Was stoppt meinen Iobroker???
-
@homoran
ja das passt schon, ich meinte auch deine Anmerkung bezog sich eher auf deinen nachfolgenden Witz, also alles paletti! -
mit htop erscheint
iobroker.js-controller als am meisten die CPU belastend
PID: 697
-
@brokeling
Da läuft noch ein xrdp. Mach den Quark aus, wo auch immer du den aktiviert hast. Vermutlich in raspi-config.
Anmeldung dann per ssh.
Dann würde ich die Kiste aktuell halten:sudo apt update sudo apt dist-upgrade sudo reboot -
@thomas-braun said in Was stoppt meinen Iobroker???:
@brokeling
Da läuft noch ein xrdp. Mach den Quark aus, wo auch immer du den aktiviert hast. Vermutlich in raspi-config.Was istn das fürn Ding und wie krieg ich das los?
Ich geh über putty drauf. -
-
systemctl status xrdp -
@thomas-braun said in Was stoppt meinen Iobroker???:
systemctl status xrdp
also ich gebe es zu, ich bin da früher über remote-desktop draufgegangen.
pi@raspi:~ $ systemctl status xrdp ● xrdp.service - xrdp daemon Loaded: loaded (/lib/systemd/system/xrdp.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2021-01-12 18:31:54 CET; 2h 10min ago Docs: man:xrdp(8) man:xrdp.ini(5) Process: 706 ExecStartPre=/bin/sh /usr/share/xrdp/socksetup (code=exited, status=0/SUCCESS) Process: 722 ExecStart=/usr/sbin/xrdp $XRDP_OPTIONS (code=exited, status=0/SUCCESS) Main PID: 723 (xrdp) Tasks: 1 (limit: 4915) CGroup: /system.slice/xrdp.service └─723 /usr/sbin/xrdp Jan 12 18:31:53 raspi systemd[1]: Starting xrdp daemon... Jan 12 18:31:53 raspi xrdp[722]: (722)(-1225668496)[DEBUG] Testing if xrdp can listen on 0.0.0.0 port 3389. Jan 12 18:31:53 raspi xrdp[722]: (722)(-1225668496)[DEBUG] Closed socket 7 (AF_INET6 :: port 3389) Jan 12 18:31:53 raspi systemd[1]: xrdp.service: Can't open PID file /run/xrdp/xrdp.pid (yet?) after start: No such file or directory Jan 12 18:31:54 raspi systemd[1]: Started xrdp daemon. Jan 12 18:31:55 raspi xrdp[723]: (723)(-1225668496)[INFO ] starting xrdp with pid 723 Jan 12 18:31:55 raspi xrdp[723]: (723)(-1225668496)[INFO ] listening to port 3389 on 0.0.0.0 -
@brokeling Das solltest du nicht abstreiten, denn wenn das nicht von dir eingerichtet wurde, dann würde ich mir ernsthaft Gedanken machen.
sudo systemctl stop xrdp sudo systemctl disable xrdpIch würde das wohl auch komplett rauskicken:
sudo apt remove xrdpDas System hast du auf aktuellen Stand gebracht?
-
@thomas-braun
alles gemacht, hat 7 Minuten gedauert. Also war schon etwas zu tun!
Obwohl das letzte update nicht sooo lange her ist. -
@brokeling
Ja, da war ein neuer Kernel und ein eeprom-Update dabei. Das dauert. Ich hoffe du hast danach ein reboot gemacht?systemctl status xrdpsagt nun?
-
pi@raspi:~ $ systemctl status xrdp ● xrdp.service - xrdp daemon Loaded: loaded (/lib/systemd/system/xrdp.service; disabled; vendor preset: en Active: active (running) since Tue 2021-01-12 20:54:05 CET; 5min ago Docs: man:xrdp(8) man:xrdp.ini(5) Process: 715 ExecStartPre=/bin/sh /usr/share/xrdp/socksetup (code=exited, stat Process: 729 ExecStart=/usr/sbin/xrdp $XRDP_OPTIONS (code=exited, status=0/SUC Main PID: 751 (xrdp) Tasks: 1 (limit: 4915) CGroup: /system.slice/xrdp.service └─751 /usr/sbin/xrdp Jan 12 20:54:04 raspi systemd[1]: Starting xrdp daemon... Jan 12 20:54:04 raspi xrdp[729]: (729)(-1225656208)[DEBUG] Testing if xrdp can l Jan 12 20:54:04 raspi xrdp[729]: (729)(-1225656208)[DEBUG] Closed socket 7 (AF_I Jan 12 20:54:04 raspi systemd[1]: xrdp.service: Can't open PID file /run/xrdp/xr Jan 12 20:54:05 raspi systemd[1]: Started xrdp daemon. Jan 12 20:54:06 raspi xrdp[751]: (751)(-1225656208)[INFO ] starting xrdp with pi Jan 12 20:54:06 raspi xrdp[751]: (751)(-1225656208)[INFO ] listening to port 338 lines 1-19/19 (END) -
@brokeling
Der Kram läuft ja noch/wieder. Wolltest du den nicht ausknipsen?sudo systemctl stop xrdp sudo systemctl disable xrdp sudo apt remove xrdp -
@thomas-braun
oh ich glaub ich hab das remove vergessen!
mach ich sofort. komplett nochmal. -
pi@raspi:~ $ systemctl status xrdp ● xrdp.service Loaded: masked (Reason: Unit xrdp.service is masked.) Active: inactive (dead) pi@raspi:~ $ -
@brokeling Nach einem reboot sieht der so aus?
-
@thomas-braun
ja.
Ich hab sogar nochmal einen reboot gemacht. -
@brokeling
Gut.
Also X ist aus?ps aux | grep -i Xorgiobroker auf Stand?
iobroker update && iobroker upgrade -
@thomas-braun
den Hänger nach 30s hat er noch
pi@raspi:~ $ ps aux | grep -i Xorg pi 6674 0.0 0.0 7360 548 pts/0 S+ 21:17 0:00 grep --color=auto -i Xorg -
@brokeling
Langsam gehen mir die Ideen aus.
nodeJS sauber?which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs -
@thomas-braun
hier kamen auch noch ein paar Error:pi@raspi:~ $ iobroker update Used repository: default hash unchanged, use cached sources update done Adapter "admin" : 4.1.11 , installed 4.1.11 Adapter "alarm" : 1.8.3 Adapter "alexa2" : 3.5.0 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.7.0 , installed 1.7.0 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.0 Adapter "binance" : 1.1.3 Adapter "ble" : 0.12.0 Adapter "bmw" : 1.3.3 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.7 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.2.0 Adapter "bshb" : 0.1.10 Adapter "chromecast" : 2.3.1 , installed 2.3.1 Adapter "cloud" : 3.1.0 , installed 3.1.0 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.1 Adapter "coronavirus-statistics": 0.6.3 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.3.4 Adapter "daikin" : 1.2.0 Adapter "daswetter" : 3.0.4 Adapter "deconz" : 1.3.11 , installed 1.3.11 Adapter "denon" : 1.9.1 Adapter "device-reminder": 0.7.4 Adapter "devices" : 0.3.15 , installed 0.3.15 Adapter "digitalstrom" : 2.0.5 , installed 0.5.5 [Updateable] Adapter "discovergy" : 0.5.0 Adapter "discovery" : 2.4.1 , installed 2.3.11 [Updateable] Adapter "doorio" : 1.1.1 Adapter "ds18b20" : 1.1.5 Adapter "dwd" : 2.5.2 Adapter "ebus" : 2.2.3 Adapter "echarts" : 0.4.9 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.3 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fahrplan" : 1.0.0 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.1.0 , installed 1.1.0 Adapter "feiertage" : 1.0.17 Adapter "fhem" : 1.5.3 Adapter "find-my-iphone": 0.2.15 Adapter "firetv" : 1.0.0 Adapter "flot" : 1.10.6 , installed 1.9.2 [Updateable] Adapter "followthesun" : 0.2.5 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 , installed 0.2.4 Adapter "fronius" : 1.0.5 Adapter "frontier_silicon": 0.0.10 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 2.0.1 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "go-e" : 1.0.0 Adapter "growatt" : 0.0.15 Adapter "gruenbeck" : 0.0.21 Adapter "habpanel" : 0.4.3 Adapter "haier" : 1.0.2 Adapter "ham" : 3.0.2 Adapter "ham-wemo" : 1.1.0 Adapter "harmony" : 1.2.2 Adapter "heatingcontrol": 1.1.2 Adapter "heos" : 1.6.1 Adapter "heytech" : 1.0.0 Adapter "hid" : 0.1.17 Adapter "history" : 1.9.10 , installed 1.9.10 Adapter "hm-rega" : 3.0.6 Adapter "hm-rpc" : 1.14.24 Adapter "hmip" : 1.6.0 Adapter "homeconnect" : 0.0.31 Adapter "homee" : 1.1.0 Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.6 Adapter "hs100" : 2.0.1 Adapter "hue" : 3.3.8 , installed 3.3.5 [Updateable] Adapter "hue-extended" : 2.0.0 , installed 1.3.8 [Updateable] Adapter "i2c" : 1.1.1 Adapter "ical" : 1.7.4 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 , installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.9.3 Adapter "info" : 1.7.10 , installed 1.7.10 Adapter "innogy-smarthome": 0.3.6 Adapter "iogo" : 0.6.5 Adapter "iot" : 1.8.9 Adapter "iqontrol" : 1.5.0 Adapter "jarvis" : 2.0.0 Adapter "javascript" : 4.8.4 , installed 4.8.4 Adapter "jeelink" : 0.1.0 Controller "js-controller" : 3.1.6 , installed 3.1.6 Adapter "kecontact" : 1.0.1 Adapter "klf200" : 1.0.1 Adapter "km200" : 1.1.6 Adapter "knmi-weather" : 1.0.0 Adapter "knx" : 1.0.39 Adapter "kodi" : 2.0.4 Adapter "kostal-piko-ba": 1.1.5 Adapter "kress" : 2.5.5 Adapter "lametric" : 1.0.0 Adapter "landroid" : 1.0.3 Adapter "lcn" : 1.0.2 Adapter "legrand-ecocompteur": 1.0.0 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.10 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.10 Adapter "linkeddevices" : 1.4.2 Adapter "linux-control" : 1.1.0 Adapter "logparser" : 1.1.0 Adapter "lovelace" : 1.0.16 Adapter "loxone" : 2.1.0 Adapter "luftdaten" : 1.0.1 , installed 1.0.1 Adapter "lupusec" : 1.2.9 Adapter "luxtronik1" : 0.2.2 Adapter "material" : 0.13.9 Adapter "maxcube" : 1.0.2 Adapter "maxcul" : 1.3.1 Adapter "mbus" : 2.3.1 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "melcloud" : 1.0.6 Adapter "mercedesme" : 0.0.42 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.5.1 Adapter "meteoalarm" : 1.0.9 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 2.0.0 Adapter "mihome" : 1.3.6 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.1.1 Adapter "mikrotik" : 1.0.11 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "minuvis" : 1.0.0 Adapter "mobile" : 1.0.1 Adapter "modbus" : 3.1.10 Adapter "moma" : 1.2.7 , installed 1.2.7 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.14 , installed 2.1.14 Adapter "mqtt-client" : 1.3.1 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.7 Adapter "mysensors" : 2.0.1 Adapter "nanoleaf-lightpanels": 1.0.6 Adapter "netatmo" : 1.3.3 Adapter "netatmo-crawler": 0.3.9 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.23 Adapter "node-red" : 2.0.3 Adapter "nuki" : 1.4.2 , installed 1.4.2 Adapter "nuki-extended" : 2.3.0 Adapter "nut" : 1.3.0 Adapter "octoprint" : 1.0.3 Adapter "odl" : 1.0.7 Adapter "oilfox" : 0.0.5 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.4 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.1.0 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 1.0.0 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.0.7 , installed 0.0.7 Adapter "phantomjs" : 1.1.2 Adapter "pi-hole" : 1.3.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.12 , installed 1.4.12 Adapter "places" : 1.0.0 Adapter "plenticore" : 2.1.6 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "proxmox" : 1.0.1 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.3 , installed 2.0.3 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.7 Adapter "rflink" : 2.1.6 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 Adapter "s7" : 1.1.9 Adapter "samsung" : 0.2.9 , installed 0.2.9 Adapter "sayit" : 1.12.2 , installed 1.12.2 Adapter "sbfspot" : 4.0.2 Adapter "scenes" : 2.3.3 Adapter "schoolfree" : 0.7.0 Adapter "schwoerer-ventcube": 1.3.0 Adapter "shelly" : 4.0.3 Adapter "shuttercontrol": 1.0.4 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.1 Adapter "simple-api" : 2.4.8 , installed 2.4.8 Adapter "smappee" : 0.2.2 Adapter "smartcontrol" : 1.2.1 Adapter "smartgarden" : 1.0.1 Adapter "smartmeter" : 3.1.6 Adapter "snips" : 1.5.1 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.13 , installed 3.0.13 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.7.0 Adapter "sonoff" : 2.3.3 , installed 2.3.3 Adapter "sonos" : 2.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.15.3 , installed 1.15.3 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.0.0 Adapter "starline" : 1.0.0 Adapter "statistics" : 1.0.2 , installed 0.2.2 [Updateable] Adapter "stiebel-isg" : 1.6.0 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.3.2 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tahoma" : 0.3.2 Adapter "tankerkoenig" : 2.0.5 Adapter "telegram" : 1.6.0 , installed 1.6.0 Adapter "terminal" : 0.1.2 , installed 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 2.0.7 , installed 2.0.7 Adapter "tinker" : 1.1.0 Adapter "tr-064" : 4.2.2 , installed 4.2.1 [Updateable] Adapter "tradfri" : 2.6.5 Adapter "trashschedule" : 1.0.3 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.5.2 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.5.8 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.1.1 Adapter "vcard" : 0.0.9 Adapter "velux" : 0.0.6 Adapter "viessmann" : 1.3.2 Adapter "virtualpowermeter": 1.2.2 Adapter "vis" : 1.3.4 , installed 1.3.4 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets" : 1.1.7 , installed 1.1.4 [Updateable] Adapter "vis-icontwo" : 0.35.0 , installed 0.24.0 [Updateable] Adapter "vis-inventwo" : 2.5.11 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material-advanced": 1.3.0 Adapter "vis-metro" : 1.1.2 , installed 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "volvo" : 0.0.3 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.21 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.1.0 , installed 3.1.0 Adapter "weishaupt-wem" : 0.0.8 Adapter "whatsapp-cmb" : 0.1.6 , installed 0.1.6 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.5 Adapter "wled" : 0.5.2 Adapter "wm-bus" : 0.1.12 Adapter "wolf" : 1.2.1 Adapter "worx" : 1.2.3 Adapter "xbox" : 0.7.3 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.12.0 Adapter "yamaha" : 0.4.0 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 1.0.0 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.3.1 , installed 1.3.1 Adapter "zont" : 0.5.3 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.8.0 pi@raspi:~ $ iobroker upgrade Adapter "admin" is up to date. Adapter "alarm" is not installed. Adapter "alexa2" is not installed. Adapter "alpha2" is not installed. Adapter "amazon-dash" is not installed. Adapter "artnet" is not installed. Adapter "asterisk" is up to date. Adapter "asuswrt" is not installed. Adapter "b-control-em" is not installed. Adapter "backitup" is up to date. Adapter "beckhoff" is not installed. Adapter "benq" is not installed. Adapter "binance" is not installed. Adapter "ble" is not installed. Adapter "bmw" is not installed. Adapter "bosesoundtouch" is not installed. Adapter "botvac" is not installed. Adapter "bring" is not installed. Adapter "broadlink2" is not installed. Adapter "bsblan" is not installed. Adapter "bshb" is not installed. Adapter "chromecast" is up to date. Adapter "cloud" is up to date. Adapter "comfoair" is not installed. Adapter "contactid" is not installed. Adapter "coronavirus-statistics" is not installed. Adapter "countdown" is not installed. Adapter "cul" is not installed. Adapter "daikin" is not installed. Adapter "daswetter" is not installed. Adapter "deconz" is up to date. Adapter "denon" is not installed. Adapter "device-reminder" is not installed. Adapter "devices" is up to date. Update digitalstrom from @0.5.5 to @2.0.5 NPM version: 6.14.10 npm install iobroker.digitalstrom@2.0.5 --loglevel error --prefix "/opt/iobroker " (System call) In file included from ../authenticate_pam.cc:23: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1024:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1024:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ username->WriteUtf8(m->username, sizeof(m->username) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ password->WriteUtf8(m->password, sizeof(m->password) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void void init(Handle<Object> exports) { ^~~~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token void init(Handle<Object> exports) { ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope void init(Handle<Object> exports) { ^~~~~~~ In file included from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:737:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ ../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:737:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:314:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12) gyp ERR! System Linux 5.4.83-v7l+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v12.20.1 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok upload [4] digitalstrom.admin /opt/iobroker/node_modules/iobroker.digitalstrom/admin/words.js words.js application/javascript upload [3] digitalstrom.admin /opt/iobroker/node_modules/iobroker.digitalstrom/admin/style.css style.css text/css upload [2] digitalstrom.admin /opt/iobroker/node_modules/iobroker.digitalstrom/admin/index_m.html index_m.html text/html upload [1] digitalstrom.admin /opt/iobroker/node_modules/iobroker.digitalstrom/admin/digitalstrom.png digitalstrom.png image/png upload [0] digitalstrom.admin /opt/iobroker/node_modules/iobroker.digitalstrom/admin/admin.d.ts admin.d.ts video/mp2t Adapter "digitalstrom" updated Adapter "discovergy" is not installed. Update discovery from @2.3.11 to @2.4.1 NPM version: 6.14.10 npm install iobroker.discovery@2.4.1 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../authenticate_pam.cc:23: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’: ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1024:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations] Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ In file included from ../authenticate_pam.cc:23: ../../nan/nan.h:1024:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ ../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’: ../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked()); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:3553:51: note: declared here V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key)); ^~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ username->WriteUtf8(m->username, sizeof(m->username) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], unsigned int)’ password->WriteUtf8(m->password, sizeof(m->password) - 1); ^ In file included from /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:67, from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’ int WriteUtf8(Isolate* isolate, char* buffer, int length = -1, ^~~~~~~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/v8.h:2878:7: note: no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’ ../authenticate_pam.cc: At global scope: ../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void void init(Handle<Object> exports) { ^~~~~~ ../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r ../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token void init(Handle<Object> exports) { ^ ../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope void init(Handle<Object> exports) { ^~~~~~~ In file included from ../../nan/nan.h:54, from ../authenticate_pam.cc:23: ../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:737:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ ../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ NODE_MODULE(authenticate_pam, init); ^~~~ /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:737:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(authenticate_pam, init); ^~~~~~~~~~~ make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:314:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:276:12) gyp ERR! System Linux 5.4.83-v7l+ gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild" gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam gyp ERR! node -v v12.20.1 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../node_modules/nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:737:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.20.1/include/node/node.h:771:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^Cpi@raspi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v12.20.1 /usr/bin/node v12.20.1 /usr/bin/npm 6.14.10 nodejs: Installiert: 12.20.1-1nodesource1 Installationskandidat: 12.20.1-1nodesource1 Versionstabelle: *** 12.20.1-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.23.1~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
