Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...

AlCalzone

@esmax666 sagte in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

jetzt habe ich ein bisschen mehr

Hast du in diesem Ausschnitt versucht, das Gerät zu steuern? Ich seh es zumindest nicht. Das Log muss offen sein, während du das tusts - am besten in neuem Fenster öffnen.

Esmax666

@alcalzone said in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

Das Log muss offen sein, während du das tusts

ok wuste ich nicht:
1000 mal danke für dein hilfe

also hier normal gemacht:

ich habe 2 mal über "object probiert" und kein reaktion und dannach direkt vor Ort (mit rollo schalter) die rollo ein bisschen zu und wieder geöffnet

Subscribed to logs...
2021-10-16T07:32:45.355Z SERIAL » 0x010e001322076c018a0326013c25736e                                  (16 bytes)
2021-10-16T07:32:45.357Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      115
                                  └─[SupervisionCCGet]
                                    │ session id:      10
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 60
2021-10-16T07:32:45.360Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:32:45.366Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:32:45.367Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:45.367Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:32:45.383Z SERIAL « 0x01070013730000029a                                                 (9 bytes)
2021-10-16T07:32:45.383Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:45.384Z DRIVER « [REQ] [SendData]
                                    callback id:     115
                                    transmit status: OK
2021-10-16T07:32:45.398Z SERIAL « 0x010b00040022056c020a0000b3                                        (13 bytes)
2021-10-16T07:32:45.400Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:45.402Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          10
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s
2021-10-16T07:32:59.444Z SERIAL » 0x010e001322076c018b03260146257412                                  (16 bytes)
2021-10-16T07:32:59.445Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      116
                                  └─[SupervisionCCGet]
                                    │ session id:      11
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 70
2021-10-16T07:32:59.448Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:32:59.454Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:32:59.455Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:59.455Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:32:59.471Z SERIAL « 0x01070013740000029d                                                 (9 bytes)
2021-10-16T07:32:59.471Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:59.472Z DRIVER « [REQ] [SendData]
                                    callback id:     116
                                    transmit status: OK
2021-10-16T07:32:59.486Z SERIAL « 0x010b00040022056c020b0000b2                                        (13 bytes)
2021-10-16T07:32:59.487Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:32:59.488Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          11
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s
2021-10-16T07:33:44.455Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:33:44.458Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:44.460Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:33:44.471Z SERIAL » 0x01110013220a9880edbefa3f1e61dd6f0575e6                            (19 bytes)
2021-10-16T07:33:44.471Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      117
                                  └─[SecurityCCNonceReport]
                                      nonce: 0xedbefa3f1e61dd6f
2021-10-16T07:33:44.475Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:33:44.479Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:33:44.481Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:44.482Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:33:44.496Z SERIAL « 0x01070013750000029c                                                 (9 bytes)
2021-10-16T07:33:44.497Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:44.497Z DRIVER « [REQ] [SendData]
                                    callback id:     117
                                    transmit status: OK
2021-10-16T07:33:44.521Z SERIAL « 0x011f000400221998812a4a28233e10ef60b8b20f6b32efed5944e510f956035b4 (33 bytes)
                                  d
2021-10-16T07:33:44.522Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:44.524Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 99 => 90         [Endpoint 0]
2021-10-16T07:33:44.526Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 90
2021-10-16T07:33:45.153Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:33:45.156Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:45.157Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:33:45.167Z SERIAL » 0x01110013220a9880ff37beadad3155600576cc                            (19 bytes)
2021-10-16T07:33:45.167Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      118
                                  └─[SecurityCCNonceReport]
                                      nonce: 0xff37beadad315560
2021-10-16T07:33:45.170Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:33:45.176Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:33:45.179Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:45.180Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:33:45.192Z SERIAL « 0x01070013760000029f                                                 (9 bytes)
2021-10-16T07:33:45.192Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:45.193Z DRIVER « [REQ] [SendData]
                                    callback id:     118
                                    transmit status: OK
2021-10-16T07:33:45.215Z SERIAL « 0x011f00040022199881105b19cb40b2dc5f3dc6402af20cffcd49fafb27d515a27 (33 bytes)
                                  e
2021-10-16T07:33:45.217Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:45.219Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 90 => 82         [Endpoint 0]
2021-10-16T07:33:45.221Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 82
2021-10-16T07:33:47.473Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:33:47.476Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:47.478Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:33:47.487Z SERIAL » 0x01110013220a98805aeca0387e687bb305774f                            (19 bytes)
2021-10-16T07:33:47.488Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      119
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x5aeca0387e687bb3
2021-10-16T07:33:47.492Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:33:47.496Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:33:47.497Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:47.498Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:33:47.514Z SERIAL « 0x01070013770000029e                                                 (9 bytes)
2021-10-16T07:33:47.515Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:47.515Z DRIVER « [REQ] [SendData]
                                    callback id:     119
                                    transmit status: OK
2021-10-16T07:33:47.538Z SERIAL « 0x011f00040022199881a2a4364a6c34c72de72602f405df5a807a242f1a7c8c1cb (33 bytes)
                                  e
2021-10-16T07:33:47.539Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:47.541Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 82 => 90         [Endpoint 0]
2021-10-16T07:33:47.543Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 90
2021-10-16T07:33:48.390Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:33:48.393Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:48.395Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:33:48.409Z SERIAL » 0x01110013220a988070ecfb85043fe04a0578c3                            (19 bytes)
2021-10-16T07:33:48.410Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      120
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x70ecfb85043fe04a
2021-10-16T07:33:48.413Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:33:48.419Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:33:48.420Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:48.421Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:33:48.435Z SERIAL « 0x010700137800000291                                                 (9 bytes)
2021-10-16T07:33:48.436Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:48.436Z DRIVER « [REQ] [SendData]
                                    callback id:     120
                                    transmit status: OK
2021-10-16T07:33:48.460Z SERIAL « 0x011f00040022199881903288c0101927ad382fb63cf3e57089f6c8aeff6b96a4e (33 bytes)
                                  b
2021-10-16T07:33:48.461Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:33:48.463Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 90 => 99         [Endpoint 0]
2021-10-16T07:33:48.465Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 99

und hier normal ein getrennt versuch über Iobrocker

Subscribed to logs...
2021-10-16T07:37:00.557Z SERIAL « 0x01080004002002984009                                              (10 bytes)
2021-10-16T07:37:00.567Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:00.569Z DRIVER « [Node 032] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:37:00.576Z SERIAL » 0x01110013200a9880b16a905cfa5c415805791b                            (19 bytes)
2021-10-16T07:37:00.576Z DRIVER » [Node 032] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      121
                                  └─[SecurityCCNonceReport]
                                      nonce: 0xb16a905cfa5c4158
2021-10-16T07:37:00.579Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:37:00.584Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:37:00.585Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:00.586Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:37:00.601Z SERIAL « 0x010700137900000290                                                 (9 bytes)
2021-10-16T07:37:00.601Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:00.602Z DRIVER « [REQ] [SendData]
                                    callback id:     121
                                    transmit status: OK
2021-10-16T07:37:00.627Z SERIAL « 0x012900040020239881d27b513994f033d3c17fb9f9758bd4dd5047a20b61cfc73 (43 bytes)
                                  0b1dddbf20acf953e6e26
2021-10-16T07:37:00.629Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:00.631Z CNTRLR   [Node 032] [~] [Meter] value[65537]: 0.19 => 0.19                 [Endpoint 0]
2021-10-16T07:37:00.634Z DRIVER « [Node 032] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MeterCCReport]
                                        type:       Electric
                                        scale:      kWh
                                        rate type:  Consumed
                                        value:      0.19
                                        time delta: 0 seconds
2021-10-16T07:37:51.697Z SERIAL » 0x010e001322076c018c03260133257a6e                                  (16 bytes)
2021-10-16T07:37:51.699Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      122
                                  └─[SupervisionCCGet]
                                    │ session id:      12
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 51
2021-10-16T07:37:51.701Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:37:51.708Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:37:51.708Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:51.709Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:37:51.724Z SERIAL « 0x010700137a00000293                                                 (9 bytes)
2021-10-16T07:37:51.725Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:51.726Z DRIVER « [REQ] [SendData]
                                    callback id:     122
                                    transmit status: OK
2021-10-16T07:37:51.740Z SERIAL « 0x010b00040022056c020c0000b5                                        (13 bytes)
2021-10-16T07:37:51.741Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:37:51.742Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          12
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s
2021-10-16T07:38:01.916Z SERIAL » 0x010e001322076c018d03260134257b69                                  (16 bytes)
2021-10-16T07:38:01.918Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      123
                                  └─[SupervisionCCGet]
                                    │ session id:      13
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 52
2021-10-16T07:38:01.920Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:38:01.927Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:38:01.927Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:38:01.928Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:38:01.943Z SERIAL « 0x010700137b00000292                                                 (9 bytes)
2021-10-16T07:38:01.944Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:38:01.945Z DRIVER « [REQ] [SendData]
                                    callback id:     123
                                    transmit status: OK
2021-10-16T07:38:01.958Z SERIAL « 0x010b00040022056c020d0000b4                                        (13 bytes)
2021-10-16T07:38:01.959Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:38:01.960Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          13
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s

Edit:

hier habe ich noch ein extra log erstellt wenn ich direkt vor Ort die rollo Öffnen und schlissen

Subscribed to logs...
2021-10-16T07:41:39.642Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:39.646Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:39.648Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:39.657Z SERIAL » 0x01110013220a98804241ef013040e956057c96                            (19 bytes)
2021-10-16T07:41:39.657Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      124
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x4241ef013040e956
2021-10-16T07:41:39.660Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:39.665Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:39.666Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:39.667Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:39.682Z SERIAL « 0x010700137c00000295                                                 (9 bytes)
2021-10-16T07:41:39.683Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:39.688Z DRIVER « [REQ] [SendData]
                                    callback id:     124
                                    transmit status: OK
2021-10-16T07:41:39.707Z SERIAL « 0x011f00040022199881a2735f88f099c0fef582cf90f30642ce3921650a6f61eb5 (33 bytes)
                                  4
2021-10-16T07:41:39.708Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:39.710Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 99 => 90         [Endpoint 0]
2021-10-16T07:41:39.711Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 90
2021-10-16T07:41:40.431Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:40.434Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:40.436Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:40.447Z SERIAL » 0x01110013220a98805133c0dc97932398057d74                            (19 bytes)
2021-10-16T07:41:40.447Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      125
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x5133c0dc97932398
2021-10-16T07:41:40.450Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:40.455Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:40.456Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:40.457Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:40.472Z SERIAL « 0x010700137d00000294                                                 (9 bytes)
2021-10-16T07:41:40.473Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:40.473Z DRIVER « [REQ] [SendData]
                                    callback id:     125
                                    transmit status: OK
2021-10-16T07:41:40.498Z SERIAL « 0x011f000400221998810d246856288fa71aaf265bb0516a51bfaf9d1cef5c5a4ff (33 bytes)
                                  4
2021-10-16T07:41:40.499Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:40.501Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 90 => 80         [Endpoint 0]
2021-10-16T07:41:40.503Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 80
2021-10-16T07:41:41.282Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:41.284Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.286Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:41.295Z SERIAL » 0x01110013220a9880df84c65bb49fcc8b057e1c                            (19 bytes)
2021-10-16T07:41:41.296Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      126
                                  └─[SecurityCCNonceReport]
                                      nonce: 0xdf84c65bb49fcc8b
2021-10-16T07:41:41.298Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:41.305Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:41.306Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.307Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:41.320Z SERIAL « 0x010700137e00000297                                                 (9 bytes)
2021-10-16T07:41:41.321Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.321Z DRIVER « [REQ] [SendData]
                                    callback id:     126
                                    transmit status: OK
2021-10-16T07:41:41.349Z SERIAL « 0x011f000400221998815c623635e32bd276b1e5e86c54e6df6fc863e33d4ddc2d8 (33 bytes)
                                  c
2021-10-16T07:41:41.350Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.352Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 80 => 70         [Endpoint 0]
2021-10-16T07:41:41.354Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 70
2021-10-16T07:41:41.543Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:41.545Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.547Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:41.555Z SERIAL » 0x01110013220a988079ac7f087347811e057fbe                            (19 bytes)
2021-10-16T07:41:41.556Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      127
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x79ac7f087347811e
2021-10-16T07:41:41.558Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:41.564Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:41.564Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.566Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:41.580Z SERIAL « 0x010700137f00000296                                                 (9 bytes)
2021-10-16T07:41:41.581Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.582Z DRIVER « [REQ] [SendData]
                                    callback id:     127
                                    transmit status: OK
2021-10-16T07:41:41.604Z SERIAL « 0x011f00040022199881563a2a925ee36c39c5c8bfaf594679b2840757ac83ad3f5 (33 bytes)
                                  a
2021-10-16T07:41:41.605Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:41.607Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 70 => 68         [Endpoint 0]
2021-10-16T07:41:41.609Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 68
2021-10-16T07:41:43.145Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:43.147Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:43.149Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:43.159Z SERIAL » 0x01110013220a9880066563607e0def30058084                            (19 bytes)
2021-10-16T07:41:43.160Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      128
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x066563607e0def30
2021-10-16T07:41:43.163Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:43.168Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:43.168Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:43.169Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:43.184Z SERIAL « 0x010700138000000269                                                 (9 bytes)
2021-10-16T07:41:43.185Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:43.185Z DRIVER « [REQ] [SendData]
                                    callback id:     128
                                    transmit status: OK
2021-10-16T07:41:43.209Z SERIAL « 0x011f00040022199881f3715a8f9b1db836ff794f94bc000655f54572b8bcd6013 (33 bytes)
                                  a
2021-10-16T07:41:43.211Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:43.213Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 68 => 70         [Endpoint 0]
2021-10-16T07:41:43.215Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 70
2021-10-16T07:41:44.031Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:44.033Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.035Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:44.045Z SERIAL » 0x01110013220a988098eba6e7b832c71905812f                            (19 bytes)
2021-10-16T07:41:44.045Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      129
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x98eba6e7b832c719
2021-10-16T07:41:44.048Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:44.053Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:44.054Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.055Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:44.070Z SERIAL « 0x010700138100000268                                                 (9 bytes)
2021-10-16T07:41:44.070Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.071Z DRIVER « [REQ] [SendData]
                                    callback id:     129
                                    transmit status: OK
2021-10-16T07:41:44.094Z SERIAL « 0x011f00040022199881629f814d2e9b446ffbc1c8bf6cba98c9314a8f419b97756 (33 bytes)
                                  f
2021-10-16T07:41:44.096Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.097Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 70 => 80         [Endpoint 0]
2021-10-16T07:41:44.099Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 80
2021-10-16T07:41:44.865Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:44.868Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.870Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:44.879Z SERIAL » 0x01110013220a988043d3ed0d49fd03360582bb                            (19 bytes)
2021-10-16T07:41:44.880Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      130
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x43d3ed0d49fd0336
2021-10-16T07:41:44.885Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:44.888Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:44.889Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.889Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:44.904Z SERIAL « 0x01070013820000026b                                                 (9 bytes)
2021-10-16T07:41:44.905Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.905Z DRIVER « [REQ] [SendData]
                                    callback id:     130
                                    transmit status: OK
2021-10-16T07:41:44.929Z SERIAL « 0x011f000400221998815b7f46e1548130cca77e35daeb77435c29350c3c8ac6ee5 (33 bytes)
                                  7
2021-10-16T07:41:44.931Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:44.932Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 80 => 90         [Endpoint 0]
2021-10-16T07:41:44.934Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 90
2021-10-16T07:41:45.779Z SERIAL « 0x0108000400220298400b                                              (10 bytes)
2021-10-16T07:41:45.781Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:45.783Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCNonceGet]
2021-10-16T07:41:45.796Z SERIAL » 0x01110013220a98808650417bd3bcfac90583fb                            (19 bytes)
2021-10-16T07:41:45.797Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x05
                                  │ callback id:      131
                                  └─[SecurityCCNonceReport]
                                      nonce: 0x8650417bd3bcfac9
2021-10-16T07:41:45.804Z SERIAL « [ACK]                                                                   (0x06)
2021-10-16T07:41:45.806Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-16T07:41:45.807Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:45.808Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-16T07:41:45.821Z SERIAL « 0x01070013830000026a                                                 (9 bytes)
2021-10-16T07:41:45.822Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:45.822Z DRIVER « [REQ] [SendData]
                                    callback id:     131
                                    transmit status: OK
2021-10-16T07:41:45.852Z SERIAL « 0x011f0004002219988124ea00187ed003250c90798e8be086f1c9244268f6822e7 (33 bytes)
                                  2
2021-10-16T07:41:45.853Z SERIAL » [ACK]                                                                   (0x06)
2021-10-16T07:41:45.855Z CNTRLR   [Node 034] [~] [Multilevel Switch] currentValue: 90 => 99         [Endpoint 0]
2021-10-16T07:41:45.857Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SecurityCCCommandEncapsulation]
                                    │ sequenced: false
                                    └─[MultilevelSwitchCCReport]
                                        current value: 99

ud hier noch iobroker.current.log

021-10-16 09:32:20.658 - debug: zwave2.0 (25293) sendTo "subscribeLogs" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:32:45.355 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:32:46.355 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:32:59.444 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:32:59.608 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:44.456 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:44.474 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:44.504 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:44.525 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 90
2021-10-16 09:33:44.549 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:45.153 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:45.173 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:45.213 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:45.220 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 82
2021-10-16 09:33:45.263 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:47.474 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:47.490 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:47.523 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:47.541 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 90
2021-10-16 09:33:47.568 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:48.390 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:48.414 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:48.453 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:33:48.464 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 99
2021-10-16 09:33:48.492 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:36:44.980 - debug: zwave2.0 (25293) sendTo "subscribeLogs" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:37:00.558 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:37:00.559 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:37:00.632 - debug: zwave2.0 (25293) Node 32: value updated: value_electric_kwh_consumed => 0.19
2021-10-16 09:37:01.580 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:37:51.698 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:37:52.695 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:38:01.916 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:38:02.924 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:40:26.327 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:40:26.330 - debug: zwave2.0 (25293) Node 4: metadata updated: airTemperature
2021-10-16 09:40:26.332 - debug: zwave2.0 (25293) Node 4: value updated: airTemperature => 15.06
2021-10-16 09:40:27.353 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:33.183 - debug: zwave2.0 (25293) sendTo "subscribeLogs" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.642 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.644 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.659 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.676 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.693 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:39.710 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 90
2021-10-16 09:41:39.715 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:40.432 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:40.449 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:40.464 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:40.495 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:40.502 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 80
2021-10-16 09:41:40.523 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.282 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.304 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.344 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.353 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 70
2021-10-16 09:41:41.392 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.544 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.562 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.597 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:41.608 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 68
2021-10-16 09:41:41.638 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:43.145 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:43.161 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:43.193 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:43.213 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 70
2021-10-16 09:41:43.237 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.031 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.047 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.082 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.098 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 80
2021-10-16 09:41:44.128 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.865 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.882 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:44.933 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 90
2021-10-16 09:41:44.939 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:45.779 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:45.798 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:45.829 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0
2021-10-16 09:41:45.856 - debug: zwave2.0 (25293) Node 34: value updated: currentValue => 99
2021-10-16 09:41:45.877 - debug: zwave2.0 (25293) sendTo "registerPushCallback" to system.adapter.admin.0 from system.adapter.zwave2.0

AlCalzone

@esmax666 sagte in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

NoSupport

Da liegt das Problem. Welches Gerät ist das genau? Bitte bei Node 34 auf den Bleistift zum Bearbeiten klicken und diese Infos kopieren:

Esmax666

@alcalzone said in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

Bleistift zum Bearbeiten klicken

"id": 34,
"manufacturerId": 665,
"productType": 5,
"productId": 6803,
"type": {
  "basic": "Routing Slave",
  "generic": "Multilevel Switch",
  "specific": "Motor Control Class B"
},

@alcalzone said in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

Welches Gerät ist das genau?
Technisat Roller-shutter
https://www.technisat.com/en_XX/Roller-shutter-flush-mount,-BJ/352-22704-22938/

Früher hat das schon funktionniert, aber angeblich habe ich ein update gemacht und dann geht es nicht mehr seltsam

AlCalzone

Danke, Issue ist erstellt: https://github.com/zwave-js/node-zwave-js/issues/3536
Sollte in den nächsten Tagen gelöst sein.

AlCalzone created this issue in zwave-js/node-zwave-js

closed TechniSat / Flush Roller Shutter Switch does not support Supervision #3536

Esmax666

Danke sehr cool

Hinweis: Die z wave version früher hat funktionniert mit Technisat ( Z wave module war circa 1 jahr nicht mehr geupdatet) vielleicht kannst du etwas dort etwas finden

AlCalzone

@esmax666 Ich weiß schon was es ist

Esmax666

@alcalzone said in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

@esmax666 Ich weiß schon was es ist

Can ich zurück auf ein alte version gehen ? Wie genau ? danke

AlCalzone

@esmax666 Wenn du dich noch bis morgen gedulden kannst, gibts einen Patch, der dein Problem lösen sollte.

AlCalzone

Version 2.2.4 ist auf dem Weg und sollte dein Problem beheben @Esmax666

Esmax666

@alcalzone said in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

Version 2.2.4 ist auf dem Weg und sollte dein Problem beheben @Esmax666

super danke Momentan sehe ich noch 2.2.2

AlCalzone

@esmax666 Dann installier mal manuell:

Esmax666

@alcalzone

Ok gemacht, leider geht es nicht

Subscribed to logs...
2021-10-22T11:50:49.553Z SERIAL « 0x01070013050000a54b                                                 (9 bytes)
2021-10-22T11:50:49.565Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:49.569Z DRIVER « [REQ] [SendData]
                                    callback id:     5
                                    transmit status: OK
2021-10-22T11:50:49.583Z SERIAL » 0x010800131a01002506dc                                              (10 bytes)
2021-10-22T11:50:49.584Z DRIVER » [Node 026] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      6
                                  └─[NoOperationCC]
2021-10-22T11:50:49.586Z CNTRLR   [Node 022] The node is alive.
2021-10-22T11:50:49.587Z CNTRLR   [Node 022] The node is ready to be used
2021-10-22T11:50:49.588Z CNTRLR « [Node 022] ping successful
2021-10-22T11:50:49.593Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:49.599Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:49.600Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:49.601Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:53.726Z SERIAL « 0x010700130601019e73                                                 (9 bytes)
2021-10-22T11:50:53.730Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.732Z DRIVER « [REQ] [SendData]
                                    callback id:     6
                                    transmit status: NoAck
2021-10-22T11:50:53.742Z CNTRLR   [Node 026] Node 26 did not respond after 1 attempts, it is presumed dead
2021-10-22T11:50:53.743Z CNTRLR   [Node 026] The node is dead.
2021-10-22T11:50:53.748Z SERIAL » 0x010800131d01002507da                                              (10 bytes)
2021-10-22T11:50:53.749Z DRIVER » [Node 029] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      7
                                  └─[NoOperationCC]
2021-10-22T11:50:53.750Z CNTRLR   [Node 026] ping failed: Failed to send the command after 1 attempts (Status No
                                  Ack) (ZW0020)
2021-10-22T11:50:53.751Z CNTRLR » [Node 026] querying node info...
2021-10-22T11:50:53.751Z CNTRLR » [Node 026] pinging the node...
2021-10-22T11:50:53.757Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:53.760Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:53.761Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.763Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:53.819Z SERIAL « 0x0107001307000006ea                                                 (9 bytes)
2021-10-22T11:50:53.821Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.822Z DRIVER « [REQ] [SendData]
                                    callback id:     7
                                    transmit status: OK
2021-10-22T11:50:53.834Z SERIAL » 0x010800131e01002508d6                                              (10 bytes)
2021-10-22T11:50:53.834Z DRIVER » [Node 030] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      8
                                  └─[NoOperationCC]
2021-10-22T11:50:53.837Z CNTRLR   [Node 029] The node is alive.
2021-10-22T11:50:53.838Z CNTRLR   [Node 029] The node is ready to be used
2021-10-22T11:50:53.839Z CNTRLR « [Node 029] ping successful
2021-10-22T11:50:53.845Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:53.848Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:53.849Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.850Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:53.909Z SERIAL « 0x0107001308000006e5                                                 (9 bytes)
2021-10-22T11:50:53.910Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.910Z DRIVER « [REQ] [SendData]
                                    callback id:     8
                                    transmit status: OK
2021-10-22T11:50:53.925Z SERIAL » 0x010800131f01002509d6                                              (10 bytes)
2021-10-22T11:50:53.926Z DRIVER » [Node 031] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      9
                                  └─[NoOperationCC]
2021-10-22T11:50:53.927Z CNTRLR   [Node 030] The node is alive.
2021-10-22T11:50:53.928Z CNTRLR   [Node 030] The node is ready to be used
2021-10-22T11:50:53.929Z CNTRLR « [Node 030] ping successful
2021-10-22T11:50:53.932Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:53.949Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:53.950Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.954Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:53.961Z SERIAL « 0x0107001309000002e0                                                 (9 bytes)
2021-10-22T11:50:53.963Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.964Z DRIVER « [REQ] [SendData]
                                    callback id:     9
                                    transmit status: OK
2021-10-22T11:50:53.972Z SERIAL » 0x01080013200100250aea                                              (10 bytes)
2021-10-22T11:50:53.972Z DRIVER » [Node 032] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      10
                                  └─[NoOperationCC]
2021-10-22T11:50:53.973Z CNTRLR   [Node 031] The node is alive.
2021-10-22T11:50:53.974Z CNTRLR   [Node 031] The node is ready to be used
2021-10-22T11:50:53.975Z CNTRLR « [Node 031] ping successful
2021-10-22T11:50:53.979Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:53.985Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:53.986Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:53.989Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:54.002Z SERIAL « 0x010700130a000002e3                                                 (9 bytes)
2021-10-22T11:50:54.003Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.005Z DRIVER « [REQ] [SendData]
                                    callback id:     10
                                    transmit status: OK
2021-10-22T11:50:54.015Z SERIAL » 0x01080013210100250bea                                              (10 bytes)
2021-10-22T11:50:54.016Z DRIVER » [Node 033] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      11
                                  └─[NoOperationCC]
2021-10-22T11:50:54.017Z CNTRLR   [Node 032] The node is alive.
2021-10-22T11:50:54.018Z CNTRLR   [Node 032] The node is ready to be used
2021-10-22T11:50:54.019Z CNTRLR « [Node 032] ping successful
2021-10-22T11:50:54.029Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:54.034Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:54.035Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.037Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:54.046Z SERIAL « 0x010700130b000002e2                                                 (9 bytes)
2021-10-22T11:50:54.046Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.048Z DRIVER « [REQ] [SendData]
                                    callback id:     11
                                    transmit status: OK
2021-10-22T11:50:54.059Z SERIAL » 0x01080013220100250cee                                              (10 bytes)
2021-10-22T11:50:54.060Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      12
                                  └─[NoOperationCC]
2021-10-22T11:50:54.061Z CNTRLR   [Node 033] The node is alive.
2021-10-22T11:50:54.062Z CNTRLR   [Node 033] The node is ready to be used
2021-10-22T11:50:54.063Z CNTRLR « [Node 033] ping successful
2021-10-22T11:50:54.074Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:54.076Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:54.077Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.081Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:54.116Z SERIAL « 0x010700130c000005e2                                                 (9 bytes)
2021-10-22T11:50:54.117Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.118Z DRIVER « [REQ] [SendData]
                                    callback id:     12
                                    transmit status: OK
2021-10-22T11:50:54.125Z SERIAL » 0x01080013230100250dee                                              (10 bytes)
2021-10-22T11:50:54.125Z DRIVER » [Node 035] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      13
                                  └─[NoOperationCC]
2021-10-22T11:50:54.127Z CNTRLR   [Node 034] The node is alive.
2021-10-22T11:50:54.127Z CNTRLR   [Node 034] The node is ready to be used
2021-10-22T11:50:54.128Z CNTRLR « [Node 034] ping successful
2021-10-22T11:50:54.140Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:54.143Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:54.144Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.146Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:54.182Z SERIAL « 0x010700130d000004e2                                                 (9 bytes)
2021-10-22T11:50:54.183Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.187Z DRIVER « [REQ] [SendData]
                                    callback id:     13
                                    transmit status: OK
2021-10-22T11:50:54.194Z SERIAL » 0x010800131a0100250ed4                                              (10 bytes)
2021-10-22T11:50:54.194Z DRIVER » [Node 026] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      14
                                  └─[NoOperationCC]
2021-10-22T11:50:54.197Z CNTRLR   [Node 035] The node is alive.
2021-10-22T11:50:54.198Z CNTRLR   [Node 035] The node is ready to be used
2021-10-22T11:50:54.199Z CNTRLR « [Node 035] ping successful
2021-10-22T11:50:54.209Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:50:54.215Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:50:54.215Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:54.217Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:50:58.338Z SERIAL « 0x010700130e01019d78                                                 (9 bytes)
2021-10-22T11:50:58.341Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:50:58.344Z DRIVER « [REQ] [SendData]
                                    callback id:     14
                                    transmit status: NoAck
2021-10-22T11:50:58.362Z CNTRLR   [Node 026] Node 26 did not respond after 1 attempts, it is presumed dead
2021-10-22T11:50:58.365Z CNTRLR   [Node 026] ping failed: Failed to send the command after 1 attempts (Status No
                                  Ack) (ZW0020)
2021-10-22T11:50:58.366Z CNTRLR   [Node 026] Interview attempt (1/5) failed, node is dead.
2021-10-22T11:51:11.340Z SERIAL » 0x010e001322076c018103260132250f17                                  (16 bytes)
2021-10-22T11:51:11.342Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      15
                                  └─[SupervisionCCGet]
                                    │ session id:      1
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 50
2021-10-22T11:51:11.345Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:51:11.351Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:51:11.352Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:11.353Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:51:11.398Z SERIAL « 0x010700130f000005e1                                                 (9 bytes)
2021-10-22T11:51:11.399Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:11.399Z DRIVER « [REQ] [SendData]
                                    callback id:     15
                                    transmit status: OK
2021-10-22T11:51:11.472Z SERIAL « 0x010b00040022056c02010000b8                                        (13 bytes)
2021-10-22T11:51:11.478Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:11.483Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          1
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s
2021-10-22T11:51:17.565Z SERIAL » 0x010e001322076c01820326013725100e                                  (16 bytes)
2021-10-22T11:51:17.567Z DRIVER » [Node 034] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      16
                                  └─[SupervisionCCGet]
                                    │ session id:      2
                                    │ request updates: true
                                    └─[MultilevelSwitchCCSet]
                                        target value: 55
2021-10-22T11:51:17.572Z SERIAL « [ACK]                                                                   (0x06)
2021-10-22T11:51:17.576Z SERIAL « 0x0104011301e8                                                       (6 bytes)
2021-10-22T11:51:17.577Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:17.578Z DRIVER « [RES] [SendData]
                                    was sent: true
2021-10-22T11:51:17.621Z SERIAL « 0x0107001310000004ff                                                 (9 bytes)
2021-10-22T11:51:17.622Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:17.623Z DRIVER « [REQ] [SendData]
                                    callback id:     16
                                    transmit status: OK
2021-10-22T11:51:17.692Z SERIAL « 0x010b00040022056c02020000bb                                        (13 bytes)
2021-10-22T11:51:17.693Z SERIAL » [ACK]                                                                   (0x06)
2021-10-22T11:51:17.695Z DRIVER « [Node 034] [REQ] [ApplicationCommand]
                                  └─[SupervisionCCReport]
                                      session id:          2
                                      more updates follow: false
                                      status:              NoSupport
                                      duration:            0s

InstallLog

$ iobroker url iobroker.zwave2@2.2.4 --host ubuntu

install iobroker.zwave2@2.2.4

NPM version: 6.14.15

npm install iobroker.zwave2@2.2.4 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call)

../src/linux/BluetoothSerialPort.cc:18:6: error: variable or field ‘InitAll’ declared void

18 | void InitAll(Handle<Object> exports) { | ^~~~~~~

../src/linux/BluetoothSerialPort.cc:18:14: error: ‘Handle’ was not declared in this scope 18 | void InitAll(Handle<Object> exports) { | ^~~~~~../src/linux/BluetoothSerialPort.cc:18:27: error: expected primary-expression before ‘>’ token 18 | void InitAll(Handle<Object> exports) { | ^

../src/linux/BluetoothSerialPort.cc:18:29: error: ‘exports’ was not declared in this scope

18 | void InitAll(Handle<Object> exports) { | ^~~~~~~

In file included from ../src/linux/BluetoothSerialPort.cc:12:

../src/linux/BluetoothSerialPort.cc:23:34: error: ‘InitAll’ was not declared in this scope 23 | NODE_MODULE(BluetoothSerialPort, InitAll) | ^~~~~~~/home/iobroker/.cache/node-gyp/12.22.7/include/node/node.h:736:36: note: in definition of macro ‘NODE_MODULE_X’ 736 | (node::addon_register_func) (regfunc), \ | ^~~~~~~../src/linux/BluetoothSerialPort.cc:23:1: note: in expansion of macro ‘NODE_MODULE’ 23 | NODE_MODULE(BluetoothSerialPort, InitAll) | ^~~~~~~~~~~

make: *** [BluetoothSerialPort.target.mk:115: Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPort.o] Error 1

gyp ERR! build error

gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stack at ChildProcess.emit (events.js:314:20)

gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12)

gyp ERR! System Linux 5.11.0-1019-raspigyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"gyp ERR! cwd /opt/iobroker/node_modules/node-bluetoothgyp ERR! node -v v12.22.7gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok

upload [18] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/zwave2.svg zwave2.svg image/svg+xml

upload [17] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/tab_m.html tab_m.html text/html

upload [16] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/style.css style.css text/css

upload [15] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/script/d3.min.js script/d3.min.js application/javascript

upload [14] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/log_window.html log_window.html text/html

upload [13] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/index_m.html index_m.html text/html

upload [12] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/tab.js.map build/tab.js.map application/json

upload [11] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/tab.js build/tab.js application/javascript

upload [10] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/log.js.map build/log.js.map application/json

upload [9] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/log.js build/log.js application/javascript

upload [8] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/index.js.map build/index.js.map application/json

upload [7] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/index.js build/index.js application/javascript

upload [6] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-MTOBDWCR.js.map build/chunk-MTOBDWCR.js.map application/json

upload [5] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-MTOBDWCR.js build/chunk-MTOBDWCR.js application/javascript

upload [4] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-LGH3N725.js.map build/chunk-LGH3N725.js.map application/json

upload [3] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-LGH3N725.js build/chunk-LGH3N725.js application/javascript

upload [2] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-BZNVH3F4.js.map build/chunk-BZNVH3F4.js.map application/json

upload [1] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/build/chunk-BZNVH3F4.js build/chunk-BZNVH3F4.js application/javascript

upload [0] zwave2.admin /opt/iobroker/node_modules/iobroker.zwave2/admin/.eslintrc.js .eslintrc.js application/javascript

Update "system.adapter.zwave2.0"

AlCalzone

@esmax666 Bitte mal den Node neu interviewen:

(ich seh grade, der Text neben dem Button ist falsch - bitte trotzdem draufklicken - halt bei Node 34)

Esmax666

@alcalzone

YEs!!!!

Rollo geht schon wieder nice !

Das kann ich glaich mit alle rollo hier machen oder ?

Danke

AlCalzone

@esmax666 Ich würde es gezielt nur bei denen machen, die Probleme haben.

Christian Werner

Hallo,
habe gerade das Update gemacht, danach aber vielleicht zu schnell auf "Interview All" - also noch bevor alle Nodes bei mir aktiv waren. Bin nun erstmal wieder zurück zur 1.10 (per Backup).

Aber die Frage ist von der Version 1.10.4 kommend.

Adapter Update dann ->

Setze ich die S2 Security Keys oder nicht ? (waren bei mir leer und ich hatte auf "Generate" geklickt. Der S0 Key war gesetzt)
Soll man dann ein Aktives Interview der Geräte machen oder passiert das von selbst?

Ich hatte einen Versuch 8 von 5 im Log vielleicht lief hier auch was doppelt, weil ich mit drauf geklickt hatte?

    [Node 007] Interview attempt (8/5) failed, node is dead.

Ich kann hier alles noch mal nachstellen oder testen - falls das was Hilft.

Grüße und Danke

Esmax666

@alcalzone
ok mache ich, ich hääte noch ein frage.

was heisst das genau ?

Gerät ist dead? muss neu kaufen ?

zwave2.0
	24906	2021-10-22 20:38:41.117	error	Node 26 interview failed: The node is dead

hat jemand schon sowas bekommen ?

2021-10-22T18:39:56.942Z CNTRLR   [Node 026] Beginning interview - last completed stage: None

2021-10-22T18:40:01.105Z SERIAL « 0x010700132801019e5d                                                 (9 bytes)

2021-10-22T18:40:01.109Z SERIAL » [ACK]                                                                   (0x06)

2021-10-22T18:40:01.112Z DRIVER « [REQ] [SendData]
                                    callback id:     40
                                    transmit status: NoAck

2021-10-22T18:40:01.119Z CNTRLR   [Node 026] Node 26 did not respond after 1 attempts, it is presumed dead

2021-10-22T18:40:01.121Z CNTRLR   [Node 026] ping failed: Failed to send the command after 1 attempts (Status No
                                  Ack) (ZW0020)

2021-10-22T18:40:01.121Z CNTRLR » [Node 026] querying node info...

2021-10-22T18:40:01.121Z CNTRLR » [Node 026] pinging the node...

2021-10-22T18:40:01.127Z SERIAL » 0x010800131a01002529f3                                              (10 bytes)

2021-10-22T18:40:01.128Z DRIVER » [Node 026] [REQ] [SendData]
                                  │ transmit options: 0x25
                                  │ callback id:      41
                                  └─[NoOperationCC]

2021-10-22T18:40:01.131Z SERIAL « [ACK]                                                                   (0x06)

2021-10-22T18:40:01.139Z SERIAL « 0x0104011301e8                                                       (6 bytes)

2021-10-22T18:40:01.139Z SERIAL » [ACK]                                                                   (0x06)

2021-10-22T18:40:01.140Z DRIVER « [RES] [SendData]
                                    was sent: true

2021-10-22T18:40:05.237Z SERIAL « 0x010700132901019b59                                                 (9 bytes)

2021-10-22T18:40:05.241Z SERIAL » [ACK]                                                                   (0x06)

2021-10-22T18:40:05.243Z DRIVER « [REQ] [SendData]
                                    callback id:     41
                                    transmit status: NoAck

2021-10-22T18:40:05.248Z CNTRLR   [Node 026] Node 26 did not respond after 1 attempts, it is presumed dead

2021-10-22T18:40:05.250Z CNTRLR   [Node 026] ping failed: Failed to send the command after 1 attempts (Status No
                                  Ack) (ZW0020)

2021-10-22T18:40:05.250Z CNTRLR   [Node 026] Interview attempt (1/5) failed, node is dead.

nodoe

Hallo zusammen,

ich habe versucht mein Danalock V3 zu includieren. Nach mehreren Versuchen hat das auch geklappt, allerdings sind die icon für S2 Authenticated und S2 Unauthenticated grau:
Bildschirmfoto 2021-10-23 um 15.23.23.png

Unter Door_Lock findet sich kein Eintrag wie targetMode o.ä., so dass ich das Schloss im iobroker nicht öffnen oder schließen kann:
Bildschirmfoto 2021-10-23 um 15.26.54.png

Per Smartlock-App funktioniert es. Habt Ihr eine Idee, woran das liegen kann?

Vielen Dank und schöne Grüße!

AlCalzone

@esmax666 sagte in Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...:

Gerät ist dead

Das heißt, dass es nicht antwortet. Kann mehrere Gründe haben:

schlechter Empfang -> Probier mal Netzwerk heilen
kein Strom -> Verkabelung checken

@nodoe

Nach mehreren Versuchen hat das auch geklappt, allerdings sind die icon für S2 Authenticated und S2 Unauthenticated grau

Das kann normal sein, z.B. wenn nur S2 Access Control (die höchste Klasse) angefragt wurde.

Unter Door_Lock findet sich kein Eintrag wie targetMode

Komisch - currentMode ist da. Lade mal die Ansicht im Admin neu. Wenn das nicht tut, neu interviewen.

NEWS

Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...

closed TechniSat / Flush Roller Shutter Switch does not support Supervision #3536

Support us

995
Online

31.6k
Users

79.5k
Topics

1.3m
Posts

NEWS

Test Adapter Z-Wave2 v2.2.x - Eine neue Ära beginnt...

closed TechniSat / Flush Roller Shutter Switch does not support Supervision #3536

Support us

995Online

31.6kUsers

79.5kTopics

1.3mPosts

995
Online

31.6k
Users

79.5k
Topics

1.3m
Posts