UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Asgothian]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Zigbee update macht ebenfalls Problem.

• Du hast den Warnhinweis beim update gelesen und verstanden ?
• Du hast die Anleitung zum Zigbee Adapter gelesen ?

Dann solltest du keine Probleme mit dem update des Zigbee Adapters bekommen.

Ansonsten - Lesen !

A.

[Torsten Lehmann]

@thomas-braun said in RPI-Monitor und GPIO rpi2 v2.3.1:

@torsten-lehmann

Für den rpi2-Adapter musst du wohl derzeitig eine für RaspberryOS 13 angepasste Version von hier installieren:

https://github.com/Grothesk242/ioBroker.rpi2

Vorsichtiger beim Neustart sein:

[Sat Oct 18 01:52:35 2025] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs

IMMER sauber herunterfahren oder neustarten, NIE einfach den Stecker ziehen.

Verwende bei Zigbee den Link 'by-id' und nicht /dev/ttyACM0 als Gerätedatei. Und installier da die aktuelle Version.

iob update 
iob upgrade all

sagt?

Befehl ausführen
ERROR: Process exited with code 25
Weniger Protokolle
Detailliert

$ iobroker url https://github.com/Grothesk242/ioBroker.rpi2.git --host raspberrypi --debug

install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d

NPM version: 10.9.2

Installing Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d... (System call)

npm warn skipping integrity check for git dependency ssh://git@github.com/Grothesk242/ioBroker.rpi2.git

npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported

npm warn deprecated gauge@2.7.4: This package is no longer supported.

> iobroker.rpi2@2.4.0 preinstall> sudo apt-get install -y libgpiod-dev || exit 0

Reading package lists...

Building dependency tree...

Reading state information...

libgpiod-dev is already the newest version (2.2.1-2).The following package was automatically installed and is no longer required:

libyuv0Use 'sudo apt autoremove' to remove it.

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

> @stoprocent/noble@1.19.1 install> node-gyp-build

gyp info it worked if it ends with ok

gyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64

(node:30278) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3gyp info spawn args [

gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/@stoprocent/noble/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',

gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@stoprocent/noble',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]

Traceback (most recent call last):

File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input

File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'

gyp ERR! configure error

gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)

gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok

> mdns@2.7.2 install

> node-gyp rebuild

gyp info it worked if it ends with ok

gyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64

(node:30295) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/mdns/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/mdns',gyp info spawn args '-Dnode_engine=v8',

gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]

Traceback (most recent call last):

File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersion

ModuleNotFoundError: No module named 'distutils'

gyp ERR! configure error

gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/mdnsgyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok

> node-dht-sensor@0.4.5 install

> node-gyp configure

gyp info it worked if it ends with ok

gyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64

(node:30312) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]

Traceback (most recent call last): File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'

gyp ERR! configure error

gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensorgyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok

> opengpio@2.0.2 install> node-gyp rebuild

gyp info it worked if it ends with ok

gyp info using node-gyp@8.4.1

gyp info using node@23.11.1 | linux | arm64

(node:30328) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp info spawn /usr/bin/python3

gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',

gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]

Traceback (most recent call last):

File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'

gyp ERR! configure error

gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok

npm error code 1

npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuild

npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T18_27_24_914Z-debug-0.log

npm warn skipping integrity check for git dependency ssh://git@github.com/Grothesk242/ioBroker.rpi2.gitnpm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supportednpm warn deprecated gauge@2.7.4: This package is no longer supported.gyp info it worked if it ends with okgyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64(node:30278) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/@stoprocent/noble/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/@stoprocent/noble',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]Traceback (most recent call last): File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok gyp info it worked if it ends with okgyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64(node:30295) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/mdns/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/mdns',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]Traceback (most recent call last): File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/mdnsgyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok gyp info it worked if it ends with okgyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64(node:30312) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-dht-sensor/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/node-dht-sensor',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]Traceback (most recent call last): File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensorgyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok gyp info it worked if it ends with okgyp info using node-gyp@8.4.1gyp info using node@23.11.1 | linux | arm64(node:30328) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp info spawn /usr/bin/python3gyp info spawn args [gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py',gyp info spawn args 'binding.gyp',gyp info spawn args '-f',gyp info spawn args 'make',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/opengpio/build/config.gypi',gyp info spawn args '-I',gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi',gyp info spawn args '-I',gyp info spawn args '/home/iobroker/.cache/node-gyp/23.11.1/include/node/common.gypi',gyp info spawn args '-Dlibrary=shared_library',gyp info spawn args '-Dvisibility=default',gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/23.11.1',gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp',gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/23.11.1/<(target_arch)/node.lib',gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/node_modules/opengpio',gyp info spawn args '-Dnode_engine=v8',gyp info spawn args '--depth=.',gyp info spawn args '--no-parallel',gyp info spawn args '--generator-output',gyp info spawn args 'build',gyp info spawn args '-Goutput_dir=.'gyp info spawn args ]Traceback (most recent call last): File "/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py", line 42, in <module> import gyp # noqa: E402 ^^^^^^^^^^ File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/__init__.py", line 9, in <module> import gyp.input File "/opt/iobroker/node_modules/node-gyp/gyp/pylib/gyp/input.py", line 19, in <module> from distutils.version import StrictVersionModuleNotFoundError: No module named 'distutils'gyp ERR! configure error gyp ERR! stack Error: `gyp` failed with exit code: 1gyp ERR! stack at ChildProcess.onCpExit (/opt/iobroker/node_modules/node-gyp/lib/configure.js:259:16)gyp ERR! stack at ChildProcess.emit (node:events:507:28)gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:294:12)gyp ERR! System Linux 6.12.47+rpt-rpi-v8gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v23.11.1gyp ERR! node-gyp -v v8.4.1gyp ERR! not ok npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T18_27_24_914Z-debug-0.log

host.raspberrypi Cannot install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d: 1

ERROR: Process exited with code 2

MOD-EDIT: Code in code-tags gesetzt!

[Torsten Lehmann]

@asgothian ich muss wohl noch viel lernen. ich hab die Warnhinweis beim update gelesen und nicht verstanden . Die Anleitung zum Zigbee Adapter nicht gelesen

[Thomas Braun]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

using node@23.11.1

Wo haste denn jetzt node@23.11.1 her?

node -v

liefert?

[Torsten Lehmann]

@thomas-braun curl -sL https://deb.nodesource.com/setup_23.x | sudo -E bash - .hier her. War das ein Fehler?
node -v v23.11.1

[Thomas Braun]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

War das ein Fehler?

JAAAAAAAAAAAA!
Warum tut man sowas?
Per

iob nodejs-update 22

wieder die vorgesehene und empfohlene Version 22 installieren. Die war doch oben schon am Start...

Man verwendet a) keine abgekündigten und b) keine ungeraden nodejs-Versionen.

[Torsten Lehmann]

@thomas-braun Danke werde ich 22 installieren,

[Torsten Lehmann]

@thomas-braun neuer Versuch

$ iobroker url https://github.com/Grothesk242/ioBroker.rpi2.git --host raspberrypi --debug

install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d

NPM version: 10.9.3

Installing Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d... (System call)

npm error code 1

npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/home/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > node-dht-sensor@0.4.5 install

npm error > node-gyp configurenpm errornpm errornpm errornpm error > opengpio@2.0.2 installnpm error > node-gyp rebuild

npm errornpm errornpm error make: Entering directory '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build'npm error npm warn using --force Recommended protections disabled.npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.20.0 | linux | arm64npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"npm error gyp http GET https://nodejs.org/download/release/v22.20.0/node-v22.20.0-headers.tar.gznpm error gyp http 200 https://nodejs.org/download/release/v22.20.0/node-v22.20.0-headers.tar.gznpm error gyp http GET https://nodejs.org/download/release/v22.20.0/SHASUMS256.txtnpm error gyp http 200 https://nodejs.org/download/release/v22.20.0/SHASUMS256.txtnpm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/node-dht-sensor/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/node-dht-sensor',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.20.0 | linux | arm64npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error ../cpp/opengpio.cpp:3:10: fatal error: gpiod.hpp: No such file or directorynpm error 3 | #include <gpiod.hpp>npm error | ^~~~~~~~~~~npm error compilation terminated.npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpionpm error gyp ERR! node -v v22.20.0npm error gyp ERR! node-gyp -v v11.2.0npm error gyp ERR! not ok npm error npm error code 1npm error npm error path /home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpionpm error npm error command failednpm error npm error command sh -c node-gyp rebuildnpm error npm noticenpm error npm notice New major version of npm available! 10.9.3 -> 11.6.2npm error npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.6.2npm error npm notice To update run: npm install -g npm@11.6.2npm error npm noticenpm error npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T20_12_44_363Z-debug-0.lognpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T20_12_38_490Z-debug-0.log

npm error code 1npm error git dep preparation failednpm error command /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js install --force --cache=/home/iobroker/.npm --prefer-offline=false --prefer-online=false --offline=false --no-progress --no-save --no-audit --include=dev --include=peer --include=optional --no-package-lock-only --no-dry-runnpm error > node-dht-sensor@0.4.5 installnpm error > node-gyp configurenpm errornpm errornpm errornpm error > opengpio@2.0.2 installnpm error > node-gyp rebuildnpm errornpm errornpm error make: Entering directory '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build'npm error npm warn using --force Recommended protections disabled.npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.20.0 | linux | arm64npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"npm error gyp http GET https://nodejs.org/download/release/v22.20.0/node-v22.20.0-headers.tar.gznpm error gyp http 200 https://nodejs.org/download/release/v22.20.0/node-v22.20.0-headers.tar.gznpm error gyp http GET https://nodejs.org/download/release/v22.20.0/SHASUMS256.txtnpm error gyp http 200 https://nodejs.org/download/release/v22.20.0/SHASUMS256.txtnpm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/node-dht-sensor/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/node-dht-sensor',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info ok npm error gyp info it worked if it ends with oknpm error gyp info using node-gyp@11.2.0npm error gyp info using node@22.20.0 | linux | arm64npm error gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"npm error gyp info spawn /usr/bin/python3npm error gyp info spawn args [npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',npm error gyp info spawn args 'binding.gyp',npm error gyp info spawn args '-f',npm error gyp info spawn args 'make',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio/build/config.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',npm error gyp info spawn args '-I',npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/22.20.0/include/node/common.gypi',npm error gyp info spawn args '-Dlibrary=shared_library',npm error gyp info spawn args '-Dvisibility=default',npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/22.20.0',npm error gyp info spawn args '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/22.20.0/<(target_arch)/node.lib',npm error gyp info spawn args '-Dmodule_root_dir=/home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpio',npm error gyp info spawn args '-Dnode_engine=v8',npm error gyp info spawn args '--depth=.',npm error gyp info spawn args '--no-parallel',npm error gyp info spawn args '--generator-output',npm error gyp info spawn args 'build',npm error gyp info spawn args '-Goutput_dir=.'npm error gyp info spawn args ]npm error gyp info spawn makenpm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]npm error ../cpp/opengpio.cpp:3:10: fatal error: gpiod.hpp: No such file or directorynpm error 3 | #include <gpiod.hpp>npm error | ^~~~~~~~~~~npm error compilation terminated.npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.47+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpionpm error gyp ERR! node -v v22.20.0npm error gyp ERR! node-gyp -v v11.2.0npm error gyp ERR! not ok npm error npm error code 1npm error npm error path /home/iobroker/.npm/_cacache/tmp/git-cloneLVOGis/node_modules/opengpionpm error npm error command failednpm error npm error command sh -c node-gyp rebuildnpm error npm noticenpm error npm notice New major version of npm available! 10.9.3 -> 11.6.2npm error npm notice Changelog: https://github.com/npm/cli/releases/tag/v11.6.2npm error npm notice To update run: npm install -g npm@11.6.2npm error npm noticenpm error npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T20_12_44_363Z-debug-0.lognpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-19T20_12_38_490Z-debug-0.log

host.raspberrypi Cannot install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d: 1

ERROR: Process exited with code 25

MOD-EDIT: Code in code-tags gesetzt!

[Thomas Braun]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

npm error ../cpp/opengpio.cpp:3:10: fatal error: gpiod.hpp

Ist das Paket libgpiod-dev installiert?

sudo apt update
apt policy libgpiod-dev

Siehe auch die Readme zum Adapter:

https://github.com/iobroker-community-adapters/ioBroker.rpi2

[Torsten Lehmann]

@thomas-braun Danke für Deine Geduld

pi@raspberrypi:~ $ apt policy libgpiod-dev
libgpiod-dev:
  Installed: 2.2.1-2
  Candidate: 2.2.1-2
  Version table:
 *** 2.2.1-2 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status

MOD-EDIT: Code in code-tags gesetzt

[Thomas Braun]

@torsten-lehmann

Frisch nachinstalliert?
Denn da ist die vermisste Datei drin:

npm error ../cpp/opengpio.cpp:3:10: fatal error: gpiod.hpp: No such file or directorynpm error 3 | #include <gpiod.hpp>

Edit:
Auf meinem Testsystem baut der Adapter auch einwandfrei:

echad@chet:~ $ iobroker url https://github.com/Grothesk242/ioBroker.rpi2.git --host chet --debug
install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d
NPM version: 11.6.2
Installing Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d... (System call)

up to date in 2m

245 packages are looking for funding
  run `npm fund` for details
upload [13] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [12] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [11] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [10] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [9] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [8] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [7] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [5] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [4] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/jsonConfig.json jsonConfig.json application/json
upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi2.png rpi2.png image/png
upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript
Updating objects from io-package.json for adapter "rpi2" with version "2.4.0"
echad@chet:~ $

[Torsten Lehmann]

@thomas-braun deine NPM version: 11.6.2 meine 10.9.3 kan es daran liegen?

[Thomas Braun]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

kan es daran liegen?

Nein. Das baut auch mit npm 10:

echad@chet:~ $ iobroker url https://github.com/Grothesk242/ioBroker.rpi2.git --host chet --debug
install Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d
NPM version: 10.9.3
Installing Grothesk242/ioBroker.rpi2#c87e9539d89bac8f4d19b266679bcb78ed554f1d... (System call)

up to date in 3m

245 packages are looking for funding
  run `npm fund` for details
upload [13] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [12] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [11] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [10] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [9] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [8] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [7] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [5] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [4] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/jsonConfig.json jsonConfig.json application/json
upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi2.png rpi2.png image/png
upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript
Updating objects from io-package.json for adapter "rpi2" with version "2.4.0"
echad@chet:~ $ 

[Torsten Lehmann]

@thomas-braun neue SD ohne Backup zurücksetzen.

added 5 packages in 4m

91 packages are looking for funding
  run `npm fund` for details
upload [13] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [12] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [11] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [10] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [9] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [8] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [7] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [6] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [5] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [4] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [3] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [2] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/jsonConfig.json jsonConfig.json application/json
upload [1] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/rpi2.png rpi2.png image/png
upload [0] rpi2.admin /opt/iobroker/node_modules/iobroker.rpi2/admin/words.js words.js application/javascript
Updating objects from io-package.json for adapter "rpi2" with version "2.4.0"

MOD-EDIT: Code in code-tags gesetzt

[Thomas Braun]

@torsten-lehmann

Setz sowas bitte in </> Codetags. Und die ersten Zeilen fehlen.

[Torsten Lehmann]

@thomas-braun Guten Morgen nach erfolgreicher Installation rpi2 fehlt jedoch beim iobroker die rpi2 Instanz. Irgendwie mach ich wohl was falsch bei der iobroker Installation.

[Thomas Braun]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Irgendwie mach ich wohl was falsch bei der iobroker Installation.

Nein, wenn Adapter via GitHub installiert werden muss die Instanz manuell hinzugefügt werden.

[Torsten Lehmann]

@thomas-braun said in RPI-Monitor und GPIO rpi2 v2.3.1:

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Irgendwie mach ich wohl was falsch bei der iobroker Installation.

Nein, wenn Adapter via GitHub installiert werden muss die Instanz manuell hinzugefügt werden.

da bin ich überfordert. Entschuldige, Wie mache ich das?

[Thomas Braun]

@torsten-lehmann

Mit dem PlusZeichen-Icon.
Steht auch 'Instanz hinzufügen' dran, wenn ich mich recht entsinne.

[Homoran]

@torsten-lehmann sagte in RPI-Monitor und GPIO rpi2 v2.3.1:

Wie mache ich das?

https://www.iobroker.net/#de/documentation/tutorial/adapter.md

sogar mit Filmchen