Blink Camera System

[Soukai]

@pischleuder Möchte nicht aufdringlich wirken, aber hätten sie wieder zeit?

[Pischleuder]

@soukai

Hi,

versuche doch bitte einmal Dein script in den /opt/iobroker Ordner zu kopieren und starte das
in der Konsole normal, also ohne sudo und poste das Ergebnis.

[Soukai]

@pischleuder Hey,
inzwischen dies hier, aber wahrscheinlich wegen der neuen blink doorbell. bild2 ist ohne json credentials. 1 mit. Ist aber der gleiche text wie im blinkpy ordner

saeko@raspberrypi:/opt/iobroker $ python bild2.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932081&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:/opt/iobroker $

saeko@raspberrypi:~/blinkpy $ saeko@raspberrypi:~/blinkpy $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:~/blinkpy $ python bild2.py
python3.8: can't open file 'bild2.py': [Errno 2] No such file or directory
saeko@raspberrypi:~/blinkpy $ python bild2.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932467&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

[Pischleuder]

@soukai

der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:

./bild.py

Ausserdem fehlt in Deinem script etwas:

from blinkpy.camera import BlinkCamera

Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):

als normaler user saeko
pip3 install blinkpy

mit sudo
sudo -H -u iobroker pip3 install blinkpy

[Soukai]

@pischleuder said in Blink Camera System:

@soukai

der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:

./bild.py

Habe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:

Ausserdem fehlt in Deinem script etwas:

from blinkpy.camera import BlinkCamera

Zeile wurde jetzt eingefügt.

mein script bis jetzt:

#!/usr/bin/python3
import requests

from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.helpers.util import json_load
from blinkpy.camera import BlinkCamera

blink = Blink()
auth = Auth(json_load("/home/saeko/blink/cred.json"))
blink.auth = auth
blink.start()

#auth.send_auth_key(blink, "x")
#blink.setup_post_verify()

###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll >

bild = './haustuer.jpg'
#bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg'
#for name, camera in blink.cameras.items(): print(name), print(camera.attribute>

#### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm>

camera = blink.cameras['Haustür']
camera.snap_picture()
blink.refresh()
camera.image_to_file(bild)

#payload = {'value':bild}
#r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>

#### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm>

#camera = blink.cameras['Türklingel']
#camera.snap_picture()
#blink.refresh()
#camera.image_to_file(bild2)

#payload = {'value':bild}
#r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>

Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):

als normaler user saeko
pip3 install blinkpy

mit sudo
sudo -H -u iobroker pip3 install blinkpy

Hatte dies schon installiert, leider auch keine Änderung

saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy
Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0)
Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1)
Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2)
Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2)
Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0)
Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9)
Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3)
Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12)
Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1)
saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0)
Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1)
Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1)
Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2)
Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0)
Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3)
Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10)
Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11)
Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20)
saeko@raspberrypi:~/blinkpy $

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:

saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

[Pischleuder]

@soukai

Jep, du rufst das script mit dem json parameter auf und das wird nicht akzeptiert

Warum?
Was steht da drin ? --> Username und Passwort ?

[Soukai]

@pischleuder
meinst du

auth = Auth(json_load("/home/saeko/blink/cred.json"))

da stehen die Kontodaten drin. Ich probiers mal ohne. sollte sich aber eigentlich nichts ändern

Was steht da drin ? --> Username und Passwort ?

japp

[Pischleuder]

@soukai sagte in Blink Camera System:

Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:

saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen

[Pischleuder]

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Dieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit

#!/usr/bin/python3

[Pischleuder]

@pischleuder

ggf. einmal dieses script erstellen und laufen lassen:

#!/usr/bin/python3

###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert #####
import requests
import time
#from pushover import init, Client
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.camera import BlinkCamera
blink = Blink()
auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True)
blink.auth = auth
blink.start()
auth.send_auth_key(blink, "hier blink key")
blink.setup_post_verify()
for name, camera in blink.cameras.items(): print(name), print(camera.attributes)

Nicht das bei den / der Kamera was nicht stimmt.

[Soukai]

@pischleuder said in Blink Camera System:

@pischleuder

ggf. einmal dieses script erstellen und laufen lassen:

#!/usr/bin/python3

###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert #####
import requests
import time
#from pushover import init, Client
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.camera import BlinkCamera
blink = Blink()
auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True)
blink.auth = auth
blink.start()
auth.send_auth_key(blink, "hier blink key")
blink.setup_post_verify()
for name, camera in blink.cameras.items(): print(name), print(camera.attributes)

Nicht das bei den / der Kamera was nicht stimmt.

Das kam dabei raus:

saeko@raspberrypi:/opt/iobroker $ python bildneu.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 102, 'temperature_c': 38.9, 'temperature_calibrated': 102, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655982587&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}

Das json zu streichen hat auch nichts neues gebracht.
Das kommt von der Konsole wenn ichs streich. Wahrscheinlich nicht wichtig aber ich schicks mal.

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

@pischleuder said in Blink Camera System:

@soukai sagte in Blink Camera System:

Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:

saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen

Nagut

@pischleuder said in Blink Camera System:

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Dieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit

#!/usr/bin/python3

Meinst du in der Konsole oder in Iobroker dann? habe das mal versuchshalber ausprobiert in der Konsole und in iobroker:
./bild.py
aber konnte nicht aufgerufen werden. Habe auch das "#" entfernt probeweise im Script. Keine Änderung.

kommt folgendes in Konsole:

saeko@raspberrypi:/opt/iobroker $ sudo ./bild.py
sudo: ./bild.py: command not found
saeko@raspberrypi:/opt/iobroker $ ./bild.py
-bash: ./bild.py: Permission denied

[Pischleuder]

@soukai

Servus,

also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly

Ist das script ausführbar gemacht mit chmod 755 scriptname ?
Im script lässt du die Zeile mit python bitte genau so stehen, wie ich es gepostet hatte.
mach mal bitte ein ls -ldh bild.py und poste das Ergebnis.

[Soukai]

@pischleuder

also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly

Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer

saeko@raspberrypi:/opt/iobroker $ chmod 755 bildneu.py
saeko@raspberrypi:/opt/iobroker $ ./bildneu.py
-bash: ./bildneu.py: /usr/bin/python3^M: bad interpreter: No such file or directory
saeko@raspberrypi:/opt/iobroker $ chmod 755 bild.py
saeko@raspberrypi:/opt/iobroker $ ./bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Hier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):

saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py
-rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py
saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py
-rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.py

[Pischleuder]

@soukai sagte in Blink Camera System:

@pischleuder

also nochmal : lass alles ! mit sudo und python davorgestellt weg, sowohl in der Konsole (Terminal) als auch im iobroker blockly

Danke für deine Geduld! Habs jetzt wie du sagtest geändert. Rechte sind geändert und script läuft. Jedoch streikt er aber bei deinem Script, warum auch immer

Weil Du offensichtlich python3 nicht installiert hast , sondern nur python

Hier ein das Ergebnis von ls -ldh bild.py und bildneu.py (dein script):

saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py
-rwxr-xr-x+ 1 saeko saeko 1.3K Jun 23 13:21 bild.py
saeko@raspberrypi:/opt/iobroker $ ls -ldh bildneu.py
-rwxr-xr-x+ 1 saeko saeko 612 Jun 24 14:48 bildneu.py

Jep, jetzt sieht man auch, warum das script aus blockly nicht ausgeführt wird. Die Rechte müssen auf iobroker sein. Bei mir sieht das so aus:

-rwxrwxrwx+ 1 iobroker iobroker 1,7K Apr  6 15:41 blink-cameras.py
pi@raspberrypi2:/opt/iobroker $ 

[Soukai]

@pischleuder
ist das nicht python 3?

saeko@raspberrypi:/opt/iobroker $ python --version
Python 3.8.4

hoffentlich ist es das kannst mir vielleicht eben sagen wie ich die Rechte auf iobroker änder?

[Pischleuder]

@soukai

ja, mach mal ein

chown iobroker deinscript.py

danach nochmal ls -ldh

[Soukai]

@pischleuder

saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py
-rwxr-xr-x+ 1 iobroker saeko 1.3K Jun 23 13:21 bild.py

[Pischleuder]

@soukai

ok, mach folgendes:

chown iobroker:iobroker deinscript.py

[Soukai]

@pischleuder

saeko@raspberrypi:/opt/iobroker $ ls -ldh bild.py
-rwxr-xr-x+ 1 iobroker iobroker 1.3K Jun 23 13:21 bild.py

[Pischleuder]

@soukai

nun sollte es hoffentlich laufen...