UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Glasfaser]

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

...................
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@11.6.0 (node-v67 ABI, glibc) (falling back to source compile with node-gyp)
....
Sundance

binaries not found for canvas

[Sundance]

@Glasfaser Danke für den Hinweis, den Thread hatte ich soweit durch und auch die Libraries gemäß Angaben vorher aktualisiert.. leider bleibt das Resultat gleich. Ich denke ich werde an meiner node version schrauben müssen...

[Glasfaser]

@Sundance

NPM Version 6.7.0 ... mhhh ?? ... Zeig mal : nodejs -v

sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs
sudo apt-get autoremove
sudo reboot

curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
sudo apt-get install -y build-essential libavahi-compat-libdnssd-dev libudev-dev libpam0g-dev nodejs
sudo reboot

cd /opt/iobroker

und dann noch npm rebuild und wieder reboot.

Kenn dein System nicht ... dann eventuell noch :

curl -sL https://raw.githubusercontent.com/ioBroker/ioBroker/stable-installer/fix_installation.sh | bash -

[Sundance]

@Glasfaser - mein nodejs -v sagt:

pi@HOME:~ $ nodejs -v
v10.16.2

Soll ich deinen Vorschlag unabhängig davon testen, oder soll ich vorher noch was eine andere NPM version installieren oder sowas?

Danke für deine Hilfe..

Beste Grüße

Sundance

[Glasfaser]

@Sundance

Die Versionen passen nicht zusammen .

nimm meinen Vorschlag ...
( kann dir leider nur halb helfen da ich eine Synology habe unter Docker deshalb nimm den Thread was dir dna909 vorgeschlagen hat .)

[Sundance]

@Glasfaser - dein Vorschlag hat soweit erstmal super funktioniert, ich habe jetzt folgende Versionen:

Node v10.16.2
NPM 6.9.0

Allerdings habe ich jetzt wieder ein anderes Problem, nämlich mit dem Zigbee Adapter:

error: Caught by controller[0]: /opt/iobroker/node_modules/bindings/bindings.js:88
error: Caught by controller[0]: throw e
error: Caught by controller[0]: ^
error: Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node'
error: Caught by controller[0]: was compiled against a different Node.js version using
error: Caught by controller[0]: NODE_MODULE_VERSION 67. This version of Node.js requires
error: Caught by controller[0]: NODE_MODULE_VERSION 64. Please try re-compiling or re-installing
error: Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`).
error: Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:807:18)
error: Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
error: Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
error: Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
error: Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
error: Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
error: Caught by controller[0]: at bindings (/opt/iobroker/node_modules/bindings/bindings.js:81:44)
error: Caught by controller[0]: at Object. (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:1:36)
error: Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
error: Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
error: host.HOME instance system.adapter.zigbee.0 terminated with code 1 ()

das war eigentlich mal behoben, ist jetzt aber wieder da.. hat wohl offenbar mit dem Serialport zu tun. Hast du da zufällig auch eine Idee?

Danke und beste Grüße

Sundance

[Glasfaser]

@Sundance

Versuch mal :

npm rebuild

[Sundance]

@Glasfaser - das Serialport Problem konnte ich mit deinem ersten Vorschlag jetzt lösen. Allerdings ist das ursprüngliche problem, nämlich die iobroker.roomba Adapterinstallation leider immernoch ein Problem.. ich bekomme die gleiche Fehlermeldung:

pi@HOME:~ $ iobroker install iobroker.roomba
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp WARN Using request for node-pre-gyp https download 
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz 
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
../src/bmp/BMPParser.cc: In member function 'void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)':
../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/CanvasRenderingContext2d.cc: In static member function 'static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)':
../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Error 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 
node-pre-gyp ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.57-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
npm WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T10_20_42_621Z-debug.log
host.HOME Adapter directory "null" does not exists
Cannot parse null/io-package.json:Error: ENOENT: no such file or directory, open 'null/io-package.json'

Kann ich die canvas Installation irgendwie manuell machen, damit sich der Installer nicht daran aufhängt? Oder ist die Wurzel des Problems woanders?

Danke nochmal für deine Hilfe..

Beste Grüße

sundance

[Glasfaser]

@Sundance

Welche Versin von Js-controller hast du ?

[Sundance]

@Glasfaser ich habe aktuell die 1.5.14 installiert.

[Glasfaser]

@Sundance

Wie sieht es hiermit aus

Installationsanweisungen folgen !!!

Link Text

[Sundance]

@Glasfaser Ja, das hatte ich schon probiert vorhin.. ironischerweise kommen bei der Canvas installation gemäß dem Befehl aus der Installationsanleitung die gleichen Fehler (zumindest auf den ersten Blick):

root@HOME:~# cd /opt/iobroker
root@HOME:/opt/iobroker# sudo npm install canvas --unsafe-perm=true

> canvas@2.5.0 install /opt/iobroker/node_modules/canvas
> node-pre-gyp install --fallback-to-build

node-pre-gyp WARN Using request for node-pre-gyp https download 
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz 
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
make: Entering directory '/opt/iobroker/node_modules/canvas/build'
  SOLINK_MODULE(target) Release/obj.target/canvas-postbuild.node
  COPY Release/canvas-postbuild.node
  CXX(target) Release/obj.target/canvas/src/backend/Backend.o
  CXX(target) Release/obj.target/canvas/src/backend/ImageBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/PdfBackend.o
  CXX(target) Release/obj.target/canvas/src/backend/SvgBackend.o
  CXX(target) Release/obj.target/canvas/src/bmp/BMPParser.o
../src/bmp/BMPParser.cc: In member function 'void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)':
../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
  CXX(target) Release/obj.target/canvas/src/Backends.o
  CXX(target) Release/obj.target/canvas/src/Canvas.o
  CXX(target) Release/obj.target/canvas/src/CanvasGradient.o
  CXX(target) Release/obj.target/canvas/src/CanvasPattern.o
  CXX(target) Release/obj.target/canvas/src/CanvasRenderingContext2d.o
../src/CanvasRenderingContext2d.cc: In static member function 'static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)':
../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /root/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /root/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
canvas.target.mk:138: recipe for target 'Release/obj.target/canvas/src/CanvasRenderingContext2d.o' failed
make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Error 1
make: Leaving directory '/opt/iobroker/node_modules/canvas/build'
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 
node-pre-gyp ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.57-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
npm WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-08-08T11_38_50_244Z-debug.log

Allerdings steht in der Anleitung auch, dass man Canvas in den iobroker.roomba Ordner erstellen soll. Der existiert aber bei mir (noch) nicht, zumindest nicht in /opt/iobroker/node_modules/ - oder muss der woanders hin? Muss ich den vorher händisch erstellen, oder bringt das nix?

Sorry, ich bin lost :D Danke für deine Geduld

Beste Grüße

Florian

[Glasfaser]

@Sundance

Hast Du eingentlich schon mal wieder versucht roomba über die Konsole ganz normal zu installieren !?

[Sundance]

@Glasfaser Ja, habe es grade nochmal probiert.. aber die Fehler bleiben leider bestehen. Die Canvas Installation schlägt nachwievor fehl.. manuell installiert bekomme ich sie auch nicht.

Ich habe grade nochmal die Verzeichnisberechtigungen "bereinigt", aber es hat leider nicht geholfen.

Hast du noch eine Idee? In meinem letzten Installations-log Scheint es auch Probleme zu geben, einfache Ordner zu erstellen:

gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.2"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error 
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/canvas/build'
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"

Es hilft nicht, diese Ordner händisch zu erstellen, oder?

[sigi234]

@Sundance sagte in Adapterinstallation schlägt fehl - node-gyp Fehler:

EACCES: permission denied, mkdir '/opt/iobroker/node_modules/canvas/build'

einfach mal den Installations-Fixer anwenden: curl -sL https://iobroker.net/fix.sh | bash -

[Sundance]

@sigi234 Danke, Das hat das "permission denied" Problem behoben - aber den Rest leider nicht..

root@HOME:/opt/iobroker# iobroker install iobroker.roomba
NPM version: 6.9.0
npm install iobroker.roomba@1.0.0 --production --save --prefix "/opt/iobroker" (System call)
node-pre-gyp WARN Using request for node-pre-gyp https download 
node-pre-gyp WARN Tried to download(404): https://github.com/node-gfx/node-canvas-prebuilt/releases/download/v2.5.0/canvas-v2.5.0-node-v64-linux-glibc-arm.tar.gz 
node-pre-gyp WARN Pre-built binaries not found for canvas@2.5.0 and node@10.16.2 (node-v64 ABI, glibc) (falling back to source compile with node-gyp) 
../src/bmp/BMPParser.cc: In member function 'void BMPParser::Parser::parse(uint8_t*, int, uint8_t*)':
../src/bmp/BMPParser.cc:193:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data > imgdOffset, "image data overlaps with another structure");
     ~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/bmp/BMPParser.cc:208:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
   E(ptr - data + imgdSize > len, "not enough image data");
     ~~~~~~~~~~~~~~~~~~~~~~^~~
../src/bmp/BMPParser.cc:10:25: note: in definition of macro 'E'
 #define E(cond, msg) if(cond) return setErr(msg)
                         ^~~~
../src/CanvasRenderingContext2d.cc: In static member function 'static Nan::NAN_METHOD_RETURN_TYPE Context2d::DrawImage(Nan::NAN_METHOD_ARGS_TYPE)':
../src/CanvasRenderingContext2d.cc:1291:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_x = abs(transforms[1]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
../src/CanvasRenderingContext2d.cc:1292:45: error: call of overloaded 'abs(double&)' is ambiguous
   double current_scale_y = abs(transforms[2]);
                                             ^
In file included from /usr/include/c++/6/cstdlib:75:0,
                 from /usr/include/c++/6/ext/string_conversions.h:41,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/stdlib.h:735:12: note: candidate: int abs(int)
 extern int abs (int __x) __THROW __attribute__ ((__const__)) __wur;
            ^~~
In file included from /usr/include/c++/6/ext/string_conversions.h:41:0,
                 from /usr/include/c++/6/bits/basic_string.h:5417,
                 from /usr/include/c++/6/string:52,
                 from /usr/include/c++/6/stdexcept:39,
                 from /usr/include/c++/6/array:39,
                 from /usr/include/c++/6/tuple:39,
                 from /usr/include/c++/6/functional:55,
                 from /usr/include/c++/6/memory:79,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/v8.h:21,
                 from /home/iobroker/.node-gyp/10.16.2/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/backend/Backend.h:6,
                 from ../src/Canvas.h:5,
                 from ../src/CanvasRenderingContext2d.h:6,
                 from ../src/CanvasRenderingContext2d.cc:3:
/usr/include/c++/6/cstdlib:180:3: note: candidate: long long int std::abs(long long int)
   abs(long long __x) { return __builtin_llabs (__x); }
   ^~~
/usr/include/c++/6/cstdlib:172:3: note: candidate: long int std::abs(long int)
   abs(long __i) { return __builtin_labs(__i); }
   ^~~
make: *** [Release/obj.target/canvas/src/CanvasRenderingContext2d.o] Error 1
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:262:23)
gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:248:12)
gyp ERR! System Linux 4.19.57-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "build" "--fallback-to-build" "--module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node" "--module_name=canvas" "--module_path=/opt/iobroker/node_modules/canvas/build/Release" "--napi_version=4" "--node_abi_napi=napi" "--napi_build_version=0" "--node_napi_label=node-v64"
gyp ERR! cwd /opt/iobroker/node_modules/canvas
gyp ERR! node -v v10.16.2
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 
node-pre-gyp ERR! build error 
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js build --fallback-to-build --module=/opt/iobroker/node_modules/canvas/build/Release/canvas.node --module_name=canvas --module_path=/opt/iobroker/node_modules/canvas/build/Release --napi_version=4 --node_abi_napi=napi --napi_build_version=0 --node_napi_label=node-v64' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/canvas/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.57-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/canvas/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
node-pre-gyp ERR! node -v v10.16.2
node-pre-gyp ERR! node-pre-gyp -v v0.11.0
node-pre-gyp ERR! not ok 
npm WARN bl@0.7.0 requires a peer of stream-browserify@* but none is installed. You must install peer dependencies yourself.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.3 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! canvas@2.5.0 install: `node-pre-gyp install --fallback-to-build`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the canvas@2.5.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-08-08T12_06_49_697Z-debug.log
host.HOME Adapter directory "null" does not exists
Cannot parse null/io-package.json:Error: ENOENT: no such file or directory, open 'null/io-package.json'

Gibt es außer einer kompletten Neuinstallation noch irgendwas, was ich testen könnte?

Danke und beste grüße

Sundance

[sigi234]

@Sundance

Was sagt :
node -v
npm -v
iobroker list instances

[Sundance]

@sigi234

Hier die drei Ausgaben:

pi@HOME:~ $ node -v
v10.16.2

pi@HOME:~ $ npm -v
6.9.0

pi@HOME:~ $ iobroker list instances
+ system.adapter.admin.0                 : admin       -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.cloud.0                 : cloud       - disabled
+ system.adapter.discovery.0             : discovery   -  enabled
  system.adapter.ham.0                   : ham         -  enabled
+ system.adapter.history.0               : history     -  enabled
+ system.adapter.hm-rega.0               : hm-rega     -  enabled
+ system.adapter.hm-rpc.0                : hm-rpc      -  enabled, port: 0
+ system.adapter.hm-rpc.1                : hm-rpc      -  enabled, port: 0
+ system.adapter.hue.0                   : hue         -  enabled, port: 80
  system.adapter.info.0                  : info        -  enabled
  system.adapter.iot.0                   : iot         - disabled
+ system.adapter.javascript.0            : javascript  -  enabled
  system.adapter.mobile.0                : mobile      - disabled
  system.adapter.node-red.0              : node-red    -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.sayit.0                 : sayit       -  enabled, port: 0
  system.adapter.sonos.0                 : sonos       -  enabled
  system.adapter.tr-064.0                : tr-064      -  enabled
+ system.adapter.web.0                   : web         -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.web.1                   : web         -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                : zigbee      -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0019366630-if00

+ instance is alive

[sigi234]

@Sundance

Das passt Alles, ioBroker neu starten......

[Sundance]

@sigi234 Habe ich gemacht - Installation nochmal versucht, gleiche Fehler wie vorher.. Gibt es noch etwas, was ich versuchen kann?

Danke vorab für deine Hilfe!