UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Glasfaser]

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

3.0.14

Habe den Schritt noch nicht gemacht , hast du dich an die Anleitung gehalten , die
apollon77 geschrieben hat !?
Link Text

[Atredis]

@Homoran
#Nur um zu verhindern das Ich was falsch gemacht habe.
Was ist mit installationsverzeichniss genau gemeint.

Iobroker

andreas@debian64bit:/home/iobroker$ ls
andreas@debian64bit:/home/iobroker$ npm rebuild
andreas@debian64bit:/home/iobroker$ 

[Atredis]

@Glasfaser
Ja an Die Anleitung habe ich mich so wie ich mich erinner gehalten.
Ist schon ein paar Tage her und aufgrund meiner geringen Kenntnisse mache ich fast alles nach Anleitung.

Auch wenn man immer mehr das System begreift

[Homoran]

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

/home/iobroker$

das nicht!

üblicherweise /opt/iobroker

[Atredis]

Ok.

Habe das Verzeichniss jetzt mal genommen.
Komme aber auch nicht weiter

Manuelles entfernen klappt auch nicht

andreas@debian64bit:/opt/iobroker/node_modules$ npm uninstall homebridge-tado-platform
npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for homebridge-tado-platform@5.1.6: wanted: {"homebridge":"^0.4.46","node":"^10.15.3"} (current: {"node":"12.16.2","npm":"6.14.4"})
npm ERR! notsup Not compatible with your version of node/npm: homebridge-tado-platform@5.1.6
npm ERR! notsup Not compatible with your version of node/npm: homebridge-tado-platform@5.1.6
npm ERR! notsup Required: {"homebridge":"^0.4.46","node":"^10.15.3"}
npm ERR! notsup Actual:   {"npm":"6.14.4","node":"12.16.2"}

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-04-24T15_19_17_835Z-debug.log

[Atredis]

NPM Rebuild auch erfolglos

andreas@debian64bit:/opt/iobroker$ npm rebuild

> iobroker@2.0.3 install /opt/iobroker/node_modules/iobroker
> node lib/checkVersions.js

NPM version: 6.14.4

> iobroker@2.0.3 postinstall /opt/iobroker/node_modules/iobroker
> node lib/install.js

lib/install.js is not being run as part of an installation - skipping...

> @abandonware/noble@1.9.2-8 install /opt/iobroker/node_modules/@abandonware/noble
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird betreten
  SOLINK_MODULE(target) Release/obj.target/noble.node
  COPY Release/noble.node
make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird verlassen

> iobroker.javascript@4.5.1 postinstall /opt/iobroker/node_modules/iobroker.javascript
> node ./install/installTypings.js

Installing NodeJS typings...
latest @types: 13, installed node: 12

> iobroker.js-controller@3.0.14 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.4

> iobroker.js-controller@3.0.14 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

object system.certificates updated

The following notifications happened during sync: 
- Ignoring Directory "daswetter.admin" because officially not created as meta object. Please remove directory!
- Ignoring Directory "senec.admin" because officially not created as meta object. Please remove directory!


> nodemailer@6.4.6 postinstall /opt/iobroker/node_modules/nodemailer
> node -e "try{require('./postinstall')}catch(e){}"

=== Nodemailer 6.4.6 ===

Thank you for using Nodemailer for your email sending needs! While Nodemailer
itself is mostly meant to be a SMTP client there are other related projects in
the Nodemailer project as well.

For example:
> IMAP API (  https://imapapi.com  ) is a server application to easily access
IMAP accounts via REST API
> NodemailerApp (  https://nodemailer.com/app/  ) is a cross platform GUI app to
debug emails


> iobroker.vis@1.2.6 install /opt/iobroker/node_modules/iobroker.vis
> node main.js --install


> serialport@8.0.7 postinstall /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate



> @serialport/bindings@8.0.7 install /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild


> acme-v2@1.8.6 postinstall /opt/iobroker/node_modules/acme-v2
> node scripts/postinstall


Greenlock and ACME.js v3 are on the way!
Watch for updates at https://indiegogo.com/at/greenlock


> authenticate-pam@1.0.2 install /opt/iobroker/node_modules/authenticate-pam
> node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird betreten
  CXX(target) Release/obj.target/authenticate_pam/authenticate_pam.o
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1024:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
   Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args);
                                                                                       ^
In file included from ../authenticate_pam.cc:23:
../../nan/nan.h:1024:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../authenticate_pam.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE Authenticate(Nan::NAN_METHOD_ARGS_TYPE)’:
../authenticate_pam.cc:147:83: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   Local<Value> res = options->Get(Nan::New<String>("serviceName").ToLocalChecked());
                                                                                   ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:150:69: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’
    serviceName->WriteUtf8(m->serviceName, sizeof(m->serviceName) - 1);
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:152:69: warning: ‘v8::Local<v8::Value> v8::Object::Get(v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   res = options->Get(Nan::New<String>("remoteHost").ToLocalChecked());
                                                                     ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/v8-internal.h:14,
                 from /home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:27,
                 from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:3553:51: note: declared here
   V8_DEPRECATED("Use maybe version", Local<Value> Get(Local<Value> key));
                                                   ^~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8config.h:328:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../authenticate_pam.cc:155:66: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’
    remoteHost->WriteUtf8(m->remoteHost, sizeof(m->remoteHost) - 1);
                                                                  ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:160:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’
  username->WriteUtf8(m->username, sizeof(m->username) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc:161:58: error: no matching function for call to ‘v8::String::WriteUtf8(char [128], long unsigned int)’
  password->WriteUtf8(m->password, sizeof(m->password) - 1);
                                                          ^
In file included from /home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:67,
                 from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note: candidate: ‘int v8::String::WriteUtf8(v8::Isolate*, char*, int, int*, int) const’
   int WriteUtf8(Isolate* isolate, char* buffer, int length = -1,
       ^~~~~~~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/v8.h:2878:7: note:   no known conversion for argument 1 from ‘char [128]’ to ‘v8::Isolate*’
../authenticate_pam.cc: At global scope:
../authenticate_pam.cc:170:11: error: variable or field ‘init’ declared void
 void init(Handle<Object> exports) {
           ^~~~~~
../authenticate_pam.cc:170:11: error: ‘Handle’ was not declared in this scope
../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’
 void init(Handle<Object> exports) {
           ^~~~~~
           rand_r
../authenticate_pam.cc:170:24: error: expected primary-expression before ‘>’ token
 void init(Handle<Object> exports) {
                        ^
../authenticate_pam.cc:170:26: error: ‘exports’ was not declared in this scope
 void init(Handle<Object> exports) {
                          ^~~~~~~
In file included from ../../nan/nan.h:54,
                 from ../authenticate_pam.cc:23:
../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’
 NODE_MODULE(authenticate_pam, init);
                               ^~~~
/home/iobroker/.cache/node-gyp/12.16.2/include/node/node.h:608:36: note: in definition of macro ‘NODE_MODULE_X’
       (node::addon_register_func) (regfunc),                          \
                                    ^~~~~~~
../authenticate_pam.cc:175:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(authenticate_pam, init);
 ^~~~~~~~~~~
make: *** [authenticate_pam.target.mk:111: Release/obj.target/authenticate_pam/authenticate_pam.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/authenticate-pam/build“ wird verlassen
gyp ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:310:20)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:275:12)
gyp ERR! System Linux 4.19.0-6-amd64
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pam
gyp ERR! node -v v12.16.2
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok 
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! authenticate-pam@1.0.2 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the authenticate-pam@1.0.2 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2020-04-24T15_25_33_123Z-debug.log
andreas@debian64bit:/opt/iobroker$ 

[Homoran]

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

NPM Rebuild auch erfolglos

das log sagt ja auch warum:

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

wanted: {"homebridge":"^0.4.46","node":"^10.15.3"} (current: {"node":"12.16.2","npm":"6.14.4"

[Atredis]

Ja aber wie bekomme ich den Adapter gelöscht?

Im HAM habe ich Ihn entfernt.
Auch den HAM Adapter habe ich entfernt.
Er taucht nicht mehr auf.

Allerdings kam auch beim entfernen vom HAM die Fehlermeldung.

[Atredis]

Ok. Gibt wohl keine einfache Lösung für das Problem.
Dachte mir dann einfach Node Nodejs deinstallieren und die 10´er Installieren.

Leider auch nicht möglich

andreas@debian64bit:~$ sudo apt-get --purge remove node
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.       
Statusinformationen werden eingelesen.... Fertig
E: Paket node kann nicht gefunden werden.
andreas@debian64bit:~$ 
andreas@debian64bit:~$ node -v
v12.16.2
andreas@debian64bit:~$ which node
/usr/local/bin/node
andreas@debian64bit:~$ 

[Glasfaser]

@Atredis

Du hast doch VM ...
warum nimmst du kein Schnappschuss und gehst damit zurück !?

[Atredis]

Das werde ich wohl machen müssen. Wenn ich nur noch wüsste wann ich das Update gemacht habe.

Danke aber trotzdem für die mühen.

Um halt besser klar zu kommen wäre mir ein anderer Lösungsweg lieber gewesen.

[Glasfaser]

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

Wenn ich nur noch wüsste wann ich das Update gemacht habe.

Nach der Version JS 3.0.14 , im Bereich vom 21. Apr. 2020 + /-

Man kann doch in der Beschreibung vom Schnappschuss eine Notiz hinterlegen , was enthalten ist .

[Atredis]

@Glasfaser

Ja.
Jetzt bin ich da auch schlauer.
Mein NAS macht jeden Tag einen Snapshot.
Bin jetzt ein paar Tage zurück gegangen.
Vorher Update erstellt
Alles eingespielt.
Versucht den Adapter zu löschen.
Ging nicht weil er nicht da war.

Alles auf den neusten Stand gebracht.

Und es läuft wieder.

Mal im Auge behalten.
Vielleicht hat sich da auch nur irgendwas eingeschlichen.

Dann kann ich morgen mich ja wieder um meine Steuerung kümmern.

Aber danke fürs überlegen woran es gelegen haben kan

Dann würde ich den Beitrag hier mit gelöst schließen wenn ich das hin bekomme

[Glasfaser]

@Atredis sagte in Updates nicht mehr möglich wegen HAM Tato Adapter:

Vielleicht hat sich da auch nur irgendwas eingeschlichen.
Mein NAS macht jeden Tag einen Snapshot.

Ja ... ist keine Lösung wenn man ein Fehler hat ...

Aber ist besser bevor man sich alles zerschießt ;)