Modbus über USB RS485

wendy2702

@ostseeskipper sagte in Modbus über USB RS485:

@wendy2702
Bin ich wohl zu blöd zu löschen
kein verzeichnis aber es ist da


pi@iobroker-pi:/opt/iobroker/node_modules $ rm -r /serialport
rm: cannot remove '/serialport': No such file or directory
pi@iobroker-pi:/opt/iobroker/node_modules $ cd serialport
pi@iobroker-pi:/opt/iobroker/node_modules/serialport $


rm -r serialport

ostseeskipper

@wendy2702
Krass über all wo ich geschaut hatte war das /
Danke:+1:

ostseeskipper

@wendy2702
und immer wieder was neues


   ╭───────────────────────────────────────────────────────────────╮
   │                                                               │
   │      New major version of npm available! 6.14.16 → 8.4.1      │
   │   Changelog: https://github.com/npm/cli/releases/tag/v8.4.1   │
   │               Run npm install -g npm to update!               │
   │                                                               │
   ╰───────────────────────────────────────────────────────────────╯

will ich da ne Version 8.4.1 ?

wendy2702

@ostseeskipper Nein.

Willst du nicht.

ostseeskipper

@wendy2702
und wie sag ich nun das ich die 6.14.16 will

wendy2702 · @wendy2702 und wie sag ich nun das ich die 6.14.16 will

@ostseeskipper in dem du das angegebene update Kommando nicht ausführst bleibt es bei der NPM Version die du hast.

Das ist nur ein Hinweis das es was neues gibt

ostseeskipper

@wendy2702
nun läuft es und iobroker fix hinterher schieben?

wendy2702

@ostseeskipper Kannst du, musst du aber nicht.

ostseeskipper

@wendy2702
nun hab ich noch mal geschaut mit "dir"
es ist kein Verzeichnis serialport und @serialport da.

wendy2702

@ostseeskipper bin gerade verwirrt?

Läuft der Modbus jetzt oder nicht?

Was zeigt

npm list serialport

Im iobroker Verzeichnis ausgeführt?

ostseeskipper

@wendy2702
Nein. In einem unterverzeichnis davon.

War es ziemlich bunt beim rebuild. Vor allem bei Serial

Installing NodeJS typings...
latest @types: 17, installed node: 14

> @serialport/bindings@9.2.8 install /opt/iobroker/node_modules/iobroker.javascript/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=14.19.0 runtime=node arch=arm libc= platform=linux)
make: Entering directory '/opt/iobroker/node_modules/iobroker.javascript/node_modules/@serialport/bindings/build'
  CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t* ’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:13,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object> ’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:179:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:179:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:89:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:89:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

und npm list serialport

pi@iobroker-pi:/opt/iobroker $ npm list serialport
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.discovery@2.7.0
│ └── UNMET DEPENDENCY serialport@9.2.1
├─┬ iobroker.javascript@5.2.13
│ └── UNMET DEPENDENCY serialport@^9.2.8
├─┬ iobroker.modbus@3.4.14
│ └── UNMET DEPENDENCY serialport@9.2.1
└─┬ iobroker.smartmeter@3.2.1
  ├── UNMET DEPENDENCY serialport@9.2.1
  └─┬ smartmeter-obis@2.3.0
    └── UNMET DEPENDENCY serialport@9.2.1

npm ERR! missing: serialport@9.2.1, required by iobroker.discovery@2.7.0
npm ERR! missing: serialport@^9.2.8, required by iobroker.javascript@5.2.13
npm ERR! missing: serialport@9.2.1, required by iobroker.modbus@3.4.14
npm ERR! missing: serialport@9.2.1, required by iobroker.smartmeter@3.2.1
npm ERR! missing: serialport@9.2.1, required by smartmeter-obis@2.3.0

mach das ganze "npm rebuild" noch mal im iobroker verzeichnis

ostseeskipper

Sieht genau so bunt aus und auch npm list serialport hat sich nichts geändert

wendy2702

Das bunte ist ok.

Starte mal einen von den unten aufgeführten Adaptern neu und schaue dabei ins log.

ostseeskipper

@wendy2702
Die Adapter waren gerade alle rot und Protokolle gibts auch nicht mehr, und der iobroker slave hat sich verabschiedet.
Mach da mal ein reboot und hoffe mit putty rauf zu kommen.

ostseeskipper

@wendy2702
das sieht jetzt so aus

login as: pi
pi@192.168.0.243's password:
Linux iobroker-pi 5.10.63-v7+ #1496 SMP Wed Dec 1 15:58:11 GMT 2021 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Feb  7 17:42:26 2022 from 192.168.0.230
pi@iobroker-pi:~ $ npm list serialport
/home/pi
└── (empty)

ostseeskipper

nach npm rebuild wieder so


pi@iobroker-pi:/opt/iobroker $ npm list serialport
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.discovery@2.7.0
│ └── UNMET DEPENDENCY serialport@9.2.1
├─┬ iobroker.javascript@5.2.13
│ └── UNMET DEPENDENCY serialport@^9.2.8
├─┬ iobroker.modbus@3.4.14
│ └── UNMET DEPENDENCY serialport@9.2.1
└─┬ iobroker.smartmeter@3.2.1
  ├── UNMET DEPENDENCY serialport@9.2.1
  └─┬ smartmeter-obis@2.3.0
    └── UNMET DEPENDENCY serialport@9.2.1

npm ERR! missing: serialport@9.2.1, required by iobroker.discovery@2.7.0
npm ERR! missing: serialport@^9.2.8, required by iobroker.javascript@5.2.13
npm ERR! missing: serialport@9.2.1, required by iobroker.modbus@3.4.14
npm ERR! missing: serialport@9.2.1, required by iobroker.smartmeter@3.2.1
npm ERR! missing: serialport@9.2.1, required by smartmeter-obis@2.3.0
pi@iobroker-pi:/opt/iobroker $

ostseeskipper

Im ioBroker Log zeigt sich

host.iobroker-pi
	2022-02-07 21:43:49.536	info	Do not restart adapter system.adapter.smartmeter.0 because disabled or deleted
host.iobroker-pi
	2022-02-07 21:43:49.535	error	instance system.adapter.smartmeter.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.iobroker-pi
	2022-02-07 21:43:49.534	error	Caught by controller[0]: }
host.iobroker-pi
	2022-02-07 21:43:49.534	error	Caught by controller[0]: ]
host.iobroker-pi
	2022-02-07 21:43:49.533	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.smartmeter/smartmeter.js'
host.iobroker-pi
	2022-02-07 21:43:49.532	error	Caught by controller[0]: '/opt/iobroker/node_modules/smartmeter-obis/index.js',
host.iobroker-pi
	2022-02-07 21:43:49.532	error	Caught by controller[0]: '/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialRequestResponseTransport.js',
host.iobroker-pi
	2022-02-07 21:43:49.531	error	Caught by controller[0]: requireStack: [
host.iobroker-pi
	2022-02-07 21:43:49.531	error	Caught by controller[0]: code: 'MODULE_NOT_FOUND',
host.iobroker-pi
	2022-02-07 21:43:49.530	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:974:19) {
host.iobroker-pi
	2022-02-07 21:43:49.530	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:790:12)
host.iobroker-pi
	2022-02-07 21:43:49.529	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:950:32)
host.iobroker-pi
	2022-02-07 21:43:49.528	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)
host.iobroker-pi
	2022-02-07 21:43:49.528	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1085:14)
host.iobroker-pi
	2022-02-07 21:43:49.527	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialRequestResponseTransport.js:7:18)
host.iobroker-pi
	2022-02-07 21:43:49.527	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:101:18)
host.iobroker-pi
	2022-02-07 21:43:49.526	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:974:19)
host.iobroker-pi
	2022-02-07 21:43:49.526	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:746:27)
host.iobroker-pi
	2022-02-07 21:43:49.525	error	Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15)
host.iobroker-pi
	2022-02-07 21:43:49.524	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.smartmeter/smartmeter.js
host.iobroker-pi
	2022-02-07 21:43:49.524	error	Caught by controller[0]: - /opt/iobroker/node_modules/smartmeter-obis/index.js
host.iobroker-pi
	2022-02-07 21:43:49.518	error	Caught by controller[0]: - /opt/iobroker/node_modules/smartmeter-obis/lib/transports/SerialRequestResponseTransport.js
host.iobroker-pi
	2022-02-07 21:43:49.517	error	Caught by controller[0]: Require stack:
host.iobroker-pi
	2022-02-07 21:43:49.517	error	Caught by controller[0]: Error: Cannot find module 'serialport'
host.iobroker-pi
	2022-02-07 21:43:49.516	error	Caught by controller[0]: ^
host.iobroker-pi
	2022-02-07 21:43:49.515	error	Caught by controller[0]: throw err;
host.iobroker-pi
	2022-02-07 21:43:49.514	error	Caught by controller[0]: internal/modules/cjs/loader.js:905

ostseeskipper

Wie kann ich serialport und @serialport nachinstallieren scheinbar macht das rebuild das nicht

ostseeskipper

@ostseeskipper
mit

npm i serialport

und danach war zumindest der smartmeterzähler wieder aktiv und lief

edit: und auch der Modbus lief :blush: :+1:
@wendy2702 Danke fürs auf die Sprünge helfen:+1:

Community Forum

NEWS

Modbus über USB RS485

Support us

1.0k

32.4k

81.5k

1.3m