influxdb - Datenhunger? bei 143 DP - 3MB/s ??
-
neuer DB Name, keine Änderung an den MB, bei den 143 sofort über 3MB/s rauf, beim deaktivieren des Adapter wieder unter 1MB/skann man iob diag in eine datei oder ins clipboard umleiten, markieren und cp fkt. nicht. auch ist es nicht vollständig, der Anfang ist nicht mehr da, kein weiteres zurückscrollen möglich. Das fkt. im Docker Terminal nicht.
- Ausgabe in file umgeleitet, copiert
iob_diag.txt
Das liegt auch automatisch schon in /home/iobroker drin.
Aber du solltest dir dringend ein richtiges Terminal anschaffen... - Ausgabe in file umgeleitet, copiert
-
ich habe alle Infos gebracht, wenn welche offen sind, dann bitte spezifisch nachfragen
diese Pauschalinfoanforderung soll jetzt für was gut sein ?? gibst ja keine Antwort drauf. so bringt das nichts und ist auch nicht gefragt.Nochmal, die Frage ist, warum Infux so einen Datengau verursacht
und 143 DP sind alleine die Zellspannungen der Batterien.....Wenn das Problem bei „in die Datenbank“ schreiben liegen würde, dann gäbe es hier mehr Berichte darüber.
Liest du den auch aus der Datenbank?
Als evtl. mit grafana oder JavaScript?
Evtl hast du nicht optimierte abfragen, welche zwar funktionieren, aber die Datenbank nötigen Tabellen von vorne bis hinten zu durchsuchen. Das kann auch viel Festplatten Traffic erzeugen.
Auch beim abfragen schreibt uU die Datenbank. Meist bei komplexeren Abfragen und großen Datenmengen. Dann wird erst abgefragt, in eine temporäre Tabelle geschrieben und dann Filter und gruppierungsregeln angewendet. -
nein, hatte mal versucht aus der Influx was auszulesen, hat aber nicht geklappt.
ansich wird nur in die Influx gespeichert, Grafana holt sich diese zur Visualisierung.gäbs ev. eine Methode das zu prüfen oder zu ergründen, was da sobald der Adapter läuft an Aufgaben laufen?
hab mal Loglevel silly gestartet
daran sieht man, dass er alle Datenpunkte aufzeichnet, somit hat der Adapter diese nicht aus seiner Datenbank gelöscht und nur die besagten 143 drin.
das wird die Ursache sein.ein minimaler Auszug:
2026-06-19 12:20:24.597 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.temperature.21.Temperature:{"val":"{\"value\":34.18102264404297}","ack":true,"ts":1781864424596,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424596} 2026-06-19 12:20:24.597 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.temperature.20.Temperature:{"val":"{\"value\":31.486989974975586}","ack":true,"ts":1781864424596,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424596} 2026-06-19 12:20:24.629 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */modbus.1.holdingRegisters.3.40023_Cell_Voltage_8:{"val":3330,"ack":true,"ts":1781864424628,"q":0,"from":"system.adapter.modbus.1","user":"system.user.admin","lc":1781864424628} 2026-06-19 12:20:24.647 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.History.Daily.0.TimeInBulk:{"val":"{\"value\":467}","ack":true,"ts":1781864424645,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424645} 2026-06-19 12:20:24.647 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.V:{"val":"{\"value\":262.3900146484375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.648 - [35msilly[39m: influxdb.0 (9365) States system redis pmessage mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P/mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P:{"val":"{\"value\":2176.070068359375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P:{"val":"{\"value\":2176.070068359375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.V:{"val":"{\"value\":261.1400146484375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States system redis pmessage mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P/mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P:{"val":"{\"value\":2227.1298828125}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.650 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P:{"val":"BG
-
nein, hatte mal versucht aus der Influx was auszulesen, hat aber nicht geklappt.
ansich wird nur in die Influx gespeichert, Grafana holt sich diese zur Visualisierung.gäbs ev. eine Methode das zu prüfen oder zu ergründen, was da sobald der Adapter läuft an Aufgaben laufen?
hab mal Loglevel silly gestartet
daran sieht man, dass er alle Datenpunkte aufzeichnet, somit hat der Adapter diese nicht aus seiner Datenbank gelöscht und nur die besagten 143 drin.
das wird die Ursache sein.ein minimaler Auszug:
2026-06-19 12:20:24.597 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.temperature.21.Temperature:{"val":"{\"value\":34.18102264404297}","ack":true,"ts":1781864424596,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424596} 2026-06-19 12:20:24.597 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.temperature.20.Temperature:{"val":"{\"value\":31.486989974975586}","ack":true,"ts":1781864424596,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424596} 2026-06-19 12:20:24.629 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */modbus.1.holdingRegisters.3.40023_Cell_Voltage_8:{"val":3330,"ack":true,"ts":1781864424628,"q":0,"from":"system.adapter.modbus.1","user":"system.user.admin","lc":1781864424628} 2026-06-19 12:20:24.647 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.History.Daily.0.TimeInBulk:{"val":"{\"value\":467}","ack":true,"ts":1781864424645,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424645} 2026-06-19 12:20:24.647 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.V:{"val":"{\"value\":262.3900146484375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.648 - [35msilly[39m: influxdb.0 (9365) States system redis pmessage mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P/mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P:{"val":"{\"value\":2176.070068359375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.1.P:{"val":"{\"value\":2176.070068359375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.V:{"val":"{\"value\":261.1400146484375}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.649 - [35msilly[39m: influxdb.0 (9365) States system redis pmessage mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P/mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P:{"val":"{\"value\":2227.1298828125}","ack":true,"ts":1781864424646,"q":0,"from":"system.adapter.mqtt.1","user":"system.user.admin","lc":1781864424646} 2026-06-19 12:20:24.650 - [35msilly[39m: influxdb.0 (9365) States user redis pmessage */mqtt.1.N.c0619ab336ed.solarcharger.0.Pv.0.P:{"val":"Also grafana liest aus der Datenbank?
Dann dort mal alles durchgehen und prüfen ob da zu oft große Datenmengen gelesen werden.
Nicht optimierte Abfragen kann man daran erkennen wenn bspw Werte in nicht indizierten Feldern gesucht werden müssen. Es gibt aber noch mehr Möglichkeiten sowas zu produzieren, aber ich gehe mal davon aus das du diese Möglichkeiten mit grafana nicht ausschöpfst.
Als ersten schnellen Test, kannst du mal Grafana stoppen, also den eigentlichen Dienst, nichts in IOBroker. Dann wirst du sehen, ob der Festplatten Traffic runtergeht.Und zusätzlich, nur eine Vermutung, unabhängig von dem vorhergehenden und auch bitte nicht gleichzeitig, den Javascript Adapter stoppen.
Nicht, dass du da noch ein Skript laufen hast -
es sind im Objektbaum nur die 143 drin
den Adapter nun gelöscht und neu installiert
beim start fragt er wieder alle! DP ab.
Gut, Ursachen nun klar, wie kann man es beheben?
in Influx habe ich alles Datenbanken gelöscht, sonst ist in keinem Reiter etwas drin
Grafana hat nur die Verbindung zur Influx DB
da ich nur einzeln die Qerys aus Influx raus kopiere und in Grafana eintrage, gibt es nur direkte Werte die angezeigt werden
BG
-
nochmal alles gelöscht und kein Objekt zur Aufzeichnung ausgewählt, also alles und keine Aufzeichnung
im Log zeigt er mir aber was an, das mich stutzig macht.
der Raspi4 ist für eine USB Verbindung zwischen Endgeräten im Lan. was macht der da?
die Meldung kommt jede Sekunde.- hab dazu chatgpt befragt und der meint, das ist nichts.
-
ich habe jetzt nur ein Objekt in der Influx aktiviert
und die Auslastung bleibt unbedeutend, erkenn keine signifikante MB/S Änderung in der Syno
kann es sein dass die Globale Funktion, wo man viele Objekte in der Influx eintragen kann - alle einträgt?
Test, mache jetzt wieder einen Objektbaum mit dem Schraubenschlüssel
im Log hat er die 143 eingetragen, angelegt
MB/s hoch auf 25, runter auf 4MB/s
also da läuft was schief!
alle Influx Objekte wieder gelöscht und Datenbank gelöscht und
sofort runter unter 1MB/S
wieder nur ein Objekt in die Influx eingetragen und es bleibt nicht relevant.
jetzt die ersten 16 Zellspannung eingetragen
es bleibt unauffällig
damit ist die Sache für mich klar, mehr kann ich da auch nicht weiter testen.
sobald man global die Einstellungen für Influxaufzeichnungen in den Objekten nutzt, reißt es die MB/s hoch. Warum, wiso, weshalb... kA. -
es sind im Objektbaum nur die 143 drin
den Adapter nun gelöscht und neu installiert
beim start fragt er wieder alle! DP ab.
Gut, Ursachen nun klar, wie kann man es beheben?
in Influx habe ich alles Datenbanken gelöscht, sonst ist in keinem Reiter etwas drin
Grafana hat nur die Verbindung zur Influx DB
da ich nur einzeln die Qerys aus Influx raus kopiere und in Grafana eintrage, gibt es nur direkte Werte die angezeigt werden
beim start fragt er wieder alle! DP ab.
Nein, er fragt nicht alle DP ab. Der Adapter abonniert nur alle Änderungen an den States. Nach jeder Änderung wird dann geprüft, ob für diesen DP eine Historierung konfiguriert ist. Falls nicht, bricht er sofort ab. Das hat keinerlei Auswirkungen auf die InfluxDB
im Log zeigt er mir aber was an, das mich stutzig macht.
Auch ganz normal. Der Adapter hat alle Objektänderungen abonniert, damit er mitbekommt, falls man zur Laufzeit zusätzliche DPs historisieren möchte. Keinerlei Auswirkung auf die InfluxDB.
wieder nur ein Objekt in die Influx eingetragen und es bleibt nicht relevant.
928 KB/sek sind auch schon viel zu viel für nur ein DP!
An deiner Stelle würde ich das Debug Log der InfluxDB auf "debug" stellen, damit man mal sieht, was dort abgeht.
-
ich habe keine Anzeige nur für die Influxdb und dessen MB/s, das ist die allgemeine Nutzung der SSD in der Syno.
das hat er jetzt mit Debug gemacht
influxdb.0 2026-06-20 10:45:57.307 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.306 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.306 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.291 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.291 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.290 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.290 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.289 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.284 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.283 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.283 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.282 debug Write Point: modbus.1.holdingRegisters.1.40031_Cell_Voltage_16 values:{"value":3320,"time":"2026-06-20T08:45:57.282Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.281 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3323,"time":"2026-06-20T08:45:57.281Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.280 debug Write Point: modbus.1.holdingRegisters.1.40029_Cell_Voltage_14 values:{"value":3323,"time":"2026-06-20T08:45:57.280Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.279 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3323,"time":"2026-06-20T08:45:57.279Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.278 debug Write Point: modbus.1.holdingRegisters.1.40027_Cell_Voltage_12 values:{"value":3321,"time":"2026-06-20T08:45:57.278Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.277 debug Write Point: modbus.1.holdingRegisters.1.40026_Cell_Voltage_11 values:{"value":3323,"time":"2026-06-20T08:45:57.277Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.276 debug Write Point: modbus.1.holdingRegisters.1.40025_Cell_Voltage_10 values:{"value":3321,"time":"2026-06-20T08:45:57.276Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.274 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3323,"time":"2026-06-20T08:45:57.274Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.271 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.270 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.269 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.263 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.253 debug connected set to true influxdb.0 2026-06-20 10:45:57.252 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.251 debug connected set to true influxdb.0 2026-06-20 10:45:57.250 debug Write Point: modbus.1.holdingRegisters.1.40023_Cell_Voltage_8 values:{"value":3323,"time":"2026-06-20T08:45:57.250Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.247 debug Write Point: modbus.1.holdingRegisters.1.40022_Cell_Voltage_7 values:{"value":3322,"time":"2026-06-20T08:45:57.247Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.246 debug Write Point: modbus.1.holdingRegisters.1.40021_Cell_Voltage_6 values:{"value":3323,"time":"2026-06-20T08:45:57.246Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.245 debug Write Point: modbus.1.holdingRegisters.1.40020_Cell_Voltage_5 values:{"value":3321,"time":"2026-06-20T08:45:57.245Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.244 debug Write Point: modbus.1.holdingRegisters.1.40019_Cell_Voltage_4 values:{"value":3321,"time":"2026-06-20T08:45:57.243Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.242 debug Write Point: modbus.1.holdingRegisters.1.40018_Cell_Voltage_3 values:{"value":3321,"time":"2026-06-20T08:45:57.242Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.241 debug Write Point: modbus.1.holdingRegisters.1.40017_Cell_Voltage_2 values:{"value":3321,"time":"2026-06-20T08:45:57.241Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.238 debug Write Point: modbus.1.holdingRegisters.1.40016_Cell_Voltage_1 values:{"value":3321,"time":"2026-06-20T08:45:57.238Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.231 info Connected! influxdb.0 2026-06-20 10:45:57.231 debug Storage type for metadata found in DB: fields influxdb.0 2026-06-20 10:45:57.231 debug Result of metadata storage type check: [[{"result":"_result","table":0,"_value":"_start"},{"result":"_result","table":0,"_value":"_stop"},{"result":"_result","table":0,"_value":"_field"},{"result":"_result","table":0,"_value":"_measurement"}],[{"result":"_result","table":0,"_value":"ack"},{"result":"_result","table":0,"_value":"from"},{"result":"_result","table":0,"_value":"q"},{"result":"_result","table":0,"_value":"value"}]] influxdb.0 2026-06-20 10:45:57.227 info enabled logging of modbus.1.holdingRegisters.1.40031_Cell_Voltage_16, Alias=false, 16 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40030_Cell_Voltage_15, Alias=false, 15 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40029_Cell_Voltage_14, Alias=false, 14 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40028_Cell_Voltage_13, Alias=false, 13 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40027_Cell_Voltage_12, Alias=false, 12 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40026_Cell_Voltage_11, Alias=false, 11 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40025_Cell_Voltage_10, Alias=false, 10 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40024_Cell_Voltage_9, Alias=false, 9 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40023_Cell_Voltage_8, Alias=false, 8 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40022_Cell_Voltage_7, Alias=false, 7 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40021_Cell_Voltage_6, Alias=false, 6 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40020_Cell_Voltage_5, Alias=false, 5 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40019_Cell_Voltage_4, Alias=false, 4 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40018_Cell_Voltage_3, Alias=false, 3 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40017_Cell_Voltage_2, Alias=false, 2 points now activated influxdb.0 2026-06-20 10:45:57.223 info enabled logging of modbus.1.holdingRegisters.1.40016_Cell_Voltage_1, Alias=false, 1 points now activated influxdb.0 2026-06-20 10:45:57.218 debug Query to execute: import "influxdata/influxdb/schema" schema.fieldKeys(bucket: "iobroker_data") influxdb.0 2026-06-20 10:45:57.187 debug Query to execute: import "influxdata/influxdb/schema" schema.tagKeys(bucket: "iobroker_data") influxdb.0 2026-06-20 10:45:57.186 info Applying retention policy for iobroker_data to 604800 seconds. Shard Group Duration (calculated): 86400 seconds influxdb.0 2026-06-20 10:45:57.185 debug Buckets: {"links":{"self":"/api/v2/buckets?descending=false&limit=20&offset=0&orgID=3cf840bcb0779b40"},"buckets":[{"id":"e3994af6661ac643","orgID":"3cf840bcb0779b40","type":"system","description":"System bucket for monitoring logs","name":"_monitoring","retentionRules":[{"type":"expire","everySeconds":604800,"shardGroupDurationSeconds":86400}],"createdAt":"2023-05-25T14:41:49.025351591Z","updatedAt":"2023-05-25T14:41:49.025351721Z","links":{"labels":"/api/v2/buckets/e3994af6661ac643/labels","members":"/api/v2/buckets/e3994af6661ac643/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/e3994af6661ac643/owners","self":"/api/v2/buckets/e3994af6661ac643","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=e3994af6661ac643"},"labels":[]},{"id":"c45ad76dafe2765e","orgID":"3cf840bcb0779b40","type":"system","description":"System bucket for task logs","name":"_tasks","retentionRules":[{"type":"expire","everySeconds":259200,"shardGroupDurationSeconds":86400}],"createdAt":"2023-05-25T14:41:49.007087662Z","updatedAt":"2023-05-25T14:41:49.007087792Z","links":{"labels":"/api/v2/buckets/c45ad76dafe2765e/labels","members":"/api/v2/buckets/c45ad76dafe2765e/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/c45ad76dafe2765e/owners","self":"/api/v2/buckets/c45ad76dafe2765e","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=c45ad76dafe2765e"},"labels":[]},{"id":"46cfcc8ba72dd42e","orgID":"3cf840bcb0779b40","type":"user","name":"iobroker_data","retentionRules":[{"type":"expire","everySeconds":604800,"shardGroupDurationSeconds":86400}],"createdAt":"2026-06-20T08:16:44.171066022Z","updatedAt":"2026-06-20T08:16:44.2590701Z","links":{"labels":"/api/v2/buckets/46cfcc8ba72dd42e/labels","members":"/api/v2/buckets/46cfcc8ba72dd42e/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/46cfcc8ba72dd42e/owners","self":"/api/v2/buckets/46cfcc8ba72dd42e","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=46cfcc8ba72dd42e"},"labels":[]}]} influxdb.0 2026-06-20 10:45:57.181 debug Organizations: {"links":{"self":"/api/v2/orgs"},"orgs":[{"links":{"buckets":"/api/v2/buckets?org=private","dashboards":"/api/v2/dashboards?org=private","labels":"/api/v2/orgs/3cf840bcb0779b40/labels","logs":"/api/v2/orgs/3cf840bcb0779b40/logs","members":"/api/v2/orgs/3cf840bcb0779b40/members","owners":"/api/v2/orgs/3cf840bcb0779b40/owners","secrets":"/api/v2/orgs/3cf840bcb0779b40/secrets","self":"/api/v2/orgs/3cf840bcb0779b40","tasks":"/api/v2/tasks?org=private"},"id":"3cf840bcb0779b40","name":"private","description":"","createdAt":"2023-05-25T14:41:48.998046672Z","updatedAt":"2023-05-25T14:41:48.998046802Z"}]} influxdb.0 2026-06-20 10:45:57.162 debug Organization being checked: private influxdb.0 2026-06-20 10:45:57.161 info Deactivated DB health checks (ping) via configuration influxdb.0 2026-06-20 10:45:57.159 debug Connect InfluxDB2: http://192.168.0.20:8086/ [iobroker_data] influxdb.0 2026-06-20 10:45:57.158 info Influx DB Version used: 2.x influxdb.0 2026-06-20 10:45:57.158 info Connecting http://192.168.0.20:8086/ ... influxdb.0 2026-06-20 10:45:57.157 info No stored data from last exit found influxdb.0 2026-06-20 10:45:57.144 info starting. Version 4.0.2 in /opt/iobroker/node_modules/iobroker.influxdb, node: v22.22.3, js-controller: 7.2.2 influxdb.0 2026-06-20 10:45:55.678 debug Plugin sentry Initialize Plugin (enabled=true)aktuell sind die 16 Werte per Hand angelegt und nicht über den Schraubenschlüssel
das geht dann so weiter
influxdb.0 2026-06-20 10:47:47.611 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:47.598 debug Write Point: modbus.1.holdingRegisters.1.40017_Cell_Voltage_2 values:{"value":3320,"time":"2026-06-20T08:47:47.598Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:41.978 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:41.954 debug Write Point: modbus.1.holdingRegisters.1.40021_Cell_Voltage_6 values:{"value":3321,"time":"2026-06-20T08:47:41.954Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:38.041 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:38.026 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3321,"time":"2026-06-20T08:47:37.723Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:36.421 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:36.402 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:36.391 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3321,"time":"2026-06-20T08:47:36.391Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:36.389 debug Write Point: modbus.1.holdingRegisters.1.40022_Cell_Voltage_7 values:{"value":3321,"time":"2026-06-20T08:47:36.389Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:26.845 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:26.820 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3322,"time":"2026-06-20T08:47:26.517Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:21.230 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:21.214 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3321,"time":"2026-06-20T08:47:20.912Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.041 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.039 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.021 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.007 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.006 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.005 debug Write Point: modbus.1.holdingRegisters.1.40023_Cell_Voltage_8 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:46:58.813 debug Point written to iobroker_data influxdb.0 2026-06-20 10:46:58.800 debug Write Point: modbus.1.holdingRegisters.1.40018_Cell_Voltage_3 values:{"value":3320,"time":"2026-06-20T08:46:58.498Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: nullBG
-
ich habe keine Anzeige nur für die Influxdb und dessen MB/s, das ist die allgemeine Nutzung der SSD in der Syno.
das hat er jetzt mit Debug gemacht
influxdb.0 2026-06-20 10:45:57.307 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.306 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.306 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.291 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.291 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.290 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.290 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.289 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.284 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.283 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.283 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.282 debug Write Point: modbus.1.holdingRegisters.1.40031_Cell_Voltage_16 values:{"value":3320,"time":"2026-06-20T08:45:57.282Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.281 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3323,"time":"2026-06-20T08:45:57.281Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.280 debug Write Point: modbus.1.holdingRegisters.1.40029_Cell_Voltage_14 values:{"value":3323,"time":"2026-06-20T08:45:57.280Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.279 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3323,"time":"2026-06-20T08:45:57.279Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.278 debug Write Point: modbus.1.holdingRegisters.1.40027_Cell_Voltage_12 values:{"value":3321,"time":"2026-06-20T08:45:57.278Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.277 debug Write Point: modbus.1.holdingRegisters.1.40026_Cell_Voltage_11 values:{"value":3323,"time":"2026-06-20T08:45:57.277Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.276 debug Write Point: modbus.1.holdingRegisters.1.40025_Cell_Voltage_10 values:{"value":3321,"time":"2026-06-20T08:45:57.276Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.274 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3323,"time":"2026-06-20T08:45:57.274Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.271 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.270 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.269 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.263 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.253 debug connected set to true influxdb.0 2026-06-20 10:45:57.252 debug Point written to iobroker_data influxdb.0 2026-06-20 10:45:57.251 debug connected set to true influxdb.0 2026-06-20 10:45:57.250 debug Write Point: modbus.1.holdingRegisters.1.40023_Cell_Voltage_8 values:{"value":3323,"time":"2026-06-20T08:45:57.250Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.247 debug Write Point: modbus.1.holdingRegisters.1.40022_Cell_Voltage_7 values:{"value":3322,"time":"2026-06-20T08:45:57.247Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.246 debug Write Point: modbus.1.holdingRegisters.1.40021_Cell_Voltage_6 values:{"value":3323,"time":"2026-06-20T08:45:57.246Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.245 debug Write Point: modbus.1.holdingRegisters.1.40020_Cell_Voltage_5 values:{"value":3321,"time":"2026-06-20T08:45:57.245Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.244 debug Write Point: modbus.1.holdingRegisters.1.40019_Cell_Voltage_4 values:{"value":3321,"time":"2026-06-20T08:45:57.243Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.242 debug Write Point: modbus.1.holdingRegisters.1.40018_Cell_Voltage_3 values:{"value":3321,"time":"2026-06-20T08:45:57.242Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.241 debug Write Point: modbus.1.holdingRegisters.1.40017_Cell_Voltage_2 values:{"value":3321,"time":"2026-06-20T08:45:57.241Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.238 debug Write Point: modbus.1.holdingRegisters.1.40016_Cell_Voltage_1 values:{"value":3321,"time":"2026-06-20T08:45:57.238Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.231 info Connected! influxdb.0 2026-06-20 10:45:57.231 debug Storage type for metadata found in DB: fields influxdb.0 2026-06-20 10:45:57.231 debug Result of metadata storage type check: [[{"result":"_result","table":0,"_value":"_start"},{"result":"_result","table":0,"_value":"_stop"},{"result":"_result","table":0,"_value":"_field"},{"result":"_result","table":0,"_value":"_measurement"}],[{"result":"_result","table":0,"_value":"ack"},{"result":"_result","table":0,"_value":"from"},{"result":"_result","table":0,"_value":"q"},{"result":"_result","table":0,"_value":"value"}]] influxdb.0 2026-06-20 10:45:57.227 info enabled logging of modbus.1.holdingRegisters.1.40031_Cell_Voltage_16, Alias=false, 16 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40030_Cell_Voltage_15, Alias=false, 15 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40029_Cell_Voltage_14, Alias=false, 14 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40028_Cell_Voltage_13, Alias=false, 13 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40027_Cell_Voltage_12, Alias=false, 12 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40026_Cell_Voltage_11, Alias=false, 11 points now activated influxdb.0 2026-06-20 10:45:57.226 info enabled logging of modbus.1.holdingRegisters.1.40025_Cell_Voltage_10, Alias=false, 10 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40024_Cell_Voltage_9, Alias=false, 9 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40023_Cell_Voltage_8, Alias=false, 8 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40022_Cell_Voltage_7, Alias=false, 7 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40021_Cell_Voltage_6, Alias=false, 6 points now activated influxdb.0 2026-06-20 10:45:57.225 info enabled logging of modbus.1.holdingRegisters.1.40020_Cell_Voltage_5, Alias=false, 5 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40019_Cell_Voltage_4, Alias=false, 4 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40018_Cell_Voltage_3, Alias=false, 3 points now activated influxdb.0 2026-06-20 10:45:57.224 info enabled logging of modbus.1.holdingRegisters.1.40017_Cell_Voltage_2, Alias=false, 2 points now activated influxdb.0 2026-06-20 10:45:57.223 info enabled logging of modbus.1.holdingRegisters.1.40016_Cell_Voltage_1, Alias=false, 1 points now activated influxdb.0 2026-06-20 10:45:57.218 debug Query to execute: import "influxdata/influxdb/schema" schema.fieldKeys(bucket: "iobroker_data") influxdb.0 2026-06-20 10:45:57.187 debug Query to execute: import "influxdata/influxdb/schema" schema.tagKeys(bucket: "iobroker_data") influxdb.0 2026-06-20 10:45:57.186 info Applying retention policy for iobroker_data to 604800 seconds. Shard Group Duration (calculated): 86400 seconds influxdb.0 2026-06-20 10:45:57.185 debug Buckets: {"links":{"self":"/api/v2/buckets?descending=false&limit=20&offset=0&orgID=3cf840bcb0779b40"},"buckets":[{"id":"e3994af6661ac643","orgID":"3cf840bcb0779b40","type":"system","description":"System bucket for monitoring logs","name":"_monitoring","retentionRules":[{"type":"expire","everySeconds":604800,"shardGroupDurationSeconds":86400}],"createdAt":"2023-05-25T14:41:49.025351591Z","updatedAt":"2023-05-25T14:41:49.025351721Z","links":{"labels":"/api/v2/buckets/e3994af6661ac643/labels","members":"/api/v2/buckets/e3994af6661ac643/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/e3994af6661ac643/owners","self":"/api/v2/buckets/e3994af6661ac643","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=e3994af6661ac643"},"labels":[]},{"id":"c45ad76dafe2765e","orgID":"3cf840bcb0779b40","type":"system","description":"System bucket for task logs","name":"_tasks","retentionRules":[{"type":"expire","everySeconds":259200,"shardGroupDurationSeconds":86400}],"createdAt":"2023-05-25T14:41:49.007087662Z","updatedAt":"2023-05-25T14:41:49.007087792Z","links":{"labels":"/api/v2/buckets/c45ad76dafe2765e/labels","members":"/api/v2/buckets/c45ad76dafe2765e/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/c45ad76dafe2765e/owners","self":"/api/v2/buckets/c45ad76dafe2765e","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=c45ad76dafe2765e"},"labels":[]},{"id":"46cfcc8ba72dd42e","orgID":"3cf840bcb0779b40","type":"user","name":"iobroker_data","retentionRules":[{"type":"expire","everySeconds":604800,"shardGroupDurationSeconds":86400}],"createdAt":"2026-06-20T08:16:44.171066022Z","updatedAt":"2026-06-20T08:16:44.2590701Z","links":{"labels":"/api/v2/buckets/46cfcc8ba72dd42e/labels","members":"/api/v2/buckets/46cfcc8ba72dd42e/members","org":"/api/v2/orgs/3cf840bcb0779b40","owners":"/api/v2/buckets/46cfcc8ba72dd42e/owners","self":"/api/v2/buckets/46cfcc8ba72dd42e","write":"/api/v2/write?org=3cf840bcb0779b40&bucket=46cfcc8ba72dd42e"},"labels":[]}]} influxdb.0 2026-06-20 10:45:57.181 debug Organizations: {"links":{"self":"/api/v2/orgs"},"orgs":[{"links":{"buckets":"/api/v2/buckets?org=private","dashboards":"/api/v2/dashboards?org=private","labels":"/api/v2/orgs/3cf840bcb0779b40/labels","logs":"/api/v2/orgs/3cf840bcb0779b40/logs","members":"/api/v2/orgs/3cf840bcb0779b40/members","owners":"/api/v2/orgs/3cf840bcb0779b40/owners","secrets":"/api/v2/orgs/3cf840bcb0779b40/secrets","self":"/api/v2/orgs/3cf840bcb0779b40","tasks":"/api/v2/tasks?org=private"},"id":"3cf840bcb0779b40","name":"private","description":"","createdAt":"2023-05-25T14:41:48.998046672Z","updatedAt":"2023-05-25T14:41:48.998046802Z"}]} influxdb.0 2026-06-20 10:45:57.162 debug Organization being checked: private influxdb.0 2026-06-20 10:45:57.161 info Deactivated DB health checks (ping) via configuration influxdb.0 2026-06-20 10:45:57.159 debug Connect InfluxDB2: http://192.168.0.20:8086/ [iobroker_data] influxdb.0 2026-06-20 10:45:57.158 info Influx DB Version used: 2.x influxdb.0 2026-06-20 10:45:57.158 info Connecting http://192.168.0.20:8086/ ... influxdb.0 2026-06-20 10:45:57.157 info No stored data from last exit found influxdb.0 2026-06-20 10:45:57.144 info starting. Version 4.0.2 in /opt/iobroker/node_modules/iobroker.influxdb, node: v22.22.3, js-controller: 7.2.2 influxdb.0 2026-06-20 10:45:55.678 debug Plugin sentry Initialize Plugin (enabled=true)aktuell sind die 16 Werte per Hand angelegt und nicht über den Schraubenschlüssel
das geht dann so weiter
influxdb.0 2026-06-20 10:47:47.611 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:47.598 debug Write Point: modbus.1.holdingRegisters.1.40017_Cell_Voltage_2 values:{"value":3320,"time":"2026-06-20T08:47:47.598Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:41.978 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:41.954 debug Write Point: modbus.1.holdingRegisters.1.40021_Cell_Voltage_6 values:{"value":3321,"time":"2026-06-20T08:47:41.954Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:38.041 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:38.026 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3321,"time":"2026-06-20T08:47:37.723Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:36.421 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:36.402 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:36.391 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3321,"time":"2026-06-20T08:47:36.391Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:36.389 debug Write Point: modbus.1.holdingRegisters.1.40022_Cell_Voltage_7 values:{"value":3321,"time":"2026-06-20T08:47:36.389Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:26.845 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:26.820 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3322,"time":"2026-06-20T08:47:26.517Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:21.230 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:21.214 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3321,"time":"2026-06-20T08:47:20.912Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.041 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.039 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.021 debug Point written to iobroker_data influxdb.0 2026-06-20 10:47:10.007 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.006 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:47:10.005 debug Write Point: modbus.1.holdingRegisters.1.40023_Cell_Voltage_8 values:{"value":3322,"time":"2026-06-20T08:47:09.702Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:46:58.813 debug Point written to iobroker_data influxdb.0 2026-06-20 10:46:58.800 debug Write Point: modbus.1.holdingRegisters.1.40018_Cell_Voltage_3 values:{"value":3320,"time":"2026-06-20T08:46:58.498Z","from":"system.adapter.modbus.1","q":0,"ack":true} options: null -
Kein Wunder. Da werden Daten im Millisekundentakt geschrieben.
Ro75.
SERVER = Beelink U59 16GB DDR4 RAM 512GB SSD, FB 7490, FritzDect 200+301+440, ConBee II, Zigbee Aqara Sensoren + NOUS A1Z, NOUS A1T, Philips Hue ** ioBroker, REDIS, influxdb2, Grafana, PiHole, Plex-Mediaserver, paperless-ngx (Docker), MariaDB + phpmyadmin *** VIS-Runtime = Intel NUC 8GB RAM 128GB SSD + 24" Touchscreen
-
influxdb.0 2026-06-20 10:45:57.282 debug Write Point: modbus.1.holdingRegisters.1.40031_Cell_Voltage_16 values:{"value":3320,"time":"2026-06-20T08:45:57.282Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.281 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3323,"time":"2026-06-20T08:45:57.281Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.280 debug Write Point: modbus.1.holdingRegisters.1.40029_Cell_Voltage_14 values:{"value":3323,"time":"2026-06-20T08:45:57.280Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.279 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3323,"time":"2026-06-20T08:45:57.279Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.278 debug Write Point: modbus.1.holdingRegisters.1.40027_Cell_Voltage_12 values:{"value":3321,"time":"2026-06-20T08:45:57.278Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.277 debug Write Point: modbus.1.holdingRegisters.1.40026_Cell_Voltage_11 values:{"value":3323,"time":"2026-06-20T08:45:57.277Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.276 debug Write Point: modbus.1.holdingRegisters.1.40025_Cell_Voltage_10 values:{"value":3321,"time":"2026-06-20T08:45:57.276Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.274 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3323,"time":"2026-06-20T08:45:57.274Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0das sind für mich ms.
Ro75.
SERVER = Beelink U59 16GB DDR4 RAM 512GB SSD, FB 7490, FritzDect 200+301+440, ConBee II, Zigbee Aqara Sensoren + NOUS A1Z, NOUS A1T, Philips Hue ** ioBroker, REDIS, influxdb2, Grafana, PiHole, Plex-Mediaserver, paperless-ngx (Docker), MariaDB + phpmyadmin *** VIS-Runtime = Intel NUC 8GB RAM 128GB SSD + 24" Touchscreen
-
influxdb.0 2026-06-20 10:45:57.282 debug Write Point: modbus.1.holdingRegisters.1.40031_Cell_Voltage_16 values:{"value":3320,"time":"2026-06-20T08:45:57.282Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.281 debug Write Point: modbus.1.holdingRegisters.1.40030_Cell_Voltage_15 values:{"value":3323,"time":"2026-06-20T08:45:57.281Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.280 debug Write Point: modbus.1.holdingRegisters.1.40029_Cell_Voltage_14 values:{"value":3323,"time":"2026-06-20T08:45:57.280Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.279 debug Write Point: modbus.1.holdingRegisters.1.40028_Cell_Voltage_13 values:{"value":3323,"time":"2026-06-20T08:45:57.279Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.278 debug Write Point: modbus.1.holdingRegisters.1.40027_Cell_Voltage_12 values:{"value":3321,"time":"2026-06-20T08:45:57.278Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.277 debug Write Point: modbus.1.holdingRegisters.1.40026_Cell_Voltage_11 values:{"value":3323,"time":"2026-06-20T08:45:57.277Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.276 debug Write Point: modbus.1.holdingRegisters.1.40025_Cell_Voltage_10 values:{"value":3321,"time":"2026-06-20T08:45:57.276Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0 2026-06-20 10:45:57.274 debug Write Point: modbus.1.holdingRegisters.1.40024_Cell_Voltage_9 values:{"value":3323,"time":"2026-06-20T08:45:57.274Z","from":"system.adapter.influxdb.0","q":0,"ack":true} options: null influxdb.0das sind für mich ms.
Ro75.
das sind für mich ms.
Ich dachte, du beziehst dich auf den Screenshot.
Aber auch hier kann man aus den Log-Daten aus meiner Sicht nichts ableiten. Es könnte ja sein, dass in einer Zehntelsekunde 20 Zell-Spannungen geschrieben werden, und dann eine Minute Ruhe ist. Auf der Suche nach der Ursache bringen die hier gezeigten Daten nichts.
Ein Debug Log der InfluxDB während die 20MB/s Last entstehen, könnte da hilfreicher sein.
NUC10I3+Ubuntu+Docker+ioBroker+influxDB2+Node Red+EMQX+Grafana
Pi-hole, Traefik, Checkmk, Conbee II+Zigbee2MQTT, ESPSomfy-RTS, LoRaWAN
Benutzt das Voting im Beitrag, wenn er euch geholfen hat.
-
das sind für mich ms.
Ich dachte, du beziehst dich auf den Screenshot.
Aber auch hier kann man aus den Log-Daten aus meiner Sicht nichts ableiten. Es könnte ja sein, dass in einer Zehntelsekunde 20 Zell-Spannungen geschrieben werden, und dann eine Minute Ruhe ist. Auf der Suche nach der Ursache bringen die hier gezeigten Daten nichts.
Ein Debug Log der InfluxDB während die 20MB/s Last entstehen, könnte da hilfreicher sein.
Dann kennt man zwar den Grund.
Zielführender wäre es die einzelnen datenpunkte durchzugehen und sich fragen in welcher granularity die Daten wirklich aufgezeichnet werden müssen.Entprellzeit und Blockzeit
Nur Änderungen aufzeichnen -
Dann kennt man zwar den Grund.
Zielführender wäre es die einzelnen datenpunkte durchzugehen und sich fragen in welcher granularity die Daten wirklich aufgezeichnet werden müssen.Entprellzeit und Blockzeit
Nur Änderungen aufzeichnen
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden387
Online33.0k
Benutzer83.5k
Themen1.3m
Beiträge