[iot] Andere Probleme mit dem iot-Adapter bzw der Nutzung
-
Ich hoffe die richtige Zeile.
-
@Danny-Köhn Keine Screenshots, den kompletten Text in CodeTags hier rein.
-
code_text[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.118-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 SMP Mon Apr 27 14:26:42 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000 [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632 [ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 cma=256M video=HDMI-A-1:1280x720M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=DC:A6:32:5A:A9:F4 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ea7d04d6-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3735552K/4050944K available (8192K kernel code, 690K rwdata, 2420K rodata, 2048K init, 860K bss, 53248K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 691 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 861 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 28928 entries in 85 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000018] Switching to timer-based delay loop, resolution 18ns [ 0.000250] Console: colour dummy device 80x30 [ 0.000274] console [tty1] enabled [ 0.000319] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000336] pid_max: default: 32768 minimum: 301 [ 0.000609] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000627] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001388] CPU: Testing write buffer coherency: ok [ 0.001806] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002453] Setting up static identity map for 0x200000 - 0x20003c [ 0.002612] rcu: Hierarchical SRCU implementation. [ 0.003474] smp: Bringing up secondary CPUs ... [ 0.004280] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005205] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006087] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006206] smp: Brought up 1 node, 4 CPUs [ 0.006219] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.006229] CPU: All CPU(s) started in HYP mode. [ 0.006237] CPU: Virtualization extensions available. [ 0.007036] devtmpfs: initialized [ 0.017851] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.018068] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018088] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.025479] pinctrl core: initialized pinctrl subsystem [ 0.026336] NET: Registered protocol family 16 [ 0.029450] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.031075] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.031086] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.031281] Serial: AMBA PL011 UART driver [ 0.034385] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.050036] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-01 13:23, variant start [ 0.060050] raspberrypi-firmware soc:firmware: Firmware hash is 6379679d1ec6a8c746d7e77e015f5b56b939976f [ 0.102846] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.105949] vgaarb: loaded [ 0.106309] SCSI subsystem initialized [ 0.106498] usbcore: registered new interface driver usbfs [ 0.106555] usbcore: registered new interface driver hub [ 0.106624] usbcore: registered new device driver usb [ 0.108013] clocksource: Switched to clocksource arch_sys_counter [ 0.186398] VFS: Disk quotas dquot_6.6.0 [ 0.186478] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.186621] FS-Cache: Loaded [ 0.186818] CacheFiles: Loaded [ 0.187370] simple-framebuffer 3e8f6000.framebuffer: framebuffer at 0x3e8f6000, 0x2d1800 bytes, mapped to 0x(ptrval) [ 0.187385] simple-framebuffer 3e8f6000.framebuffer: format=a8r8g8b8, mode=1184x624x32, linelength=4736 [ 0.191495] Console: switching to colour frame buffer device 148x39 [ 0.194997] simple-framebuffer 3e8f6000.framebuffer: fb0: simplefb registered! [ 0.204085] NET: Registered protocol family 2 [ 0.204724] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.204748] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.204815] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.204885] TCP: Hash tables configured (established 8192 bind 8192) [ 0.205004] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.205030] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.205235] NET: Registered protocol family 1 [ 0.205772] RPC: Registered named UNIX socket transport module. [ 0.205782] RPC: Registered udp transport module. [ 0.205791] RPC: Registered tcp transport module. [ 0.205800] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.205815] PCI: CLS 0 bytes, default 64 [ 0.207763] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.209934] Initialise system trusted keyrings [ 0.210125] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.219200] FS-Cache: Netfs 'nfs' registered for caching [ 0.219710] NFS: Registering the id_resolver key type [ 0.219734] Key type id_resolver registered [ 0.219743] Key type id_legacy registered [ 0.219767] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.224286] Key type asymmetric registered [ 0.224296] Asymmetric key parser 'x509' registered [ 0.224408] bounce: pool size: 64 pages [ 0.224455] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.224622] io scheduler noop registered [ 0.224633] io scheduler deadline registered (default) [ 0.224800] io scheduler cfq registered [ 0.224811] io scheduler mq-deadline registered (default) [ 0.224822] io scheduler kyber registered [ 0.256301] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 0.256319] brcm-pcie fd500000.pcie: could not get clock [ 0.256381] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.256418] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 0.308048] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 0.308332] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.308348] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.308365] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.308409] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.308550] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.311279] PCI: bus0: Fast back to back transfers disabled [ 0.311297] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.311505] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.311629] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.311945] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.314662] PCI: bus1: Fast back to back transfers disabled [ 0.314678] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 0.314725] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.314744] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.314815] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.314832] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.315043] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.315219] pcieport 0000:00:00.0: Signaling PME with IRQ 52 [ 0.315381] pcieport 0000:00:00.0: AER enabled with IRQ 52 [ 0.315546] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.319603] iproc-rng200 fe104000.rng: hwrng registered [ 0.319815] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.320312] vc-sm: Videocore shared memory driver [ 0.320703] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.330882] brd: module loaded [ 0.340578] loop: module loaded [ 0.341331] Loading iSCSI transport class v2.0-870. [ 0.342993] libphy: Fixed MDIO Bus: probed [ 0.343403] bcmgenet fd580000.genet: failed to get enet clock [ 0.343420] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 0.343437] bcmgenet fd580000.genet: failed to get enet-wol clock [ 0.343452] bcmgenet fd580000.genet: failed to get enet-eee clock [ 0.343475] bcmgenet: Skipping UMAC reset [ 0.343719] unimac-mdio unimac-mdio.-19: DMA mask not set [ 0.358050] libphy: bcmgenet MII bus: probed [ 0.398545] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 0.399454] usbcore: registered new interface driver r8152 [ 0.399516] usbcore: registered new interface driver lan78xx [ 0.399574] usbcore: registered new interface driver smsc95xx [ 0.399881] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.399910] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.402118] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 0.402426] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 53 [ 0.403254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.403268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.403281] usb usb1: Product: xHCI Host Controller [ 0.403292] usb usb1: Manufacturer: Linux 4.19.118-v7l+ xhci-hcd [ 0.403303] usb usb1: SerialNumber: 0000:01:00.0 [ 0.403826] hub 1-0:1.0: USB hub found [ 0.403906] hub 1-0:1.0: 1 port detected [ 0.404376] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.404397] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.404416] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.404822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 0.404835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.404847] usb usb2: Product: xHCI Host Controller [ 0.404858] usb usb2: Manufacturer: Linux 4.19.118-v7l+ xhci-hcd [ 0.404869] usb usb2: SerialNumber: 0000:01:00.0 [ 0.405349] hub 2-0:1.0: USB hub found [ 0.405421] hub 2-0:1.0: 4 ports detected [ 0.406609] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.406793] dwc_otg: FIQ enabled [ 0.406802] dwc_otg: NAK holdoff enabled [ 0.406811] dwc_otg: FIQ split-transaction FSM enabled [ 0.406823] Module dwc_common_port init [ 0.407027] usbcore: registered new interface driver uas [ 0.407128] usbcore: registered new interface driver usb-storage [ 0.407307] mousedev: PS/2 mouse device common for all mice [ 0.408496] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.410116] sdhci: Secure Digital Host Controller Interface driver [ 0.410125] sdhci: Copyright(c) Pierre Ossman [ 0.410535] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.410935] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.413950] ledtrig-cpu: registered to indicate activity on CPUs [ 0.414094] hidraw: raw HID events driver (C) Jiri Kosina [ 0.414219] usbcore: registered new interface driver usbhid [ 0.414227] usbhid: USB HID core driver [ 0.414992] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.416754] [vc_sm_connected_init]: start [ 0.426077] [vc_sm_connected_init]: end - returning 0 [ 0.427178] Initializing XFRM netlink socket [ 0.427205] NET: Registered protocol family 17 [ 0.427303] Key type dns_resolver registered [ 0.427770] Registering SWP/SWPB emulation handler [ 0.428386] registered taskstats version 1 [ 0.428404] Loading compiled-in X.509 certificates [ 0.435357] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.435419] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 0.440553] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.441079] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 0.441723] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.441735] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 0.467776] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3 [ 0.467866] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4 [ 0.487104] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.488696] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.490287] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.493150] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.494739] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.503951] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 0.506415] of_cfs_init [ 0.506500] of_cfs_init: OK [ 0.507091] Waiting for root device PARTUUID=ea7d04d6-02... [ 0.550160] random: fast init done [ 0.562611] mmc1: new high speed SDIO card at address 0001 [ 0.610212] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 0.611339] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 0.613985] mmcblk0: p1 p2 [ 0.626125] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 0.626167] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 0.626973] devtmpfs: mounted [ 0.634326] Freeing unused kernel memory: 2048K [ 0.668268] Run /sbin/init as init process [ 0.768064] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.950708] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 0.950722] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 0.950734] usb 1-1: Product: USB2.0 Hub [ 0.952619] hub 1-1:1.0: USB hub found [ 0.952945] hub 1-1:1.0: 4 ports detected [ 1.093979] systemd[1]: System time before build time, advancing clock.[ 1.184284] NET: Registered protocol family 10 [ 1.185515] Segment Routing with IPv6 [ 1.216342] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.217015] systemd[1]: Detected architecture arm. [ 1.225590] systemd[1]: Set hostname to <raspberrypi4-iobroker>. [ 1.278093] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd[ 1.423923] usb 1-1.2: New USB device found, idVendor=046a, idProduct=0001, bcdDevice= 1.00 [ 1.423940] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.445181] input: HID 046a:0001 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046A:0001.0001/input/input0 [ 1.508582] hid-generic 0003:046A:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0001] on usb-0000:01:00.0-1.2/input0 [ 1.618095] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd [ 1.787130] usb 1-1.4: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09 [ 1.787145] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.787158] usb 1-1.4: Product: TI CC2531 USB CDC [ 1.787169] usb 1-1.4: Manufacturer: Texas Instruments [ 1.787180] usb 1-1.4: SerialNumber: __0X00124B001936DBFD [ 1.932293] random: systemd: uninitialized urandom read (16 bytes read)[ 1.940932] random: systemd: uninitialized urandom read (16 bytes read)[ 1.941007] systemd[1]: Reached target Swap. [ 1.941389] random: systemd: uninitialized urandom read (16 bytes read)[ 1.941988] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.942413] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.942752] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 1.943328] systemd[1]: Listening on udev Control Socket. [ 1.947482] systemd[1]: Created slice User and Session Slice. [ 1.947956] systemd[1]: Listening on udev Kernel Socket. [ 2.033929] i2c /dev entries driver [ 2.571227] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.663276] systemd-journald[120]: Received request to flush runtime journal from PID 1 [ 2.778075] usb 1-1.3: new low-speed USB device number 5 using xhci_hcd[ 2.917126] usb 1-1.3: New USB device found, idVendor=1d57, idProduct=2400, bcdDevice= 0.21 [ 2.917144] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.917157] usb 1-1.3: Product: HID compliant-mouse [ 2.917169] usb 1-1.3: Manufacturer: HID compliant-mouse [ 2.926538] input: HID compliant-mouse HID compliant-mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1D57:2400.0002/input/input1 [ 2.926902] hid-generic 0003:1D57:2400.0002: input,hidraw1: USB HID v1.10 Mouse [HID compliant-mouse HID compliant-mouse] on usb-0000:01:00.0-1.3/input0 [ 3.274645] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.276646] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.276662] [vc_sm_connected_init]: start [ 3.286151] [vc_sm_connected_init]: installed successfully [ 3.310140] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff [ 3.317149] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff [ 3.322760] media: Linux media interface: v0.10 [ 3.323455] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff [ 3.324514] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff [ 3.382688] videodev: Linux video capture interface: v2.00 [ 3.417593] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.417800] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.444660] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.467180] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.484947] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.484996] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.494052] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.494086] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.500203] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.500242] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.633738] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.668199] bcm2835_audio soc:audio: card created with 4 channels [ 3.706191] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.717495] bcm2835_audio soc:audio: card created with 4 channels [ 3.779642] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 3.790513] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.828981] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 3.828999] checking generic (3e8f6000 2d1800) vs hw (0 ffffffffffffffff) [ 3.829010] fb: switching to vc4drmfb from simple [ 3.829240] Console: switching to colour dummy device 80x30 [ 3.830219] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1[ 3.830231] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 3.830241] [drm] No driver support for vblank timestamp query. [ 3.830250] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 3.869091] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 3.881123] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 3.881766] usbcore: registered new interface driver brcmfmac [ 3.891706] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [ 3.893346] usbcore: registered new interface driver cdc_acm [ 3.893357] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.996405] vc4-drm soc:gpu: HDMI-A-1: EDID is invalid: [ 3.996422] [00] BAD 00 ff ff ff ff ff ff 00 36 83 01 0b e9 03 00 00 [ 3.996433] [00] BAD 01 12 01 03 80 46 27 78 0a 19 90 a7 55 46 98 24 [ 3.996442] [00] BAD 00 49 4b 01 08 00 01 01 01 01 01 01 01 01 01 01 [ 3.996451] [00] BAD 01 01 01 01 01 01 01 1d 00 72 51 d0 1e 20 6e 28 [ 3.996461] [00] BAD 55 00 c4 8e 21 00 00 1e 01 1d 80 18 71 1c 16 20 [ 3.996470] [00] BAD 58 2c 25 00 c4 8e 21 00 00 9e 00 00 00 fc 00 4d [ 3.996479] [00] BAD 54 43 32 36 54 34 32 0a 20 20 20 20 00 00 00 fd [ 3.996488] [00] BAD 00 16 50 0e 5b 10 00 0a 20 20 20 20 20 20 01 9a [ 4.001790] Console: switching to colour frame buffer device 160x45 [ 4.001827] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device [ 4.149022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.163047] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2 [ 6.177856] uart-pl011 fe201000.serial: no DMA platform data [ 6.237641] random: crng init done [ 6.237658] random: 7 urandom warning(s) missed due to ratelimiting [ 6.331301] 8021q: 802.1Q VLAN Support v1.8 [ 6.583853] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 6.732647] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.732744] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled[ 7.080764] bcmgenet: Skipping UMAC reset [ 7.178758] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 7.179088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.248117] bcmgenet fd580000.genet eth0: Link is Down [ 12.408220] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.408244] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.846002] Bluetooth: Core ver 2.22 [ 12.846073] NET: Registered protocol family 31 [ 12.846079] Bluetooth: HCI device and connection manager initialized [ 12.847863] Bluetooth: HCI socket layer initialized [ 12.847875] Bluetooth: L2CAP socket layer initialized [ 12.847918] Bluetooth: SCO socket layer initialized [ 12.864092] Bluetooth: HCI UART driver ver 2.3 [ 12.864101] Bluetooth: HCI UART protocol H4 registered [ 12.864155] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.864327] Bluetooth: HCI UART protocol Broadcom registered [ 14.421598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.421615] Bluetooth: BNEP filters: protocol multicast [ 14.421645] Bluetooth: BNEP socket layer initialized [ 14.486666] Bluetooth: RFCOMM TTY layer initialized [ 14.486687] Bluetooth: RFCOMM socket layer initialized -
@Danny-Köhn installiere iot mal neu
-
@apollon77 ist dann das gleiche Problem
-
code_ host.raspberrypi4-iobroker 2020-06-28 00:34:31.386 info Restart adapter system.adapter.iot.0 because enabled host.raspberrypi4-iobroker 2020-06-28 00:34:31.385 error instance system.adapter.iot.0 terminated with code 1 (JS_CONTROLLER_STOPPED) host.raspberrypi4-iobroker 2020-06-28 00:34:31.384 error Caught by controller[0]: } host.raspberrypi4-iobroker 2020-06-28 00:34:31.383 error Caught by controller[0]: requireStack: [ '/opt/iobroker/node_modules/iobroker.iot/main.js' ] host.raspberrypi4-iobroker 2020-06-28 00:34:31.383 error Caught by controller[0]: code: 'MODULE_NOT_FOUND', host.raspberrypi4-iobroker 2020-06-28 00:34:31.382 error Caught by controller[0]: at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12) { host.raspberrypi4-iobroker 2020-06-28 00:34:31.382 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:879:14) host.raspberrypi4-iobroker 2020-06-28 00:34:31.381 error Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:986:32) host.raspberrypi4-iobroker 2020-06-28 00:34:31.381 error Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1158:10) host.raspberrypi4-iobroker 2020-06-28 00:34:31.380 error Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1138:30) host.raspberrypi4-iobroker 2020-06-28 00:34:31.380 error Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.iot/main.js:6:22) host.raspberrypi4-iobroker 2020-06-28 00:34:31.379 error Caught by controller[0]: at require (internal/modules/cjs/helpers.js:72:18) host.raspberrypi4-iobroker 2020-06-28 00:34:31.378 error Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:1026:19) host.raspberrypi4-iobroker 2020-06-28 00:34:31.378 error Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:842:27) host.raspberrypi4-iobroker 2020-06-28 00:34:31.377 error Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:966:15) host.raspberrypi4-iobroker 2020-06-28 00:34:31.377 error Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.iot/main.js host.raspberrypi4-iobroker 2020-06-28 00:34:31.376 error Caught by controller[0]: Require stack: host.raspberrypi4-iobroker 2020-06-28 00:34:31.375 error Caught by controller[0]: Error: Cannot find module 'aws-iot-device-sdk' host.raspberrypi4-iobroker 2020-06-28 00:34:31.375 error Caught by controller[0]: ^ host.raspberrypi4-iobroker 2020-06-28 00:34:31.374 error Caught by controller[0]: throw err; host.raspberrypi4-iobroker 2020-06-28 00:34:31.373 error Caught by controller[0]: internal/modules/cjs/loader.js:969 host.raspberrypi4-iobroker 2020-06-28 00:34:31.144 info instance system.adapter.iot.0 started with pid 6525 host.raspberrypi4-iobroker 2020-06-28 00:34:31.068 info "system.adapter.iot.0" enabled -
mount | grep ^/dev -
root@raspberrypi4-iobroker:~# mount | grep ^/dev /dev/mmcblk0p2 on / type ext4 (rw,noatime) /dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) root@raspberrypi4-iobroker:~# -
@Danny-Köhn Och, root-shell. Dann bin ich raus. Viel Erfolg noch.
-
@Thomas-Braun ist das ein Problem bin leider nicht so bewandert bei linux.
-
@Danny-Köhn Ja, gerade DANN ist es ein Problem.
Debian/Raspbian wird nicht per root login, sonder per 'sudo' administriert. -
@Thomas-Braun bin über SSH als Root User eingeloggt
-
@Danny-Köhn Und das ist Quark.
Log dich mit dem Standard-User, vermutlich 'pi' ein. -
Schon geschehen
-
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs -
code_text /usr/bin/nodejs v12.18.1 /usr/local/bin/node v12.18.1 /usr/local/bin/npm 6.14.5 nodejs: Installiert: 12.18.1-1nodesource1 Installationskandidat: 12.18.1-1nodesource1 Versionstabelle: *** 12.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.21.0~dfsg-1~deb10u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi@raspberrypi4-iobroker:~ $ -
@Danny-Köhn Auch mal wieder ein Klassiker.
node ist falsch installiert.sudo rm /usr/local/bin/node sudo rm /usr/local/bin/npm sudo apt update sudo apt dist-upgrade sudo apt install nodejs --reinstall sudo reboot -
Nach dieser Operation werden 38,9 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] J Abbruch. pi@raspberrypi4-iobroker:~ $Bei Ja macht er trotzdem einen Abbruch
-
@Danny-Köhn Kompletten input wie auch output zeigen.
sudo apt update sudo apt upgrade -
Mit den Befehlen ging es.
code_text pi@raspberrypi4-iobroker:~ $ sudo apt update OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_12.x buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 3 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. pi@raspberrypi4-iobroker:~ $ sudo apt upgrade Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: gyp libc-ares2 libjs-inherits libjs-is-typedarray libmicrodns0 libssl-dev libuv1 libuv1-dev node-abbrev node-ajv node-ansi node-ansi-align node-ansi-regex node-ansi-styles node-ansistyles node-aproba node-archy node-are-we-there-yet node-asn1 node-assert-plus node-asynckit node-aws-sign2 node-aws4 node-balanced-match node-bcrypt-pbkdf node-bluebird node-boxen node-brace-expansion node-builtin-modules node-builtins node-cacache node-call-limit node-camelcase node-caseless node-chalk node-chownr node-cli-boxes node-cliui node-clone node-co node-color-convert node-color-name node-combined-stream node-concat-map node-concat-stream node-config-chain node-console-control-strings node-copy-concurrently node-core-util-is node-cross-spawn node-cyclist node-dashdash node-decamelize node-decompress-response node-deep-extend node-defaults node-delayed-stream node-delegates node-detect-indent node-detect-newline node-duplexer3 node-duplexify node-ecc-jsbn node-editor node-encoding node-end-of-stream node-errno node-escape-string-regexp node-execa node-extend node-extsprintf node-find-up node-flush-write-stream node-forever-agent node-form-data node-from2 node-fs-vacuum node-fs-write-stream-atomic node-fs.realpath node-gauge node-get-caller-file node-get-stream node-getpass node-glob node-got node-graceful-fs node-har-schema node-har-validator node-has-flag node-has-symbol-support-x node-has-to-string-tag-x node-has-unicode node-hosted-git-info node-http-signature node-iconv-lite node-iferr node-import-lazy node-imurmurhash node-inflight node-inherits node-ini node-invert-kv node-is-builtin-module node-is-npm node-is-object node-is-plain-obj node-is-retry-allowed node-is-stream node-is-typedarray node-isarray node-isexe node-isstream node-isurl node-jsbn node-json-parse-better-errors node-json-schema node-json-stable-stringify node-json-stringify-safe node-jsonify node-jsonparse node-jsonstream node-jsprim node-latest-version node-lazy-property node-lcid node-libnpx node-locate-path node-lockfile node-lowercase-keys node-lru-cache node-mem node-mime-types node-mimic-fn node-mimic-response node-minimatch node-minimist node-mississippi node-mkdirp node-move-concurrently node-mute-stream node-node-uuid node-nopt node-normalize-package-data node-npm-package-arg node-npm-run-path node-npmlog node-oauth-sign node-object-assign node-once node-opener node-os-locale node-osenv node-p-cancelable node-p-finally node-p-limit node-p-locate node-p-timeout node-package-json node-parallel-transform node-path-exists node-path-is-absolute node-path-is-inside node-performance-now node-prepend-http node-process-nextick-args node-promise-inflight node-promzard node-proto-list node-prr node-pump node-pumpify node-punycode node-qs node-qw node-rc node-read node-read-package-json node-readable-stream node-registry-auth-token node-registry-url node-request node-require-directory node-require-main-filename node-resolve-from node-retry node-rimraf node-run-queue node-safe-buffer node-semver node-semver-diff node-set-blocking node-sha node-shebang-command node-shebang-regex node-signal-exit node-slash node-slide node-sorted-object node-spdx-correct node-spdx-expression-parse node-spdx-license-ids node-sshpk node-ssri node-stream-each node-stream-iterate node-stream-shift node-string-decoder node-string-width node-strip-ansi node-strip-eof node-strip-json-comments node-supports-color node-tar node-term-size node-text-table node-through node-through2 node-timed-out node-tough-cookie node-tunnel-agent node-tweetnacl node-typedarray node-uid-number node-unique-filename node-unpipe node-url-parse-lax node-url-to-options node-util-deprecate node-uuid node-validate-npm-package-license node-validate-npm-package-name node-verror node-wcwidth.js node-which node-which-module node-wide-align node-widest-line node-wrap-ansi node-wrappy node-write-file-atomic node-xdg-basedir node-xtend node-y18n node-yallist node-yargs node-yargs-parser nodejs-doc rpi-eeprom-images Verwenden Sie »sudo apt autoremove«, um sie zu entfernen. Die folgenden NEUEN Pakete werden installiert: agnostics fio ibverbs-providers libaio1 libboost-atomic1.67.0 libboost-iostreams1.67.0 libboost-regex1.67.0 libboost-system1.67.0 libboost-thread1.67.0 libgfapi0 libgfrpc0 libgfxdr0 libglusterfs0 libibverbs1 libnuma1 librados2 librbd1 librdmacm1 lxplug-magnifier rp-bookshelf rpi.gpio-common Die folgenden Pakete werden aktualisiert (Upgrade): python-rpi.gpio python3-rpi.gpio raspberrypi-ui-mods 3 aktualisiert, 21 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 15,8 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 38,9 MB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 http://archive.raspberrypi.org/debian buster/main armhf agnostics armhf 0.4 [10,6 kB] Holen:2 http://archive.raspberrypi.org/debian buster/main armhf lxplug-magnifier armhf 0.2 [6.280 B] Holen:3 http://archive.raspberrypi.org/debian buster/main armhf rpi.gpio-common armhf 0.7.0-0.1~bpo10+1 [5.776 B] Holen:4 http://archive.raspberrypi.org/debian buster/main armhf python-rpi.gpio armhf 0.7.0-0.1~bpo10+1 [20,8 kB] Holen:5 http://archive.raspberrypi.org/debian buster/main armhf python3-rpi.gpio armhf 0.7.0-0.1~bpo10+1 [20,7 kB] python-rpi.gpio (0.7.0-0.1~bpo10+1) wird eingerichtet ... libboost-system1.67.0:armhf (1.67.0-13+deb10u1) wird eingerichtet ... libaio1:armhf (0.3.112-3) wird eingerichtet ... libgfxdr0:armhf (5.5-3) wird eingerichtet ... librdmacm1:armhf (22.1-1) wird eingerichtet ... libboost-thread1.67.0:armhf (1.67.0-13+deb10u1) wird eingerichtet ... libgfrpc0:armhf (5.5-3) wird eingerichtet ... librados2:armhf (12.2.11+dfsg1-2.1+rpi1) wird eingerichtet ... librbd1:armhf (12.2.11+dfsg1-2.1+rpi1) wird eingerichtet ... libgfapi0:armhf (5.5-3) wird eingerichtet ... fio (3.12-2) wird eingerichtet ... agnostics (0.4) wird eingerichtet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... Trigger für shared-mime-info (1.10-1) werden verarbeitet ... Trigger für desktop-file-utils (0.23-4) werden verarbeitet ... Trigger für mime-support (3.62) werden verarbeitet ... Trigger für hicolor-icon-theme (0.17-2) werden verarbeitet ... Trigger für gnome-menus (3.31.4-3) werden verarbeitet ... Trigger für libc-bin (2.28-10+rpi1) werden verarbeitet ... Trigger für systemd (241-7~deb10u4+rpi1) werden verarbeitet ... pi@raspberrypi4-iobroker:~ $
