Komisches Verhalten: Trigger lösen unterschiedlich nicht aus
-
Guten Tag,
ich habe ein merkwürdiges Problem bei einem meiner Blockly-Scripte (Rolladenschattierung):
Kurz gesagt: von den 11 Subscriptions reagiert immer eines nicht mehr, und das wechselt, je nachdem wieviele Triggerblöcke vorhanden sind.Erst merkte ich, dass ein Trigger, der die Rolladen verfährt, nicht mehr auf die beiden Eingangsobjekte reagierte. Ein Debug-Testprint hat dies bestätigt. Ein identischer Trigger mit nur einem Testprint als Inhalt funktionierte hingegen!
Abhilfe: den defekten Trigger "deaktiviert" und neu angelegt, Ergebnis: Trigger funktioniert.
Aber: nun triggert ein komplett anderer Trigger im gleichen Blockly nicht mehr.Ich denke, es liegt nicht an den einzelnen Triggern, sondern irgendwie scheint sich in die Kette der Subscriptions ein Fehler eingeschlichen zu haben.
Deshalb die Frage:
Ist das Phänomen schon mal aufgetreten/bekannt?
Kann ich einen "Neuaufbau" erzwingen, indem ich einen Export und neuen Import des Blocklys mache?
Nein, hat keine Änderung zur FolgeZur Erläuterung ein Bild:
Zunächst existiert nur Trigger 1, der Debugoutput wird nicht ausgeführt.
Danach wird Trigger 2 angelegt, hier wird der Debugoutput ausgeführt!!!Wohlgemerkt: der Fehler ist nicht an diesen Trigger gebunden! Wenn ich einen neuen Trigger anlege, kann es sein, dass irgendein anderer Trigger im Blockly nicht mehr ausgeführt wird, aber dieser schon!
Der nicht mehr funktionierende Trigger scheint "zu wandern".
Die obigen Trigger sind übrigens schon über 1 Jahr alt, da ist nichts geändert worden!
Ansonsten sind alle Adapter/Nodes etc. auf aktuellem Stand. -
Zeig mal die Einstellungen im JavaScript Adapter als Screenshots
-
Danke und gerne:
-
Sieht ok aus.
Wie ist den die Prozessorlast / CPU Auslastung auf deinem System?
Zeigt das Ereignisprotokoll Fehler oder Warnungen?Ein
iob diaghier zu posten schadet auch nicht.
Das Problem was du hast, soll natürlich nicht sein. Entweder ist das System überlasten oder es ist etwas krumm.
Im Log kannst du auch mal schauen was kommt, wenn du den JavaScript-Adapter einmal neu startest. Der starte dann ja auch alle Skripte neu. -
Guten Tag,
ich habe ein merkwürdiges Problem bei einem meiner Blockly-Scripte (Rolladenschattierung):
Kurz gesagt: von den 11 Subscriptions reagiert immer eines nicht mehr, und das wechselt, je nachdem wieviele Triggerblöcke vorhanden sind.Erst merkte ich, dass ein Trigger, der die Rolladen verfährt, nicht mehr auf die beiden Eingangsobjekte reagierte. Ein Debug-Testprint hat dies bestätigt. Ein identischer Trigger mit nur einem Testprint als Inhalt funktionierte hingegen!
Abhilfe: den defekten Trigger "deaktiviert" und neu angelegt, Ergebnis: Trigger funktioniert.
Aber: nun triggert ein komplett anderer Trigger im gleichen Blockly nicht mehr.Ich denke, es liegt nicht an den einzelnen Triggern, sondern irgendwie scheint sich in die Kette der Subscriptions ein Fehler eingeschlichen zu haben.
Deshalb die Frage:
Ist das Phänomen schon mal aufgetreten/bekannt?
Kann ich einen "Neuaufbau" erzwingen, indem ich einen Export und neuen Import des Blocklys mache?
Nein, hat keine Änderung zur FolgeZur Erläuterung ein Bild:
Zunächst existiert nur Trigger 1, der Debugoutput wird nicht ausgeführt.
Danach wird Trigger 2 angelegt, hier wird der Debugoutput ausgeführt!!!Wohlgemerkt: der Fehler ist nicht an diesen Trigger gebunden! Wenn ich einen neuen Trigger anlege, kann es sein, dass irgendein anderer Trigger im Blockly nicht mehr ausgeführt wird, aber dieser schon!
Der nicht mehr funktionierende Trigger scheint "zu wandern".
Die obigen Trigger sind übrigens schon über 1 Jahr alt, da ist nichts geändert worden!
Ansonsten sind alle Adapter/Nodes etc. auf aktuellem Stand.@iobroker2001 [sagte]: Ist das Phänomen schon mal aufgetreten/bekannt?
Bei mir noch nicht.
Allerdings enthält die Logik unter dem Debug-Block einen Fehler:- Es wird die falsche Timeout-Variable peprüft
"stop timeoutManu" ist nicht erforderlich, denn das macht Blockly bei Ablauf des Timeout automatisch.
-
Danke für Eure Antworten! Die Daten habe ich weiter unten (1 - 4) aufgeführt, aber die bringen uns m. M. nicht weiter.
Ich habe mittlerweilse eine andere Vermutung: bei allen Triggern verwende ich als Triggerobjekte Verweise (Variablen) auf die eigentlichen Datenpunkte. Jetzt habe ich das bei dem aktuell betroffenen Trigger in den direkten Datenpunkt geändert, und siehe da, der Trigger feuert!!
So weise ich die Punkte zu:
Und wenn ich diese nicht mehr verwende, also so:
Dann funktioniert es wieder.Ist in der (internen?) Liste der Variablen eine Begrenzung? In diesem Blockly verwende ich 26 solcher Zuweisungen, da ich für andere Rolladen das Blockly kopiere und nur an der Zuweisungsstelle die Anpassung für die anderen Rolladen mache.
Wie gesagt, das besteht so seit über 2 Jahren!----------------------------- Hier die Daten von oben --------------------------------
-
Restart des Javascript-Adapters bringt keine Warnungen/Fehler, lediglich die Meldungen über erst gestoppte und dann wieder gestartete Blocklys.
-
Prozessorlast sehr entspannt:
-
Speicher:
Freier Festplattenspeicher: 46%, Gesamte RAM-Auslastung: 4205 Mb / Frei: 51% = 4090 Mb [Server: iobroker - 30 Prozesse] -
iob diag:
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.93+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 844 days ago (on 2024-03-15). Systemuptime and Load: 17:08:15 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2026-07-07 17:08:15 CEST Universal time: Tue 2026-07-07 15:08:15 UTC RTC time: Tue 2026-07-07 15:08:15 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.6G 2.0G 6.0M 2.0G 3.9G Swap: 209M 0B 209M Total: 8.7G 4.6G 2.2G Active iob-Instances: 30 8063 M total memory 4356 M used memory 4542 M active memory 1083 M inactive memory 1930 M free memory 179 M buffer memory 1690 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 17:08:16 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 Tasks: 230 total, 1 running, 229 sleeping, 0 stopped, 0 zombie %Cpu(s): 25.0 us, 0.0 sy, 0.0 ni, 50.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.0 total, 1929.9 free, 4357.2 used, 1869.5 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3705.8 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 5.7M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 16G 12G 58% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 64K 5.0M 2% /run/lock /dev/mmcblk0p1 vfat 510M 67M 444M 13% /boot/firmware //192.168.178.1/FRITZ.NAS cifs 59G 58G 342M 100% /home/pi/fritzNAS tmpfs tmpfs 807M 0 807M 0% /run/user/1000 Messages concerning filesystems in dmesg: [Fri Jul 3 18:35:22 2026] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Fri Jul 3 18:35:23 2026] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/home/pi/fritzNAS //192.168.178.1/FRITZ.NAS cifs rw,relatime,vers=3.1.1,cache=none,upcall_target=app,username=android,uid=1000,forceuid,gid=1000,forcegid,addr=192.168.178.1,file_mode=0777,dir_mode=0777,soft,nounix,mapposix,reparse=nfs,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 4.1G /var/ 2.8G /var/log/journal/41e4a03f5b7d490a97523b509aa0a614 2.8G /var/log/journal 2.8G /var/log 545M /var/lib Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 594M /opt/iobroker/iobroker-data/ 426M /opt/iobroker/iobroker-data/files 122M /opt/iobroker/iobroker-data/backup-objects 86M /opt/iobroker/iobroker-data/files/vis-2 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0 /dev/serial/by-id/usb-busware.de_CUL868-if00 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.178.75:6638 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.2.2, hostname: iobroker , alive, uptime: 340365) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.connector-local-control.0: connector-local-control: iobroker - enabled + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 system.adapter.devices.0 : devices : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.jeelink.0 : jeelink : iobroker - enabled + system.adapter.mhi-wfrac.0 : mhi-wfrac : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : iobroker - enabled system.adapter.reolink.0 : reolink : iobroker - disabled system.adapter.reolink.1 : reolink : iobroker - disabled system.adapter.reolink.2 : reolink : iobroker - disabled system.adapter.reolink.3 : reolink : iobroker - disabled system.adapter.reolink.4 : reolink : iobroker - disabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - disabled + system.adapter.vis-2.0 : vis-2 : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬──────────────────────────────────────────────┬───────────────────────────────┬──────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼──────────────────────────────────────────────┼───────────────────────────────┼──────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 2 │ 'system.adapter.connector-local-control' │ 'connector-local-control' │ '0.0.4' │ 'none' │ │ 3 │ 'system.adapter.cul' │ 'cul' │ '2.2.0' │ 'none' │ │ 4 │ 'system.adapter.devices' │ 'devices' │ '1.2.14' │ 'none' │ │ 5 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 6 │ 'system.adapter.email' │ 'email' │ '2.0.4' │ 'none' │ │ 7 │ 'system.adapter.followthesun' │ 'followthesun' │ '0.5.3' │ 'none' │ │ 8 │ 'system.adapter.fullybrowser' │ 'fullybrowser' │ '3.1.2' │ 'none' │ │ 9 │ 'system.adapter.hm-rega' │ 'hm-rega' │ '5.1.0' │ 'none' │ │ 10 │ 'system.adapter.hm-rpc' │ 'hm-rpc' │ '3.0.1' │ 'none' │ │ 11 │ 'system.adapter.icons-mfd-png' │ 'icons-mfd-png' │ '1.2.1' │ 'none' │ │ 12 │ 'system.adapter.icons-mfd-svg' │ 'icons-mfd-svg' │ '1.2.0' │ 'none' │ │ 13 │ 'system.adapter.icons-open-icon-library-png' │ 'icons-open-icon-library-png' │ '0.1.2' │ 'none' │ │ 14 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 15 │ 'system.adapter.jarvis' │ 'jarvis' │ '3.1.8' │ 'none' │ │ 16 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 17 │ 'system.adapter.jeelink' │ 'jeelink' │ '1.2.8' │ 'none' │ │ 18 │ 'system.adapter.mhi-wfrac' │ 'mhi-wfrac' │ '2.2.0' │ 'none' │ │ 19 │ 'system.adapter.mqtt' │ 'mqtt' │ '6.1.4' │ 'none' │ │ 20 │ 'system.adapter.notification-manager' │ 'notification-manager' │ '1.3.0' │ 'none' │ │ 21 │ 'system.adapter.nut' │ 'nut' │ '1.7.0' │ 'none' │ │ 22 │ 'system.adapter.onvif' │ 'onvif' │ '1.1.4' │ 'none' │ │ 23 │ 'system.adapter.ping' │ 'ping' │ '1.7.9' │ 'none' │ │ 24 │ 'system.adapter.reolink' │ 'reolink' │ '1.4.2' │ 'none' │ │ 25 │ 'system.adapter.shelly' │ 'shelly' │ '10.6.1' │ 'none' │ │ 26 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 27 │ 'system.adapter.statistics' │ 'statistics' │ '4.0.0' │ 'none' │ │ 28 │ 'system.adapter.telegram' │ 'telegram' │ '4.1.0' │ 'none' │ │ 29 │ 'system.adapter.vis-2' │ 'vis-2' │ '2.13.8' │ 'none' │ │ 30 │ 'system.adapter.vis-2-widgets-collection' │ 'vis-2-widgets-collection' │ '1.8.1' │ 'none' │ │ 31 │ 'system.adapter.vis-2-widgets-energy' │ 'vis-2-widgets-energy' │ '1.0.2' │ 'none' │ │ 32 │ 'system.adapter.vis-2-widgets-inventwo' │ 'vis-2-widgets-inventwo' │ '1.4.0' │ 'none' │ │ 33 │ 'system.adapter.vis-2-widgets-material' │ 'vis-2-widgets-material' │ '1.6.1' │ 'none' │ │ 34 │ 'system.adapter.vis-icontwo' │ 'vis-icontwo' │ '2.11.6' │ 'none' │ │ 35 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 36 │ 'system.adapter.worx' │ 'worx' │ '3.3.0' │ 'none' │ │ 37 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ │ 38 │ 'system.adapter.yr' │ 'yr' │ '5.3.0' │ 'none' │ │ 39 │ 'system.adapter.zigbee' │ 'zigbee' │ '3.3.5' │ 'none' │ └─────────┴──────────────────────────────────────────────┴───────────────────────────────┴──────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cul" : 2.2.0 , installed 2.2.0 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "followthesun" : 0.5.3 , installed 0.5.3 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Adapter "jeelink" : 1.2.8 , installed 1.2.8 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "mhi-wfrac" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "statistics" : 4.0.0 , installed 4.0.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-inventwo": 1.4.0, installed 1.4.0 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-icontwo" : 2.11.6 , installed 2.11.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 15343 States: 11906 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://apt.debmatic.de/debmatic stable InRelease Fetched 6922 B in 1s (11.6 kB/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:1900 0.0.0.0:* users:(("ssdpd",pid=1197,fd=3)) udp UNCONN 0 0 127.0.0.1:1998 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=5)) udp UNCONN 0 0 0.0.0.0:51371 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=14)) udp UNCONN 0 0 0.0.0.0:43439 0.0.0.0:* users:(("eq3configd",pid=1194,fd=3)) udp UNCONN 0 0 0.0.0.0:32101 0.0.0.0:* users:(("io.connector-lo",pid=1999,fd=35)) udp UNCONN 0 0 127.0.0.1:8182 0.0.0.0:* users:(("hss_led",pid=1230,fd=3)) udp UNCONN 0 0 0.0.0.0:33870 0.0.0.0:* users:(("rfd",pid=1316,fd=4)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=12)) udp UNCONN 0 0 *:41477 *:* users:(("avahi-daemon",pid=730,fd=15)) udp UNCONN 0 0 [fe80::c317:5c0b:7409:37de]:dhcpv6-client *:* users:(("NetworkManager",pid=833,fd=28)) udp UNCONN 0 0 *:37619 *:* users:(("java",pid=1362,fd=7)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=730,fd=13)) tcp LISTEN 0 5 0.0.0.0:31999 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=6)) tcp LISTEN 0 100 0.0.0.0:32001 0.0.0.0:* users:(("rfd",pid=1316,fd=3)) tcp LISTEN 0 1024 0.0.0.0:8181 0.0.0.0:* users:(("lighttpd",pid=1054,fd=6)) tcp LISTEN 0 24 0.0.0.0:8183 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=3)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=29)) tcp LISTEN 0 1024 127.0.0.1:30080 0.0.0.0:* users:(("lighttpd",pid=1249,fd=4)) tcp LISTEN 0 1024 0.0.0.0:9292 0.0.0.0:* users:(("lighttpd",pid=1054,fd=12)) tcp LISTEN 0 1024 0.0.0.0:1999 0.0.0.0:* users:(("lighttpd",pid=1054,fd=8)) tcp LISTEN 0 1024 0.0.0.0:cisco-sccp 0.0.0.0:* users:(("lighttpd",pid=1054,fd=16)) tcp LISTEN 0 1024 0.0.0.0:2001 0.0.0.0:* users:(("lighttpd",pid=1054,fd=14)) tcp LISTEN 0 1024 0.0.0.0:2010 0.0.0.0:* users:(("lighttpd",pid=1054,fd=10)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.mqtt.0",pid=1864,fd=30)) tcp LISTEN 0 511 0.0.0.0:1884 0.0.0.0:* users:(("io.shelly.0",pid=1932,fd=34)) tcp LISTEN 0 1024 0.0.0.0:http 0.0.0.0:* users:(("lighttpd",pid=1054,fd=5)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=893,fd=3)) tcp LISTEN 0 511 127.0.0.1:12001 0.0.0.0:* users:(("io.hm-rpc.0",pid=1829,fd=30)) tcp LISTEN 0 511 127.0.0.1:12010 0.0.0.0:* users:(("io.hm-rpc.1",pid=1847,fd=30)) tcp LISTEN 0 4096 *:32010 *:* users:(("java",pid=1362,fd=34)) tcp LISTEN 0 1024 [::]:8181 [::]:* users:(("lighttpd",pid=1054,fd=7)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1487,fd=34)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=2127,fd=29)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1022,fd=3360)) tcp LISTEN 0 511 *:8087 *:* users:(("io.ws.0",pid=2143,fd=29)) tcp LISTEN 0 4096 *:39292 *:* users:(("java",pid=1362,fd=57)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1373,fd=35)) tcp LISTEN 0 1024 [::]:9292 [::]:* users:(("lighttpd",pid=1054,fd=13)) tcp LISTEN 0 4096 *:9293 *:* users:(("java",pid=1362,fd=49)) tcp LISTEN 0 4096 *:9294 *:* users:(("java",pid=1362,fd=50)) tcp LISTEN 0 511 *:18075 *:* users:(("io.fullybrowser",pid=1779,fd=30)) tcp LISTEN 0 1024 [::]:1999 [::]:* users:(("lighttpd",pid=1054,fd=9)) tcp LISTEN 0 1024 [::]:cisco-sccp [::]:* users:(("lighttpd",pid=1054,fd=17)) tcp LISTEN 0 1024 [::]:2001 [::]:* users:(("lighttpd",pid=1054,fd=15)) tcp LISTEN 0 1024 [::]:2010 [::]:* users:(("lighttpd",pid=1054,fd=11)) tcp LISTEN 0 1024 [::]:http [::]:* users:(("lighttpd",pid=1054,fd=4)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=893,fd=4)) *** Log File - Last 25 Lines *** 2026-07-07 16:05:11.277 - warn: zigbee.0 (1983) Device '0x54ef441000782ea4' announced itself, trying to read its status 2026-07-07 16:05:11.277 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' started 2026-07-07 16:05:11.333 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:05:14.581 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:23:44.611 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.753 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.771 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.795 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.814 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.830 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.848 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.592 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.620 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:57.848 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 vis-2 2026-07-07 16:57:01.014 - info: host.iobroker instance system.adapter.yr.0 in version "5.3.0" started with pid 45958 2026-07-07 16:57:01.866 - info: yr.0 (45958) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.23.1, js-controller: 7.2.2 2026-07-07 16:57:01.874 - info: yr.0 (45958) longitude/longitude not set, get data from system 2026-07-07 16:57:01.883 - info: yr.0 (45958) system latitude: 51.2854687 longitude: 6.3590583 2026-07-07 16:57:11.166 - info: yr.0 (45958) Data updated. 2026-07-07 16:57:11.167 - info: yr.0 (45958) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-07-07 16:57:11.676 - info: host.iobroker instance system.adapter.yr.0 having pid 45958 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============= Mark until here for C&P =============
-
-
@iobroker2001 [sagte]: Ist das Phänomen schon mal aufgetreten/bekannt?
Bei mir noch nicht.
Allerdings enthält die Logik unter dem Debug-Block einen Fehler:- Es wird die falsche Timeout-Variable peprüft
"stop timeoutManu" ist nicht erforderlich, denn das macht Blockly bei Ablauf des Timeout automatisch.
@iobroker2001 [sagte]: Ist das Phänomen schon mal aufgetreten/bekannt?
Bei mir noch nicht.
Allerdings enthält die Logik unter dem Debug-Block einen Fehler:- Es wird die falsche Timeout-Variable peprüft
"stop timeoutManu" ist nicht erforderlich, denn das macht Blockly bei Ablauf des Timeout automatisch.
Hallo Paul,
hast recht, falsche Timeout-Variable, das muss beim Ex- und Import verrutscht sein. Ist korrigiert, danke!
"stop timeout" habe ich jetzt entfernt, ist jetzt ein leerer Block.
Danke!
Für alle anderen: das hat nichts mit dem eigentlichen Problem zu tun. -
Danke für Eure Antworten! Die Daten habe ich weiter unten (1 - 4) aufgeführt, aber die bringen uns m. M. nicht weiter.
Ich habe mittlerweilse eine andere Vermutung: bei allen Triggern verwende ich als Triggerobjekte Verweise (Variablen) auf die eigentlichen Datenpunkte. Jetzt habe ich das bei dem aktuell betroffenen Trigger in den direkten Datenpunkt geändert, und siehe da, der Trigger feuert!!
So weise ich die Punkte zu:
Und wenn ich diese nicht mehr verwende, also so:
Dann funktioniert es wieder.Ist in der (internen?) Liste der Variablen eine Begrenzung? In diesem Blockly verwende ich 26 solcher Zuweisungen, da ich für andere Rolladen das Blockly kopiere und nur an der Zuweisungsstelle die Anpassung für die anderen Rolladen mache.
Wie gesagt, das besteht so seit über 2 Jahren!----------------------------- Hier die Daten von oben --------------------------------
-
Restart des Javascript-Adapters bringt keine Warnungen/Fehler, lediglich die Meldungen über erst gestoppte und dann wieder gestartete Blocklys.
-
Prozessorlast sehr entspannt:
-
Speicher:
Freier Festplattenspeicher: 46%, Gesamte RAM-Auslastung: 4205 Mb / Frei: 51% = 4090 Mb [Server: iobroker - 30 Prozesse] -
iob diag:
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.93+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 844 days ago (on 2024-03-15). Systemuptime and Load: 17:08:15 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2026-07-07 17:08:15 CEST Universal time: Tue 2026-07-07 15:08:15 UTC RTC time: Tue 2026-07-07 15:08:15 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.6G 2.0G 6.0M 2.0G 3.9G Swap: 209M 0B 209M Total: 8.7G 4.6G 2.2G Active iob-Instances: 30 8063 M total memory 4356 M used memory 4542 M active memory 1083 M inactive memory 1930 M free memory 179 M buffer memory 1690 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 17:08:16 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 Tasks: 230 total, 1 running, 229 sleeping, 0 stopped, 0 zombie %Cpu(s): 25.0 us, 0.0 sy, 0.0 ni, 50.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.0 total, 1929.9 free, 4357.2 used, 1869.5 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3705.8 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 5.7M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 16G 12G 58% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 64K 5.0M 2% /run/lock /dev/mmcblk0p1 vfat 510M 67M 444M 13% /boot/firmware //192.168.178.1/FRITZ.NAS cifs 59G 58G 342M 100% /home/pi/fritzNAS tmpfs tmpfs 807M 0 807M 0% /run/user/1000 Messages concerning filesystems in dmesg: [Fri Jul 3 18:35:22 2026] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Fri Jul 3 18:35:23 2026] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/home/pi/fritzNAS //192.168.178.1/FRITZ.NAS cifs rw,relatime,vers=3.1.1,cache=none,upcall_target=app,username=android,uid=1000,forceuid,gid=1000,forcegid,addr=192.168.178.1,file_mode=0777,dir_mode=0777,soft,nounix,mapposix,reparse=nfs,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 4.1G /var/ 2.8G /var/log/journal/41e4a03f5b7d490a97523b509aa0a614 2.8G /var/log/journal 2.8G /var/log 545M /var/lib Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 594M /opt/iobroker/iobroker-data/ 426M /opt/iobroker/iobroker-data/files 122M /opt/iobroker/iobroker-data/backup-objects 86M /opt/iobroker/iobroker-data/files/vis-2 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0 /dev/serial/by-id/usb-busware.de_CUL868-if00 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.178.75:6638 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.2.2, hostname: iobroker , alive, uptime: 340365) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.connector-local-control.0: connector-local-control: iobroker - enabled + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 system.adapter.devices.0 : devices : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.jeelink.0 : jeelink : iobroker - enabled + system.adapter.mhi-wfrac.0 : mhi-wfrac : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : iobroker - enabled system.adapter.reolink.0 : reolink : iobroker - disabled system.adapter.reolink.1 : reolink : iobroker - disabled system.adapter.reolink.2 : reolink : iobroker - disabled system.adapter.reolink.3 : reolink : iobroker - disabled system.adapter.reolink.4 : reolink : iobroker - disabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - disabled + system.adapter.vis-2.0 : vis-2 : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬──────────────────────────────────────────────┬───────────────────────────────┬──────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼──────────────────────────────────────────────┼───────────────────────────────┼──────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 2 │ 'system.adapter.connector-local-control' │ 'connector-local-control' │ '0.0.4' │ 'none' │ │ 3 │ 'system.adapter.cul' │ 'cul' │ '2.2.0' │ 'none' │ │ 4 │ 'system.adapter.devices' │ 'devices' │ '1.2.14' │ 'none' │ │ 5 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 6 │ 'system.adapter.email' │ 'email' │ '2.0.4' │ 'none' │ │ 7 │ 'system.adapter.followthesun' │ 'followthesun' │ '0.5.3' │ 'none' │ │ 8 │ 'system.adapter.fullybrowser' │ 'fullybrowser' │ '3.1.2' │ 'none' │ │ 9 │ 'system.adapter.hm-rega' │ 'hm-rega' │ '5.1.0' │ 'none' │ │ 10 │ 'system.adapter.hm-rpc' │ 'hm-rpc' │ '3.0.1' │ 'none' │ │ 11 │ 'system.adapter.icons-mfd-png' │ 'icons-mfd-png' │ '1.2.1' │ 'none' │ │ 12 │ 'system.adapter.icons-mfd-svg' │ 'icons-mfd-svg' │ '1.2.0' │ 'none' │ │ 13 │ 'system.adapter.icons-open-icon-library-png' │ 'icons-open-icon-library-png' │ '0.1.2' │ 'none' │ │ 14 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 15 │ 'system.adapter.jarvis' │ 'jarvis' │ '3.1.8' │ 'none' │ │ 16 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 17 │ 'system.adapter.jeelink' │ 'jeelink' │ '1.2.8' │ 'none' │ │ 18 │ 'system.adapter.mhi-wfrac' │ 'mhi-wfrac' │ '2.2.0' │ 'none' │ │ 19 │ 'system.adapter.mqtt' │ 'mqtt' │ '6.1.4' │ 'none' │ │ 20 │ 'system.adapter.notification-manager' │ 'notification-manager' │ '1.3.0' │ 'none' │ │ 21 │ 'system.adapter.nut' │ 'nut' │ '1.7.0' │ 'none' │ │ 22 │ 'system.adapter.onvif' │ 'onvif' │ '1.1.4' │ 'none' │ │ 23 │ 'system.adapter.ping' │ 'ping' │ '1.7.9' │ 'none' │ │ 24 │ 'system.adapter.reolink' │ 'reolink' │ '1.4.2' │ 'none' │ │ 25 │ 'system.adapter.shelly' │ 'shelly' │ '10.6.1' │ 'none' │ │ 26 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 27 │ 'system.adapter.statistics' │ 'statistics' │ '4.0.0' │ 'none' │ │ 28 │ 'system.adapter.telegram' │ 'telegram' │ '4.1.0' │ 'none' │ │ 29 │ 'system.adapter.vis-2' │ 'vis-2' │ '2.13.8' │ 'none' │ │ 30 │ 'system.adapter.vis-2-widgets-collection' │ 'vis-2-widgets-collection' │ '1.8.1' │ 'none' │ │ 31 │ 'system.adapter.vis-2-widgets-energy' │ 'vis-2-widgets-energy' │ '1.0.2' │ 'none' │ │ 32 │ 'system.adapter.vis-2-widgets-inventwo' │ 'vis-2-widgets-inventwo' │ '1.4.0' │ 'none' │ │ 33 │ 'system.adapter.vis-2-widgets-material' │ 'vis-2-widgets-material' │ '1.6.1' │ 'none' │ │ 34 │ 'system.adapter.vis-icontwo' │ 'vis-icontwo' │ '2.11.6' │ 'none' │ │ 35 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 36 │ 'system.adapter.worx' │ 'worx' │ '3.3.0' │ 'none' │ │ 37 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ │ 38 │ 'system.adapter.yr' │ 'yr' │ '5.3.0' │ 'none' │ │ 39 │ 'system.adapter.zigbee' │ 'zigbee' │ '3.3.5' │ 'none' │ └─────────┴──────────────────────────────────────────────┴───────────────────────────────┴──────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cul" : 2.2.0 , installed 2.2.0 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "followthesun" : 0.5.3 , installed 0.5.3 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Adapter "jeelink" : 1.2.8 , installed 1.2.8 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "mhi-wfrac" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "statistics" : 4.0.0 , installed 4.0.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-inventwo": 1.4.0, installed 1.4.0 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-icontwo" : 2.11.6 , installed 2.11.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 15343 States: 11906 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://apt.debmatic.de/debmatic stable InRelease Fetched 6922 B in 1s (11.6 kB/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:1900 0.0.0.0:* users:(("ssdpd",pid=1197,fd=3)) udp UNCONN 0 0 127.0.0.1:1998 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=5)) udp UNCONN 0 0 0.0.0.0:51371 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=14)) udp UNCONN 0 0 0.0.0.0:43439 0.0.0.0:* users:(("eq3configd",pid=1194,fd=3)) udp UNCONN 0 0 0.0.0.0:32101 0.0.0.0:* users:(("io.connector-lo",pid=1999,fd=35)) udp UNCONN 0 0 127.0.0.1:8182 0.0.0.0:* users:(("hss_led",pid=1230,fd=3)) udp UNCONN 0 0 0.0.0.0:33870 0.0.0.0:* users:(("rfd",pid=1316,fd=4)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=12)) udp UNCONN 0 0 *:41477 *:* users:(("avahi-daemon",pid=730,fd=15)) udp UNCONN 0 0 [fe80::c317:5c0b:7409:37de]:dhcpv6-client *:* users:(("NetworkManager",pid=833,fd=28)) udp UNCONN 0 0 *:37619 *:* users:(("java",pid=1362,fd=7)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=730,fd=13)) tcp LISTEN 0 5 0.0.0.0:31999 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=6)) tcp LISTEN 0 100 0.0.0.0:32001 0.0.0.0:* users:(("rfd",pid=1316,fd=3)) tcp LISTEN 0 1024 0.0.0.0:8181 0.0.0.0:* users:(("lighttpd",pid=1054,fd=6)) tcp LISTEN 0 24 0.0.0.0:8183 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=3)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=29)) tcp LISTEN 0 1024 127.0.0.1:30080 0.0.0.0:* users:(("lighttpd",pid=1249,fd=4)) tcp LISTEN 0 1024 0.0.0.0:9292 0.0.0.0:* users:(("lighttpd",pid=1054,fd=12)) tcp LISTEN 0 1024 0.0.0.0:1999 0.0.0.0:* users:(("lighttpd",pid=1054,fd=8)) tcp LISTEN 0 1024 0.0.0.0:cisco-sccp 0.0.0.0:* users:(("lighttpd",pid=1054,fd=16)) tcp LISTEN 0 1024 0.0.0.0:2001 0.0.0.0:* users:(("lighttpd",pid=1054,fd=14)) tcp LISTEN 0 1024 0.0.0.0:2010 0.0.0.0:* users:(("lighttpd",pid=1054,fd=10)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.mqtt.0",pid=1864,fd=30)) tcp LISTEN 0 511 0.0.0.0:1884 0.0.0.0:* users:(("io.shelly.0",pid=1932,fd=34)) tcp LISTEN 0 1024 0.0.0.0:http 0.0.0.0:* users:(("lighttpd",pid=1054,fd=5)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=893,fd=3)) tcp LISTEN 0 511 127.0.0.1:12001 0.0.0.0:* users:(("io.hm-rpc.0",pid=1829,fd=30)) tcp LISTEN 0 511 127.0.0.1:12010 0.0.0.0:* users:(("io.hm-rpc.1",pid=1847,fd=30)) tcp LISTEN 0 4096 *:32010 *:* users:(("java",pid=1362,fd=34)) tcp LISTEN 0 1024 [::]:8181 [::]:* users:(("lighttpd",pid=1054,fd=7)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1487,fd=34)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=2127,fd=29)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1022,fd=3360)) tcp LISTEN 0 511 *:8087 *:* users:(("io.ws.0",pid=2143,fd=29)) tcp LISTEN 0 4096 *:39292 *:* users:(("java",pid=1362,fd=57)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1373,fd=35)) tcp LISTEN 0 1024 [::]:9292 [::]:* users:(("lighttpd",pid=1054,fd=13)) tcp LISTEN 0 4096 *:9293 *:* users:(("java",pid=1362,fd=49)) tcp LISTEN 0 4096 *:9294 *:* users:(("java",pid=1362,fd=50)) tcp LISTEN 0 511 *:18075 *:* users:(("io.fullybrowser",pid=1779,fd=30)) tcp LISTEN 0 1024 [::]:1999 [::]:* users:(("lighttpd",pid=1054,fd=9)) tcp LISTEN 0 1024 [::]:cisco-sccp [::]:* users:(("lighttpd",pid=1054,fd=17)) tcp LISTEN 0 1024 [::]:2001 [::]:* users:(("lighttpd",pid=1054,fd=15)) tcp LISTEN 0 1024 [::]:2010 [::]:* users:(("lighttpd",pid=1054,fd=11)) tcp LISTEN 0 1024 [::]:http [::]:* users:(("lighttpd",pid=1054,fd=4)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=893,fd=4)) *** Log File - Last 25 Lines *** 2026-07-07 16:05:11.277 - warn: zigbee.0 (1983) Device '0x54ef441000782ea4' announced itself, trying to read its status 2026-07-07 16:05:11.277 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' started 2026-07-07 16:05:11.333 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:05:14.581 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:23:44.611 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.753 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.771 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.795 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.814 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.830 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.848 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.592 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.620 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:57.848 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 vis-2 2026-07-07 16:57:01.014 - info: host.iobroker instance system.adapter.yr.0 in version "5.3.0" started with pid 45958 2026-07-07 16:57:01.866 - info: yr.0 (45958) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.23.1, js-controller: 7.2.2 2026-07-07 16:57:01.874 - info: yr.0 (45958) longitude/longitude not set, get data from system 2026-07-07 16:57:01.883 - info: yr.0 (45958) system latitude: 51.2854687 longitude: 6.3590583 2026-07-07 16:57:11.166 - info: yr.0 (45958) Data updated. 2026-07-07 16:57:11.167 - info: yr.0 (45958) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-07-07 16:57:11.676 - info: host.iobroker instance system.adapter.yr.0 having pid 45958 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============= Mark until here for C&P =============
@iobroker2001 [sagte]: So weise ich die Punkte zu:
Nur eine Vermutung: Enthält die ID des DP "PositionKücheRechts" einen Umlaut?
@iobroker2001 sagte:
das muss beim Ex- und Import verrutscht sein.Ja, die Timer-Variablen werden beim Import regelmäßig durcheinander gebracht und müssen anschließend korrigiert werden.
-
-
Danke für Eure Antworten! Die Daten habe ich weiter unten (1 - 4) aufgeführt, aber die bringen uns m. M. nicht weiter.
Ich habe mittlerweilse eine andere Vermutung: bei allen Triggern verwende ich als Triggerobjekte Verweise (Variablen) auf die eigentlichen Datenpunkte. Jetzt habe ich das bei dem aktuell betroffenen Trigger in den direkten Datenpunkt geändert, und siehe da, der Trigger feuert!!
So weise ich die Punkte zu:
Und wenn ich diese nicht mehr verwende, also so:
Dann funktioniert es wieder.Ist in der (internen?) Liste der Variablen eine Begrenzung? In diesem Blockly verwende ich 26 solcher Zuweisungen, da ich für andere Rolladen das Blockly kopiere und nur an der Zuweisungsstelle die Anpassung für die anderen Rolladen mache.
Wie gesagt, das besteht so seit über 2 Jahren!----------------------------- Hier die Daten von oben --------------------------------
-
Restart des Javascript-Adapters bringt keine Warnungen/Fehler, lediglich die Meldungen über erst gestoppte und dann wieder gestartete Blocklys.
-
Prozessorlast sehr entspannt:
-
Speicher:
Freier Festplattenspeicher: 46%, Gesamte RAM-Auslastung: 4205 Mb / Frei: 51% = 4090 Mb [Server: iobroker - 30 Prozesse] -
iob diag:
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.93+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 844 days ago (on 2024-03-15). Systemuptime and Load: 17:08:15 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2026-07-07 17:08:15 CEST Universal time: Tue 2026-07-07 15:08:15 UTC RTC time: Tue 2026-07-07 15:08:15 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.6G 2.0G 6.0M 2.0G 3.9G Swap: 209M 0B 209M Total: 8.7G 4.6G 2.2G Active iob-Instances: 30 8063 M total memory 4356 M used memory 4542 M active memory 1083 M inactive memory 1930 M free memory 179 M buffer memory 1690 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 17:08:16 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 Tasks: 230 total, 1 running, 229 sleeping, 0 stopped, 0 zombie %Cpu(s): 25.0 us, 0.0 sy, 0.0 ni, 50.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.0 total, 1929.9 free, 4357.2 used, 1869.5 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3705.8 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 5.7M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 16G 12G 58% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 64K 5.0M 2% /run/lock /dev/mmcblk0p1 vfat 510M 67M 444M 13% /boot/firmware //192.168.178.1/FRITZ.NAS cifs 59G 58G 342M 100% /home/pi/fritzNAS tmpfs tmpfs 807M 0 807M 0% /run/user/1000 Messages concerning filesystems in dmesg: [Fri Jul 3 18:35:22 2026] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Fri Jul 3 18:35:23 2026] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/home/pi/fritzNAS //192.168.178.1/FRITZ.NAS cifs rw,relatime,vers=3.1.1,cache=none,upcall_target=app,username=android,uid=1000,forceuid,gid=1000,forcegid,addr=192.168.178.1,file_mode=0777,dir_mode=0777,soft,nounix,mapposix,reparse=nfs,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 4.1G /var/ 2.8G /var/log/journal/41e4a03f5b7d490a97523b509aa0a614 2.8G /var/log/journal 2.8G /var/log 545M /var/lib Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 594M /opt/iobroker/iobroker-data/ 426M /opt/iobroker/iobroker-data/files 122M /opt/iobroker/iobroker-data/backup-objects 86M /opt/iobroker/iobroker-data/files/vis-2 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0 /dev/serial/by-id/usb-busware.de_CUL868-if00 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.178.75:6638 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.2.2, hostname: iobroker , alive, uptime: 340365) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.connector-local-control.0: connector-local-control: iobroker - enabled + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 system.adapter.devices.0 : devices : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.jeelink.0 : jeelink : iobroker - enabled + system.adapter.mhi-wfrac.0 : mhi-wfrac : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : iobroker - enabled system.adapter.reolink.0 : reolink : iobroker - disabled system.adapter.reolink.1 : reolink : iobroker - disabled system.adapter.reolink.2 : reolink : iobroker - disabled system.adapter.reolink.3 : reolink : iobroker - disabled system.adapter.reolink.4 : reolink : iobroker - disabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - disabled + system.adapter.vis-2.0 : vis-2 : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬──────────────────────────────────────────────┬───────────────────────────────┬──────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼──────────────────────────────────────────────┼───────────────────────────────┼──────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 2 │ 'system.adapter.connector-local-control' │ 'connector-local-control' │ '0.0.4' │ 'none' │ │ 3 │ 'system.adapter.cul' │ 'cul' │ '2.2.0' │ 'none' │ │ 4 │ 'system.adapter.devices' │ 'devices' │ '1.2.14' │ 'none' │ │ 5 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 6 │ 'system.adapter.email' │ 'email' │ '2.0.4' │ 'none' │ │ 7 │ 'system.adapter.followthesun' │ 'followthesun' │ '0.5.3' │ 'none' │ │ 8 │ 'system.adapter.fullybrowser' │ 'fullybrowser' │ '3.1.2' │ 'none' │ │ 9 │ 'system.adapter.hm-rega' │ 'hm-rega' │ '5.1.0' │ 'none' │ │ 10 │ 'system.adapter.hm-rpc' │ 'hm-rpc' │ '3.0.1' │ 'none' │ │ 11 │ 'system.adapter.icons-mfd-png' │ 'icons-mfd-png' │ '1.2.1' │ 'none' │ │ 12 │ 'system.adapter.icons-mfd-svg' │ 'icons-mfd-svg' │ '1.2.0' │ 'none' │ │ 13 │ 'system.adapter.icons-open-icon-library-png' │ 'icons-open-icon-library-png' │ '0.1.2' │ 'none' │ │ 14 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 15 │ 'system.adapter.jarvis' │ 'jarvis' │ '3.1.8' │ 'none' │ │ 16 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 17 │ 'system.adapter.jeelink' │ 'jeelink' │ '1.2.8' │ 'none' │ │ 18 │ 'system.adapter.mhi-wfrac' │ 'mhi-wfrac' │ '2.2.0' │ 'none' │ │ 19 │ 'system.adapter.mqtt' │ 'mqtt' │ '6.1.4' │ 'none' │ │ 20 │ 'system.adapter.notification-manager' │ 'notification-manager' │ '1.3.0' │ 'none' │ │ 21 │ 'system.adapter.nut' │ 'nut' │ '1.7.0' │ 'none' │ │ 22 │ 'system.adapter.onvif' │ 'onvif' │ '1.1.4' │ 'none' │ │ 23 │ 'system.adapter.ping' │ 'ping' │ '1.7.9' │ 'none' │ │ 24 │ 'system.adapter.reolink' │ 'reolink' │ '1.4.2' │ 'none' │ │ 25 │ 'system.adapter.shelly' │ 'shelly' │ '10.6.1' │ 'none' │ │ 26 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 27 │ 'system.adapter.statistics' │ 'statistics' │ '4.0.0' │ 'none' │ │ 28 │ 'system.adapter.telegram' │ 'telegram' │ '4.1.0' │ 'none' │ │ 29 │ 'system.adapter.vis-2' │ 'vis-2' │ '2.13.8' │ 'none' │ │ 30 │ 'system.adapter.vis-2-widgets-collection' │ 'vis-2-widgets-collection' │ '1.8.1' │ 'none' │ │ 31 │ 'system.adapter.vis-2-widgets-energy' │ 'vis-2-widgets-energy' │ '1.0.2' │ 'none' │ │ 32 │ 'system.adapter.vis-2-widgets-inventwo' │ 'vis-2-widgets-inventwo' │ '1.4.0' │ 'none' │ │ 33 │ 'system.adapter.vis-2-widgets-material' │ 'vis-2-widgets-material' │ '1.6.1' │ 'none' │ │ 34 │ 'system.adapter.vis-icontwo' │ 'vis-icontwo' │ '2.11.6' │ 'none' │ │ 35 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 36 │ 'system.adapter.worx' │ 'worx' │ '3.3.0' │ 'none' │ │ 37 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ │ 38 │ 'system.adapter.yr' │ 'yr' │ '5.3.0' │ 'none' │ │ 39 │ 'system.adapter.zigbee' │ 'zigbee' │ '3.3.5' │ 'none' │ └─────────┴──────────────────────────────────────────────┴───────────────────────────────┴──────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cul" : 2.2.0 , installed 2.2.0 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "followthesun" : 0.5.3 , installed 0.5.3 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Adapter "jeelink" : 1.2.8 , installed 1.2.8 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "mhi-wfrac" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "statistics" : 4.0.0 , installed 4.0.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-inventwo": 1.4.0, installed 1.4.0 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-icontwo" : 2.11.6 , installed 2.11.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 15343 States: 11906 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://apt.debmatic.de/debmatic stable InRelease Fetched 6922 B in 1s (11.6 kB/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:1900 0.0.0.0:* users:(("ssdpd",pid=1197,fd=3)) udp UNCONN 0 0 127.0.0.1:1998 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=5)) udp UNCONN 0 0 0.0.0.0:51371 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=14)) udp UNCONN 0 0 0.0.0.0:43439 0.0.0.0:* users:(("eq3configd",pid=1194,fd=3)) udp UNCONN 0 0 0.0.0.0:32101 0.0.0.0:* users:(("io.connector-lo",pid=1999,fd=35)) udp UNCONN 0 0 127.0.0.1:8182 0.0.0.0:* users:(("hss_led",pid=1230,fd=3)) udp UNCONN 0 0 0.0.0.0:33870 0.0.0.0:* users:(("rfd",pid=1316,fd=4)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=12)) udp UNCONN 0 0 *:41477 *:* users:(("avahi-daemon",pid=730,fd=15)) udp UNCONN 0 0 [fe80::c317:5c0b:7409:37de]:dhcpv6-client *:* users:(("NetworkManager",pid=833,fd=28)) udp UNCONN 0 0 *:37619 *:* users:(("java",pid=1362,fd=7)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=730,fd=13)) tcp LISTEN 0 5 0.0.0.0:31999 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=6)) tcp LISTEN 0 100 0.0.0.0:32001 0.0.0.0:* users:(("rfd",pid=1316,fd=3)) tcp LISTEN 0 1024 0.0.0.0:8181 0.0.0.0:* users:(("lighttpd",pid=1054,fd=6)) tcp LISTEN 0 24 0.0.0.0:8183 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=3)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=29)) tcp LISTEN 0 1024 127.0.0.1:30080 0.0.0.0:* users:(("lighttpd",pid=1249,fd=4)) tcp LISTEN 0 1024 0.0.0.0:9292 0.0.0.0:* users:(("lighttpd",pid=1054,fd=12)) tcp LISTEN 0 1024 0.0.0.0:1999 0.0.0.0:* users:(("lighttpd",pid=1054,fd=8)) tcp LISTEN 0 1024 0.0.0.0:cisco-sccp 0.0.0.0:* users:(("lighttpd",pid=1054,fd=16)) tcp LISTEN 0 1024 0.0.0.0:2001 0.0.0.0:* users:(("lighttpd",pid=1054,fd=14)) tcp LISTEN 0 1024 0.0.0.0:2010 0.0.0.0:* users:(("lighttpd",pid=1054,fd=10)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.mqtt.0",pid=1864,fd=30)) tcp LISTEN 0 511 0.0.0.0:1884 0.0.0.0:* users:(("io.shelly.0",pid=1932,fd=34)) tcp LISTEN 0 1024 0.0.0.0:http 0.0.0.0:* users:(("lighttpd",pid=1054,fd=5)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=893,fd=3)) tcp LISTEN 0 511 127.0.0.1:12001 0.0.0.0:* users:(("io.hm-rpc.0",pid=1829,fd=30)) tcp LISTEN 0 511 127.0.0.1:12010 0.0.0.0:* users:(("io.hm-rpc.1",pid=1847,fd=30)) tcp LISTEN 0 4096 *:32010 *:* users:(("java",pid=1362,fd=34)) tcp LISTEN 0 1024 [::]:8181 [::]:* users:(("lighttpd",pid=1054,fd=7)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1487,fd=34)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=2127,fd=29)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1022,fd=3360)) tcp LISTEN 0 511 *:8087 *:* users:(("io.ws.0",pid=2143,fd=29)) tcp LISTEN 0 4096 *:39292 *:* users:(("java",pid=1362,fd=57)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1373,fd=35)) tcp LISTEN 0 1024 [::]:9292 [::]:* users:(("lighttpd",pid=1054,fd=13)) tcp LISTEN 0 4096 *:9293 *:* users:(("java",pid=1362,fd=49)) tcp LISTEN 0 4096 *:9294 *:* users:(("java",pid=1362,fd=50)) tcp LISTEN 0 511 *:18075 *:* users:(("io.fullybrowser",pid=1779,fd=30)) tcp LISTEN 0 1024 [::]:1999 [::]:* users:(("lighttpd",pid=1054,fd=9)) tcp LISTEN 0 1024 [::]:cisco-sccp [::]:* users:(("lighttpd",pid=1054,fd=17)) tcp LISTEN 0 1024 [::]:2001 [::]:* users:(("lighttpd",pid=1054,fd=15)) tcp LISTEN 0 1024 [::]:2010 [::]:* users:(("lighttpd",pid=1054,fd=11)) tcp LISTEN 0 1024 [::]:http [::]:* users:(("lighttpd",pid=1054,fd=4)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=893,fd=4)) *** Log File - Last 25 Lines *** 2026-07-07 16:05:11.277 - warn: zigbee.0 (1983) Device '0x54ef441000782ea4' announced itself, trying to read its status 2026-07-07 16:05:11.277 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' started 2026-07-07 16:05:11.333 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:05:14.581 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:23:44.611 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.753 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.771 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.795 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.814 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.830 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.848 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.592 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.620 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:57.848 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 vis-2 2026-07-07 16:57:01.014 - info: host.iobroker instance system.adapter.yr.0 in version "5.3.0" started with pid 45958 2026-07-07 16:57:01.866 - info: yr.0 (45958) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.23.1, js-controller: 7.2.2 2026-07-07 16:57:01.874 - info: yr.0 (45958) longitude/longitude not set, get data from system 2026-07-07 16:57:01.883 - info: yr.0 (45958) system latitude: 51.2854687 longitude: 6.3590583 2026-07-07 16:57:11.166 - info: yr.0 (45958) Data updated. 2026-07-07 16:57:11.167 - info: yr.0 (45958) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-07-07 16:57:11.676 - info: host.iobroker instance system.adapter.yr.0 having pid 45958 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============= Mark until here for C&P =============
Debian GNU/Linux 12 (bookworm)
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!
Bookworm ist ein Auslaufsystem. Ein Update auf Debian 12 'trixie' oder gleich eine Neuinstallation ist sehr anzuraten. Gruß, Fuzzy
-
-
@iobroker2001 [sagte]: So weise ich die Punkte zu:
Nur eine Vermutung: Enthält die ID des DP "PositionKücheRechts" einen Umlaut?
@iobroker2001 sagte:
das muss beim Ex- und Import verrutscht sein.Ja, die Timer-Variablen werden beim Import regelmäßig durcheinander gebracht und müssen anschließend korrigiert werden.
Nur eine Vermutung: Enthält die ID des DP "PositionKücheRechts" einen Umlaut?
Nein, die ID dazu ist von Shelly vorgegeben und heißt nur "Position", "PositionKücheRechts" ist nur der vergebene Name.
Ja, die Timer-Variablen werden beim Import regelmäßig durcheinander gebracht und müssen anschließend korrigiert werden.
Ist korrigiert.
Bookworm ist ein Auslaufsystem. Ein Update auf Debian 12 'trixie' oder gleich eine Neuinstallation ist sehr anzuraten. Gruß, Fuzzy
Danke, Fuzzy, ich hatte noch gewartet, da die Debmatic-Komponenten (noch) nicht für Trixie fertig waren, kenne den aktuellen Stand aber nicht.
-
Danke für Eure Antworten! Die Daten habe ich weiter unten (1 - 4) aufgeführt, aber die bringen uns m. M. nicht weiter.
Ich habe mittlerweilse eine andere Vermutung: bei allen Triggern verwende ich als Triggerobjekte Verweise (Variablen) auf die eigentlichen Datenpunkte. Jetzt habe ich das bei dem aktuell betroffenen Trigger in den direkten Datenpunkt geändert, und siehe da, der Trigger feuert!!
So weise ich die Punkte zu:
Und wenn ich diese nicht mehr verwende, also so:
Dann funktioniert es wieder.Ist in der (internen?) Liste der Variablen eine Begrenzung? In diesem Blockly verwende ich 26 solcher Zuweisungen, da ich für andere Rolladen das Blockly kopiere und nur an der Zuweisungsstelle die Anpassung für die anderen Rolladen mache.
Wie gesagt, das besteht so seit über 2 Jahren!----------------------------- Hier die Daten von oben --------------------------------
-
Restart des Javascript-Adapters bringt keine Warnungen/Fehler, lediglich die Meldungen über erst gestoppte und dann wieder gestartete Blocklys.
-
Prozessorlast sehr entspannt:
-
Speicher:
Freier Festplattenspeicher: 46%, Gesamte RAM-Auslastung: 4205 Mb / Frei: 51% = 4090 Mb [Server: iobroker - 30 Prozesse] -
iob diag:
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.93+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 844 days ago (on 2024-03-15). Systemuptime and Load: 17:08:15 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 CPU threads : 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Tue 2026-07-07 17:08:15 CEST Universal time: Tue 2026-07-07 15:08:15 UTC RTC time: Tue 2026-07-07 15:08:15 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 4.6G 2.0G 6.0M 2.0G 3.9G Swap: 209M 0B 209M Total: 8.7G 4.6G 2.2G Active iob-Instances: 30 8063 M total memory 4356 M used memory 4542 M active memory 1083 M inactive memory 1930 M free memory 179 M buffer memory 1690 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 17:08:16 up 3 days, 22:32, 2 users, load average: 0.10, 0.07, 0.09 Tasks: 230 total, 1 running, 229 sleeping, 0 stopped, 0 zombie %Cpu(s): 25.0 us, 0.0 sy, 0.0 ni, 50.0 id, 25.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.0 total, 1929.9 free, 4357.2 used, 1869.5 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3705.8 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 1.6G 5.7M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 16G 12G 58% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 64K 5.0M 2% /run/lock /dev/mmcblk0p1 vfat 510M 67M 444M 13% /boot/firmware //192.168.178.1/FRITZ.NAS cifs 59G 58G 342M 100% /home/pi/fritzNAS tmpfs tmpfs 807M 0 807M 0% /run/user/1000 Messages concerning filesystems in dmesg: [Fri Jul 3 18:35:22 2026] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Fri Jul 3 18:35:23 2026] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro `-/home/pi/fritzNAS //192.168.178.1/FRITZ.NAS cifs rw,relatime,vers=3.1.1,cache=none,upcall_target=app,username=android,uid=1000,forceuid,gid=1000,forcegid,addr=192.168.178.1,file_mode=0777,dir_mode=0777,soft,nounix,mapposix,reparse=nfs,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1 Files in neuralgic directories: /var: 4.1G /var/ 2.8G /var/log/journal/41e4a03f5b7d490a97523b509aa0a614 2.8G /var/log/journal 2.8G /var/log 545M /var/lib Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 594M /opt/iobroker/iobroker-data/ 426M /opt/iobroker/iobroker-data/files 122M /opt/iobroker/iobroker-data/backup-objects 86M /opt/iobroker/iobroker-data/files/vis-2 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/states.jsonl 11M /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI04PGZY-if00-port0 /dev/serial/by-id/usb-busware.de_CUL868-if00 *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.178.75:6638 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u2 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.2.2, hostname: iobroker , alive, uptime: 340365) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 1 +-- iobroker.connector-local-control@0.0.4 (git+ssh://git@github.com/ConnectorGit/ioBroker.connector-local-control.git#af6ca3a95371ad333ec5e967fa33ce251bb87ad3) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.connector-local-control.0: connector-local-control: iobroker - enabled + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 system.adapter.devices.0 : devices : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.followthesun.0 : followthesun : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - disabled + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.jeelink.0 : jeelink : iobroker - enabled + system.adapter.mhi-wfrac.0 : mhi-wfrac : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nut.0 : nut : iobroker - enabled + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : iobroker - enabled system.adapter.reolink.0 : reolink : iobroker - disabled system.adapter.reolink.1 : reolink : iobroker - disabled system.adapter.reolink.2 : reolink : iobroker - disabled system.adapter.reolink.3 : reolink : iobroker - disabled system.adapter.reolink.4 : reolink : iobroker - disabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: iobroker - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - disabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: iobroker - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - disabled + system.adapter.vis-2.0 : vis-2 : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : iobroker - enabled + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.cul.0 : cul : iobroker - enabled, port: 23 + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : iobroker - enabled, port: 8086 + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : iobroker - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.178.75:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────┬──────────────────────────────────────────────┬───────────────────────────────┬──────────┬────────────────┐ │ (index) │ id │ name │ version │ upgrade policy │ ├─────────┼──────────────────────────────────────────────┼───────────────────────────────┼──────────┼────────────────┤ │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 2 │ 'system.adapter.connector-local-control' │ 'connector-local-control' │ '0.0.4' │ 'none' │ │ 3 │ 'system.adapter.cul' │ 'cul' │ '2.2.0' │ 'none' │ │ 4 │ 'system.adapter.devices' │ 'devices' │ '1.2.14' │ 'none' │ │ 5 │ 'system.adapter.echarts' │ 'echarts' │ '3.1.0' │ 'none' │ │ 6 │ 'system.adapter.email' │ 'email' │ '2.0.4' │ 'none' │ │ 7 │ 'system.adapter.followthesun' │ 'followthesun' │ '0.5.3' │ 'none' │ │ 8 │ 'system.adapter.fullybrowser' │ 'fullybrowser' │ '3.1.2' │ 'none' │ │ 9 │ 'system.adapter.hm-rega' │ 'hm-rega' │ '5.1.0' │ 'none' │ │ 10 │ 'system.adapter.hm-rpc' │ 'hm-rpc' │ '3.0.1' │ 'none' │ │ 11 │ 'system.adapter.icons-mfd-png' │ 'icons-mfd-png' │ '1.2.1' │ 'none' │ │ 12 │ 'system.adapter.icons-mfd-svg' │ 'icons-mfd-svg' │ '1.2.0' │ 'none' │ │ 13 │ 'system.adapter.icons-open-icon-library-png' │ 'icons-open-icon-library-png' │ '0.1.2' │ 'none' │ │ 14 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 15 │ 'system.adapter.jarvis' │ 'jarvis' │ '3.1.8' │ 'none' │ │ 16 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 17 │ 'system.adapter.jeelink' │ 'jeelink' │ '1.2.8' │ 'none' │ │ 18 │ 'system.adapter.mhi-wfrac' │ 'mhi-wfrac' │ '2.2.0' │ 'none' │ │ 19 │ 'system.adapter.mqtt' │ 'mqtt' │ '6.1.4' │ 'none' │ │ 20 │ 'system.adapter.notification-manager' │ 'notification-manager' │ '1.3.0' │ 'none' │ │ 21 │ 'system.adapter.nut' │ 'nut' │ '1.7.0' │ 'none' │ │ 22 │ 'system.adapter.onvif' │ 'onvif' │ '1.1.4' │ 'none' │ │ 23 │ 'system.adapter.ping' │ 'ping' │ '1.7.9' │ 'none' │ │ 24 │ 'system.adapter.reolink' │ 'reolink' │ '1.4.2' │ 'none' │ │ 25 │ 'system.adapter.shelly' │ 'shelly' │ '10.6.1' │ 'none' │ │ 26 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 27 │ 'system.adapter.statistics' │ 'statistics' │ '4.0.0' │ 'none' │ │ 28 │ 'system.adapter.telegram' │ 'telegram' │ '4.1.0' │ 'none' │ │ 29 │ 'system.adapter.vis-2' │ 'vis-2' │ '2.13.8' │ 'none' │ │ 30 │ 'system.adapter.vis-2-widgets-collection' │ 'vis-2-widgets-collection' │ '1.8.1' │ 'none' │ │ 31 │ 'system.adapter.vis-2-widgets-energy' │ 'vis-2-widgets-energy' │ '1.0.2' │ 'none' │ │ 32 │ 'system.adapter.vis-2-widgets-inventwo' │ 'vis-2-widgets-inventwo' │ '1.4.0' │ 'none' │ │ 33 │ 'system.adapter.vis-2-widgets-material' │ 'vis-2-widgets-material' │ '1.6.1' │ 'none' │ │ 34 │ 'system.adapter.vis-icontwo' │ 'vis-icontwo' │ '2.11.6' │ 'none' │ │ 35 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 36 │ 'system.adapter.worx' │ 'worx' │ '3.3.0' │ 'none' │ │ 37 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ │ 38 │ 'system.adapter.yr' │ 'yr' │ '5.3.0' │ 'none' │ │ 39 │ 'system.adapter.zigbee' │ 'zigbee' │ '3.3.5' │ 'none' │ └─────────┴──────────────────────────────────────────────┴───────────────────────────────┴──────────┴────────────────┘ ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cul" : 2.2.0 , installed 2.2.0 Adapter "devices" : 1.2.14 , installed 1.2.14 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "followthesun" : 0.5.3 , installed 0.5.3 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.1 , installed 3.0.1 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Adapter "jeelink" : 1.2.8 , installed 1.2.8 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "mhi-wfrac" : 2.2.0 , installed 2.2.0 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nut" : 1.7.0 , installed 1.7.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.7.9 , installed 1.7.9 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "statistics" : 4.0.0 , installed 4.0.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "vis-2" : 2.13.8 , installed 2.13.8 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-inventwo": 1.4.0, installed 1.4.0 Adapter "vis-2-widgets-material": 1.6.1, installed 1.6.1 Adapter "vis-icontwo" : 2.11.6 , installed 2.11.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 15343 States: 11906 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:7 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:8 https://apt.debmatic.de/debmatic stable InRelease Fetched 6922 B in 1s (11.6 kB/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:1900 0.0.0.0:* users:(("ssdpd",pid=1197,fd=3)) udp UNCONN 0 0 127.0.0.1:1998 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=5)) udp UNCONN 0 0 0.0.0.0:51371 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=14)) udp UNCONN 0 0 0.0.0.0:43439 0.0.0.0:* users:(("eq3configd",pid=1194,fd=3)) udp UNCONN 0 0 0.0.0.0:32101 0.0.0.0:* users:(("io.connector-lo",pid=1999,fd=35)) udp UNCONN 0 0 127.0.0.1:8182 0.0.0.0:* users:(("hss_led",pid=1230,fd=3)) udp UNCONN 0 0 0.0.0.0:33870 0.0.0.0:* users:(("rfd",pid=1316,fd=4)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=730,fd=12)) udp UNCONN 0 0 *:41477 *:* users:(("avahi-daemon",pid=730,fd=15)) udp UNCONN 0 0 [fe80::c317:5c0b:7409:37de]:dhcpv6-client *:* users:(("NetworkManager",pid=833,fd=28)) udp UNCONN 0 0 *:37619 *:* users:(("java",pid=1362,fd=7)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=730,fd=13)) tcp LISTEN 0 5 0.0.0.0:31999 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=6)) tcp LISTEN 0 100 0.0.0.0:32001 0.0.0.0:* users:(("rfd",pid=1316,fd=3)) tcp LISTEN 0 1024 0.0.0.0:8181 0.0.0.0:* users:(("lighttpd",pid=1054,fd=6)) tcp LISTEN 0 24 0.0.0.0:8183 0.0.0.0:* users:(("ReGaHss.normal",pid=1627,fd=3)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1374,fd=29)) tcp LISTEN 0 1024 127.0.0.1:30080 0.0.0.0:* users:(("lighttpd",pid=1249,fd=4)) tcp LISTEN 0 1024 0.0.0.0:9292 0.0.0.0:* users:(("lighttpd",pid=1054,fd=12)) tcp LISTEN 0 1024 0.0.0.0:1999 0.0.0.0:* users:(("lighttpd",pid=1054,fd=8)) tcp LISTEN 0 1024 0.0.0.0:cisco-sccp 0.0.0.0:* users:(("lighttpd",pid=1054,fd=16)) tcp LISTEN 0 1024 0.0.0.0:2001 0.0.0.0:* users:(("lighttpd",pid=1054,fd=14)) tcp LISTEN 0 1024 0.0.0.0:2010 0.0.0.0:* users:(("lighttpd",pid=1054,fd=10)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.mqtt.0",pid=1864,fd=30)) tcp LISTEN 0 511 0.0.0.0:1884 0.0.0.0:* users:(("io.shelly.0",pid=1932,fd=34)) tcp LISTEN 0 1024 0.0.0.0:http 0.0.0.0:* users:(("lighttpd",pid=1054,fd=5)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=893,fd=3)) tcp LISTEN 0 511 127.0.0.1:12001 0.0.0.0:* users:(("io.hm-rpc.0",pid=1829,fd=30)) tcp LISTEN 0 511 127.0.0.1:12010 0.0.0.0:* users:(("io.hm-rpc.1",pid=1847,fd=30)) tcp LISTEN 0 4096 *:32010 *:* users:(("java",pid=1362,fd=34)) tcp LISTEN 0 1024 [::]:8181 [::]:* users:(("lighttpd",pid=1054,fd=7)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1487,fd=34)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=2127,fd=29)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1022,fd=3360)) tcp LISTEN 0 511 *:8087 *:* users:(("io.ws.0",pid=2143,fd=29)) tcp LISTEN 0 4096 *:39292 *:* users:(("java",pid=1362,fd=57)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1373,fd=35)) tcp LISTEN 0 1024 [::]:9292 [::]:* users:(("lighttpd",pid=1054,fd=13)) tcp LISTEN 0 4096 *:9293 *:* users:(("java",pid=1362,fd=49)) tcp LISTEN 0 4096 *:9294 *:* users:(("java",pid=1362,fd=50)) tcp LISTEN 0 511 *:18075 *:* users:(("io.fullybrowser",pid=1779,fd=30)) tcp LISTEN 0 1024 [::]:1999 [::]:* users:(("lighttpd",pid=1054,fd=9)) tcp LISTEN 0 1024 [::]:cisco-sccp [::]:* users:(("lighttpd",pid=1054,fd=17)) tcp LISTEN 0 1024 [::]:2001 [::]:* users:(("lighttpd",pid=1054,fd=15)) tcp LISTEN 0 1024 [::]:2010 [::]:* users:(("lighttpd",pid=1054,fd=11)) tcp LISTEN 0 1024 [::]:http [::]:* users:(("lighttpd",pid=1054,fd=4)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=893,fd=4)) *** Log File - Last 25 Lines *** 2026-07-07 16:05:11.277 - warn: zigbee.0 (1983) Device '0x54ef441000782ea4' announced itself, trying to read its status 2026-07-07 16:05:11.277 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' started 2026-07-07 16:05:11.333 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:05:14.581 - info: zigbee.0 (1983) Device query for '0x54ef441000782ea4' complete 2026-07-07 16:23:44.611 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.753 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.771 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.795 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.814 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.830 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:45.848 - info: web.0 (2127) ==> Connected system.user.admin from ::ffff:192.168.178.87 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.591 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.592 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.593 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:46.620 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 echarts-show 2026-07-07 16:23:57.848 - info: web.0 (2127) <== Disconnect system.user.admin from ::ffff:192.168.178.87 vis-2 2026-07-07 16:57:01.014 - info: host.iobroker instance system.adapter.yr.0 in version "5.3.0" started with pid 45958 2026-07-07 16:57:01.866 - info: yr.0 (45958) starting. Version 5.3.0 in /opt/iobroker/node_modules/iobroker.yr, node: v22.23.1, js-controller: 7.2.2 2026-07-07 16:57:01.874 - info: yr.0 (45958) longitude/longitude not set, get data from system 2026-07-07 16:57:01.883 - info: yr.0 (45958) system latitude: 51.2854687 longitude: 6.3590583 2026-07-07 16:57:11.166 - info: yr.0 (45958) Data updated. 2026-07-07 16:57:11.167 - info: yr.0 (45958) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-07-07 16:57:11.676 - info: host.iobroker instance system.adapter.yr.0 having pid 45958 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============= Mark until here for C&P =============
Und wenn ich diese nicht mehr verwende, also so:
Ich nutze immer ein Textfeld und kopiere dort das Objekt rein (kann man ja in der Ansicht per Klick vorne kopieren).
Hat nebenbei den Effekt das man sich so den Objektnamen aus Variablen zusammenbauen kann -
-
Meine obige Lösung scheint den Fehler auch nicht komplett erklären zu können, da ich bei anderen Triggern auch direkte Zugriffe auf die DPe habe, und diese Trigger auch nicht ausgelöst hatten.
Ich habe jetzt direkt hinter alle Trigger Logeinträge eingebaut, um die Sache besser analysieren zu können, vielleicht ergibt sich ja ein Muster.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
462
Online33.0k
Benutzer83.4k
Themen1.3m
Beiträge