NEWS
ZigBee neue/unbekannte Geräte - ab 1.2.0
-
@io_laurent Dieses Rollo hat einen Datenpunkt "reverse_direction", zumindest laut dieser Seite hier. Sieht für mich sehr verdächtig aus... müsste nur im ioBroker angeboten werden und fertig.
@Florian-Evers Ich hab das gelesen, aber um ehrlich zu sein, kann ich damit nix anfangen, das ist mir leider zu hoch :man-shrugging:
-
BITTE HIER NUR UNBEKANNTE GERÄTE REIN
was wir brauchen ist
am besten so eine Kachel nachdem man das Gerät angelernt hat (das geht immer)
und ein Link zu dem Gerät
wichtig ist es muss ein FRAGEZEICHEN Icon dazu geben UND eine genaue richtige Bezeichnung..
nur so können wir mit der Informationen was anfangenwenn da ein UNDEFINED steht müsst ihr so lange das Device anlernen bis es einen Namen/Bezeichnung preisgibt
eine Beschreibung was das Gerät kann währe auch hilfreich und ein Bild
wichtig:
Bitte unbedingt drauf achten die die genutzte Firmware auch aktuell ist..wie bekomme ich die Info :
im Log nach adapter Startzigbee.0 2020-01-09 09:22:54.893 info Starting Zigbee...steht
zigbee.0 2020-01-09 09:22:58.553 info Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20180815}}die revision ist die Firmware als Datum
revision":20180815hier im Beispiel vom 20180815 also sehr alt... Bitte nur mit neuer Firmware arbeiten (sollte von mitte 2019 sein)
-
@Mooo said in ZigBee neue/unbekannte Geräte - ab 1.2.0:
Also der Xiaomi Curtain Motor B1 müsste ja jetzt funktionieren oder?
Bei mir wird er nicht erkannt. Erst wenn ich in
"/opt/iobroker/node_modules/iobroker.zigbee/lib/devices.js"
den Namen des alten Curtain Motors auf "models: ['ZNCLDJ12LM'],"
ändere kann ich ihn steuern. :thinking_face:{ models: ['ZNCLDJ12LM'], icon: 'img/aqara_curtain.png', states: [states.curtain_position, states.curtain_running, states.curtain_stop], },Ich habe in der devices.js das model auf "ZNCLDJ12LM" geändert.
Gruss
-
@Mooo said in ZigBee neue/unbekannte Geräte - ab 1.2.0:
Also der Xiaomi Curtain Motor B1 müsste ja jetzt funktionieren oder?
Bei mir wird er nicht erkannt. Erst wenn ich in
"/opt/iobroker/node_modules/iobroker.zigbee/lib/devices.js"
den Namen des alten Curtain Motors auf "models: ['ZNCLDJ12LM'],"
ändere kann ich ihn steuern. :thinking_face:{ models: ['ZNCLDJ12LM'], icon: 'img/aqara_curtain.png', states: [states.curtain_position, states.curtain_running, states.curtain_stop], },Ich habe in der devices.js das model auf "ZNCLDJ12LM" geändert.
Gruss
Leider habe ich mit der V1.2.0 auch ein Problem.
Und zwar kann ich nicht mehr pairen.
Wenn ich auf den Knopf klicke bleibt das Feld weiß und nichts passiert.
Habe dann mal auf 1.1.1 downgegraded und auf auf die GIT Version 1.2.1 upgegraded.
Kann mit keiner Version pairen..Was passiert wenn ich die Instanz lösche und neu installiere, sind da alle Geräte weg?
Hier das Log.
zigbee.0 2020-08-16 16:20:12.305 error (3887) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/zn zigbee.0 2020-08-16 16:20:12.303 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:20:07.079 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:20:07.079 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:20:07.078 info (3887) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:19:57.075 error (3887) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackA zigbee.0 2020-08-16 16:19:57.073 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:19:23.655 debug (3887) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.655 debug (3887) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyUSB1"},{"comName":"/dev/ttyAMA0"}] zigbee.0 2020-08-16 16:19:23.531 debug (3887) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.531 debug (3887) getGroups result: {} zigbee.0 2020-08-16 16:19:23.490 debug (3887) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.482 debug (3887) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true zigbee.0 2020-08-16 16:19:17.102 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:19:17.101 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:19:17.099 debug (3887) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databa zigbee.0 2020-08-16 16:19:17.059 info (3887) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:15.808 debug (3887) statesDB connected zigbee.0 2020-08-16 16:19:15.807 debug (3887) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.787 debug (3887) States create System PubSub Client zigbee.0 2020-08-16 16:19:15.785 debug (3887) States create User PubSub Client zigbee.0 2020-08-16 16:19:15.773 debug (3887) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.770 debug (3887) objectDB connected zigbee.0 2020-08-16 16:19:15.764 debug (3887) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:15.737 debug (3887) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:15.732 debug (3887) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:15.690 debug (3887) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.104 warn (3867) Terminated (ADAPTER_ALREADY_RUNNING): Without reason zigbee.0 2020-08-16 16:19:11.103 error (3867) zigbee.0 already running zigbee.0 2020-08-16 16:19:11.097 debug (3867) statesDB connected zigbee.0 2020-08-16 16:19:11.096 debug (3867) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.077 debug (3867) States create System PubSub Client zigbee.0 2020-08-16 16:19:11.074 debug (3867) States create User PubSub Client zigbee.0 2020-08-16 16:19:11.063 debug (3867) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.060 debug (3867) objectDB connected zigbee.0 2020-08-16 16:19:11.054 debug (3867) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.028 debug (3867) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:11.027 debug (3867) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:11.026 debug (3867) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:11.022 debug (3867) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:10.977 debug (3867) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:07.518 info (3751) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:19:07.516 info (3751) terminating zigbee.0 2020-08-16 16:19:07.015 info (3751) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:19:07.013 info (3751) cleaned everything up... zigbee.0 2020-08-16 16:19:07.011 info (3751) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:18:50.155 info (3751) Zigbee started zigbee.0 2020-08-16 16:18:50.154 info (3751) 0x00158d000522a54f (addr 30798): MCCGQ01LM - Xiaomi MiJia door & window contact sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.152 info (3751) 0x00158d00045eb4e5 (addr 943): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.151 info (3751) 0x00158d00034df76e (addr 85): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.150 info (3751) 0x00158d0003546d1c (addr 13697): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.149 info (3751) 0x00158d000445d8ff (addr 51954): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.147 info (3751) 0x00158d000358d96d (addr 58044): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.146 info (3751) 0x00158d00039ea4f7 (addr 35317): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.145 info (3751) 0x00158d0003546c07 (addr 10122): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.143 info (3751) 0x00124b0019367acc (addr 49295): CC2530.ROUTER - Custom devices (DiY) [CC2530 router](http://ptvo.info/cc2530-based-zigbee-coordinator-and-router-112/) (Router) zigbee.0 2020-08-16 16:18:50.142 info (3751) 0x680ae2fffea8d588 (addr 57745): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.137 info (3751) 0x680ae2fffeaf1152 (addr 4524): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.129 info (3751) Currently 11 devices are joined: zigbee.0 2020-08-16 16:18:50.120 info (3751) --> transmitPower : high zigbee.0 2020-08-16 16:18:50.110 info (3751) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}} zigbee.0 2020-08-16 16:18:46.627 info (3751) Starting Zigbee... zigbee.0 2020-08-16 16:18:46.584 info (3751) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:18:39.642 info (2615) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:18:39.639 info (2615) terminating zigbee.0 2020-08-16 16:18:39.638 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-08-16 16:18:39.638 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:33) zigbee.0 2020-08-16 16:18:39.638 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:182:16) zigbee.0 2020-08-16 16:18:39.638 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:23:12) zigbee.0 2020-08-16 16:18:39.638 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:27:71 zigbee.0 2020-08-16 16:18:39.638 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:186:49) zigbee.0 2020-08-16 16:18:39.638 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:88:15) zigbee.0 2020-08-16 16:18:39.638 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:55) zigbee.0 2020-08-16 16:18:39.638 error (2615) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-08-16 16:18:39.633 info (2615) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:18:39.622 info (2615) cleaned everything up... zigbee.0 2020-08-16 16:18:39.619 info (2615) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:12:45.540 error at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49) zigbee.0 2020-08-16 16:12:45.540 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12) zigbee.0 2020-08-16 16:12:45.540 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71 zigbee.0 2020-08-16 16:12:45.540 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32) zigbee.0 2020-08-16 16:12:45.540 error (2615) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-08-16 16:12:45.538 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:45.242 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:45.241 info (2615) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:12:35.240 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:25:65) zigbee.0 2020-08-16 16:12:35.240 error at Generator.throw (<anonymous>) zigbee.0 2020-08-16 16:12:35.240 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:89:31) zigbee.0 2020-08-16 16:12:35.240 error (2615) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) zigbee.0 2020-08-16 16:12:35.239 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:15.376 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:15.315 info (2615) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true -
Leider habe ich mit der V1.2.0 auch ein Problem.
Und zwar kann ich nicht mehr pairen.
Wenn ich auf den Knopf klicke bleibt das Feld weiß und nichts passiert.
Habe dann mal auf 1.1.1 downgegraded und auf auf die GIT Version 1.2.1 upgegraded.
Kann mit keiner Version pairen..Was passiert wenn ich die Instanz lösche und neu installiere, sind da alle Geräte weg?
Hier das Log.
zigbee.0 2020-08-16 16:20:12.305 error (3887) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/zn zigbee.0 2020-08-16 16:20:12.303 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:20:07.079 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:20:07.079 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:20:07.078 info (3887) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:19:57.075 error (3887) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackA zigbee.0 2020-08-16 16:19:57.073 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:19:23.655 debug (3887) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.655 debug (3887) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyUSB1"},{"comName":"/dev/ttyAMA0"}] zigbee.0 2020-08-16 16:19:23.531 debug (3887) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.531 debug (3887) getGroups result: {} zigbee.0 2020-08-16 16:19:23.490 debug (3887) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.482 debug (3887) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true zigbee.0 2020-08-16 16:19:17.102 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:19:17.101 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:19:17.099 debug (3887) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databa zigbee.0 2020-08-16 16:19:17.059 info (3887) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:15.808 debug (3887) statesDB connected zigbee.0 2020-08-16 16:19:15.807 debug (3887) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.787 debug (3887) States create System PubSub Client zigbee.0 2020-08-16 16:19:15.785 debug (3887) States create User PubSub Client zigbee.0 2020-08-16 16:19:15.773 debug (3887) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.770 debug (3887) objectDB connected zigbee.0 2020-08-16 16:19:15.764 debug (3887) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:15.737 debug (3887) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:15.732 debug (3887) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:15.690 debug (3887) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.104 warn (3867) Terminated (ADAPTER_ALREADY_RUNNING): Without reason zigbee.0 2020-08-16 16:19:11.103 error (3867) zigbee.0 already running zigbee.0 2020-08-16 16:19:11.097 debug (3867) statesDB connected zigbee.0 2020-08-16 16:19:11.096 debug (3867) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.077 debug (3867) States create System PubSub Client zigbee.0 2020-08-16 16:19:11.074 debug (3867) States create User PubSub Client zigbee.0 2020-08-16 16:19:11.063 debug (3867) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.060 debug (3867) objectDB connected zigbee.0 2020-08-16 16:19:11.054 debug (3867) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.028 debug (3867) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:11.027 debug (3867) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:11.026 debug (3867) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:11.022 debug (3867) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:10.977 debug (3867) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:07.518 info (3751) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:19:07.516 info (3751) terminating zigbee.0 2020-08-16 16:19:07.015 info (3751) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:19:07.013 info (3751) cleaned everything up... zigbee.0 2020-08-16 16:19:07.011 info (3751) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:18:50.155 info (3751) Zigbee started zigbee.0 2020-08-16 16:18:50.154 info (3751) 0x00158d000522a54f (addr 30798): MCCGQ01LM - Xiaomi MiJia door & window contact sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.152 info (3751) 0x00158d00045eb4e5 (addr 943): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.151 info (3751) 0x00158d00034df76e (addr 85): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.150 info (3751) 0x00158d0003546d1c (addr 13697): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.149 info (3751) 0x00158d000445d8ff (addr 51954): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.147 info (3751) 0x00158d000358d96d (addr 58044): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.146 info (3751) 0x00158d00039ea4f7 (addr 35317): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.145 info (3751) 0x00158d0003546c07 (addr 10122): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.143 info (3751) 0x00124b0019367acc (addr 49295): CC2530.ROUTER - Custom devices (DiY) [CC2530 router](http://ptvo.info/cc2530-based-zigbee-coordinator-and-router-112/) (Router) zigbee.0 2020-08-16 16:18:50.142 info (3751) 0x680ae2fffea8d588 (addr 57745): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.137 info (3751) 0x680ae2fffeaf1152 (addr 4524): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.129 info (3751) Currently 11 devices are joined: zigbee.0 2020-08-16 16:18:50.120 info (3751) --> transmitPower : high zigbee.0 2020-08-16 16:18:50.110 info (3751) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}} zigbee.0 2020-08-16 16:18:46.627 info (3751) Starting Zigbee... zigbee.0 2020-08-16 16:18:46.584 info (3751) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:18:39.642 info (2615) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:18:39.639 info (2615) terminating zigbee.0 2020-08-16 16:18:39.638 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-08-16 16:18:39.638 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:33) zigbee.0 2020-08-16 16:18:39.638 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:182:16) zigbee.0 2020-08-16 16:18:39.638 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:23:12) zigbee.0 2020-08-16 16:18:39.638 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:27:71 zigbee.0 2020-08-16 16:18:39.638 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:186:49) zigbee.0 2020-08-16 16:18:39.638 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:88:15) zigbee.0 2020-08-16 16:18:39.638 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:55) zigbee.0 2020-08-16 16:18:39.638 error (2615) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-08-16 16:18:39.633 info (2615) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:18:39.622 info (2615) cleaned everything up... zigbee.0 2020-08-16 16:18:39.619 info (2615) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:12:45.540 error at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49) zigbee.0 2020-08-16 16:12:45.540 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12) zigbee.0 2020-08-16 16:12:45.540 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71 zigbee.0 2020-08-16 16:12:45.540 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32) zigbee.0 2020-08-16 16:12:45.540 error (2615) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-08-16 16:12:45.538 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:45.242 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:45.241 info (2615) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:12:35.240 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:25:65) zigbee.0 2020-08-16 16:12:35.240 error at Generator.throw (<anonymous>) zigbee.0 2020-08-16 16:12:35.240 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:89:31) zigbee.0 2020-08-16 16:12:35.240 error (2615) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) zigbee.0 2020-08-16 16:12:35.239 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:15.376 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:15.315 info (2615) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true@hg6806 sagte in ZigBee neue/unbekannte Geräte - ab 1.2.0:
Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
dein Problem steht doch hier.. eine löschung de rInstanz bring dir nix..
ziehmal den Stick ab und steck den wieder rein .. und starte den adapter neu
-
Leider habe ich mit der V1.2.0 auch ein Problem.
Und zwar kann ich nicht mehr pairen.
Wenn ich auf den Knopf klicke bleibt das Feld weiß und nichts passiert.
Habe dann mal auf 1.1.1 downgegraded und auf auf die GIT Version 1.2.1 upgegraded.
Kann mit keiner Version pairen..Was passiert wenn ich die Instanz lösche und neu installiere, sind da alle Geräte weg?
Hier das Log.
zigbee.0 2020-08-16 16:20:12.305 error (3887) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/zn zigbee.0 2020-08-16 16:20:12.303 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:20:07.079 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:20:07.079 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:20:07.078 info (3887) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:19:57.075 error (3887) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackA zigbee.0 2020-08-16 16:19:57.073 error (3887) Failed to start Zigbee zigbee.0 2020-08-16 16:19:23.655 debug (3887) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.655 debug (3887) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyUSB1"},{"comName":"/dev/ttyAMA0"}] zigbee.0 2020-08-16 16:19:23.531 debug (3887) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.531 debug (3887) getGroups result: {} zigbee.0 2020-08-16 16:19:23.490 debug (3887) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:23.482 debug (3887) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true zigbee.0 2020-08-16 16:19:17.102 debug (3887) Starting zigbee-herdsman... zigbee.0 2020-08-16 16:19:17.101 info (3887) Starting Zigbee... zigbee.0 2020-08-16 16:19:17.099 debug (3887) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databa zigbee.0 2020-08-16 16:19:17.059 info (3887) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:15.808 debug (3887) statesDB connected zigbee.0 2020-08-16 16:19:15.807 debug (3887) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.787 debug (3887) States create System PubSub Client zigbee.0 2020-08-16 16:19:15.785 debug (3887) States create User PubSub Client zigbee.0 2020-08-16 16:19:15.773 debug (3887) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:15.770 debug (3887) objectDB connected zigbee.0 2020-08-16 16:19:15.764 debug (3887) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:15.738 debug (3887) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:15.737 debug (3887) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:15.732 debug (3887) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:15.690 debug (3887) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.104 warn (3867) Terminated (ADAPTER_ALREADY_RUNNING): Without reason zigbee.0 2020-08-16 16:19:11.103 error (3867) zigbee.0 already running zigbee.0 2020-08-16 16:19:11.097 debug (3867) statesDB connected zigbee.0 2020-08-16 16:19:11.096 debug (3867) States connected to redis: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.077 debug (3867) States create System PubSub Client zigbee.0 2020-08-16 16:19:11.074 debug (3867) States create User PubSub Client zigbee.0 2020-08-16 16:19:11.063 debug (3867) Redis States: Use Redis connection: 127.0.0.1:9000 zigbee.0 2020-08-16 16:19:11.060 debug (3867) objectDB connected zigbee.0 2020-08-16 16:19:11.054 debug (3867) Objects connected to redis: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:11.028 debug (3867) Objects client initialize lua scripts zigbee.0 2020-08-16 16:19:11.027 debug (3867) Objects create User PubSub Client zigbee.0 2020-08-16 16:19:11.026 debug (3867) Objects create System PubSub Client zigbee.0 2020-08-16 16:19:11.022 debug (3867) Objects client ready ... initialize now zigbee.0 2020-08-16 16:19:10.977 debug (3867) Redis Objects: Use Redis connection: 127.0.0.1:9001 zigbee.0 2020-08-16 16:19:07.518 info (3751) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:19:07.516 info (3751) terminating zigbee.0 2020-08-16 16:19:07.015 info (3751) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:19:07.013 info (3751) cleaned everything up... zigbee.0 2020-08-16 16:19:07.011 info (3751) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:18:50.155 info (3751) Zigbee started zigbee.0 2020-08-16 16:18:50.154 info (3751) 0x00158d000522a54f (addr 30798): MCCGQ01LM - Xiaomi MiJia door & window contact sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.152 info (3751) 0x00158d00045eb4e5 (addr 943): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.151 info (3751) 0x00158d00034df76e (addr 85): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.150 info (3751) 0x00158d0003546d1c (addr 13697): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.149 info (3751) 0x00158d000445d8ff (addr 51954): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.147 info (3751) 0x00158d000358d96d (addr 58044): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.146 info (3751) 0x00158d00039ea4f7 (addr 35317): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.145 info (3751) 0x00158d0003546c07 (addr 10122): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) zigbee.0 2020-08-16 16:18:50.143 info (3751) 0x00124b0019367acc (addr 49295): CC2530.ROUTER - Custom devices (DiY) [CC2530 router](http://ptvo.info/cc2530-based-zigbee-coordinator-and-router-112/) (Router) zigbee.0 2020-08-16 16:18:50.142 info (3751) 0x680ae2fffea8d588 (addr 57745): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.137 info (3751) 0x680ae2fffeaf1152 (addr 4524): E1746 - IKEA TRADFRI signal repeater (Router) zigbee.0 2020-08-16 16:18:50.129 info (3751) Currently 11 devices are joined: zigbee.0 2020-08-16 16:18:50.120 info (3751) --> transmitPower : high zigbee.0 2020-08-16 16:18:50.110 info (3751) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}} zigbee.0 2020-08-16 16:18:46.627 info (3751) Starting Zigbee... zigbee.0 2020-08-16 16:18:46.584 info (3751) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:18:39.642 info (2615) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason zigbee.0 2020-08-16 16:18:39.639 info (2615) terminating zigbee.0 2020-08-16 16:18:39.638 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-08-16 16:18:39.638 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:33) zigbee.0 2020-08-16 16:18:39.638 error at Controller.stop (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:182:16) zigbee.0 2020-08-16 16:18:39.638 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:23:12) zigbee.0 2020-08-16 16:18:39.638 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:27:71 zigbee.0 2020-08-16 16:18:39.638 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:18:39.638 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:186:49) zigbee.0 2020-08-16 16:18:39.638 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:88:15) zigbee.0 2020-08-16 16:18:39.638 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/group.js:76:55) zigbee.0 2020-08-16 16:18:39.638 error (2615) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-08-16 16:18:39.633 info (2615) Zigbee: disabling joining new devices. zigbee.0 2020-08-16 16:18:39.622 info (2615) cleaned everything up... zigbee.0 2020-08-16 16:18:39.619 info (2615) Got terminate signal TERMINATE_YOURSELF zigbee.0 2020-08-16 16:12:45.540 error at binding.open.then.err (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-08-16 16:12:45.540 error at SerialPort.serialPort.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:134:49) zigbee.0 2020-08-16 16:12:45.540 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:23:12) zigbee.0 2020-08-16 16:12:45.540 error at new Promise (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:27:71 zigbee.0 2020-08-16 16:12:45.540 error at Generator.next (<anonymous>) zigbee.0 2020-08-16 16:12:45.540 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:136:32) zigbee.0 2020-08-16 16:12:45.540 error (2615) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-08-16 16:12:45.538 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:45.242 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:45.241 info (2615) Try to reconnect. 1 attempts left zigbee.0 2020-08-16 16:12:35.240 error at rejected (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:25:65) zigbee.0 2020-08-16 16:12:35.240 error at Generator.throw (<anonymous>) zigbee.0 2020-08-16 16:12:35.240 error at ZStackAdapter.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/adapter/zStackAdapter.js:89:31) zigbee.0 2020-08-16 16:12:35.240 error (2615) Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms) zigbee.0 2020-08-16 16:12:35.239 error (2615) Failed to start Zigbee zigbee.0 2020-08-16 16:12:15.376 info (2615) Starting Zigbee... zigbee.0 2020-08-16 16:12:15.315 info (2615) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.19.0 zigbee.0 2020-08-16 16:19:22.218 debug (3887) system.adapter.admin.0: logging true -
@hg6806 ich hatte gestern das gleiche Problem. Das hat bei mir gehokfen:
Adapter pausieren
Stick raus und wieder rein
Adapter startenDen Stick habe ich schon wie oft aus und wieder eingesteckt.
Mit oder ohne gestoppter Instanz.
NIX.
Pairing bleibt immer erfolglos.Hier nochmal ein Log, beim letzten war, warum auch immer ein Fehler.
zigbee.0 2020-08-17 07:46:41.496 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:46:41.495 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:46:41.495 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:46:41.494 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:41.494 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:46:41.493 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:35.496 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:46:35.495 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:46:35.495 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:46:35.494 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:35.493 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:46:35.492 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:29.490 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:29.489 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:46:23.487 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:23.486 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:46:17.487 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:17.486 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:46:17.485 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:11.485 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:11.484 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:46:11.483 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:05.483 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:05.483 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:59.482 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:45:59.481 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:53.482 debug (28124) Routing table succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:53.482 debug (28124) Routing for '0x680ae2fffeaf1152': undefined zigbee.0 2020-08-17 07:45:53.481 debug (28124) Failed to execute routing table for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:47.481 debug (28124) Routing table succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:47.481 debug (28124) Routing for '0x680ae2fffeaf1152': undefined zigbee.0 2020-08-17 07:45:47.480 debug (28124) Failed to execute routing table for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:41.481 debug (28124) LQI succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:41.480 debug (28124) Failed to execute LQI for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:35.483 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:45:35.483 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:45:35.482 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:45:35.481 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:45:35.480 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:45:35.479 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:29.479 debug (28124) LQI succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:29.478 debug (28124) Failed to execute LQI for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:23.478 debug (28124) Routing table succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:23.477 debug (28124) Routing for 'Coordinator': undefined zigbee.0 2020-08-17 07:45:23.477 debug (28124) Failed to execute routing table for 'Coordinator'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herds zigbee.0 2020-08-17 07:45:17.477 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:45:17.476 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:11.477 debug (28124) Routing table succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:11.477 debug (28124) Routing for 'Coordinator': undefined zigbee.0 2020-08-17 07:45:11.476 debug (28124) Failed to execute routing table for 'Coordinator'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herds zigbee.0 2020-08-17 07:45:05.476 debug (28124) LQI succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:05.475 debug (28124) Failed to execute LQI for 'Coordinator'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/u zigbee.0 2020-08-17 07:44:59.474 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:44:59.473 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:44:59.472 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:44:47.472 debug (28124) LQI succeeded for 'Coordinator' zigbee.0 2020-08-17 07:44:47.471 debug (28124) Failed to execute LQI for 'Coordinator'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/u zigbee.0 2020-08-17 07:44:43.850 debug (28124) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.849 debug (28124) getBinding result: [] zigbee.0 2020-08-17 07:44:43.698 debug (28124) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.696 debug (28124) getDevices result: [{"type":"device","common":{"name":"TRADFRI Signal Repeater","type":"E1746","icon":"img/ikea_repeater.png"},"native":{"id":"680ae2fffeaf1152"},"from":"system.adapter.zigbee. zigbee.0 2020-08-17 07:44:43.667 debug (28124) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.666 debug (28124) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyUSB1"},{"comName":"/dev/ttyAMA0"}] zigbee.0 2020-08-17 07:44:43.595 debug (28124) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.594 debug (28124) getGroups result: {} zigbee.0 2020-08-17 07:44:43.555 debug (28124) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:41.475 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:41.474 debug (28124) getMap result: {"lqis":[{"parent":"0x00124b000be67220","networkAddress":4524,"ieeeAddr":"0x680ae2fffeaf1152","lqi":0,"relationship":1,"depth":1,"status":"offline"},{"parent":"0x00124b000be672 zigbee.0 2020-08-17 07:44:41.473 debug (28124) Get map succeeded [{"parent":"0x00124b000be67220","networkAddress":4524,"ieeeAddr":"0x680ae2fffeaf1152","lqi":0,"relationship":1,"depth":1,"status":"offline"},{"parent":"0x00124b000be67220"," zigbee.0 2020-08-17 07:44:41.472 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:44:41.471 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:44:41.470 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb zigbee.0 2020-08-17 07:44:35.470 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:44:35.469 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsma zigbee.0 2020-08-17 07:44:35.399 debug (28124) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing! zigbee.0 2020-08-17 07:44:35.398 info (28124) Zigbee: allowing new devices to join. -
Den Stick habe ich schon wie oft aus und wieder eingesteckt.
Mit oder ohne gestoppter Instanz.
NIX.
Pairing bleibt immer erfolglos.Hier nochmal ein Log, beim letzten war, warum auch immer ein Fehler.
zigbee.0 2020-08-17 07:46:41.496 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:46:41.495 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:46:41.495 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:46:41.494 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:41.494 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:46:41.493 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:35.496 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:46:35.495 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:46:35.495 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:46:35.494 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:35.493 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:46:35.492 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:29.490 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:29.489 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:46:23.487 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:46:23.486 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:46:17.487 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:17.486 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:46:17.485 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:11.485 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:11.484 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:46:11.483 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:46:05.483 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:46:05.483 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:59.482 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:45:59.481 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:53.482 debug (28124) Routing table succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:53.482 debug (28124) Routing for '0x680ae2fffeaf1152': undefined zigbee.0 2020-08-17 07:45:53.481 debug (28124) Failed to execute routing table for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:47.481 debug (28124) Routing table succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:47.481 debug (28124) Routing for '0x680ae2fffeaf1152': undefined zigbee.0 2020-08-17 07:45:47.480 debug (28124) Failed to execute routing table for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:41.481 debug (28124) LQI succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:41.480 debug (28124) Failed to execute LQI for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:35.483 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:45:35.483 debug (28124) getMap result: {"lqis":[{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","network zigbee.0 2020-08-17 07:45:35.482 debug (28124) Get map succeeded [{"parent":"undefined","networkAddress":0,"ieeeAddr":"0x00124b000be67220","lqi":"undefined","relationship":0,"depth":0,"status":"offline"},{"parent":"undefined","networkAddre zigbee.0 2020-08-17 07:45:35.481 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:45:35.480 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:45:35.479 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:45:29.479 debug (28124) LQI succeeded for '0x680ae2fffeaf1152' zigbee.0 2020-08-17 07:45:29.478 debug (28124) Failed to execute LQI for '0x680ae2fffeaf1152'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:23.478 debug (28124) Routing table succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:23.477 debug (28124) Routing for 'Coordinator': undefined zigbee.0 2020-08-17 07:45:23.477 debug (28124) Failed to execute routing table for 'Coordinator'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herds zigbee.0 2020-08-17 07:45:17.477 debug (28124) LQI succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:45:17.476 debug (28124) Failed to execute LQI for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman zigbee.0 2020-08-17 07:45:11.477 debug (28124) Routing table succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:11.477 debug (28124) Routing for 'Coordinator': undefined zigbee.0 2020-08-17 07:45:11.476 debug (28124) Failed to execute routing table for 'Coordinator'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herds zigbee.0 2020-08-17 07:45:05.476 debug (28124) LQI succeeded for 'Coordinator' zigbee.0 2020-08-17 07:45:05.475 debug (28124) Failed to execute LQI for 'Coordinator'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/u zigbee.0 2020-08-17 07:44:59.474 debug (28124) Routing table succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:44:59.473 debug (28124) Routing for '0x680ae2fffea8d588': undefined zigbee.0 2020-08-17 07:44:59.472 debug (28124) Failed to execute routing table for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbe zigbee.0 2020-08-17 07:44:47.472 debug (28124) LQI succeeded for 'Coordinator' zigbee.0 2020-08-17 07:44:47.471 debug (28124) Failed to execute LQI for 'Coordinator'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsman/dist/u zigbee.0 2020-08-17 07:44:43.850 debug (28124) sendTo "getBinding" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.849 debug (28124) getBinding result: [] zigbee.0 2020-08-17 07:44:43.698 debug (28124) sendTo "getDevices" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.696 debug (28124) getDevices result: [{"type":"device","common":{"name":"TRADFRI Signal Repeater","type":"E1746","icon":"img/ikea_repeater.png"},"native":{"id":"680ae2fffeaf1152"},"from":"system.adapter.zigbee. zigbee.0 2020-08-17 07:44:43.667 debug (28124) sendTo "listUart" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.666 debug (28124) List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyUSB0"},{"comName":"/dev/ttyUSB1"},{"comName":"/dev/ttyAMA0"}] zigbee.0 2020-08-17 07:44:43.595 debug (28124) sendTo "getGroups" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:43.594 debug (28124) getGroups result: {} zigbee.0 2020-08-17 07:44:43.555 debug (28124) sendTo "getLibData" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:41.475 debug (28124) sendTo "getMap" to system.adapter.admin.0 from system.adapter.zigbee.0 zigbee.0 2020-08-17 07:44:41.474 debug (28124) getMap result: {"lqis":[{"parent":"0x00124b000be67220","networkAddress":4524,"ieeeAddr":"0x680ae2fffeaf1152","lqi":0,"relationship":1,"depth":1,"status":"offline"},{"parent":"0x00124b000be672 zigbee.0 2020-08-17 07:44:41.473 debug (28124) Get map succeeded [{"parent":"0x00124b000be67220","networkAddress":4524,"ieeeAddr":"0x680ae2fffeaf1152","lqi":0,"relationship":1,"depth":1,"status":"offline"},{"parent":"0x00124b000be67220"," zigbee.0 2020-08-17 07:44:41.472 debug (28124) Routing table succeeded for '0x00124b0019367acc' zigbee.0 2020-08-17 07:44:41.471 debug (28124) Routing for '0x00124b0019367acc': undefined zigbee.0 2020-08-17 07:44:41.470 debug (28124) Failed to execute routing table for '0x00124b0019367acc'. "Error: SRSP - ZDO - mgmtRtgReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigb zigbee.0 2020-08-17 07:44:35.470 debug (28124) LQI succeeded for '0x680ae2fffea8d588' zigbee.0 2020-08-17 07:44:35.469 debug (28124) Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsma zigbee.0 2020-08-17 07:44:35.399 debug (28124) sendTo "letsPairing" to system.adapter.admin.0 from system.adapter.zigbee.0: Start pairing! zigbee.0 2020-08-17 07:44:35.398 info (28124) Zigbee: allowing new devices to join. -
Was bedeutet das?
Failed to execute LQI for '0x680ae2fffea8d588'. "Error: SRSP - ZDO - mgmtLqiReq after 6000ms\n at Timeout.waiter.timer.setTimeout [as _onTimeout] (/opt/iobroker/node_modules/zigbee-herdsma@hg6806 sagte in ZigBee neue/unbekannte Geräte - ab 1.2.0:
LQI
das ist die ist die singnalstärke die das Gerät nicht übermitteln kann warum auch immer
zigbee hab ich, zwave auch, nuc's genauso und HA auch
-
@hg6806 sagte in ZigBee neue/unbekannte Geräte - ab 1.2.0:
LQI
das ist die ist die singnalstärke die das Gerät nicht übermitteln kann warum auch immer
So, da ich das Pairing einfach nicht mehr starten konnte, habe ich Instanz und Adapter gelöscht und neu aufgesetzt.
Jetzt geht es wieder.
Vielleicht lag es auch daran, dass ich CC2531 und parallel CC2538 in einer weiteren Instanz habe laufen lassen.
Nun nur noch den CC2538 -
So, da ich das Pairing einfach nicht mehr starten konnte, habe ich Instanz und Adapter gelöscht und neu aufgesetzt.
Jetzt geht es wieder.
Vielleicht lag es auch daran, dass ich CC2531 und parallel CC2538 in einer weiteren Instanz habe laufen lassen.
Nun nur noch den CC2538 -
@hg6806 im erst... man man man .. du steigst ja auch ins Auto wenn da schon einer auf dem Fahrersitz sitzt was... :confused:
-
-
@arteck für die OSL130C sollt noch das entsprechende Bild hinterlegt werden.
Ausserdem ist die Struktur nicht identisch mit FL130C, das die OSL130C nicht ...ColorTemp, sondern ...Color unterstützt.
Hier ein mögliches Bild:
-
@arteck
Hat ein wenig länger gedauert.... SorryHier den Fehler aus dem Log:
Ist genau das gleiche gerät wie dieses:
hat aber eine andere Model bezeichnung:
)
Support us
563
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge