SONOFF NSPanel mit Lovelace UI

timredlich

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.061 UFS: FlashFS mounted with 288 kB free
00:00:00.077 CFG: Loaded from File, Count 1112
00:00:00.084 QPC: Count 1
00:00:00.159 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.182 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.446 NXP: Initializing Driver
00:00:00.452 BRY: Successfully loaded 'autoexec.be'
00:00:01.177 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as NSPanel-2488...
00:00:03.829 WIF: Connected
13:12:54.049 HTP: Web server active on NSPanel-2488 with IP address 192.168.2.22
13:12:55.049 MQT: Attempting connection...
13:12:55.079 MQT: Connected
13:12:55.084 MQT: SmartHome/NSPanel/tele/LWT = Online (retained)
13:12:55.086 MQT: SmartHome/NSPanel/cmnd/POWER = 
13:12:55.093 MQT: SmartHome/NSPanel/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/NSPanel_fb/","GroupTopic":"SmartHome/tasmotas/cmnd/"}}
13:12:55.108 MQT: SmartHome/NSPanel/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-2488","IPAddress":"192.168.2.22","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
13:12:55.122 MQT: SmartHome/NSPanel/tele/INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":149}}
13:12:55.137 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.144 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.147 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER2":"OFF"}
13:12:55.148 MQT: SmartHome/NSPanel/stat/POWER2 = OFF
13:12:55.432 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.437 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.508 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:55.534 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.538 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.597 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:55.632 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.634 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.700 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:57.288 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:57.291 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:57.357 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:57.939 QPC: Reset
13:12:59.961 MQT: SmartHome/NSPanel/tele/STATE = {"Time":"2025-12-26T13:12:59","Uptime":"0T00:00:09","UptimeSec":9,"Heap":130,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22"}
13:13:00.012 MQT: SmartHome/NSPanel/tele/SENSOR = {"Time":"2025-12-26T13:12:59","Switch1":"OFF","Switch2":"OFF","ANALOG":{"Temperature1":-0.0},"TempUnit":"C"}
13:13:49.734 MQT: SmartHome/NSPanel/stat/RESULT = {"DeviceName":"Tasmota"}
13:13:49.837 MQT: SmartHome/NSPanel/stat/STATUS0 = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota",""],"Topic":"NSPanel","ButtonTopic":"0","Power":"00","PowerLock":"00","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[2,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.bin","RestartReason":"Vbat power on reset","Uptime":"0T00:00:59","StartupUTC":"2025-12-26T12:12:50","Sleep":50,"CfgHolder":4617,"BootCount":149,"BCResetTime":"2023-09-19T11:22:59","SaveCount":1113},"StatusFWR":{"Version":"15.2.0(release-nspanel)","BuildDateTime":"2025-12-12T11:01:02","Core":"3.3.4","SDK":"5.3.4.251205","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.0","CR":"431/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"FileLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Dreamnet",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":2082,"Free":797,"Heap":121,"StackLowMark":3,"PsrMax":2048,"PsrFree":2025,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","9F9AD7DF","0015A001","B7F7BFCF","05DA9BC4","E0360DC7","480840D2","20200000","D4BC482D","810A80F1","00000814"],"Drivers":"1,2,!3,!4,!5,7,!8,9,10,11,12,!14,!16,!17,!20,!21,24,26,!27,29,!34,!35,38,50,52,!59,!60,62,!63,!66,!67,!68,!73,!75,82,!86,!87,!88,!91,!121","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,62,65,69,76,77,82,89"},"StatusNET":{"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22","Gateway":"192.168.0.1","Subnetmask":"255.255.252.0","DNSServer1":"192.168.0.1","DNSServer2":"fd10:b295:164b:0:3e37:12ff:fe21:7ba6","Mac":"3C:E9:0E:85:E9:B8","IP6Global":"fdcc:f120:56a7:0:3ee9:eff:fe85:e9b8","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.0.1","DNSServer2":"fd10:b295:164b:0:3e37:12ff:fe21:7ba6","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":16.0},"StatusMQT":{"MqttHost":"192.168.0.12","MqttPort":1887,"MqttClientMask":"NSPanel","MqttClient":"NSPanel","MqttUser":"mqttredlich","MqttCount":1,"MqttTLS":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"2025-12-26T12:13:49Z","Local":"2025-12-26T13:13:49","StartDST":"2025-03-30T02:00:00","EndDST":"2025-10-26T03:00:00","Timezone":"+01:00","Sunrise":"08:43","Sunset":"16:58"},"StatusSNS":{"Time":"2025-12-26T13:13:49","Switch1":"OFF","Switch2":"OFF","ANALOG":{"Temperature1":0.0},"TempUnit":"C"},"StatusSTS":{"Time":"2025-12-26T13:13:49","Uptime":"0T00:00:59","UptimeSec":59,"Heap":119,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":24,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22"}}
13:13:50.258 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.394 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.439 MQT: SmartHome/NSPanel/tele/RESULT = {"nlui_driver_version":"10"}
13:13:50.518 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.568 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.614 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.676 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:59.378 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}

timredlich

Ich habe auch schon versucht die Firmware neu zu Flashen in der Console mit "FlashNextion http://nspanel.pky.eu/lui-release.tft" es gibt aber darauf keine Flash aktion.

13:18:09.211 CMD: FlashNextion http://nspanel.pky.eu/lui-release.tft
13:18:09.230 MQT: SmartHome/NSPanel/stat/RESULT = {"FlashNextion":"Done"}
13:18:09.276 FLH: host: nspanel.pky.eu, port: 80, get: /lui-release.tft
13:18:09.729 MQT: SmartHome/NSPanel/stat/RESULT = {"T1":0,"T2":0,"T3":0,"T4":0,"T5":0,"T6":0,"T7":0,"T8":0}
13:18:09.747 MQT: SmartHome/NSPanel/stat/RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
13:18:59.402 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}

TT-Tom

@timredlich
Prüfe bitte den Berry Driver noch einmal, ggf neu schreiben.
https://github.com/joBr99/nspanel-lovelace-ui/wiki/iobroker---Basisinstallation#3-berry-treiber-installieren

Edit:

flashpfad: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft

timredlich

Habe den Berry Driver neu installiert. Neu gestartet . Keine Verbesserung. Versucht den tft Treiber neu zu flashen. Keine reaktion. Habe dann ein Downgrade auf tasmota 12.1.1 gemacht. Berry Driver neu installiert. Versucht ein Downgrade des TFT Treibers auf 5.0.0 zu machen. keine Reaktion, kein Download, nichts. Gibt es die möglichkeit das Gerät komplett zu Reseten?

14:04:23.699 CMD: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.0.tft
14:04:23.715 MQT: SmartHome/NSPanel/stat/RESULT = {"FlashNextionAdv":"Done"}
14:04:23.772 FLH: host: nspanel.de, port: 80, get: /nspanel-v5.0.0.tft

ilovegym

gib mal in der console ein "reset 4" - da wird alles, bis auf die Netzwerksettings, zurueck gesetzt, danach nochmal von vorne anfangen.. ist aber schon komisch..

timredlich

So ich glaub jetzt ist das Panel ganz kaputt. Ich habe einen "Reset 4" gemacht, dazu nochmal die Reset Taste am Gerät selbst gedrückt. Danach blieb das Display Schwarz. Tasmota ist immer noch zu erreichen, also hab ich alles neu eingerichtet und habe erneut versucht den Display Treiber zu flashen. Aber dies macht er wieder nicht. Und wie gesagt, Display bleibt schwarz. Ich glaube ich hab hier nen neuen Briefbeschwerer.

00:00:00.002 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.021 UFS: FlashFS mounted with 288 kB free
00:00:00.028 CFG: Loaded from File, Count 14
00:00:00.035 QPC: Count 3
00:00:00.085 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.100 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.261 NXP: Initializing Driver
00:00:00.268 BRY: Successfully loaded 'autoexec.be'
00:00:02.000 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as tasmota-85E9B8-2488...
00:00:04.852 WIF: Connected
15:38:47.076 HTP: Web server active on tasmota-85E9B8-2488 with IP address 192.168.3.33
15:38:48.087 MQT: Attempting connection...
15:38:48.537 MQT: Connected
15:38:48.541 MQT: tele/tasmota_85E9B8/LWT = Online (retained)
15:38:48.543 MQT: cmnd/tasmota_85E9B8/POWER = 
15:38:48.548 MQT: tele/tasmota_85E9B8/INFO1 = {"Info1":{"Module":"ESP32-DevKit","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/DVES_85E9B8_fb/","GroupTopic":"cmnd/tasmotas/"}}
15:38:48.563 MQT: tele/tasmota_85E9B8/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33","IP6Global":"2a03:7500:704:8c00:3ee9:eff:fe85:e9b8","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
15:38:48.587 MQT: tele/tasmota_85E9B8/INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":8}}
15:38:49.413 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.487 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.513 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.578 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.613 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.684 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.964 QPC: Reset
15:38:50.665 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:50.783 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:52.989 MQT: tele/tasmota_85E9B8/STATE = {"Time":"2025-12-26T15:38:52","Uptime":"0T00:00:10","UptimeSec":10,"Heap":130,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"},"Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33"}
15:38:59.226 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:39:54.517 CMD: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft
15:39:54.530 MQT: stat/tasmota_85E9B8/RESULT = {"FlashNextionAdv":"Done"}
15:39:54.571 FLH: host: nspanel.de, port: 80, get: /nspanel-v5.0.2.tft
15:39:55.534 MQT: stat/tasmota_85E9B8/RESULT = {"T1":0,"T2":0,"T3":0,"T4":0,"T5":0,"T6":0,"T7":0,"T8":0}
15:39:55.543 MQT: stat/tasmota_85E9B8/RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
15:39:59.216 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:40:59.300 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:41:59.277 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:42:59.358 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:43:52.980 MQT: tele/tasmota_85E9B8/STATE = {"Time":"2025-12-26T15:43:52","Uptime":"0T00:05:10","UptimeSec":310,"Heap":119,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":22,"Objects":225},"Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"},"Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33"}
15:43:59.303 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}

ilovegym

Da fehlt einfach nur der berry treiber und die firmware vom display.. hast du das panel dann wieder neu mit den options gesetzt damit es weiss, dass es auch nspanel ist? Bist du das Tutorial von Anfang an durchgegangen?

ticaki

@timredlich
Könntest du deine Handlung auf das beschränken was empfohlen wird ohne auf z.B. eine fehlerhafte Tasmotaversion downzugraden... ist nur ein Vorschlag...

Es gibt ein Kommunikationsproblem - heißt Berry ist nicht da oder MQTT-Pfad im Skript ist falsch, oder Skript ist nicht aktiv.

EDIT: wobei Berry da sein müsste, von dem kommt das customsend: done im log

EDIT2:
Wobei das log vom Skript auf debug (skript auf debug stellen, nicht javascript adapter) helfen könnte das problem zu erkennen.

TT-Tom

@ticaki

was mir fehlt ist die Start-Sequenz.

MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}

die kommt vom TFT, ohne die gehts nicht weiter.

ticaki

@TT-Tom

Hm nachdem ich mir das log mal angesehen anstatt überflogen habe fällt mir

15:38:50.665 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}

15:39:54.517 CMD: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft

auf

Wieso ist da ein FlashNextionAdv0 als kommando
und wieso Power NaN
Der nan könnte durch fehlendes Template sein.

TT-Tom

@ticaki
ich vermute mal, alles versucht ohne die Reihenfolge einzuhalten. Wie @ilovegym schon schrieb, mal einfach nach Anleitung neu installieren.

warten wir auf die Reaktion von @timredlich

timredlich

OK morgen probiere ich es nochmal. Melde mich

timredlich

Guten Morgen, tatsächlich hatte ich nach dem Reset vergessen das Template einzutragen. Dies habe ich nachgeholt. autoexec.de habe ich danach nochmal neu installiert. Habe dann versucht zu Flashen. Ging wieder nicht. Die TFT Firmware wurde anscheinend auch nicht beim Reset gelöscht und ist noch vorhanden. Das mein Display Schwarz war, war auf einen Wackelkontakt am Display zurückzuführen. Einmal anpressen hat hier wieder zum gewohnten "Waiting for Content" geführt. Ich hab die Pfade im Skript nochmal überprüft. müsste so stimmen. Im IObroker im Datenpunkt CustomSend wird die aktuelle Uhrzeit übergeben.

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.038 UFS: FlashFS mounted with 288 kB free
00:00:00.051 CFG: Loaded from File, Count 39
00:00:00.058 QPC: Count 1
00:00:00.120 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.140 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.345 NXP: Initializing Driver
00:00:00.352 BRY: Successfully loaded 'autoexec.be'
00:00:01.075 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as NSPanelK-che...
00:00:03.727 WIF: Connected
08:38:44.026 HTP: Web server active on NSPanelK-che with IP address 192.168.3.33
08:38:44.938 MQT: Attempting connection...
08:38:44.967 MQT: Connected
08:38:44.971 MQT: mqttredlich/tele/LWT = Online (retained)
08:38:44.973 MQT: mqttredlich/cmnd/POWER = 
08:38:44.977 MQT: mqttredlich/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/NSPanelK_che-85E9B8_fb/","GroupTopic":"mqttredlich/cmnd/"}}
08:38:44.992 MQT: mqttredlich/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanelK-che","IPAddress":"192.168.3.33","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
08:38:45.006 MQT: mqttredlich/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":24}}
08:38:45.023 MQT: mqttredlich/stat/RESULT = {"POWER1":"OFF"}
08:38:45.026 MQT: mqttredlich/stat/POWER1 = OFF
08:38:45.028 MQT: mqttredlich/stat/RESULT = {"POWER2":"OFF"}
08:38:45.030 MQT: mqttredlich/stat/POWER2 = OFF
08:38:45.296 MQT: mqttredlich/stat/RESULT = {"POWER1":"OFF"}
08:38:45.298 MQT: mqttredlich/stat/POWER1 = OFF
08:38:47.550 MQT: mqttredlich/stat/RESULT = {"POWER1":"OFF"}
08:38:47.554 MQT: mqttredlich/stat/POWER1 = OFF
08:38:48.021 QPC: Reset
08:38:48.965 MQT: mqttredlich/tele/STATE = {"Time":"2025-12-27T08:38:48","Uptime":"0T00:00:08","UptimeSec":8,"Heap":129,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":28,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":225},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":66,"Signal":-67,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanelK-che","IPAddress":"192.168.3.33"}
08:38:49.014 MQT: mqttredlich/tele/SENSOR = {"Time":"2025-12-27T08:38:48","ANALOG":{"Temperature1":-2.8},"TempUnit":"C"}

timredlich

Wenn ich das Skript auf Debugen stelle bekomme ich im IOBroker log folgend Meldung

script.js.NSPanel.Panel_Kueche: setForeignState(id=0_userdata.0.NSPanel.1ScreensaverInfo.weatherForecast, state={"val":false,"ack":true,"ts":1766821216001,"q":0,"from":"system.adapter.javascript.0","lc":1766821216001,"c":"script.js.NSPanel.Panel_Kueche"}) - wurde nicht ausgeführt, während der Debug-Modus aktiv ist

timredlich

2025-12-27 08:43:38.226 - info: admin.0 (693) ==> Connected system.user.tim from ::ffff:192.168.1.10
2025-12-27 08:43:46.306 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Stopping script
2025-12-27 08:43:48.048 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Compiling TypeScript source
2025-12-27 08:43:48.372 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: source code did not change, using cached compilation result...
2025-12-27 08:43:48.382 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: findLocaleServMenu: service_pages - de-DE -> Service Seiten
2025-12-27 08:43:48.382 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Licht - de-DE
2025-12-27 08:43:48.382 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Licht 2 - de-DE
2025-12-27 08:43:48.383 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Licht 3 - de-DE
2025-12-27 08:43:48.383 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Abfallkalender - de-DE
2025-12-27 08:43:48.384 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Geräte - de-DE
2025-12-27 08:43:48.384 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Photovoltaik Heute - de-DE
2025-12-27 08:43:48.384 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Robi Wohnzimmer - de-DE
2025-12-27 08:43:48.385 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Robi Dachgeschoss - de-DE
2025-12-27 08:43:48.385 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function findLocaleServMenu: missing translation: Layout - de-DE
2025-12-27 08:43:48.386 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: --- start of NsPanelTs: 0_userdata.0.NSPanel.1 ---
2025-12-27 08:43:48.386 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Number of weatherAdapterInstance: 0
2025-12-27 08:43:48.391 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: setObjects enabled - create Alias Channels possible
2025-12-27 08:43:48.391 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: weather alias for pirate-weather.0. already exists
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: dimmode~8~100~6371~65535
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Background rgb_dec565: 6371
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Dimmode=true
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: dimmode~8~100~6371~65535
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode -> Day NSPanel.Payload: dimmode~8~100
2025-12-27 08:43:48.392 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Requesting locales
2025-12-27 08:43:48.394 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Requesting locales Service Menu
2025-12-27 08:43:48.395 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: get_current_tasmota_ip_address: 192.168.3.33
2025-12-27 08:43:48.396 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: registered 41 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Background rgb_dec565: 6371
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Dimmode=true
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: dimmode~8~100~6371~65535
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode -> Day NSPanel.Payload: dimmode~8~100
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Background rgb_dec565: 6371
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode Dimmode=true
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: dimmode~8~100~6371~65535
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function ScreensaverDimmode -> Day NSPanel.Payload: dimmode~8~100
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: time~08:43
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: function SendToPanel val-payload: date~Samstag, 27. Dezember 2025
2025-12-27 08:43:48.398 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Requesting tasmota status0
2025-12-27 08:43:48.399 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: get_current_tasmota_ip_address: 192.168.3.33
2025-12-27 08:43:48.399 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Check-Updates
2025-12-27 08:43:48.399 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Already the latest Tasmota version on NSPanel
2025-12-27 08:43:48.399 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Already the latest Berry driver on NSPanel
2025-12-27 08:43:48.399 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: No Updates for NSPanel available
2025-12-27 08:43:48.410 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: 2.1 W
2025-12-27 08:43:48.435 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Desired TFT Firmware: 59 / v5.0.2
2025-12-27 08:43:48.456 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Debug mode disabled
2025-12-27 08:43:49.082 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: hidden Cards disabled
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: Start MQTT-Port-Check -------------------------------------
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- admin.0 - 8081
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- deyeidc.0 - 8899
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- mihome-vacuum.0 - 5432
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- mihome-vacuum.1 - 5432
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- mqtt.0 - 1887
2025-12-27 08:43:50.093 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- shelly.0 - 1882
2025-12-27 08:43:50.094 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- sonoff.0 - 1883
2025-12-27 08:43:50.094 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- web.0 - 8082
2025-12-27 08:43:50.094 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: -- zigbee.0 - tcp
2025-12-27 08:43:50.094 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: - MQTT-Port-Check OK: Instance of Adapter: mqtt.0 is running on Port:1887
2025-12-27 08:43:50.094 - info: javascript.0 (738) script.js.NSPanel.Panel_Kueche: End MQTT-Port-Check ---------------------------------------
2025-12-27 08:43:52.185 - info: admin.0 (693) <== Disconnect system.user.tim from ::ffff:192.168.1.10 javascript

TT-Tom

@timredlich

nicht den Debug Modus vom Javascript Adapter, sondern vom Script.
Also im Script die Zeile auf true setzen und neu starten.

// DE: liefert bei true detailliertere Meldundgen im Log.
// EN: if true, provides more detailed messages in the log.
var Debug: boolean = false;

hast du die TFT -Firmware mit den Befehl geflasht?

FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft

timredlich

Ja ich hatte genau mit diesem Befehl versucht zu flashen. Ich hatte auch im Script auf true gesetzt allerdings auch noch im IObroker. Im Iobroker hab ich es dann wieder deaktiviert. ich bekomme keine fehlermeldung im Protokol oder in der Tasmota konsole. Bin jetzt kein Experte aber immerhin hab ich es ja schon mal zum laufen bekommen und es lief 2 Jahre lang.

iobroker.2025-12-27.log

TT-Tom · iobroker.2025-12-27.log

@timredlich

erstmal unauffällig bis auf die MQTT Einstellungen
zeige mal bitte deine mqtt Einstellungen im Script.

// DE: Anpassen an die Verzeichnisse der MQTT-Adapter-Instanz
// EN: Adapt to the MQTT adapter instance directories
const NSPanelReceiveTopic: string = 'mqtt.0.SmartHome.NSPanel_1.tele.RESULT';
const NSPanelSendTopic: string = 'mqtt.0.SmartHome.NSPanel_1.cmnd.CustomSend';

und passend dazu die Tasmota Einstellung MQTT

bitte das log aus dem Script Fenster posten das reicht erstmal. dein Log war etwas zuviel. hoffe habe nix übersehen.

timredlich

Das problem ist, das in der Log ein Paar einträge drin sind, die jede Formatierung sprengen.

Ich weis das der Mqtt pfad nicht optimal ist, aber es müsste ja trotzdem gehen.
Würde es ändern wenn ich nicht glauben würde das am Gerät irgendwas kaputt ist.

Skript.log

TT-Tom

@timredlich
Bin unterwegs und nur am Handy. Aber deine MQTT Einstellung von Script und Tasmota sind nicht konform. Sie dir das im Wiki nochmal an.
https://github.com/joBr99/nspanel-lovelace-ui/wiki/NSPanel-Starthilfe-FAQ#waiting-for-content---es-geht-nicht-weiter

Community Forum

NEWS

SONOFF NSPanel mit Lovelace UI

Support us

1.0k

32.6k

82.0k

1.3m