Admin :8081 Ladezeit: (fast) unendlich!
-
@rotamint
Ja, stell das auf ALLE 0.0.0.0. zurück.Ich sehe gerade, du hast den ble-Adapter an Bord. Schau mal wie viele Objekte der mitschleift. Das kann (wenn man das nicht anders einstellt) leicht in die Hunderttausende gehen. Dann geht im ioBroker nix mehr, auf der kleinen Hardware eines Pis.
Den Ansatz hatte der user in dem o. g. Link auch, anscheinend war es bei ihm auch die Lösung? Ich habe aber nicht verstanden, wie ich das herausfinden kann...
-
@rotamint Dann schmeiß den cups raus.
Mein Edit bzgl. ble hast du gesehen?pi@ioBroker:~ $ sudo remove cups sudo: remove: Befehl nicht gefunden pi@ioBroker:~ $Danke Thomas für den Hinweis mit BLE. Aber ... Wie kann ich das rausfinden, ob das der Übeltäter ist?
-
Den Ansatz hatte der user in dem o. g. Link auch, anscheinend war es bei ihm auch die Lösung? Ich habe aber nicht verstanden, wie ich das herausfinden kann...
-
pi@ioBroker:~ $ sudo remove cups sudo: remove: Befehl nicht gefunden pi@ioBroker:~ $Danke Thomas für den Hinweis mit BLE. Aber ... Wie kann ich das rausfinden, ob das der Übeltäter ist?
-
-
@rotamint
Okay, das passt. Dann ist das nicht die Bremse. -
pi@ioBroker:~ $ sudo remove cups sudo: remove: Befehl nicht gefunden pi@ioBroker:~ $Danke Thomas für den Hinweis mit BLE. Aber ... Wie kann ich das rausfinden, ob das der Übeltäter ist?
@rotamint sagte in Admin :8081 Ladezeit: (fast) unendlich!:
sudo remove cups
Muss
sudo apt remove cupsheißen.
-
Hält sich von den Geräten her im Rahmen.
Aber die Teile funken alle 5 bis 10sek.
Eventuell macht es die Masse. Quasi Kleinvieh macht auch Traffic :)
Aber ich denke daran sollte es nicht liegen. -
@haselchen Habe die Einstellungen von Dir übernommen, RSSI-Update war 60000 und der Haken darunter war gesetzt. Reboot. Und dann bin ich gespannt was dann passiert...
-
Unverändert
Edit... Unverändert wäre falsch. Aber die Ladezeit ist 63 Sekunden. Liegt das im "normalen Rahmen"? Bilde mir ein, dass es deutlich schneller war...
-
Unverändert
Edit... Unverändert wäre falsch. Aber die Ladezeit ist 63 Sekunden. Liegt das im "normalen Rahmen"? Bilde mir ein, dass es deutlich schneller war...
-
@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
free -ht --mega
HTOP während ich versuche, die Seite zu öffnen?
-
@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
free -ht --mega
HTOP während ich versuche, die Seite zu öffnen?
@rotamint
Ja, schau mal was sich da tut. Meist sieht man da einen Prozess der aus dem Ruder läuft. Entweder weil der CPU oder RAM frisst.Kann aber auch an der I/O-Last hängen. Und/oder Dateisystem.
-
@rotamint
Ja, schau mal was sich da tut. Meist sieht man da einen Prozess der aus dem Ruder läuft. Entweder weil der CPU oder RAM frisst.Kann aber auch an der I/O-Last hängen. Und/oder Dateisystem.
-
pi@ioBroker:~ $ free -ht --mega total used free shared buff/cache available Mem: 1,9G 857M 646M 16M 361M 1,0G Swap: 99M 0B 99M Total: 2,0G 857M 746M pi@ioBroker:~ $
@rotamint
RAM ist kein Thema. Aber der js-controller mit dem admin zusammen schnupfen deine CPU weg.Die Erklärung zu dem java-Zeuch bist du auch noch Schuldig geblieben, oder?
-
@rotamint
RAM ist kein Thema. Aber der js-controller mit dem admin zusammen schnupfen deine CPU weg.Die Erklärung zu dem java-Zeuch bist du auch noch Schuldig geblieben, oder?
@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
@rotamint
RAM ist kein Thema. Aber der js-controller mit dem admin zusammen schnupfen deine CPU weg.Die Erklärung zu dem java-Zeuch bist du auch noch Schuldig geblieben, oder?
Sag' mir was ich Dir dazu sagen soll... Ich weiss es nicht... Habe auf dem PI den ioBroker und PIVCCU3 laufen. Sonst nichts... -
@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
@rotamint
RAM ist kein Thema. Aber der js-controller mit dem admin zusammen schnupfen deine CPU weg.Die Erklärung zu dem java-Zeuch bist du auch noch Schuldig geblieben, oder?
Sag' mir was ich Dir dazu sagen soll... Ich weiss es nicht... Habe auf dem PI den ioBroker und PIVCCU3 laufen. Sonst nichts... -
@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
@rotamint
RAM ist kein Thema. Aber der js-controller mit dem admin zusammen schnupfen deine CPU weg.Die Erklärung zu dem java-Zeuch bist du auch noch Schuldig geblieben, oder?
Sag' mir was ich Dir dazu sagen soll... Ich weiss es nicht... Habe auf dem PI den ioBroker und PIVCCU3 laufen. Sonst nichts...@rotamint sagte in Admin :8081 Ladezeit: (fast) unendlich!:
PIVCCU3
Ja, das erklärt den Java-Kram.
Wobei der RAM-Verbrauch für zwei Dienste (piVCCU und ioBroker) erstaunlich niedrig ist. Hätte da mit mehr gerechnet.
Wobei zumindest im ioBroker auch eigentlich nix los ist.
Merkwürdig allemal...So langsam gehen mir die Ansätze aus.
Mal imdmesg -Tgeschaut ob da alles passt?
Node sauber?which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs -
@rotamint sagte in Admin :8081 Ladezeit: (fast) unendlich!:
PIVCCU3
Ja, das erklärt den Java-Kram.
Wobei der RAM-Verbrauch für zwei Dienste (piVCCU und ioBroker) erstaunlich niedrig ist. Hätte da mit mehr gerechnet.
Wobei zumindest im ioBroker auch eigentlich nix los ist.
Merkwürdig allemal...So langsam gehen mir die Ansätze aus.
Mal imdmesg -Tgeschaut ob da alles passt?
Node sauber?which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs@thomas-braun said in Admin :8081 Ladezeit: (fast) unendlich!:
@rotamint sagte in Admin :8081 Ladezeit: (fast) unendlich!:
PIVCCU3
Ja, das erklärt den Java-Kram.
Wobei der RAM-Verbrauch für zwei Dienste (piVCCU und ioBroker) erstaunlich niedrig ist. Hätte da mit mehr gerechnet.
Wobei zumindest im ioBroker auch eigentlich nix los ist.
Merkwürdig allemal...So langsam gehen mir die Ansätze aus.
Mal imdmesg -Tgeschaut ob da alles passt?
Ob da alles passt?
Entschuldige bitte, das kann ich nicht beurteilen :(pi@ioBroker:~ $ dmesg -T [Do Jun 3 00:26:13 2021] Booting Linux on physical CPU 0x0 [Do Jun 3 00:26:13 2021] Linux version 5.10.17-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1414 SMP Fri Apr 30 13:20:47 BST 2021 [Do Jun 3 00:26:13 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Do Jun 3 00:26:13 2021] CPU: div instructions available: patching division code [Do Jun 3 00:26:13 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Do Jun 3 00:26:13 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [Do Jun 3 00:26:13 2021] Memory policy: Data cache writealloc [Do Jun 3 00:26:13 2021] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [Do Jun 3 00:26:13 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Do Jun 3 00:26:13 2021] Zone ranges: [Do Jun 3 00:26:13 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Do Jun 3 00:26:13 2021] Normal empty [Do Jun 3 00:26:13 2021] HighMem [mem 0x0000000030000000-0x000000007fffffff] [Do Jun 3 00:26:13 2021] Movable zone start for each node [Do Jun 3 00:26:13 2021] Early memory node ranges [Do Jun 3 00:26:13 2021] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [Do Jun 3 00:26:13 2021] node 0: [mem 0x0000000040000000-0x000000007fffffff] [Do Jun 3 00:26:13 2021] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [Do Jun 3 00:26:13 2021] On node 0 totalpages: 504576 [Do Jun 3 00:26:13 2021] DMA zone: 2304 pages used for memmap [Do Jun 3 00:26:13 2021] DMA zone: 0 pages reserved [Do Jun 3 00:26:13 2021] DMA zone: 196608 pages, LIFO batch:63 [Do Jun 3 00:26:13 2021] HighMem zone: 307968 pages, LIFO batch:63 [Do Jun 3 00:26:13 2021] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [Do Jun 3 00:26:13 2021] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [Do Jun 3 00:26:13 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Do Jun 3 00:26:13 2021] Built 1 zonelists, mobility grouping on. Total pages: 502272 [Do Jun 3 00:26:13 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:29:45:E1 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=3f7f64c0-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Do Jun 3 00:26:13 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Do Jun 3 00:26:13 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Do Jun 3 00:26:13 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Do Jun 3 00:26:13 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Do Jun 3 00:26:13 2021] software IO TLB: mapped [mem 0x0000000019400000-0x000000001d400000] (64MB) [Do Jun 3 00:26:13 2021] Memory: 1646104K/2018304K available (10240K kernel code, 1358K rwdata, 3160K rodata, 2048K init, 890K bss, 110056K reserved, 262144K cma-reserved, 1231872K highmem) [Do Jun 3 00:26:13 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Do Jun 3 00:26:13 2021] ftrace: allocating 33942 entries in 67 pages [Do Jun 3 00:26:13 2021] ftrace: allocated 67 pages with 3 groups [Do Jun 3 00:26:13 2021] rcu: Hierarchical RCU implementation. [Do Jun 3 00:26:13 2021] Rude variant of Tasks RCU enabled. [Do Jun 3 00:26:13 2021] Tracing variant of Tasks RCU enabled. [Do Jun 3 00:26:13 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Do Jun 3 00:26:13 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Do Jun 3 00:26:13 2021] GIC: Using split EOI/Deactivate mode [Do Jun 3 00:26:13 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=0 [Do Jun 3 00:26:13 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Do Jun 3 00:26:13 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Do Jun 3 00:26:13 2021] bcm2835: system timer (irq = 25) [Do Jun 3 00:26:13 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Do Jun 3 00:26:13 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Do Jun 3 00:26:13 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Do Jun 3 00:26:13 2021] Switching to timer-based delay loop, resolution 18ns [Do Jun 3 00:26:13 2021] Console: colour dummy device 80x30 [Do Jun 3 00:26:13 2021] printk: console [tty1] enabled [Do Jun 3 00:26:13 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Do Jun 3 00:26:13 2021] pid_max: default: 32768 minimum: 301 [Do Jun 3 00:26:13 2021] LSM: Security Framework initializing [Do Jun 3 00:26:13 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Jun 3 00:26:13 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Do Jun 3 00:26:13 2021] Disabling memory control group subsystem [Do Jun 3 00:26:13 2021] CPU: Testing write buffer coherency: ok [Do Jun 3 00:26:13 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Do Jun 3 00:26:13 2021] Setting up static identity map for 0x200000 - 0x20003c [Do Jun 3 00:26:13 2021] rcu: Hierarchical SRCU implementation. [Do Jun 3 00:26:13 2021] smp: Bringing up secondary CPUs ... [Do Jun 3 00:26:13 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Do Jun 3 00:26:13 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Do Jun 3 00:26:13 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Do Jun 3 00:26:13 2021] smp: Brought up 1 node, 4 CPUs [Do Jun 3 00:26:13 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Do Jun 3 00:26:13 2021] CPU: All CPU(s) started in HYP mode. [Do Jun 3 00:26:13 2021] CPU: Virtualization extensions available. [Do Jun 3 00:26:13 2021] devtmpfs: initialized [Do Jun 3 00:26:13 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Do Jun 3 00:26:13 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Do Jun 3 00:26:13 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Do Jun 3 00:26:13 2021] pinctrl core: initialized pinctrl subsystem [Do Jun 3 00:26:13 2021] NET: Registered protocol family 16 [Do Jun 3 00:26:13 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Do Jun 3 00:26:13 2021] audit: initializing netlink subsys (disabled) [Do Jun 3 00:26:13 2021] audit: type=2000 audit(0.010:1): state=initialized audit_enabled=0 res=1 [Do Jun 3 00:26:13 2021] thermal_sys: Registered thermal governor 'step_wise' [Do Jun 3 00:26:13 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Do Jun 3 00:26:13 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Do Jun 3 00:26:13 2021] Serial: AMBA PL011 UART driver [Do Jun 3 00:26:13 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Do Jun 3 00:26:13 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T13:45:52, variant start [Do Jun 3 00:26:13 2021] raspberrypi-firmware soc:firmware: Firmware hash is d7f29d96450abfc77cd6cf011af1faf1e03e5e56 [Do Jun 3 00:26:13 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Do Jun 3 00:26:13 2021] vgaarb: loaded [Do Jun 3 00:26:13 2021] SCSI subsystem initialized [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver usbfs [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver hub [Do Jun 3 00:26:13 2021] usbcore: registered new device driver usb [Do Jun 3 00:26:13 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Do Jun 3 00:26:13 2021] clocksource: Switched to clocksource arch_sys_counter [Do Jun 3 00:26:13 2021] VFS: Disk quotas dquot_6.6.0 [Do Jun 3 00:26:13 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Do Jun 3 00:26:13 2021] FS-Cache: Loaded [Do Jun 3 00:26:13 2021] CacheFiles: Loaded [Do Jun 3 00:26:13 2021] simple-framebuffer 3e6bb000.framebuffer: framebuffer at 0x3e6bb000, 0x408000 bytes, mapped to 0x(ptrval) [Do Jun 3 00:26:13 2021] simple-framebuffer 3e6bb000.framebuffer: format=a8r8g8b8, mode=1366x768x32, linelength=5504 [Do Jun 3 00:26:13 2021] Console: switching to colour frame buffer device 170x48 [Do Jun 3 00:26:13 2021] simple-framebuffer 3e6bb000.framebuffer: fb0: simplefb registered! [Do Jun 3 00:26:13 2021] NET: Registered protocol family 2 [Do Jun 3 00:26:13 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Do Jun 3 00:26:13 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Do Jun 3 00:26:13 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Do Jun 3 00:26:13 2021] TCP: Hash tables configured (established 8192 bind 8192) [Do Jun 3 00:26:13 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Jun 3 00:26:13 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Do Jun 3 00:26:13 2021] NET: Registered protocol family 1 [Do Jun 3 00:26:13 2021] RPC: Registered named UNIX socket transport module. [Do Jun 3 00:26:13 2021] RPC: Registered udp transport module. [Do Jun 3 00:26:13 2021] RPC: Registered tcp transport module. [Do Jun 3 00:26:13 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Do Jun 3 00:26:13 2021] PCI: CLS 0 bytes, default 64 [Do Jun 3 00:26:13 2021] Initialise system trusted keyrings [Do Jun 3 00:26:13 2021] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [Do Jun 3 00:26:13 2021] zbud: loaded [Do Jun 3 00:26:13 2021] FS-Cache: Netfs 'nfs' registered for caching [Do Jun 3 00:26:13 2021] NFS: Registering the id_resolver key type [Do Jun 3 00:26:13 2021] Key type id_resolver registered [Do Jun 3 00:26:13 2021] Key type id_legacy registered [Do Jun 3 00:26:13 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Do Jun 3 00:26:13 2021] Key type asymmetric registered [Do Jun 3 00:26:13 2021] Asymmetric key parser 'x509' registered [Do Jun 3 00:26:13 2021] bounce: pool size: 64 pages [Do Jun 3 00:26:13 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Do Jun 3 00:26:13 2021] io scheduler mq-deadline registered [Do Jun 3 00:26:13 2021] io scheduler kyber registered [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000 [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Do Jun 3 00:26:13 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Do Jun 3 00:26:13 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Do Jun 3 00:26:13 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Do Jun 3 00:26:13 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Do Jun 3 00:26:13 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Do Jun 3 00:26:13 2021] PCI: bus0: Fast back to back transfers disabled [Do Jun 3 00:26:13 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Do Jun 3 00:26:13 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Do Jun 3 00:26:13 2021] pci 0000:01:00.0: PME# supported from D0 D3cold [Do Jun 3 00:26:13 2021] PCI: bus1: Fast back to back transfers disabled [Do Jun 3 00:26:13 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Do Jun 3 00:26:13 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Do Jun 3 00:26:13 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Do Jun 3 00:26:13 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Do Jun 3 00:26:13 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Do Jun 3 00:26:13 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 64 [Do Jun 3 00:26:13 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Do Jun 3 00:26:13 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Jun 3 00:26:13 2021] iproc-rng200 fe104000.rng: hwrng registered [Do Jun 3 00:26:13 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [Do Jun 3 00:26:13 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Do Jun 3 00:26:13 2021] brd: module loaded [Do Jun 3 00:26:13 2021] loop: module loaded [Do Jun 3 00:26:13 2021] Loading iSCSI transport class v2.0-870. [Do Jun 3 00:26:13 2021] libphy: Fixed MDIO Bus: probed [Do Jun 3 00:26:13 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Do Jun 3 00:26:13 2021] libphy: bcmgenet MII bus: probed [Do Jun 3 00:26:13 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver r8152 [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver lan78xx [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver smsc95xx [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890 [Do Jun 3 00:26:13 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Do Jun 3 00:26:13 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Jun 3 00:26:13 2021] usb usb1: Product: xHCI Host Controller [Do Jun 3 00:26:13 2021] usb usb1: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Jun 3 00:26:13 2021] usb usb1: SerialNumber: 0000:01:00.0 [Do Jun 3 00:26:13 2021] hub 1-0:1.0: USB hub found [Do Jun 3 00:26:13 2021] hub 1-0:1.0: 1 port detected [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Do Jun 3 00:26:13 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Do Jun 3 00:26:13 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Do Jun 3 00:26:13 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Do Jun 3 00:26:13 2021] usb usb2: Product: xHCI Host Controller [Do Jun 3 00:26:13 2021] usb usb2: Manufacturer: Linux 5.10.17-v7l+ xhci-hcd [Do Jun 3 00:26:13 2021] usb usb2: SerialNumber: 0000:01:00.0 [Do Jun 3 00:26:13 2021] hub 2-0:1.0: USB hub found [Do Jun 3 00:26:13 2021] hub 2-0:1.0: 4 ports detected [Do Jun 3 00:26:13 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Do Jun 3 00:26:13 2021] dwc_otg: FIQ enabled [Do Jun 3 00:26:13 2021] dwc_otg: NAK holdoff enabled [Do Jun 3 00:26:13 2021] dwc_otg: FIQ split-transaction FSM enabled [Do Jun 3 00:26:13 2021] Module dwc_common_port init [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver uas [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver usb-storage [Do Jun 3 00:26:13 2021] mousedev: PS/2 mouse device common for all mice [Do Jun 3 00:26:13 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Do Jun 3 00:26:13 2021] sdhci: Secure Digital Host Controller Interface driver [Do Jun 3 00:26:13 2021] sdhci: Copyright(c) Pierre Ossman [Do Jun 3 00:26:13 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Do Jun 3 00:26:13 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Do Jun 3 00:26:13 2021] ledtrig-cpu: registered to indicate activity on CPUs [Do Jun 3 00:26:13 2021] hid: raw HID events driver (C) Jiri Kosina [Do Jun 3 00:26:13 2021] usbcore: registered new interface driver usbhid [Do Jun 3 00:26:13 2021] usbhid: USB HID core driver [Do Jun 3 00:26:13 2021] Initializing XFRM netlink socket [Do Jun 3 00:26:13 2021] NET: Registered protocol family 17 [Do Jun 3 00:26:13 2021] Key type dns_resolver registered [Do Jun 3 00:26:13 2021] Registering SWP/SWPB emulation handler [Do Jun 3 00:26:13 2021] registered taskstats version 1 [Do Jun 3 00:26:13 2021] Loading compiled-in X.509 certificates [Do Jun 3 00:26:13 2021] Key type ._fscrypt registered [Do Jun 3 00:26:13 2021] Key type .fscrypt registered [Do Jun 3 00:26:13 2021] Key type fscrypt-provisioning registered [Do Jun 3 00:26:13 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Do Jun 3 00:26:13 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 31250000) is a 16550 [Do Jun 3 00:26:13 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Do Jun 3 00:26:13 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Do Jun 3 00:26:13 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Do Jun 3 00:26:13 2021] of_cfs_init [Do Jun 3 00:26:13 2021] of_cfs_init: OK [Do Jun 3 00:26:13 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Do Jun 3 00:26:13 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Jun 3 00:26:13 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Jun 3 00:26:13 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Do Jun 3 00:26:13 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Do Jun 3 00:26:13 2021] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [Do Jun 3 00:26:13 2021] Waiting for root device PARTUUID=3f7f64c0-02... [Do Jun 3 00:26:13 2021] random: fast init done [Do Jun 3 00:26:13 2021] mmc1: new high speed SDIO card at address 0001 [Do Jun 3 00:26:14 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Do Jun 3 00:26:14 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Do Jun 3 00:26:14 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Do Jun 3 00:26:14 2021] usb 1-1: Product: USB2.0 Hub [Do Jun 3 00:26:14 2021] hub 1-1:1.0: USB hub found [Do Jun 3 00:26:14 2021] hub 1-1:1.0: 4 ports detected [Do Jun 3 00:26:14 2021] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [Do Jun 3 00:26:14 2021] usb 2-2: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [Do Jun 3 00:26:14 2021] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Do Jun 3 00:26:14 2021] usb 2-2: Product: SanDisk 3.2Gen1 [Do Jun 3 00:26:14 2021] usb 2-2: Manufacturer: USB [Do Jun 3 00:26:14 2021] usb 2-2: SerialNumber: 0901d40ee6d6c907fffd9b54f175d97926190249f8368e9392b6838e36b6e326cbcb000000000000000000002d143bfeff92642081558107292a8ab3 [Do Jun 3 00:26:14 2021] usb-storage 2-2:1.0: USB Mass Storage device detected [Do Jun 3 00:26:14 2021] scsi host0: usb-storage 2-2:1.0 [Do Jun 3 00:26:14 2021] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [Do Jun 3 00:26:14 2021] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Do Jun 3 00:26:14 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Do Jun 3 00:26:14 2021] usb 1-1.4: Product: ConBee II [Do Jun 3 00:26:14 2021] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Do Jun 3 00:26:14 2021] usb 1-1.4: SerialNumber: DE2199194 [Do Jun 3 00:26:15 2021] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [Do Jun 3 00:26:15 2021] sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [Do Jun 3 00:26:15 2021] sd 0:0:0:0: [sda] Write Protect is off [Do Jun 3 00:26:15 2021] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [Do Jun 3 00:26:15 2021] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [Do Jun 3 00:26:15 2021] sda: sda1 sda2 [Do Jun 3 00:26:15 2021] sd 0:0:0:0: [sda] Attached SCSI removable disk [Do Jun 3 00:26:15 2021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Do Jun 3 00:26:15 2021] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Do Jun 3 00:26:15 2021] devtmpfs: mounted [Do Jun 3 00:26:15 2021] Freeing unused kernel memory: 2048K [Do Jun 3 00:26:15 2021] Run /sbin/init as init process [Do Jun 3 00:26:15 2021] with arguments: [Do Jun 3 00:26:15 2021] /sbin/init [Do Jun 3 00:26:15 2021] splash [Do Jun 3 00:26:15 2021] with environment: [Do Jun 3 00:26:15 2021] HOME=/ [Do Jun 3 00:26:15 2021] TERM=linux [Do Jun 3 00:26:15 2021] systemd[1]: System time before build time, advancing clock. [Do Jun 3 00:26:15 2021] NET: Registered protocol family 10 [Do Jun 3 00:26:15 2021] Segment Routing with IPv6 [Do Jun 3 00:26:15 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Do Jun 3 00:26:15 2021] systemd[1]: Detected architecture arm. [Do Jun 3 00:26:15 2021] systemd[1]: Set hostname to <ioBroker>. [Do Jun 3 00:26:16 2021] systemd[1]: /lib/systemd/system/pivccu.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/pivccu3.pid → /run/pivccu3.pid; please update the unit file accordingly. [Do Jun 3 00:26:16 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Jun 3 00:26:16 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Jun 3 00:26:16 2021] systemd[1]: Listening on udev Control Socket. [Do Jun 3 00:26:16 2021] random: systemd: uninitialized urandom read (16 bytes read) [Do Jun 3 00:26:16 2021] systemd[1]: Listening on Journal Socket. [Do Jun 3 00:26:16 2021] systemd[1]: Starting Set the console keyboard layout... [Do Jun 3 00:26:16 2021] systemd[1]: Starting Load Kernel Modules... [Do Jun 3 00:26:16 2021] systemd[1]: Mounting RPC Pipe File System... [Do Jun 3 00:26:16 2021] systemd[1]: Starting Restore / save the current clock... [Do Jun 3 00:26:16 2021] i2c /dev entries driver [Do Jun 3 00:26:16 2021] EXT4-fs (sda2): re-mounted. Opts: (null) [Do Jun 3 00:26:16 2021] systemd-journald[119]: Received request to flush runtime journal from PID 1 [Do Jun 3 00:26:17 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Do Jun 3 00:26:17 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Do Jun 3 00:26:17 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Do Jun 3 00:26:17 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Do Jun 3 00:26:17 2021] mc: Linux media interface: v0.10 [Do Jun 3 00:26:17 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Do Jun 3 00:26:17 2021] [vc_sm_connected_init]: start [Do Jun 3 00:26:17 2021] [vc_sm_connected_init]: installed successfully [Do Jun 3 00:26:17 2021] generic_raw_uart: loading out-of-tree module taints kernel. [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: there is not valid maps for state default [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: I2C adapter of configured RTC device is not yet initialized [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: failed to initialize generic_raw_uart module [Do Jun 3 00:26:17 2021] bcm2835_audio bcm2835_audio: card created with 4 channels [Do Jun 3 00:26:17 2021] videodev: Linux video capture interface: v2.00 [Do Jun 3 00:26:17 2021] bcm2835_audio bcm2835_audio: card created with 4 channels [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: there is not valid maps for state default [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: I2C adapter of configured RTC device is not yet initialized [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: failed to initialize generic_raw_uart module [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: there is not valid maps for state default [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: Missing I2C driver of rtc device, trying to load [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: Requesting module i2c:rx8130-legacy [Do Jun 3 00:26:17 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] rtc-rx8130 1-0032: Unable to read registers #28..#30 [Do Jun 3 00:26:17 2021] i2c i2c-1: probing for rx8130 failed [Do Jun 3 00:26:17 2021] rtc-rx8130: probe of 1-0032 failed with error -121 [Do Jun 3 00:26:17 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] rtc-rx8130 1-0032: Unable to read registers #28..#30 [Do Jun 3 00:26:17 2021] i2c i2c-1: probing for rx8130 failed [Do Jun 3 00:26:17 2021] rtc-rx8130: probe of 1-0032 failed with error -121 [Do Jun 3 00:26:17 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Do Jun 3 00:26:17 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Do Jun 3 00:26:17 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Do Jun 3 00:26:17 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Do Jun 3 00:26:17 2021] checking generic (3e6bb000 408000) vs hw (0 ffffffffffffffff) [Do Jun 3 00:26:17 2021] fb0: switching to vc4drmfb from simple [Do Jun 3 00:26:17 2021] Console: switching to colour dummy device 80x30 [Do Jun 3 00:26:17 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Do Jun 3 00:26:17 2021] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [Do Jun 3 00:26:17 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Do Jun 3 00:26:17 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Do Jun 3 00:26:17 2021] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [Do Jun 3 00:26:17 2021] usbcore: registered new interface driver cdc_acm [Do Jun 3 00:26:17 2021] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [Do Jun 3 00:26:17 2021] pl011_raw_uart fe201000.serial: Initialized pl011 device; mapbase=0xfe201000; irq=36; clockrate=48000001 [Do Jun 3 00:26:17 2021] sd 0:0:0:0: Attached scsi generic sg0 type 0 [Do Jun 3 00:26:17 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Do Jun 3 00:26:17 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Do Jun 3 00:26:17 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Jun 3 00:26:17 2021] usbcore: registered new interface driver brcmfmac [Do Jun 3 00:26:17 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [Do Jun 3 00:26:17 2021] Console: switching to colour frame buffer device 240x67 [Do Jun 3 00:26:17 2021] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [Do Jun 3 00:26:17 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Do Jun 3 00:26:17 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Do Jun 3 00:26:18 2021] random: crng init done [Do Jun 3 00:26:18 2021] random: 7 urandom warning(s) missed due to ratelimiting [Do Jun 3 00:26:18 2021] new mount options do not match the existing superblock, will be ignored [Do Jun 3 00:26:18 2021] fuse: init (API version 7.32) [Do Jun 3 00:26:19 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:10 across:249852k FS [Do Jun 3 00:26:19 2021] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [Do Jun 3 00:26:19 2021] br0: port 1(eth0) entered blocking state [Do Jun 3 00:26:19 2021] br0: port 1(eth0) entered disabled state [Do Jun 3 00:26:19 2021] device eth0 entered promiscuous mode [Do Jun 3 00:26:19 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Do Jun 3 00:26:19 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [Do Jun 3 00:26:20 2021] br0: port 1(eth0) entered blocking state [Do Jun 3 00:26:20 2021] br0: port 1(eth0) entered forwarding state [Do Jun 3 00:26:20 2021] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [Do Jun 3 00:26:23 2021] raw-uart raw-uart: Reset radio module [Do Jun 3 00:26:25 2021] Bluetooth: Core ver 2.22 [Do Jun 3 00:26:25 2021] NET: Registered protocol family 31 [Do Jun 3 00:26:25 2021] Bluetooth: HCI device and connection manager initialized [Do Jun 3 00:26:25 2021] Bluetooth: HCI socket layer initialized [Do Jun 3 00:26:25 2021] Bluetooth: L2CAP socket layer initialized [Do Jun 3 00:26:25 2021] Bluetooth: SCO socket layer initialized [Do Jun 3 00:26:25 2021] Bluetooth: HCI UART driver ver 2.3 [Do Jun 3 00:26:25 2021] Bluetooth: HCI UART protocol H4 registered [Do Jun 3 00:26:25 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Do Jun 3 00:26:25 2021] Bluetooth: HCI UART protocol Broadcom registered [Do Jun 3 00:26:25 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Do Jun 3 00:26:25 2021] Bluetooth: BNEP filters: protocol multicast [Do Jun 3 00:26:25 2021] Bluetooth: BNEP socket layer initialized [Do Jun 3 00:26:32 2021] br0: port 2(vethpivccu) entered blocking state [Do Jun 3 00:26:32 2021] br0: port 2(vethpivccu) entered disabled state [Do Jun 3 00:26:32 2021] device vethpivccu entered promiscuous mode [Do Jun 3 00:26:33 2021] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [Do Jun 3 00:26:33 2021] eth0: renamed from vethLOFQS1 [Do Jun 3 00:26:33 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Do Jun 3 00:26:33 2021] IPv6: ADDRCONF(NETDEV_CHANGE): vethpivccu: link becomes ready [Do Jun 3 00:26:33 2021] br0: port 2(vethpivccu) entered blocking state [Do Jun 3 00:26:33 2021] br0: port 2(vethpivccu) entered forwarding state [Do Jun 3 00:26:37 2021] FS-Cache: Netfs 'cifs' registered for caching [Do Jun 3 00:26:37 2021] Key type cifs.spnego registered [Do Jun 3 00:26:37 2021] Key type cifs.idmap registered [Do Jun 3 00:26:37 2021] CIFS: Attempting to mount //192.168.1.3/IoBroker_Backup/ [Do Jun 3 00:26:37 2021] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [Do Jun 3 00:26:44 2021] eq3loop: created slave mmd_hmip [Do Jun 3 00:26:44 2021] eq3loop: created slave mmd_bidcos [Do Jun 3 00:26:44 2021] vcc-sd: disabling [Do Jun 3 00:26:46 2021] eq3loop: eq3loop_open_slave() mmd_bidcos [Do Jun 3 00:26:56 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Do Jun 3 00:26:56 2021] eq3loop: eq3loop_close_slave() mmd_hmip [Do Jun 3 00:26:56 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Do Jun 3 00:26:56 2021] eq3loop: eq3loop_close_slave() mmd_hmip [Do Jun 3 00:26:56 2021] eq3loop: eq3loop_open_slave() mmd_hmip pi@ioBroker:~ $ pi@ioBroker:~ $Node sauber?
which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejspi@ioBroker:~ $ which nodejs node npm && nodejs -v && node -v && npm -v && apt policy nodejs /usr/bin/nodejs /usr/bin/node /usr/bin/npm v14.17.0 v14.17.0 6.14.13 nodejs: Installiert: 14.17.0-1nodesource1 Installationskandidat: 14.17.0-1nodesource1 Versionstabelle: *** 14.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_14.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages pi@ioBroker:~ $
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden577
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge