UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[klassisch]

@wendy2702 sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

@v8turbo Ist das dieses Teil ?

Ich denke ja

Die USRIOT haben softwareseitig 2 Produktlinien

• LAN Geräte. die haben eine Oberfläche mit USRIOT embleme
• WLAN Geräte. die haben ein oberfläche wie hier gezeigt. Graphisch nicht so ansprechend aber leistungsfähiger. Und für Bastler gibt es ein Einbau- Modul schon recht günstig

[klassisch]

Modbus Adapter

Hier der gleiche Port wie im USRIOT
Ich wähle immer "mehrere Geräte IDs"

"Alias benutzen" ändert die Adressnotierung. Die Holding Register beginnen dann mit 4 und Input register mit 3

Hier ein Beispiel mit dem Zähler SDM120

[V8Turbo]

@wendy2702 ja

[V8Turbo]

@klassisch naja die Application Setting und die Settings im Modbus Adapter wären wichtig. Alles andere wie STA und AP ist irrelevant. Kannst du die mal posten ?

[klassisch]

@v8turbo Wieso ist STA und AP irrelevant, wenn man das Gerät nicht erreicht? Oder wird da via LAN zugegriffen?

Ein Beispiel mit einem WLAN USRIOT und einen SDM120 Zähler habe ich dort gepostet und erläutert. Fehlt dort noch etwas?

https://forum.iobroker.net/post/851262

Bei Wechselrichtern könnten noch irgendwelche Sicherheitsmechanismen sein, Zugangsdaten, Freischaltungen u.ä.

[V8Turbo]

@klassisch Ich komme doch drauf. Hatte ich dir alles geschrieben... Ich kann mit nem USB -> RS485 Stick EIN Register lesen. Ohne Probleme mehrere Stunden, Tage lang... Aber nicht mehr. Sobald ich ein 2. Eintrage geht nix mehr. So da ja viele mit irgendwelchen Pausen zwischen den Abfragen probleme haben dachte ich mir ich hole mir das LAN -> RS485 Teil. Aber ich bekomme es nicht zum laufen, das ist mein Problem gerade. Und ja es ist per LAN Angeschlossen ans Netzwerk. Daher sind STA und AP völlig egal. Es geht um die restlichen Einstellungen, es muss ja was falsch sein wenn das Teil nicht die Register abruft bzw. ständig Timeout kommt. Ich weiß aber nicht was...

[klassisch]

@v8turbo Die Registereinstellungen hast Du genauso übernommen wie beim USB Stick?

[V8Turbo]

@klassisch ja

[V8Turbo]

Diese Register (sind wohl alle auf der gleichen Adresse weil im Log steht er greift nur auf 1668 zu und holt 22 Daten)...

_address	name	description	unit	type	len	factor	offset	formula	role	room	poll	wp	cw	isScale
1668	PV_Generation_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false
1672	Load_Consumption_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false
1676	Energy_Purchase_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false
1680	Energy_Selling_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false
1684	Bat_Charge_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false
1688	Bat_Discharge_Today		kWh	uint32be	2	0,01	0		state		true	false	false	false

Das LOG dazu

admin.0
2023-01-17 10:19:58.552	info	<== Disconnect system.user.admin from ::ffff:192.168.178.203 modbus

admin.0
2023-01-17 10:19:58.552	info	<== Disconnect system.user.admin from ::ffff:192.168.178.203 modbus

modbus.0
2023-01-17 10:19:52.410	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:19:52.288	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:19:52.286	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:19:36.780	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:19:36.704	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:19:36.703	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:19:21.199	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:19:21.122	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:19:21.121	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:19:05.618	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:19:05.533	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:19:05.532	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:18:50.021	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:18:49.944	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:18:49.942	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:18:34.440	debug	[DevID_2/holdingRegs] Poll address 1668 DONE
 
modbus.0
2023-01-17 10:18:34.282	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:18:34.281	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:18:18.778	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:18:18.701	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:18:18.700	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:18:03.197	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:18:03.119	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:18:03.118	debug	[DevID_2] Poll start ---------------------

modbus.0
2023-01-17 10:17:47.684	info	List of port: [{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyUSB0"}]

modbus.0
2023-01-17 10:17:47.683	info	Check /dev/ttyUSB0 : true

modbus.0
2023-01-17 10:17:47.683	info	Check /dev/ttyAMA0 : true

modbus.0
2023-01-17 10:17:47.681	info	Verify [{"path":"/dev/ttyUSB0","manufacturer":"FTDI","serialNumber":"A10NB15S","pnpId":"usb-FTDI_FT232R_USB_UART_A10NB15S-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyAMA0"}]

modbus.0
2023-01-17 10:17:47.616	debug	[DevID_2/holdingRegs] Poll address 1668 DONE

modbus.0
2023-01-17 10:17:47.541	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0
2023-01-17 10:17:47.540	debug	[DevID_2] Poll start ---------------------

LOG wenn ich mehrere Register drin habe

modbus.0

	2023-01-16 20:55:36.525	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:55:36.523	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:55:36.520	info	Disconnected from slave

modbus.0

	2023-01-16 20:55:35.519	warn	Poll error count: 9 code: {"err":"timeout","timeout":5000}

modbus.0

	2023-01-16 20:55:35.518	error	Request timed out.

modbus.0

	2023-01-16 20:55:35.517	warn	Error: undefined

admin.0

	2023-01-16 20:55:30.945	info	==> Connected system.user.admin from ::ffff:192.168.178.201

modbus.0

	2023-01-16 20:55:30.516	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:55:30.514	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:55:30.481	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:55:30.481	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:55:30.480	info	Connected to slave

modbus.0

	2023-01-16 20:55:30.473	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:54:30.477	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:54:30.475	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:54:30.472	info	Disconnected from slave

modbus.0

	2023-01-16 20:54:29.473	warn	Poll error count: 8 code: {"err":"timeout","timeout":5000}

modbus.0

	2023-01-16 20:54:29.472	error	Request timed out.

modbus.0

	2023-01-16 20:54:29.470	warn	Error: undefined

modbus.0

	2023-01-16 20:54:24.497	error	Wrong CRC for frame: 2,3,2,128,2,3,86

modbus.0

	2023-01-16 20:54:24.468	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:54:24.466	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:54:24.426	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:54:24.425	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:54:24.424	info	Connected to slave

modbus.0

	2023-01-16 20:54:24.415	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:53:24.419	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:53:24.418	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:53:24.413	info	Disconnected from slave

modbus.0

	2023-01-16 20:53:23.411	error	Request timed out.

modbus.0

	2023-01-16 20:53:23.410	warn	Error: undefined

modbus.0

	2023-01-16 20:53:23.400	warn	Poll error count: 7 code: "App Timeout"

modbus.0

	2023-01-16 20:53:18.409	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers

modbus.0

	2023-01-16 20:53:18.407	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0

	2023-01-16 20:53:18.364	debug	[DevID_2/holdingRegs] Poll address 1412 - 6 registers

modbus.0

	2023-01-16 20:53:18.359	debug	[DevID_2/holdingRegs] Poll address 1157 DONE

modbus.0

	2023-01-16 20:53:18.234	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:53:18.231	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:53:18.198	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:53:18.197	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:53:18.196	info	Connected to slave

modbus.0

	2023-01-16 20:53:18.187	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:52:18.203	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:52:18.202	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:52:18.185	info	Disconnected from slave

modbus.0

	2023-01-16 20:52:18.133	warn	Poll error count: 6 code: "App Timeout"

modbus.0

	2023-01-16 20:52:13.248	debug	[DevID_2/holdingRegs] Poll address 1544 - 3 registers

modbus.0

	2023-01-16 20:52:13.246	debug	[DevID_2/holdingRegs] Poll address 1476 DONE

modbus.0

	2023-01-16 20:52:13.217	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers

modbus.0

	2023-01-16 20:52:13.214	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0

	2023-01-16 20:52:13.169	debug	[DevID_2/holdingRegs] Poll address 1412 - 6 registers

modbus.0

	2023-01-16 20:52:13.166	debug	[DevID_2/holdingRegs] Poll address 1157 DONE

modbus.0

	2023-01-16 20:52:13.040	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:52:13.038	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:52:12.932	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:52:12.931	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:52:12.930	info	Connected to slave

modbus.0

	2023-01-16 20:52:12.922	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:51:12.924	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:51:12.923	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:51:12.920	info	Disconnected from slave

modbus.0

	2023-01-16 20:51:12.825	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:51:12.824	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:51:11.920	error	Request timed out.

modbus.0

	2023-01-16 20:51:11.919	warn	Error: undefined

modbus.0

	2023-01-16 20:51:11.772	warn	Poll error count: 5 code: "App Timeout"

modbus.0

	2023-01-16 20:51:06.918	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers

modbus.0

	2023-01-16 20:51:06.917	debug	[DevID_2/holdingRegs] Poll address 1640 DONE

modbus.0

	2023-01-16 20:51:06.886	debug	[DevID_2/holdingRegs] Poll address 1640 - 2 registers

modbus.0

	2023-01-16 20:51:06.885	debug	[DevID_2/holdingRegs] Poll address 1544 DONE

modbus.0

	2023-01-16 20:51:06.839	debug	[DevID_2/holdingRegs] Poll address 1544 - 3 registers

modbus.0

	2023-01-16 20:51:06.837	debug	[DevID_2/holdingRegs] Poll address 1476 DONE

modbus.0

	2023-01-16 20:51:06.792	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers

modbus.0

	2023-01-16 20:51:06.789	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0

	2023-01-16 20:51:06.744	debug	[DevID_2/holdingRegs] Poll address 1412 - 6 registers

modbus.0

	2023-01-16 20:51:06.741	debug	[DevID_2/holdingRegs] Poll address 1157 DONE

modbus.0

	2023-01-16 20:51:06.616	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:51:06.613	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:51:06.572	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:51:06.571	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:51:06.570	info	Connected to slave

modbus.0

	2023-01-16 20:51:06.561	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:50:06.564	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:50:06.563	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:50:06.560	info	Disconnected from slave

modbus.0

	2023-01-16 20:50:05.561	warn	Poll error count: 4 code: {"err":"timeout","timeout":5000}

modbus.0

	2023-01-16 20:50:05.560	error	Request timed out.

modbus.0

	2023-01-16 20:50:05.552	warn	Error: undefined

modbus.0

	2023-01-16 20:50:00.582	error	Wrong CRC for frame: 2,3,2,0,2,3,86

modbus.0

	2023-01-16 20:50:00.552	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:50:00.550	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:50:00.434	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:50:00.434	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:50:00.434	info	Connected to slave

modbus.0

	2023-01-16 20:50:00.428	debug	connect to serial /dev/ttyUSB0 with 9600

javascript.0

	2023-01-16 20:50:00.014	info	script.js.Sonnenstand: Script Sonnenstand; Erfolgreich gelaufen, Werte akzeptiert

modbus.0

	2023-01-16 20:49:00.430	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:49:00.429	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:49:00.426	info	Disconnected from slave

modbus.0

	2023-01-16 20:48:59.433	warn	Poll error count: 3 code: {"err":"timeout","timeout":5000}

modbus.0

	2023-01-16 20:48:59.426	error	Request timed out.

modbus.0

	2023-01-16 20:48:59.425	warn	Error: undefined

modbus.0

	2023-01-16 20:48:54.423	debug	[DevID_2/holdingRegs] Poll address 1412 - 6 registers

modbus.0

	2023-01-16 20:48:54.419	debug	[DevID_2/holdingRegs] Poll address 1157 DONE

modbus.0

	2023-01-16 20:48:54.293	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:48:54.291	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:48:54.258	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:48:54.257	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:48:54.256	info	Connected to slave

modbus.0

	2023-01-16 20:48:54.248	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:47:54.251	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:47:54.249	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:47:54.246	info	Disconnected from slave

modbus.0

	2023-01-16 20:47:53.245	warn	Poll error count: 2 code: {"err":"timeout","timeout":5000}

modbus.0

	2023-01-16 20:47:53.244	error	Request timed out.

modbus.0

	2023-01-16 20:47:53.243	warn	Error: undefined

modbus.0

	2023-01-16 20:47:48.239	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:47:48.237	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:47:48.208	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:47:48.208	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:47:48.206	info	Connected to slave

modbus.0

	2023-01-16 20:47:48.196	debug	connect to serial /dev/ttyUSB0 with 9600

modbus.0

	2023-01-16 20:46:48.199	debug	Cleaning up request fifo.

modbus.0

	2023-01-16 20:46:48.198	debug	Clearing timeout of the current request.

modbus.0

	2023-01-16 20:46:48.193	info	Disconnected from slave

modbus.0

	2023-01-16 20:46:48.126	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:46:48.125	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:46:47.192	error	Request timed out.

modbus.0

	2023-01-16 20:46:47.190	warn	Error: undefined

modbus.0

	2023-01-16 20:46:47.071	warn	Poll error count: 1 code: "App Timeout"

modbus.0

	2023-01-16 20:46:42.188	debug	[DevID_2/holdingRegs] Poll address 1544 - 3 registers

modbus.0

	2023-01-16 20:46:42.186	debug	[DevID_2/holdingRegs] Poll address 1476 DONE

modbus.0

	2023-01-16 20:46:42.157	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers

modbus.0

	2023-01-16 20:46:42.154	debug	[DevID_2/holdingRegs] Poll address 1412 DONE

modbus.0

	2023-01-16 20:46:42.111	debug	[DevID_2/holdingRegs] Poll address 1412 - 6 registers

modbus.0

	2023-01-16 20:46:42.107	debug	[DevID_2/holdingRegs] Poll address 1157 DONE

modbus.0

	2023-01-16 20:46:41.919	debug	[DevID_2/holdingRegs] Poll address 1157 - 43 registers

modbus.0

	2023-01-16 20:46:41.916	debug	[DevID_2/holdingRegs] Poll address 1056 DONE

modbus.0

	2023-01-16 20:46:41.871	debug	[DevID_2/holdingRegs] Poll address 1056 - 1 registers

modbus.0

	2023-01-16 20:46:41.870	debug	Initialization of scale factors done!

modbus.0

	2023-01-16 20:46:41.869	debug	[DevID_2] Poll start ---------------------

modbus.0

	2023-01-16 20:46:41.867	info	Connected to slave

modbus.0

	2023-01-16 20:46:41.858	debug	connect to serial /dev/ttyUSB0 with 9600

[V8Turbo]

Das ist vom USB... Das LAN/WLAN Teil geht ja nicht. Es muss an dem Ding liegen...

[klassisch]

@v8turbo Ich hatte gestern Deine Einstellungen mit meinem WLAN USRIOT plausibilisiert. Da ist mir nichts aufgefallen.

Wie sieht Deine aktuelle ioBroker Modbus konfig aus?

Alles richtig verkabelt? A B , kein Wackelkontakt?

[V8Turbo]

@klassisch

[V8Turbo]

@klassisch Nein ab ist richtig dran.

[klassisch]

Eine Sache habe ich noch gesehen
Wenn ich -> Quick Configure -> 2F UART Setting eingebe, sehe ich die TCP Modbus RTU Einstellung. Da hat man alles zusammen. Sollte bei Dir auch auftauchen.

[V8Turbo]

@klassisch ja sieht bei mir genau so aus

[klassisch]

Du hast "Mehrere Geräte Ids" angekreuzt. Mache ich auch immer so. Aber im Post oben mit den Ragister Adressen sehe ich die nicht.
Kannst Du mal einen Screenshot davon zeigen?

[V8Turbo]

@klassisch Habe ich gerade erst probiert da du es so hast. Hab natürlich überall Slave ID 2 eingetragen. Geht aber auch nicht. Es kommt ständig Timeout im Log.

modbus.0
	2023-01-21 16:29:06.303	debug	Socket closed with error
modbus.0
	2023-01-21 16:29:06.297	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}
modbus.0
	2023-01-21 16:29:06.294	error	Client in error state.
modbus.0
	2023-01-21 16:29:06.292	error	Request timed out.
modbus.0
	2023-01-21 16:29:06.291	warn	Error: undefined
modbus.0
	2023-01-21 16:29:01.283	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers
modbus.0
	2023-01-21 16:29:01.283	debug	Initialization of scale factors done!
modbus.0
	2023-01-21 16:29:01.281	debug	[DevID_2] Poll start ---------------------
modbus.0
	2023-01-21 16:29:01.280	info	Connected to slave 192.168.178.190

[klassisch]

A B Kreuzen? Hast Du sicher schon mehrfach gemacht?

[klassisch]

Wenn es nicht mit USB ginge würde ich

• Registertabelle des Wechselrichters ansehen. Hast Du einen Link?
• ioBroker Modbus Adapter stoppen
• dieses Programm http://en.radzio.dxp.pl/modbus-master-simulator/ starten und die Register eingeben

Dann kann man den ioBroker ausschließen und kommt näher an den Modbus

[V8Turbo]

@klassisch Kann ich versuchen bzw hatte ich schonmal gemacht aber es geht ja per USB zumindest eins... Hab das Grad nochmal getestet. Wenn ich ein 2. Register dazu mach geht es auch noch aber sobald ein 3. kommt geht es nicht mehr...

odbus.0
	2023-01-23 17:28:51.308	debug	Cleaning up request fifo.
modbus.0
	2023-01-23 17:28:51.307	debug	Clearing timeout of the current request.
modbus.0
	2023-01-23 17:28:51.302	info	Disconnected from slave
modbus.0
	2023-01-23 17:28:50.303	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}
modbus.0
	2023-01-23 17:28:50.301	error	Request timed out.
modbus.0
	2023-01-23 17:28:50.301	warn	Error: undefined
modbus.0
	2023-01-23 17:28:45.379	error	Wrong CRC for frame: 2,3,44,0,0,0,122,0,0,3,99,0,0,1,157,0,0,4,192,192,0,0,1,51,0,0,2,158,0,0,0,0,0,0,0,174,0,0,0,14,0,0,2,120,0,0,0,24,135
modbus.0
	2023-01-23 17:28:45.292	debug	[DevID_2/holdingRegs] Poll address 1157 - 1 registers
modbus.0
	2023-01-23 17:28:45.292	debug	Initialization of scale factors done!
modbus.0
	2023-01-23 17:28:45.290	debug	[DevID_2] Poll start ---------------------
modbus.0
	2023-01-23 17:28:45.289	info	Connected to slave
modbus.0
	2023-01-23 17:28:45.280	debug	connect to serial /dev/ttyUSB0 with 9600
modbus.0
	2023-01-23 17:28:44.932	debug	Add holdingRegisters.2.41689_Bat_Discharge_Today: {"_id":"holdingRegisters.2.41689_Bat_Discharge_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1688,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.931	debug	Add holdingRegisters.2.41685_Bat_Charge_Today: {"_id":"holdingRegisters.2.41685_Bat_Charge_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1684,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.931	debug	Add holdingRegisters.2.41681_Energy_Selling_Today: {"_id":"holdingRegisters.2.41681_Energy_Selling_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1680,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.930	debug	Add holdingRegisters.2.41677_Energy_Purchase_Today: {"_id":"holdingRegisters.2.41677_Energy_Purchase_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1676,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.929	debug	Add holdingRegisters.2.41673_Load_Consumption_Today: {"_id":"holdingRegisters.2.41673_Load_Consumption_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1672,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.929	debug	Add holdingRegisters.2.41669_PV_Generation_Today: {"_id":"holdingRegisters.2.41669_PV_Generation_Today","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kWh"},"native":{"regType":"holdingRegs","address":1668,"deviceId":2,"type":"uint32be","len":2,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.928	debug	Add holdingRegisters.2.41477_Power_PV_Total: {"_id":"holdingRegisters.2.41477_Power_PV_Total","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kW"},"native":{"regType":"holdingRegs","address":1476,"deviceId":2,"type":"uint16be","len":1,"offset":0,"factor":0.1,"poll":true}}
modbus.0
	2023-01-23 17:28:44.928	debug	Add holdingRegisters.2.41158_Active_Power_Output_Total: {"_id":"holdingRegisters.2.41158_Active_Power_Output_Total","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"kW"},"native":{"regType":"holdingRegs","address":1157,"deviceId":2,"type":"int16be","len":1,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2023-01-23 17:28:44.927	debug	Initialize Objects for holdingRegs: [{"_address":41158,"deviceId":2,"name":"Active_Power_Output_Total","description":"","unit":"kW","type":"int16be","len":1,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"address":1157,"id":"holdingRegisters.2.41158_Active_Power_Output_Total"},{"_address":41477,"deviceId":2,"name":"Power_PV_Total","description":"","unit":"kW","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"address":1476,"id":"holdingRegisters.2.41477_Power_PV_Total"},{"_address":41669,"name":"PV_Generation_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1668,"id":"holdingRegisters.2.41669_PV_Generation_Today"},{"_address":41673,"name":"Load_Consumption_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1672,"id":"holdingRegisters.2.41673_Load_Consumption_Today"},{"_address":41677,"name":"Energy_Purchase_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1676,"id":"holdingRegisters.2.41677_Energy_Purchase_Today"},{"_address":41681,"name":"Energy_Selling_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1680,"id":"holdingRegisters.2.41681_Energy_Selling_Today"},{"_address":41685,"name":"Bat_Charge_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1684,"id":"holdingRegisters.2.41685_Bat_Charge_Today"},{"_address":41689,"name":"Bat_Discharge_Today","description":"","unit":"kWh","type":"uint32be","len":2,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":false,"cw":false,"isScale":false,"deviceId":2,"address":1688,"id":"holdingRegisters.2.41689_Bat_Discharge_Today"}]
modbus.0
	2023-01-23 17:28:44.926	debug	Initialize Objects for inputRegs: []
modbus.0
	2023-01-23 17:28:44.925	debug	Initialize Objects for coils: []
modbus.0
	2023-01-23 17:28:44.925	debug	Initialize Objects for disInputs: []
modbus.0
	2023-01-23 17:28:44.775	info	starting. Version 5.0.11 (non-npm: ioBroker/ioBroker.modbus) in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.24
modbus.0
	2023-01-23 17:28:44.419	debug	Plugin sentry Initialize Plugin (enabled=true)
modbus.0
	2023-01-23 17:28:44.348	debug	States connected to redis: 127.0.0.1:9000
modbus.0
	2023-01-23 17:28:44.284	debug	States create User PubSub Client
modbus.0
	2023-01-23 17:28:44.282	debug	States create System PubSub Client
modbus.0
	2023-01-23 17:28:44.271	debug	Redis States: Use Redis connection: 127.0.0.1:9000
modbus.0
	2023-01-23 17:28:44.248	debug	Objects connected to redis: 127.0.0.1:9001
modbus.0
	2023-01-23 17:28:44.241	debug	Objects client initialize lua scripts
modbus.0
	2023-01-23 17:28:44.214	debug	Objects create User PubSub Client
modbus.0
	2023-01-23 17:28:44.213	debug	Objects create System PubSub Client
modbus.0
	2023-01-23 17:28:44.210	debug	Objects client ready ... initialize now
modbus.0
	2023-01-23 17:28:44.174	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001
admin.0
	2023-01-23 17:28:43.533	info	<== Disconnect system.user.admin from ::ffff:192.168.178.203 modbus
host.raspberrypi
	2023-01-23 17:28:42.914	info	instance system.adapter.modbus.0 started with pid 7562
host.raspberrypi
	2023-01-23 17:28:40.250	info	instance system.adapter.modbus.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.raspberrypi
	2023-01-23 17:28:39.757	info	stopInstance system.adapter.modbus.0 send kill signal
modbus.0
	2023-01-23 17:28:39.684	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
modbus.0
	2023-01-23 17:28:39.683	debug	Plugin sentry destroyed
modbus.0
	2023-01-23 17:28:39.681	info	terminating
modbus.0
	2023-01-23 17:28:39.678	info	Got terminate signal TERMINATE_YOURSELF
host.raspberrypi
	2023-01-23 17:28:39.670	info	stopInstance system.adapter.modbus.0 (force=false, process=true)
modbus.0
	2023-01-23 17:28:22.542	debug	Cleaning up request fifo.
modbus.0
	2023-01-23 17:28:22.541	debug	Clearing timeout of the current request.
modbus.0
	2023-01-23 17:28:22.537	info	Disconnected from slave
modbus.0
	2023-01-23 17:28:21.534	warn	Poll error count: 1 code: {"err":"timeout","timeout":5000}
modbus.0
	2023-01-23 17:28:21.533	error	Request timed out.
modbus.0
	2023-01-23 17:28:21.532	warn	Error: undefined
modbus.0
	2023-01-23 17:28:16.530	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers
modbus.0
	2023-01-23 17:28:16.527	debug	[DevID_2/holdingRegs] Poll address 1476 DONE
modbus.0
	2023-01-23 17:28:16.493	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers
modbus.0
	2023-01-23 17:28:16.492	debug	[DevID_2] Poll start ---------------------
admin.0
	2023-01-23 17:27:57.689	info	==> Connected system.user.admin from ::ffff:192.168.178.203
modbus.0
	2023-01-23 17:27:46.437	debug	[DevID_2/holdingRegs] Poll address 1668 DONE
modbus.0
	2023-01-23 17:27:46.360	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers
modbus.0
	2023-01-23 17:27:46.358	debug	[DevID_2/holdingRegs] Poll address 1476 DONE
modbus.0
	2023-01-23 17:27:46.323	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers
modbus.0
	2023-01-23 17:27:46.321	debug	[DevID_2] Poll start ---------------------
modbus.0
	2023-01-23 17:27:16.266	debug	[DevID_2/holdingRegs] Poll address 1668 DONE
modbus.0
	2023-01-23 17:27:16.189	debug	[DevID_2/holdingRegs] Poll address 1668 - 22 registers
modbus.0
	2023-01-23 17:27:16.187	debug	[DevID_2/holdingRegs] Poll address 1476 DONE
modbus.0
	2023-01-23 17:27:16.154	debug	[DevID_2/holdingRegs] Poll address 1476 - 1 registers