Adapter lassen sich nicht mehr updaten ?
-
@tr1plx Okay, also irgendwie am Paketmanager vorbei ins System gedonnert.
Mal so ganz unter uns: Wie kommt man an solche 'Anleitungen'? Ich vermute mal du hast dir da irgendwelchen Mist zusammengegoogelt, oder?sudo rm /usr/local/bin/node sudo apt update sudo apt install nodejs --reinstall which node node -v -
@Thomas-Braun said in Adapter lassen sich nicht mehr updaten ?:
@tr1plx Okay, also irgendwie am Paketmanager vorbei ins System gedonnert.
Mal so ganz unter uns: Wie kommt man an solche 'Anleitungen'? Ich vermute mal du hast dir da irgendwelchen Mist zusammengegoogelt, oder?sudo rm /usr/local/bin/node sudo apt update sudo apt install nodejs --reinstall which node node -vJa sicher, was bleibt einem denn als Laie anderes übrig
Vermutlich habe ich mal was probiert, eine falsche Anleitung gefunden und damit was kaputt gemacht ohne es zu merken. ioBroker selbst funktioniert ja noch. Habe nur eben festgestellt, dass sich die Adapter nicht mehr updaten lassen und damit erst gemerkt, dass ich wohl mal was verpfuscht habemax@iobroker:~$ sudo rm /usr/local/bin/node [sudo] Passwort für max: max@iobroker:~$ sudo apt update Holen:1 http://security.debian.org/debian-security buster/updates InRelease [65,4 kB] OK:2 http://deb.debian.org/debian buster InRelease OK:3 http://deb.debian.org/debian buster-updates InRelease OK:4 https://deb.nodesource.com/node_12.x buster InRelease Holen:5 http://security.debian.org/debian-security buster/updates/main Sources [119 kB] Holen:6 http://security.debian.org/debian-security buster/updates/main amd64 Packages [197 kB] Holen:7 http://security.debian.org/debian-security buster/updates/main Translation-en [106 kB] Es wurden 487 kB in 1 s geholt (801 kB/s). Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. max@iobroker:~$ sudo apt install nodejs --reinstall Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig 0 aktualisiert, 0 neu installiert, 1 erneut installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 18,0 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. Holen:1 https://deb.nodesource.com/node_12.x buster/main amd64 nodejs amd64 12.16.3-1nodesource1 [18,0 MB] Es wurden 18,0 MB in 0 s geholt (36,3 MB/s). (Lese Datenbank ... 46205 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_12.16.3-1nodesource1_amd64.deb ... Detected old npm client, removing... Entpacken von nodejs (12.16.3-1nodesource1) über (12.16.3-1nodesource1) ... nodejs (12.16.3-1nodesource1) wird eingerichtet ... Trigger für man-db (2.8.5-2) werden verarbeitet ... max@iobroker:~$ which node /usr/bin/node max@iobroker:~$ node -v v12.16.3 max@iobroker:~$Danach mal einen reboot ausgeführt, hat leider aber keine Besserung gebracht:
$ ./iobroker upgrade Adapter "accuweather" is not installed. Adapter "admin" is up to date. Adapter "alarm" is not installed. Adapter "alexa2" is up to date.Adapter "alpha2" is not installed.Adapter "amazon-dash" is not installed. Adapter "artnet" is not installed.Adapter "asterisk" is not installed. Adapter "asuswrt" is not installed. Adapter "b-control-em" is not installed. Update backitup from @1.5.6 to @1.5.7 host.iobroker Adapter "system.adapter.backitup.0" is stopped. NPM version: 6.14.5 npm install iobroker.backitup@1.5.7 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:41:48: error: no matching function for call to ‘v8::Value::ToString()’ v8::String::Utf8Value path(info[0]->ToString()); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate: ‘v8::MaybeLocal<v8::String> v8::Value::ToString(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<String> ToString( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ Local<String> ToString(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate expects 1 argument, 0 provided Local<String> ToString(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:48:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’:../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:113:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’:../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’:../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’:../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:250:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 provided In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’:../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’:../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^ In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~../src/serialport.cpp:460:17: error: ‘Handle’ is not a member of ‘v8’ ../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ token void init(v8::Handle<v8::Object> target) { ^../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:36: note: suggested alternative: ‘tzset’ void init(v8::Handle<v8::Object> target) { ^~~~~~ tzset In file included from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ ../src/serialport.cpp:485:25: note: suggested alternative: ‘int’ NODE_MODULE(serialport, init); ^~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ make: *** [serialport.target.mk:114: Release/obj.target/serialport/src/serialport.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stack at ChildProcess.emit (events.js:310:20)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)gyp ERR! System Linux 4.19.0-9-amd64gyp ERR! command "/usr/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/iobroker.wm-bus/node_modules/serialportgyp ERR! node -v v12.16.3gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok npm ERR! code ELIFECYCLEnpm ERR! errno 1npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild`npm ERR! Exit status 1npm ERR! npm ERR! Failed at the serialport@6.2.2 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2020-05-13T19_24_27_565Z-debug.log upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png Adapter "backitup" updatedhost.iobroker Adapter "system.adapter.backitup.0" is started -
@tr1plx Hatte ich das mit dem Reboot gesagt? Kann mich nicht erinnern...
iobroker version iobroker stop iobroker fix -
@Thomas-Braun said in Adapter lassen sich nicht mehr updaten ?:
@tr1plx Hatte ich das mit dem Reboot gesagt? Kann mich nicht erinnern...
iobroker version iobroker stop iobroker fixTut mir leid, ich hatte danach versucht die Adapter zu installieren und es kamen die Fehler, da dachte ich vielleicht ein reboot wäre nicht schlecht.
max@iobroker:~$ iobroker version [sudo] Passwort für max: 3.1.4 max@iobroker:~$ iobroker stop max@iobroker:~$ iobroker fix library: loaded Library version=2020-04-12 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2020-04-12 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== OK:1 https://deb.nodesource.com/node_12.x buster InRelease OK:2 http://security.debian.org/debian-security buster/updates InRelease OK:3 http://deb.debian.org/debian buster InRelease OK:4 http://deb.debian.org/debian buster-updates InRelease Paketlisten werden gelesen... Fertig Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_09-02_00_21_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_09-02_00_32_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_10-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_10-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_11-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_11-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_12-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_12-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_13-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_13-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_09-02_00_21_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_09-02_00_32_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_10-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_10-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_11-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_11-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_12-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_12-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/iobroker_2020_05_13-02_00_20_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups/mysql_2020_05_13-02_00_26_iobroker_backupiobroker.tar.gz' wird geändert: Keine Berechtigung chown: der Eigentümer von '/opt/iobroker/backups' wird geändert: Keine Berechtigung This system does not support setting default permissions. Do not use npm to manually install adapters unless you know what you are doing! ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== max@iobroker:~$und nun ?
iobroker start und nochmal versuchen? -
ls -la /opt/iobroker/ | grep backupsWarum willst du immer rebooten? Das ist ein Linux, kein Windows.
-
@Thomas-Braun
das stimmt! ... der fixer hat aber jetzt erst den user iobroker zu sudoers hinzugefügt .... ergo ausloggen, neu einloggen und den fixer nochmals laufen lassen -
max@iobroker:~$ ls -la /opt/iobroker/ | grep backups drwxrwxrwx 1 max max 0 Mai 13 02:00 backups max@iobroker:~$ -
@harrym Stimmt auffallend. Und ich hatte mich jetzt natürlich über die fehlenden Rechte an dem Verzeichnis gewundert.
Also ausloggen und nochmal als 'max' rein.
sudo -u iobroker groups -
Sieht in der Tat besser aus
max@iobroker:~$ iobroker stop max@iobroker:~$ iobroker fix library: loaded Library version=2020-04-12 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2020-04-12 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/3) ========================================================================== [sudo] Passwort für max: OK:1 http://security.debian.org/debian-security buster/updates InRelease OK:2 http://deb.debian.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_12.x buster InRelease OK:4 http://deb.debian.org/debian buster-updates InRelease Paketlisten werden gelesen... Fertig Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/3) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Checking autostart (3/3) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== max@iobroker:~$iobroker start und nochmals versuchen?
-
@tr1plx ja ... start den broker
-
@harrym sagte in Adapter lassen sich nicht mehr updaten ?:
@Thomas-Braun
das stimmt! ... der fixer hat aber jetzt erst den user iobroker zu sudoers hinzugefügt .... ergo ausloggen, neu einloggen und den fixer nochmals laufen lassen Hmmm.... Mein 'ioboker' ist aber gar kein sudoer...
Dem gehört einfach alles in /opt/iobrokersudo -u iobroker groups iobroker tty dialout audio video bluetooth redis gpio i2cAber wurscht, der Fixer ist ja jetzt durch.
-
@Thomas-Braun gugg mal im fixer .... iobroker braucht teilweise sudo rechte
-
@harrym Das wollte ich mir eigentlich immer mal angeschaut haben, was da so gezaubert wird im Fixer. Mach ich mal bei Gelegenheit.
-
@Thomas-Braun said in Adapter lassen sich nicht mehr updaten ?:
sudo -u iobroker groups
max@iobroker:~$ sudo -u iobroker groups iobroker tty dialout audio video bluetooth max@iobroker:~$ich habe iobroker gestartet, aber leider lassen sich die Adapter noch immer nicht updaten.
-
-
@tr1plx fehler? noch immer der mim serialport?
-
@harrym said in Adapter lassen sich nicht mehr updaten ?:
@tr1plx fehler? noch immer der mim serialport?
Ja. ich habe jetzt mal nur den Backitup einzeln versucht:
$ ./iobroker upgrade backitup Update backitup from @1.5.6 to @1.5.7 host.iobroker Adapter "system.adapter.backitup.0" is stopped. NPM version: 6.14.5 npm install iobroker.backitup@1.5.7 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:41:48: error: no matching function for call to ‘v8::Value::ToString()’ v8::String::Utf8Value path(info[0]->ToString()); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate: ‘v8::MaybeLocal<v8::String> v8::Value::ToString(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<String> ToString( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2668:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate: ‘v8::Local<v8::String> v8::Value::ToString(v8::Isolate*) const’ Local<String> ToString(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2684:31: note: candidate expects 1 argument, 0 provided Local<String> ToString(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:48:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’:../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:113:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’:../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’:../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’:../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:250:53: error: no matching function for call to ‘v8::Value::ToObject()’ v8::Local<v8::Object> options = info[1]->ToObject(); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate: ‘v8::MaybeLocal<v8::Object> v8::Value::ToObject(v8::Local<v8::Context>) const’ V8_WARN_UNUSED_RESULT MaybeLocal<Object> ToObject( ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2672:44: note: candidate expects 1 argument, 0 providedIn file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate: ‘v8::Local<v8::Object> v8::Value::ToObject(v8::Isolate*) const’ Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2686:31: note: candidate expects 1 argument, 0 provided Local<Object> ToObject(Isolate* isolate) const); ^~~~~~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’:../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Value>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations] results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:27, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:67, from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(2, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’:../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations] data->callback.Call(1, argv); ^In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../../nan/nan.h:1740:3: note: declared here Call(int argc, v8::Local<v8::Value> argv[]) const { ^~~~../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^../src/serialport.cpp:460:17: error: variable or field ‘init’ declared void void init(v8::Handle<v8::Object> target) { ^~~~~~../src/serialport.cpp:460:17: error: ‘Handle’ is not a member of ‘v8’../src/serialport.cpp:460:34: error: expected primary-expression before ‘>’ token void init(v8::Handle<v8::Object> target) { ^../src/serialport.cpp:460:36: error: ‘target’ was not declared in this scope void init(v8::Handle<v8::Object> target) { ^~~~~~ ../src/serialport.cpp:460:36: note: suggested alternative: ‘tzset’ void init(v8::Handle<v8::Object> target) { ^~~~~~ tzsetIn file included from ../../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../src/serialport.cpp:485:25: error: ‘init’ was not declared in this scope NODE_MODULE(serialport, init); ^~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ ../src/serialport.cpp:485:25: note: suggested alternative: ‘int’ NODE_MODULE(serialport, init); ^~~~/home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ make: *** [serialport.target.mk:114: Release/obj.target/serialport/src/serialport.o] Fehler 1 gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stack at ChildProcess.emit (events.js:310:20)gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)gyp ERR! System Linux 4.19.0-9-amd64gyp ERR! command "/usr/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/iobroker.wm-bus/node_modules/serialportgyp ERR! node -v v12.16.3gyp ERR! node-gyp -v v5.1.0gyp ERR! not ok npm ERR! code ELIFECYCLEnpm ERR! errno 1npm ERR! serialport@6.2.2 install: `prebuild-install || node-gyp rebuild`npm ERR! Exit status 1npm ERR! npm ERR! Failed at the serialport@6.2.2 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2020-05-13T19_58_42_071Z-debug.log upload [3] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/words.js words.js application/javascript upload [2] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index_m.html index_m.html text/html upload [1] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/index.html index.html text/html upload [0] backitup.admin /opt/iobroker/node_modules/iobroker.backitup/admin/backitup.png backitup.png image/png Adapter "backitup" updatedhost.iobroker Adapter "system.adapter.backitup.0" is started process exited with code 0 nach kurzer Zeit erscheit er erneut unter updates. -
@harrym Ah, direkt drin, nicht über die Gruppe. Alles klar...
-
@tr1plx sagte in Adapter lassen sich nicht mehr updaten ?:
Adapter "backitup" updatedhost.iobroker Adapter "system.adapter.backitup.0" is started
alles gut! adapter ist up2date .... ignoriere den "fehler" vom serialport
-
nochmal, wie ganz am Anfang bereits gesagt.
Die Updates kommen nach ein paar Minuten wieder !
Die Instanz läuft, aber sie lässt sich nicht updaten.
Was hat es denn mit dem Serialport auf sich?
