Test Adapter shuttercontrol v1.7.x
-
@weiserwolf Sind die Rollläden um 9:48 Uhr in den Sonnenschutz gefahren?
-
@simatec ja so ca. Habe nicht genau auf die Uhe geschaut.
-
@simatec sagte in Test Adapter shuttercontrol v1.4.x:
Hier wäre wirklich ein Debuglog von dem morgentlichen Fahren wichtig.
Etz hab ich ein Debuglog und da seh ich auch den Manu Mode aber ich verstehe nicht warum, weil ich über openAll geöffnet habe. Aktuell sind 6 von 11 Rollos im Manu und das versteh ich nicht.
Zeile 1082: 2023-04-16 07:02:21.887 - debug: shuttercontrol.0 (1043851) start buttonAction Zeile 1083: 2023-04-16 07:02:21.892 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Kinderzimmer.ShutterControl.level value: 0% Zeile 1084: 2023-04-16 07:02:21.947 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1085: 2023-04-16 07:02:21.957 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1086: 2023-04-16 07:02:22.016 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Kinderzimmer.ShutterControl.level old value = 72 new value = 0 Zeile 1087: 2023-04-16 07:02:22.016 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Kinderzimmer.ShutterControl.level Zeile 1088: 2023-04-16 07:02:22.016 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1089: 2023-04-16 07:02:22.016 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1090: 2023-04-16 07:02:22.016 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1091: 2023-04-16 07:02:22.017 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1092: 2023-04-16 07:02:22.017 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 72 % Zeile 1093: 2023-04-16 07:02:22.017 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1094: 2023-04-16 07:02:22.017 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1095: 2023-04-16 07:02:22.072 - debug: shuttercontrol.0 (1043851) Rollo Kinderzimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1096: 2023-04-16 07:02:22.072 - debug: shuttercontrol.0 (1043851) Rollo Kinderzimmer.ShutterControl.level drived manually to 0. Old value = 72. New value = 0 Zeile 1097: 2023-04-16 07:02:22.120 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Kinderzimmer.ShutterControl.level old height: 72% new height: 0% Zeile 1100: 2023-04-16 07:02:24.129 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Schlafzimmer.ShutterControl.level already up at: 0% - setting current action: up Zeile 1105: 2023-04-16 07:02:26.132 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Badezimmer.ShutterControl.level value: 0% Zeile 1106: 2023-04-16 07:02:26.181 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1107: 2023-04-16 07:02:26.191 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1108: 2023-04-16 07:02:26.285 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Badezimmer.ShutterControl.level old height: 0% new height: 0% Zeile 1109: 2023-04-16 07:02:28.286 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rolllo Treppenhaus OG.ShutterControl.level value: 0% Zeile 1110: 2023-04-16 07:02:28.337 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1111: 2023-04-16 07:02:28.347 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1112: 2023-04-16 07:02:28.444 - debug: shuttercontrol.0 (1043851) shutterUpButton Rolllo Treppenhaus OG.ShutterControl.level old height: 0% new height: 0% Zeile 1113: 2023-04-16 07:02:30.445 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Büro Steffi.ShutterControl.level value: 0% Zeile 1114: 2023-04-16 07:02:30.493 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1115: 2023-04-16 07:02:30.503 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1116: 2023-04-16 07:02:30.570 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Büro Steffi.ShutterControl.level old value = 73 new value = 0 Zeile 1117: 2023-04-16 07:02:30.570 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Büro Steffi.ShutterControl.level Zeile 1118: 2023-04-16 07:02:30.570 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1119: 2023-04-16 07:02:30.570 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1120: 2023-04-16 07:02:30.570 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1121: 2023-04-16 07:02:30.571 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1122: 2023-04-16 07:02:30.571 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 73 % Zeile 1123: 2023-04-16 07:02:30.571 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1124: 2023-04-16 07:02:30.571 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1125: 2023-04-16 07:02:30.623 - debug: shuttercontrol.0 (1043851) Rollo Büro Steffi.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1126: 2023-04-16 07:02:30.624 - debug: shuttercontrol.0 (1043851) Rollo Büro Steffi.ShutterControl.level drived manually to 0. Old value = 73. New value = 0 Zeile 1127: 2023-04-16 07:02:30.672 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Büro Steffi.ShutterControl.level old height: 73% new height: 0% Zeile 1128: 2023-04-16 07:02:32.674 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Büro Mike.ShutterControl.level value: 0% Zeile 1129: 2023-04-16 07:02:32.734 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1130: 2023-04-16 07:02:32.744 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1131: 2023-04-16 07:02:32.815 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Büro Mike.ShutterControl.level old value = 68 new value = 0 Zeile 1132: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Büro Mike.ShutterControl.level Zeile 1133: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1134: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1135: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1136: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1137: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 68 % Zeile 1138: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1139: 2023-04-16 07:02:32.816 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1140: 2023-04-16 07:02:32.867 - debug: shuttercontrol.0 (1043851) Rollo Büro Mike.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1141: 2023-04-16 07:02:32.867 - debug: shuttercontrol.0 (1043851) Rollo Büro Mike.ShutterControl.level drived manually to 0. Old value = 68. New value = 0 Zeile 1142: 2023-04-16 07:02:32.916 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Büro Mike.ShutterControl.level old height: 68% new height: 0% Zeile 1143: 2023-04-16 07:02:33.999 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.04cf8cdf3c7b35d1.illuminance Value: 7 Zeile 1144: 2023-04-16 07:02:34.947 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Wohnzimmer.ShutterControl.level value: 0% Zeile 1145: 2023-04-16 07:02:34.997 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1146: 2023-04-16 07:02:35.007 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1147: 2023-04-16 07:02:35.100 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Wohnzimmer.ShutterControl.level old height: 0% new height: 0% Zeile 1148: 2023-04-16 07:02:35.191 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef4410001ff7de.illuminance Value: 13 Zeile 1149: 2023-04-16 07:02:37.101 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Esszimmer.ShutterControl.level value: 0% Zeile 1150: 2023-04-16 07:02:37.159 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1151: 2023-04-16 07:02:37.170 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1152: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Esszimmer.ShutterControl.level old value = 74 new value = 0 Zeile 1153: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Esszimmer.ShutterControl.level Zeile 1154: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1155: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1156: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1157: 2023-04-16 07:02:37.208 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1158: 2023-04-16 07:02:37.209 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 74 % Zeile 1159: 2023-04-16 07:02:37.209 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1160: 2023-04-16 07:02:37.209 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1161: 2023-04-16 07:02:37.269 - debug: shuttercontrol.0 (1043851) Rollo Esszimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1162: 2023-04-16 07:02:37.269 - debug: shuttercontrol.0 (1043851) Rollo Esszimmer.ShutterControl.level drived manually to 0. Old value = 74. New value = 0 Zeile 1163: 2023-04-16 07:02:37.316 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Esszimmer.ShutterControl.level old height: 74% new height: 0% Zeile 1164: 2023-04-16 07:02:37.641 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef4410001ffb25.illuminance Value: 3 Zeile 1165: 2023-04-16 07:02:39.321 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rolllo Treppenhaus EG.ShutterControl.level value: 0% Zeile 1166: 2023-04-16 07:02:39.368 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1167: 2023-04-16 07:02:39.379 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1168: 2023-04-16 07:02:39.472 - debug: shuttercontrol.0 (1043851) shutterUpButton Rolllo Treppenhaus EG.ShutterControl.level old height: 0% new height: 0% Zeile 1169: 2023-04-16 07:02:41.474 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Küchenfenster.ShutterControl.level value: 0% Zeile 1170: 2023-04-16 07:02:41.524 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1171: 2023-04-16 07:02:41.535 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1172: 2023-04-16 07:02:41.587 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Küchenfenster.ShutterControl.level old value = 85 new value = 0 Zeile 1173: 2023-04-16 07:02:41.587 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Küchenfenster.ShutterControl.level Zeile 1174: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1175: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1176: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1177: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1178: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 85 % Zeile 1179: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1180: 2023-04-16 07:02:41.588 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1181: 2023-04-16 07:02:41.639 - debug: shuttercontrol.0 (1043851) Rollo Küchenfenster.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1182: 2023-04-16 07:02:41.639 - debug: shuttercontrol.0 (1043851) Rollo Küchenfenster.ShutterControl.level drived manually to 0. Old value = 85. New value = 0 Zeile 1183: 2023-04-16 07:02:41.688 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Küchenfenster.ShutterControl.level old height: 85% new height: 0% Zeile 1184: 2023-04-16 07:02:43.690 - info: shuttercontrol.0 (1043851) Button openAll Set ID: Rollo Terrassentür.ShutterControl.level value: 0% Zeile 1185: 2023-04-16 07:02:43.740 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check started Zeile 1186: 2023-04-16 07:02:43.751 - debug: shuttercontrol.0 (1043851) #0 wait for shutter check end Zeile 1187: 2023-04-16 07:02:43.758 - debug: shuttercontrol.0 (1043851) Shutter state changed: Rollo Terrassentür.ShutterControl.level old value = 94 new value = 0 Zeile 1188: 2023-04-16 07:02:43.758 - debug: shuttercontrol.0 (1043851) #2 shutterName: Rollo Terrassentür.ShutterControl.level Zeile 1189: 2023-04-16 07:02:43.758 - debug: shuttercontrol.0 (1043851) #2 shutterState: 0 % Zeile 1190: 2023-04-16 07:02:43.758 - debug: shuttercontrol.0 (1043851) #2 currentAction: Manu_Mode Zeile 1191: 2023-04-16 07:02:43.758 - debug: shuttercontrol.0 (1043851) #2 triggerAction: Manu_Mode Zeile 1192: 2023-04-16 07:02:43.759 - debug: shuttercontrol.0 (1043851) #2 currentHeight: 0 % Zeile 1193: 2023-04-16 07:02:43.759 - debug: shuttercontrol.0 (1043851) #2 oldHeight: 94 % Zeile 1194: 2023-04-16 07:02:43.759 - debug: shuttercontrol.0 (1043851) #2 currentShutterState: disabled Zeile 1195: 2023-04-16 07:02:43.759 - debug: shuttercontrol.0 (1043851) #2 currentShutterStateTime: 60 seconds Zeile 1196: 2023-04-16 07:02:43.777 - debug: shuttercontrol.0 (1043851) Rollo Terrassentür.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close Zeile 1197: 2023-04-16 07:02:43.777 - debug: shuttercontrol.0 (1043851) Rollo Terrassentür.ShutterControl.level drived manually to 0. Old value = 94. New value = 0 Zeile 1198: 2023-04-16 07:02:43.781 - debug: shuttercontrol.0 (1043851) shutterUpButton Rollo Terrassentür.ShutterControl.level old height: 94% new height: 0% Zeile 1199: 2023-04-16 07:02:45.497 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef441000018d23.illuminance Value: 10 Zeile 1200: 2023-04-16 07:02:45.621 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef4410000199f5.illuminance Value: 21 Zeile 1201: 2023-04-16 07:02:45.782 - debug: shuttercontrol.0 (1043851) Shuttercontrol save all shutter states Zeile 1202: 2023-04-16 07:02:47.159 - debug: shuttercontrol.0 (1043851) insidetemperature changed: shelly.1.SHMOS-02#8CF68108AA4B#1.sensor.temperatureC Value: 21.2 Zeile 1203: 2023-04-16 07:02:53.376 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef4410002000c5.illuminance Value: 151 Zeile 1204: 2023-04-16 07:02:54.687 - debug: shuttercontrol.0 (1043851) Lightsensor changed: zigbee.0.54ef441000019dc2.illuminance Value: 0
-
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
Sind die gleichen Bosch Aktoren
die Bosch Aktoren sind baugleich mit Homematic.
Letztere benötigen die position später bestimmen.warum du bisher
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
Bei Position erst später bestimmen ... noch nie was eingestellt.
hast, weiß ich nicht.
Mach das doch mal!
Etwas nehr als die längste Laufzeit eines Rolladens -
@homoran Hab's mal auf 35s gestellt, laut der Bosch App fährt mein längster Rollo 31s.
Mich wundert halt, dass es über ein Jahr problemlos funktioniert hat. -
Irgendwas ist da wirklich seltsam.
Heute früh habe ich alle Rollos bis auf den im Schlafzimmer manuell geöffnet. Später habe ich dann openAll gedrückt um auch das Schlafzimmer zu öffnen und alle wieder auf Auto zu bekommen. Alle die ich manuell geöffnet hatte wurden so auf Auto gestellt. Der im Schlafzimmer, der definitiv nicht manuell geöffnet wurde, stand auf manuell.
Wie schon geschrieben, dieses Verhalten gab es letztes Jahr definitiv nicht und ich habe an meinem Setup absolut nichts geändert. -
@firebowl Ohne Debuglog ist das Glaskugel schauen...
Bitte immer den debuglog von den Vorgängen posten -
@simatec Mach ich noch aber gestern hatte ich eines gepostet.
-
@firebowl Jup, aber nicht von der Fahrt heute
-
@simatec
Hast du dir schon meine Debug-Logs angeschaut? Ich schalte keine Aktoren und setze im Test-System einen Datenpunkt. Da greift kein weiterer Prozess zu, auch kein weiteres Script. Ich logge die Werte nur mit dem history-Adapter, um die "Fahrzeiten" verfolgen zu können. Trotzdem schaltet Shuttercontrol immer auch manu_mode.
Das kann nur am Adapter liegen. In der 1.4.18 funktiniert der Adapter ohne Probleme. -
@simatec sagte in Test Adapter shuttercontrol v1.4.x:
@firebowl Jup, aber nicht von der Fahrt heute
Jetzt hab ich ein Debuglog.
Ich habe alle Rollos über closeAll geschlossen, kurz gewartet und dann über openAll geöffnet.
Ergebnis: Alle Rollos stehen im Manu2023-04-17 10:35:04.430 - info: shuttercontrol.0 (1189956) Loglevel changed from "info" to "debug" 2023-04-17 10:35:37.180 - debug: shuttercontrol.0 (1189956) start buttonAction 2023-04-17 10:35:37.183 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Kinderzimmer.ShutterControl.level value: 72% 2023-04-17 10:35:37.233 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:37.288 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Kinderzimmer.ShutterControl.level old height: 0% new height: 72% 2023-04-17 10:35:39.289 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Schlafzimmer.ShutterControl.level value: 100% 2023-04-17 10:35:39.340 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:39.392 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Schlafzimmer.ShutterControl.level old height: 0% new height: 100% 2023-04-17 10:35:41.397 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Badezimmer.ShutterControl.level value: 74% 2023-04-17 10:35:41.443 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:41.495 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Badezimmer.ShutterControl.level old height: 0% new height: 74% 2023-04-17 10:35:43.514 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rolllo Treppenhaus OG.ShutterControl.level value: 69% 2023-04-17 10:35:43.564 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:43.615 - debug: shuttercontrol.0 (1189956) shutterDownButton Rolllo Treppenhaus OG.ShutterControl.level old height: 0% new height: 69% 2023-04-17 10:35:44.205 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.04cf8cdf3c7b5a7e.illuminance Value: 644 2023-04-17 10:35:45.622 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Büro Steffi.ShutterControl.level value: 73% 2023-04-17 10:35:45.691 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:45.750 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Büro Steffi.ShutterControl.level old height: 0% new height: 73% 2023-04-17 10:35:47.751 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Büro Mike.ShutterControl.level value: 68% 2023-04-17 10:35:47.800 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:47.850 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Büro Mike.ShutterControl.level old height: 0% new height: 68% 2023-04-17 10:35:49.853 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Wohnzimmer.ShutterControl.level value: 69% 2023-04-17 10:35:49.900 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:49.950 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Wohnzimmer.ShutterControl.level old height: 0% new height: 69% 2023-04-17 10:35:51.953 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Esszimmer.ShutterControl.level value: 74% 2023-04-17 10:35:52.001 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:52.050 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Esszimmer.ShutterControl.level old height: 0% new height: 74% 2023-04-17 10:35:54.052 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rolllo Treppenhaus EG.ShutterControl.level value: 66% 2023-04-17 10:35:54.100 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:54.150 - debug: shuttercontrol.0 (1189956) shutterDownButton Rolllo Treppenhaus EG.ShutterControl.level old height: 0% new height: 66% 2023-04-17 10:35:56.227 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Küchenfenster.ShutterControl.level value: 85% 2023-04-17 10:35:56.309 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:56.362 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Küchenfenster.ShutterControl.level old height: 85% new height: 85% 2023-04-17 10:35:58.369 - info: shuttercontrol.0 (1189956) Button closeAll Set ID: Rollo Terrassentür.ShutterControl.level value: 94% 2023-04-17 10:35:58.416 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:35:58.466 - debug: shuttercontrol.0 (1189956) shutterDownButton Rollo Terrassentür.ShutterControl.level old height: 0% new height: 94% 2023-04-17 10:35:59.651 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef4410000199f5.illuminance Value: 331 2023-04-17 10:36:00.467 - debug: shuttercontrol.0 (1189956) Shuttercontrol save all shutter states 2023-04-17 10:36:12.234 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:12.237 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Kinderzimmer.ShutterControl.level old value = 0 new value = 72 2023-04-17 10:36:12.237 - debug: shuttercontrol.0 (1189956) Rollo Kinderzimmer.ShutterControl.level Old value = 0. New value = 72. automatic is active 2023-04-17 10:36:14.341 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:14.344 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Schlafzimmer.ShutterControl.level old value = 0 new value = 100 2023-04-17 10:36:14.344 - debug: shuttercontrol.0 (1189956) Rollo Schlafzimmer.ShutterControl.level Old value = 0. New value = 100. automatic is active 2023-04-17 10:36:16.444 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:16.447 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Badezimmer.ShutterControl.level old value = 0 new value = 74 2023-04-17 10:36:16.447 - debug: shuttercontrol.0 (1189956) Rollo Badezimmer.ShutterControl.level Old value = 0. New value = 74. automatic is active 2023-04-17 10:36:18.565 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:18.567 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rolllo Treppenhaus OG.ShutterControl.level old value = 0 new value = 69 2023-04-17 10:36:18.567 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus OG.ShutterControl.level Old value = 0. New value = 69. automatic is active 2023-04-17 10:36:20.692 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:20.695 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Büro Steffi.ShutterControl.level old value = 0 new value = 73 2023-04-17 10:36:20.695 - debug: shuttercontrol.0 (1189956) Rollo Büro Steffi.ShutterControl.level Old value = 0. New value = 73. automatic is active 2023-04-17 10:36:22.801 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:22.832 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Büro Mike.ShutterControl.level old value = 0 new value = 68 2023-04-17 10:36:22.832 - debug: shuttercontrol.0 (1189956) Rollo Büro Mike.ShutterControl.level Old value = 0. New value = 68. automatic is active 2023-04-17 10:36:24.900 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:24.906 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Wohnzimmer.ShutterControl.level old value = 0 new value = 69 2023-04-17 10:36:24.907 - debug: shuttercontrol.0 (1189956) Rollo Wohnzimmer.ShutterControl.level Old value = 0. New value = 69. automatic is active 2023-04-17 10:36:27.001 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:27.004 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Esszimmer.ShutterControl.level old value = 0 new value = 74 2023-04-17 10:36:27.004 - debug: shuttercontrol.0 (1189956) Rollo Esszimmer.ShutterControl.level Old value = 0. New value = 74. automatic is active 2023-04-17 10:36:29.100 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:29.106 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rolllo Treppenhaus EG.ShutterControl.level old value = 0 new value = 66 2023-04-17 10:36:29.106 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus EG.ShutterControl.level Old value = 0. New value = 66. automatic is active 2023-04-17 10:36:31.308 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:31.311 - debug: shuttercontrol.0 (1189956) Rollo Küchenfenster.ShutterControl.level Old value = 85. New value = 85. automatic is active 2023-04-17 10:36:33.417 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:36:33.476 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Terrassentür.ShutterControl.level old value = 0 new value = 94 2023-04-17 10:36:33.476 - debug: shuttercontrol.0 (1189956) Rollo Terrassentür.ShutterControl.level Old value = 0. New value = 94. automatic is active 2023-04-17 10:37:34.000 - info: shelly.1 (1031693) [MQTT] Device with client id "shellyplusht-08b61fce7d14" connected! 2023-04-17 10:37:41.131 - info: shelly.1 (1031693) [MQTT] Client Disconnect: 192.168.178.77 (shellyplusht / shellyplusht-08b61fce7d14 / shellyplusht#08b61fce7d14#1) 2023-04-17 10:37:53.097 - debug: shuttercontrol.0 (1189956) start buttonAction 2023-04-17 10:37:53.175 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Kinderzimmer.ShutterControl.level value: 0% 2023-04-17 10:37:53.250 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:37:53.342 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Kinderzimmer.ShutterControl.level old height: 72% new height: 0% 2023-04-17 10:37:55.344 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Schlafzimmer.ShutterControl.level value: 0% 2023-04-17 10:37:55.392 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:37:55.442 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Schlafzimmer.ShutterControl.level old height: 100% new height: 0% 2023-04-17 10:37:57.444 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Badezimmer.ShutterControl.level value: 0% 2023-04-17 10:37:57.492 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:37:57.542 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Badezimmer.ShutterControl.level old height: 74% new height: 0% 2023-04-17 10:37:58.829 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef441000018d23.illuminance Value: 9 2023-04-17 10:37:59.544 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rolllo Treppenhaus OG.ShutterControl.level value: 0% 2023-04-17 10:37:59.592 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:37:59.642 - debug: shuttercontrol.0 (1189956) shutterUpButton Rolllo Treppenhaus OG.ShutterControl.level old height: 69% new height: 0% 2023-04-17 10:38:01.644 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Büro Steffi.ShutterControl.level value: 0% 2023-04-17 10:38:01.692 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:01.742 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Büro Steffi.ShutterControl.level old height: 73% new height: 0% 2023-04-17 10:38:03.744 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Büro Mike.ShutterControl.level value: 0% 2023-04-17 10:38:03.792 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:03.842 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Büro Mike.ShutterControl.level old height: 68% new height: 0% 2023-04-17 10:38:05.047 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef4410000199d2.illuminance Value: 3 2023-04-17 10:38:05.238 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.04cf8cdf3c7b35d1.illuminance Value: 38 2023-04-17 10:38:05.843 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Wohnzimmer.ShutterControl.level value: 0% 2023-04-17 10:38:05.892 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:05.944 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Wohnzimmer.ShutterControl.level old height: 69% new height: 0% 2023-04-17 10:38:06.810 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef4410002000c5.illuminance Value: 4 2023-04-17 10:38:07.946 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Esszimmer.ShutterControl.level value: 0% 2023-04-17 10:38:07.997 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:08.047 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Esszimmer.ShutterControl.level old height: 74% new height: 0% 2023-04-17 10:38:09.833 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef4410001ffb25.illuminance Value: 12 2023-04-17 10:38:10.048 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rolllo Treppenhaus EG.ShutterControl.level value: 0% 2023-04-17 10:38:10.096 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:10.146 - debug: shuttercontrol.0 (1189956) shutterUpButton Rolllo Treppenhaus EG.ShutterControl.level old height: 66% new height: 0% 2023-04-17 10:38:12.149 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Küchenfenster.ShutterControl.level value: 0% 2023-04-17 10:38:12.196 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:12.247 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Küchenfenster.ShutterControl.level old height: 85% new height: 0% 2023-04-17 10:38:14.250 - info: shuttercontrol.0 (1189956) Button openAll Set ID: Rollo Terrassentür.ShutterControl.level value: 0% 2023-04-17 10:38:14.301 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check started 2023-04-17 10:38:14.361 - debug: shuttercontrol.0 (1189956) shutterUpButton Rollo Terrassentür.ShutterControl.level old height: 94% new height: 0% 2023-04-17 10:38:16.361 - debug: shuttercontrol.0 (1189956) Shuttercontrol save all shutter states 2023-04-17 10:38:17.613 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef4410001ff7de.illuminance Value: 27 2023-04-17 10:38:18.639 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.04cf8cdf3c7b5a7e.illuminance Value: 527 2023-04-17 10:38:28.250 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Kinderzimmer.ShutterControl.level old value = 72 new value = 0 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Kinderzimmer.ShutterControl.level 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 72 % 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:28.395 - debug: shuttercontrol.0 (1189956) Rollo Kinderzimmer.ShutterControl.level drived manually to 0. Old value = 72. New value = 0 2023-04-17 10:38:28.395 - debug: shuttercontrol.0 (1189956) Rollo Kinderzimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:30.392 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:30.395 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Schlafzimmer.ShutterControl.level old value = 100 new value = 0 2023-04-17 10:38:30.395 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Schlafzimmer.ShutterControl.level 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 100 % 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:30.396 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:30.447 - debug: shuttercontrol.0 (1189956) Rollo Schlafzimmer.ShutterControl.level drived manually to 0. Old value = 100. New value = 0 2023-04-17 10:38:30.447 - debug: shuttercontrol.0 (1189956) Rollo Schlafzimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:31.511 - debug: shuttercontrol.0 (1189956) Lightsensor changed: zigbee.0.54ef441000019dc2.illuminance Value: 17 2023-04-17 10:38:32.493 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:32.496 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Badezimmer.ShutterControl.level old value = 74 new value = 0 2023-04-17 10:38:32.496 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Badezimmer.ShutterControl.level 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 74 % 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:32.497 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:32.547 - debug: shuttercontrol.0 (1189956) Rollo Badezimmer.ShutterControl.level drived manually to 0. Old value = 74. New value = 0 2023-04-17 10:38:32.547 - debug: shuttercontrol.0 (1189956) Rollo Badezimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:34.592 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:34.672 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rolllo Treppenhaus OG.ShutterControl.level old value = 69 new value = 0 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rolllo Treppenhaus OG.ShutterControl.level 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 69 % 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:34.673 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:34.727 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus OG.ShutterControl.level drived manually to 0. Old value = 69. New value = 0 2023-04-17 10:38:34.727 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus OG.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:36.692 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Büro Steffi.ShutterControl.level old value = 73 new value = 0 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Büro Steffi.ShutterControl.level 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 73 % 2023-04-17 10:38:36.704 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:36.705 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:36.777 - debug: shuttercontrol.0 (1189956) Rollo Büro Steffi.ShutterControl.level drived manually to 0. Old value = 73. New value = 0 2023-04-17 10:38:36.777 - debug: shuttercontrol.0 (1189956) Rollo Büro Steffi.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:38.792 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:38.817 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Büro Mike.ShutterControl.level old value = 68 new value = 0 2023-04-17 10:38:38.817 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Büro Mike.ShutterControl.level 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 68 % 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:38.818 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:38.867 - debug: shuttercontrol.0 (1189956) Rollo Büro Mike.ShutterControl.level drived manually to 0. Old value = 68. New value = 0 2023-04-17 10:38:38.867 - debug: shuttercontrol.0 (1189956) Rollo Büro Mike.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:40.893 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Wohnzimmer.ShutterControl.level old value = 69 new value = 0 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Wohnzimmer.ShutterControl.level 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 69 % 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:40.896 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:40.952 - debug: shuttercontrol.0 (1189956) Rollo Wohnzimmer.ShutterControl.level drived manually to 0. Old value = 69. New value = 0 2023-04-17 10:38:40.953 - debug: shuttercontrol.0 (1189956) Rollo Wohnzimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:42.998 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:43.000 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Esszimmer.ShutterControl.level old value = 74 new value = 0 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Esszimmer.ShutterControl.level 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 74 % 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:43.001 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:43.051 - debug: shuttercontrol.0 (1189956) Rollo Esszimmer.ShutterControl.level drived manually to 0. Old value = 74. New value = 0 2023-04-17 10:38:43.051 - debug: shuttercontrol.0 (1189956) Rollo Esszimmer.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:45.095 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:45.098 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rolllo Treppenhaus EG.ShutterControl.level old value = 66 new value = 0 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rolllo Treppenhaus EG.ShutterControl.level 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 66 % 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:45.099 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:45.151 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus EG.ShutterControl.level drived manually to 0. Old value = 66. New value = 0 2023-04-17 10:38:45.151 - debug: shuttercontrol.0 (1189956) Rolllo Treppenhaus EG.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:47.197 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Küchenfenster.ShutterControl.level old value = 85 new value = 0 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Küchenfenster.ShutterControl.level 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:47.199 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:47.200 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 85 % 2023-04-17 10:38:47.200 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:47.200 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:47.250 - debug: shuttercontrol.0 (1189956) Rollo Küchenfenster.ShutterControl.level drived manually to 0. Old value = 85. New value = 0 2023-04-17 10:38:47.251 - debug: shuttercontrol.0 (1189956) Rollo Küchenfenster.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close 2023-04-17 10:38:49.301 - debug: shuttercontrol.0 (1189956) #0 wait for shutter check end 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) Shutter state changed: Rollo Terrassentür.ShutterControl.level old value = 94 new value = 0 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 shutterName: Rollo Terrassentür.ShutterControl.level 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 shutterState: 0 % 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_Mode 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 currentHeight: 0 % 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 oldHeight: 94 % 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 currentShutterState: activated 2023-04-17 10:38:49.304 - debug: shuttercontrol.0 (1189956) #1 currentShutterStateTime: 35 seconds 2023-04-17 10:38:49.355 - debug: shuttercontrol.0 (1189956) Rollo Terrassentür.ShutterControl.level drived manually to 0. Old value = 94. New value = 0 2023-04-17 10:38:49.355 - debug: shuttercontrol.0 (1189956) Rollo Terrassentür.ShutterControl.level Updated trigger action to Manu_Mode to prevent moving after window close
-
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
kurz gewartet
länger als 33 Sekunden plus Atempause?
-
@homoran sagte in Test Adapter shuttercontrol v1.4.x:
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
kurz gewartet
länger als 33 Sekunden plus Atempause?
Kann ich nicht beschwören aber ich denke schon. Probiere ich aber gern noch mal mit Stoppuhr aus. 33 Sekunden plus x ab wann? letzter Rollo ist fertig gefahren?
Was bedeuten diese Einträge im Log?
2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_ModeIch habe an dieser Stelle nichts gemacht außer dem Log zuzuschauen.
-
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
. 33 Sekunden plus x ab wann?
du hast doch 33 Sekunden eingestellt für Status verzögert ermitteln, oder?
Dann würde ich noch eine Atempause einlegen, falls es relevant ist, dass dann noch DP geschrieben und wieder gelesen werden müssen.
Also ab drücken des close_all bis zum Drücken des open_all.
-
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
Ich habe an dieser Stelle nichts gemacht außer dem Log zuzuschauen.
ist das 33 Sekunden nach Start?
was steht (zeitlich) davor? -
@homoran sagte in Test Adapter shuttercontrol v1.4.x:
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
Ich habe an dieser Stelle nichts gemacht außer dem Log zuzuschauen.
ist das 33 Sekunden nach Start?
was steht (zeitlich) davor?Druck auf closeAll
2023-04-17 10:35:37.180 - debug: shuttercontrol.0 (1189956) start buttonActionDruck auf openAll
2023-04-17 10:37:53.097 - debug: shuttercontrol.0 (1189956) start buttonActionAlso ganz massiv mehr als 33s.
Eintrag im Log mit dem Manu
2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 currentAction: Manu_Mode 2023-04-17 10:38:28.333 - debug: shuttercontrol.0 (1189956) #1 triggerAction: Manu_ModeDer Eintrag mit dem Manu Mode dürften ziemlich genau 35s sein und die sind seit gestern beim "Überprüfen den Rolladenstatus" eingestellt.
-
@firebowl sagte in Test Adapter shuttercontrol v1.4.x:
Der Eintrag mit dem Manu Mode dürften ziemlich genau 35s sein und die sind seit gestern beim "Überprüfen den Rolladenstatus" eingestellt.
so ist es!
Da wäre jetzt IMHO der "Angriffspunkt" an dem die weitere Eingrenzung starten sollte.
Da muss aber @simatec was zu schreiben.edit:
die 33 Sekunden maximale Laufzeit gelten doch für aufwärts? -
@homoran Nein das ist überhaupt die längste Laufzeit die ich habe. Ist die Küchentür, alle anderen sind deutlich schneller weil viel kürzer.
Küche aufwärts 31,3s
Küche runter 30,2sZeigt die Bosch App ja schön an.
-
@firebowl
Bitte teste die v1.4.28 ... Hatte beim fixen eine Zeile übersehen -
@weiserwolf sagte in Test Adapter shuttercontrol v1.4.x:
Wo kommt das auf einmal her in der 1.4.26. Irgendwie stehen alle Rolladen auf manuMode
Bitte teste die 1.4.28
