Adapter mihome-vacuum anpassungen
-
@Siggi0904
die eine Zeile sagt nicht viel aus da brauche ich mehr Infos. Hast du den vorherigen Adapter ganz gelöscht und neu über git instaliert ?falls du noch mehr Log hast, bitte posten oder beschreiben, wann der Fehler kommt.
-
@Issi Da dies der "alte" Adapter aus dem offiziellen Repo ist, habe ich vorher nicht den Adapter deinstalliert. Dein Adapter kommt ja erst noch ins offizielle Repo, oder?
Ja der kommt in die repo
Werde Ende nächster Woche da ein PR machen damit die anderen Jungs ihn erst mal durchsehen können da er komplett umgeschrieben wurde werden da wahrscheinlich alle Tests schief laufen 😂 aber dafür war ja auch die TestversionDann Solen die andern Entwickler ihn richtig durchsehen und wen ok über den Alten drüber bügeln
Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
-
Ja der kommt in die repo
Werde Ende nächster Woche da ein PR machen damit die anderen Jungs ihn erst mal durchsehen können da er komplett umgeschrieben wurde werden da wahrscheinlich alle Tests schief laufen 😂 aber dafür war ja auch die TestversionDann Solen die andern Entwickler ihn richtig durchsehen und wen ok über den Alten drüber bügeln
-
Ich möchte mich hier noch einmal kurz zu dem Thema äußern.
Da kosmix1980 offenbar mit meiner bisherigen Arbeit am
ioBroker.mihome-vacuumnicht zufrieden war und inzwischen selbst noch einmal einen eigenen Fix eingebracht hat, stellt sich für mich mittlerweile die Frage, warum ich meine Zeit überhaupt noch in solche Arbeiten investieren sollte.Ich habe mich nach längerer Zeit wieder hingesetzt und versucht, den Adapter nach bestem Wissen auf einen aktuellen und funktionierenden Stand zu bringen. Das Ganze mache ich nicht beruflich, sondern in meiner Freizeit. Gerade bei mir ist diese Zeit momentan nicht selbstverständlich, und ich habe dafür teilweise auch meine eigene Gesundheit zurückgestellt.
Wenn dann der Eindruck entsteht, dass die geleistete Arbeit nicht ausreichend ist, nicht wirklich gewürdigt wird oder direkt noch einmal durch einen anderen Fix ersetzt werden muss, ist das für mich sehr demotivierend.
Mir ist vollkommen bewusst, dass Open-Source-Projekte von Zusammenarbeit, Verbesserungen und unterschiedlichen Lösungsansätzen leben. Ich habe auch kein Problem damit, wenn jemand Fehler findet oder Dinge besser lösen kann. Allerdings kommt es für mich auch darauf an, wie miteinander und mit der investierten Arbeit umgegangen wird.
Unter diesen Umständen sehe ich aktuell ehrlich gesagt keinen wirklichen Grund mehr, meine Freizeit und Energie weiterhin dafür zu opfern, Adapter zu reparieren oder weiterzuentwickeln.
Das finde ich persönlich sehr schade, denn eigentlich hatte ich mich gefreut, nach meiner längeren Pause wieder etwas für ioBroker und die Community machen zu können.
Bitte benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
-
Ich möchte mich hier noch einmal kurz zu dem Thema äußern.
Da kosmix1980 offenbar mit meiner bisherigen Arbeit am
ioBroker.mihome-vacuumnicht zufrieden war und inzwischen selbst noch einmal einen eigenen Fix eingebracht hat, stellt sich für mich mittlerweile die Frage, warum ich meine Zeit überhaupt noch in solche Arbeiten investieren sollte.Ich habe mich nach längerer Zeit wieder hingesetzt und versucht, den Adapter nach bestem Wissen auf einen aktuellen und funktionierenden Stand zu bringen. Das Ganze mache ich nicht beruflich, sondern in meiner Freizeit. Gerade bei mir ist diese Zeit momentan nicht selbstverständlich, und ich habe dafür teilweise auch meine eigene Gesundheit zurückgestellt.
Wenn dann der Eindruck entsteht, dass die geleistete Arbeit nicht ausreichend ist, nicht wirklich gewürdigt wird oder direkt noch einmal durch einen anderen Fix ersetzt werden muss, ist das für mich sehr demotivierend.
Mir ist vollkommen bewusst, dass Open-Source-Projekte von Zusammenarbeit, Verbesserungen und unterschiedlichen Lösungsansätzen leben. Ich habe auch kein Problem damit, wenn jemand Fehler findet oder Dinge besser lösen kann. Allerdings kommt es für mich auch darauf an, wie miteinander und mit der investierten Arbeit umgegangen wird.
Unter diesen Umständen sehe ich aktuell ehrlich gesagt keinen wirklichen Grund mehr, meine Freizeit und Energie weiterhin dafür zu opfern, Adapter zu reparieren oder weiterzuentwickeln.
Das finde ich persönlich sehr schade, denn eigentlich hatte ich mich gefreut, nach meiner längeren Pause wieder etwas für ioBroker und die Community machen zu können.
Da kosmix1980 offenbar mit meiner bisherigen Arbeit am ioBroker.mihome-vacuum nicht zufrieden war
Davon habe ich nix mitbekommen.
nach bestem Wissen auf einen aktuellen und funktionierenden Stand zu bringen.
Und dies ist super. Sollte mehr davon geben.
Wir haben hier mittlerweile einige Adapter die nicht mehr laufen, so wie sie sollen. Und der ursprüngliche Entwickler meldet sich nicht mehr. Das ist schade.
Und wenn sich dann jemand dann mit einem "kaputten" Adapter beschäftigt und diesen wieder zum Laufen bringt, dann ist dies auch meiner Sicht klasse und dies ist zu unterstützen.Fazit:
Super Job für den Reparatur des Adapters. map läuft wieder einwandfrei.
Und auch bei diesem Adapter wollte der ursrüngliche ja nicht da dran. nach 2-3 maliger Nachfrage von mir kam immer die gleiche Antwort: "Habe momentan andere Prioritäten".Also nochmal von mir:
Adapter läuft.
Respekt für deine Reparatur.
und aus meiner Sicht: Bitte weiter so.Danke nochmal.
mfg
Dieter -
Ich möchte mich hier noch einmal kurz zu dem Thema äußern.
Da kosmix1980 offenbar mit meiner bisherigen Arbeit am
ioBroker.mihome-vacuumnicht zufrieden war und inzwischen selbst noch einmal einen eigenen Fix eingebracht hat, stellt sich für mich mittlerweile die Frage, warum ich meine Zeit überhaupt noch in solche Arbeiten investieren sollte.Ich habe mich nach längerer Zeit wieder hingesetzt und versucht, den Adapter nach bestem Wissen auf einen aktuellen und funktionierenden Stand zu bringen. Das Ganze mache ich nicht beruflich, sondern in meiner Freizeit. Gerade bei mir ist diese Zeit momentan nicht selbstverständlich, und ich habe dafür teilweise auch meine eigene Gesundheit zurückgestellt.
Wenn dann der Eindruck entsteht, dass die geleistete Arbeit nicht ausreichend ist, nicht wirklich gewürdigt wird oder direkt noch einmal durch einen anderen Fix ersetzt werden muss, ist das für mich sehr demotivierend.
Mir ist vollkommen bewusst, dass Open-Source-Projekte von Zusammenarbeit, Verbesserungen und unterschiedlichen Lösungsansätzen leben. Ich habe auch kein Problem damit, wenn jemand Fehler findet oder Dinge besser lösen kann. Allerdings kommt es für mich auch darauf an, wie miteinander und mit der investierten Arbeit umgegangen wird.
Unter diesen Umständen sehe ich aktuell ehrlich gesagt keinen wirklichen Grund mehr, meine Freizeit und Energie weiterhin dafür zu opfern, Adapter zu reparieren oder weiterzuentwickeln.
Das finde ich persönlich sehr schade, denn eigentlich hatte ich mich gefreut, nach meiner längeren Pause wieder etwas für ioBroker und die Community machen zu können.
@Issi Ich habe auch nichts mitbekommen, dass dich das trifft.
Bitte mach weiter und führe das Projekt weiter.Der nächste Schritt wäre, dass das bestehende Repo aktualisiert wird
und dann auch eine Stable folgt. Ich selbst nutze nämlich nur Stable.Bitte mach weiter, lass dich nicht von anderen aufhalten
sondern arbeitet zusammen an den Adaptern. -
Ich möchte mich hier noch einmal kurz zu dem Thema äußern.
Da kosmix1980 offenbar mit meiner bisherigen Arbeit am
ioBroker.mihome-vacuumnicht zufrieden war und inzwischen selbst noch einmal einen eigenen Fix eingebracht hat, stellt sich für mich mittlerweile die Frage, warum ich meine Zeit überhaupt noch in solche Arbeiten investieren sollte.Ich habe mich nach längerer Zeit wieder hingesetzt und versucht, den Adapter nach bestem Wissen auf einen aktuellen und funktionierenden Stand zu bringen. Das Ganze mache ich nicht beruflich, sondern in meiner Freizeit. Gerade bei mir ist diese Zeit momentan nicht selbstverständlich, und ich habe dafür teilweise auch meine eigene Gesundheit zurückgestellt.
Wenn dann der Eindruck entsteht, dass die geleistete Arbeit nicht ausreichend ist, nicht wirklich gewürdigt wird oder direkt noch einmal durch einen anderen Fix ersetzt werden muss, ist das für mich sehr demotivierend.
Mir ist vollkommen bewusst, dass Open-Source-Projekte von Zusammenarbeit, Verbesserungen und unterschiedlichen Lösungsansätzen leben. Ich habe auch kein Problem damit, wenn jemand Fehler findet oder Dinge besser lösen kann. Allerdings kommt es für mich auch darauf an, wie miteinander und mit der investierten Arbeit umgegangen wird.
Unter diesen Umständen sehe ich aktuell ehrlich gesagt keinen wirklichen Grund mehr, meine Freizeit und Energie weiterhin dafür zu opfern, Adapter zu reparieren oder weiterzuentwickeln.
Das finde ich persönlich sehr schade, denn eigentlich hatte ich mich gefreut, nach meiner längeren Pause wieder etwas für ioBroker und die Community machen zu können.
-
Hallo,
ich habe alle nötigen Upates durchgeführt, den alten Adapter gelöschgt und über die Katze - Benutzerdefiniert über den Link (https://github.com/xXBJXx/ioBroker.mihome-vacuum/tree/fix/xiaomi-cloud-qr-login) neu installiert. Die Installation schlägt aber leider fehl: Kann jemand weiterhelfen, warum?Ich füge das log auch bei2026-08-16T09_30_49_884Z-debug-0.log
$ iobroker url https://github.com/xXBJXx/ioBroker.mihome-vacuum/tree/fix/xiaomi-cloud-qr-login --host iobroker --debug install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login NPM version: 10.9.4Installing xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login... (System call) npm error code 2 npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error error TS2688: Cannot find type definition file for 'bl'.npm error The file is in the program because:npm error Entry point for implicit type library 'bl'npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9npm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_31_33_576Z-debug-0.lognpm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_30_49_884Z-debug-0.log npm error code 2npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error error TS2688: Cannot find type definition file for 'bl'.npm error The file is in the program because:npm error Entry point for implicit type library 'bl'npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9npm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_31_33_576Z-debug-0.lognpm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_30_49_884Z-debug-0.loghost.iobroker Cannot install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login: 2 ERROR: Process exited with code 25 -
Hallo,
ich habe alle nötigen Upates durchgeführt, den alten Adapter gelöschgt und über die Katze - Benutzerdefiniert über den Link (https://github.com/xXBJXx/ioBroker.mihome-vacuum/tree/fix/xiaomi-cloud-qr-login) neu installiert. Die Installation schlägt aber leider fehl: Kann jemand weiterhelfen, warum?Ich füge das log auch bei2026-08-16T09_30_49_884Z-debug-0.log
$ iobroker url https://github.com/xXBJXx/ioBroker.mihome-vacuum/tree/fix/xiaomi-cloud-qr-login --host iobroker --debug install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login NPM version: 10.9.4Installing xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login... (System call) npm error code 2 npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error error TS2688: Cannot find type definition file for 'bl'.npm error The file is in the program because:npm error Entry point for implicit type library 'bl'npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9npm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_31_33_576Z-debug-0.lognpm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_30_49_884Z-debug-0.log npm error code 2npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error error TS2688: Cannot find type definition file for 'bl'.npm error The file is in the program because:npm error Entry point for implicit type library 'bl'npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.22.0 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.22.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.22.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.22.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1244:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1244 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.22.0/include/node/node.h:1278:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1278 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-clonehf5yn9npm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_31_33_576Z-debug-0.lognpm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-16T09_30_49_884Z-debug-0.loghost.iobroker Cannot install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login: 2 ERROR: Process exited with code 25node@v22.22.0
Updaten... -
Du sollst es ja auch nicht installieren sondern aktuell halten. Den Rest von der Kiste dann auch...
Aktuell wärenodejs -v v22.23.2 -
node -v
root@iobroker:/opt/iobroker# node -v
v22.22.0Ich probiere mal ein update durchzuführen, das alles aktuell ist
UND HAMPEL NICHT ALS ROOT HERUM!!!!!!!!!
-
Geht bei mir auch nicht.
NPM version: 10.9.8 Installing xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login... (System call) npm error code 2 npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuild npm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error ../../../../node_modules/@types/cacheable-request/index.d.ts(26,42): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(77,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(81,69): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(84,71): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(89,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(95,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(104,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(108,70): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(112,73): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(115,76): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(118,60): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.5.0npm error gyp info using node@22.23.2 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.23.2/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.23.2',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.23.2/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1243:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1243 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1277:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1277 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.5.0npm error gyp info using node@22.23.2 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.23.2/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.23.2',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.23.2/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1243:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1243 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1277:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1277 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OHnpm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-17T17_59_47_830Z-debug-0.log npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-17T17_59_39_609Z-debug-0.log npm error code 2npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/opt/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > canvas@3.2.3 installnpm error > prebuild-install -r napi || node-gyp rebuildnpm errornpm errornpm error > diskusage@1.2.0 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build'npm error CXX(target) Release/obj.target/diskusage/src/main.onpm error CXX(target) Release/obj.target/diskusage/src/diskusage_posix.onpm error SOLINK_MODULE(target) Release/obj.target/diskusage.nodenpm error COPY Release/diskusage.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build'npm errornpm error > unix-dgram@2.0.6 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build'npm error CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.onpm error SOLINK_MODULE(target) Release/obj.target/unix_dgram.nodenpm error COPY Release/unix_dgram.nodenpm error make: Leaving directory '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build'npm errornpm error > esbuild@0.11.23 postinstallnpm error > node install.jsnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 preparenpm error > npm run buildnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 buildnpm error > npm run build:backend && npm run build:adminnpm errornpm errornpm error > iobroker.mihome-vacuum@5.3.0 build:backendnpm error > tsc -p tsconfig.build.jsonnpm errornpm error ../../../../node_modules/@types/cacheable-request/index.d.ts(26,42): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(77,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(81,69): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(84,71): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(89,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(95,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(104,51): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(108,70): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(112,73): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(115,76): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error ../../../../node_modules/@types/cacheable-request/index.d.ts(118,60): error TS2709: Cannot use namespace 'ResponseLike' as a type.npm error npm warn using --force Recommended protections disabled.npm error npm warn deprecated glob@10.5.0: Old versions of glob are not supported, and contain widely publicized security vulnerabilities, which have been fixed in the current version. Please update. Support for old versions may be purchased (at exorbitant rates) by contacting i@izs.menpm error npm warn deprecated cronstrue@2.61.0: Non-backwards compatible Breaking changesnpm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.5.0npm error gyp info using node@22.23.2 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.23.2/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.23.2',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.23.2/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/diskusage',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error In file included from ../../nan/nan.h:67,npm error from ../src/main.cpp:3:npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1243:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1243 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1277:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1277 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’npm error 42 | NODE_MODULE(diskusage, Init)npm error | ^~~~~~~~~~~npm error <command-line>: warning: "_GLIBCXX_USE_CXX11_ABI" redefinednpm error <command-line>: note: this is the location of the previous definitionnpm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.5.0npm error gyp info using node@22.23.2 | linux | x64npm error gyp info find Python using Python version 3.11.2 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/opt/iobroker/.cache/node-gyp/22.23.2/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/opt/iobroker/.cache/node-gyp/22.23.2',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/opt/iobroker/.cache/node-gyp/22.23.2/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OH/node_modules/unix-dgram',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error In file included from ../../nan/nan.h:67,npm error from ../src/unix_dgram.cc:5:npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1243:7: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]npm error 1243 | (node::addon_register_func) (regfunc), \npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~npm error /opt/iobroker/.cache/node-gyp/22.23.2/include/node/node.h:1277:3: note: in expansion of macro ‘NODE_MODULE_X’npm error 1277 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage)npm error | ^~~~~~~~~~~~~npm error ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’npm error 404 | NODE_MODULE(unix_dgram, Initialize)npm error | ^~~~~~~~~~~npm error gyp info ok npm error npm warn using --force Recommended protections disabled.npm error npm warn using --force Recommended protections disabled.npm error npm error code 2npm error npm error path /opt/iobroker/.npm/_cacache/tmp/git-cloneYAP0OHnpm error npm error command failednpm error npm error command sh -c npm run buildnpm error npm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-17T17_59_47_830Z-debug-0.lognpm error A complete log of this run can be found in: /opt/iobroker/.npm/_logs/2026-08-17T17_59_39_609Z-debug-0.log host.6cf6d49071ea Cannot install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login: 2 ERROR: Process exited with code 25 -
node ist nun v22.23.2, geht trotzdem nicht zu installieren. ich werde wohl eine neue docker image installieren müssen
Hier 'geht es'. Allerdings auf einem "richtigen" System.
thomas@testpi:~ $ iobroker url https://github.com/xXBJXx/ioBroker.mihome-vacuum/tree/fix/xiaomi-cloud-qr-login --host testpi --debug install xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login NPM version: 10.9.8 Installing xXBJXx/ioBroker.mihome-vacuum#fix/xiaomi-cloud-qr-login... (System call) npm warn deprecated prebuild-install@7.1.3: No longer maintained. Please contact the author of the relevant native addon; alternatives are available. > iobroker.mihome-vacuum@5.3.0 prepare > npm run build > iobroker.mihome-vacuum@5.3.0 build > npm run build:backend && npm run build:admin > iobroker.mihome-vacuum@5.3.0 build:backend > tsc -p tsconfig.build.json > iobroker.mihome-vacuum@5.3.0 build:admin > vite build --config src-admin/vite.config.ts vite v8.2.0 building client environment for production... transforming...✓ 11885 modules transformed. rendering chunks... computing gzip size... admin/index.html 0.41 kB │ gzip: 0.25 kB admin/assets/index.css 1.63 kB │ gzip: 0.73 kB admin/assets/index.js 927.28 kB │ gzip: 259.40 kB ✓ built in 3.48s [plugin builtin:vite-reporter] (!) Some chunks are larger than 900 kB after minification. Consider: - Using dynamic import() to code-split the application - Use build.rolldownOptions.output.codeSplitting to improve chunking: https://rolldown.rs/reference/OutputOptions.codeSplitting - Adjust chunk size limit for this warning via build.chunkSizeWarningLimit. > canvas@3.2.3 install > prebuild-install -r napi || node-gyp rebuild added 2 packages, and changed 16 packages in 3m 113 packages are looking for funding run `npm fund` for details upload [22] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/S5.png S5.png image/png upload [20] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/assets/index.js assets/index.js application/javascript upload [19] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [18] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [17] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [16] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [15] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [14] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [13] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [12] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [11] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [10] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [9] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/index.html index.html text/html upload [8] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/index_m.html index_m.html text/html upload [7] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/mihome-vacuum.png mihome-vacuum.png image/png upload [6] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/robot.png robot.png image/png upload [5] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/robot1.png robot1.png image/png upload [4] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/spaceship.png spaceship.png image/png upload [3] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/tank.png tank.png image/png upload [2] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/valetudo_conf.png valetudo_conf.png image/png upload [1] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/valetudo_logo_small.svg valetudo_logo_small.svg image/svg+xml upload [0] mihome-vacuum.admin /opt/iobroker/node_modules/iobroker.mihome-vacuum/admin/words.js words.js application/javascript Updating objects from io-package.json for adapter "mihome-vacuum" with version "5.3.0" thomas@testpi:~ $
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
505
Online33.0k
Benutzer83.6k
Themen1.3m
Beiträge