NEWS
[Neuer Adapter] EuSec
-
@bean Danke für die info, gut zu wissen :-) mal schauen ob mein Adapter dann auch wieder läuft. oder ich muss mal neu installieren. Im Log bekomme ich bei jedem Startversuch einen 401 Fehler
-
@gonzokalle
Ich habe im Flur einen Taster den ich Drücke, damit die Kamera im Eingangsbereich für eine Minute deaktiviert wird, wenn ich den Müll rausbringe :grin:
Wobei ich es mittlerweile eleganter mit einem Türkontakt gelöst habe...@bishop9191
Das ist eine gute Idee mit dem Türkontakt. Magst du eventuell die Blicklys dafür posten? -
@bishop9191
Das ist eine gute Idee mit dem Türkontakt. Magst du eventuell die Blicklys dafür posten?Beim Öffnen der Haustür schalte ich den Modus um. Aber nur wenn vorher keine Bewegung erkannt wurde und natürlich auch nur wenn jemand Zuhause ist.
Beim Schließen der Tür wird wieder in den Überwachungsmodus geschaltet, aber eben nur, wenn vorher automatisch über den Türkontakt inaktiv geschaltet wurde.
Ich habe noch eine 30sek Verzögerung beim wieder aktiv schalten eingebaut, wenn man z.B den Besuch aus dem Haus lässt, muss das ja auch nicht aufgenommen werden. Nach 30sek nach dem Schließen sollten sie dann hoffenltich den Bereich verlassen haben :sweat_smile: -
Dann bedeutet Diele_Haustür_Kontakt wahr, dass die Tür offen ist?
Guard Mode 3, dass die Kamera deaktiviert ist?Soweit bin ich jetzt.
Schalte zwischen Zeitsteuerung und Abwesend um.
-
Dann bedeutet Diele_Haustür_Kontakt wahr, dass die Tür offen ist?
Guard Mode 3, dass die Kamera deaktiviert ist?Soweit bin ich jetzt.
Schalte zwischen Zeitsteuerung und Abwesend um.@gonzokalle Genau :+1:
-
@cash möchte auch gern einfach nur dass das bild per telegram gesendet wird, wenn der adapter eine bewegung erkennt. 2 faktor hab ich nun mal ausgeschaltet. Kamera ist eufy 2c.
Blockly:
Funktioniert das mittlerweile?
@marko1974 sagte in [Neuer Adapter] EuSec:
@cash möchte auch gern einfach nur dass das bild per telegram gesendet wird, wenn der adapter eine bewegung erkennt. 2 faktor hab ich nun mal ausgeschaltet. Kamera ist eufy 2c.
Blockly:Funktioniert das mittlerweile?
Als Anfänger schließe ich mich der Frage mal an. Ich habe es nicht hinbekommen.
Welche DP eigenen sich für die Vis und welche für Telegram?
Wie muss dafür das Blockly aussehen? -
Ich hatte menen Eufy security adapter gelöscht und den eusec installiert. Ziel war eigentlich ein erfasstes pic über telegram zu versenden.
Jetzt gibts mehr proble als vorher. Was ist denn da falsch gelaufen und wie fixe ich das?2022-03-06 15:38:47.623 - info: host.openhab iobroker npm-rebuild: exit 0 2022-03-06 15:38:48.129 - warn: web.0 (16317) Terminated (-100): Without reason 2022-03-06 15:38:48.249 - info: host.openhab instance system.adapter.eusec.0 started with pid 22510 2022-03-06 15:38:49.148 - info: host.openhab instance system.adapter.web.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2022-03-06 15:38:49.149 - info: host.openhab Restart adapter system.adapter.web.0 because enabled 2022-03-06 15:38:50.448 - info: host.openhab instance system.adapter.web.0 started with pid 22529 2022-03-06 15:38:50.926 - error: host.openhab Caught by controller[0]: internal/modules/cjs/loader.js:303 2022-03-06 15:38:50.927 - error: host.openhab Caught by controller[0]: throw err; 2022-03-06 15:38:50.927 - error: host.openhab Caught by controller[0]: ^ 2022-03-06 15:38:50.928 - error: host.openhab Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/eufy-security-client/build/index.js'. Please verify that the package.json has a valid "main" entry 2022-03-06 15:38:50.928 - error: host.openhab Caught by controller[0]: at tryPackage (internal/modules/cjs/loader.js:295:19) 2022-03-06 15:38:50.929 - error: host.openhab Caught by controller[0]: at Function.Module._findPath (internal/modules/cjs/loader.js:508:18) 2022-03-06 15:38:50.929 - error: host.openhab Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:802:27) 2022-03-06 15:38:50.930 - error: host.openhab Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:667:27) 2022-03-06 15:38:50.930 - error: host.openhab Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2022-03-06 15:38:50.931 - error: host.openhab Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2022-03-06 15:38:50.931 - error: host.openhab Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.eusec/build/main.js:31:32) 2022-03-06 15:38:50.932 - error: host.openhab Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2022-03-06 15:38:50.932 - error: host.openhab Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) { 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: path: '/opt/iobroker/node_modules/eufy-security-client/package.json', 2022-03-06 15:38:50.934 - error: host.openhab Caught by controller[0]: requestPath: 'eufy-security-client' 2022-03-06 15:38:50.934 - error: host.openhab Caught by controller[0]: } 2022-03-06 15:38:50.935 - error: host.openhab instance system.adapter.eusec.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2022-03-06 15:38:50.935 - info: host.openhab Rebuild for adapter system.adapter.eusec.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually. -
Ich hatte menen Eufy security adapter gelöscht und den eusec installiert. Ziel war eigentlich ein erfasstes pic über telegram zu versenden.
Jetzt gibts mehr proble als vorher. Was ist denn da falsch gelaufen und wie fixe ich das?2022-03-06 15:38:47.623 - info: host.openhab iobroker npm-rebuild: exit 0 2022-03-06 15:38:48.129 - warn: web.0 (16317) Terminated (-100): Without reason 2022-03-06 15:38:48.249 - info: host.openhab instance system.adapter.eusec.0 started with pid 22510 2022-03-06 15:38:49.148 - info: host.openhab instance system.adapter.web.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2022-03-06 15:38:49.149 - info: host.openhab Restart adapter system.adapter.web.0 because enabled 2022-03-06 15:38:50.448 - info: host.openhab instance system.adapter.web.0 started with pid 22529 2022-03-06 15:38:50.926 - error: host.openhab Caught by controller[0]: internal/modules/cjs/loader.js:303 2022-03-06 15:38:50.927 - error: host.openhab Caught by controller[0]: throw err; 2022-03-06 15:38:50.927 - error: host.openhab Caught by controller[0]: ^ 2022-03-06 15:38:50.928 - error: host.openhab Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/eufy-security-client/build/index.js'. Please verify that the package.json has a valid "main" entry 2022-03-06 15:38:50.928 - error: host.openhab Caught by controller[0]: at tryPackage (internal/modules/cjs/loader.js:295:19) 2022-03-06 15:38:50.929 - error: host.openhab Caught by controller[0]: at Function.Module._findPath (internal/modules/cjs/loader.js:508:18) 2022-03-06 15:38:50.929 - error: host.openhab Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:802:27) 2022-03-06 15:38:50.930 - error: host.openhab Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:667:27) 2022-03-06 15:38:50.930 - error: host.openhab Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2022-03-06 15:38:50.931 - error: host.openhab Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2022-03-06 15:38:50.931 - error: host.openhab Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.eusec/build/main.js:31:32) 2022-03-06 15:38:50.932 - error: host.openhab Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2022-03-06 15:38:50.932 - error: host.openhab Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) { 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2022-03-06 15:38:50.933 - error: host.openhab Caught by controller[0]: path: '/opt/iobroker/node_modules/eufy-security-client/package.json', 2022-03-06 15:38:50.934 - error: host.openhab Caught by controller[0]: requestPath: 'eufy-security-client' 2022-03-06 15:38:50.934 - error: host.openhab Caught by controller[0]: } 2022-03-06 15:38:50.935 - error: host.openhab instance system.adapter.eusec.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2022-03-06 15:38:50.935 - info: host.openhab Rebuild for adapter system.adapter.eusec.0 not successful in 3 tries. Adapter will not be restarted again. Please execute "npm install --production" in adapter directory manually.Was genau wie installiert?
-
@thomas-braun über die admin console eufy-security deinstalliert und einfach eu-sec installiert
@marko1974 sagte in [Neuer Adapter] EuSec:
einfach eu-sec
Woher? Über github? Über ein Repo? Ganz woanders her?
Du sprichst von dem hier: -
@marko1974 sagte in [Neuer Adapter] EuSec:
einfach eu-sec
Woher? Über github? Über ein Repo? Ganz woanders her?
Du sprichst von dem hier:@thomas-braun von dem spreche ich, ja....den hab ich einfach aus dem stable genommen...also unter der Oberfläche von iobroker installiert. neustart beschert nun das hier
2022-03-06 15:50:24.626 - error: host.openhab Caught by controller[0]: internal/modules/cjs/loader.js:303 2022-03-06 15:50:24.626 - error: host.openhab Caught by controller[0]: throw err; 2022-03-06 15:50:24.630 - error: host.openhab Caught by controller[0]: ^ 2022-03-06 15:50:24.632 - error: host.openhab Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/eufy-security-client/build/index.js'. Please verify that the package.json has a valid "main" entry 2022-03-06 15:50:24.633 - error: host.openhab Caught by controller[0]: at tryPackage (internal/modules/cjs/loader.js:295:19) 2022-03-06 15:50:24.634 - error: host.openhab Caught by controller[0]: at Function.Module._findPath (internal/modules/cjs/loader.js:508:18) 2022-03-06 15:50:24.635 - error: host.openhab Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:802:27) 2022-03-06 15:50:24.635 - error: host.openhab Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:667:27) 2022-03-06 15:50:24.636 - error: host.openhab Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2022-03-06 15:50:24.639 - error: host.openhab Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2022-03-06 15:50:24.640 - error: host.openhab Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.eusec/build/main.js:31:32) 2022-03-06 15:50:24.641 - error: host.openhab Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2022-03-06 15:50:24.641 - error: host.openhab Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2022-03-06 15:50:24.642 - error: host.openhab Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) { 2022-03-06 15:50:24.642 - error: host.openhab Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2022-03-06 15:50:24.643 - error: host.openhab Caught by controller[0]: path: '/opt/iobroker/node_modules/eufy-security-client/package.json', 2022-03-06 15:50:24.644 - error: host.openhab Caught by controller[0]: requestPath: 'eufy-security-client' 2022-03-06 15:50:24.644 - error: host.openhab Caught by controller[0]: } 2022-03-06 15:50:24.646 - error: host.openhab instance system.adapter.eusec.0 terminated with code 1 (JS_CONTROLLER_STOPPED)zusätzlich läuft jetzt irgendwie immer ein rebuild durch in schleife
host.openhab 2022-03-06 15:56:20.221 info iobroker npm-rebuild: > sharp@0.28.1 install /opt/iobroker/node_modules/sharp> (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy) host.openhab 2022-03-06 15:56:20.220 info iobroker npm-rebuild: host.openhab 2022-03-06 15:56:19.950 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird verlassen host.openhab 2022-03-06 15:56:19.905 info iobroker npm-rebuild: COPY Release/noble.node host.openhab 2022-03-06 15:56:19.438 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/noble.node host.openhab 2022-03-06 15:56:19.430 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird betreten host.openhab 2022-03-06 15:56:16.832 info iobroker npm-rebuild: > @abandonware/noble@1.9.2-15 install /opt/iobroker/node_modules/@abandonware/noble> node-gyp rebuild host.openhab 2022-03-06 15:56:15.538 info iobroker npm-rebuild: [@abandonware/bluetooth-hci-socket] Success: "/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node" already installedPass --update-binary to reinstall or --build-from-source to recompile host.openhab 2022-03-06 15:56:13.846 info iobroker npm-rebuild: COPY Release/uwrap.nodemake: Verzeichnis „/opt/iobroker/node_modules/usocket/build“ wird verlassen> @abandonware/bluetooth-hci-socket@0.5.3-8 install /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket> node-pre-gyp install --fallback-to-build host.openhab 2022-03-06 15:56:11.137 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/uwrap.node host.openhab 2022-03-06 15:55:55.908 info iobroker npm-rebuild: CXX(target) Release/obj.target/uwrap/src/uwrap.o host.openhab 2022-03-06 15:55:55.886 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/usocket/build“ wird betreten host.openhab 2022-03-06 15:55:52.530 info iobroker npm-rebuild: > usocket@0.3.0 install /opt/iobroker/node_modules/usocket> node-gyp rebuild host.openhab 2022-03-06 15:55:52.416 info iobroker npm-rebuild: ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. host.openhab 2022-03-06 15:55:40.108 info iobroker npm-rebuild: > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional> node rebuild.js host.openhab 2022-03-06 15:55:40.016 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird verlassen host.openhab 2022-03-06 15:55:39.935 info iobroker npm-rebuild: COPY Release/unix_dgram.node host.openhab 2022-03-06 15:55:39.389 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/unix_dgram.node host.openhab 2022-03-06 15:55:31.082 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird betreten CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o host.openhab 2022-03-06 15:55:27.172 info iobroker npm-rebuild: > unix-dgram@2.0.4 install /opt/iobroker/node_modules/unix-dgram> node-gyp rebuild host.openhab 2022-03-06 15:55:27.000 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/raw-socket/build“ wird verlassen host.openhab 2022-03-06 15:55:26.947 info iobroker npm-rebuild: COPY Release/raw.node host.openhab 2022-03-06 15:55:26.449 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/raw.node host.openhab 2022-03-06 15:55:16.785 info iobroker npm-rebuild: CXX(target) Release/obj.target/raw/src/raw.o host.openhab 2022-03-06 15:55:16.774 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/raw-socket/build“ wird betreten host.openhab 2022-03-06 15:55:13.640 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.nodemake: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird verlassen> raw-socket@1.7.0 install /opt/iobroker/node_modules/raw-socket> node-gyp rebuild host.openhab 2022-03-06 15:55:10.630 info iobroker npm-rebuild: CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o host.openhab 2022-03-06 15:55:04.251 info iobroker npm-rebuild: CXX(target) Release/obj.target/diskusage/src/main.o host.openhab 2022-03-06 15:55:04.246 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird betreten host.openhab 2022-03-06 15:55:00.383 info iobroker npm-rebuild: > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage> node-gyp rebuild host.openhab 2022-03-06 15:55:00.381 info iobroker npm-rebuild: host.openhab 2022-03-06 15:54:59.628 info iobroker npm-rebuild: > @root/acme@3.1.0 postinstall /opt/iobroker/node_modules/@root/acme> node scripts/postinstall host.openhab 2022-03-06 15:54:59.626 info iobroker npm-rebuild: host.openhab 2022-03-06 15:54:57.458 info iobroker npm-rebuild: > nodemon@2.0.15 postinstall /opt/iobroker/node_modules/nodemon> node bin/postinstall || exit 0 vis.0 2022-03-06 15:54:54.661 info Terminated (NO_ERROR): Without reason vis.0 2022-03-06 15:54:53.540 info vis license is OK. vis.0 2022-03-06 15:54:53.246 info starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.vis, node: v12.22.7, js-controller: 4.0.18 -
@thomas-braun von dem spreche ich, ja....den hab ich einfach aus dem stable genommen...also unter der Oberfläche von iobroker installiert. neustart beschert nun das hier
2022-03-06 15:50:24.626 - error: host.openhab Caught by controller[0]: internal/modules/cjs/loader.js:303 2022-03-06 15:50:24.626 - error: host.openhab Caught by controller[0]: throw err; 2022-03-06 15:50:24.630 - error: host.openhab Caught by controller[0]: ^ 2022-03-06 15:50:24.632 - error: host.openhab Caught by controller[0]: Error: Cannot find module '/opt/iobroker/node_modules/eufy-security-client/build/index.js'. Please verify that the package.json has a valid "main" entry 2022-03-06 15:50:24.633 - error: host.openhab Caught by controller[0]: at tryPackage (internal/modules/cjs/loader.js:295:19) 2022-03-06 15:50:24.634 - error: host.openhab Caught by controller[0]: at Function.Module._findPath (internal/modules/cjs/loader.js:508:18) 2022-03-06 15:50:24.635 - error: host.openhab Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:802:27) 2022-03-06 15:50:24.635 - error: host.openhab Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:667:27) 2022-03-06 15:50:24.636 - error: host.openhab Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2022-03-06 15:50:24.639 - error: host.openhab Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2022-03-06 15:50:24.640 - error: host.openhab Caught by controller[0]: at Object. (/opt/iobroker/node_modules/iobroker.eusec/build/main.js:31:32) 2022-03-06 15:50:24.641 - error: host.openhab Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2022-03-06 15:50:24.641 - error: host.openhab Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2022-03-06 15:50:24.642 - error: host.openhab Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) { 2022-03-06 15:50:24.642 - error: host.openhab Caught by controller[0]: code: 'MODULE_NOT_FOUND', 2022-03-06 15:50:24.643 - error: host.openhab Caught by controller[0]: path: '/opt/iobroker/node_modules/eufy-security-client/package.json', 2022-03-06 15:50:24.644 - error: host.openhab Caught by controller[0]: requestPath: 'eufy-security-client' 2022-03-06 15:50:24.644 - error: host.openhab Caught by controller[0]: } 2022-03-06 15:50:24.646 - error: host.openhab instance system.adapter.eusec.0 terminated with code 1 (JS_CONTROLLER_STOPPED)zusätzlich läuft jetzt irgendwie immer ein rebuild durch in schleife
host.openhab 2022-03-06 15:56:20.221 info iobroker npm-rebuild: > sharp@0.28.1 install /opt/iobroker/node_modules/sharp> (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy) host.openhab 2022-03-06 15:56:20.220 info iobroker npm-rebuild: host.openhab 2022-03-06 15:56:19.950 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird verlassen host.openhab 2022-03-06 15:56:19.905 info iobroker npm-rebuild: COPY Release/noble.node host.openhab 2022-03-06 15:56:19.438 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/noble.node host.openhab 2022-03-06 15:56:19.430 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird betreten host.openhab 2022-03-06 15:56:16.832 info iobroker npm-rebuild: > @abandonware/noble@1.9.2-15 install /opt/iobroker/node_modules/@abandonware/noble> node-gyp rebuild host.openhab 2022-03-06 15:56:15.538 info iobroker npm-rebuild: [@abandonware/bluetooth-hci-socket] Success: "/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/lib/binding/bluetooth_hci_socket.node" already installedPass --update-binary to reinstall or --build-from-source to recompile host.openhab 2022-03-06 15:56:13.846 info iobroker npm-rebuild: COPY Release/uwrap.nodemake: Verzeichnis „/opt/iobroker/node_modules/usocket/build“ wird verlassen> @abandonware/bluetooth-hci-socket@0.5.3-8 install /opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket> node-pre-gyp install --fallback-to-build host.openhab 2022-03-06 15:56:11.137 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/uwrap.node host.openhab 2022-03-06 15:55:55.908 info iobroker npm-rebuild: CXX(target) Release/obj.target/uwrap/src/uwrap.o host.openhab 2022-03-06 15:55:55.886 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/usocket/build“ wird betreten host.openhab 2022-03-06 15:55:52.530 info iobroker npm-rebuild: > usocket@0.3.0 install /opt/iobroker/node_modules/usocket> node-gyp rebuild host.openhab 2022-03-06 15:55:52.416 info iobroker npm-rebuild: ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. host.openhab 2022-03-06 15:55:40.108 info iobroker npm-rebuild: > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional> node rebuild.js host.openhab 2022-03-06 15:55:40.016 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird verlassen host.openhab 2022-03-06 15:55:39.935 info iobroker npm-rebuild: COPY Release/unix_dgram.node host.openhab 2022-03-06 15:55:39.389 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/unix_dgram.node host.openhab 2022-03-06 15:55:31.082 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/unix-dgram/build“ wird betreten CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o host.openhab 2022-03-06 15:55:27.172 info iobroker npm-rebuild: > unix-dgram@2.0.4 install /opt/iobroker/node_modules/unix-dgram> node-gyp rebuild host.openhab 2022-03-06 15:55:27.000 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/raw-socket/build“ wird verlassen host.openhab 2022-03-06 15:55:26.947 info iobroker npm-rebuild: COPY Release/raw.node host.openhab 2022-03-06 15:55:26.449 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/raw.node host.openhab 2022-03-06 15:55:16.785 info iobroker npm-rebuild: CXX(target) Release/obj.target/raw/src/raw.o host.openhab 2022-03-06 15:55:16.774 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/raw-socket/build“ wird betreten host.openhab 2022-03-06 15:55:13.640 info iobroker npm-rebuild: SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.nodemake: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird verlassen> raw-socket@1.7.0 install /opt/iobroker/node_modules/raw-socket> node-gyp rebuild host.openhab 2022-03-06 15:55:10.630 info iobroker npm-rebuild: CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o host.openhab 2022-03-06 15:55:04.251 info iobroker npm-rebuild: CXX(target) Release/obj.target/diskusage/src/main.o host.openhab 2022-03-06 15:55:04.246 info iobroker npm-rebuild: make: Verzeichnis „/opt/iobroker/node_modules/diskusage/build“ wird betreten host.openhab 2022-03-06 15:55:00.383 info iobroker npm-rebuild: > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage> node-gyp rebuild host.openhab 2022-03-06 15:55:00.381 info iobroker npm-rebuild: host.openhab 2022-03-06 15:54:59.628 info iobroker npm-rebuild: > @root/acme@3.1.0 postinstall /opt/iobroker/node_modules/@root/acme> node scripts/postinstall host.openhab 2022-03-06 15:54:59.626 info iobroker npm-rebuild: host.openhab 2022-03-06 15:54:57.458 info iobroker npm-rebuild: > nodemon@2.0.15 postinstall /opt/iobroker/node_modules/nodemon> node bin/postinstall || exit 0 vis.0 2022-03-06 15:54:54.661 info Terminated (NO_ERROR): Without reason vis.0 2022-03-06 15:54:53.540 info vis license is OK. vis.0 2022-03-06 15:54:53.246 info starting. Version 1.4.5 in /opt/iobroker/node_modules/iobroker.vis, node: v12.22.7, js-controller: 4.0.18@marko1974 sagte in [Neuer Adapter] EuSec:
node: v12.22.7
Ich würde mal langsame (nee, eher schnell) auf die vorgesehene Version 14 wechseln.
Auf meinem Test-System wird der ganz brav installiert:
2022-03-06 15:55:00.815 - info: host.chet iobroker add eusec auto --host chet 2022-03-06 15:55:04.190 - info: host.chet iobroker NPM version: 8.5.1 2022-03-06 15:55:04.194 - info: host.chet iobroker Installing iobroker.eusec@0.8.5... (System call) 2022-03-06 15:55:38.040 - info: host.chet iobroker 2022-03-06 15:55:38.044 - info: host.chet iobroker added 40 packages in 33s53 packages are looking for funding run `npm fund` for details 2022-03-06 15:55:38.116 - info: host.chet iobroker host.chet install adapter eusec 2022-03-06 15:55:38.171 - info: host.chet iobroker upload [14] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/eusec.png eusec.png image/png 2022-03-06 15:55:38.250 - info: host.chet iobroker upload [13] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/de/translations.json i18n/de/translations.json application/json 2022-03-06 15:55:38.262 - info: host.chet iobroker upload [12] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/en/translations.json i18n/en/translations.json application/json 2022-03-06 15:55:44.483 - info: host.chet iobroker upload [11] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/es/translations.json i18n/es/translations.json application/json 2022-03-06 15:55:44.512 - info: host.chet iobroker upload [10] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/fr/translations.json i18n/fr/translations.json application/json 2022-03-06 15:55:44.535 - info: host.chet iobroker upload [9] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/it/translations.json i18n/it/translations.json application/json 2022-03-06 15:55:44.546 - info: host.chet iobroker upload [8] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/nl/translations.json i18n/nl/translations.json application/json 2022-03-06 15:55:44.559 - info: host.chet iobroker upload [7] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/pl/translations.json i18n/pl/translations.json application/json 2022-03-06 15:55:44.572 - info: host.chet iobroker upload [6] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/pt/translations.json i18n/pt/translations.json application/json 2022-03-06 15:55:44.589 - info: host.chet iobroker upload [5] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/ru/translations.json i18n/ru/translations.json application/json 2022-03-06 15:55:45.816 - info: host.chet iobroker upload [4] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json 2022-03-06 15:55:45.832 - info: host.chet iobroker upload [3] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/index_m.html index_m.html text/html 2022-03-06 15:55:45.845 - info: host.chet iobroker upload [2] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/jsonConfig.json jsonConfig.json application/json 2022-03-06 15:55:45.856 - info: host.chet iobroker upload [1] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/style.css style.css text/css 2022-03-06 15:55:45.867 - info: host.chet iobroker upload [0] eusec.admin /opt/iobroker/node_modules/iobroker.eusec/admin/words.js words.js application/javascript 2022-03-06 15:55:46.002 - info: host.chet iobroker host.chet object system.adapter.eusec created/updated 2022-03-06 15:55:46.014 - warn: web.0 (77575) Terminated (-100): Without reason 2022-03-06 15:55:46.086 - info: host.chet iobroker host.chet create instance eusec 2022-03-06 15:55:46.099 - info: host.chet iobroker host.chet object system.adapter.eusec.0.alive created 2022-03-06 15:55:46.114 - info: host.chet iobroker host.chet object system.adapter.eusec.0.connected created 2022-03-06 15:55:46.131 - info: host.chet iobroker host.chet object system.adapter.eusec.0.compactMode created 2022-03-06 15:55:46.145 - info: host.chet iobroker host.chet object system.adapter.eusec.0.cpu created 2022-03-06 15:55:46.160 - info: host.chet iobroker host.chet object system.adapter.eusec.0.cputime created 2022-03-06 15:55:46.176 - info: host.chet iobroker host.chet object system.adapter.eusec.0.memHeapUsed created 2022-03-06 15:55:46.190 - info: host.chet iobroker host.chet object system.adapter.eusec.0.memHeapTotal created 2022-03-06 15:55:46.204 - info: host.chet iobroker host.chet object system.adapter.eusec.0.memRss created 2022-03-06 15:55:46.221 - info: host.chet iobroker host.chet object system.adapter.eusec.0.uptime created 2022-03-06 15:55:46.235 - info: host.chet iobroker host.chet object system.adapter.eusec.0.inputCount created 2022-03-06 15:55:46.249 - info: host.chet iobroker host.chet object system.adapter.eusec.0.outputCount created 2022-03-06 15:55:46.263 - info: host.chet iobroker host.chet object system.adapter.eusec.0.eventLoopLag created 2022-03-06 15:55:46.275 - info: host.chet iobroker host.chet object system.adapter.eusec.0.sigKill created 2022-03-06 15:55:46.288 - info: host.chet iobroker host.chet object system.adapter.eusec.0.logLevel created 2022-03-06 15:55:46.299 - info: host.chet iobroker host.chet object eusec.0 created 2022-03-06 15:55:46.360 - info: host.chet iobroker host.chet object system.adapter.eusec.0 created 2022-03-06 15:55:46.651 - info: host.chet instance system.adapter.web.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2022-03-06 15:55:46.651 - info: host.chet Restart adapter system.adapter.web.0 because enabled 2022-03-06 15:55:47.393 - info: host.chet iobroker exit 0 2022-03-06 15:55:47.749 - info: host.chet instance system.adapter.web.0 started with pid 84925 2022-03-06 15:55:49.421 - info: host.chet instance system.adapter.eusec.0 started with pid 84936 2022-03-06 15:55:57.123 - info: eusec.0 (84936) starting. Version 0.8.5 in /opt/iobroker/node_modules/iobroker.eusec, node: v17.6.0, js-controller: 4.0.19 2022-03-06 15:55:59.175 - error: eusec.0 (84936) Response code not ok [{"code":10000,"msg":"Anfrage fehlgeschlagen."}] 2022-03-06 15:55:59.176 - error: eusec.0 (84936) Token error -
@thomas-braun update den gerade....mal sehen
@marko1974 sagte in [Neuer Adapter] EuSec:
update den gerade....mal sehen
Den Adapter oder die veraltete nodeJS-Installation?
-
@thomas-braun die veraltete nodeJS
Mit
sudo ln -s /usr/bin/node /usr/bin/nodejs which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejsdann schauen ob das alles senkrecht im System hängt.
-
Mit
sudo ln -s /usr/bin/node /usr/bin/nodejs which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejsdann schauen ob das alles senkrecht im System hängt.
@thomas-braun said in [Neuer Adapter] EuSec:
which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
[16:16:01] openhabian@openhab:/opt/iobroker$ sudo ln -s /usr/bin/node /usr/bin/n odejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits [16:17:07] openhabian@openhab:/opt/iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.19.0 v14.19.0 6.14.16 openhabian /opt/iobroker [16:15:56] openhabian@openhab:/opt/iobroker$ iobroker start [16:16:01] openhabian@openhab:/opt/iobroker$ sudo ln -s /usr/bin/node /usr/bin/n odejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits [16:17:07] openhabian@openhab:/opt/iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.19.0 v14.19.0 6.14.16 openhabian /opt/iobroker OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://phoscon.de/apt/deconz buster-beta InRelease OK:3 http://archive.raspberrypi.org/debian buster InRelease OK:4 https://deb.nodesource.com/node_14.x buster InRelease OK:5 https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 26 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. nodejs: Installiert: 14.19.0-deb-1nodesource1 Installationskandidat: 14.19.0-deb-1nodesource1 Versionstabelle: *** 14.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [16:17:59] openhabian@openhab:/opt/iobroker$ [16:15:56] openhabian@openhab:/opt/ iobroker$ iobroker start -bash: [16:15:56]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ [16:16:01] openhabian@openhab:/opt/ iobroker$ sudo ln -s /usr/bin/node /usr/bin/nodejs -bash: [16:16:01]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ ln: die symbolische Verknüpfung '/u sr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits -bash: ln:: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ [16:17:07] openhabian@openhab:/opt/ iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && p wd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs -bash: [16:17:07]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ /usr/bin/nodejs Welcome to Node.js v14.19.0. Type ".help" for more information. > /usr/bin/node /usr/bin/node ^ Uncaught SyntaxError: Invalid regular expression flags > /usr/bin/npm /usr/bin/npm ^ Uncaught SyntaxError: Invalid regular expression flags > v14.19.0 v14.19.0 ^^^ Uncaught SyntaxError: Unexpected number > v14.19.0 v14.19.0 ^^^ Uncaught SyntaxError: Unexpected number > 6.14.16 6.14.16 ^^^ Uncaught SyntaxError: Unexpected number > openhabian Uncaught ReferenceError: openhabian is not defined > /opt/iobroker /opt/iobroker ^ Uncaught SyntaxError: Invalid regular expression flags > -
@thomas-braun said in [Neuer Adapter] EuSec:
which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
[16:16:01] openhabian@openhab:/opt/iobroker$ sudo ln -s /usr/bin/node /usr/bin/n odejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits [16:17:07] openhabian@openhab:/opt/iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.19.0 v14.19.0 6.14.16 openhabian /opt/iobroker [16:15:56] openhabian@openhab:/opt/iobroker$ iobroker start [16:16:01] openhabian@openhab:/opt/iobroker$ sudo ln -s /usr/bin/node /usr/bin/n odejs ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits [16:17:07] openhabian@openhab:/opt/iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo ap t update && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.19.0 v14.19.0 6.14.16 openhabian /opt/iobroker OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://phoscon.de/apt/deconz buster-beta InRelease OK:3 http://archive.raspberrypi.org/debian buster InRelease OK:4 https://deb.nodesource.com/node_14.x buster InRelease OK:5 https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 26 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. nodejs: Installiert: 14.19.0-deb-1nodesource1 Installationskandidat: 14.19.0-deb-1nodesource1 Versionstabelle: *** 14.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [16:17:59] openhabian@openhab:/opt/iobroker$ [16:15:56] openhabian@openhab:/opt/ iobroker$ iobroker start -bash: [16:15:56]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ [16:16:01] openhabian@openhab:/opt/ iobroker$ sudo ln -s /usr/bin/node /usr/bin/nodejs -bash: [16:16:01]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ ln: die symbolische Verknüpfung '/u sr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits -bash: ln:: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ [16:17:07] openhabian@openhab:/opt/ iobroker$ which nodejs node npm && nodejs -v && node -v && npm -v && whoami && p wd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs -bash: [16:17:07]: Kommando nicht gefunden. [16:18:00] openhabian@openhab:/opt/iobroker$ /usr/bin/nodejs Welcome to Node.js v14.19.0. Type ".help" for more information. > /usr/bin/node /usr/bin/node ^ Uncaught SyntaxError: Invalid regular expression flags > /usr/bin/npm /usr/bin/npm ^ Uncaught SyntaxError: Invalid regular expression flags > v14.19.0 v14.19.0 ^^^ Uncaught SyntaxError: Unexpected number > v14.19.0 v14.19.0 ^^^ Uncaught SyntaxError: Unexpected number > 6.14.16 6.14.16 ^^^ Uncaught SyntaxError: Unexpected number > openhabian Uncaught ReferenceError: openhabian is not defined > /opt/iobroker /opt/iobroker ^ Uncaught SyntaxError: Invalid regular expression flags >@marko1974 sagte in [Neuer Adapter] EuSec:
Okay, soweit schaut das sauber aus.
Die
Aktualisierung für 26 Pakete verfügbar.
würde ich aber auch noch eintüten.
-
@marko1974 sagte in [Neuer Adapter] EuSec:
Okay, soweit schaut das sauber aus.
Die
Aktualisierung für 26 Pakete verfügbar.
würde ich aber auch noch eintüten.
-
@thomas-braun also bisher läuft da nichts sauber....immer noch das gleiche wie vorher
eintüten?
sudo apt update sudo apt full-upgrade sudo reboot
Support us
912
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge