SONOFF NSPanel mit Lovelace UI

Maragon

Ok danke, dann bringe ich das mal noch in Ordnung :)

nullfreizeit

Wie kann ich nochmal per Script/Datenpunkt auf eine gewisse Seite schalten? Finde den Punkt auch nach Suche nicht per Google oder auf der Github Seite. Danke

TT-Tom

@nullfreizeit

Du kannst diesen Datenpunkt nutzen
0_userdata.0.NSPanel.PageNavi
Du musst Typ und id angeben

nullfreizeit

@TT-Tom sagte in SONOFF NSPanel mit Lovelace UI:

@nullfreizeit

Du kannst diesen Datenpunkt nutzen
0_userdata.0.NSPanel.PageNavi
Du musst Typ und id angeben

Danke - das war es. :-)

timredlich

Frohe Weihnachten,
ich habe seit dem 24 ein Massives Problem mit meinem NS Panel. Ich wollte eigenlich nur die IPAdresse des Panels wechsels, da ich mein Netzwerk etwas umstruckturiert habe. Seit dem funktioniert mein Panel nicht mehr und ich habe keine Ahnung wieso. Es zeigt immer an "Waitig for Content". Egal was ich auch mache. Ich nutze den IOBroker. Der MQTT Adapter ist verbunden und läuft. Tasmota ist die aktuelle Version 15.2.0 . Skript version TypeScript v5.0.2.1 . Berry Driver 10 . TFT 59. Hat jemand ne Idee was das Problem sein könnte. Ich bekomme keine Fehlermeldung vom Script oder Mqtt Adapter was auf einen Fehler hindeutet.

ilovegym

was steht denn im log von Tasmota - also im nspanel auf "tools" und dann "konsole" anklicken, das waere interessant.. mal den mqtt-adapter neu gestartet und das Panel rebooted?

timredlich

sagte in SONOFF NSPanel mit Lovelace UI:

Frohe Weihnachten,
ich habe seit dem 24 ein Massives Problem mit meinem NS Panel. Ich wollte eigenlich nur die IPAdresse des Panels wechsels, da ich mein Netzwerk etwas umstruckturiert habe. Seit dem funktioniert mein Panel nicht mehr und ich habe keine Ahnung wieso. Es zeigt immer an "Waitig for Content". Egal was ich auch mache. Ich nutze den IOBroker. Der MQTT Adapter ist verbunden und läuft. Tasmota ist die aktuelle Version 15.2.0 . Skript version TypeScript v5.0.2.1 . Berry Driver 10 . TFT 59. HAt jemand ne Idee was das Problem sein könnte.

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.052 UFS: FlashFS mounted with 288 kB free
00:00:00.065 CFG: Loaded from File, Count 1101
00:00:00.072 QPC: Count 1
00:00:00.140 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.162 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.394 NXP: Initializing Driver
00:00:00.401 BRY: Successfully loaded 'autoexec.be'
00:00:01.296 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as NSPanel-2488...
00:00:03.955 WIF: Connected
00:00:04.219 HTP: Web server active on NSPanel-2488 with IP address 192.168.2.22
11:12:26.169 MQT: Attempting connection...
11:12:26.214 MQT: TLS connection error: 0
11:12:26.215 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 10 sec
11:12:28.986 QPC: Reset
11:12:38.426 MQT: Attempting connection...
11:12:38.463 MQT: TLS connection error: 0
11:12:38.464 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 20 sec
11:12:59.427 MQT: Attempting connection...
11:12:59.462 MQT: TLS connection error: 0
11:12:59.462 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 30 sec
11:13:21.121 RSL: RESULT = {"POWER2":"ON"}
11:13:21.122 RSL: POWER2 = ON
11:13:21.321 RSL: RESULT = {"POWER2":"OFF"}
11:13:21.322 RSL: POWER2 = OFF
11:13:21.571 RSL: RESULT = {"POWER1":"ON"}
11:13:21.572 RSL: POWER1 = ON
11:13:22.242 RSL: RESULT = {"POWER1":"OFF"}
11:13:22.243 RSL: POWER1 = OFF
11:13:22.774 RSL: RESULT = {"POWER1":"ON"}
11:13:22.775 RSL: POWER1 = ON
11:13:22.824 RSL: RESULT = {"POWER1":"OFF"}
11:13:22.824 RSL: POWER1 = OFF
11:13:23.360 RSL: RESULT = {"POWER1":"ON"}
11:13:23.361 RSL: POWER1 = ON
11:13:23.411 RSL: RESULT = {"POWER1":"OFF"}
11:13:23.412 RSL: POWER1 = OFF
11:13:24.063 RSL: RESULT = {"POWER2":"ON"}
11:13:24.064 RSL: POWER2 = ON
11:13:24.165 RSL: RESULT = {"POWER2":"OFF"}
11:13:24.166 RSL: POWER2 = OFF
11:13:24.263 RSL: RESULT = {"POWER2":"ON"}
11:13:24.264 RSL: POWER2 = ON
11:13:24.312 RSL: RESULT = {"POWER2":"OFF"}
11:13:24.313 RSL: POWER2 = OFF
11:13:24.413 RSL: RESULT = {"POWER2":"ON"}
11:13:24.414 RSL: POWER2 = ON
11:13:24.513 RSL: RESULT = {"POWER2":"OFF"}
11:13:24.514 RSL: POWER2 = OFF
11:13:24.613 RSL: RESULT = {"POWER2":"ON"}
11:13:24.614 RSL: POWER2 = ON
11:13:24.662 RSL: RESULT = {"POWER2":"OFF"}
11:13:24.663 RSL: POWER2 = OFF
11:13:24.712 RSL: RESULT = {"POWER2":"ON"}
11:13:24.713 RSL: POWER2 = ON
11:13:25.186 RSL: RESULT = {"POWER2":"OFF"}
11:13:25.187 RSL: POWER2 = OFF
11:13:25.307 RSL: RESULT = {"POWER1":"ON"}
11:13:25.308 RSL: POWER1 = ON
11:13:25.358 RSL: RESULT = {"POWER1":"OFF"}
11:13:25.359 RSL: POWER1 = OFF
11:13:25.457 RSL: RESULT = {"POWER1":"ON"}
11:13:25.458 RSL: POWER1 = ON
11:13:25.558 RSL: RESULT = {"POWER1":"OFF"}
11:13:25.559 RSL: POWER1 = OFF
11:13:25.607 RSL: RESULT = {"POWER1":"ON"}
11:13:25.608 RSL: POWER1 = ON
11:13:25.707 RSL: RESULT = {"POWER1":"OFF"}
11:13:25.708 RSL: POWER1 = OFF
11:13:25.758 RSL: RESULT = {"POWER1":"ON"}
11:13:25.758 RSL: POWER1 = ON
11:13:26.229 RSL: RESULT = {"POWER1":"OFF"}
11:13:26.230 RSL: POWER1 = OFF
11:13:30.400 MQT: Attempting connection...
11:13:30.432 MQT: TLS connection error: 0
11:13:30.433 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 40 sec
11:14:11.402 MQT: Attempting connection...
11:14:11.431 MQT: TLS connection error: 0
11:14:11.432 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 50 sec
11:15:02.401 MQT: Attempting connection...
11:15:02.439 MQT: TLS connection error: 0
11:15:02.439 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 60 sec
11:16:03.428 MQT: Attempting connection...
11:16:03.459 MQT: TLS connection error: 0
11:16:03.460 MQT: Connect failed to 192.168.0.12:1887, rc -2. Retry in 70 sec

Ok Jetzt sehe ich was los ist. Das Panel hat wohl Probleme auf den IOBroker zuzugreifen. Komischerweise ist der Mqtt Adapter Grün und es kommen auch werte an. Zur info Ich habe eine Subnetzmaske von 255.255.252.0 (Cidr: 22)

ilovegym

dein panel kann nicht mit dem mqtt sprechen, da ist tls eingeschaltet.. stimmt denn die config und der port dort noch? hast du vielleicht mehr geaendert als nur die IP des Panels im Router ? oder was hast du denn gemacht? :)

timredlich

Ok. MeinFehler. Hatte es versuchsweise in Tasmota aktiviert. Die Ausgabe sieht jetzt anders aus.

timredlich

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.035 UFS: FlashFS mounted with 288 kB free
00:00:00.045 CFG: Loaded from File, Count 1108
00:00:00.052 QPC: Count 1
00:00:00.112 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.132 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.330 NXP: Initializing Driver
00:00:00.337 BRY: Successfully loaded 'autoexec.be'
00:00:01.199 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as NSPanel-2488...
00:00:03.858 WIF: Connected
11:25:40.073 HTP: Web server active on NSPanel-2488 with IP address 192.168.2.22
11:25:41.068 MQT: Attempting connection...
11:25:41.101 MQT: Connected
11:25:41.105 MQT: SmartHome/NSPanel/tele/LWT = Online (retained)
11:25:41.107 MQT: SmartHome/NSPanel/cmnd/POWER =
11:25:41.112 MQT: SmartHome/NSPanel/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/NSPanel_fb/","GroupTopic":"SmartHome/tasmotas/cmnd/"}}
11:25:41.127 MQT: SmartHome/NSPanel/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-2488","IPAddress":"192.168.2.22","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
11:25:41.156 MQT: SmartHome/NSPanel/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":145}}
11:25:41.160 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
11:25:41.172 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
11:25:41.173 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER2":"OFF"}
11:25:41.175 MQT: SmartHome/NSPanel/stat/POWER2 = OFF
11:25:41.458 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
11:25:41.463 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
11:25:41.537 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:25:41.559 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
11:25:41.564 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
11:25:41.626 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:25:41.658 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
11:25:41.660 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
11:25:41.731 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:25:43.285 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
11:25:43.289 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
11:25:43.380 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:25:43.953 QPC: Reset
11:25:46.064 MQT: SmartHome/NSPanel/tele/STATE = {"Time":"2025-12-26T11:25:46","Uptime":"0T00:00:10","UptimeSec":10,"Heap":128,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":37,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22"}
11:25:46.115 MQT: SmartHome/NSPanel/tele/SENSOR = {"Time":"2025-12-26T11:25:46","Switch1":"OFF","Switch2":"OFF","ANALOG":{"Temperature1":-0.2},"TempUnit":"C"}
11:25:59.690 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:26:59.695 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:27:59.484 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
11:28:59.474 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}

ticaki

Das letzte Log sieht aus als wenn es jetzt gehen würde.

ilovegym

@timredlich sagte in SONOFF NSPanel mit Lovelace UI:

11:25:41.068 MQT: Attempting connection...
11:25:41.101 MQT: Connected
11:25:41.105 MQT: SmartHome/NSPanel/tele/LWT = Online (retained)

Genau, so soll es aussehen, MQTT connected und LWT online - damit ist die Verbindung da, und das Panel sollte wieder funktionieren..zumindest steht die Kommunikation zum Server jetzt :)

timredlich

JA , aber leider steht immer noch im Display " Waiting for Content" . Strom weg, Tasmota neustart, IoBroker Neustart. Script neustart. Nix funktioniert.

TT-Tom

@timredlich

Pack deine Log Meldungen bitte in die Code Tags. das liest sich besser.

so sieht der richtige Start aus.

00:00:00.002 HDW: ESP32-D0WD-V3 v3.0 
00:00:00.042 UFS: FlashFS mounted with 272 kB free
00:00:00.055 CFG: Loaded from File, Anzahl 627
00:00:00.064 QPC: Count 1
00:00:00.113 BRY: Berry initialized, RAM used 3493 bytes
00:00:00.134 Projekt tasmota - NSPanelFlur Version 15.0.1(release-tasmota32)-3_1_3(2025.06.14 10:39:16)
00:00:00.164 TAP: Loaded Tasmota App '/Partition_Wizard.tapp'
00:00:00.749 NXP: Initializing Driver
00:00:00.753 BRY: Successfully loaded 'autoexec.be'
00:00:01.667 WIF: verbinden mit AP1 TomTom24 Channel 1 BSSId B0:F2:08:43:C1:5B in Modus HT40 als NSPanelFlur...
00:00:04.304 WIF: verbunden
00:00:04.510 HTP: Web server active on NSPanelFlur with IP address 192.168.178.102
12:46:44.126 RSL: RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}
12:46:44.665 MQT: Verbindungsversuch…
12:46:44.687 MQT: verbunden
12:46:44.690 MQT: SmartHome/NSPanelFlur/tele/LWT = Online (beibehalten)
12:46:44.692 MQT: SmartHome/NSPanelFlur/cmnd/POWER = 
12:46:44.695 MQT: SmartHome/NSPanelFlur/tele/INFO1 = {"Info1":{"Module":"NSPanelFlur","Version":"15.0.1(release-tasmota32)","FallbackTopic":"cmnd/NSPanelFlur_fb/","GroupTopic":"SmartHome/NSPanelFlur/cmnd/"}}
12:46:44.723 MQT: SmartHome/NSPanelFlur/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanelFlur","IPAddress":"192.168.178.102","IP6Global":"","IP6Local":"fe80::c249:efff:fed3:b06c%st1"}}
12:46:44.742 MQT: SmartHome/NSPanelFlur/tele/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":187}}
12:46:44.749 MQT: SmartHome/NSPanelFlur/stat/RESULT = {"POWER1":"OFF"}
12:46:44.750 MQT: SmartHome/NSPanelFlur/stat/POWER1 = OFF
12:46:44.761 MQT: SmartHome/NSPanelFlur/stat/RESULT = {"POWER2":"OFF"}
12:46:44.763 MQT: SmartHome/NSPanelFlur/stat/POWER2 = OFF
12:46:44.016 MQT: SmartHome/NSPanelFlur/stat/RESULT = {"CustomSend":"Done"}
12:46:44.024 RUL: CUSTOMSEND performs 'RuleTimer3 120'
12:46:44.029 MQT: SmartHome/NSPanelFlur/stat/RESULT = {"T1":0,"T2":0,"T3":120,"T4":0,"T5":0,"T6":0,"T7":0,"T8":0}
12:46:44.416 MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}
12:46:45.974 QPC: Reset
12:46:47.951 MQT: SmartHome/NSPanelFlur/tele/STATE = {"Time":"2025-12-26T12:46:47","Uptime":"0T00:00:08","UptimeSec":8,"Heap":118,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":27,"MqttCount":1,"Berry":{"HeapUsed":33,"Objects":448},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"TomTom24","BSSId":"B0:F2:08:43:C1:5B","Channel":1,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"}}
12:46:47.994 MQT: SmartHome/NSPanelFlur/tele/SENSOR = {"Time":"2025-12-26T12:46:47","ANALOG":{"Temperature1":20.7},"ESP32":{"Temperature":42.2},"TempUnit":"C"}
12:46:50.381 MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}
12:46:56.369 MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}
12:47:02.528 MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}

es diese Sequnce

12:48:27.168 MQT: SmartHome/NSPanelFlur/tele/RESULT = {"CustomRecv":"event,startup,61,eu,5.1.0"}

darauf warte das Script zum Start.

Stopp das Script nochmal und lass das Panel neu starten.
zeig mal nochmal den Start.

timredlich

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.061 UFS: FlashFS mounted with 288 kB free
00:00:00.077 CFG: Loaded from File, Count 1112
00:00:00.084 QPC: Count 1
00:00:00.159 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.182 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.446 NXP: Initializing Driver
00:00:00.452 BRY: Successfully loaded 'autoexec.be'
00:00:01.177 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as NSPanel-2488...
00:00:03.829 WIF: Connected
13:12:54.049 HTP: Web server active on NSPanel-2488 with IP address 192.168.2.22
13:12:55.049 MQT: Attempting connection...
13:12:55.079 MQT: Connected
13:12:55.084 MQT: SmartHome/NSPanel/tele/LWT = Online (retained)
13:12:55.086 MQT: SmartHome/NSPanel/cmnd/POWER = 
13:12:55.093 MQT: SmartHome/NSPanel/tele/INFO1 = {"Info1":{"Module":"NSPanel","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/NSPanel_fb/","GroupTopic":"SmartHome/tasmotas/cmnd/"}}
13:12:55.108 MQT: SmartHome/NSPanel/tele/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"NSPanel-2488","IPAddress":"192.168.2.22","IP6Global":"","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
13:12:55.122 MQT: SmartHome/NSPanel/tele/INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":149}}
13:12:55.137 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.144 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.147 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER2":"OFF"}
13:12:55.148 MQT: SmartHome/NSPanel/stat/POWER2 = OFF
13:12:55.432 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.437 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.508 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:55.534 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.538 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.597 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:55.632 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:55.634 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:55.700 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:57.288 MQT: SmartHome/NSPanel/stat/RESULT = {"POWER1":"OFF"}
13:12:57.291 MQT: SmartHome/NSPanel/stat/POWER1 = OFF
13:12:57.357 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:12:57.939 QPC: Reset
13:12:59.961 MQT: SmartHome/NSPanel/tele/STATE = {"Time":"2025-12-26T13:12:59","Uptime":"0T00:00:09","UptimeSec":9,"Heap":130,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22"}
13:13:00.012 MQT: SmartHome/NSPanel/tele/SENSOR = {"Time":"2025-12-26T13:12:59","Switch1":"OFF","Switch2":"OFF","ANALOG":{"Temperature1":-0.0},"TempUnit":"C"}
13:13:49.734 MQT: SmartHome/NSPanel/stat/RESULT = {"DeviceName":"Tasmota"}
13:13:49.837 MQT: SmartHome/NSPanel/stat/STATUS0 = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota",""],"Topic":"NSPanel","ButtonTopic":"0","Power":"00","PowerLock":"00","PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[2,2,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0},"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.bin","RestartReason":"Vbat power on reset","Uptime":"0T00:00:59","StartupUTC":"2025-12-26T12:12:50","Sleep":50,"CfgHolder":4617,"BootCount":149,"BCResetTime":"2023-09-19T11:22:59","SaveCount":1113},"StatusFWR":{"Version":"15.2.0(release-nspanel)","BuildDateTime":"2025-12-12T11:01:02","Core":"3.3.4","SDK":"5.3.4.251205","CpuFrequency":160,"Hardware":"ESP32-D0WD-V3 v3.0","CR":"431/699"},"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"FileLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["Dreamnet",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]},"StatusMEM":{"ProgramSize":2082,"Free":797,"Heap":121,"StackLowMark":3,"PsrMax":2048,"PsrFree":2025,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"16405E","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","9F9AD7DF","0015A001","B7F7BFCF","05DA9BC4","E0360DC7","480840D2","20200000","D4BC482D","810A80F1","00000814"],"Drivers":"1,2,!3,!4,!5,7,!8,9,10,11,12,!14,!16,!17,!20,!21,24,26,!27,29,!34,!35,38,50,52,!59,!60,62,!63,!66,!67,!68,!73,!75,82,!86,!87,!88,!91,!121","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,62,65,69,76,77,82,89"},"StatusNET":{"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22","Gateway":"192.168.0.1","Subnetmask":"255.255.252.0","DNSServer1":"192.168.0.1","DNSServer2":"fd10:b295:164b:0:3e37:12ff:fe21:7ba6","Mac":"3C:E9:0E:85:E9:B8","IP6Global":"fdcc:f120:56a7:0:3ee9:eff:fe85:e9b8","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.0.1","DNSServer2":"fd10:b295:164b:0:3e37:12ff:fe21:7ba6","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":16.0},"StatusMQT":{"MqttHost":"192.168.0.12","MqttPort":1887,"MqttClientMask":"NSPanel","MqttClient":"NSPanel","MqttUser":"mqttredlich","MqttCount":1,"MqttTLS":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4},"StatusTIM":{"UTC":"2025-12-26T12:13:49Z","Local":"2025-12-26T13:13:49","StartDST":"2025-03-30T02:00:00","EndDST":"2025-10-26T03:00:00","Timezone":"+01:00","Sunrise":"08:43","Sunset":"16:58"},"StatusSNS":{"Time":"2025-12-26T13:13:49","Switch1":"OFF","Switch2":"OFF","ANALOG":{"Temperature1":0.0},"TempUnit":"C"},"StatusSTS":{"Time":"2025-12-26T13:13:49","Uptime":"0T00:00:59","UptimeSec":59,"Heap":119,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":24,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:03"},"Hostname":"NSPanel-2488","IPAddress":"192.168.2.22"}}
13:13:50.258 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.394 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.439 MQT: SmartHome/NSPanel/tele/RESULT = {"nlui_driver_version":"10"}
13:13:50.518 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.568 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.614 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:50.676 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}
13:13:59.378 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}

timredlich

Ich habe auch schon versucht die Firmware neu zu Flashen in der Console mit "FlashNextion http://nspanel.pky.eu/lui-release.tft" es gibt aber darauf keine Flash aktion.

13:18:09.211 CMD: FlashNextion http://nspanel.pky.eu/lui-release.tft
13:18:09.230 MQT: SmartHome/NSPanel/stat/RESULT = {"FlashNextion":"Done"}
13:18:09.276 FLH: host: nspanel.pky.eu, port: 80, get: /lui-release.tft
13:18:09.729 MQT: SmartHome/NSPanel/stat/RESULT = {"T1":0,"T2":0,"T3":0,"T4":0,"T5":0,"T6":0,"T7":0,"T8":0}
13:18:09.747 MQT: SmartHome/NSPanel/stat/RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
13:18:59.402 MQT: SmartHome/NSPanel/stat/RESULT = {"CustomSend":"Done"}

TT-Tom

@timredlich
Prüfe bitte den Berry Driver noch einmal, ggf neu schreiben.
https://github.com/joBr99/nspanel-lovelace-ui/wiki/iobroker---Basisinstallation#3-berry-treiber-installieren

Edit:

flashpfad: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft

timredlich

Habe den Berry Driver neu installiert. Neu gestartet . Keine Verbesserung. Versucht den tft Treiber neu zu flashen. Keine reaktion. Habe dann ein Downgrade auf tasmota 12.1.1 gemacht. Berry Driver neu installiert. Versucht ein Downgrade des TFT Treibers auf 5.0.0 zu machen. keine Reaktion, kein Download, nichts. Gibt es die möglichkeit das Gerät komplett zu Reseten?

14:04:23.699 CMD: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.0.tft
14:04:23.715 MQT: SmartHome/NSPanel/stat/RESULT = {"FlashNextionAdv":"Done"}
14:04:23.772 FLH: host: nspanel.de, port: 80, get: /nspanel-v5.0.0.tft

ilovegym

gib mal in der console ein "reset 4" - da wird alles, bis auf die Netzwerksettings, zurueck gesetzt, danach nochmal von vorne anfangen.. ist aber schon komisch..

timredlich

So ich glaub jetzt ist das Panel ganz kaputt. Ich habe einen "Reset 4" gemacht, dazu nochmal die Reset Taste am Gerät selbst gedrückt. Danach blieb das Display Schwarz. Tasmota ist immer noch zu erreichen, also hab ich alles neu eingerichtet und habe erneut versucht den Display Treiber zu flashen. Aber dies macht er wieder nicht. Und wie gesagt, Display bleibt schwarz. Ich glaube ich hab hier nen neuen Briefbeschwerer.

00:00:00.002 HDW: ESP32-D0WD-V3 v3.0 (PSRAM)
00:00:00.021 UFS: FlashFS mounted with 288 kB free
00:00:00.028 CFG: Loaded from File, Count 14
00:00:00.035 QPC: Count 3
00:00:00.085 BRY: Berry initialized, RAM used 3766 bytes
00:00:00.100 Project tasmota - Tasmota Version 15.2.0(release-nspanel)-3.3.4(2025-12-12T11:01:02)
00:00:00.261 NXP: Initializing Driver
00:00:00.268 BRY: Successfully loaded 'autoexec.be'
00:00:02.000 WIF: Connecting to AP1 Dreamnet Channel 1 BSSId 9C:C7:A6:5C:51:11 in mode HT40 as tasmota-85E9B8-2488...
00:00:04.852 WIF: Connected
15:38:47.076 HTP: Web server active on tasmota-85E9B8-2488 with IP address 192.168.3.33
15:38:48.087 MQT: Attempting connection...
15:38:48.537 MQT: Connected
15:38:48.541 MQT: tele/tasmota_85E9B8/LWT = Online (retained)
15:38:48.543 MQT: cmnd/tasmota_85E9B8/POWER = 
15:38:48.548 MQT: tele/tasmota_85E9B8/INFO1 = {"Info1":{"Module":"ESP32-DevKit","Version":"15.2.0(release-nspanel)","FallbackTopic":"cmnd/DVES_85E9B8_fb/","GroupTopic":"cmnd/tasmotas/"}}
15:38:48.563 MQT: tele/tasmota_85E9B8/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33","IP6Global":"2a03:7500:704:8c00:3ee9:eff:fe85:e9b8","IP6Local":"fe80::3ee9:eff:fe85:e9b8%st1"}}
15:38:48.587 MQT: tele/tasmota_85E9B8/INFO3 = {"Info3":{"RestartReason":"Vbat power on reset","BootCount":8}}
15:38:49.413 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.487 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.513 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.578 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.613 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:49.684 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:49.964 QPC: Reset
15:38:50.665 MQT: stat/tasmota_85E9B8/RESULT = {"Command":"Error","Input":"POWER NaN"}
15:38:50.783 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:38:52.989 MQT: tele/tasmota_85E9B8/STATE = {"Time":"2025-12-26T15:38:52","Uptime":"0T00:00:10","UptimeSec":10,"Heap":130,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":16,"Objects":220},"Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"},"Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33"}
15:38:59.226 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:39:54.517 CMD: FlashNextionAdv0 http://nspanel.de/nspanel-v5.0.2.tft
15:39:54.530 MQT: stat/tasmota_85E9B8/RESULT = {"FlashNextionAdv":"Done"}
15:39:54.571 FLH: host: nspanel.de, port: 80, get: /nspanel-v5.0.2.tft
15:39:55.534 MQT: stat/tasmota_85E9B8/RESULT = {"T1":0,"T2":0,"T3":0,"T4":0,"T5":0,"T6":0,"T7":0,"T8":0}
15:39:55.543 MQT: stat/tasmota_85E9B8/RESULT = {"Rule3":{"State":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}}
15:39:59.216 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:40:59.300 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:41:59.277 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:42:59.358 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}
15:43:52.980 MQT: tele/tasmota_85E9B8/STATE = {"Time":"2025-12-26T15:43:52","Uptime":"0T00:05:10","UptimeSec":310,"Heap":119,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":22,"Objects":225},"Wifi":{"AP":1,"SSId":"Dreamnet","BSSId":"9C:C7:A6:5C:51:11","Channel":1,"Mode":"HT40","RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:04"},"Hostname":"tasmota-85E9B8-2488","IPAddress":"192.168.3.33"}
15:43:59.303 MQT: stat/tasmota_85E9B8/RESULT = {"CustomSend":"Done"}

Community Forum

NEWS

SONOFF NSPanel mit Lovelace UI

Support us

804

32.6k

82.0k

1.3m