Weihnachtsangebot 2025! 🎄

[hg6806]

@michi_pi
Irgendwie verstehe ich mit den ganzen Ports nur noch Bahnhof.

Ich hatte vorher MQTT Adapter und meine ESP, was ja wie Shelly ist, alles auf 1883, was immer funktioniert hat.
Ich dachte die müssen alle auf dem gleichen Port? Client und Broker?

Jetzt hast du aber Client (mosquitto) auf 1883 Broker aber auf 1884 und wmbusmeters sendet nach 1884?

Deine Shellys sind auf 1885 eingestellt. Und hast du jetzt für die Shellys eine 2. Instanz? Wenn ja auf welchem Port?

@michi_pi sagte in Wasserzähler (Funk 868) auslesen.:

Ich habe nur den MQTT Broker in Iobroker und einen für Shelly´s

Hast du jetzt einen oder zwei Instanzen von MQTT?

[Michi_Pi]

@hg6806 für die Shelly´s verwende ich den Shelly-Adapter

für wmbusmeter den MQTT-Adapter

Im Prinzip eigentlich zwei Instanzen, wobei ich denke dass ich auch den shelly-Adapter direkt durch den mqtt ablösen kann. Das hat sich bei mir nur historisch so ergeben.

Ich denke nicht dass ein Client und der Broker auf dem gleichen Port laufen muss/soll.
Habe für jeden einen eigenen Port auch für mosquitto.

[hg6806]

@michi_pi
Ich habe mal bzgl. MQTT etwas rumgesucht und habe das hier gefunden und natürlich gleich nachgefragt :-)

[Michi_Pi]

@hg6806 okay, ja ist gut erklärt.

Das mit Username und Passwort hatte ich ja hier schon erwähnt. Das hat ja wohl bei dir nicht funktioniert?

[hg6806]

@michi_pi
Nein, bis jetzt habe ich noch nie Daten in iobroker gesehen.
War aber auch published. Vielleicht war das der Fehler. Ich dachte das passiert automatisch, wenn der Broker Daten erhält.

Auf jeden Fall warte ich jetzt wieder auf Daten, die bei mir sehr selten kommen..
Nur alle 3-5h.

Kann man den rssi Wert auch ermitteln und übertragen? Anfangs hatte man den ja gesehen.

Nicht dass da noch ein HF Problem besteht.

[Michi_Pi]

@hg6806 weiß ich nicht ob man den rssi wert auch bekommt. Gib Mal ```
wmbusmeters --listenvs=iperl

Ist das so, dass bei dir nur alle 3-5h was ankommt. Bei mir kommt alle 10s.was an.

[hg6806]

@michi_pi

Also, durch den anderen MQTT Thread bin ich jetzt etwas weiter gekommen.
MQTT läuft wohl, aber es kommt trotzdem noch kein Wert, bzw Werte an, da diese leer sind.

Ich habe mal händisch einen Wert in die ioBroker Datenpunkte geschrieben, dieser wurde dann durch MQTT überschrieben, bzw. gelöscht.

bei echo $METER_TOTAL_M3
gibt es nichts zurück.

hier bekomme ich jedoch was:

pi@raspberrypi:~ $ wmbusmeters auto:t1 meinwasserzaehler iperl:t1 21200936 2E13xxxxxxxxxxxxxxx92
Started auto cul on /dev/ttyACM1 listening on t1
meinwasserzaehler       21200936        32.488 m3       0 m3/h  2021-03-31 10:42.40

und das scheint auch in Ordnung zu sein:

pi@raspberrypi:~ $ wmbusmeters --listenvs=iperl
METER_JSON
METER_ID
METER_NAME
METER_MEDIA
METER_TYPE
METER_TIMESTAMP
METER_DEVICE
METER_RSSI_DBM
METER_TOTAL_M3
METER_MAX_FLOW_M3H
pi@raspberrypi:~ $ set | grep METER

...bis auf den letzten Befehl.

Und die beiden Zeile sind in der Config:

shell=/usr/bin/mosquitto_pub -h 192.168.178.18 -p 1883 -u MeinUsername -P meinPasswort -t wmbusmeters/21200936/Gesamt -m "$METER_TOTAL_M3"
shell=/usr/bin/mosquitto_pub -h 192.168.178.18 -p 1883 -u MeinUsername -P meinPasswort -t wmbusmeters/21200936/RSSI -m "$METER_RSSI_DBM"
 
 

Beide sind auch gepublisht.

[Michi_Pi]

@hg6806 okay, komisch. Der daemon läuft aber?

Kannst du bitte mal zeigen was hier ausgegeben wird?

systemctl status wmbusmeters.service

[hg6806]

@michi_pi sagte in Wasserzähler (Funk 868) auslesen.:

systemctl status wmbusmeters.service

Läuft wohl nicht:

pi@raspberrypi:~ $ systemctl status wmbusmeters.service
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor pres
   Active: failed (Result: exit-code) since Wed 2021-03-31 23:06:33 CEST; 8h ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 672 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (c
  Process: 673 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbus
  Process: 674 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=
  Process: 675 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmete
  Process: 676 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid
 Main PID: 678 (code=exited, status=1/FAILURE)

Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart j
Mär 31 23:06:33 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Start request repea
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Failed with result
Mär 31 23:06:33 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
lines 1-18/18 (END)...skipping...
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Wed 2021-03-31 23:06:33 CEST; 8h ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 672 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 673 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 674 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 675 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 676 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 678 (code=exited, status=1/FAILURE)

Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
Mär 31 23:06:33 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
Mär 31 23:06:33 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
~

Obwohl ich über

pi@raspberrypi:~ $ wmbusmeters auto:t1 meinwasserzaehler iperl:t1 21200936 2E13xxxxxxxxxxxxxxx92

alle 1-2h was reinbekommen hatte.

Ich wollte das Ganze nochmal deinstallieren und neu installieren finde aber über

dpkg --list

...das Paket nicht mal

Hier nochmal Versuche den Service neu zu starten:

pi@raspberrypi:~ $ sudo systemctl stop wmbusmeters
pi@raspberrypi:~ $ systemctl status wmbusmeters.service
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Wed 2021-03-31 23:06:33 CEST; 8h ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 672 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 673 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 674 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 675 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 676 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 678 (code=exited, status=1/FAILURE)

Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
Mär 31 23:06:33 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Mär 31 23:06:33 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
Mär 31 23:06:33 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
pi@raspberrypi:~ $ sudo systemctl start wmbusmeters
pi@raspberrypi:~ $ systemctl status wmbusmeters.service
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor preset: enabled)
   Active: activating (auto-restart) (Result: exit-code) since Thu 2021-04-01 07:49:15 CEST; 1s ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 19954 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 19955 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 19956 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 19957 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 19958 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 19959 (code=exited, status=1/FAILURE)

Apr 01 07:49:16 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Apr 01 07:49:16 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
Apr 01 07:49:16 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Apr 01 07:49:16 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Apr 01 07:49:16 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
Apr 01 07:49:16 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
pi@raspberrypi:~ $

Den Fehler hatte ich ja von Anfang an gepostet.

[Michi_Pi]

@hg6806

was kommt unter

ps -e | grep wmbusmeters

[hg6806]

@michi_pi sagte in Wasserzähler (Funk 868) auslesen.:

ps -e | grep wmbusmeters

Garnichts.

ps -e | grep wmbusmeters
pi@raspberrypi:~ $

[Michi_Pi]

@hg6806 okay, ja vielleicht sollte es doch nochmal neuinstalliert werden. Oder erst mal ein Update durchführen.

$ git pull https://github.com/weetmuts/wmbusmeters.git
$ cd wmbusmeters
$ sudo make clean
$ sudo make
$ sudo systemctl daemon-reload

und danach nochmal schauen ob es dann läuft

[hg6806]

@michi_pi sagte in Wasserzähler (Funk 868) auslesen.:

sudo systemctl daemon-reload

Habe es ausgeführt, Fehler taucht wieder auf.

pi@raspberrypi:~/wmbusmeters $ systemctl status wmbusmeters.service
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Thu 2021-04-01 11:17:02 CEST; 1min 38s ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 16257 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 16258 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 16259 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 16260 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 16261 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 16262 (code=exited, status=1/FAILURE)

Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
Apr 01 11:17:02 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
Apr 01 11:17:02 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
pi@raspberrypi:~/wmbusmeters $ journalctl -xe
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- An ExecStart= process belonging to unit wmbusmeters.service has exited.
--
-- The process' exit code is 'exited' and its exit status is 1.
Apr 01 11:17:01 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- The unit wmbusmeters.service has entered the 'failed' state with result 'exit-code'.
Apr 01 11:17:01 raspberrypi CRON[16265]: pam_unix(cron:session): session opened for user root by (uid=0)
Apr 01 11:17:01 raspberrypi CRON[16266]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Apr 01 11:17:01 raspberrypi CRON[16265]: pam_unix(cron:session): session closed for user root
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
-- Subject: Automatic restarting of a unit has been scheduled
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Automatic restarting of the unit wmbusmeters.service has been scheduled, as the result for
-- the configured Restart= setting for the unit.
Apr 01 11:17:02 raspberrypi systemd[1]: Stopped "wmbusmeters service".
-- Subject: A stop job for unit wmbusmeters.service has finished
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A stop job for unit wmbusmeters.service has finished.
--
-- The job identifier is 2170 and the job result is done.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- The unit wmbusmeters.service has entered the 'failed' state with result 'exit-code'.
Apr 01 11:17:02 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
-- Subject: A start job for unit wmbusmeters.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- A start job for unit wmbusmeters.service has finished with a failure.
--

Hat es vielleicht was mit fehlenden Rechten zu tun?

Wie kann ich denn das Ganze erst einmal ganz deinstallieren?
Habe da nichts gefunden und

pi@raspberrypi:~/wmbusmeters $ sudo apt-get --purge remove wmbusmeters
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket wmbusmeters kann nicht gefunden werden.

...funktioniert nicht.

[Michi_Pi]

@hg6806 einfach mit uninstall

sudo systemctl stop wmbusmeters
cd wmbusmeters
sudo make uninstall

Wenn du dann diese Zeilen ausführst, kannst du dann mal zeigen was in dem make test für ein Ergebnis gekommen ist?

git clone https://github.com/weetmuts/wmbusmeters.git
cd wmbusmeters
make && make test

[hg6806]

@michi_pi sagte in Wasserzähler (Funk 868) auslesen.:

make && make test

pi@raspberrypi:~/wmbusmeters $ sudo apt-get --purge remove wmbusmeters
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket wmbusmeters kann nicht gefunden werden.
pi@raspberrypi:~/wmbusmeters $ wmbusmeters auto:t1 meinwasserzaehler iperl:t1 21200936 2E13CF51607F0A307C3C91025CE97792
Started auto cul on /dev/ttyACM1 listening on t1
meinwasserzaehler       21200936        32.754 m3       0 m3/h  2021-04-01 11:36.04
^Cpi@raspberrypi:~/wmbusmeters $ sudo systemctl stop wmbusmeters
pi@raspberrypi:~/wmbusmeters $ cd wmbusmeters
-bash: cd: wmbusmeters: Datei oder Verzeichnis nicht gefunden
pi@raspberrypi:~/wmbusmeters $ sudo make uninstall
Building 1.1.0-44-ga26bac3
binaries: removed /usr/bin/wmbusmeters and /usr/sbin/wmbusmetersd
man page: removed /usr/share/man/man1/wmbusmeters.1.gz
user: removed wmbusmeters
log dir: removed /var/log/wmbusmeters/
logrotate file: removed /etc/logrotate.d/wmbusmeters
conf file: removed /etc/wmbusmeters.conf
conf dir: removed /etc/wmbusmeters.d
systemd: removed /lib/systemd/system/wmbusmeters.service
pi@raspberrypi:~/wmbusmeters $ git clone https://github.com/weetmuts/wmbusmeters.git
Klone nach 'wmbusmeters' ...
remote: Enumerating objects: 195, done.
remote: Counting objects: 100% (195/195), done.
remote: Compressing objects: 100% (147/147), done.
remote: Total 6512 (delta 115), reused 87 (delta 45), pack-reused 6317
Empfange Objekte: 100% (6512/6512), 2.67 MiB | 6.85 MiB/s, Fertig.
Löse Unterschiede auf: 100% (5065/5065), Fertig.
pi@raspberrypi:~/wmbusmeters $ cd wmbusmeters
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ make && make test
Building 1.2.0-21-ga26bac3
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/aes.cc -c -E > build/aes.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/aes.cc -MMD -c -o build/aes.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/aescmac.cc -c -E > build/aescmac.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/aescmac.cc -MMD -c -o build/aescmac.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/bus.cc -c -E > build/bus.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/bus.cc -MMD -c -o build/bus.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/cmdline.cc -c -E > build/cmdline.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/cmdline.cc -MMD -c -o build/cmdline.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/config.cc -c -E > build/config.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/config.cc -MMD -c -o build/config.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/dvparser.cc -c -E > build/dvparser.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/dvparser.cc -MMD -c -o build/dvparser.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/mbus_rawtty.cc -c -E > build/mbus_rawtty.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/mbus_rawtty.cc -MMD -c -o build/mbus_rawtty.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meters.cc -c -E > build/meters.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meters.cc -MMD -c -o build/meters.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/manufacturer_specificities.cc -c -E > build/manufacturer_specificities.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/manufacturer_specificities.cc -MMD -c -o build/manufacturer_specificities.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/printer.cc -c -E > build/printer.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/printer.cc -MMD -c -o build/printer.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/rtlsdr.cc -c -E > build/rtlsdr.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/rtlsdr.cc -MMD -c -o build/rtlsdr.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/serial.cc -c -E > build/serial.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/serial.cc -MMD -c -o build/serial.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/shell.cc -c -E > build/shell.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/shell.cc -MMD -c -o build/shell.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/sha256.cc -c -E > build/sha256.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/sha256.cc -MMD -c -o build/sha256.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/threads.cc -c -E > build/threads.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/threads.cc -MMD -c -o build/threads.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/util.cc -c -E > build/util.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/util.cc -MMD -c -o build/util.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/units.cc -c -E > build/units.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/units.cc -MMD -c -o build/units.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus.cc -c -E > build/wmbus.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus.cc -MMD -c -o build/wmbus.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_auto.cc -c -E > build/meter_auto.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_auto.cc -MMD -c -o build/meter_auto.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_unknown.cc -c -E > build/meter_unknown.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_unknown.cc -MMD -c -o build/meter_unknown.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_amiplus.cc -c -E > build/meter_amiplus.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_amiplus.cc -MMD -c -o build/meter_amiplus.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_amb8465.cc -c -E > build/wmbus_amb8465.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_amb8465.cc -MMD -c -o build/wmbus_amb8465.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_im871a.cc -c -E > build/wmbus_im871a.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_im871a.cc -MMD -c -o build/wmbus_im871a.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_cul.cc -c -E > build/wmbus_cul.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_cul.cc -MMD -c -o build/wmbus_cul.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rtlwmbus.cc -c -E > build/wmbus_rtlwmbus.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rtlwmbus.cc -MMD -c -o build/wmbus_rtlwmbus.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rtl433.cc -c -E > build/wmbus_rtl433.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rtl433.cc -MMD -c -o build/wmbus_rtl433.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_simulator.cc -c -E > build/wmbus_simulator.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_simulator.cc -MMD -c -o build/wmbus_simulator.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rawtty.cc -c -E > build/wmbus_rawtty.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rawtty.cc -MMD -c -o build/wmbus_rawtty.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rc1180.cc -c -E > build/wmbus_rc1180.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_rc1180.cc -MMD -c -o build/wmbus_rc1180.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_utils.cc -c -E > build/wmbus_utils.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/wmbus_utils.cc -MMD -c -o build/wmbus_utils.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_apator08.cc -c -E > build/meter_apator08.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_apator08.cc -MMD -c -o build/meter_apator08.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_apator162.cc -c -E > build/meter_apator162.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_apator162.cc -MMD -c -o build/meter_apator162.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_cma12w.cc -c -E > build/meter_cma12w.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_cma12w.cc -MMD -c -o build/meter_cma12w.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_compact5.cc -c -E > build/meter_compact5.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_compact5.cc -MMD -c -o build/meter_compact5.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ebzwmbe.cc -c -E > build/meter_ebzwmbe.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ebzwmbe.cc -MMD -c -o build/meter_ebzwmbe.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ehzp.cc -c -E > build/meter_ehzp.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ehzp.cc -MMD -c -o build/meter_ehzp.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_esyswm.cc -c -E > build/meter_esyswm.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_esyswm.cc -MMD -c -o build/meter_esyswm.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_elf.cc -c -E > build/meter_elf.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_elf.cc -MMD -c -o build/meter_elf.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_em24.cc -c -E > build/meter_em24.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_em24.cc -MMD -c -o build/meter_em24.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_emerlin868.cc -c -E > build/meter_emerlin868.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_emerlin868.cc -MMD -c -o build/meter_emerlin868.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ev200.cc -c -E > build/meter_ev200.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ev200.cc -MMD -c -o build/meter_ev200.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_evo868.cc -c -E > build/meter_evo868.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_evo868.cc -MMD -c -o build/meter_evo868.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_eurisii.cc -c -E > build/meter_eurisii.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_eurisii.cc -MMD -c -o build/meter_eurisii.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_fhkvdataiii.cc -c -E > build/meter_fhkvdataiii.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_fhkvdataiii.cc -MMD -c -o build/meter_fhkvdataiii.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_fhkvdataiv.cc -c -E > build/meter_fhkvdataiv.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_fhkvdataiv.cc -MMD -c -o build/meter_fhkvdataiv.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_flowiq2200.cc -c -E > build/meter_flowiq2200.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_flowiq2200.cc -MMD -c -o build/meter_flowiq2200.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrus.cc -c -E > build/meter_hydrus.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrus.cc -MMD -c -o build/meter_hydrus.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrocalm3.cc -c -E > build/meter_hydrocalm3.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrocalm3.cc -MMD -c -o build/meter_hydrocalm3.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrodigit.cc -c -E > build/meter_hydrodigit.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_hydrodigit.cc -MMD -c -o build/meter_hydrodigit.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ei6500.cc -c -E > build/meter_ei6500.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ei6500.cc -MMD -c -o build/meter_ei6500.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_iperl.cc -c -E > build/meter_iperl.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_iperl.cc -MMD -c -o build/meter_iperl.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_izar.cc -c -E > build/meter_izar.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_izar.cc -MMD -c -o build/meter_izar.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_izar3.cc -c -E > build/meter_izar3.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_izar3.cc -MMD -c -o build/meter_izar3.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansendw.cc -c -E > build/meter_lansendw.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansendw.cc -MMD -c -o build/meter_lansendw.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansensm.cc -c -E > build/meter_lansensm.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansensm.cc -MMD -c -o build/meter_lansensm.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansenth.cc -c -E > build/meter_lansenth.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansenth.cc -MMD -c -o build/meter_lansenth.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansenpu.cc -c -E > build/meter_lansenpu.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lansenpu.cc -MMD -c -o build/meter_lansenpu.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_mkradio3.cc -c -E > build/meter_mkradio3.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_mkradio3.cc -MMD -c -o build/meter_mkradio3.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_mkradio4.cc -c -E > build/meter_mkradio4.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_mkradio4.cc -MMD -c -o build/meter_mkradio4.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical21.cc -c -E > build/meter_multical21.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical21.cc -MMD -c -o build/meter_multical21.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical302.cc -c -E > build/meter_multical302.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical302.cc -MMD -c -o build/meter_multical302.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical403.cc -c -E > build/meter_multical403.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical403.cc -MMD -c -o build/meter_multical403.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical603.cc -c -E > build/meter_multical603.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical603.cc -MMD -c -o build/meter_multical603.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical803.cc -c -E > build/meter_multical803.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_multical803.cc -MMD -c -o build/meter_multical803.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_omnipower.cc -c -E > build/meter_omnipower.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_omnipower.cc -MMD -c -o build/meter_omnipower.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_piigth.cc -c -E > build/meter_piigth.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_piigth.cc -MMD -c -o build/meter_piigth.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_q400.cc -c -E > build/meter_q400.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_q400.cc -MMD -c -o build/meter_q400.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_qcaloric.cc -c -E > build/meter_qcaloric.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_qcaloric.cc -MMD -c -o build/meter_qcaloric.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_rfmamb.cc -c -E > build/meter_rfmamb.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_rfmamb.cc -MMD -c -o build/meter_rfmamb.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_rfmtx1.cc -c -E > build/meter_rfmtx1.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_rfmtx1.cc -MMD -c -o build/meter_rfmtx1.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sharky.cc -c -E > build/meter_sharky.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sharky.cc -MMD -c -o build/meter_sharky.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_supercom587.cc -c -E > build/meter_supercom587.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_supercom587.cc -MMD -c -o build/meter_supercom587.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sontex868.cc -c -E > build/meter_sontex868.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sontex868.cc -MMD -c -o build/meter_sontex868.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_topaseskr.cc -c -E > build/meter_topaseskr.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_topaseskr.cc -MMD -c -o build/meter_topaseskr.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_tsd2.cc -c -E > build/meter_tsd2.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_tsd2.cc -MMD -c -o build/meter_tsd2.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ultrimis.cc -c -E > build/meter_ultrimis.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_ultrimis.cc -MMD -c -o build/meter_ultrimis.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_vario451.cc -c -E > build/meter_vario451.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_vario451.cc -MMD -c -o build/meter_vario451.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_waterstarm.cc -c -E > build/meter_waterstarm.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_waterstarm.cc -MMD -c -o build/meter_waterstarm.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_whe46x.cc -c -E > build/meter_whe46x.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_whe46x.cc -MMD -c -o build/meter_whe46x.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_whe5x.cc -c -E > build/meter_whe5x.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_whe5x.cc -MMD -c -o build/meter_whe5x.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sensostar.cc -c -E > build/meter_sensostar.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_sensostar.cc -MMD -c -o build/meter_sensostar.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_gransystems_ccx01.cc -c -E > build/meter_gransystems_ccx01.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_gransystems_ccx01.cc -MMD -c -o build/meter_gransystems_ccx01.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lse_08.cc -c -E > build/meter_lse_08.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_lse_08.cc -MMD -c -o build/meter_lse_08.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_weh_07.cc -c -E > build/meter_weh_07.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/meter_weh_07.cc -MMD -c -o build/meter_weh_07.o
echo 'R"MANUAL(' > build/short_manual.h
sed -n '/wmbusmeters version/,/```/p' README.md \
| grep -v 'wmbusmeters version' \
| grep -v '```' >> build/short_manual.h
echo ')MANUAL";' >> build/short_manual.h
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/main.cc -c -E > build/main.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/main.cc -MMD -c -o build/main.o
g++ -o build/wmbusmeters build/aes.o build/aescmac.o build/bus.o build/cmdline.o build/config.o build/dvparser.o build/mbus_rawtty.o build/meters.o build/manufacturer_specificities.o build/printer.o build/rtlsdr.o build/serial.o build/shell.o build/sha256.o build/threads.o build/util.o build/units.o build/wmbus.o build/meter_auto.o build/meter_unknown.o build/meter_amiplus.o build/wmbus_amb8465.o build/wmbus_im871a.o build/wmbus_cul.o build/wmbus_rtlwmbus.o build/wmbus_rtl433.o build/wmbus_simulator.o build/wmbus_rawtty.o build/wmbus_rc1180.o build/wmbus_utils.o build/meter_apator08.o build/meter_apator162.o build/meter_cma12w.o build/meter_compact5.o build/meter_ebzwmbe.o build/meter_ehzp.o build/meter_esyswm.o build/meter_elf.o build/meter_em24.o build/meter_emerlin868.o build/meter_ev200.o build/meter_evo868.o build/meter_eurisii.o build/meter_fhkvdataiii.o build/meter_fhkvdataiv.o build/meter_flowiq2200.o build/meter_hydrus.o build/meter_hydrocalm3.o build/meter_hydrodigit.o build/meter_ei6500.o build/meter_iperl.o build/meter_izar.o build/meter_izar3.o build/meter_lansendw.o build/meter_lansensm.o build/meter_lansenth.o build/meter_lansenpu.o build/meter_mkradio3.o build/meter_mkradio4.o build/meter_multical21.o build/meter_multical302.o build/meter_multical403.o build/meter_multical603.o build/meter_multical803.o build/meter_omnipower.o build/meter_piigth.o build/meter_q400.o build/meter_qcaloric.o build/meter_rfmamb.o build/meter_rfmtx1.o build/meter_sharky.o build/meter_supercom587.o build/meter_sontex868.o build/meter_topaseskr.o build/meter_tsd2.o build/meter_ultrimis.o build/meter_vario451.o build/meter_waterstarm.o build/meter_whe46x.o build/meter_whe5x.o build/meter_sensostar.o build/meter_gransystems_ccx01.o build/meter_lse_08.o build/meter_weh_07.o  build/main.o  -lrtlsdr -lusb-1.0 -lpthread
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/admin.cc -c -E > build/admin.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/admin.cc -MMD -c -o build/admin.o
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/ui.cc -c -E > build/ui.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/ui.cc -MMD -c -o build/ui.o
g++ -o build/wmbusmeters-admin build/aes.o build/aescmac.o build/bus.o build/cmdline.o build/config.o build/dvparser.o build/mbus_rawtty.o build/meters.o build/manufacturer_specificities.o build/printer.o build/rtlsdr.o build/serial.o build/shell.o build/sha256.o build/threads.o build/util.o build/units.o build/wmbus.o build/meter_auto.o build/meter_unknown.o build/meter_amiplus.o build/wmbus_amb8465.o build/wmbus_im871a.o build/wmbus_cul.o build/wmbus_rtlwmbus.o build/wmbus_rtl433.o build/wmbus_simulator.o build/wmbus_rawtty.o build/wmbus_rc1180.o build/wmbus_utils.o build/meter_apator08.o build/meter_apator162.o build/meter_cma12w.o build/meter_compact5.o build/meter_ebzwmbe.o build/meter_ehzp.o build/meter_esyswm.o build/meter_elf.o build/meter_em24.o build/meter_emerlin868.o build/meter_ev200.o build/meter_evo868.o build/meter_eurisii.o build/meter_fhkvdataiii.o build/meter_fhkvdataiv.o build/meter_flowiq2200.o build/meter_hydrus.o build/meter_hydrocalm3.o build/meter_hydrodigit.o build/meter_ei6500.o build/meter_iperl.o build/meter_izar.o build/meter_izar3.o build/meter_lansendw.o build/meter_lansensm.o build/meter_lansenth.o build/meter_lansenpu.o build/meter_mkradio3.o build/meter_mkradio4.o build/meter_multical21.o build/meter_multical302.o build/meter_multical403.o build/meter_multical603.o build/meter_multical803.o build/meter_omnipower.o build/meter_piigth.o build/meter_q400.o build/meter_qcaloric.o build/meter_rfmamb.o build/meter_rfmtx1.o build/meter_sharky.o build/meter_supercom587.o build/meter_sontex868.o build/meter_topaseskr.o build/meter_tsd2.o build/meter_ultrimis.o build/meter_vario451.o build/meter_waterstarm.o build/meter_whe46x.o build/meter_whe5x.o build/meter_sensostar.o build/meter_gransystems_ccx01.o build/meter_lse_08.o build/meter_weh_07.o  build/admin.o build/ui.o  -lmenu -lform -lncurses -lrtlsdr -lusb-1.0 -lpthread
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/testinternals.cc -c -E > build/testinternals.o.src
g++ -Os -fPIC -std=c++11 -Wall -Werror=format-security -Ibuild src/testinternals.cc -MMD -c -o build/testinternals.o
g++ -o build/testinternals build/aes.o build/aescmac.o build/bus.o build/cmdline.o build/config.o build/dvparser.o build/mbus_rawtty.o build/meters.o build/manufacturer_specificities.o build/printer.o build/rtlsdr.o build/serial.o build/shell.o build/sha256.o build/threads.o build/util.o build/units.o build/wmbus.o build/meter_auto.o build/meter_unknown.o build/meter_amiplus.o build/wmbus_amb8465.o build/wmbus_im871a.o build/wmbus_cul.o build/wmbus_rtlwmbus.o build/wmbus_rtl433.o build/wmbus_simulator.o build/wmbus_rawtty.o build/wmbus_rc1180.o build/wmbus_utils.o build/meter_apator08.o build/meter_apator162.o build/meter_cma12w.o build/meter_compact5.o build/meter_ebzwmbe.o build/meter_ehzp.o build/meter_esyswm.o build/meter_elf.o build/meter_em24.o build/meter_emerlin868.o build/meter_ev200.o build/meter_evo868.o build/meter_eurisii.o build/meter_fhkvdataiii.o build/meter_fhkvdataiv.o build/meter_flowiq2200.o build/meter_hydrus.o build/meter_hydrocalm3.o build/meter_hydrodigit.o build/meter_ei6500.o build/meter_iperl.o build/meter_izar.o build/meter_izar3.o build/meter_lansendw.o build/meter_lansensm.o build/meter_lansenth.o build/meter_lansenpu.o build/meter_mkradio3.o build/meter_mkradio4.o build/meter_multical21.o build/meter_multical302.o build/meter_multical403.o build/meter_multical603.o build/meter_multical803.o build/meter_omnipower.o build/meter_piigth.o build/meter_q400.o build/meter_qcaloric.o build/meter_rfmamb.o build/meter_rfmtx1.o build/meter_sharky.o build/meter_supercom587.o build/meter_sontex868.o build/meter_topaseskr.o build/meter_tsd2.o build/meter_ultrimis.o build/meter_vario451.o build/meter_waterstarm.o build/meter_whe46x.o build/meter_whe5x.o build/meter_sensostar.o build/meter_gransystems_ccx01.o build/meter_lse_08.o build/meter_weh_07.o  build/testinternals.o  -lrtlsdr -lusb-1.0 -lpthread
Building 1.2.0-21-ga26bac3
OK: test internals
OK: Test C1 meters
OK json: Test T1 meters
OK fields: Test T1 meters
OK json: Test S1 meters
OK fields: Test S1 meters
OK: Test meter with unknown driver
OK json: Test naughty non-compliant apator162 meters
OK fields: Test naughty non-compliant apator162 meters
OK json: Test Izars meters
OK: Test listen to all izars
OK: Test aes encrypted telegrams
OK: Test that failed decryption warning only prints once.
OK: Test shell invocation
OK: Test shell in config file
OK: Test that normal meterfiles are written
OK: Test that meterfiles with name-id are written
OK: Test that meterfiles with id are written
OK: Test that meterfiles with timestamps are written
OK: Test that meterfiles with timestamps are written
OK: Test normal config files with C1 meters
OK: Test logfile
OK: Test single meter conf file matches any id
OK: Test listen and print any meter heard in logfile
OK: Test listen and print any meter heard on stdout
OK: Test detection of drivers for all telegrams
OK: Test listen to wildcard * id
OK: Test listen to wildcard suffix 8856* id
OK: Test listen to two comma separted ids
OK: Test listen to three comma separted ids
OK: Test listen with negated ids
OK: Test listen with wrong driver and wildcard
OK: Test conversions of units
OK: Test selected fields
OK: Test oneshot
OK: Test wrong keys
OK: Test config4 with added conversions
OK: Test that listen to t1+c1 works with meters transmitting using t1+c1
OK: Test that listen to t1+c1 works with meters transmitting using t1+c1
OK: Test that setting supercom587 to c1 fails
OK: Test additional json from cmdline
OK: Test additional shell envs from cmdline
OK: Test additional json from wmbusmeters.conf and from meter file
OK: Test rtlwmbus starting background script to produce telegrams
OK: Reading binary telegram from stdin
OK: Reading binary telegram from file
OK: Reading rtlwmbus formatted telegrams from stdin
OK: Reading rtlwmbus formatted telegrams from file
OK: Reading rtl433 formatted telegrams from stdin
OK: Reading rtl433 formatted telegrams from file
OK: Test ok serial rawtty telegram on stdin
OK: Test bad serial rawtty telegram with interspersed noise, on stdin
OK: Test duplicates are ignored
OK: Test duplicates are left alone
OK: Test match on dll id
OK: Test match on tpl id
OK: Test log timestamps
Slower tests...
OK: reading all stdin before closing down
RUNNING Test alarms ...
STDERR---------------------------------
[ALARM DeviceInactivity] 4 seconds of inactivity resetting simulations/simulation_alarm.txt simulation (timeout 4s expected mon-sun(00-23) now 2021-04-01 12:35)
(wmbus) successfully reset wmbus device
STDOUT---------------------------------
TMP/OUTPUT-----------------------------
METER =={"media":"cold water","meter":"multical21","name":"Water","id":"76348799","total_m3":6.408,"target_m3":6.408,"max_flow_m3h":0,"flow_temperature_c":127,"external_temperature_c":19,"current_status":"DRY","time_dry":"22-31 days","time_reversed":"","time_leaking":"","time_bursting":"","timestamp":"2021-04-01T10:35:32Z"}==
METER =={"media":"cold water","meter":"multical21","name":"Water","id":"76348799","total_m3":6.408,"target_m3":6.408,"max_flow_m3h":0,"flow_temperature_c":127,"external_temperature_c":19,"current_status":"DRY","time_dry":"22-31 days","time_reversed":"","time_leaking":"","time_bursting":"","timestamp":"2021-04-01T10:35:38Z"}==
TMP/ALARM------------------------------
ALARM_SHELL DeviceInactivity [ALARM DeviceInactivity] 4 seconds of inactivity resetting simulations/simulation_alarm.txt simulation (timeout 4s expected mon-sun(00-23) now 2021-04-01 12:35)
---------------------------------------
OK: Test alarms
All tests ok!
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl stop wmbusmeters
Warning: The unit file, source configuration file or drop-ins of wmbusmeters.service changed on disk. Run 'systemctl daemon-reload' to reload units.
pi@raspberrypi:~/wmbusmeters/wmbusmeters $

und weiter:

pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl stop wmbusmeters
Warning: The unit file, source configuration file or drop-ins of wmbusmeters.service changed on disk. Run 'systemctl daemon-reload' to reload units.
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl daemon-reload
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl stop wmbusmeters
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl start wmbumeters
Failed to start wmbumeters.service: Unit wmbumeters.service not found.
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ sudo systemctl start wmbusmeters
Failed to start wmbusmeters.service: Unit wmbusmeters.service not found.
pi@raspberrypi:~/wmbusmeters/wmbusmeters $ cd
pi@raspberrypi:~ $ sudo systemctl start wmbusmeters
Failed to start wmbusmeters.service: Unit wmbusmeters.service not found.
pi@raspberrypi:~ $ systemctl status wmbusmeters.service
● wmbusmeters.service
   Loaded: not-found (Reason: Unit wmbusmeters.service not found.)
   Active: failed (Result: exit-code) since Thu 2021-04-01 11:17:02 CEST; 1h 24min ago
 Main PID: 16262 (code=exited, status=1/FAILURE)

Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Service RestartSec=1s expired, scheduling restart.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Scheduled restart job, restart counter is at 3.
Apr 01 11:17:02 raspberrypi systemd[1]: Stopped "wmbusmeters service".
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Start request repeated too quickly.
Apr 01 11:17:02 raspberrypi systemd[1]: wmbusmeters.service: Failed with result 'exit-code'.
Apr 01 11:17:02 raspberrypi systemd[1]: Failed to start "wmbusmeters service".
pi@raspberrypi:~ $

[Michi_Pi]

@hg6806 mit make test wollte ich nur sehen ob auch das kompilieren funktioniert. Also es wurde nicht wirklich installiert. Die tests waren ok.

also kannst jetzt

cd wmbusmeters
sudo make install
sudo systemctl daemon-reload
sudo systemctl start wmbusmeters

durchführen, dann nochmal schauen was der status bringt

[hg6806]

@michi_pi

Sieht vielversprechend aus.

pi@raspberrypi:~ $ cd wmbusmeters
pi@raspberrypi:~/wmbusmeters $ sudo make install
Building 1.1.0-44-ga26bac3
binaries: installed /usr/bin/wmbusmeters and /usr/sbin/wmbusmetersd
man page: installed /usr/share/man/man1/wmbusmeters.1.gz
group: added wmbusmeters
user: added wmbusmeters
user: added wmbusmeters to dialout group
user: added wmbusmeters to uucp group
user: added wmbusmeters to plugdev group
log: created /var/log/wmbusmeters/meter_readings
logrotate: created /etc/logrotate.d/wmbusmeters
conf file: created /etc/wmbusmeters.conf
conf dir: created /etc/wmbusmeters.d
systemd: no changes to /lib/systemd/system/wmbusmeters.service
pi@raspberrypi:~/wmbusmeters $ sudo systemctl daemon-reload
pi@raspberrypi:~/wmbusmeters $ sudo systemctl start wmbusmeters
pi@raspberrypi:~/wmbusmeters $ systemctl status wmbusmeters.service
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; enabled; vendor preset: enabled)
   Active: active (running) since Thu 2021-04-01 13:55:23 CEST; 51s ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 13729 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 13730 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 13731 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 13732 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 13733 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 13734 (wmbusmetersd)
    Tasks: 3 (limit: 4915)
   CGroup: /system.slice/wmbusmeters.service
           └─13734 /usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid

Apr 01 13:55:23 raspberrypi systemd[1]: Starting "wmbusmeters service"...
Apr 01 13:55:23 raspberrypi systemd[1]: Started "wmbusmeters service".
pi@raspberrypi:~/wmbusmeters $

Ich muss dann noch die Config und meinwasserzaehler rüberkopieren/schreiben und teste dann mal.

[Michi_Pi]

@hg6806 ja sieht gut aus.

wenn du die config änderst dann nochmal folgendes eingeben.

sudo systemctl daemon-reload
sudo systemctl restart wmbusmeters

[hg6806]

@michi_pi

So, es läuft jetzt endlich!!!
Was eine Geburt! Ich bin auch echt froh, das mit meinem Halbwissen durchgezogen zu haben.

Generell war wohl anfangs die Installation nicht in Ordnung, deshalb wurde der Service nicht gestartet.

Schön und einfacher wäre es trotzdem das Ganze mit dem CUL Adapter zu machen, aber ich glaube da ist man noch nicht so weit.

[Michi_Pi]

@hg6806 sagte in Wasserzähler (Funk 868) auslesen.:

Was eine Geburt!

das stimmt :D aber immerhin läuft es jetzt.

Ja ein Adapter wäre naturlich schon nice. Bei mir wurde mit dem CUL Adapter nichtmal der der Stick erkannt. Daraufhin bin ich dann auf wmbusmeters gestoßen.

Hatte anfangs auch schwierigkeiten, aber eher mit dem Stick als mit wmbusmeters. Allerdings läuft es jetzt seit Oktober ohne Probleme zuverlässig.