 entries in 78 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000291] Console: colour dummy device 80x30 [ 0.000915] console [tty1] enabled [ 0.000972] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001017] pid_max: default: 32768 minimum: 301 [ 0.001372] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001408] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002340] CPU: Testing write buffer coherency: ok [ 0.002831] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003499] Setting up static identity map for 0x100000 - 0x10003c [ 0.003666] rcu: Hierarchical SRCU implementation. [ 0.004481] smp: Bringing up secondary CPUs ... [ 0.005346] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006274] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007140] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007261] smp: Brought up 1 node, 4 CPUs [ 0.007343] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007367] CPU: All CPU(s) started in HYP mode. [ 0.007388] CPU: Virtualization extensions available. [ 0.008379] devtmpfs: initialized [ 0.021397] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.021671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021719] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.022325] pinctrl core: initialized pinctrl subsystem [ 0.023198] NET: Registered protocol family 16 [ 0.026153] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031850] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031887] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.032107] Serial: AMBA PL011 UART driver [ 0.034415] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.069303] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071236] SCSI subsystem initialized [ 0.071483] usbcore: registered new interface driver usbfs [ 0.071564] usbcore: registered new interface driver hub [ 0.071677] usbcore: registered new device driver usb [ 0.090304] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start [ 0.100132] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3 [ 0.111763] clocksource: Switched to clocksource arch_sys_counter [ 0.200931] VFS: Disk quotas dquot_6.6.0 [ 0.201042] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.201219] FS-Cache: Loaded [ 0.201446] CacheFiles: Loaded [ 0.211475] NET: Registered protocol family 2 [ 0.212296] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.212360] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.212491] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.212695] TCP: Hash tables configured (established 8192 bind 8192) [ 0.212855] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.212921] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.213251] NET: Registered protocol family 1 [ 0.213821] RPC: Registered named UNIX socket transport module. [ 0.213848] RPC: Registered udp transport module. [ 0.213870] RPC: Registered tcp transport module. [ 0.213892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.215579] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.218611] Initialise system trusted keyrings [ 0.218819] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.228823] FS-Cache: Netfs 'nfs' registered for caching [ 0.229423] NFS: Registering the id_resolver key type [ 0.229476] Key type id_resolver registered [ 0.229498] Key type id_legacy registered [ 0.229530] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.231870] Key type asymmetric registered [ 0.231900] Asymmetric key parser 'x509' registered [ 0.231968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.232148] io scheduler noop registered [ 0.232172] io scheduler deadline registered (default) [ 0.232365] io scheduler cfq registered [ 0.232389] io scheduler mq-deadline registered (default) [ 0.232413] io scheduler kyber registered [ 0.234614] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.244038] Console: switching to colour frame buffer device 82x26 [ 0.250847] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.257552] bcm2835-rng 3f104000.rng: hwrng registered [ 0.260218] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.265532] vc-sm: Videocore shared memory driver [ 0.268278] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.284167] brd: module loaded [ 0.296827] loop: module loaded [ 0.299870] Loading iSCSI transport class v2.0-870. [ 0.303047] libphy: Fixed MDIO Bus: probed [ 0.305557] usbcore: registered new interface driver lan78xx [ 0.308016] usbcore: registered new interface driver smsc95xx [ 0.310369] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.340672] dwc_otg 3f980000.usb: base=(ptrval) [ 0.543326] Core Release: 2.80a [ 0.545705] Setting default values for core params [ 0.548146] Finished setting default values for core params [ 0.750882] Using Buffer DMA mode [ 0.753288] Periodic Transfer Interrupt Enhancement - disabled [ 0.755713] Multiprocessor Interrupt Enhancement - disabled [ 0.758082] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.760426] Dedicated Tx FIFOs mode [ 0.763148] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024 [ 0.767725] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.778632] dwc_otg: Microframe scheduler enabled [ 0.778693] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.780921] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36 [ 0.783137] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.785398] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.787660] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.789984] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.792310] Init: Port Power? op_state=1 [ 0.794554] Init: Power Port (0) [ 0.796971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.801482] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803926] usb usb1: Product: DWC OTG Controller [ 0.806298] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd [ 0.808721] usb usb1: SerialNumber: 3f980000.usb [ 0.811671] hub 1-0:1.0: USB hub found [ 0.813966] hub 1-0:1.0: 1 port detected [ 0.816728] dwc_otg: FIQ enabled [ 0.816734] dwc_otg: NAK holdoff enabled [ 0.816739] dwc_otg: FIQ split-transaction FSM enabled [ 0.816751] Module dwc_common_port init [ 0.817047] usbcore: registered new interface driver usb-storage [ 0.819503] mousedev: PS/2 mouse device common for all mice [ 0.822679] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.825308] bcm2835-cpufreq: min=600000 max=1400000 [ 0.828125] sdhci: Secure Digital Host Controller Interface driver [ 0.830536] sdhci: Copyright(c) Pierre Ossman [ 0.833334] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [ 0.836240] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.838913] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.843040] ledtrig-cpu: registered to indicate activity on CPUs [ 0.845771] hidraw: raw HID events driver (C) Jiri Kosina [ 0.848539] usbcore: registered new interface driver usbhid [ 0.851170] usbhid: USB HID core driver [ 0.854510] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.858634] [vc_sm_connected_init]: start [ 0.867387] [vc_sm_connected_init]: end - returning 0 [ 0.870923] Initializing XFRM netlink socket [ 0.873385] NET: Registered protocol family 17 [ 0.875887] Key type dns_resolver registered [ 0.878730] Registering SWP/SWPB emulation handler [ 0.881867] registered taskstats version 1 [ 0.884278] Loading compiled-in X.509 certificates [ 0.893906] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.896435] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 0.903323] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.905861] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 0.934469] sdhost: log_buf @ (ptrval) (fad13000) [ 0.973197] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.977165] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.981022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.983263] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.986727] of_cfs_init [ 0.988920] of_cfs_init: OK [ 0.991536] Waiting for root device PARTUUID=b73bd0c1-02... [ 1.007861] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.041890] Indeed it is in host mode hprt0 = 00021501 [ 1.109919] random: fast init done [ 1.128667] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.137015] mmc0: new high speed SDHC card at address aaaa [ 1.140537] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 1.146816] mmcblk0: p1 p2 [ 1.152470] mmc1: new high speed SDIO card at address 0001 [ 1.176868] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 1.179170] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.251809] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.254250] Indeed it is in host mode hprt0 = 00001101 [ 1.492116] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.496873] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.500217] hub 1-1:1.0: USB hub found [ 1.502964] hub 1-1:1.0: 4 ports detected [ 1.511454] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 1.573266] EXT4-fs (mmcblk0p2): 12 orphan inodes deleted [ 1.575984] EXT4-fs (mmcblk0p2): recovery complete [ 1.751259] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.756582] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.771023] devtmpfs: mounted [ 1.778926] Freeing unused kernel memory: 1024K [ 1.781958] Run /sbin/init as init process [ 1.821798] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.952110] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 1.957408] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.960843] hub 1-1.1:1.0: USB hub found [ 1.963679] hub 1-1.1:1.0: 3 ports detected [ 2.266960] systemd[1]: System time before build time, advancing clock. [ 2.281814] usb 1-1.1.3: new full-speed USB device number 4 using dwc_otg [ 2.400446] NET: Registered protocol family 10 [ 2.404350] Segment Routing with IPv6 [ 2.416197] usb 1-1.1.3: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 2.421451] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.427039] usb 1-1.1.3: Product: ConBee II [ 2.429883] usb 1-1.1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 2.432812] usb 1-1.1.3: SerialNumber: DE2131494 [ 2.446092] random: systemd: uninitialized urandom read (16 bytes read) [ 2.451537] random: systemd: uninitialized urandom read (16 bytes read) [ 2.460433] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.469655] systemd[1]: Detected architecture arm. [ 2.501955] systemd[1]: Set hostname to <raspberrypi>. [ 2.560620] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 2.731866] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg [ 2.872315] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 2.877839] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.062607] systemd[1]: Configuration file /lib/systemd/system/iobroker.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.087494] systemd[1]: [/lib/systemd/system/deconz.service:9] Unknown lvalue 'StartLimitIntervalSec' in section 'Service' [ 3.118271] systemd[1]: Listening on udev Control Socket. [ 3.126399] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.136493] systemd[1]: Reached target Swap. [ 3.143581] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.148029] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 3.149042] libphy: lan78xx-mdiobus: probed [ 3.173246] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64 [ 3.174491] systemd[1]: Created slice User and Session Slice. [ 3.795384] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.900472] systemd-journald[112]: Received request to flush runtime journal from PID 1 [ 4.257689] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 4.264654] media: Linux media interface: v0.10 [ 4.264800] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 4.264811] [vc_sm_connected_init]: start [ 4.268883] [vc_sm_connected_init]: installed successfully [ 4.308084] videodev: Linux video capture interface: v2.00 [ 4.346399] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.347686] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.380986] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.394378] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.403277] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.403289] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.417596] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.417608] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.426729] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.426745] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.496195] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.518558] bcm2835_audio soc:audio: card created with 8 channels [ 4.643126] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.710106] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.815538] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.831604] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.832482] usbcore: registered new interface driver brcmfmac [ 4.871038] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.075061] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 5.114288] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 5.128613] cdc_acm 1-1.1.3:1.0: ttyACM0: USB ACM device [ 5.132672] usbcore: registered new interface driver cdc_acm [ 5.132684] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5.160661] random: crng init done [ 5.160674] random: 7 urandom warning(s) missed due to ratelimiting [ 5.402367] usb 1-1.1.3: USB disconnect, device number 4 [ 5.701893] usb 1-1.1.3: new full-speed USB device number 6 using dwc_otg [ 5.837346] usb 1-1.1.3: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [ 5.837363] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.837373] usb 1-1.1.3: Product: ConBee II [ 5.837383] usb 1-1.1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 5.837395] usb 1-1.1.3: SerialNumber: DE2131494 [ 5.840840] cdc_acm 1-1.1.3:1.0: ttyACM0: USB ACM device [ 5.909395] uart-pl011 3f201000.serial: no DMA platform data [ 6.398755] Bluetooth: Core ver 2.22 [ 6.398842] NET: Registered protocol family 31 [ 6.398849] Bluetooth: HCI device and connection manager initialized [ 6.398871] Bluetooth: HCI socket layer initialized [ 6.398885] Bluetooth: L2CAP socket layer initialized [ 6.398925] Bluetooth: SCO socket layer initialized [ 6.570960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.570973] brcmfmac: power management disabled [ 6.757773] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 6.867378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.871389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.792074] Bluetooth: HCI UART driver ver 2.3 [ 12.792090] Bluetooth: HCI UART protocol H4 registered [ 12.792176] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.792388] Bluetooth: HCI UART protocol Broadcom registered [ 12.967508] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.967519] Bluetooth: BNEP filters: protocol multicast [ 12.967537] Bluetooth: BNEP socket layer initialized [ 13.056205] Bluetooth: RFCOMM TTY layer initialized [ 13.056224] Bluetooth: RFCOMM socket layer initialized [ 13.056249] Bluetooth: RFCOMM ver 1.11 [ 155.399747] Bluetooth: hci0: advertising data len corrected [ 157.591922] Bluetooth: hci0: advertising data len corrected [ 161.938815] Bluetooth: hci0: advertising data len corrected [ 164.127317] Bluetooth: hci0: advertising data len corrected [ 165.240048] Bluetooth: hci0: advertising data len corrected [ 167.463176] Bluetooth: hci0: advertising data len corrected [ 168.589343] Bluetooth: hci0: advertising data len corrected [ 170.792242] Bluetooth: hci0: advertising data len corrected [ 173.048533] Bluetooth: hci0: advertising data len corrected [ 174.152368] Bluetooth: hci0: advertising data len corrected [ 176.313530] Bluetooth: hci0: advertising data len corrected [ 177.424222] Bluetooth: hci0: advertising data len corrected [ 187.324091] Bluetooth: hci0: advertising data len corrected [ 188.439199] Bluetooth: hci0: advertising data len corrected [ 192.875021] Bluetooth: hci0: advertising data len corrected [ 193.978813] Bluetooth: hci0: advertising data len corrected [ 195.092925] Bluetooth: hci0: advertising data len corrected [ 196.204439] Bluetooth: hci0: advertising data len corrected [ 197.313987] Bluetooth: hci0: advertising data len corrected [ 199.498756] Bluetooth: hci0: advertising data len corrected [ 203.892146] Bluetooth: hci0: advertising data len corrected [ 204.958260] Bluetooth: hci0: advertising data len corrected [ 208.300408] Bluetooth: hci0: advertising data len corrected [ 211.564607] Bluetooth: hci0: advertising data len corrected [ 212.681586] Bluetooth: hci0: advertising data len corrected [ 213.780242] Bluetooth: hci0: advertising data len corrected [ 214.929276] Bluetooth: hci0: advertising data len corrected [ 216.025278] Bluetooth: hci0: advertising data len corrected [ 218.225119] Bluetooth: hci0: advertising data len corrected [ 219.331616] Bluetooth: hci0: advertising data len corrected [ 220.410490] Bluetooth: hci0: advertising data len corrected [ 221.502850] Bluetooth: hci0: advertising data len corrected [ 222.629042] Bluetooth: hci0: advertising data len corrected [ 226.996777] Bluetooth: hci0: advertising data len corrected [ 228.097156] Bluetooth: hci0: advertising data len corrected [ 230.339541] Bluetooth: hci0: advertising data len corrected [ 233.576331] Bluetooth: hci0: advertising data len corrected [ 234.703214] Bluetooth: hci0: advertising data len corrected [ 235.792352] Bluetooth: hci0: advertising data len corrected [ 236.882599] Bluetooth: hci0: advertising data len corrected [ 237.945210] Bluetooth: hci0: advertising data len corrected [ 239.051179] Bluetooth: hci0: advertising data len corrected [ 241.277080] Bluetooth: hci0: advertising data len corrected [ 243.482821] Bluetooth: hci0: advertising data len corrected [ 244.566940] Bluetooth: hci0: advertising data len corrected [ 250.043728] Bluetooth: hci0: advertising data len corrected [ 253.357930] Bluetooth: hci0: advertising data len corrected [ 255.572364] Bluetooth: hci0: advertising data len corrected [ 256.661481] Bluetooth: hci0: advertising data len corrected [ 262.193539] Bluetooth: hci0: advertising data len corrected [ 264.393498] Bluetooth: hci0: advertising data len corrected [ 265.494968] Bluetooth: hci0: advertising data len corrected [ 266.607307] Bluetooth: hci0: advertising data len corrected [ 267.681629] Bluetooth: hci0: advertising data len corrected [ 268.817469] Bluetooth: hci0: advertising data len corrected [ 269.943339] Bluetooth: hci0: advertising data len corrected [ 272.175482] Bluetooth: hci0: advertising data len corrected [ 273.297524] Bluetooth: hci0: advertising data len corrected [ 274.369227] Bluetooth: hci0: advertising data len corrected [ 275.466374] Bluetooth: hci0: advertising data len corrected -
@SaschaS
Dein System speichert keine Daten. Die 29 Paket-Upgrade sind ja auch wieder weg.
Vielleicht hat die SD-Karte auch einen Schuß... -
@Thomas-Braun Dann ists ja noch schlimmer, ich bleib hier mal bei euch dran.
