[gelöst]Zigbee startet nach Update nicht mehr
-
@thomas-braun ist wahrscheinlich im proxmox terminal
Ist es nicht noch ratsam den npm cache zu löschen?
-
@thomas-braun ich geb heute abend mal ein update, npm cache clean probier ich aus.
-
@amg_666 Also, nochmal angemeldet, nicht über proxmox Konsole sondern über PuTTY und mit einem "normalen" user, nicht root.
iobroker fixer:andreas@iobroker:/opt/iobroker$ curl -sL https://iobroker.net/fix.sh | bash - library: loaded Library version=2021-04-07 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2021-04-07 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== [sudo] password for andreas: Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://ftp.debian.org/debian buster InRelease Hit:3 http://ftp.debian.org/debian buster-updates InRelease Hit:4 https://deb.nodesource.com/node_14.x buster InRelease Reading package lists... Done Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== andreas@iobroker:/opt/iobroker$ iobroker startnpm cache clean habe ich nicht gemacht, weil er am meckern war dass das nicht notwendig ist:
andreas@iobroker:/opt/iobroker$ npm cache clean npm ERR! As of npm@5, the npm cache self-heals from corruption issues and data e xtracted from the cache is guaranteed to be valid. If you want to make sure ever ything is consistent, use 'npm cache verify' instead. On the other hand, if you' re debugging an issue with the installer, you can use `npm install --cache /tmp/ empty-cache` to use a temporary cache instead of nuking the actual one. npm ERR! npm ERR! If you're sure you want to delete the entire cache, rerun this command with --force. npm ERR! A complete log of this run can be found in: npm ERR! /home/andreas/.npm/_logs/2021-04-16T11_16_38_943Z-debug.log andreas@iobroker:/opt/iobroker$ npm cache clean npm ERR! As of npm@5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use 'npm cache verify' instead. On the other hand, if you're debugging an issue with the installer, you can use `npm install --cache /tmp/empty-cache` to use a temporary cache instead of nuking the actual one. npm ERR! npm ERR! If you're sure you want to delete the entire cache, rerun this command with --force. npm ERR! A complete log of this run can be found in: npm ERR! /home/andreas/.npm/_logs/2021-04-16T11_17_02_316Z-debug.lognpm cache verifiy liefert
andreas@iobroker:/opt/iobroker$ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 1 (1535980 bytes) Content garbage-collected: 1 (1535980 bytes) Index entries: 1 Finished in 0.129sUpdate des Adapters aus der Adminoberfläche liefert wieder den Fehler
Fertig mit Fehler: internal/modules/cjs/loader.js:883 throw err; ^Error: Cannot find module 'mime'Require stack:- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15) at Function.Module._load (internal/modules/cjs/loader.js:725:27) at Module.require (internal/modules/cjs/loader.js:952:19) at require (internal/modules/cjs/helpers.js:88:18) at Upload.uploadAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js:525:24) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:225:28 at installNpm (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2557:9) at finishUpgrade (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:205:13) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:419:21 at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:223:55 { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ]}log bringt danach Fehler auch bei anderen Adaptern:
host.iobroker 2021-04-16 13:48:01.038 error Please consider running the installation fixer when on Linux. host.iobroker 2021-04-16 13:48:01.037 error could not store process id list in /opt/iobroker/node_modules/iobroker.js-controller/pids.txt! Please check permissions and user ownership of this file. Was ioBroker started as a different user? Pleas host.iobroker 2021-04-16 13:48:00.154 error instance system.adapter.daswetter.0 terminated with code 10 (CANNOT_FIND_ADAPTER_DIR) host.iobroker 2021-04-16 13:48:00.036 info instance system.adapter.daswetter.0 started with pid 4600 host.iobroker 2021-04-16 13:45:33.904 info iobroker exit 1 host.iobroker 2021-04-16 13:45:33.894 error iobroker internal/modules/cjs/loader.js:883 throw err; ^Error: Cannot find module 'mime'Require stack:- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js- /opt/iobroker/node host.iobroker 2021-04-16 13:45:01.042 error Please consider running the installation fixer when on Linux. host.iobroker 2021-04-16 13:45:01.041 error could not store process id list in /opt/iobroker/node_modules/iobroker.js-controller/pids.txt! Please check permissions and user ownership of this file. Was ioBroker started as a different user? Pleas host.iobroker 2021-04-16 13:45:00.238 error instance system.adapter.ical.3 terminated with code 10 (CANNOT_FIND_ADAPTER_DIR) host.iobroker 2021-04-16 13:45:00.040 info instance system.adapter.ical.3 started with pid 4593 smartmeter.0 2021-04-16 13:44:42.876 info (13972) Received 10 values, 5 updated javascript.0 2021-04-16 13:44:09.934 info (3766) script.js.common.Statusanzeige_gross: request: http://192.168.2.82/cm?cmnd=Led11 0,0,0 web.0 2021-04-16 13:44:08.366 info (3962) ==>Connected system.user.admin from ::ffff:192.168.2.105 web.0 2021-04-16 13:44:08.298 info (3962) <==Disconnect system.user.admin from ::ffff:192.168.2.105 flot host.iobroker 2021-04-16 13:43:47.278 info iobroker info sharp Using cached /home/iobroker/.npm/_libvips/libvips-8.10.0-linux-x64.tar.br host.iobroker 2021-04-16 13:40:09.986 info instance system.adapter.ical.2 terminated with code 0 (NO_ERROR) ical.2 2021-04-16 13:40:09.408 info (4261) Terminated (NO_ERROR): Without reason ical.2 2021-04-16 13:40:04.076 info (4261) processing URL: Geburtstag https://calendar.google.com/calendar/ical/lqbnk2mjfq76g1pq1mg0v962q4%40group.calendar.google.com/private-3381bd6686823f0e378489decbeb2378/basic.ics host.iobroker 2021-04-16 13:40:03.751 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.iobroker 2021-04-16 13:40:03.490 info iobroker NPM version: 6.14.12npm install iobroker.zigbee@1.5.1 --loglevel error --prefix "/opt/iobroker" (System call) ical.2 2021-04-16 13:40:03.097 info (4261) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.ical, node: v14.16.1, js-controller: 3.2.16 zigbee.0 2021-04-16 13:40:03.118 info (3977) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-04-16 13:40:03.117 info (3977) terminating zigbee.0 2021-04-16 13:40:02.783 info (3977) Zigbee: disabling joining new devices. zigbee.0 2021-04-16 13:40:02.781 info (3977) cleaned everything up... zigbee.0 2021-04-16 13:40:02.780 info (3977) Got terminate signal TERMINATE_YOURSELF host.iobroker 2021-04-16 13:40:02.820 info stopInstance system.adapter.zigbee.0 send kill signal host.iobroker 2021-04-16 13:40:02.763 info stopInstance system.adapter.zigbee.0 (force=false, process=true) host.iobroker 2021-04-16 13:40:02.762 info "system.adapter.zigbee.0" disabled host.iobroker 2021-04-16 13:40:02.709 info iobroker host.iobroker Adapter "system.adapter.zigbee.0" is stopped. host.iobroker 2021-04-16 13:40:02.637 info iobroker Update zigbee from @1.4.4 to @1.5.1 host.iobroker 2021-04-16 13:40:00.449 info instance system.adapter.ical.2 started with pid 4261 host.iobroker 2021-04-16 13:40:00.203 info iobroker upgrade zigbeeiobroker auf proxmox container
-
@amg_666 Also, nochmal angemeldet, nicht über proxmox Konsole sondern über PuTTY und mit einem "normalen" user, nicht root.
iobroker fixer:andreas@iobroker:/opt/iobroker$ curl -sL https://iobroker.net/fix.sh | bash - library: loaded Library version=2021-04-07 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2021-04-07 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== [sudo] password for andreas: Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://ftp.debian.org/debian buster InRelease Hit:3 http://ftp.debian.org/debian buster-updates InRelease Hit:4 https://deb.nodesource.com/node_14.x buster InRelease Reading package lists... Done Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== andreas@iobroker:/opt/iobroker$ iobroker startnpm cache clean habe ich nicht gemacht, weil er am meckern war dass das nicht notwendig ist:
andreas@iobroker:/opt/iobroker$ npm cache clean npm ERR! As of npm@5, the npm cache self-heals from corruption issues and data e xtracted from the cache is guaranteed to be valid. If you want to make sure ever ything is consistent, use 'npm cache verify' instead. On the other hand, if you' re debugging an issue with the installer, you can use `npm install --cache /tmp/ empty-cache` to use a temporary cache instead of nuking the actual one. npm ERR! npm ERR! If you're sure you want to delete the entire cache, rerun this command with --force. npm ERR! A complete log of this run can be found in: npm ERR! /home/andreas/.npm/_logs/2021-04-16T11_16_38_943Z-debug.log andreas@iobroker:/opt/iobroker$ npm cache clean npm ERR! As of npm@5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use 'npm cache verify' instead. On the other hand, if you're debugging an issue with the installer, you can use `npm install --cache /tmp/empty-cache` to use a temporary cache instead of nuking the actual one. npm ERR! npm ERR! If you're sure you want to delete the entire cache, rerun this command with --force. npm ERR! A complete log of this run can be found in: npm ERR! /home/andreas/.npm/_logs/2021-04-16T11_17_02_316Z-debug.lognpm cache verifiy liefert
andreas@iobroker:/opt/iobroker$ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 1 (1535980 bytes) Content garbage-collected: 1 (1535980 bytes) Index entries: 1 Finished in 0.129sUpdate des Adapters aus der Adminoberfläche liefert wieder den Fehler
Fertig mit Fehler: internal/modules/cjs/loader.js:883 throw err; ^Error: Cannot find module 'mime'Require stack:- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js- /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (internal/modules/cjs/loader.js:880:15) at Function.Module._load (internal/modules/cjs/loader.js:725:27) at Module.require (internal/modules/cjs/loader.js:952:19) at require (internal/modules/cjs/helpers.js:88:18) at Upload.uploadAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js:525:24) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:225:28 at installNpm (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:2557:9) at finishUpgrade (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:205:13) at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js:419:21 at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupInstall.js:223:55 { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpgrade.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' ]}log bringt danach Fehler auch bei anderen Adaptern:
host.iobroker 2021-04-16 13:48:01.038 error Please consider running the installation fixer when on Linux. host.iobroker 2021-04-16 13:48:01.037 error could not store process id list in /opt/iobroker/node_modules/iobroker.js-controller/pids.txt! Please check permissions and user ownership of this file. Was ioBroker started as a different user? Pleas host.iobroker 2021-04-16 13:48:00.154 error instance system.adapter.daswetter.0 terminated with code 10 (CANNOT_FIND_ADAPTER_DIR) host.iobroker 2021-04-16 13:48:00.036 info instance system.adapter.daswetter.0 started with pid 4600 host.iobroker 2021-04-16 13:45:33.904 info iobroker exit 1 host.iobroker 2021-04-16 13:45:33.894 error iobroker internal/modules/cjs/loader.js:883 throw err; ^Error: Cannot find module 'mime'Require stack:- /opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupUpload.js- /opt/iobroker/node host.iobroker 2021-04-16 13:45:01.042 error Please consider running the installation fixer when on Linux. host.iobroker 2021-04-16 13:45:01.041 error could not store process id list in /opt/iobroker/node_modules/iobroker.js-controller/pids.txt! Please check permissions and user ownership of this file. Was ioBroker started as a different user? Pleas host.iobroker 2021-04-16 13:45:00.238 error instance system.adapter.ical.3 terminated with code 10 (CANNOT_FIND_ADAPTER_DIR) host.iobroker 2021-04-16 13:45:00.040 info instance system.adapter.ical.3 started with pid 4593 smartmeter.0 2021-04-16 13:44:42.876 info (13972) Received 10 values, 5 updated javascript.0 2021-04-16 13:44:09.934 info (3766) script.js.common.Statusanzeige_gross: request: http://192.168.2.82/cm?cmnd=Led11 0,0,0 web.0 2021-04-16 13:44:08.366 info (3962) ==>Connected system.user.admin from ::ffff:192.168.2.105 web.0 2021-04-16 13:44:08.298 info (3962) <==Disconnect system.user.admin from ::ffff:192.168.2.105 flot host.iobroker 2021-04-16 13:43:47.278 info iobroker info sharp Using cached /home/iobroker/.npm/_libvips/libvips-8.10.0-linux-x64.tar.br host.iobroker 2021-04-16 13:40:09.986 info instance system.adapter.ical.2 terminated with code 0 (NO_ERROR) ical.2 2021-04-16 13:40:09.408 info (4261) Terminated (NO_ERROR): Without reason ical.2 2021-04-16 13:40:04.076 info (4261) processing URL: Geburtstag https://calendar.google.com/calendar/ical/lqbnk2mjfq76g1pq1mg0v962q4%40group.calendar.google.com/private-3381bd6686823f0e378489decbeb2378/basic.ics host.iobroker 2021-04-16 13:40:03.751 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.iobroker 2021-04-16 13:40:03.490 info iobroker NPM version: 6.14.12npm install iobroker.zigbee@1.5.1 --loglevel error --prefix "/opt/iobroker" (System call) ical.2 2021-04-16 13:40:03.097 info (4261) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.ical, node: v14.16.1, js-controller: 3.2.16 zigbee.0 2021-04-16 13:40:03.118 info (3977) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-04-16 13:40:03.117 info (3977) terminating zigbee.0 2021-04-16 13:40:02.783 info (3977) Zigbee: disabling joining new devices. zigbee.0 2021-04-16 13:40:02.781 info (3977) cleaned everything up... zigbee.0 2021-04-16 13:40:02.780 info (3977) Got terminate signal TERMINATE_YOURSELF host.iobroker 2021-04-16 13:40:02.820 info stopInstance system.adapter.zigbee.0 send kill signal host.iobroker 2021-04-16 13:40:02.763 info stopInstance system.adapter.zigbee.0 (force=false, process=true) host.iobroker 2021-04-16 13:40:02.762 info "system.adapter.zigbee.0" disabled host.iobroker 2021-04-16 13:40:02.709 info iobroker host.iobroker Adapter "system.adapter.zigbee.0" is stopped. host.iobroker 2021-04-16 13:40:02.637 info iobroker Update zigbee from @1.4.4 to @1.5.1 host.iobroker 2021-04-16 13:40:00.449 info instance system.adapter.ical.2 started with pid 4261 host.iobroker 2021-04-16 13:40:00.203 info iobroker upgrade zigbee@amg_666 sagte in Zigbee startet nach Update nicht mehr:
Please check permissions and user ownership of this file. Was ioBroker started as a different user?
Und?
Das kann vom root-login kommen. Damit kann man sich ganz wunderbar das System zerfriemeln. Deswegen nutzt man den halt auch nicht. -
@amg_666 sagte in Zigbee startet nach Update nicht mehr:
Please check permissions and user ownership of this file. Was ioBroker started as a different user?
Und?
Das kann vom root-login kommen. Damit kann man sich ganz wunderbar das System zerfriemeln. Deswegen nutzt man den halt auch nicht. -
@thomas-braun Also neu aufsetzen und dann ein Backup einspielen, oder?
@amg_666
Keine Ahnung. Musst du wissen, was du machen willst oder musst. -
@thomas-braun sagte in Zigbee startet nach Update nicht mehr:
Musst du wissen, was du machen willst oder musst.
Wenn ich das wüsste, dann würde ich die Frage ja nicht posten :-)
Aber mal im Ernst: Durch Root kann ich mir diverse Rechte "zerschießen" und ich dachte dass das doch genau ein Thema ist, was derr Fixer korrigiert (?)iobroker auf proxmox container
-
@thomas-braun sagte in Zigbee startet nach Update nicht mehr:
Musst du wissen, was du machen willst oder musst.
Wenn ich das wüsste, dann würde ich die Frage ja nicht posten :-)
Aber mal im Ernst: Durch Root kann ich mir diverse Rechte "zerschießen" und ich dachte dass das doch genau ein Thema ist, was derr Fixer korrigiert (?)Der Fixer ist aber auch nicht der Wunderheiler für verbogene Systeme. Das kann funktionieren, muss aber nicht. Kommt halt darauf an was da genau verfummelt wurde.
Besser halt erst gar nicht per unnötigem root-login das System kaputt machen.Wenn du nicht weißt wo da anzusetzen ist: Installier es neu.
-
@thomas-braun Ich setz es auf gelöst :-)
- Bei den fehlerhaften Installationen hat er ja maßgeblich js-controller Module angemeckert die angeblich nicht vorhanden sind. Ich habe jetzt mit
npm install iobroker.js-controllerden js-controller neu installiert und da kamen dann einige Unstimmigkeiten (unkompatible Funktionstypen, falsche lockfile Versionen etc)
Nach Installation ließ sich iobroker nicht starten , also nochmal fixer und jetzt läuft es und auch der zigbee ging ohne Probleme auf die neue Version.npm WARN read-shrinkwrap This version of npm is compatible with lockfileVersion@ 1, but package-lock.json was generated for lockfileVersion@2. I'll try to do my best with it! > iobroker.js-controller@3.2.16 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.12 > epoll@2.0.10 install /opt/iobroker/node_modules/epoll > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/epoll/build' CXX(target) Release/obj.target/epoll/src/epoll.o SOLINK_MODULE(target) Release/obj.target/epoll.node COPY Release/epoll.node make: Leaving directory '/opt/iobroker/node_modules/epoll/build' > bufferutil@4.0.3 install /opt/iobroker/node_modules/bufferutil > node-gyp-build > unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build' CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o In file included from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:758:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:792:3: note: in expansion of macro 'NODE_MODULE_X' NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro 'NODE_MODULE' NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/unix_dgram.node COPY Release/unix_dgram.node make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build' > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional > node rebuild.js ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. > utf-8-validate@5.0.4 install /opt/iobroker/node_modules/utf-8-validate > node-gyp-build > canvas@2.7.0 install /opt/iobroker/node_modules/canvas > node-pre-gyp install --fallback-to-build node-pre-gyp WARN Using request for node-pre-gyp https download [canvas] Success: "/opt/iobroker/node_modules/canvas/build/Release/canvas.node" is installed via remote > @serialport/bindings@9.0.7 install /opt/iobroker/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > sharp@0.26.2 install /opt/iobroker/node_modules/sharp > (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy) info sharp Using cached /home/iobroker/.npm/_libvips/libvips-8.10.0-linux-x64.tar.br > @serialport/bindings@9.0.4 install /opt/iobroker/node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > @serialport/bindings@9.0.4 install /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/diskusage/build' CXX(target) Release/obj.target/diskusage/src/main.o In file included from ../../nan/nan.h:56, from ../src/main.cpp:3: /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:758:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:792:3: note: in expansion of macro 'NODE_MODULE_X' NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro 'NODE_MODULE' NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.node make: Leaving directory '/opt/iobroker/node_modules/diskusage/build' > iobroker.vis@1.3.8 install /opt/iobroker/node_modules/iobroker.vis > node main.js --install > iobroker.js-controller@3.2.16 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first object _design/system updated The following notifications happened during sync: - Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory! ioBroker configuration updated > @root/acme@3.1.0 postinstall /opt/iobroker/node_modules/@root/acme > node scripts/postinstall > core-js@3.10.0 postinstall /opt/iobroker/node_modules/core-js > node -e "try{require('./postinstall')}catch(e){}" Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library! The project needs your help! Please consider supporting of core-js on Open Collective or Patreon: > https://opencollective.com/core-js > https://www.patreon.com/zloirock Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -) > serialport@9.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > serialport@9.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > iobroker.javascript@5.1.3 postinstall /opt/iobroker/node_modules/iobroker.javascript > node ./install/installTypings.js Installing NodeJS typings... latest @types: 14, installed node: 14 npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) + iobroker.js-controller@3.2.16 added 2480 packages from 458 contributors, removed 5 packages and updated 1628 packages in 296.338s 137 packages are looking for funding run `npm fund` for detailsiobroker auf proxmox container
-
@thomas-braun Ich setz es auf gelöst :-)
- Bei den fehlerhaften Installationen hat er ja maßgeblich js-controller Module angemeckert die angeblich nicht vorhanden sind. Ich habe jetzt mit
npm install iobroker.js-controllerden js-controller neu installiert und da kamen dann einige Unstimmigkeiten (unkompatible Funktionstypen, falsche lockfile Versionen etc)
Nach Installation ließ sich iobroker nicht starten , also nochmal fixer und jetzt läuft es und auch der zigbee ging ohne Probleme auf die neue Version.npm WARN read-shrinkwrap This version of npm is compatible with lockfileVersion@ 1, but package-lock.json was generated for lockfileVersion@2. I'll try to do my best with it! > iobroker.js-controller@3.2.16 preinstall /opt/iobroker/node_modules/iobroker.js-controller > node lib/preinstallCheck.js NPM version: 6.14.12 > epoll@2.0.10 install /opt/iobroker/node_modules/epoll > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/epoll/build' CXX(target) Release/obj.target/epoll/src/epoll.o SOLINK_MODULE(target) Release/obj.target/epoll.node COPY Release/epoll.node make: Leaving directory '/opt/iobroker/node_modules/epoll/build' > bufferutil@4.0.3 install /opt/iobroker/node_modules/bufferutil > node-gyp-build > unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build' CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o In file included from ../../nan/nan.h:56, from ../src/unix_dgram.cc:5: /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:758:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:792:3: note: in expansion of macro 'NODE_MODULE_X' NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro 'NODE_MODULE' NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/unix_dgram.node COPY Release/unix_dgram.node make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build' > ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional > node rebuild.js ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks. > utf-8-validate@5.0.4 install /opt/iobroker/node_modules/utf-8-validate > node-gyp-build > canvas@2.7.0 install /opt/iobroker/node_modules/canvas > node-pre-gyp install --fallback-to-build node-pre-gyp WARN Using request for node-pre-gyp https download [canvas] Success: "/opt/iobroker/node_modules/canvas/build/Release/canvas.node" is installed via remote > @serialport/bindings@9.0.7 install /opt/iobroker/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > sharp@0.26.2 install /opt/iobroker/node_modules/sharp > (node install/libvips && node install/dll-copy && prebuild-install) || (node-gyp rebuild && node install/dll-copy) info sharp Using cached /home/iobroker/.npm/_libvips/libvips-8.10.0-linux-x64.tar.br > @serialport/bindings@9.0.4 install /opt/iobroker/node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > @serialport/bindings@9.0.4 install /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild > diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage > node-gyp rebuild make: Entering directory '/opt/iobroker/node_modules/diskusage/build' CXX(target) Release/obj.target/diskusage/src/main.o In file included from ../../nan/nan.h:56, from ../src/main.cpp:3: /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:758:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.16.1/include/node/node.h:792:3: note: in expansion of macro 'NODE_MODULE_X' NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro 'NODE_MODULE' NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o SOLINK_MODULE(target) Release/obj.target/diskusage.node COPY Release/diskusage.node make: Leaving directory '/opt/iobroker/node_modules/diskusage/build' > iobroker.vis@1.3.8 install /opt/iobroker/node_modules/iobroker.vis > node main.js --install > iobroker.js-controller@3.2.16 install /opt/iobroker/node_modules/iobroker.js-controller > node iobroker.js setup first object _design/system updated The following notifications happened during sync: - Ignoring Directory "hm-rega" because officially not created as meta object. Please remove directory! ioBroker configuration updated > @root/acme@3.1.0 postinstall /opt/iobroker/node_modules/@root/acme > node scripts/postinstall > core-js@3.10.0 postinstall /opt/iobroker/node_modules/core-js > node -e "try{require('./postinstall')}catch(e){}" Thank you for using core-js ( https://github.com/zloirock/core-js ) for polyfilling JavaScript standard library! The project needs your help! Please consider supporting of core-js on Open Collective or Patreon: > https://opencollective.com/core-js > https://www.patreon.com/zloirock Also, the author of core-js ( https://github.com/zloirock ) is looking for a good job -) > serialport@9.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > serialport@9.0.6 postinstall /opt/iobroker/node_modules/zigbee-herdsman/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > iobroker.javascript@5.1.3 postinstall /opt/iobroker/node_modules/iobroker.javascript > node ./install/installTypings.js Installing NodeJS typings... latest @types: 14, installed node: 14 npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules/chokidar/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"}) + iobroker.js-controller@3.2.16 added 2480 packages from 458 contributors, removed 5 packages and updated 1628 packages in 296.338s 137 packages are looking for funding run `npm fund` for details@amg_666
Über npm installiert man das ja auch anders:cd /opt/iobroker sudo -H -u iobroker npm install iobroker.js-controller -
@thomas-braun im how-to steht unter Punkt 3 d) nur npm install..., da hatte ich das her.
Aber jetzt läufts ja, insofern ist es für mich ok.@amg_666 Mal geschaut von wann das HowTo ist?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden468
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge