NEWS
Nach Absturz keine Verbindung mehr REDIS PROBLEM [gelöst]
ioBroker Allgemein
63
Beiträge
5
Kommentatoren
7.3k
Aufrufe
3
Watching
-
iobroker stop iobroker fix sudo apt dist-upgrade sudo reboot@thomas-braun
das hat keine Besserung gebracht:marc@ioBroker:~$ iobroker stop marc@ioBroker:~$ iobroker fix library: loaded Library version=2021-08-05 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2021-04-07 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://deb.debian.org/debian bullseye-backports InRelease OK:4 https://deb.nodesource.com/node_12.x bullseye InRelease OK:5 https://www.pivccu.de/piVCCU stable InRelease OK:6 http://mirror.armbian.de/apt bullseye InRelease Paketlisten werden gelesen… Fertig Installed gcc-c++ Installed python-dev ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== marc@ioBroker:~$ sudo apt dist-upgrade Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Die folgenden Pakete werden aktualisiert (Upgrade): armbian-bsp-cli-tinkerboard armbian-config armbian-firmware armbian-zsh linux-libc-dev pivccu-modules-dkms pivccu3 7 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 132 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 1.024 B Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] J Holen:2 https://www.pivccu.de/piVCCU stable/main armhf pivccu-modules-dkms all 1.0.68 [41,1 kB] Holen:3 https://www.pivccu.de/piVCCU stable/main armhf pivccu3 armhf 3.61.6-62 [120 MB] Holen:1 http://armbian.hosthatch.com/apt bullseye/bullseye-utils armhf armbian-bsp-cli-tinkerboard armhf 21.08.6 [433 kB] Holen:4 http://mirror.armbian.de/apt bullseye/main armhf armbian-config all 21.08.6 [126 kB] Holen:5 http://armbian.12z.eu/apt bullseye/main armhf armbian-firmware all 21.08.6 [7.934 kB] Holen:7 http://armbian.systemonachip.net/apt bullseye/main armhf linux-libc-dev armhf 21.08.6 [1.167 kB] Holen:6 https://imola.armbian.com/apt bullseye/main armhf armbian-zsh all 21.08.6 [3.013 kB] Es wurden 132 MB in 13 s geholt (10,4 MB/s). Preconfiguring packages ... (Lese Datenbank ... 100042 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../pivccu-modules-dkms_1.0.68_all.deb ... Removed /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service. Removed /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service. Removed /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service. -------- Uninstall Beginning -------- Module: pivccu Version: 1.0.64 Kernel: 5.10.60-rockchip (armv7l) ------------------------------------- Status: Before uninstall, this module version was ACTIVE on this kernel. dummy_rx8130.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. dw_apb_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. eq3_char_loop.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. fake_hmrf.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. generic_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_eth.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_usb-2.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_usb.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. led_trigger_timer.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. meson_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. pl011_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. plat_eq3ccu2.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. rpi_rf_mod_led.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. rtc-rx8130.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. depmod..... DKMS: uninstall completed. ------------------------------ Deleting module version: 1.0.64 completely from the DKMS tree. ------------------------------ Done. Entpacken von pivccu-modules-dkms (1.0.68) über (1.0.64) ... pivccu-modules-dkms (1.0.68) wird eingerichtet ... Error! The module/version combo: pivccu-1.0.68 is not located in the DKMS tree. Creating symlink /var/lib/dkms/pivccu/1.0.68/source -> /usr/src/pivccu-1.0.68 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j4 KERNELRELEASE=5.10.60-rockchip ARCH=arm all...... cleaning build area... DKMS: build completed. dummy_rx8130.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ dw_apb_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ eq3_char_loop.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ fake_hmrf.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ generic_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_eth.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_usb-2.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_usb.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ led_trigger_timer.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ meson_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ pl011_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ plat_eq3ccu2.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ rpi_rf_mod_led.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ rtc-rx8130.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ depmod..... DKMS: install completed. Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. Created symlink /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. Created symlink /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. (Lese Datenbank ... 100043 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-pivccu3_3.61.6-62_armhf.deb ... Removed /etc/systemd/system/pivccu.service.wants/monitor-hb-rf-eth.service. Removed /etc/systemd/system/multi-user.target.wants/pivccu.service. Entpacken von pivccu3 (3.61.6-62) über (3.59.6-59) ... Vorbereitung zum Entpacken von .../1-armbian-bsp-cli-tinkerboard_21.08.6_armhf.deb ... Entpacken von armbian-bsp-cli-tinkerboard (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../2-armbian-config_21.08.6_all.deb ... Entpacken von armbian-config (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../3-armbian-firmware_21.08.6_all.deb ... Entpacken von armbian-firmware (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../4-armbian-zsh_21.08.6_all.deb ... Entpacken von armbian-zsh (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../5-linux-libc-dev_21.08.6_armhf.deb ... Entpacken von linux-libc-dev:armhf (21.08.6) über (21.08.5) ... pivccu3 (3.61.6-62) wird eingerichtet ... Created symlink /etc/systemd/system/multi-user.target.wants/pivccu.service → /lib/systemd/system/pivccu.service. Created symlink /etc/systemd/system/pivccu.service.wants/monitor-hb-rf-eth.service → /lib/systemd/system/monitor-hb-rf-eth.service. linux-libc-dev:armhf (21.08.6) wird eingerichtet ... armbian-zsh (21.08.6) wird eingerichtet ... armbian-config (21.08.6) wird eingerichtet ... armbian-firmware (21.08.6) wird eingerichtet ... armbian-bsp-cli-tinkerboard (21.08.6) wird eingerichtet ... Trigger für initramfs-tools (0.140) werden verarbeitet ... update-initramfs: Generating /boot/initrd.img-5.10.60-rockchip W: Possible missing firmware /lib/firmware/mrvl/sdsd8997_combo_v4.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8987_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sdsd8977_combo_v2.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8887_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8897_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8797_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8787_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8786_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/rt73.bin for built-in driver rt73usb W: Possible missing firmware /lib/firmware/rtlwifi/rtl8723bu_bt.bin for built-in driver rtl8xxxu W: Possible missing firmware /lib/firmware/xc3028L-v36.fw for built-in driver tuner_xc2028 W: Possible missing firmware /lib/firmware/xc3028-v27.fw for built-in driver tuner_xc2028 W: Possible missing firmware /lib/firmware/dvb-fe-xc5000c-4.1.30.7.fw for built-in driver xc5000 W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.fw for built-in driver xc4000 W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.1.fw for built-in driver xc4000 W: Possible missing firmware /lib/firmware/bfubase.frm for built-in driver bfusb W: Possible missing firmware /lib/firmware/mediatek/mt7668pr2h.bin for built-in driver btusb W: Possible missing firmware /lib/firmware/mediatek/mt7663pr2h.bin for built-in driver btusb W: Possible missing firmware /lib/firmware/intel/ibt-12-16.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-12-16.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/mrvl/sdsd8997_combo_v4.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8987_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sdsd8977_combo_v2.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8897_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8887_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8797_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8787_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688_helper.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723bs_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723bs_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723a_fw.bin for built-in driver btrtl update-initramfs: Converting to u-boot format piVCCU: DTB rk3288-tinker.dtb was already patched piVCCU: DTB rk3288-tinker-s.dtb was already patched marc@ioBroker:~$ sudo reboot Connection to 192.168.1.31 closed by remote host. Connection to 192.168.1.31 closed. marc@iMac-Marc ~ % ssh marc@192.168.1.31 ssh: connect to host 192.168.1.31 port 22: Operation timed out marc@iMac-Marc ~ % ssh marc@192.168.1.31 ssh: connect to host 192.168.1.31 port 22: Operation timed out marc@iMac-Marc ~ % ssh marc@192.168.1.31 marc@192.168.1.31's password: _____ _ _ _ _ |_ _(_)_ __ | | _____ _ __| |__ ___ __ _ _ __ __| | | | | | '_ \| |/ / _ \ '__| '_ \ / _ \ / _` | '__/ _` | | | | | | | | < __/ | | |_) | (_) | (_| | | | (_| | |_| |_|_| |_|_|\_\___|_| |_.__/ \___/ \__,_|_| \__,_| Welcome to Armbian 21.08.6 Bullseye with Linux 5.10.60-rockchip System load: 30% Up time: 1 min Memory usage: 10% of 1.95G IP: 192.168.1.31 10.0.3.1 CPU temp: 62°C Usage of /: 32% of 15G Last login: Sat Dec 4 14:39:37 2021 from 192.168.1.150 marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis] marc@ioBroker:~$ -
@thomas-braun
das hat keine Besserung gebracht:marc@ioBroker:~$ iobroker stop marc@ioBroker:~$ iobroker fix library: loaded Library version=2021-08-05 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2021-04-07 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://deb.debian.org/debian bullseye-backports InRelease OK:4 https://deb.nodesource.com/node_12.x bullseye InRelease OK:5 https://www.pivccu.de/piVCCU stable InRelease OK:6 http://mirror.armbian.de/apt bullseye InRelease Paketlisten werden gelesen… Fertig Installed gcc-c++ Installed python-dev ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== marc@ioBroker:~$ sudo apt dist-upgrade Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Die folgenden Pakete werden aktualisiert (Upgrade): armbian-bsp-cli-tinkerboard armbian-config armbian-firmware armbian-zsh linux-libc-dev pivccu-modules-dkms pivccu3 7 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 132 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 1.024 B Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] J Holen:2 https://www.pivccu.de/piVCCU stable/main armhf pivccu-modules-dkms all 1.0.68 [41,1 kB] Holen:3 https://www.pivccu.de/piVCCU stable/main armhf pivccu3 armhf 3.61.6-62 [120 MB] Holen:1 http://armbian.hosthatch.com/apt bullseye/bullseye-utils armhf armbian-bsp-cli-tinkerboard armhf 21.08.6 [433 kB] Holen:4 http://mirror.armbian.de/apt bullseye/main armhf armbian-config all 21.08.6 [126 kB] Holen:5 http://armbian.12z.eu/apt bullseye/main armhf armbian-firmware all 21.08.6 [7.934 kB] Holen:7 http://armbian.systemonachip.net/apt bullseye/main armhf linux-libc-dev armhf 21.08.6 [1.167 kB] Holen:6 https://imola.armbian.com/apt bullseye/main armhf armbian-zsh all 21.08.6 [3.013 kB] Es wurden 132 MB in 13 s geholt (10,4 MB/s). Preconfiguring packages ... (Lese Datenbank ... 100042 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../pivccu-modules-dkms_1.0.68_all.deb ... Removed /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service. Removed /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service. Removed /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service. -------- Uninstall Beginning -------- Module: pivccu Version: 1.0.64 Kernel: 5.10.60-rockchip (armv7l) ------------------------------------- Status: Before uninstall, this module version was ACTIVE on this kernel. dummy_rx8130.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. dw_apb_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. eq3_char_loop.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. fake_hmrf.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. generic_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_eth.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_usb-2.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. hb_rf_usb.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. led_trigger_timer.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. meson_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. pl011_raw_uart.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. plat_eq3ccu2.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. rpi_rf_mod_led.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. rtc-rx8130.ko: - Uninstallation - Deleting from: /lib/modules/5.10.60-rockchip/updates/dkms/ - Original module - No original module was found for this module on this kernel. - Use the dkms install command to reinstall any previous module version. depmod..... DKMS: uninstall completed. ------------------------------ Deleting module version: 1.0.64 completely from the DKMS tree. ------------------------------ Done. Entpacken von pivccu-modules-dkms (1.0.68) über (1.0.64) ... pivccu-modules-dkms (1.0.68) wird eingerichtet ... Error! The module/version combo: pivccu-1.0.68 is not located in the DKMS tree. Creating symlink /var/lib/dkms/pivccu/1.0.68/source -> /usr/src/pivccu-1.0.68 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area... make -j4 KERNELRELEASE=5.10.60-rockchip ARCH=arm all...... cleaning build area... DKMS: build completed. dummy_rx8130.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ dw_apb_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ eq3_char_loop.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ fake_hmrf.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ generic_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_eth.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_usb-2.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ hb_rf_usb.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ led_trigger_timer.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ meson_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ pl011_raw_uart.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ plat_eq3ccu2.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ rpi_rf_mod_led.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ rtc-rx8130.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/5.10.60-rockchip/updates/dkms/ depmod..... DKMS: install completed. Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. Created symlink /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. Created symlink /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service. (Lese Datenbank ... 100043 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-pivccu3_3.61.6-62_armhf.deb ... Removed /etc/systemd/system/pivccu.service.wants/monitor-hb-rf-eth.service. Removed /etc/systemd/system/multi-user.target.wants/pivccu.service. Entpacken von pivccu3 (3.61.6-62) über (3.59.6-59) ... Vorbereitung zum Entpacken von .../1-armbian-bsp-cli-tinkerboard_21.08.6_armhf.deb ... Entpacken von armbian-bsp-cli-tinkerboard (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../2-armbian-config_21.08.6_all.deb ... Entpacken von armbian-config (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../3-armbian-firmware_21.08.6_all.deb ... Entpacken von armbian-firmware (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../4-armbian-zsh_21.08.6_all.deb ... Entpacken von armbian-zsh (21.08.6) über (21.08.5) ... Vorbereitung zum Entpacken von .../5-linux-libc-dev_21.08.6_armhf.deb ... Entpacken von linux-libc-dev:armhf (21.08.6) über (21.08.5) ... pivccu3 (3.61.6-62) wird eingerichtet ... Created symlink /etc/systemd/system/multi-user.target.wants/pivccu.service → /lib/systemd/system/pivccu.service. Created symlink /etc/systemd/system/pivccu.service.wants/monitor-hb-rf-eth.service → /lib/systemd/system/monitor-hb-rf-eth.service. linux-libc-dev:armhf (21.08.6) wird eingerichtet ... armbian-zsh (21.08.6) wird eingerichtet ... armbian-config (21.08.6) wird eingerichtet ... armbian-firmware (21.08.6) wird eingerichtet ... armbian-bsp-cli-tinkerboard (21.08.6) wird eingerichtet ... Trigger für initramfs-tools (0.140) werden verarbeitet ... update-initramfs: Generating /boot/initrd.img-5.10.60-rockchip W: Possible missing firmware /lib/firmware/mrvl/sdsd8997_combo_v4.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8987_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sdsd8977_combo_v2.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8887_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8897_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8797_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8787_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8786_uapsta.bin for built-in driver mwifiex_sdio W: Possible missing firmware /lib/firmware/rt73.bin for built-in driver rt73usb W: Possible missing firmware /lib/firmware/rtlwifi/rtl8723bu_bt.bin for built-in driver rtl8xxxu W: Possible missing firmware /lib/firmware/xc3028L-v36.fw for built-in driver tuner_xc2028 W: Possible missing firmware /lib/firmware/xc3028-v27.fw for built-in driver tuner_xc2028 W: Possible missing firmware /lib/firmware/dvb-fe-xc5000c-4.1.30.7.fw for built-in driver xc5000 W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.fw for built-in driver xc4000 W: Possible missing firmware /lib/firmware/dvb-fe-xc4000-1.4.1.fw for built-in driver xc4000 W: Possible missing firmware /lib/firmware/bfubase.frm for built-in driver bfusb W: Possible missing firmware /lib/firmware/mediatek/mt7668pr2h.bin for built-in driver btusb W: Possible missing firmware /lib/firmware/mediatek/mt7663pr2h.bin for built-in driver btusb W: Possible missing firmware /lib/firmware/intel/ibt-12-16.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-12-16.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.ddc for built-in driver btintel W: Possible missing firmware /lib/firmware/intel/ibt-11-5.sfi for built-in driver btintel W: Possible missing firmware /lib/firmware/mrvl/sdsd8997_combo_v4.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8987_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sdsd8977_combo_v2.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8897_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8887_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8797_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8787_uapsta.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/mrvl/sd8688_helper.bin for built-in driver btmrvl_sdio W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8821a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8761a_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723bs_config.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723bs_fw.bin for built-in driver btrtl W: Possible missing firmware /lib/firmware/rtl_bt/rtl8723a_fw.bin for built-in driver btrtl update-initramfs: Converting to u-boot format piVCCU: DTB rk3288-tinker.dtb was already patched piVCCU: DTB rk3288-tinker-s.dtb was already patched marc@ioBroker:~$ sudo reboot Connection to 192.168.1.31 closed by remote host. Connection to 192.168.1.31 closed. marc@iMac-Marc ~ % ssh marc@192.168.1.31 ssh: connect to host 192.168.1.31 port 22: Operation timed out marc@iMac-Marc ~ % ssh marc@192.168.1.31 ssh: connect to host 192.168.1.31 port 22: Operation timed out marc@iMac-Marc ~ % ssh marc@192.168.1.31 marc@192.168.1.31's password: _____ _ _ _ _ |_ _(_)_ __ | | _____ _ __| |__ ___ __ _ _ __ __| | | | | | '_ \| |/ / _ \ '__| '_ \ / _ \ / _` | '__/ _` | | | | | | | | < __/ | | |_) | (_) | (_| | | | (_| | |_| |_|_| |_|_|\_\___|_| |_.__/ \___/ \__,_|_| \__,_| Welcome to Armbian 21.08.6 Bullseye with Linux 5.10.60-rockchip System load: 30% Up time: 1 min Memory usage: 10% of 1.95G IP: 192.168.1.31 10.0.3.1 CPU temp: 62°C Usage of /: 32% of 15G Last login: Sat Dec 4 14:39:37 2021 from 192.168.1.150 marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis] marc@ioBroker:~$sudo -u iobroker groups -
@meicker sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
diese Nacht ist mein TinkerBoard abgestürzt. Es tat sich nichts mehr. Ich habe es dann neu gestartet und es schien auch zunächst alles wieder OK zu sein.
Also nach einem Absturz ... diese Nacht .
Ist dort ein Zusammenhang vom 21.November , da du den gleichen Fehler bzw. dort nach einem Backup hast ??
Ich habe nun mein iobroker neu installiert
https://forum.iobroker.net/topic/8823/restore-iobroker-auf-tinkerboard/5
@glasfaser
ich kann keinen direkten Zusammenhang sehen. Nur ist es mit dem Board schon der zweite Absurz. Beim ersten war der emmc kaputt und konnte nicht mehr booten. Jeztt bootet die SD aber noch und startet pivccu aber keinen iobroker mehr bzw. jetzt habe ich das redis zugriffsproblem ...Ich muss leider mal weg, m,elde mich später wieder. Vielleicht hat ja noch jemand eine Idee, ansonsten neu aufsetzen :-) Hab ich ja jetzt Übung drin ...
-
sudo -u iobroker groupsiobroker tty dialout audio video i2c bluetooth redis marc@ioBroker:~$ -
sudo -u iobroker groups@thomas-braun
ich muss mal kurz weg. Ich mache später weiter wenn Du noch einen Hinweis hast :-) ! Danke schonmal vorab ! -
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
> sudo systemctl enable redis-server marc@ioBroker:~$ sudo systemctl status redis-server ● redis-server.service - Advanced key-value store Loaded: loaded (/lib/systemd/system/redis-server.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2021-12-04 14:59:47 CET; 15s ago Docs: http://redis.io/documentation, man:redis-server(1) Process: 4541 ExecStart=/usr/bin/redis-server /etc/redis/redis.conf --supervised systemd --daemonize no (code=exited, status=1/FAILURE) Main PID: 4541 (code=exited, status=1/FAILURE) Status: "Redis is loading..." CPU: 109ms Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Scheduled restart job, restart counter is at 5. Dez 04 14:59:47 ioBroker systemd[1]: Stopped Advanced key-value store. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Start request repeated too quickly. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Failed with result 'exit-code'. Dez 04 14:59:47 ioBroker systemd[1]: Failed to start Advanced key-value store. -
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
> sudo systemctl enable redis-server marc@ioBroker:~$ sudo systemctl status redis-server ● redis-server.service - Advanced key-value store Loaded: loaded (/lib/systemd/system/redis-server.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2021-12-04 14:59:47 CET; 15s ago Docs: http://redis.io/documentation, man:redis-server(1) Process: 4541 ExecStart=/usr/bin/redis-server /etc/redis/redis.conf --supervised systemd --daemonize no (code=exited, status=1/FAILURE) Main PID: 4541 (code=exited, status=1/FAILURE) Status: "Redis is loading..." CPU: 109ms Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Scheduled restart job, restart counter is at 5. Dez 04 14:59:47 ioBroker systemd[1]: Stopped Advanced key-value store. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Start request repeated too quickly. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Failed with result 'exit-code'. Dez 04 14:59:47 ioBroker systemd[1]: Failed to start Advanced key-value store. -
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
iobroker status
marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis] -
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
iobroker status
marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis]hast du
sudo systemctl enable redis-servergemacht , sehe ich nicht
EDIT :
war abgeschnitten .
Dann
iobroker stop iobroker host this iobroker startSynology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
hast du
sudo systemctl enable redis-servergemacht , sehe ich nicht
EDIT :
war abgeschnitten .
Dann
iobroker stop iobroker host this iobroker start@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
gemacht , sehe ich nicht
zeile 1 - sieht aber komisch aus
-
hast du
sudo systemctl enable redis-servergemacht , sehe ich nicht
EDIT :
war abgeschnitten .
Dann
iobroker stop iobroker host this iobroker start@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
sudo systemctl enable redis-server
in Zeile 1 wqeiter oben im code
-
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
sudo systemctl enable redis-server
in Zeile 1 wqeiter oben im code
-
hast du
sudo systemctl enable redis-servergemacht , sehe ich nicht
EDIT :
war abgeschnitten .
Dann
iobroker stop iobroker host this iobroker start@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
sudo systemctl enable redis-server
marc@ioBroker:~$ sudo systemctl enable redis-server [sudo] Passwort für marc: Synchronizing state of redis-server.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable redis-server marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis] -
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
> sudo systemctl enable redis-server marc@ioBroker:~$ sudo systemctl status redis-server ● redis-server.service - Advanced key-value store Loaded: loaded (/lib/systemd/system/redis-server.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2021-12-04 14:59:47 CET; 15s ago Docs: http://redis.io/documentation, man:redis-server(1) Process: 4541 ExecStart=/usr/bin/redis-server /etc/redis/redis.conf --supervised systemd --daemonize no (code=exited, status=1/FAILURE) Main PID: 4541 (code=exited, status=1/FAILURE) Status: "Redis is loading..." CPU: 109ms Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Scheduled restart job, restart counter is at 5. Dez 04 14:59:47 ioBroker systemd[1]: Stopped Advanced key-value store. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Start request repeated too quickly. Dez 04 14:59:47 ioBroker systemd[1]: redis-server.service: Failed with result 'exit-code'. Dez 04 14:59:47 ioBroker systemd[1]: Failed to start Advanced key-value store.@meicker sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
Dez 04 14:59:47 ioBroker systemd[1]: Failed to start Advanced key-value store.
Ist ioBroker in einer VM installiert !?
https://forum.iobroker.net/topic/18835/auf-redis-umstellen/82?_=1638625607365
-
hast du
sudo systemctl enable redis-servergemacht , sehe ich nicht
EDIT :
war abgeschnitten .
Dann
iobroker stop iobroker host this iobroker startmarc@ioBroker:~$ iobroker stop marc@ioBroker:~$ iobroker host this No connection to states 127.0.0.1:6379[redis] marc@ioBroker:~$ iobroker start marc@ioBroker:~$ iobroker status No connection to states 127.0.0.1:6379[redis] marc@ioBroker:~$ -
@meicker sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
Dez 04 14:59:47 ioBroker systemd[1]: Failed to start Advanced key-value store.
Ist ioBroker in einer VM installiert !?
https://forum.iobroker.net/topic/18835/auf-redis-umstellen/82?_=1638625607365
@glasfaser sagte in Nach Absturz keine Verbindung mehr zum Admin REDIS PROBLEM:
Ist ioBroker in einer VM installiert !?
nein
-
@meicker
Hast Du schon mal in den redis-server logfiles gesucht? Die liegen vermutlich in
/var/log/redis -
@meicker
Hast Du schon mal in den redis-server logfiles gesucht? Die liegen vermutlich in
/var/log/redis@meister-mopper
da darf ich als 'user' nicht rein. Aber mit root ...4666:C 04 Dec 2021 15:00:18.887 # WARNING supervised by systemd - you MUST set appropriate values for TimeoutStartSec and TimeoutStopSec in your service unit. 4666:C 04 Dec 2021 15:00:18.888 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo 4666:C 04 Dec 2021 15:00:18.888 # Redis version=6.0.15, bits=32, commit=00000000, modified=0, pid=4666, just started 4666:C 04 Dec 2021 15:00:18.888 # Configuration loaded 4666:M 04 Dec 2021 15:00:18.890 # Warning: 32 bit instance detected but no memory limit set. Setting 3 GB maxmemory limit with 'noeviction' policy now. _._ _.-``__ ''-._ _.-`` `. `_. ''-._ Redis 6.0.15 (00000000/0) 32 bit .-`` .-```. ```\/ _.,_ ''-._ ( ' , .-` | `, ) Running in standalone mode |`-._`-...-` __...-.``-._|'` _.-'| Port: 6379 | `-._ `._ / _.-' | PID: 4666 `-._ `-._ `-./ _.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | http://redis.io `-._ `-._`-.__.-'_.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | `-._ `-._`-.__.-'_.-' _.-' `-._ `-.__.-' _.-' `-._ _.-' `-.__.-' 4666:M 04 Dec 2021 15:00:18.892 # Server initialized 4666:M 04 Dec 2021 15:00:18.892 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect. 4666:M 04 Dec 2021 15:00:18.892 # Wrong signature trying to load DB from file 4666:M 04 Dec 2021 15:00:18.892 # Fatal error loading the DB: Invalid argument. Exiting. 4681:C 04 Dec 2021 15:00:19.278 # WARNING supervised by systemd - you MUST set appropriate values for TimeoutStartSec and TimeoutStopSec in your service unit. 4681:C 04 Dec 2021 15:00:19.278 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo 4681:C 04 Dec 2021 15:00:19.278 # Redis version=6.0.15, bits=32, commit=00000000, modified=0, pid=4681, just started 4681:C 04 Dec 2021 15:00:19.278 # Configuration loaded 4681:M 04 Dec 2021 15:00:19.281 # Warning: 32 bit instance detected but no memory limit set. Setting 3 GB maxmemory limit with 'noeviction' policy now.im zweiten Block Zeiole 2 und 3 kommt was ...
803
Online32.6k
Benutzer82.2k
Themen1.3m
Beiträge