(GELÖST) zigbee-herdsmann-converters / wie manuell updaten?

Diamand2k22

ok kapiert, man lernt viel dazu!

nach der github installation wohl zigbee neu konfigurieren oder?

pi4b@pi4b:~$ cd /opt/iobroker
pi4b@pi4b:/opt/iobroker$ npm uninstall zigbee-herdsman-converters

removed 2 packages in 7s

65 packages are looking for funding
  run `npm fund` for details
pi4b@pi4b:/opt/iobroker$ npm uninstall zigbee-herdsman

removed 3 packages in 6s

65 packages are looking for funding
  run `npm fund` for details
pi4b@pi4b:/opt/iobroker$

Thomas Braun

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

danach wohl zigbee neu konfigurieren oder?

Nö, sollte nicht notwendig sein.

Diamand2k22

@thomas-braun

ok jetzt sieht es so aus

pi4b@pi4b:/opt/iobroker$ npm ls --depth=3 | grep zigbee
└─┬ iobroker.zigbee@1.7.6
  ├─┬ zigbee-herdsman-converters@14.0.575
  │ └── zigbee-herdsman@0.14.46 deduped
  └─┬ zigbee-herdsman@0.14.46
pi4b@pi4b:/opt/iobroker$

jetzt installiere ich die github version u. hoffentlich klappt es.

Thomas Braun

@diamand2k22

Dann sollte dann zigbee-herdsman-converters@14.0.666 installiert sein.
Die zigbee-herdsman-converters@14.0.667 ist erst zwei Stunden alt, die ist noch nicht drin. Aber ich hoffe deine Thermostate sind nicht ausgerechnet erst da enthalten.

Diamand2k22

@thomas-braun

shit...jetzt haben wir es glaub ich geschafft, jetzt läuft der adapter nicht mehr :-/...

Ah,ok das ist die me167.js seh ich grad

2022-11-14 22:48:32.397 - error: zigbee.0 (210117) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2022-11-14 22:48:32.398 - error: zigbee.0 (210117) unhandled promise rejection: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/me167.js'
2022-11-14 22:48:32.677 - error: zigbee.0 (210117) Error: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/me167.js'
at Object.openSync (node:fs:590:3)
at Object.readFileSync (node:fs:458:35)
at Zigbee.getExternalDefinition (/opt/iobroker/node_modules/iobroker.zigbee/main.js:221:38)
at getExternalDefinition.next ()
at Zigbee.applyExternalConverters (/opt/iobroker/node_modules/iobroker.zigbee/main.js:235:20)
at Zigbee.onReady (/opt/iobroker/node_modules/iobroker.zigbee/main.js:182:14)
at Zigbee.emit (node:events:513:28)
at Zigbee.emit (node:domain:489:12)
at /opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:9132:26
2022-11-14 22:48:32.680 - error: zigbee.0 (210117) Exception-Code: ENOENT: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/me167.js'
2022-11-14 22:48:32.714 - info: zigbee.0 (210117) cleaned everything up...
2022-11-14 22:48:32.717 - info: zigbee.0 (210117) terminating
2022-11-14 22:48:32.722 - warn: zigbee.0 (210117) Terminated (UNCAUGHT_EXCEPTION): Without reason
2022-11-14 22:48:33.308 - error: host.pi4b Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: Error: ENOENT: no such file or directory, open '/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/me167.js'
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Object.openSync (node:fs:590:3)
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Object.readFileSync (node:fs:458:35)
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Zigbee.getExternalDefinition (/opt/iobroker/node_modules/iobroker.zigbee/main.js:221:38)
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at getExternalDefinition.next ()
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Zigbee.applyExternalConverters (/opt/iobroker/node_modules/iobroker.zigbee/main.js:235:20)
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Zigbee.onReady (/opt/iobroker/node_modules/iobroker.zigbee/main.js:182:14)
2022-11-14 22:48:33.309 - error: host.pi4b Caught by controller[1]: at Zigbee.emit (node:events:513:28)
2022-11-14 22:48:33.310 - error: host.pi4b Caught by controller[1]: at Zigbee.emit (node:domain:489:12)
2022-11-14 22:48:33.310 - error: host.pi4b Caught by controller[1]: at /opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:9132:26
2022-11-14 22:48:33.310 - error: host.pi4b instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2022-11-14 22:48:33.310 - info: host.pi4b Restart adapter system.adapter.zigbee.0 because enabled
2022-11-14 22:48:33.310 - warn: host.pi4b Do not restart adapter system.adapter.zigbee.0 because restart loop detected

Thomas Braun

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

jetzt haben wir es glaub ich geschafft

Wir? Du!
Bei mir läuft der Adapter in der github-Version.

Thomas Braun

@diamand2k22

cd /opt/iobroker && npm ls

Diamand2k22

@thomas-braun

es läuft wieder alles.
hatte noch einen external converter drin stehen, hab jetzt den Pfad entfernt, weil er mir bei der installation der github version die .js gelöscht hat.

pi4b@pi4b:~$ cd /opt/iobroker && npm ls
iobroker.inst@3.0.0 /opt/iobroker
├── iobroker.admin@6.2.23
├── iobroker.alexa2@3.21.0
├── iobroker.alias-manager@1.2.6
├── iobroker.backitup@2.5.6
├── iobroker.device-reminder@1.2.9 (git+ssh://git@github.com/xenon-s/ioBroker.device-reminder.git#4162ebc0a96605f103df23e277abcf1b673065dd)
├── iobroker.device-watcher@2.0.2
├── iobroker.discovery@3.1.0
├── iobroker.dwd@2.8.3
├── iobroker.ecovacs-deebot@1.4.8
├── iobroker.fritzdect@2.2.6
├── iobroker.fronius-solarweb@0.0.3 (git+ssh://git@github.com/TA2k/ioBroker.fronius-solarweb.git#cf94c61b368f7ffb99b6d3411d65d4e377f9ef28)
├── iobroker.fronius@1.1.6 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.fronius.git#c644a95d480403a1ef277e822df6232ffc66daf5)
├── iobroker.ical@1.13.2
├── iobroker.icons-mfd-svg@1.1.0
├── iobroker.influxdb@3.2.0
├── iobroker.info@1.9.21
├── iobroker.intex@0.0.7
├── iobroker.javascript@6.1.3
├── iobroker.js-controller@4.0.23
├── iobroker.net-tools@0.2.0
├── iobroker.oilfox@4.1.2
├── iobroker.ping@1.5.3
├── iobroker.rpi2@1.3.2
├── iobroker.shelly@6.2.4
├── iobroker.socketio@6.2.0
├── iobroker.synology@2.1.13
├── iobroker.tr-064@4.2.17
├── iobroker.trashschedule@2.0.3
├── iobroker.vis@1.4.15
├── iobroker.web@5.2.10
├── iobroker.whatsapp-cmb@0.2.3
├── iobroker.ws@2.2.1
└── iobroker.zigbee@1.7.6 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#84c9eb7accca10de87143e20c4494413a5a16873)

Thomas Braun

@diamand2k22

Das ist nicht die vollständige Ausgabe.

Diamand2k22

@thomas-braun

habs grad gemerkt, habs oben ausgebessert!
aber trotzdem noch was schief

pi4b@pi4b:/opt/iobroker$ npm ls --depth=3 | grep zigbee
└─┬ iobroker.zigbee@1.7.6 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#84c9eb7accca10de87143e20c4494413a5a16873)
  ├─┬ zigbee-herdsman-converters@14.0.666
  │ └── zigbee-herdsman@0.14.73 deduped
  └─┬ zigbee-herdsman@0.14.73
npm ERR! code ELSPROBLEMS
npm ERR! invalid: @types/node@14.18.33 /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/node

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi4b/.npm/_logs/2022-11-14T22_07_05_771Z-debug-0.log

Thomas Braun

@diamand2k22

Kannste überlesen. Ist harmlos, soweit ich das sehe.

Diamand2k22

@thomas-braun

sieht in Farbe etwas übler aus.

aber jetzt passt die version schon mal.

Thomas Braun

@diamand2k22

Bei

cd /opt/iobroker && npm ls

kommen keine Fehlermeldungen? Die tieferen Ebenen sind nicht so wichtig, da ist immer etwas Chaos...

Diamand2k22

@thomas-braun

bei der Ausgabe kommen keine Fehler!
Danke dir!

Thomas Braun

@diamand2k22

Und das Gerät ist auch drin?

Diamand2k22

@thomas-braun

scheint nicht zu klappen

Thomas Braun

@diamand2k22

Hier mal geschaut?
https://forum.iobroker.net/topic/59852/hama-smartes-heizkörper-thermostat?_=1668467039158

Diamand2k22

@thomas-braun

Hallo Thomas,

hab das mal reinkopiert aber dann startet der zigbee adapter nicht mehr

2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52
2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: .withAwayMode()],
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: ^
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: TypeError: exposes.climate(...).withSetpoint(...).withLocalTemperature(...).withSystemMode(...).withLocalTemperatureCalibration(...).withAwayMode is not a function
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52:18)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1033:32)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Function.Module._load (node:internal/modules/cjs/loader:868:12)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1057:19)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at require (node:internal/modules/cjs/helpers:103:18)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/index.js:118:30)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10)
2022-11-15 21:15:17.736 - error: host.pi4b instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)

Thomas Braun

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

hab das mal reinkopiert

Was wo reinkopiert?

Diamand2k22

@thomas-braun

@david-jung said in Hama Smartes Heizkörper-Thermostat:

@david-jung
so, ich habe folgendes gemacht:

die Datei: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js

etwas erweitert, jetzt kann ich die Ist-Temperatur ablesen, so wie die Soll-Temperatur setzen/lesen.
Den Modus (heizen/auto/aus) lesen, setzen.
Ventil Status ablesen.
Und Offset für Temperatur setzen/lesen.

/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js

const exposes = require('../lib/exposes');
const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
const tz = require('../converters/toZigbee');
const tuya = require('../lib/tuya');
const reporting = require('../lib/reporting');
const e = exposes.presets;
const ea = exposes.access;

module.exports = [
    {
        fingerprint: [{modelID: 'GbxAXL2\u0000', manufacturerName: '_TYST11_KGbxAXL2'},
            {modelID: 'uhszj9s\u0000', manufacturerName: '_TYST11_zuhszj9s'},
            {modelID: '88teujp\u0000', manufacturerName: '_TYST11_c88teujp'},
            {modelID: 'w7cahqs\u0000', manufacturerName: '_TYST11_yw7cahqs'},
            {modelID: 'w7cahqs', manufacturerName: '_TYST11_yw7cahqs'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_c88teujp'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_yw7cahqs'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_azqp6ssj'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_bvu2wnxz'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_zuhszj9s'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_9gvruqf5'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_zr9c0day'},
        ],
        model: 'SEA801-Zigbee/SEA802-Zigbee',
        vendor: 'Saswell',
        description: 'Thermostatic radiator valve',
        whiteLabel: [{vendor: 'HiHome', model: 'WZB-TRVL'}, {vendor: 'Hama', model: '00176592'},
            {vendor: 'RTX', model: 'ZB-RT1'}],
        fromZigbee: [fz.saswell_thermostat, fz.ignore_tuya_set_time, fz.ignore_basic_report, fz.legacy.tuya_thermostat_weekly_schedule],
        toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_away,
            tz.saswell_thermostat_child_lock, tz.saswell_thermostat_window_detection, tz.saswell_thermostat_frost_detection,
            tz.saswell_thermostat_calibration, tz.saswell_thermostat_anti_scaling, tz.tuya_thermostat_weekly_schedule],
        onEvent: tuya.onEventSetTime,
        meta: {
            thermostat: {
                weeklyScheduleMaxTransitions: 4,
                weeklyScheduleSupportedModes: [1], // bits: 0-heat present, 1-cool present (dec: 1-heat,2-cool,3-heat+cool)
                weeklyScheduleConversion: 'saswell',
            },
        },
        configure: async (device, coordinatorEndpoint, logger) => {
            const endpoint = device.getEndpoint(1);
            await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']);
        },
        exposes: [e.battery_low(), e.window_detection(), e.child_lock(),
            exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'),
            exposes.climate()
                .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE)
                .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET)
                // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777
                .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET)
                .withAwayMode()],
    },
	{
		/*added by djung 10.11.2022*/
	fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_h4cgnbzg'}],
        model: 'HZ',
        vendor: 'HAMA',
        description: 'Thermostatic radiator valve',
        whiteLabel: [{vendor: 'Hama', model: 'XXXxxxXXX'},],
        fromZigbee: [fz.saswell_thermostat],
        toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, 
            tz.saswell_thermostat_calibration],
        onEvent: tuya.onEventSetTime,
        configure: async (device, coordinatorEndpoint, logger) => {
            const endpoint = device.getEndpoint(1);
            await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']);
        },
        exposes: [
			e.battery_low(),
			/*e.switch(),*/
			/*e.lock(),*/
			exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'),
		
            exposes.climate()
                .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE)
                .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET)
                // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777
                .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET)
                ],
    },
];

soll man das irgendwo auf github oder so noch posten? Wenn ja, bitte zeigen wo
Grüße.
David.

NEWS

(GELÖST) zigbee-herdsmann-converters / wie manuell updaten?

Support us

869
Online

31.6k
Users

79.6k
Topics

1.3m
Posts

NEWS

(GELÖST) zigbee-herdsmann-converters / wie manuell updaten?

Support us

869Online

31.6kUsers

79.6kTopics

1.3mPosts

869
Online

31.6k
Users

79.6k
Topics

1.3m
Posts