OpenKNX: Senden dauert ca. 10 Sekunden
ioBroker Allgemein
25
Beiträge
5
Kommentatoren
135
Aufrufe
4
Watching
-
Mir ist nichts aufgefallen.
ich verstehe, dass das ein unangenehmer Fehler ist, weil nicht so leicht und so schnell zu reproduzieren.
Kann ich irgendwas speziell fürs debuggen einstellen, so dass man besser im Feherfall was erkennt?
Muss nach dem durchgeführten Neustart des Adapter wahrscheinlich wieder einige Tage warten bis der Fehler wieder kommt. -
Ich habe folgendes gefunden.
Ein anderer User: raven0815 hat am 30 Jun 2024, 19:02 auch gemeldet:
OpenKNX Übertragung auf KNX Bus verzögert
Die Verzögerung zwischen Tasterbetätigung und dem Schalten des Aktors war weniger als 1 Sek. Seit kurzem ist die Übertragung um bis zu 10Sek verzögert.Vieleicht das gleiche Problem?
Damals hat ihm niemand geantwortet. -
Ich bin erleichtert, dass der Fehler kein Phantom ist und tatsächlich reproduzierbar zu sein scheint.
Der KNX OpenKNX Adapter ist ja ein wichtiger Bestandteil von ioBroker.Weiß jemand, ob der ursprüngliche Entwickler noch aktiv ist?
Soweit ich verstanden habe, ist der Adapter Open Source.
Falls der Entwickler aktuell keine Zeit hat, könnte sich vielleicht ein anderer Entwickler den Fehler einmal ansehen. -
Ich bin erleichtert, dass der Fehler kein Phantom ist und tatsächlich reproduzierbar zu sein scheint.
Der KNX OpenKNX Adapter ist ja ein wichtiger Bestandteil von ioBroker.Weiß jemand, ob der ursprüngliche Entwickler noch aktiv ist?
Soweit ich verstanden habe, ist der Adapter Open Source.
Falls der Entwickler aktuell keine Zeit hat, könnte sich vielleicht ein anderer Entwickler den Fehler einmal ansehen.@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
Soweit ich verstanden habe, ist der Adapter Open Source.
ja
https://github.com/iobroker-community-adapters/ioBroker.openknx@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
Weiß jemand, ob der ursprüngliche Entwickler noch aktiv ist?
Anscheinend schon mehrere Jahre nicht mehr.
@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
könnte sich vielleicht ein anderer Entwickler den Fehler einmal ansehen.
Hast du ein Issue erstellt?
-
Ich habe ein GitHub-Issue zu diesem Problem erstellt.
Allerdings scheint es bei diesem Adapter seit einiger Zeit keine Aktivitäten zu geben.
Das letzte Release ist Version 0.9.0 vom April 2024.Ich hoffe, dass sich jemand des Problems annehmen kann.
-
Ich habe ein GitHub-Issue zu diesem Problem erstellt.
Allerdings scheint es bei diesem Adapter seit einiger Zeit keine Aktivitäten zu geben.
Das letzte Release ist Version 0.9.0 vom April 2024.Ich hoffe, dass sich jemand des Problems annehmen kann.
-
Ich habe ein GitHub-Issue zu diesem Problem erstellt.
Allerdings scheint es bei diesem Adapter seit einiger Zeit keine Aktivitäten zu geben.
Das letzte Release ist Version 0.9.0 vom April 2024.Ich hoffe, dass sich jemand des Problems annehmen kann.
Wie sieht dein System aus? Insbesondere die nodejs-Installation?
Ich habe bei mir festgestellt, dass nodejs>22 performanter im Netzwerk ist.
Ich hatte z. B. beim parcel-Adapter sehr häufig timeouts, mit aktuellsten nodejs-releases ist das verschwunden. -
-
Ich habe Node.js: v22.22.1
Und ansonsten? Irgendwelche 'dicken Hunde'? Schau dir die Ausgabe von
iob diagan.
-
Bei iob diag kommt nichts auffälliges.
Es steht mehrmals drinnen: "No problems detected" und auch "all good"
Wie gesagt sonst kene Auffälligkeiten bei der Ausgabe. -
Bei iob diag kommt nichts auffälliges.
Es steht mehrmals drinnen: "No problems detected" und auch "all good"
Wie gesagt sonst kene Auffälligkeiten bei der Ausgabe.@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
Wie gesagt sonst kene Auffälligkeiten bei der Ausgabe.
Zeig mal die vollständige Ausgabe.
-
Hier der Output:
Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Linux Mint 22 Static hostname: xxx Icon name: computer-desktop Chassis: desktop 🖥️ Kernel: Linux 6.8.0-101-generic Architecture: x86-64 Hardware Vendor: Lenovo Hardware Model: ThinkCentre M920q Firmware Version: M1UKT39A Firmware Date: Fri 2019-05-10 Firmware Age: 6y 10month OS is similar to: ubuntu debian model name : Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 18:57:39 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 CPU threads: 6 *** LIFE CYCLE STATUS *** Unknown release codenamed 'wilma'. Please check yourself if the Operating System is actively maintained. *** TIME AND TIMEZONES *** Local time: Tue 2026-03-10 18:57:39 CET Universal time: Tue 2026-03-10 17:57:39 UTC RTC time: Tue 2026-03-10 17:57:39 Time zone: Europe/Vienna (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': xxx HOME=/home/xxx GROUPS=xxx adm cdrom sudo dip plugdev users lpadmin sambashare iobroker User that is running 'js-controller': /home/iobroker/.diag.sh: line 495: [[: 9308 1278134 1278135 1278136: syntax error in expression (error token is "1278134 1278135 1278136") js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: cinnamon Session: x11 System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 33G 4.4G 25G 604M 4.6G 29G Swap: 2.1G 0B 2.1G Total: 35G 4.4G 27G Active iob-Instances: 8 31932 M total memory 4173 M used memory 3688 M active memory 2493 M inactive memory 24426 M free memory 536 M buffer memory 3828 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 18:57:40 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 Tasks: 301 total, 1 running, 293 sleeping, 7 stopped, 0 zombie %Cpu(s): 8.8 us, 5.9 sy, 0.0 ni, 85.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 31932.3 total, 24426.3 free, 4173.7 used, 4364.2 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 27758.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * casper-md5check.service loaded failed failed casper-md5check Verify Live ISO checksums Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on tmpfs tmpfs 3.2G 4.9M 3.2G 1% /run /dev/nvme0n1p3 ext4 234G 17G 205G 8% / tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/nvme0n1p2 vfat 512M 6.2M 506M 2% /boot/efi tmpfs tmpfs 3.2G 216K 3.2G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): mounted filesystem b1e492fb-7e6c-41da-9422-e5f7cd3f69eb ro with ordered data mode. Quota mode: none. [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): re-mounted b1e492fb-7e6c-41da-9422-e5f7cd3f69eb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p3 ext4 rw,relatime,errors=remount-ro |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/efi /dev/nvme0n1p2 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.4G /var/cache/apt/archives 621M /var/lib Archived and active journals take up 587.1M in the file system. /opt/iobroker/backups: 1.8M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 357M /opt/iobroker/iobroker-data/ 86M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 200M /opt/iobroker/iobroker-data/PV_logger.log 13M /opt/iobroker/iobroker-data/objects.jsonl 7.3M /opt/iobroker/iobroker-data/states.jsonl 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-CnpybLRW.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 18.19.1+dfsg-6ubuntu5 500 500 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: xxx xxx (version: 7.0.7, hostname: xxx , alive, uptime: 168113) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : XXX - enabled + system.adapter.denon.0 : denon : XXX - enabled + system.adapter.discovery.0 : discovery : XXX - enabled system.adapter.ico-cloud.0 : ico-cloud : XXX - enabled + system.adapter.javascript.0 : javascript : XXX - enabled system.adapter.klf200.0 : klf200 : XXX - enabled + system.adapter.openknx.0 : openknx : XXX - enabled + system.adapter.pushover.0 : pushover : XXX - enabled + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ico-cloud" : 2.0.3 , installed 2.0.3 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "klf200" : 1.3.5 , installed 1.3.5 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 1666 States: 1147 *** OS-Repositories and Updates *** Hit:1 https://deb.nodesource.com/node_22.x nodistro InRelease Ign:2 http://packages.linuxmint.com wilma InRelease Hit:3 http://security.ubuntu.com/ubuntu noble-security InRelease Hit:4 http://packages.linuxmint.com wilma Release Hit:5 http://archive.ubuntu.com/ubuntu noble InRelease Hit:6 http://archive.ubuntu.com/ubuntu noble-updates InRelease Hit:7 http://archive.ubuntu.com/ubuntu noble-backports InRelease Reading package lists... Pending systemupdates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 68537 9308/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 70688 9308/iobroker.js-co tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 991 10268 656/systemd-resolve tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5932 1/init tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4382 1/init tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 17830 2070/smbd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 17829 2070/smbd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 5521901 763892/cupsd tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 991 10266 656/systemd-resolve tcp6 0 0 :::3389 :::* LISTEN 124 9945 984/xrdp tcp6 0 0 ::1:631 :::* LISTEN 0 5521900 763892/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 12446 961/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 5934 1/init tcp6 0 0 :::111 :::* LISTEN 0 7288 1/init tcp6 0 0 :::139 :::* LISTEN 0 17828 2070/smbd tcp6 0 0 :::445 :::* LISTEN 0 17827 2070/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 81000 11179/io.admin.0 tcp6 0 0 :::21118 :::* LISTEN 1000 9084660 1255681/rustdesk udp 0 0 127.0.0.54:53 0.0.0.0:* 991 10267 656/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 991 10265 656/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4383 1/init udp 0 0 192.168.0.255:137 0.0.0.0:* 0 15151 2053/nmbd udp 0 0 192.168.0.109:137 0.0.0.0:* 0 15150 2053/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 15138 2053/nmbd udp 0 0 192.168.0.255:138 0.0.0.0:* 0 15153 2053/nmbd udp 0 0 192.168.0.109:138 0.0.0.0:* 0 15152 2053/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 15139 2053/nmbd udp 0 0 0.0.0.0:34046 0.0.0.0:* 1000 9081558 1255681/rustdesk udp 0 0 0.0.0.0:21119 0.0.0.0:* 1000 9085156 1255681/rustdesk udp 0 0 0.0.0.0:37634 0.0.0.0:* 1001 71829 9541/io.openknx.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 111 6051 704/avahi-daemon: r udp 0 0 0.0.0.0:46487 0.0.0.0:* 111 6053 704/avahi-daemon: r udp6 0 0 :::111 :::* 0 6216 1/init udp6 0 0 :::36853 :::* 111 6054 704/avahi-daemon: r udp6 0 0 :::5353 :::* 111 6052 704/avahi-daemon: r udp6 0 0 :::48714 :::* 1000 9246368 1278176/firefox *** Log File - Last 25 Lines *** 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.0b (ada6) data: {"65281":{"1":3015,"3":26,"4":17320,"5":40,"6":7,"10":0,"100":0}} options: {} meta:{"deviceIEEE":"0x00158d008b89863e","logger":"StatesController","state":{"state":""}} result:{} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.1c (ada6) candidates: [{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}] => payload {"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I03 (ada6) message received '{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}' from device 00158d008b89863e type 'MCCGQ11LM' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '100' from device 00158d008b89863e for 'Remaining battery in %, can take up to 24 hours before reported' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'false' from device 00158d008b89863e for 'Is open' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'true' from device 00158d008b89863e for 'Indicates if the contact is closed (= true) or open (= false)' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '26' from device 00158d008b89863e for 'Temperature of the device' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '39' from device 00158d008b89863e for 'Number of power outages' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '6' from device 00158d008b89863e for 'Indicates how many times the sensor was triggered (since last scheduled report)' 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: On geändert vonalias.0.ZigBee.Tuerkontakt_EG_Windfang.contactWert=true 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake geschossen" auf true senden 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake ohne Eingang" auf true senden 2026-03-10 18:50:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '16.717' seconds ago. 2026-03-10 18:52:07.278 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell 2026-03-10 18:52:07.278 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 22.48 2026-03-10 18:52:07.278 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell: 22.48 2026-03-10 18:52:07.289 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell 2026-03-10 18:52:07.289 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 37.96 2026-03-10 18:52:07.289 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell: 37.96 2026-03-10 18:55:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '316.717' seconds ago. 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauftemperatur Wärmeerzeuger (=Warmasser) geändert:37 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauf-SOLL-Temperatur Heizkreis geändert 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: value = 37============ Mark until here for C&P =============
iob diag has finished.
-
Hier der Output:
Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Linux Mint 22 Static hostname: xxx Icon name: computer-desktop Chassis: desktop 🖥️ Kernel: Linux 6.8.0-101-generic Architecture: x86-64 Hardware Vendor: Lenovo Hardware Model: ThinkCentre M920q Firmware Version: M1UKT39A Firmware Date: Fri 2019-05-10 Firmware Age: 6y 10month OS is similar to: ubuntu debian model name : Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 18:57:39 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 CPU threads: 6 *** LIFE CYCLE STATUS *** Unknown release codenamed 'wilma'. Please check yourself if the Operating System is actively maintained. *** TIME AND TIMEZONES *** Local time: Tue 2026-03-10 18:57:39 CET Universal time: Tue 2026-03-10 17:57:39 UTC RTC time: Tue 2026-03-10 17:57:39 Time zone: Europe/Vienna (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': xxx HOME=/home/xxx GROUPS=xxx adm cdrom sudo dip plugdev users lpadmin sambashare iobroker User that is running 'js-controller': /home/iobroker/.diag.sh: line 495: [[: 9308 1278134 1278135 1278136: syntax error in expression (error token is "1278134 1278135 1278136") js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: cinnamon Session: x11 System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 33G 4.4G 25G 604M 4.6G 29G Swap: 2.1G 0B 2.1G Total: 35G 4.4G 27G Active iob-Instances: 8 31932 M total memory 4173 M used memory 3688 M active memory 2493 M inactive memory 24426 M free memory 536 M buffer memory 3828 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 18:57:40 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 Tasks: 301 total, 1 running, 293 sleeping, 7 stopped, 0 zombie %Cpu(s): 8.8 us, 5.9 sy, 0.0 ni, 85.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 31932.3 total, 24426.3 free, 4173.7 used, 4364.2 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 27758.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * casper-md5check.service loaded failed failed casper-md5check Verify Live ISO checksums Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on tmpfs tmpfs 3.2G 4.9M 3.2G 1% /run /dev/nvme0n1p3 ext4 234G 17G 205G 8% / tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/nvme0n1p2 vfat 512M 6.2M 506M 2% /boot/efi tmpfs tmpfs 3.2G 216K 3.2G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): mounted filesystem b1e492fb-7e6c-41da-9422-e5f7cd3f69eb ro with ordered data mode. Quota mode: none. [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): re-mounted b1e492fb-7e6c-41da-9422-e5f7cd3f69eb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p3 ext4 rw,relatime,errors=remount-ro |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/efi /dev/nvme0n1p2 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.4G /var/cache/apt/archives 621M /var/lib Archived and active journals take up 587.1M in the file system. /opt/iobroker/backups: 1.8M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 357M /opt/iobroker/iobroker-data/ 86M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 200M /opt/iobroker/iobroker-data/PV_logger.log 13M /opt/iobroker/iobroker-data/objects.jsonl 7.3M /opt/iobroker/iobroker-data/states.jsonl 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-CnpybLRW.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 18.19.1+dfsg-6ubuntu5 500 500 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: xxx xxx (version: 7.0.7, hostname: xxx , alive, uptime: 168113) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : XXX - enabled + system.adapter.denon.0 : denon : XXX - enabled + system.adapter.discovery.0 : discovery : XXX - enabled system.adapter.ico-cloud.0 : ico-cloud : XXX - enabled + system.adapter.javascript.0 : javascript : XXX - enabled system.adapter.klf200.0 : klf200 : XXX - enabled + system.adapter.openknx.0 : openknx : XXX - enabled + system.adapter.pushover.0 : pushover : XXX - enabled + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ico-cloud" : 2.0.3 , installed 2.0.3 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "klf200" : 1.3.5 , installed 1.3.5 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 1666 States: 1147 *** OS-Repositories and Updates *** Hit:1 https://deb.nodesource.com/node_22.x nodistro InRelease Ign:2 http://packages.linuxmint.com wilma InRelease Hit:3 http://security.ubuntu.com/ubuntu noble-security InRelease Hit:4 http://packages.linuxmint.com wilma Release Hit:5 http://archive.ubuntu.com/ubuntu noble InRelease Hit:6 http://archive.ubuntu.com/ubuntu noble-updates InRelease Hit:7 http://archive.ubuntu.com/ubuntu noble-backports InRelease Reading package lists... Pending systemupdates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 68537 9308/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 70688 9308/iobroker.js-co tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 991 10268 656/systemd-resolve tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5932 1/init tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4382 1/init tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 17830 2070/smbd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 17829 2070/smbd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 5521901 763892/cupsd tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 991 10266 656/systemd-resolve tcp6 0 0 :::3389 :::* LISTEN 124 9945 984/xrdp tcp6 0 0 ::1:631 :::* LISTEN 0 5521900 763892/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 12446 961/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 5934 1/init tcp6 0 0 :::111 :::* LISTEN 0 7288 1/init tcp6 0 0 :::139 :::* LISTEN 0 17828 2070/smbd tcp6 0 0 :::445 :::* LISTEN 0 17827 2070/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 81000 11179/io.admin.0 tcp6 0 0 :::21118 :::* LISTEN 1000 9084660 1255681/rustdesk udp 0 0 127.0.0.54:53 0.0.0.0:* 991 10267 656/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 991 10265 656/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4383 1/init udp 0 0 192.168.0.255:137 0.0.0.0:* 0 15151 2053/nmbd udp 0 0 192.168.0.109:137 0.0.0.0:* 0 15150 2053/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 15138 2053/nmbd udp 0 0 192.168.0.255:138 0.0.0.0:* 0 15153 2053/nmbd udp 0 0 192.168.0.109:138 0.0.0.0:* 0 15152 2053/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 15139 2053/nmbd udp 0 0 0.0.0.0:34046 0.0.0.0:* 1000 9081558 1255681/rustdesk udp 0 0 0.0.0.0:21119 0.0.0.0:* 1000 9085156 1255681/rustdesk udp 0 0 0.0.0.0:37634 0.0.0.0:* 1001 71829 9541/io.openknx.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 111 6051 704/avahi-daemon: r udp 0 0 0.0.0.0:46487 0.0.0.0:* 111 6053 704/avahi-daemon: r udp6 0 0 :::111 :::* 0 6216 1/init udp6 0 0 :::36853 :::* 111 6054 704/avahi-daemon: r udp6 0 0 :::5353 :::* 111 6052 704/avahi-daemon: r udp6 0 0 :::48714 :::* 1000 9246368 1278176/firefox *** Log File - Last 25 Lines *** 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.0b (ada6) data: {"65281":{"1":3015,"3":26,"4":17320,"5":40,"6":7,"10":0,"100":0}} options: {} meta:{"deviceIEEE":"0x00158d008b89863e","logger":"StatesController","state":{"state":""}} result:{} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.1c (ada6) candidates: [{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}] => payload {"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I03 (ada6) message received '{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}' from device 00158d008b89863e type 'MCCGQ11LM' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '100' from device 00158d008b89863e for 'Remaining battery in %, can take up to 24 hours before reported' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'false' from device 00158d008b89863e for 'Is open' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'true' from device 00158d008b89863e for 'Indicates if the contact is closed (= true) or open (= false)' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '26' from device 00158d008b89863e for 'Temperature of the device' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '39' from device 00158d008b89863e for 'Number of power outages' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '6' from device 00158d008b89863e for 'Indicates how many times the sensor was triggered (since last scheduled report)' 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: On geändert vonalias.0.ZigBee.Tuerkontakt_EG_Windfang.contactWert=true 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake geschossen" auf true senden 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake ohne Eingang" auf true senden 2026-03-10 18:50:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '16.717' seconds ago. 2026-03-10 18:52:07.278 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell 2026-03-10 18:52:07.278 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 22.48 2026-03-10 18:52:07.278 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell: 22.48 2026-03-10 18:52:07.289 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell 2026-03-10 18:52:07.289 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 37.96 2026-03-10 18:52:07.289 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell: 37.96 2026-03-10 18:55:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '316.717' seconds ago. 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauftemperatur Wärmeerzeuger (=Warmasser) geändert:37 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauf-SOLL-Temperatur Heizkreis geändert 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: value = 37============ Mark until here for C&P =============
iob diag has finished.
@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
warn: zigbee.0 (516192) ELEVATED:I02.0b (ada6)
warum hast du in zigbee das bugtracking an?
Das kostet Ressourcen -
Vielen Dank für den Hinweis.
Ich werde es ausschalten. -
Hab so eben nachgeschaut.
Ich finde nichts zum ausschalten.
-
Hier der Output:
Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Linux Mint 22 Static hostname: xxx Icon name: computer-desktop Chassis: desktop 🖥️ Kernel: Linux 6.8.0-101-generic Architecture: x86-64 Hardware Vendor: Lenovo Hardware Model: ThinkCentre M920q Firmware Version: M1UKT39A Firmware Date: Fri 2019-05-10 Firmware Age: 6y 10month OS is similar to: ubuntu debian model name : Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 18:57:39 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 CPU threads: 6 *** LIFE CYCLE STATUS *** Unknown release codenamed 'wilma'. Please check yourself if the Operating System is actively maintained. *** TIME AND TIMEZONES *** Local time: Tue 2026-03-10 18:57:39 CET Universal time: Tue 2026-03-10 17:57:39 UTC RTC time: Tue 2026-03-10 17:57:39 Time zone: Europe/Vienna (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': xxx HOME=/home/xxx GROUPS=xxx adm cdrom sudo dip plugdev users lpadmin sambashare iobroker User that is running 'js-controller': /home/iobroker/.diag.sh: line 495: [[: 9308 1278134 1278135 1278136: syntax error in expression (error token is "1278134 1278135 1278136") js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: true Display-Manager: * lightdm.service - Light Display Manager Desktop: cinnamon Session: x11 System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 33G 4.4G 25G 604M 4.6G 29G Swap: 2.1G 0B 2.1G Total: 35G 4.4G 27G Active iob-Instances: 8 31932 M total memory 4173 M used memory 3688 M active memory 2493 M inactive memory 24426 M free memory 536 M buffer memory 3828 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 18:57:40 up 1 day, 22:52, 1 user, load average: 0.38, 0.30, 0.18 Tasks: 301 total, 1 running, 293 sleeping, 7 stopped, 0 zombie %Cpu(s): 8.8 us, 5.9 sy, 0.0 ni, 85.3 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 31932.3 total, 24426.3 free, 4173.7 used, 4364.2 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 27758.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * casper-md5check.service loaded failed failed casper-md5check Verify Live ISO checksums Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on tmpfs tmpfs 3.2G 4.9M 3.2G 1% /run /dev/nvme0n1p3 ext4 234G 17G 205G 8% / tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/nvme0n1p2 vfat 512M 6.2M 506M 2% /boot/efi tmpfs tmpfs 3.2G 216K 3.2G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): mounted filesystem b1e492fb-7e6c-41da-9422-e5f7cd3f69eb ro with ordered data mode. Quota mode: none. [Sun Mar 8 20:05:39 2026] EXT4-fs (nvme0n1p3): re-mounted b1e492fb-7e6c-41da-9422-e5f7cd3f69eb r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p3 ext4 rw,relatime,errors=remount-ro |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/efi /dev/nvme0n1p2 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.4G /var/cache/apt/archives 621M /var/lib Archived and active journals take up 587.1M in the file system. /opt/iobroker/backups: 1.8M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 357M /opt/iobroker/iobroker-data/ 86M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 200M /opt/iobroker/iobroker-data/PV_logger.log 13M /opt/iobroker/iobroker-data/objects.jsonl 7.3M /opt/iobroker/iobroker-data/states.jsonl 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-CnpybLRW.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 18.19.1+dfsg-6ubuntu5 500 500 http://archive.ubuntu.com/ubuntu noble/universe amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: xxx xxx (version: 7.0.7, hostname: xxx , alive, uptime: 168113) Core adapters versions js-controller: 7.0.7 admin: 7.7.22 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : XXX - enabled + system.adapter.denon.0 : denon : XXX - enabled + system.adapter.discovery.0 : discovery : XXX - enabled system.adapter.ico-cloud.0 : ico-cloud : XXX - enabled + system.adapter.javascript.0 : javascript : XXX - enabled system.adapter.klf200.0 : klf200 : XXX - enabled + system.adapter.openknx.0 : openknx : XXX - enabled + system.adapter.pushover.0 : pushover : XXX - enabled + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : XXX - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : XXX - enabled, port: tcp://192.168.0.137:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.22 , installed 7.7.22 Adapter "alias-manager": 2.1.0 , installed 2.1.0 Adapter "denon" : 1.15.12 , installed 1.15.12 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ico-cloud" : 2.0.3 , installed 2.0.3 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "klf200" : 1.3.5 , installed 1.3.5 Adapter "openknx" : 0.9.0 , installed 0.9.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 1666 States: 1147 *** OS-Repositories and Updates *** Hit:1 https://deb.nodesource.com/node_22.x nodistro InRelease Ign:2 http://packages.linuxmint.com wilma InRelease Hit:3 http://security.ubuntu.com/ubuntu noble-security InRelease Hit:4 http://packages.linuxmint.com wilma Release Hit:5 http://archive.ubuntu.com/ubuntu noble InRelease Hit:6 http://archive.ubuntu.com/ubuntu noble-updates InRelease Hit:7 http://archive.ubuntu.com/ubuntu noble-backports InRelease Reading package lists... Pending systemupdates: 5 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 68537 9308/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 70688 9308/iobroker.js-co tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 991 10268 656/systemd-resolve tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5932 1/init tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 4382 1/init tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 17830 2070/smbd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 17829 2070/smbd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 5521901 763892/cupsd tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 991 10266 656/systemd-resolve tcp6 0 0 :::3389 :::* LISTEN 124 9945 984/xrdp tcp6 0 0 ::1:631 :::* LISTEN 0 5521900 763892/cupsd tcp6 0 0 ::1:3350 :::* LISTEN 0 12446 961/xrdp-sesman tcp6 0 0 :::22 :::* LISTEN 0 5934 1/init tcp6 0 0 :::111 :::* LISTEN 0 7288 1/init tcp6 0 0 :::139 :::* LISTEN 0 17828 2070/smbd tcp6 0 0 :::445 :::* LISTEN 0 17827 2070/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 81000 11179/io.admin.0 tcp6 0 0 :::21118 :::* LISTEN 1000 9084660 1255681/rustdesk udp 0 0 127.0.0.54:53 0.0.0.0:* 991 10267 656/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 991 10265 656/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 4383 1/init udp 0 0 192.168.0.255:137 0.0.0.0:* 0 15151 2053/nmbd udp 0 0 192.168.0.109:137 0.0.0.0:* 0 15150 2053/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 15138 2053/nmbd udp 0 0 192.168.0.255:138 0.0.0.0:* 0 15153 2053/nmbd udp 0 0 192.168.0.109:138 0.0.0.0:* 0 15152 2053/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 15139 2053/nmbd udp 0 0 0.0.0.0:34046 0.0.0.0:* 1000 9081558 1255681/rustdesk udp 0 0 0.0.0.0:21119 0.0.0.0:* 1000 9085156 1255681/rustdesk udp 0 0 0.0.0.0:37634 0.0.0.0:* 1001 71829 9541/io.openknx.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 111 6051 704/avahi-daemon: r udp 0 0 0.0.0.0:46487 0.0.0.0:* 111 6053 704/avahi-daemon: r udp6 0 0 :::111 :::* 0 6216 1/init udp6 0 0 :::36853 :::* 111 6054 704/avahi-daemon: r udp6 0 0 :::5353 :::* 111 6052 704/avahi-daemon: r udp6 0 0 :::48714 :::* 1000 9246368 1278176/firefox *** Log File - Last 25 Lines *** 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.0b (ada6) data: {"65281":{"1":3015,"3":26,"4":17320,"5":40,"6":7,"10":0,"100":0}} options: {} meta:{"deviceIEEE":"0x00158d008b89863e","logger":"StatesController","state":{"state":""}} result:{} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I02.1c (ada6) candidates: [{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}] => payload {"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true} 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I03 (ada6) message received '{"voltage":3015,"battery":100,"device_temperature":26,"power_outage_count":39,"trigger_count":6,"contact":true}' from device 00158d008b89863e type 'MCCGQ11LM' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '100' from device 00158d008b89863e for 'Remaining battery in %, can take up to 24 hours before reported' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'false' from device 00158d008b89863e for 'Is open' 2026-03-10 18:49:58.060 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated 'true' from device 00158d008b89863e for 'Indicates if the contact is closed (= true) or open (= false)' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '26' from device 00158d008b89863e for 'Temperature of the device' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '3015' from device 00158d008b89863e for 'Voltage of the battery in millivolts' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '39' from device 00158d008b89863e for 'Number of power outages' 2026-03-10 18:49:58.061 - warn: zigbee.0 (516192) ELEVATED:I04 (ada6) value generated '6' from device 00158d008b89863e for 'Indicates how many times the sensor was triggered (since last scheduled report)' 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: On geändert vonalias.0.ZigBee.Tuerkontakt_EG_Windfang.contactWert=true 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake geschossen" auf true senden 2026-03-10 18:49:58.071 - warn: javascript.0 (402228) script.js._Zigbee_Tür_und_Fensterkontakte: Alle Zustände im Soll --> KNX Telegramm "Alle Kontake ohne Eingang" auf true senden 2026-03-10 18:50:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '16.717' seconds ago. 2026-03-10 18:52:07.278 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell 2026-03-10 18:52:07.278 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 22.48 2026-03-10 18:52:07.278 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.temperature -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Temperatur_Aktuell: 22.48 2026-03-10 18:52:07.289 - error: javascript.0 (402228) script.js._Zigbee_KNX: ----> In der ON-Function: finalAliasID=alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -- finalKnxID=openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell 2026-03-10 18:52:07.289 - warn: javascript.0 (402228) script.js._Zigbee_KNX: currentVal = 37.96 2026-03-10 18:52:07.289 - info: javascript.0 (402228) script.js._Zigbee_KNX: alias.0.ZigBee.Temperatur_Schlafzimmer.humidity -> Sende an KNX openknx.0.Heizung_und_Temp.OG.HZ_-_SZ_-_Temperatur_Zigbee_-_Humidity_Aktuell: 37.96 2026-03-10 18:55:14.771 - warn: zigbee.0 (516192) DeviceAvailability:ELEVATED: Non-pingable device 0x00158d008b89863e lumi.sensor_magnet.aq2 was last seen '316.717' seconds ago. 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauftemperatur Wärmeerzeuger (=Warmasser) geändert:37 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauf-SOLL-Temperatur Heizkreis geändert 2026-03-10 18:56:29.207 - error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: value = 37============ Mark until here for C&P =============
iob diag has finished.
@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
Statt den hostname so akribisch zu verbergen würde ich eher empfehlen die Kiste auf Stand zu halten:Pending systemupdates: 5
sowie den Desktop auszuschalten. Wäre aus Sicherheitsaspekten wesentlich sinnvoller...
Ansonsten langweilt sich die Kiste eher. Auch
Objects and States Please stand by - This may take a while Objects: 1666 States: 1147ist äußerst niedrig. Da hatte ich vermutet, dass da wesentlich mehr aufläuft. Aber das System rennt ja auch noch nicht so lange.
Dein Logging der Skripte würde ich mir mal anschauen. Du willst nicht jede minimale Änderung im Log haben sondern nur relevante Meldungen.
Und die dann auch richtig klassifiziert. Warum sollte das z. B. ein Fehler sein, der im Log aufschlägt?:error: javascript.0 (402228) script.js._Heizkreis_Vorlauftemperatur: CALLBACK: Vorlauf-SOLL-Temperatur Heizkreis geändert
-
Hab so eben nachgeschaut.
Ich finde nichts zum ausschalten.@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
Hab so eben nachgeschaut.
Ich finde nichts zum ausschalten.die Frage war ja auch, warum du das aktiviert hast!
Außerdem ist das keine Logstufe der Instanz, sondern ein Bugtracker zum Gerät!
bei dir
@Automatisierer-0 sagte in OpenKNX: Senden dauert ca. 10 Sekunden:
device 00158d008b89863e
ob du noch weitere aktiviert hast kann ich bei 25 Meldungen in 3 Minuten leider nicht erkennen.
Auf jeden Fall verbraucht so intensives Logging auch erheblich Ressourcen.
-
Hallo,
Ich verwende den OpenKNX Adapter in der Version 0.9.0.
Zu Beginn funktioniert alles bestens.
Nach ungefähr 2 Monaten tritt der Fehler auf.
Es dauert ungefähr 10 Sekunden bis ein Telegramm auf den KNX Bus gesendet wird.
Ich sende mit: setState(finalKnxID, currentVal, false);Zur Kontrolle mache ich danach: console.info('Senden an KNX') -> Diese Zeile erscheint sofort im LOG
Das Telegramm auf den Bus kommt aber erst nach ca. 10 Sekunden an.
Ich habe keine hohe Buslast.
Ich habe einen Neustart des Adapter gemacht und dannach werden alle Telegramm unmittelbar wieder gesendet.@Automatisierer-0 teste mal die GitHub version
470
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge