Weihnachtsangebot 2025! 🎄

[Thomas Braun]

@dunadanlk

Trag schon mal

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00

als Gerätelink im Adapter ein

[Dunadanlk]

@thomas-braun

erledigt:+1:

Achso,weiß nicht ob es möglicherweise zusammen hängen kann... habe seit einigen Tagen einen Restart Loop im Systeminfo Adapter.

systeminfo.0
2022-04-24 20:43:58.623	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

systeminfo.0
2022-04-24 20:43:58.621	info	terminating

systeminfo.0
2022-04-24 20:43:58.087	error	Cannot read property 'getObjectList' of undefined

systeminfo.0
2022-04-24 20:43:58.085	error	TypeError: Cannot read property 'getObjectList' of undefined at Function.initAdapter (/opt/iobroker/node_modules/iobroker.systeminfo/myAdapter.js:44:55) at Adapter.<anonymous> (/opt/iobroker/node_modules/iobroker.systeminfo/myAdapter.js:118:37) at Adapter.emit (events.js:314:20) at /opt/iobroker/node_modules/@iobroker/js-controller-adapter/build/lib/adapter/adapter.js:8226:26

systeminfo.0
2022-04-24 20:43:58.082	error	unhandled promise rejection: Cannot read property 'getObjectList' of undefined

systeminfo.0
2022-04-24 20:43:58.081	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

systeminfo.0
2022-04-24 20:43:58.039	info	starting. Version 0.3.1 in /opt/iobroker/node_modules/iobroker.systeminfo, node: v12.22.10, js-controller: 4.0.21

[Thomas Braun]

@dunadanlk
Nein.
Aber bring deine node-Installation auf Version 14.

[Asgothian]

@dunadanlk

Bitte mach das folgende:

• zigbee adapter anhalten
• log löschen
• zigbee adapter starten
• 30 sekunden warten
• alle Log Meldungen des Zigbee Adapters als text posten.

A.

[Dunadanlk]

@asgothian 2022-04-24 21:12:32.005 - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2022-04-24 21:12:32.152 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 10827
2022-04-24 21:12:35.646 - info: zigbee.0 (10827) starting. Version 1.6.16 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.19.1, js-controller: 4.0.21
2022-04-24 21:12:35.756 - info: zigbee.0 (10827) Starting Zigbee npm ...
2022-04-24 21:12:36.391 - error: zigbee.0 (10827) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00'"
2022-04-24 21:12:36.392 - error: zigbee.0 (10827) Failed to start Zigbee
2022-04-24 21:12:36.393 - error: zigbee.0 (10827) Error herdsman start
2022-04-24 21:12:36.396 - info: zigbee.0 (10827) Installed Version: iobroker.zigbee@1.6.16
2022-04-24 21:12:46.396 - info: zigbee.0 (10827) Try to reconnect. 1 attempts left
2022-04-24 21:12:46.397 - info: zigbee.0 (10827) Starting Zigbee npm ...
2022-04-24 21:12:46.419 - info: zigbee.0 (10827) Installed Version: iobroker.zigbee@1.6.16
2022-04-24 21:12:46.652 - error: zigbee.0 (10827) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00'"
2022-04-24 21:12:46.653 - error: zigbee.0 (10827) Failed to start Zigbee
2022-04-24 21:12:46.654 - error: zigbee.0 (10827) Error herdsman start
2022-04-24 21:13:06.266 - error: zigbee.0 (10827) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2022-04-24 21:13:06.267 - error: zigbee.0 (10827) unhandled promise rejection: Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00'
2022-04-24 21:13:06.268 - error: zigbee.0 (10827) Error: Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00'
at SerialPort. (/opt/iobroker/node_modules/zigbee-herdsman/src/adapter/deconz/driver/driver.ts:182:28)
at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
2022-04-24 21:13:06.268 - error: zigbee.0 (10827) Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2451654-if00'
2022-04-24 21:13:06.283 - info: zigbee.0 (10827) cleaned everything up...
2022-04-24 21:13:06.286 - info: zigbee.0 (10827) Zigbee: disabling joining new devices.
2022-04-24 21:13:06.290 - info: zigbee.0 (10827) terminating
2022-04-24 21:13:06.292 - warn: zigbee.0 (10827) Terminated (UNCAUGHT_EXCEPTION): Without reason

[Thomas Braun]

@dunadanlk

Hast du eigentlich deconz zuvor gestoppt oder deinstalliert?

[Dunadanlk]

@thomas-braun erst nicht... Als es nicht funktionierte habe ich erst zigbee deinstalliert, dann deconz deinstalliert und dann zigbee wieder installiert. Brachte aber keine Veränderung

[Thomas Braun]

@dunadanlk

systemctl status deconz deconz-gui

[Dunadanlk]

@thomas-braun

● deconz.service - deCONZ: ZigBee gateway -- REST API
Loaded: loaded (/lib/systemd/system/deconz.service; enabled; vendor preset: enabled)
Active: active (running) since Sun 2022-04-24 14:17:04 CEST; 7h ago
Main PID: 407 (deCONZ)
Tasks: 4 (limit: 4915)
CGroup: /system.slice/deconz.service
└─407 /usr/bin/deCONZ -platform minimal --http-port=80

Apr 24 14:17:04 raspberrypi systemd[1]: Started deCONZ: ZigBee gateway -- REST API.
Apr 24 14:17:05 raspberrypi deCONZ[407]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-pi'
Apr 24 14:17:06 raspberrypi deCONZ[407]: libpng warning: iCCP: known incorrect sRGB profile
Apr 24 14:17:07 raspberrypi deCONZ[407]: This plugin does not support propagateSizeHints()
Apr 24 14:17:07 raspberrypi deCONZ[407]: This plugin does not support propagateSizeHints()
Apr 24 14:17:09 raspberrypi deCONZ[407]: This plugin does not support propagateSizeHints()

● deconz-gui.service - deCONZ: ZigBee gateway -- GUI/REST API
Loaded: loaded (/lib/systemd/system/deconz-gui.service; disabled; vendor preset: enabled)
Active: inactive (dead)

Apr 24 21:30:24 raspberrypi systemd[1]: /lib/systemd/system/deconz-gui.service:10: Unknown lvalue 'StartLimitIntervalSec' in section 'Service', ignoring
Apr 24 21:32:52 raspberrypi systemd[1]: /lib/systemd/system/deconz-gui.service:10: Unknown lvalue 'StartLimitIntervalSec' in section 'Service', ignoring

[Thomas Braun]

@dunadanlk

deconz läuft noch

sudo systemctl stop deconz
sudo systemctl disable deconz

Bitte setze Konsolenoutput in CodeTags.

[Dunadanlk]

@thomas-braun ....verrückt.. danke... Scheint alles zu funktionieren wie es soll. pairing läuft. also für dummys, der Fehler war letztlich, dass ich Deconz vor dem deinstallieren im IOB hätte... Stoppen müssen? Grüße

[Thomas Braun]

@dunadanlk

Der Service lief noch. Es kann auf ein serielles Gerät immer nur ein Prozess zugreifen.