GYP Fehler bei Erstinstallation und Adaptern (iot, alexa...)
-
@varg Du kannst im Moment sehr gut mit 10 leben.
Ein node12 kannst du nachher immer noch draufwerfen. Aber sauber und nicht mit so Harakiri-Aktionen wie oben zu sehen. -
@Thomas-Braun also ohne auch nur irgendwas vorab zu installieren (ausser update upgrade) kommt nun nach Ausführung des scripts:
Kannst du bitte noch kurz überfliegen ob das so ok ist ? Danke
pi@raspberrypi:~ $ curl -sL https://iobroker.net/install.sh | bash - library: loaded Library version=2020-04-12 ========================================================================== Welcome to the ioBroker installer! Installer version: 2020-04-12 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease Paketlisten werden gelesen... Fertig ========================================================================== Node.js not found. Installing... ========================================================================== ## Installing the NodeSource Node.js 10.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Paketlisten werden gelesen... Fertig ## Confirming "buster" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_10.x/dists/buster/Release' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add - OK ## Creating apt sources list file for the NodeSource Node.js 10.x repo... + echo 'deb https://deb.nodesource.com/node_10.x buster main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src https://deb.nodesource.com/node_10.x buster main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease Holen:3 https://deb.nodesource.com/node_10.x buster InRelease [4.584 B] Holen:4 https://deb.nodesource.com/node_10.x buster/main armhf Packages [765 B] Es wurden 5.349 B in 1 s geholt (4.385 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 10.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add - echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Installed acl Installed gcc-c++ Installed libavahi-compat-libdnssd-dev Installed libudev-dev Installed libpam0g-dev Installed git Installed python-dev ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../src/main.cpp:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/main.cpp:3: ../src/main.cpp: At global scope: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/main.cpp:3: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/unix_dgram.cc:5: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: ../src/unix_dgram.cc: At global scope: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/pi/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../../nan/nan.h:56, from ../src/poller.cpp:1: /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/pi/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.178.86:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! pi@raspberrypi:~ $ -
@Thomas-Braun
Würde sagen, das passt. Wenn Du die Adresse im Browser aufrufst, solltest Du iobroker sehen. Kannst auch einmal rebooten, dann siehst Du auch gleich, ob der Autostart passt.Gruss, Jürgen
-
@varg Die Meldungen sollten zwar eigentlich nicht erscheinen, der Server sollte aber trotzdem funktionieren. Da sind bestimmt noch irgendwelche Reste von deinen ersten Versuchen stehen geblieben.
Kann aber sein, dass es bei Bluetooth klemmt.
-
@Thomas-Braun habe die sd karte natürlich neu formatiert (dateisystem komplett gelöscht etc) und mit etcher neu bespielt
folgendes erscheint bei der installation von iot
$ ./iobroker url "https://github.com/ioBroker/ioBroker.iot/tarball/master" iot install https://github.com/ioBroker/ioBroker.iot/tarball/master NPM version: 6.14.4 npm install https://github.com/ioBroker/ioBroker.iot/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) Package pixman-1 was not found in the pkg-config search path.Perhaps you should add the directory containing `pixman-1.pc'to the PKG_CONFIG_PATH environment variableNo package 'pixman-1' found gyp: Call to 'pkg-config pixman-1 --libs' returned exit status 1 while in binding.gyp. while trying to load binding.gyp gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:351:16)gyp ERR! stack at ChildProcess.emit (events.js:198:13)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.19.97-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=6" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /opt/iobroker/node_modules/canvasgyp ERR! node -v v10.20.1gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok node-pre-gyp ERR! build error node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/opt/iobroker/node_modules/node-pre-gyp/lib/util/compile.js:83:29)node-pre-gyp ERR! stack at ChildProcess.emit (events.js:198:13)node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:982:16)node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) node-pre-gyp ERR! System Linux 4.19.97-v7l+node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvasnode-pre-gyp ERR! node -v v10.20.1node-pre-gyp ERR! node-pre-gyp -v v0.11.0node-pre-gyp ERR! not ok info sharp Downloading https://github.com/lovell/sharp-libvips/releases/download/v8.9.1/libvips-8.9.1-linux-armv7.tar.gz upload [20] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.28893cca.js.map static/js/runtime-main.28893cca.js.map application/json upload [19] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/runtime-main.28893cca.js static/js/runtime-main.28893cca.js application/javascript upload [18] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.c340c4c7.chunk.js.map static/js/main.c340c4c7.chunk.js.map application/json upload [17] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/main.c340c4c7.chunk.js static/js/main.c340c4c7.chunk.js application/javascript upload [16] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.626a410c.chunk.js.map static/js/2.626a410c.chunk.js.map application/json upload [15] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.626a410c.chunk.js.LICENSE.txt static/js/2.626a410c.chunk.js.LICENSE.txt text/plain upload [14] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/js/2.626a410c.chunk.js static/js/2.626a410c.chunk.js application/javascript upload [13] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css.map static/css/main.d4bed9c6.chunk.css.map application/json upload [12] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/main.d4bed9c6.chunk.css static/css/main.d4bed9c6.chunk.css text/css upload [11] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.b1b16afe.chunk.css.map static/css/2.b1b16afe.chunk.css.map application/json upload [10] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/static/css/2.b1b16afe.chunk.css static/css/2.b1b16afe.chunk.css text/css upload [9] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/service-worker.js service-worker.js application/javascript upload [8] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/precache-manifest.96f83d294bf21dcc4d54812ef69a948f.js precache-manifest.96f83d294bf21dcc4d54812ef69a948f.js application/javascript upload [7] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/manifest.json manifest.json application/json upload [6] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/iot.png iot.png image/png upload [5] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/index_m.html index_m.html text/html upload [4] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [3] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/blockly.js blockly.js application/javascript upload [2] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/asset-manifest.json asset-manifest.json application/json upload [1] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/alexalogo.png alexalogo.png image/png upload [0] iot.admin /opt/iobroker/node_modules/iobroker.iot/admin/actions.js actions.js application/javascript process exited with code 0 -
@varg Ja. Alles prima.
-
@Thomas-Braun ok thx versuche dann mal diese "fehlermeldungen" zu ignorieren
-
@varg Wenn der Adapter läuft...
Wenn du magst kannst du aber canvas mal neubauen (Oder es versuchen).
iobroker stop cd /opt/iobroker npm rebuild canvas --build-from-sourceDie Meldungen muss ich sehen, wenn da was als fehlend reklamiert wird.
Bitte inkl. login-Prompt. -
@Thomas-Braun kommt gar keine meldung
-
@Thomas-Braun dennoch bei jedem update oder installation eines adapters diese gyp-err meldungen
$ ./iobroker upgrade info Update info from @1.5.6 to @1.7.2 NPM version: 6.14.4 npm install iobroker.info@1.7.2 --loglevel error --prefix "/opt/iobroker" (System call) Package pixman-1 was not found in the pkg-config search path.Perhaps you should add the directory containing `pixman-1.pc'to the PKG_CONFIG_PATH environment variableNo package 'pixman-1' foundgyp: Call to 'pkg-config pixman-1 --libs' returned exit status 1 while in binding.gyp. while trying to load binding.gyp gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:351:16)gyp ERR! stack at ChildProcess.emit (events.js:198:13)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)gyp ERR! System Linux 4.19.97-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=6" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"gyp ERR! cwd /opt/iobroker/node_modules/canvasgyp ERR! node -v v10.20.1gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok node-pre-gyp ERR! build error node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/opt/iobroker/node_modules/node-pre-gyp/lib/util/compile.js:83:29)node-pre-gyp ERR! stack at ChildProcess.emit (events.js:198:13)node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:982:16)node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) node-pre-gyp ERR! System Linux 4.19.97-v7l+node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvasnode-pre-gyp ERR! node -v v10.20.1node-pre-gyp ERR! node-pre-gyp -v v0.11.0 node-pre-gyp ERR! not ok upload [80] info.admin /opt/iobroker/node_modules/iobroker.info/admin/words.js words.js application/javascript Update "system.adapter.info.0" upload [70] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/hostInfo.js lib/js/hostInfo.js application/javascript upload [60] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/js/bootstrap.min.js lib/js/bootstrap.min.js application/javascript upload [50] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/slackware.png lib/img/logos/slackware.png image/png upload [40] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/manjaro.png lib/img/logos/manjaro.png image/png upload [30] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/logos/coreos.png lib/img/logos/coreos.png image/png upload [20] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/icons/disk.png lib/img/icons/disk.png image/png upload [19] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/icons/cpu.png lib/img/icons/cpu.png image/png upload [18] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/icons/battery.png lib/img/icons/battery.png image/png upload [17] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/sechand.png lib/img/clock/sechand.png image/png upload [16] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/minhand.png lib/img/clock/minhand.png image/png upload [15] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/hourhand.png lib/img/clock/hourhand.png image/png upload [14] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/img/clock/clockface.png lib/img/clock/clockface.png image/png upload [13] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.woff2 lib/fonts/fontawesome-webfont.woff2 font/woff2 upload [12] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.woff lib/fonts/fontawesome-webfont.woff font/woff upload [11] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.ttf lib/fonts/fontawesome-webfont.ttf font/ttf upload [10] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.svg lib/fonts/fontawesome-webfont.svg image/svg+xml upload [9] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/fontawesome-webfont.eot lib/fonts/fontawesome-webfont.eot application/vnd.ms-fontobject upload [8] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/fonts/FontAwesome.otf lib/fonts/FontAwesome.otf font/otf upload [7] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/data/infoData.json lib/data/infoData.json application/json upload [6] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/simplemde.min.css lib/css/simplemde.min.css text/css upload [5] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/info.css lib/css/info.css text/css upload [4] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/font-awesome.min.css lib/css/font-awesome.min.css text/css upload [3] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/chartist.min.css lib/css/chartist.min.css text/css upload [2] info.admin /opt/iobroker/node_modules/iobroker.info/admin/lib/css/bootstrap.min.css lib/css/bootstrap.min.css text/css upload [1] info.admin /opt/iobroker/node_modules/iobroker.info/admin/info.png info.png image/png upload [0] info.admin /opt/iobroker/node_modules/iobroker.info/admin/index_m.html index_m.html text/html Adapter "info" updated process exited with code 0 -
@varg sagte in GYP Fehler bei Erstinstallation und Adaptern (iot, alexa...):
@Thomas-Braun kommt gar keine meldung
Zeig mir deine Kommandozeile inkl. prompt.
-
login as: pi pi@192.168.178.86's password: Linux raspberrypi 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sat May 9 16:13:57 2020 from 192.168.178.2 pi@raspberrypi:~ $ iobroker stop pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm rebuild canvas --build-from-source pi@raspberrypi:/opt/iobroker $ -
@varg Dann versuch mal
npm i canvas -
@Thomas-Braun said in GYP Fehler bei Erstinstallation und Adaptern (iot, alexa...):
npm i canvas
login as: pi pi@192.168.178.86's password: Linux raspberrypi 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sat May 9 16:13:57 2020 from 192.168.178.2 pi@raspberrypi:~ $ iobroker stop pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm rebuild canvas --build-from-source pi@raspberrypi:/opt/iobroker $ ^C pi@raspberrypi:/opt/iobroker $ iobroker start pi@raspberrypi:/opt/iobroker $ iobroker stop pi@raspberrypi:/opt/iobroker $ npm i canvas > canvas@2.6.1 install /opt/iobroker/node_modules/canvas > node-pre-gyp install --fallback-to-build node-pre-gyp WARN Using request for node-pre-gyp https download node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.1/canvas-v2.6.1-node-v64-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for canvas@2.6.1 and node@10.20.1 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) Package pixman-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `pixman-1.pc' to the PKG_CONFIG_PATH environment variable No package 'pixman-1' found gyp: Call to 'pkg-config pixman-1 --libs' returned exit status 1 while in binding.gyp. while trying to load binding.gyp gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1 gyp ERR! stack at ChildProcess.onCpExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:351:16) gyp ERR! stack at ChildProcess.emit (events.js:198:13) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12) gyp ERR! System Linux 4.19.97-v7l+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=6" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64" gyp ERR! cwd /opt/iobroker/node_modules/canvas gyp ERR! node -v v10.20.1 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok node-pre-gyp ERR! build error node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1) node-pre-gyp ERR! stack at ChildProcess.<anonymous> (/opt/iobroker/node_modules/node-pre-gyp/lib/util/compile.js:83:29) node-pre-gyp ERR! stack at ChildProcess.emit (events.js:198:13) node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:982:16) node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5) node-pre-gyp ERR! System Linux 4.19.97-v7l+ node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build" node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas node-pre-gyp ERR! node -v v10.20.1 node-pre-gyp ERR! node-pre-gyp -v v0.11.0 node-pre-gyp ERR! not ok Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=6 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.5 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.5: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! canvas@2.6.1 install: `node-pre-gyp install --fallback-to-build` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the canvas@2.6.1 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-05-09T14_23_58_932Z-debug.log pi@raspberrypi:/opt/iobroker $ -
@varg sagte in GYP Fehler bei Erstinstallation und Adaptern (iot, alexa...):
pixman-1
sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0Und dann nochmal
npm i canvas -
pi@raspberrypi:/opt/iobroker $ ^C pi@raspberrypi:/opt/iobroker $ iobroker start pi@raspberrypi:/opt/iobroker $ iobroker stop pi@raspberrypi:/opt/iobroker $ cd / pi@raspberrypi:/ $ sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev libpixman-1-0 Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig build-essential ist schon die neueste Version (12.6). Die folgenden zusätzlichen Pakete werden installiert: fontconfig fontconfig-config fonts-dejavu-core gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-glib-2.0 gir1.2-harfbuzz-0.0 gir1.2-pango-1.0 gir1.2-rsvg-2.0 icu-devtools libblkid-dev libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcroco3 libdatrie1 libffi-dev libfontconfig1 libfontconfig1-dev libfribidi-dev libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgdk-pixbuf2.0-dev libgif7 libgirepository-1.0-1 libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libgraphite2-3 libgraphite2-dev libharfbuzz-dev libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0b libice-dev libice6 libicu-dev libjbig0 libjpeg62-turbo-dev liblzo2-2 libmount-dev libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-dev libpthread-stubs0-dev librsvg2-2 librsvg2-common libselinux1-dev libsepol1-dev libsm-dev libsm6 libthai-data libthai0 libtiff5 libwebp6 libx11-dev libxau-dev libxcb-render0 libxcb-render0-dev libxcb-shm0 libxcb-shm0-dev libxcb1-dev libxdmcp-dev libxext-dev libxft-dev libxft2 libxrender-dev libxrender1 pango1.0-tools python3-distutils python3-lib2to3 uuid-dev x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev Vorgeschlagene Pakete: libcairo2-doc libglib2.0-doc libxml2-utils libgraphite2-utils libice-doc icu-doc imagemagick libpango1.0-doc librsvg2-bin librsvg2-doc libsm-doc libx11-doc libxcb-doc libxext-doc Die folgenden NEUEN Pakete werden installiert: fontconfig fontconfig-config fonts-dejavu-core gir1.2-freedesktop gir1.2-gdkpixbuf-2.0 gir1.2-glib-2.0 gir1.2-harfbuzz-0.0 gir1.2-pango-1.0 gir1.2-rsvg-2.0 icu-devtools libblkid-dev libcairo-gobject2 libcairo-script-interpreter2 libcairo2 libcairo2-dev libcroco3 libdatrie1 libffi-dev libfontconfig1 libfontconfig1-dev libfribidi-dev libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common libgdk-pixbuf2.0-dev libgif-dev libgif7 libgirepository-1.0-1 libglib2.0-bin libglib2.0-dev libglib2.0-dev-bin libgraphite2-3 libgraphite2-dev libharfbuzz-dev libharfbuzz-gobject0 libharfbuzz-icu0 libharfbuzz0b libice-dev libice6 libicu-dev libjbig0 libjpeg-dev libjpeg62-turbo-dev liblzo2-2 libmount-dev libpango-1.0-0 libpango1.0-dev libpangocairo-1.0-0 libpangoft2-1.0-0 libpangoxft-1.0-0 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpixman-1-0 libpixman-1-dev libpthread-stubs0-dev librsvg2-2 librsvg2-common librsvg2-dev libselinux1-dev libsepol1-dev libsm-dev libsm6 libthai-data libthai0 libtiff5 libwebp6 libx11-dev libxau-dev libxcb-render0 libxcb-render0-dev libxcb-shm0 libxcb-shm0-dev libxcb1-dev libxdmcp-dev libxext-dev libxft-dev libxft2 libxrender-dev libxrender1 pango1.0-tools python3-distutils python3-lib2to3 uuid-dev x11-common x11proto-core-dev x11proto-dev x11proto-xext-dev xorg-sgml-doctools xtrans-dev 0 aktualisiert, 91 neu installiert, 0 zu entfernen und 4 nicht aktualisiert. Es müssen 30,0 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 98,7 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] J Holen:1 http://archive.raspberrypi.org/debian buster/main armhf libpixman-1-0 armhf 0.36.0-1+rpt1 [476 kB] Holen:3 http://archive.raspberrypi.org/debian buster/main armhf libcairo2 armhf 1.16.0-4+rpt1 [600 kB] Holen:4 http://archive.raspberrypi.org/debian buster/main armhf libcairo-gobject2 armhf 1.16.0-4+rpt1 [123 kB] Holen:6 http://archive.raspberrypi.org/debian buster/main armhf libcairo-script-interpreter2 armhf 1.16.0-4+rpt1 [150 kB] Holen:2 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf fonts-dejavu-core all 2.37-1 [1.068 kB] Holen:7 http://archive.raspberrypi.org/debian buster/main armhf libpixman-1-dev armhf 0.36.0-1+rpt1 [498 kB] Holen:8 http://archive.raspberrypi.org/debian buster/main armhf libcairo2-dev armhf 1.16.0-4+rpt1 [618 kB] Holen:5 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf fontconfig-config all 2.13.1-2 [280 kB] Holen:9 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libfontconfig1 armhf 2.13.1-2 [327 kB] Holen:10 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf fontconfig armhf 2.13.1-2 [404 kB] Holen:11 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libgirepository-1.0-1 armhf 1.58.3-2 [78,8 kB] Holen:12 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf gir1.2-glib-2.0 armhf 1.58.3-2 [143 kB] Holen:13 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxcb-render0 armhf 1.13.1-2 [108 kB] Holen:14 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxcb-shm0 armhf 1.13.1-2 [99,3 kB] Holen:15 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxrender1 armhf 1:0.9.10-1 [29,9 kB] Holen:17 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libjbig0 armhf 2.1-3.1+b2 [27,6 kB] Holen:18 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libwebp6 armhf 0.6.1-2 [228 kB] Holen:19 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libtiff5 armhf 4.1.0+git191117-2~deb10u1 [249 kB] Holen:20 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libgdk-pixbuf2.0-common all 2.38.1+dfsg-1 [316 kB] Holen:21 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libgdk-pixbuf2.0-0 armhf 2.38.1+dfsg-1 [157 kB] Holen:22 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf gir1.2-gdkpixbuf-2.0 armhf 2.38.1+dfsg-1 [18,3 kB] Holen:23 http://ftp.gwdg.de/pub/linux/debian/raspbian/raspbian buster/main armhf libgraphite2-3 armhf 1.3.13-7 [69,6 kB] Holen:24 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libharfbuzz0b armhf 2.3.1-1 [1.144 kB] Holen:25 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libharfbuzz-gobject0 armhf 2.3.1-1 [845 kB] Holen:27 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libthai-data all 0.1.28-2 [170 kB] Holen:26 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf gir1.2-harfbuzz-0.0 armhf 2.3.1-1 [853 kB] Holen:28 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libdatrie1 armhf 0.2.12-2 [35,9 kB] Holen:29 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libthai0 armhf 0.1.28-2 [50,9 kB] Holen:30 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libpango-1.0-0 armhf 1.42.4-7~deb10u1 [168 kB] Holen:34 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libpangoxft-1.0-0 armhf 1.42.4-7~deb10u1 [47,3 kB] Holen:35 http://ftp.gwdg.de/pub/linux/debian/raspbian/raspbian buster/main armhf gir1.2-pango-1.0 armhf 1.42.4-7~deb10u1 [55,5 kB] Holen:16 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf gir1.2-freedesktop armhf 1.58.3-2 [20,3 kB] Holen:31 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libpangoft2-1.0-0 armhf 1.42.4-7~deb10u1 [62,0 kB] Holen:32 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libpangocairo-1.0-0 armhf 1.42.4-7~deb10u1 [51,7 kB] Holen:33 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libxft2 armhf 2.3.2-2 [49,3 kB] Holen:36 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libcroco3 armhf 0.6.12-3 [132 kB] Holen:37 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf librsvg2-2 armhf 2.44.10-2.1+rpi1 [967 kB] Holen:39 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf icu-devtools armhf 63.1-6+deb10u1 [163 kB] Holen:38 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf gir1.2-rsvg-2.0 armhf 2.44.10-2.1+rpi1 [22,0 kB] Holen:40 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf uuid-dev armhf 2.33.1-0.1 [92,4 kB] Holen:41 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libblkid-dev armhf 2.33.1-0.1 [210 kB] Holen:42 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf liblzo2-2 armhf 2.10-0.1 [48,4 kB] Holen:43 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libfontconfig1-dev armhf 2.13.1-2 [943 kB] Holen:44 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf xorg-sgml-doctools all 1:1.11-1 [21,9 kB] Holen:45 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf x11proto-dev all 2018.4-4 [251 kB] Holen:46 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf x11proto-core-dev all 2018.4-4 [3.128 B] Holen:47 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxau-dev armhf 1:1.0.8-1+b2 [22,4 kB] Holen:48 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libxdmcp-dev armhf 1:1.1.2-3 [40,9 kB] Holen:49 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf xtrans-dev all 1.3.5-1 [100 kB] Holen:50 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libpthread-stubs0-dev armhf 0.4-1 [5.344 B] Holen:52 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libx11-dev armhf 2:1.6.7-1 [760 kB] Holen:53 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxrender-dev armhf 1:0.9.10-1 [37,7 kB] Holen:54 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf x11proto-xext-dev all 2018.4-4 [3.128 B] Holen:55 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libxext-dev armhf 2:1.3.3-1+b2 [102 kB] Holen:51 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libxcb1-dev armhf 1.13.1-2 [169 kB] Holen:56 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf x11-common all 1:7.7+19 [251 kB] Holen:57 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libice6 armhf 2:1.0.9-2 [51,6 kB] Holen:58 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libsm6 armhf 2:1.2.3-1 [32,9 kB] Holen:59 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libice-dev armhf 2:1.0.9-2 [58,8 kB] Holen:60 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libsm-dev armhf 2:1.2.3-1 [35,4 kB] Holen:61 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libxcb-render0-dev armhf 1.13.1-2 [111 kB] Holen:62 http://ftp.gwdg.de/pub/linux/debian/raspbian/raspbian buster/main armhf libxcb-shm0-dev armhf 1.13.1-2 [100 kB] Holen:63 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libffi-dev armhf 3.2.1-9 [159 kB] Holen:64 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libglib2.0-bin armhf 2.58.3-2+deb10u2 [117 kB] Holen:65 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf python3-lib2to3 all 3.7.3-1 [76,7 kB] Holen:66 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf python3-distutils all 3.7.3-1 [142 kB] Holen:67 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libglib2.0-dev-bin armhf 2.58.3-2+deb10u2 [155 kB] Holen:68 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libmount-dev armhf 2.33.1-0.1 [209 kB] Holen:70 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libpcre32-3 armhf 2:8.39-12 [227 kB] Holen:69 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libpcre16-3 armhf 2:8.39-12 [234 kB] Holen:72 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libpcre3-dev armhf 2:8.39-12 [564 kB] Holen:71 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libpcrecpp0v5 armhf 2:8.39-12 [150 kB] Holen:74 http://mirror.netcologne.de/raspbian/raspbian buster/main armhf libselinux1-dev armhf 2.8-1+b1 [156 kB] Holen:75 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libglib2.0-dev armhf 2.58.3-2+deb10u2 [1.372 kB] Holen:77 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libgdk-pixbuf2.0-bin armhf 2.38.1+dfsg-1 [23,0 kB] Holen:78 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libgdk-pixbuf2.0-dev armhf 2.38.1+dfsg-1 [49,5 kB] Holen:79 http://ftp.gwdg.de/pub/linux/debian/raspbian/raspbian buster/main armhf libgif7 armhf 5.1.4-3 [41,0 kB] Holen:81 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libgraphite2-dev armhf 1.3.13-7 [23,1 kB] Holen:84 http://ftp.agdsn.de/pub/mirrors/raspbian/raspbian buster/main armhf libharfbuzz-dev armhf 2.3.1-1 [1.244 kB] Holen:73 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libsepol1-dev armhf 2.8-1 [309 kB] Holen:76 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libfribidi-dev armhf 1.0.5-3.1+deb10u1 [99,3 kB] Holen:80 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libgif-dev armhf 5.1.4-3 [43,4 kB] Holen:82 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libharfbuzz-icu0 armhf 2.3.1-1 [833 kB] Holen:83 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libicu-dev armhf 63.1-6+deb10u1 [8.841 kB] Holen:87 http://mirror1.hs-esslingen.de/pub/Mirrors/archive.raspbian.org/raspbian buster/main armhf libxft-dev armhf 2.3.2-2 [60,3 kB] Holen:89 http://mirror.de.leaseweb.net/raspbian/raspbian buster/main armhf libpango1.0-dev armhf 1.42.4-7~deb10u1 [139 kB] Holen:91 http://ftp.gwdg.de/pub/linux/debian/raspbian/raspbian buster/main armhf librsvg2-dev armhf 2.44.10-2.1+rpi1 [42,1 kB] Holen:85 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libjpeg62-turbo-dev armhf 1:1.5.2-2+b1 [179 kB] Holen:86 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf libjpeg-dev all 1:1.5.2-2 [57,5 kB] Holen:88 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf pango1.0-tools armhf 1.42.4-7~deb10u1 [53,2 kB] Holen:90 http://ftp.halifax.rwth-aachen.de/raspbian/raspbian buster/main armhf librsvg2-common armhf 2.44.10-2.1+rpi1 [23,1 kB] Es wurden 30,0 MB in 15 s geholt (1.952 kB/s). Extrahiere Vorlagen aus Paketen: 100% Vorkonfiguration der Pakete ... Vormals nicht ausgewähltes Paket fonts-dejavu-core wird gewählt. (Lese Datenbank ... 46042 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../00-fonts-dejavu-core_2.37-1_all.deb ... Entpacken von fonts-dejavu-core (2.37-1) ... Vormals nicht ausgewähltes Paket fontconfig-config wird gewählt. Vorbereitung zum Entpacken von .../01-fontconfig-config_2.13.1-2_all.deb ... Entpacken von fontconfig-config (2.13.1-2) ... Vormals nicht ausgewähltes Paket libfontconfig1:armhf wird gewählt. Vorbereitung zum Entpacken von .../02-libfontconfig1_2.13.1-2_armhf.deb ... Entpacken von libfontconfig1:armhf (2.13.1-2) ... Vormals nicht ausgewähltes Paket fontconfig wird gewählt. Vorbereitung zum Entpacken von .../03-fontconfig_2.13.1-2_armhf.deb ... Entpacken von fontconfig (2.13.1-2) ... Vormals nicht ausgewähltes Paket libgirepository-1.0-1:armhf wird gewählt. Vorbereitung zum Entpacken von .../04-libgirepository-1.0-1_1.58.3-2_armhf.deb ... Entpacken von libgirepository-1.0-1:armhf (1.58.3-2) ... Vormals nicht ausgewähltes Paket gir1.2-glib-2.0:armhf wird gewählt. Vorbereitung zum Entpacken von .../05-gir1.2-glib-2.0_1.58.3-2_armhf.deb ... Entpacken von gir1.2-glib-2.0:armhf (1.58.3-2) ... Vormals nicht ausgewähltes Paket libpixman-1-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../06-libpixman-1-0_0.36.0-1+rpt1_armhf.deb ... Entpacken von libpixman-1-0:armhf (0.36.0-1+rpt1) ... Vormals nicht ausgewähltes Paket libxcb-render0:armhf wird gewählt. Vorbereitung zum Entpacken von .../07-libxcb-render0_1.13.1-2_armhf.deb ... Entpacken von libxcb-render0:armhf (1.13.1-2) ... Vormals nicht ausgewähltes Paket libxcb-shm0:armhf wird gewählt. Vorbereitung zum Entpacken von .../08-libxcb-shm0_1.13.1-2_armhf.deb ... Entpacken von libxcb-shm0:armhf (1.13.1-2) ... Vormals nicht ausgewähltes Paket libxrender1:armhf wird gewählt. Vorbereitung zum Entpacken von .../09-libxrender1_1%3a0.9.10-1_armhf.deb ... Entpacken von libxrender1:armhf (1:0.9.10-1) ... Vormals nicht ausgewähltes Paket libcairo2:armhf wird gewählt. Vorbereitung zum Entpacken von .../10-libcairo2_1.16.0-4+rpt1_armhf.deb ... Entpacken von libcairo2:armhf (1.16.0-4+rpt1) ... Vormals nicht ausgewähltes Paket libcairo-gobject2:armhf wird gewählt. Vorbereitung zum Entpacken von .../11-libcairo-gobject2_1.16.0-4+rpt1_armhf.deb ... Entpacken von libcairo-gobject2:armhf (1.16.0-4+rpt1) ... Vormals nicht ausgewähltes Paket gir1.2-freedesktop:armhf wird gewählt. Vorbereitung zum Entpacken von .../12-gir1.2-freedesktop_1.58.3-2_armhf.deb ... Entpacken von gir1.2-freedesktop:armhf (1.58.3-2) ... Vormals nicht ausgewähltes Paket libjbig0:armhf wird gewählt. Vorbereitung zum Entpacken von .../13-libjbig0_2.1-3.1+b2_armhf.deb ... Entpacken von libjbig0:armhf (2.1-3.1+b2) ... Vormals nicht ausgewähltes Paket libwebp6:armhf wird gewählt. Vorbereitung zum Entpacken von .../14-libwebp6_0.6.1-2_armhf.deb ... Entpacken von libwebp6:armhf (0.6.1-2) ... Vormals nicht ausgewähltes Paket libtiff5:armhf wird gewählt. Vorbereitung zum Entpacken von .../15-libtiff5_4.1.0+git191117-2~deb10u1_armhf.deb ... Entpacken von libtiff5:armhf (4.1.0+git191117-2~deb10u1) ... Vormals nicht ausgewähltes Paket libgdk-pixbuf2.0-common wird gewählt. Vorbereitung zum Entpacken von .../16-libgdk-pixbuf2.0-common_2.38.1+dfsg-1_all.deb ... Entpacken von libgdk-pixbuf2.0-common (2.38.1+dfsg-1) ... Vormals nicht ausgewähltes Paket libgdk-pixbuf2.0-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../17-libgdk-pixbuf2.0-0_2.38.1+dfsg-1_armhf.deb ... Entpacken von libgdk-pixbuf2.0-0:armhf (2.38.1+dfsg-1) ... Vormals nicht ausgewähltes Paket gir1.2-gdkpixbuf-2.0:armhf wird gewählt. Vorbereitung zum Entpacken von .../18-gir1.2-gdkpixbuf-2.0_2.38.1+dfsg-1_armhf.deb ... Entpacken von gir1.2-gdkpixbuf-2.0:armhf (2.38.1+dfsg-1) ... Vormals nicht ausgewähltes Paket libgraphite2-3:armhf wird gewählt. Vorbereitung zum Entpacken von .../19-libgraphite2-3_1.3.13-7_armhf.deb ... Entpacken von libgraphite2-3:armhf (1.3.13-7) ... Vormals nicht ausgewähltes Paket libharfbuzz0b:armhf wird gewählt. Vorbereitung zum Entpacken von .../20-libharfbuzz0b_2.3.1-1_armhf.deb ... Entpacken von libharfbuzz0b:armhf (2.3.1-1) ... Vormals nicht ausgewähltes Paket libharfbuzz-gobject0:armhf wird gewählt. Vorbereitung zum Entpacken von .../21-libharfbuzz-gobject0_2.3.1-1_armhf.deb ... Entpacken von libharfbuzz-gobject0:armhf (2.3.1-1) ... Vormals nicht ausgewähltes Paket gir1.2-harfbuzz-0.0:armhf wird gewählt. Vorbereitung zum Entpacken von .../22-gir1.2-harfbuzz-0.0_2.3.1-1_armhf.deb ... Entpacken von gir1.2-harfbuzz-0.0:armhf (2.3.1-1) ... Vormals nicht ausgewähltes Paket libthai-data wird gewählt. Vorbereitung zum Entpacken von .../23-libthai-data_0.1.28-2_all.deb ... Entpacken von libthai-data (0.1.28-2) ... Vormals nicht ausgewähltes Paket libdatrie1:armhf wird gewählt. Vorbereitung zum Entpacken von .../24-libdatrie1_0.2.12-2_armhf.deb ... Entpacken von libdatrie1:armhf (0.2.12-2) ... Vormals nicht ausgewähltes Paket libthai0:armhf wird gewählt. Vorbereitung zum Entpacken von .../25-libthai0_0.1.28-2_armhf.deb ... Entpacken von libthai0:armhf (0.1.28-2) ... Vormals nicht ausgewähltes Paket libpango-1.0-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../26-libpango-1.0-0_1.42.4-7~deb10u1_armhf.deb ... Entpacken von libpango-1.0-0:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket libpangoft2-1.0-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../27-libpangoft2-1.0-0_1.42.4-7~deb10u1_armhf.deb ... Entpacken von libpangoft2-1.0-0:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket libpangocairo-1.0-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../28-libpangocairo-1.0-0_1.42.4-7~deb10u1_armhf.deb ... Entpacken von libpangocairo-1.0-0:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket libxft2:armhf wird gewählt. Vorbereitung zum Entpacken von .../29-libxft2_2.3.2-2_armhf.deb ... Entpacken von libxft2:armhf (2.3.2-2) ... Vormals nicht ausgewähltes Paket libpangoxft-1.0-0:armhf wird gewählt. Vorbereitung zum Entpacken von .../30-libpangoxft-1.0-0_1.42.4-7~deb10u1_armhf.deb ... Entpacken von libpangoxft-1.0-0:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket gir1.2-pango-1.0:armhf wird gewählt. Vorbereitung zum Entpacken von .../31-gir1.2-pango-1.0_1.42.4-7~deb10u1_armhf.deb ... Entpacken von gir1.2-pango-1.0:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket libcroco3:armhf wird gewählt. Vorbereitung zum Entpacken von .../32-libcroco3_0.6.12-3_armhf.deb ... Entpacken von libcroco3:armhf (0.6.12-3) ... Vormals nicht ausgewähltes Paket librsvg2-2:armhf wird gewählt. Vorbereitung zum Entpacken von .../33-librsvg2-2_2.44.10-2.1+rpi1_armhf.deb ... Entpacken von librsvg2-2:armhf (2.44.10-2.1+rpi1) ... Vormals nicht ausgewähltes Paket gir1.2-rsvg-2.0:armhf wird gewählt. Vorbereitung zum Entpacken von .../34-gir1.2-rsvg-2.0_2.44.10-2.1+rpi1_armhf.deb ... Entpacken von gir1.2-rsvg-2.0:armhf (2.44.10-2.1+rpi1) ... Vormals nicht ausgewähltes Paket icu-devtools wird gewählt. Vorbereitung zum Entpacken von .../35-icu-devtools_63.1-6+deb10u1_armhf.deb ... Entpacken von icu-devtools (63.1-6+deb10u1) ... Vormals nicht ausgewähltes Paket uuid-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../36-uuid-dev_2.33.1-0.1_armhf.deb ... Entpacken von uuid-dev:armhf (2.33.1-0.1) ... Vormals nicht ausgewähltes Paket libblkid-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../37-libblkid-dev_2.33.1-0.1_armhf.deb ... Entpacken von libblkid-dev:armhf (2.33.1-0.1) ... Vormals nicht ausgewähltes Paket liblzo2-2:armhf wird gewählt. Vorbereitung zum Entpacken von .../38-liblzo2-2_2.10-0.1_armhf.deb ... Entpacken von liblzo2-2:armhf (2.10-0.1) ... Vormals nicht ausgewähltes Paket libcairo-script-interpreter2:armhf wird gewählt. Vorbereitung zum Entpacken von .../39-libcairo-script-interpreter2_1.16.0-4+rpt1_armhf.deb ... Entpacken von libcairo-script-interpreter2:armhf (1.16.0-4+rpt1) ... Vormals nicht ausgewähltes Paket libfontconfig1-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../40-libfontconfig1-dev_2.13.1-2_armhf.deb ... Entpacken von libfontconfig1-dev:armhf (2.13.1-2) ... Vormals nicht ausgewähltes Paket xorg-sgml-doctools wird gewählt. Vorbereitung zum Entpacken von .../41-xorg-sgml-doctools_1%3a1.11-1_all.deb ... Entpacken von xorg-sgml-doctools (1:1.11-1) ... Vormals nicht ausgewähltes Paket x11proto-dev wird gewählt. Vorbereitung zum Entpacken von .../42-x11proto-dev_2018.4-4_all.deb ... Entpacken von x11proto-dev (2018.4-4) ... Vormals nicht ausgewähltes Paket x11proto-core-dev wird gewählt. Vorbereitung zum Entpacken von .../43-x11proto-core-dev_2018.4-4_all.deb ... Entpacken von x11proto-core-dev (2018.4-4) ... Vormals nicht ausgewähltes Paket libxau-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../44-libxau-dev_1%3a1.0.8-1+b2_armhf.deb ... Entpacken von libxau-dev:armhf (1:1.0.8-1+b2) ... Vormals nicht ausgewähltes Paket libxdmcp-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../45-libxdmcp-dev_1%3a1.1.2-3_armhf.deb ... Entpacken von libxdmcp-dev:armhf (1:1.1.2-3) ... Vormals nicht ausgewähltes Paket xtrans-dev wird gewählt. Vorbereitung zum Entpacken von .../46-xtrans-dev_1.3.5-1_all.deb ... Entpacken von xtrans-dev (1.3.5-1) ... Vormals nicht ausgewähltes Paket libpthread-stubs0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../47-libpthread-stubs0-dev_0.4-1_armhf.deb ... Entpacken von libpthread-stubs0-dev:armhf (0.4-1) ... Vormals nicht ausgewähltes Paket libxcb1-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../48-libxcb1-dev_1.13.1-2_armhf.deb ... Entpacken von libxcb1-dev:armhf (1.13.1-2) ... Vormals nicht ausgewähltes Paket libx11-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../49-libx11-dev_2%3a1.6.7-1_armhf.deb ... Entpacken von libx11-dev:armhf (2:1.6.7-1) ... Vormals nicht ausgewähltes Paket libxrender-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../50-libxrender-dev_1%3a0.9.10-1_armhf.deb ... Entpacken von libxrender-dev:armhf (1:0.9.10-1) ... Vormals nicht ausgewähltes Paket x11proto-xext-dev wird gewählt. Vorbereitung zum Entpacken von .../51-x11proto-xext-dev_2018.4-4_all.deb ... Entpacken von x11proto-xext-dev (2018.4-4) ... Vormals nicht ausgewähltes Paket libxext-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../52-libxext-dev_2%3a1.3.3-1+b2_armhf.deb ... Entpacken von libxext-dev:armhf (2:1.3.3-1+b2) ... Vormals nicht ausgewähltes Paket x11-common wird gewählt. Vorbereitung zum Entpacken von .../53-x11-common_1%3a7.7+19_all.deb ... Entpacken von x11-common (1:7.7+19) ... Vormals nicht ausgewähltes Paket libice6:armhf wird gewählt. Vorbereitung zum Entpacken von .../54-libice6_2%3a1.0.9-2_armhf.deb ... Entpacken von libice6:armhf (2:1.0.9-2) ... Vormals nicht ausgewähltes Paket libsm6:armhf wird gewählt. Vorbereitung zum Entpacken von .../55-libsm6_2%3a1.2.3-1_armhf.deb ... Entpacken von libsm6:armhf (2:1.2.3-1) ... Vormals nicht ausgewähltes Paket libice-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../56-libice-dev_2%3a1.0.9-2_armhf.deb ... Entpacken von libice-dev:armhf (2:1.0.9-2) ... Vormals nicht ausgewähltes Paket libsm-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../57-libsm-dev_2%3a1.2.3-1_armhf.deb ... Entpacken von libsm-dev:armhf (2:1.2.3-1) ... Vormals nicht ausgewähltes Paket libpixman-1-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../58-libpixman-1-dev_0.36.0-1+rpt1_armhf.deb ... Entpacken von libpixman-1-dev:armhf (0.36.0-1+rpt1) ... Vormals nicht ausgewähltes Paket libxcb-render0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../59-libxcb-render0-dev_1.13.1-2_armhf.deb ... Entpacken von libxcb-render0-dev:armhf (1.13.1-2) ... Vormals nicht ausgewähltes Paket libxcb-shm0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../60-libxcb-shm0-dev_1.13.1-2_armhf.deb ... Entpacken von libxcb-shm0-dev:armhf (1.13.1-2) ... Vormals nicht ausgewähltes Paket libffi-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../61-libffi-dev_3.2.1-9_armhf.deb ... Entpacken von libffi-dev:armhf (3.2.1-9) ... Vormals nicht ausgewähltes Paket libglib2.0-bin wird gewählt. Vorbereitung zum Entpacken von .../62-libglib2.0-bin_2.58.3-2+deb10u2_armhf.deb ... Entpacken von libglib2.0-bin (2.58.3-2+deb10u2) ... Vormals nicht ausgewähltes Paket python3-lib2to3 wird gewählt. Vorbereitung zum Entpacken von .../63-python3-lib2to3_3.7.3-1_all.deb ... Entpacken von python3-lib2to3 (3.7.3-1) ... Vormals nicht ausgewähltes Paket python3-distutils wird gewählt. Vorbereitung zum Entpacken von .../64-python3-distutils_3.7.3-1_all.deb ... Entpacken von python3-distutils (3.7.3-1) ... Vormals nicht ausgewähltes Paket libglib2.0-dev-bin wird gewählt. Vorbereitung zum Entpacken von .../65-libglib2.0-dev-bin_2.58.3-2+deb10u2_armhf.deb ... Entpacken von libglib2.0-dev-bin (2.58.3-2+deb10u2) ... Vormals nicht ausgewähltes Paket libmount-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../66-libmount-dev_2.33.1-0.1_armhf.deb ... Entpacken von libmount-dev:armhf (2.33.1-0.1) ... Vormals nicht ausgewähltes Paket libpcre16-3:armhf wird gewählt. Vorbereitung zum Entpacken von .../67-libpcre16-3_2%3a8.39-12_armhf.deb ... Entpacken von libpcre16-3:armhf (2:8.39-12) ... Vormals nicht ausgewähltes Paket libpcre32-3:armhf wird gewählt. Vorbereitung zum Entpacken von .../68-libpcre32-3_2%3a8.39-12_armhf.deb ... Entpacken von libpcre32-3:armhf (2:8.39-12) ... Vormals nicht ausgewähltes Paket libpcrecpp0v5:armhf wird gewählt. Vorbereitung zum Entpacken von .../69-libpcrecpp0v5_2%3a8.39-12_armhf.deb ... Entpacken von libpcrecpp0v5:armhf (2:8.39-12) ... Vormals nicht ausgewähltes Paket libpcre3-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../70-libpcre3-dev_2%3a8.39-12_armhf.deb ... Entpacken von libpcre3-dev:armhf (2:8.39-12) ... Vormals nicht ausgewähltes Paket libsepol1-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../71-libsepol1-dev_2.8-1_armhf.deb ... Entpacken von libsepol1-dev:armhf (2.8-1) ... Vormals nicht ausgewähltes Paket libselinux1-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../72-libselinux1-dev_2.8-1+b1_armhf.deb ... Entpacken von libselinux1-dev:armhf (2.8-1+b1) ... Vormals nicht ausgewähltes Paket libglib2.0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../73-libglib2.0-dev_2.58.3-2+deb10u2_armhf.deb ... Entpacken von libglib2.0-dev:armhf (2.58.3-2+deb10u2) ... Vormals nicht ausgewähltes Paket libcairo2-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../74-libcairo2-dev_1.16.0-4+rpt1_armhf.deb ... Entpacken von libcairo2-dev:armhf (1.16.0-4+rpt1) ... Vormals nicht ausgewähltes Paket libfribidi-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../75-libfribidi-dev_1.0.5-3.1+deb10u1_armhf.deb ... Entpacken von libfribidi-dev:armhf (1.0.5-3.1+deb10u1) ... Vormals nicht ausgewähltes Paket libgdk-pixbuf2.0-bin wird gewählt. Vorbereitung zum Entpacken von .../76-libgdk-pixbuf2.0-bin_2.38.1+dfsg-1_armhf.deb ... Entpacken von libgdk-pixbuf2.0-bin (2.38.1+dfsg-1) ... Vormals nicht ausgewähltes Paket libgdk-pixbuf2.0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../77-libgdk-pixbuf2.0-dev_2.38.1+dfsg-1_armhf.deb ... Entpacken von libgdk-pixbuf2.0-dev:armhf (2.38.1+dfsg-1) ... Vormals nicht ausgewähltes Paket libgif7:armhf wird gewählt. Vorbereitung zum Entpacken von .../78-libgif7_5.1.4-3_armhf.deb ... Entpacken von libgif7:armhf (5.1.4-3) ... Vormals nicht ausgewähltes Paket libgif-dev wird gewählt. Vorbereitung zum Entpacken von .../79-libgif-dev_5.1.4-3_armhf.deb ... Entpacken von libgif-dev (5.1.4-3) ... Vormals nicht ausgewähltes Paket libgraphite2-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../80-libgraphite2-dev_1.3.13-7_armhf.deb ... Entpacken von libgraphite2-dev:armhf (1.3.13-7) ... Vormals nicht ausgewähltes Paket libharfbuzz-icu0:armhf wird gewählt. Vorbereitung zum Entpacken von .../81-libharfbuzz-icu0_2.3.1-1_armhf.deb ... Entpacken von libharfbuzz-icu0:armhf (2.3.1-1) ... Vormals nicht ausgewähltes Paket libicu-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../82-libicu-dev_63.1-6+deb10u1_armhf.deb ... Entpacken von libicu-dev:armhf (63.1-6+deb10u1) ... Vormals nicht ausgewähltes Paket libharfbuzz-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../83-libharfbuzz-dev_2.3.1-1_armhf.deb ... Entpacken von libharfbuzz-dev:armhf (2.3.1-1) ... Vormals nicht ausgewähltes Paket libjpeg62-turbo-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../84-libjpeg62-turbo-dev_1%3a1.5.2-2+b1_armhf.deb ... Entpacken von libjpeg62-turbo-dev:armhf (1:1.5.2-2+b1) ... Vormals nicht ausgewähltes Paket libjpeg-dev wird gewählt. Vorbereitung zum Entpacken von .../85-libjpeg-dev_1%3a1.5.2-2_all.deb ... Entpacken von libjpeg-dev (1:1.5.2-2) ... Vormals nicht ausgewähltes Paket libxft-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../86-libxft-dev_2.3.2-2_armhf.deb ... Entpacken von libxft-dev:armhf (2.3.2-2) ... Vormals nicht ausgewähltes Paket pango1.0-tools wird gewählt. Vorbereitung zum Entpacken von .../87-pango1.0-tools_1.42.4-7~deb10u1_armhf.deb ... Entpacken von pango1.0-tools (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket libpango1.0-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../88-libpango1.0-dev_1.42.4-7~deb10u1_armhf.deb ... Entpacken von libpango1.0-dev:armhf (1.42.4-7~deb10u1) ... Vormals nicht ausgewähltes Paket librsvg2-common:armhf wird gewählt. Vorbereitung zum Entpacken von .../89-librsvg2-common_2.44.10-2.1+rpi1_armhf.deb ... Entpacken von librsvg2-common:armhf (2.44.10-2.1+rpi1) ... Vormals nicht ausgewähltes Paket librsvg2-dev:armhf wird gewählt. Vorbereitung zum Entpacken von .../90-librsvg2-dev_2.44.10-2.1+rpi1_armhf.deb ... Entpacken von librsvg2-dev:armhf (2.44.10-2.1+rpi1) ... libpcrecpp0v5:armhf (2:8.39-12) wird eingerichtet ... libgraphite2-3:armhf (1.3.13-7) wird eingerichtet ... libpixman-1-0:armhf (0.36.0-1+rpt1) wird eingerichtet ... libpixman-1-dev:armhf (0.36.0-1+rpt1) wird eingerichtet ... libpcre16-3:armhf (2:8.39-12) wird eingerichtet ... libxrender1:armhf (1:0.9.10-1) wird eingerichtet ... libdatrie1:armhf (0.2.12-2) wird eingerichtet ... libxcb-render0:armhf (1.13.1-2) wird eingerichtet ... libfribidi-dev:armhf (1.0.5-3.1+deb10u1) wird eingerichtet ... libgdk-pixbuf2.0-common (2.38.1+dfsg-1) wird eingerichtet ... x11-common (1:7.7+19) wird eingerichtet ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults libsepol1-dev:armhf (2.8-1) wird eingerichtet ... libglib2.0-bin (2.58.3-2+deb10u2) wird eingerichtet ... liblzo2-2:armhf (2.10-0.1) wird eingerichtet ... libxcb-shm0:armhf (1.13.1-2) wird eingerichtet ... libffi-dev:armhf (3.2.1-9) wird eingerichtet ... libpthread-stubs0-dev:armhf (0.4-1) wird eingerichtet ... libjbig0:armhf (2.1-3.1+b2) wird eingerichtet ... xtrans-dev (1.3.5-1) wird eingerichtet ... libgraphite2-dev:armhf (1.3.13-7) wird eingerichtet ... libjpeg62-turbo-dev:armhf (1:1.5.2-2+b1) wird eingerichtet ... uuid-dev:armhf (2.33.1-0.1) wird eingerichtet ... libpcre32-3:armhf (2:8.39-12) wird eingerichtet ... libwebp6:armhf (0.6.1-2) wird eingerichtet ... libcroco3:armhf (0.6.12-3) wird eingerichtet ... icu-devtools (63.1-6+deb10u1) wird eingerichtet ... fonts-dejavu-core (2.37-1) wird eingerichtet ... libgif7:armhf (5.1.4-3) wird eingerichtet ... libgif-dev (5.1.4-3) wird eingerichtet ... libharfbuzz0b:armhf (2.3.1-1) wird eingerichtet ... libthai-data (0.1.28-2) wird eingerichtet ... libgirepository-1.0-1:armhf (1.58.3-2) wird eingerichtet ... xorg-sgml-doctools (1:1.11-1) wird eingerichtet ... libtiff5:armhf (4.1.0+git191117-2~deb10u1) wird eingerichtet ... python3-lib2to3 (3.7.3-1) wird eingerichtet ... libicu-dev:armhf (63.1-6+deb10u1) wird eingerichtet ... python3-distutils (3.7.3-1) wird eingerichtet ... x11proto-dev (2018.4-4) wird eingerichtet ... libglib2.0-dev-bin (2.58.3-2+deb10u2) wird eingerichtet ... libblkid-dev:armhf (2.33.1-0.1) wird eingerichtet ... libice6:armhf (2:1.0.9-2) wird eingerichtet ... libharfbuzz-icu0:armhf (2.3.1-1) wird eingerichtet ... libxau-dev:armhf (1:1.0.8-1+b2) wird eingerichtet ... libice-dev:armhf (2:1.0.9-2) wird eingerichtet ... libpcre3-dev:armhf (2:8.39-12) wird eingerichtet ... fontconfig-config (2.13.1-2) wird eingerichtet ... libjpeg-dev (1:1.5.2-2) wird eingerichtet ... libharfbuzz-gobject0:armhf (2.3.1-1) wird eingerichtet ... libthai0:armhf (0.1.28-2) wird eingerichtet ... libxdmcp-dev:armhf (1:1.1.2-3) wird eingerichtet ... x11proto-core-dev (2018.4-4) wird eingerichtet ... libgdk-pixbuf2.0-0:armhf (2.38.1+dfsg-1) wird eingerichtet ... gir1.2-glib-2.0:armhf (1.58.3-2) wird eingerichtet ... x11proto-xext-dev (2018.4-4) wird eingerichtet ... libgdk-pixbuf2.0-bin (2.38.1+dfsg-1) wird eingerichtet ... libfontconfig1:armhf (2.13.1-2) wird eingerichtet ... libsm6:armhf (2:1.2.3-1) wird eingerichtet ... libmount-dev:armhf (2.33.1-0.1) wird eingerichtet ... fontconfig (2.13.1-2) wird eingerichtet ... Regenerating fonts cache... done. libxft2:armhf (2.3.2-2) wird eingerichtet ... libfontconfig1-dev:armhf (2.13.1-2) wird eingerichtet ... libxcb1-dev:armhf (1.13.1-2) wird eingerichtet ... gir1.2-gdkpixbuf-2.0:armhf (2.38.1+dfsg-1) wird eingerichtet ... libsm-dev:armhf (2:1.2.3-1) wird eingerichtet ... libselinux1-dev:armhf (2.8-1+b1) wird eingerichtet ... libpango-1.0-0:armhf (1.42.4-7~deb10u1) wird eingerichtet ... libx11-dev:armhf (2:1.6.7-1) wird eingerichtet ... gir1.2-harfbuzz-0.0:armhf (2.3.1-1) wird eingerichtet ... libcairo2:armhf (1.16.0-4+rpt1) wird eingerichtet ... libxcb-shm0-dev:armhf (1.13.1-2) wird eingerichtet ... libglib2.0-dev:armhf (2.58.3-2+deb10u2) wird eingerichtet ... libxcb-render0-dev:armhf (1.13.1-2) wird eingerichtet ... libxext-dev:armhf (2:1.3.3-1+b2) wird eingerichtet ... libcairo-gobject2:armhf (1.16.0-4+rpt1) wird eingerichtet ... libpangoft2-1.0-0:armhf (1.42.4-7~deb10u1) wird eingerichtet ... libxrender-dev:armhf (1:0.9.10-1) wird eingerichtet ... libpangocairo-1.0-0:armhf (1.42.4-7~deb10u1) wird eingerichtet ... libxft-dev:armhf (2.3.2-2) wird eingerichtet ... libcairo-script-interpreter2:armhf (1.16.0-4+rpt1) wird eingerichtet ... gir1.2-freedesktop:armhf (1.58.3-2) wird eingerichtet ... libpangoxft-1.0-0:armhf (1.42.4-7~deb10u1) wird eingerichtet ... pango1.0-tools (1.42.4-7~deb10u1) wird eingerichtet ... librsvg2-2:armhf (2.44.10-2.1+rpi1) wird eingerichtet ... gir1.2-pango-1.0:armhf (1.42.4-7~deb10u1) wird eingerichtet ... librsvg2-common:armhf (2.44.10-2.1+rpi1) wird eingerichtet ... gir1.2-rsvg-2.0:armhf (2.44.10-2.1+rpi1) wird eingerichtet ... Trigger für libglib2.0-0:armhf (2.58.3-2+deb10u2) werden verarbeitet ... Keine Schema-Dateien gefunden: Nichts wird getan. Trigger für libc-bin (2.28-10+rpi1) werden verarbeitet ... Trigger für systemd (241-7~deb10u3+rpi1) werden verarbeitet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... libgdk-pixbuf2.0-dev:armhf (2.38.1+dfsg-1) wird eingerichtet ... libcairo2-dev:armhf (1.16.0-4+rpt1) wird eingerichtet ... Trigger für install-info (6.5.0.dfsg.1-4+b1) werden verarbeitet ... libharfbuzz-dev:armhf (2.3.1-1) wird eingerichtet ... libpango1.0-dev:armhf (1.42.4-7~deb10u1) wird eingerichtet ... librsvg2-dev:armhf (2.44.10-2.1+rpi1) wird eingerichtet ... Trigger für libgdk-pixbuf2.0-0:armhf (2.38.1+dfsg-1) werden verarbeitet ... pi@raspberrypi:/ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm i canvas > canvas@2.6.1 install /opt/iobroker/node_modules/canvas > node-pre-gyp install --fallback-to-build node-pre-gyp WARN Using request for node-pre-gyp https download node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.6.1/canvas-v2.6.1-node-v64-linux-glibc-arm.tar.gz node-pre-gyp WARN Pre-built binaries not found for canvas@2.6.1 and node@10.20.1 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node COPY Release/canvas-postbuild.node CXX(target) Release/obj.target/canvas/src/backend/Backend.o In file included from ../src/backend/Backend.h:6, from ../src/backend/Backend.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/backend/Backend.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o In file included from ../src/backend/Backend.h:6, from ../src/backend/ImageBackend.h:3, from ../src/backend/ImageBackend.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/backend/ImageBackend.h:3, from ../src/backend/ImageBackend.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o In file included from ../src/backend/Backend.h:6, from ../src/backend/PdfBackend.h:3, from ../src/backend/PdfBackend.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/backend/PdfBackend.h:3, from ../src/backend/PdfBackend.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o In file included from ../src/backend/Backend.h:6, from ../src/backend/SvgBackend.h:3, from ../src/backend/SvgBackend.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/backend/SvgBackend.h:3, from ../src/backend/SvgBackend.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o ../src/bmp/BMPParser.cc: In member function ‘void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)’: ../src/bmp/BMPParser.cc:189:16: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare] E(ptr - data > imgdOffset, "image data overlaps with another structure"); ~~~~~~~~~~~^~~~~~~~~~~~ ../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ ../src/bmp/BMPParser.cc:204:27: warning: comparison of integer expressions of different signedness: ‘uint32_t’ {aka ‘unsigned int’} and ‘int’ [-Wsign-compare] E(ptr - data + imgdSize > len, "not enough image data"); ~~~~~~~~~~~~~~~~~~~~~~^~~~~ ../src/bmp/BMPParser.cc:10:25: note: in definition of macro ‘E’ #define E(cond, msg) if(cond) return setErr(msg) ^~~~ CXX(target) Release/obj.target/canvas/src/Backends.o In file included from ../src/backend/Backend.h:6, from ../src/Backends.h:3, from ../src/Backends.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Backends.h:3, from ../src/Backends.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/Canvas.o In file included from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/Canvas.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/Canvas.cc: In static member function ‘static Nan::NAN_METHOD_RETURN_TYPE Canvas::ToBuffer(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/Canvas.cc:415:26: warning: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘unsigned int’} [-Wsign-compare] if (canvas->nBytes() > node::Buffer::kMaxLength) { ~~~~~~~~~~~~~~~~~^~~~~~ ../src/Canvas.cc:479:79: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, ToPngBufferAsync, (uv_after_work_cb)ToBufferAsyncAfter); ^~~~~~~~~~~~~~~~~~ ../src/Canvas.cc:520:80: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, ToJpegBufferAsync, (uv_after_work_cb)ToBufferAsyncAfter); ^~~~~~~~~~~~~~~~~~ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/Canvas.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/CanvasGradient.o In file included from ../src/CanvasGradient.h:5, from ../src/CanvasGradient.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/CanvasGradient.h:5, from ../src/CanvasGradient.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/CanvasPattern.o In file included from ../src/CanvasPattern.h:6, from ../src/CanvasPattern.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/CanvasPattern.h:6, from ../src/CanvasPattern.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o In file included from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/CanvasRenderingContext2d.h:6, from ../src/CanvasRenderingContext2d.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/CanvasRenderingContext2d.h:6, from ../src/CanvasRenderingContext2d.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/closure.o In file included from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/closure.h:5, from ../src/closure.cc:1: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Canvas.h:5, from ../src/closure.h:5, from ../src/closure.cc:1: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/color.o CXX(target) Release/obj.target/canvas/src/Image.o In file included from ../src/Image.h:8, from ../src/Image.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/Image.h:8, from ../src/Image.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/ImageData.o In file included from ../src/ImageData.h:5, from ../src/ImageData.cc:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/ImageData.h:5, from ../src/ImageData.cc:3: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/init.o In file included from ../src/backend/Backend.h:6, from ../src/Backends.h:3, from ../src/init.cc:17: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Backends.h:3, from ../src/init.cc:17: ../src/init.cc: At global scope: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:607:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/init.cc:88:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(canvas, init); ^~~~~~~~~~~ In file included from /home/iobroker/.cache/node-gyp/10.20.1/include/node/node.h:63, from ../../nan/nan.h:56, from ../src/backend/Backend.h:6, from ../src/Backends.h:3, from ../src/init.cc:17: /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’: /home/iobroker/.cache/node-gyp/10.20.1/include/node/node_object_wrap.h:84:78: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] reinterpret_cast<Callback>(callback), type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/iobroker/.cache/node-gyp/10.20.1/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] CXX(target) Release/obj.target/canvas/src/register_font.o SOLINK_MODULE(target) Release/obj.target/canvas.node COPY Release/canvas.node make: Verzeichnis „/opt/iobroker/node_modules/canvas/build“ wird verlassen npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.5 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.5: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + canvas@2.6.1 added 20 packages from 12 contributors in 62.186s 10 packages are looking for funding run `npm fund` for details pi@raspberrypi:/opt/iobroker $ -
@varg
Sieht sauber aus. Jetzt dürften deine 'gyp'-Fehler weg sein.
Bei Wechseln der node Version wirst du aber wahrscheinlich 'canvas' wieder bauen müssen. -
klasse herzlichen dank
keine Fehlermeldungen mehr
$ ./iobroker url "https://github.com/ioBroker/ioBroker.javascript/tarball/master" javascript install https://github.com/ioBroker/ioBroker.javascript/tarball/master NPM version: 6.14.4 npm install https://github.com/ioBroker/ioBroker.javascript/tarball/master --loglevel error --prefix "/opt/iobroker" (System call) upload [100] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/basic-languages/pgsql/pgsql.js vs/basic-languages/pgsql/pgsql.js application/javascript upload [90] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/basic-languages/handlebars/handlebars.js vs/basic-languages/handlebars/handlebars.js application/javascript upload [80] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/vs/base/worker/workerMain.js vs/base/worker/workerMain.js application/javascript upload [70] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/static/js/2.e4d73b14.chunk.js.LICENSE.txt static/js/2.e4d73b14.chunk.js.LICENSE.txt text/plain upload [60] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/index_m.html index_m.html text/html upload [50] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/own/msg/de.js google-blockly/own/msg/de.js application/javascript upload [40] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/own/blocks_sendto.js google-blockly/own/blocks_sendto.js application/javascript upload [30] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/msg/js/it.js google-blockly/msg/js/it.js application/javascript upload [20] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/handopen.cur google-blockly/media/handopen.cur null upload [19] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/handdelete.cur google-blockly/media/handdelete.cur null upload [18] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/handclosed.cur google-blockly/media/handclosed.cur null upload [17] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/dropdown-arrow.svg google-blockly/media/dropdown-arrow.svg image/svg+xml upload [16] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/disconnect.wav google-blockly/media/disconnect.wav audio/wav upload [15] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/disconnect.ogg google-blockly/media/disconnect.ogg audio/ogg upload [14] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/disconnect.mp3 google-blockly/media/disconnect.mp3 audio/mpeg upload [13] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/delete.wav google-blockly/media/delete.wav audio/wav upload [12] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/delete.ogg google-blockly/media/delete.ogg audio/ogg upload [11] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/delete.mp3 google-blockly/media/delete.mp3 audio/mpeg upload [10] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/click.wav google-blockly/media/click.wav audio/wav upload [9] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/click.ogg google-blockly/media/click.ogg audio/ogg upload [8] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/click.mp3 google-blockly/media/click.mp3 audio/mpeg upload [7] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/media/1x1.gif google-blockly/media/1x1.gif image/gif upload [6] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/javascript_compressed.js google-blockly/javascript_compressed.js application/javascript upload [5] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/blocks_compressed.js google-blockly/blocks_compressed.js application/javascript upload [4] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/blockly_compressed.js google-blockly/blockly_compressed.js application/javascript upload [3] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/google-blockly/LICENSE google-blockly/LICENSE null upload [2] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/favicon.ico favicon.ico image/vnd.microsoft.icon upload [1] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/asset-manifest.json asset-manifest.json application/json upload [0] javascript.admin /opt/iobroker/node_modules/iobroker.javascript/admin/adminWords.js adminWords.js application/javascript process exited with code 0 -
@varg
Siehste... -
@varg Läuft da eigentlich die graphische Oberfläche mit?
who -r
