[gelöst] ioBroker startet nicht mehr

Ham

Hallo,
hab ioBroker auf einem Tinkerboard S auf dem internen Speicher am laufen. Wollte nur das Board in ein anderes Gehäuse mit Lüfter umziehen, weil er immer sehr heiß wird. Hab dann noch die Befehle sudo upt-get update/upgrade ausgeführt, das wahr wahrscheinlich der Fehler! Jetzt läuft der ioBroker nicht mehr.
Hab schon einiges probiert, hab aber nicht so viel Erfahrung!
Jetzt könnte ich neu aufsetzen, hab aber die letzten Tage meine Poolsteuerung und andere Projekte realisiert und leider kein aktuelles Backup davon, deswegen muss das System wieder starten.
Ich bitte um Hilfe!
Hab Debian Buster mit node 12.10.3 und npm 6.14.6 installiert.
Bei dem Befehl ps -A | grep iobroker kommt nichts, wenn der js-Controller neu gestartet wird kommt:

internal/modules/cjs/loader.js:968
throw err;
^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/controller.js'
at Function.Module._resolveFilename (internal/modules/cjs/loader.js:965:15)
at Function.Module._load (internal/modules/cjs/loader.js:841:27)
at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:71:12)
at internal/main/run_main_module.js:17:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}
Hab auch versucht den controller, Admin und Discovery Adapter neu zu installieren, aber ohne Erfolg.
Desweiteren kommt die Meldung "No connection to states 192.168.178.32:6379[redis]"

Ich weiß leider nicht mehr weiter und bitte um Hilfe, das die Stundenlange Arbeit der letzten Tage nicht umsonst waren.
Danke!

Gruß Stefan

UncleSam

@Ham Hast du schon ein npm rebuild versucht?

cd /opt/iobroker
npm rebuild

Ham

@UncleSam sagte in ioBroker startet nicht mehr:

npm rebuild

Hallo, danke für die schnelle Antwort.

Habs grad probiert, dann kommt das hier(da kann ich aber nicht viel mit anfangen):

> @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=12.18.3 runtime=node arch=arm libc= platform=linux)
make: Entering directory '/opt/iobroker/node_modules/@serialport/bindings/build'
  CXX(target) Release/obj.target/bindings/src/serialport.o
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:78:69: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:135:71: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:175:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:215:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:270:68: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:314:68: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:363:76: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function 'Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)':
../src/serialport.cpp:409:70: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of 'ToParityEnum' [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of 'ToStopBitEnum' [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)' {aka 'void (*)(v8::Local<v8::Object>)'} to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function 'int setup(int, OpenBaton*)':
../src/serialport_unix.cpp:176:60: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: 'snprintf' output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function 'void EIO_Open(uv_work_t*)':
../src/serialport_unix.cpp:86:60: warning: '%s' directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: 'snprintf' output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
In file included from ../src/poller.cpp:1:
../../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Leaving directory '/opt/iobroker/node_modules/@serialport/bindings/build'

> serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate


iobroker.admin@4.1.6 /opt/iobroker/node_modules/iobroker.admin
@iobroker/adapter-core@2.4.0 /opt/iobroker/node_modules/@iobroker/adapter-core
@types/iobroker@3.0.11 /opt/iobroker/node_modules/@types/iobroker
@types/node@14.6.0 /opt/iobroker/node_modules/@types/node
body-parser@1.19.0 /opt/iobroker/node_modules/body-parser
bytes@3.1.0 /opt/iobroker/node_modules/bytes
content-type@1.0.4 /opt/iobroker/node_modules/content-type
debug@2.6.9 /opt/iobroker/node_modules/debug
ms@2.0.0 /opt/iobroker/node_modules/ms
depd@1.1.2 /opt/iobroker/node_modules/depd
http-errors@1.7.2 /opt/iobroker/node_modules/http-errors
inherits@2.0.3 /opt/iobroker/node_modules/inherits
setprototypeof@1.1.1 /opt/iobroker/node_modules/setprototypeof
statuses@1.5.0 /opt/iobroker/node_modules/statuses
toidentifier@1.0.0 /opt/iobroker/node_modules/toidentifier
iconv-lite@0.4.24 /opt/iobroker/node_modules/iconv-lite
safer-buffer@2.1.2 /opt/iobroker/node_modules/safer-buffer
on-finished@2.3.0 /opt/iobroker/node_modules/on-finished
ee-first@1.1.1 /opt/iobroker/node_modules/ee-first
qs@6.7.0 /opt/iobroker/node_modules/qs
raw-body@2.4.0 /opt/iobroker/node_modules/raw-body
unpipe@1.0.0 /opt/iobroker/node_modules/unpipe
type-is@1.6.18 /opt/iobroker/node_modules/type-is
media-typer@0.3.0 /opt/iobroker/node_modules/media-typer
mime-types@2.1.27 /opt/iobroker/node_modules/mime-types
mime-db@1.44.0 /opt/iobroker/node_modules/mime-db
connect-flash@0.1.1 /opt/iobroker/node_modules/connect-flash
cookie-parser@1.4.5 /opt/iobroker/node_modules/cookie-parser
cookie@0.4.0 /opt/iobroker/node_modules/cookie
cookie-signature@1.0.6 /opt/iobroker/node_modules/cookie-signature
express@4.17.1 /opt/iobroker/node_modules/express
accepts@1.3.7 /opt/iobroker/node_modules/accepts
negotiator@0.6.2 /opt/iobroker/node_modules/negotiator
array-flatten@1.1.1 /opt/iobroker/node_modules/array-flatten
content-disposition@0.5.3 /opt/iobroker/node_modules/content-disposition
safe-buffer@5.1.2 /opt/iobroker/node_modules/safe-buffer
encodeurl@1.0.2 /opt/iobroker/node_modules/encodeurl
escape-html@1.0.3 /opt/iobroker/node_modules/escape-html
etag@1.8.1 /opt/iobroker/node_modules/etag
finalhandler@1.1.2 /opt/iobroker/node_modules/finalhandler
parseurl@1.3.3 /opt/iobroker/node_modules/parseurl
fresh@0.5.2 /opt/iobroker/node_modules/fresh
merge-descriptors@1.0.1 /opt/iobroker/node_modules/merge-descriptors
methods@1.1.2 /opt/iobroker/node_modules/methods
path-to-regexp@0.1.7 /opt/iobroker/node_modules/path-to-regexp
proxy-addr@2.0.6 /opt/iobroker/node_modules/proxy-addr
forwarded@0.1.2 /opt/iobroker/node_modules/forwarded
ipaddr.js@1.9.1 /opt/iobroker/node_modules/ipaddr.js
range-parser@1.2.1 /opt/iobroker/node_modules/range-parser
send@0.17.1 /opt/iobroker/node_modules/send
destroy@1.0.4 /opt/iobroker/node_modules/destroy
mime@1.6.0 /opt/iobroker/node_modules/mime
ms@2.1.1 /opt/iobroker/node_modules/send/node_modules/ms
serve-static@1.14.1 /opt/iobroker/node_modules/serve-static
utils-merge@1.0.1 /opt/iobroker/node_modules/utils-merge
vary@1.1.2 /opt/iobroker/node_modules/vary
express-fileupload@1.2.0 /opt/iobroker/node_modules/express-fileupload
busboy@0.3.1 /opt/iobroker/node_modules/busboy
dicer@0.3.0 /opt/iobroker/node_modules/dicer
streamsearch@0.1.2 /opt/iobroker/node_modules/streamsearch
express-session@1.17.1 /opt/iobroker/node_modules/express-session
depd@2.0.0 /opt/iobroker/node_modules/express-session/node_modules/depd
on-headers@1.0.2 /opt/iobroker/node_modules/on-headers
safe-buffer@5.2.0 /opt/iobroker/node_modules/express-session/node_modules/safe-buffer
uid-safe@2.1.5 /opt/iobroker/node_modules/uid-safe
random-bytes@1.0.0 /opt/iobroker/node_modules/random-bytes
passport@0.4.1 /opt/iobroker/node_modules/passport
passport-strategy@1.0.0 /opt/iobroker/node_modules/passport-strategy
pause@0.0.1 /opt/iobroker/node_modules/pause
passport-local@1.0.0 /opt/iobroker/node_modules/passport-local
passport.socketio@3.7.0 /opt/iobroker/node_modules/passport.socketio
xtend@4.0.2 /opt/iobroker/node_modules/xtend
request@2.88.2 /opt/iobroker/node_modules/request
aws-sign2@0.7.0 /opt/iobroker/node_modules/aws-sign2
aws4@1.10.1 /opt/iobroker/node_modules/aws4
caseless@0.12.0 /opt/iobroker/node_modules/caseless
combined-stream@1.0.8 /opt/iobroker/node_modules/combined-stream
delayed-stream@1.0.0 /opt/iobroker/node_modules/delayed-stream
extend@3.0.2 /opt/iobroker/node_modules/extend
forever-agent@0.6.1 /opt/iobroker/node_modules/forever-agent
form-data@2.3.3 /opt/iobroker/node_modules/form-data
asynckit@0.4.0 /opt/iobroker/node_modules/asynckit
har-validator@5.1.5 /opt/iobroker/node_modules/har-validator
ajv@6.12.4 /opt/iobroker/node_modules/ajv
fast-deep-equal@3.1.3 /opt/iobroker/node_modules/fast-deep-equal
fast-json-stable-stringify@2.1.0 /opt/iobroker/node_modules/fast-json-stable-stringify
json-schema-traverse@0.4.1 /opt/iobroker/node_modules/json-schema-traverse
uri-js@4.2.2 /opt/iobroker/node_modules/uri-js
punycode@2.1.1 /opt/iobroker/node_modules/punycode
har-schema@2.0.0 /opt/iobroker/node_modules/har-schema
http-signature@1.2.0 /opt/iobroker/node_modules/http-signature
assert-plus@1.0.0 /opt/iobroker/node_modules/assert-plus
jsprim@1.4.1 /opt/iobroker/node_modules/jsprim
extsprintf@1.3.0 /opt/iobroker/node_modules/extsprintf
json-schema@0.2.3 /opt/iobroker/node_modules/json-schema
verror@1.10.0 /opt/iobroker/node_modules/verror
core-util-is@1.0.2 /opt/iobroker/node_modules/core-util-is
sshpk@1.16.1 /opt/iobroker/node_modules/sshpk
asn1@0.2.4 /opt/iobroker/node_modules/asn1
bcrypt-pbkdf@1.0.2 /opt/iobroker/node_modules/bcrypt-pbkdf
tweetnacl@0.14.5 /opt/iobroker/node_modules/tweetnacl
dashdash@1.14.1 /opt/iobroker/node_modules/dashdash
ecc-jsbn@0.1.2 /opt/iobroker/node_modules/ecc-jsbn
jsbn@0.1.1 /opt/iobroker/node_modules/jsbn
getpass@0.1.7 /opt/iobroker/node_modules/getpass
is-typedarray@1.0.0 /opt/iobroker/node_modules/is-typedarray
isstream@0.1.2 /opt/iobroker/node_modules/isstream
json-stringify-safe@5.0.1 /opt/iobroker/node_modules/json-stringify-safe
oauth-sign@0.9.0 /opt/iobroker/node_modules/oauth-sign
performance-now@2.1.0 /opt/iobroker/node_modules/performance-now
qs@6.5.2 /opt/iobroker/node_modules/request/node_modules/qs
tough-cookie@2.5.0 /opt/iobroker/node_modules/tough-cookie
psl@1.8.0 /opt/iobroker/node_modules/psl
tunnel-agent@0.6.0 /opt/iobroker/node_modules/tunnel-agent
uuid@3.4.0 /opt/iobroker/node_modules/uuid
semver@7.3.2 /opt/iobroker/node_modules/iobroker.admin/node_modules/semver
socket.io@2.3.0 /opt/iobroker/node_modules/socket.io
debug@4.1.1 /opt/iobroker/node_modules/socket.io/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io/node_modules/ms
engine.io@3.4.2 /opt/iobroker/node_modules/engine.io
base64id@2.0.0 /opt/iobroker/node_modules/base64id
cookie@0.3.1 /opt/iobroker/node_modules/engine.io/node_modules/cookie
debug@4.1.1 /opt/iobroker/node_modules/engine.io/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/engine.io/node_modules/ms
engine.io-parser@2.2.0 /opt/iobroker/node_modules/engine.io-parser
after@0.8.2 /opt/iobroker/node_modules/after
arraybuffer.slice@0.0.7 /opt/iobroker/node_modules/arraybuffer.slice
base64-arraybuffer@0.1.5 /opt/iobroker/node_modules/base64-arraybuffer
blob@0.0.5 /opt/iobroker/node_modules/blob
has-binary2@1.0.3 /opt/iobroker/node_modules/has-binary2
isarray@2.0.1 /opt/iobroker/node_modules/isarray
ws@7.3.1 /opt/iobroker/node_modules/ws
socket.io-adapter@1.1.2 /opt/iobroker/node_modules/socket.io-adapter
socket.io-client@2.3.0 /opt/iobroker/node_modules/socket.io-client
backo2@1.0.2 /opt/iobroker/node_modules/backo2
component-bind@1.0.0 /opt/iobroker/node_modules/component-bind
component-emitter@1.2.1 /opt/iobroker/node_modules/component-emitter
debug@4.1.1 /opt/iobroker/node_modules/socket.io-client/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io-client/node_modules/ms
engine.io-client@3.4.3 /opt/iobroker/node_modules/engine.io-client
component-emitter@1.3.0 /opt/iobroker/node_modules/engine.io-client/node_modules/component-emitter
component-inherit@0.0.3 /opt/iobroker/node_modules/component-inherit
debug@4.1.1 /opt/iobroker/node_modules/engine.io-client/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/engine.io-client/node_modules/ms
has-cors@1.1.0 /opt/iobroker/node_modules/has-cors
indexof@0.0.1 /opt/iobroker/node_modules/indexof
parseqs@0.0.5 /opt/iobroker/node_modules/parseqs
better-assert@1.0.2 /opt/iobroker/node_modules/better-assert
callsite@1.0.0 /opt/iobroker/node_modules/callsite
parseuri@0.0.5 /opt/iobroker/node_modules/parseuri
ws@6.1.4 /opt/iobroker/node_modules/engine.io-client/node_modules/ws
async-limiter@1.0.1 /opt/iobroker/node_modules/async-limiter
xmlhttprequest-ssl@1.5.5 /opt/iobroker/node_modules/xmlhttprequest-ssl
yeast@0.1.2 /opt/iobroker/node_modules/yeast
object-component@0.0.3 /opt/iobroker/node_modules/object-component
socket.io-parser@3.3.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser
debug@3.1.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser/node_modules/debug
ms@2.0.0 /opt/iobroker/node_modules/socket.io-client/node_modules/socket.io-parser/node_modules/ms
to-array@0.1.4 /opt/iobroker/node_modules/to-array
socket.io-parser@3.4.1 /opt/iobroker/node_modules/socket.io-parser
debug@4.1.1 /opt/iobroker/node_modules/socket.io-parser/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/socket.io-parser/node_modules/ms
iobroker.discovery@2.3.11 /opt/iobroker/node_modules/iobroker.discovery
netmask@1.0.6 /opt/iobroker/node_modules/netmask
node-mndp@0.0.3 /opt/iobroker/node_modules/node-mndp
node-ssdp@4.0.0 /opt/iobroker/node_modules/node-ssdp
async@2.6.3 /opt/iobroker/node_modules/async
lodash@4.17.20 /opt/iobroker/node_modules/lodash
bluebird@3.7.2 /opt/iobroker/node_modules/bluebird
debug@3.2.6 /opt/iobroker/node_modules/node-ssdp/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/node-ssdp/node_modules/ms
ip@1.1.5 /opt/iobroker/node_modules/ip
@serialport/parser-byte-length@8.0.6 /opt/iobroker/node_modules/@serialport/parser-byte-length
@serialport/parser-cctalk@8.0.6 /opt/iobroker/node_modules/@serialport/parser-cctalk
@serialport/parser-delimiter@8.0.6 /opt/iobroker/node_modules/@serialport/parser-delimiter
@serialport/parser-readline@8.0.6 /opt/iobroker/node_modules/@serialport/parser-readline
@serialport/parser-ready@8.0.6 /opt/iobroker/node_modules/@serialport/parser-ready
@serialport/parser-regex@8.0.6 /opt/iobroker/node_modules/@serialport/parser-regex
ansi-regex@2.1.1 /opt/iobroker/node_modules/ansi-regex
aproba@1.2.0 /opt/iobroker/node_modules/aproba
are-we-there-yet@1.1.5 /opt/iobroker/node_modules/are-we-there-yet
delegates@1.0.0 /opt/iobroker/node_modules/delegates
readable-stream@2.3.7 /opt/iobroker/node_modules/readable-stream
isarray@1.0.0 /opt/iobroker/node_modules/readable-stream/node_modules/isarray
process-nextick-args@2.0.1 /opt/iobroker/node_modules/process-nextick-args
string_decoder@1.1.1 /opt/iobroker/node_modules/string_decoder
util-deprecate@1.0.2 /opt/iobroker/node_modules/util-deprecate
base64-js@1.3.1 /opt/iobroker/node_modules/base64-js
bindings@1.5.0 /opt/iobroker/node_modules/bindings
file-uri-to-path@1.0.0 /opt/iobroker/node_modules/file-uri-to-path
buffer@5.6.0 /opt/iobroker/node_modules/buffer
ieee754@1.1.13 /opt/iobroker/node_modules/ieee754
chownr@1.1.4 /opt/iobroker/node_modules/chownr
code-point-at@1.1.0 /opt/iobroker/node_modules/code-point-at
console-control-strings@1.1.0 /opt/iobroker/node_modules/console-control-strings
decompress-response@4.2.1 /opt/iobroker/node_modules/decompress-response
mimic-response@2.1.0 /opt/iobroker/node_modules/mimic-response
deep-extend@0.6.0 /opt/iobroker/node_modules/deep-extend
dgram@1.0.1 /opt/iobroker/node_modules/dgram
dns-packet@1.3.1 /opt/iobroker/node_modules/dns-packet
end-of-stream@1.4.4 /opt/iobroker/node_modules/end-of-stream
once@1.4.0 /opt/iobroker/node_modules/once
wrappy@1.0.2 /opt/iobroker/node_modules/wrappy
expand-template@2.0.3 /opt/iobroker/node_modules/expand-template
fs-constants@1.0.0 /opt/iobroker/node_modules/fs-constants
gauge@2.7.4 /opt/iobroker/node_modules/gauge
has-unicode@2.0.1 /opt/iobroker/node_modules/has-unicode
object-assign@4.1.1 /opt/iobroker/node_modules/object-assign
signal-exit@3.0.3 /opt/iobroker/node_modules/signal-exit
string-width@1.0.2 /opt/iobroker/node_modules/string-width
is-fullwidth-code-point@1.0.0 /opt/iobroker/node_modules/is-fullwidth-code-point
number-is-nan@1.0.1 /opt/iobroker/node_modules/number-is-nan
strip-ansi@3.0.1 /opt/iobroker/node_modules/strip-ansi
wide-align@1.1.3 /opt/iobroker/node_modules/wide-align
github-from-package@0.0.0 /opt/iobroker/node_modules/github-from-package
ini@1.3.5 /opt/iobroker/node_modules/ini
minimist@1.2.5 /opt/iobroker/node_modules/minimist
mkdirp-classic@0.5.3 /opt/iobroker/node_modules/mkdirp-classic
napi-build-utils@1.0.2 /opt/iobroker/node_modules/napi-build-utils
nan@2.14.1 /opt/iobroker/node_modules/nan
noop-logger@0.1.1 /opt/iobroker/node_modules/noop-logger
npmlog@4.1.2 /opt/iobroker/node_modules/npmlog
set-blocking@2.0.0 /opt/iobroker/node_modules/set-blocking
pump@3.0.0 /opt/iobroker/node_modules/pump
simple-concat@1.0.1 /opt/iobroker/node_modules/simple-concat
simple-get@3.1.0 /opt/iobroker/node_modules/simple-get
strip-json-comments@2.0.1 /opt/iobroker/node_modules/strip-json-comments
tar-fs@2.1.0 /opt/iobroker/node_modules/tar-fs
tar-stream@2.1.3 /opt/iobroker/node_modules/tar-stream
bl@4.0.2 /opt/iobroker/node_modules/bl
inherits@2.0.4 /opt/iobroker/node_modules/bl/node_modules/inherits
readable-stream@3.6.0 /opt/iobroker/node_modules/bl/node_modules/readable-stream
readable-stream@3.6.0 /opt/iobroker/node_modules/tar-stream/node_modules/readable-stream
which-pm-runs@1.0.0 /opt/iobroker/node_modules/which-pm-runs
detect-libc@1.0.3 /opt/iobroker/node_modules/detect-libc
mkdirp@0.5.5 /opt/iobroker/node_modules/mkdirp
prebuild-install@5.3.5 /opt/iobroker/node_modules/prebuild-install
node-abi@2.18.0 /opt/iobroker/node_modules/node-abi
semver@5.7.1 /opt/iobroker/node_modules/node-abi/node_modules/semver
rc@1.2.8 /opt/iobroker/node_modules/rc
@serialport/binding-abstract@8.0.6 /opt/iobroker/node_modules/@serialport/binding-abstract
debug@4.1.1 /opt/iobroker/node_modules/@serialport/binding-abstract/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/binding-abstract/node_modules/ms
@serialport/binding-mock@8.0.6 /opt/iobroker/node_modules/@serialport/binding-mock
debug@4.1.1 /opt/iobroker/node_modules/@serialport/binding-mock/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/binding-mock/node_modules/ms
@serialport/bindings@8.0.8 /opt/iobroker/node_modules/@serialport/bindings
debug@4.1.1 /opt/iobroker/node_modules/@serialport/bindings/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/bindings/node_modules/ms
@serialport/stream@8.0.6 /opt/iobroker/node_modules/@serialport/stream
debug@4.1.1 /opt/iobroker/node_modules/@serialport/stream/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/@serialport/stream/node_modules/ms
mdns-discovery@0.2.6 /opt/iobroker/node_modules/mdns-discovery
debug@2.2.0 /opt/iobroker/node_modules/mdns-discovery/node_modules/debug
ms@0.7.1 /opt/iobroker/node_modules/mdns-discovery/node_modules/ms
serialport@8.0.8 /opt/iobroker/node_modules/serialport
debug@4.1.1 /opt/iobroker/node_modules/serialport/node_modules/debug
ms@2.1.2 /opt/iobroker/node_modules/serialport/node_modules/ms

Gruß Stefan

UncleSam

@Ham sagte in ioBroker startet nicht mehr:

Habs grad probiert, dann kommt das hier

Sieht meiner Ansicht nach gut aus. Keine Fehlermeldungen. Startet danach iobroker.js-controller immer noch nicht?
Dann könntest du noch ein npm i im ioBroker-Verzeichnis versuchen. Das sollte alle Abhängigkeiten installieren.

Ham

@UncleSam

Danke!

Nein der js-controller startet immer noch nicht. Selbe Fehlermeldung.
Bei dem Befehl npm i kommt:

npm WARN deprecated coffee-script@1.12.7: CoffeeScript on NPM has moved to "coffeescript" (no hyphen)
npm WARN deprecated request@2.88.0: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142

> iobroker.js-controller@3.1.6 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.8

> epoll@2.0.10 install /opt/iobroker/node_modules/epoll
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Leaving directory '/opt/iobroker/node_modules/epoll/build'

> diskusage@1.1.3 install /opt/iobroker/node_modules/diskusage
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/diskusage/build'
  CXX(target) Release/obj.target/diskusage/src/main.o
In file included from ../src/main.cpp:3:
../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from ../../nan/nan.h:56,
                 from ../src/main.cpp:3:
../src/main.cpp: At global scope:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/main.cpp:42:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(diskusage, Init)
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/diskusage/src/diskusage_posix.o
  SOLINK_MODULE(target) Release/obj.target/diskusage.node
  COPY Release/diskusage.node
make: Leaving directory '/opt/iobroker/node_modules/diskusage/build'

> unix-dgram@2.0.3 install /opt/iobroker/node_modules/unix-dgram
> node-gyp rebuild

make: Entering directory '/opt/iobroker/node_modules/unix-dgram/build'
  CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
In file included from ../src/unix_dgram.cc:5:
../../nan/nan.h: In function 'void Nan::AsyncQueueWorker(Nan::AsyncWorker*)':
../../nan/nan.h:2294:62: warning: cast between incompatible function types from 'void (*)(uv_work_t*)' {aka 'void (*)(uv_work_s*)'} to 'uv_after_work_cb' {aka 'void (*)(uv_work_s*, int)'} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from ../../nan/nan.h:56,
                 from ../src/unix_dgram.cc:5:
../src/unix_dgram.cc: At global scope:
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:608:43: warning: cast between incompatible function types from 'void (*)(v8::Local<v8::Object>)' to 'node::addon_register_func' {aka 'void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)'} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.3/include/node/node.h:642:3: note: in expansion of macro 'NODE_MODULE_X'
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/unix_dgram.cc:404:1: note: in expansion of macro 'NODE_MODULE'
 NODE_MODULE(unix_dgram, Initialize)
 ^~~~~~~~~~~
  SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
  COPY Release/unix_dgram.node
make: Leaving directory '/opt/iobroker/node_modules/unix-dgram/build'

> ursa-optional@0.9.10 install /opt/iobroker/node_modules/ursa-optional
> node rebuild.js

ursaNative bindings compilation fail. This is not an issue. Modules that depend on it will use fallbacks.

> iobroker@2.0.3 install /opt/iobroker/node_modules/iobroker
> node lib/checkVersions.js

NPM version: 6.14.8

> iobroker.js-controller@3.1.6 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

No connection to states 192.168.178.32:6379[redis]
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@^1.0.7 (node_modules/iobroker.info/node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.1.2 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

npm ERR! code ELIFECYCLE
npm ERR! errno 22
npm ERR! iobroker.js-controller@3.1.6 install: `node iobroker.js setup first`
npm ERR! Exit status 22
npm ERR!
npm ERR! Failed at the iobroker.js-controller@3.1.6 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-08-18T12_33_58_599Z-debug.log

UncleSam

@Ham sagte in ioBroker startet nicht mehr:

No connection to states 192.168.178.32:6379[redis]

Läuft dein Redis-Server auf der angegebenen Adresse oder ist das ein Konfigurationsfehler?

Wie sieht dein Setup aus? Ist es eine Master-Slave-Installation oder hast du nur eine ioBroker-Instanz auf dem Tinkerboard? Was ist das für eine IP-Adresse? Falls es die des Tinkerboards sein sollte, dann würde ich 127.0.0.1 verwenden (das funktioniert auch, wenn das Gerät die IP ändert).

UncleSam

Kannst du mal deine Konfiguration posten (evtl. sensible Daten rauslöschen):

cat /opt/iobroker/iobroker-data/iobroker.json

Ham

Danke für deine Hilfe!

Ja das ist die Adresse des Tinker. Master Slave hab ich, wobei das Slave System aktuell nicht erreichbar ist(hab mich aber noch nicht drum gekümmert, weil auf dem Slave noch nicht viel läuft)
Muß ich die Adresse in der redis.conf ändern?

hier die Konfiguration:

{
  "system": {
    "memoryLimitMB": 0,
    "hostname": ""
  },
  "multihostService": {
    "enabled": true,
    "secure": true,
    "password": ""
  },
  "network": {
    "IPv4": true,
    "IPv6": true,
    "bindAddress": null,
    "useSystemNpm": true
  },
  "objects": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9001], redis - [port 6379], couch - [port 5984].",
    "host": "0.0.0.0",
    "port": 9001,
    "user": "",
    "pass": "",
    "noFileCache": false,
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    }
  },
  "states": {
    "type": "redis",
    "typeComment": "Possible values: 'file' - [port 9000], 'redis' - [port 6379].",
    "host": "192.168.178.32",
    "port": 6379,
    "maxQueue": 1000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    }
  },
  "log": {
    "level": "info",
    "maxDays": 7,
    "noStdout": true,
    "transport": {
      "file1": {
        "type": "file",
        "enabled": true,
        "filename": "log/iobroker",
        "fileext": ".log",
        "maxsize": null,
        "maxFiles": null
      },
      "syslog1": {
        "type": "syslog",
        "enabled": false,
        "host": "localhost",
        "host_comment": "The host running syslogd, defaults to localhost.",
        "port_comment": "The port on the host that syslog is running on, defaults to syslogd's default port(514/UDP).",
        "protocol": "udp4",
        "protocol_comment": "The network protocol to log over (e.g. tcp4, udp4, unix, unix-connect, etc).",
        "path_comment": "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).",
        "facility_comment": "Syslog facility to use (Default: local0).",
        "localhost": "iobroker",
        "localhost_comment": "Host to indicate that log messages are coming from (Default: localhost).",
        "sysLogType_comment": "The type of the syslog protocol to use (Default: BSD).",
        "app_name_comment": "The name of the application (Default: process.title).",
        "eol_comment": "The end of line character to be added to the end of the message (Default: Message without modifications)."
      }
    }
  },
  "dataDirComment": "Always relative to iobroker.js-controller/",
  "dataDir": "../../iobroker-data/"

UncleSam

@Ham sagte in ioBroker startet nicht mehr:

Ja das ist die Adresse des Tinker.

Versuch mal die beiden "host": "xxx"zu ändern. Mir scheint auch der für die objects falsch zu sein. Beide sollten "127.0.0.1" als Wert haben.

Überprüfe auch, ob dein Redis überhaupt läuft (und ob der richtig konfiguriert ist). Der Redis sollte meines Erachtens einfach auf 0.0.0.0 hören. Bei mir steht in der redis.conf:
bind 0.0.0.0
Du kannst schon auf eine IP-Adresse binden, aber das braucht man eigentlich erst bei komplizierteren Setups (respektive bei erhöhter Sicherheit).

Ham

leider komme ich auch nicht mit dem Befehl iobroker setup custom weiter, da kommt diesselbe Fehlermeldung wie beim starten des js-controllers. Meintest du das ich da die beiden Host ändern sollte?

in der Redis.conf habe ich jetz auf 0.0.0.0 umgestellt, aber ohne Erfolg.

Ham

Sorry, habs jetzt verstanden.

Hab beide Hosts geändert, aber ohne Erfolg. IoBroker startet immer noch nicht

UncleSam

@Ham Jetzt musst du js-controller nochmals installieren: npm i.

Ham

@UncleSam
Er läut wieder!!! Super! Vielen Dank für die schnelle Hilfe!

Ich mach mal schnell eine Backup!

Aber warum das ganze, darf ich kein Update des Linux Systems machen? Und was war jetzt das Hauptproblem?

iobroker status spuckt mir das hier aus:

iobroker is running on this host.

No iobroker host is running.

Objects type: file
States type: redis
Cannot load "custom": Error: Connection is closed.

Ist das in Ordnung?

Gruß Stefan

UncleSam

@Ham sagte in ioBroker startet nicht mehr:

@UncleSam
Er läut wieder!!! Super! Vielen Dank für die schnelle Hilfe!

Nichts zu danken.

Aber warum das ganze, darf ich kein Update des Linux Systems machen? Und was war jetzt das Hauptproblem?

Eventuell war es nur die Objects-Konfig oder aber das ganze Redis-Gedöns.
Aber grundsätzlich sollte es schon möglich sein, ein Linux upzudaten, auf dem ioBroker läuft. Aber bei so vielen Abhängigkeiten kann schon mal was schief gehen.

iobroker status spuckt mir das hier aus:

iobroker is running on this host.

No iobroker host is running.

Bei mir sieht es mit Multihost und fünf angehängten Slaves so aus:

> iobroker status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: file
States  type: redis

Ich bin mir nicht sicher, ob er sich selber dazu zählt; sonst würde "No host" stimmen. Sofern du wieder aufs Admin kommst und deine Adapter laufen, sollte alles in Ordnung sein.

Ham

@UncleSam

nach der korrekten Multihost installation steht jetzt bei mir auch:

At least one iobroker host is running.

Nochmal Vielen Dank! Hat mir viel Arbeit erspart!

Gruß Stefan

Thomas Braun

@Ham

Aber warum das ganze, darf ich kein Update des Linux Systems machen?

Doch, solltest du sogar. Allerdings sollte man sich auch anschauen, welche Pakete da aktualisiert werden. Regelmäßig das System pflegen hilft da enorm den Überblick zu behalten.

NEWS

[gelöst] ioBroker startet nicht mehr

Support us

694

32.4k

81.4k

1.3m