ioBroker Admin und Vis startet nicht mehr

x.Oli

Der lädt und lädt und lädt .. dachte damit kann man "schon mal" was anfangen

x.Oli

Skript v.2024-05-22

*** BASE SYSTEM ***
cat: /sys/devices/virtual/dmi/id/sys_vendor: No such file or directory
Hardware Vendor : 
Kernel          : armv7l
Userland        : 32 bit
Docker          : v6.1.0
Virtualization  : Docker
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 15:32:48 up  4:47,  0 users,  load average: 2.02, 2.05, 2.48
CPU threads: 4


*** Time and Time Zones ***
Mon Jun 17 13:32:48 UTC 2024
Mon Jun 17 15:32:48 CEST 2024
CEST +0200
Etc/UTC

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
js-controller is not running

*** Display-Server-Setup ***
Display-Server: false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.1G        699M        5.1G        267M        2.3G        6.1G
Swap:            23G          0B         23G
Total:           31G        699M         28G

Active iob-Instances:   1

         8097 M total memory
          699 M used memory
         1753 M active memory
          922 M inactive memory
         5100 M free memory
          357 M buffer memory
         1940 M swap cache
        23447 M total swap
            0 M used swap
        23447 M free swap

*** top - Table Of Processes  ***
top - 15:32:49 up  4:47,  0 users,  load average: 2.02, 2.05, 2.48
Tasks:  11 total,   1 running,  10 sleeping,   0 stopped,   0 zombie
%Cpu(s): 15.4 us, 13.8 sy,  0.0 ni, 70.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8097.5 total,   5099.9 free,    699.8 used,   2297.8 buff/cache
MiB Swap:  23447.2 total,  23447.2 free,      0.0 used.   6050.8 avail Mem 

*** FILESYSTEM ***
Filesystem            Type     Size  Used Avail Use% Mounted on
overlay               overlay  2.0T   28G  2.0T   2% /
tmpfs                 tmpfs     64M     0   64M   0% /dev
tmpfs                 tmpfs    4.0G     0  4.0G   0% /sys/fs/cgroup
shm                   tmpfs     64M     0   64M   0% /dev/shm
/dev/mapper/cachedev1 ext4     2.0T   28G  2.0T   2% /opt/iobroker

Messages concerning ext4 filesystem in dmesg:
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:33 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:34 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table0: sdb1, 5
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table2: sdb1, 5, 0, 0, 4096
[Mon Jun 17 10:45:35 2024] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table0: md9, 5
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table2: md9, 5, 0, 0, 4096
[Mon Jun 17 10:45:37 2024] EXT4-fs (md9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table0: dm-9, 3
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table2: dm-9, 3, 0, 0, 4096
[Mon Jun 17 10:45:59 2024] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table0: dm-10, 16384
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table2: dm-10, 16384, 0, 0, 4096
[Mon Jun 17 10:46:01 2024] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,delalloc,nopriv,nodiscard,noacl
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table0: md13, 4
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table2: md13, 4, 0, 0, 4096
[Mon Jun 17 10:46:31 2024] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc

Show mounted filesystems:
TARGET                       SOURCE                                                                                                                                                      FSTYPE  OPTIONS
/                            overlay                                                                                                                                                     overlay rw,relatime,lowerdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/MDHKLBLUOMLN2IILOFEXVPWYYR:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/2ICE3G26USP5NVPMCAZAKLR7QQ:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/THNQILDZ73V37ZFKX6VX23X4BY:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/3ZLNKDMCAM2YLLX5LIU7XPTNBF:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/ISHGEGZOH5RJTOVYFE6GKWKISP:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/DNRLD6YXALLPP3ZK2YQ5YUIQBI:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/KZGMW2LGI43JH2MTIU7PJIK43K:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/5KCKSNRENQGGKOZQ3FADL5PJGN:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/EPZS54GJUP6UPVN4LGTQSWAXYJ:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/A6DLUQC6XKOHDPFDKCGXMAGJY3:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/QMPGN475LYPBAAFOF7U6KZKVOE,upperdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/c701b5d32457903c401059c6196702636a20c8bf6d5d3bf1700624fccf18ab85/diff,workdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/c701b5d32457903c401059c6196702636a20c8bf6d5d3bf1700624fccf18ab85/work
|-/proc                      proc                                                                                                                                                        proc    rw,nosuid,nodev,noexec,relatime
|-/dev                       tmpfs                                                                                                                                                       tmpfs   rw,nosuid,size=65536k,mode=755
| |-/dev/console             devpts[/0]                                                                                                                                                  devpts  rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666
| |-/dev/pts                 devpts                                                                                                                                                      devpts  rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666
| |-/dev/mqueue              mqueue                                                                                                                                                      mqueue  rw,nosuid,nodev,noexec,relatime
| `-/dev/shm                 shm                                                                                                                                                         tmpfs   rw,nosuid,nodev,noexec,relatime,size=65536k
|-/sys                       sysfs                                                                                                                                                       sysfs   rw,nosuid,nodev,noexec,relatime
| `-/sys/fs/cgroup           tmpfs                                                                                                                                                       tmpfs   rw,nosuid,nodev,noexec,relatime,mode=755
|   |-/sys/fs/cgroup/memory  none[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                              cgroup  rw,nosuid,nodev,noexec,relatime,memory
|   |-/sys/fs/cgroup/cpu     cpu[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                               cgroup  rw,nosuid,nodev,noexec,relatime,cpu
|   |-/sys/fs/cgroup/cpuset  cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,cpuset
|   |-/sys/fs/cgroup/cpuacct cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,cpuacct
|   |-/sys/fs/cgroup/blkio   cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,blkio
|   |-/sys/fs/cgroup/devices cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,devices
|   |-/sys/fs/cgroup/freezer cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,freezer
|   `-/sys/fs/cgroup/systemd cgroup[/docker/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,name=systemd
|-/opt/iobroker              /dev/mapper/cachedev1[/Docker/iobroker-data]                                                                                                                ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
|-/etc/resolv.conf           /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd/resolv.conf] ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
|-/etc/hostname              /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd/hostname]    ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
`-/etc/hosts                 /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fa94f29901b66cc16330b8e7e6d27954e7bac673a56443148c226d9e3034a1dd/hosts]       ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user

Files in neuralgic directories:

/var:
35M     /var/
32M     /var/lib
17M     /var/lib/apt/lists
17M     /var/lib/apt
15M     /var/lib/dpkg



/opt/iobroker/backups:
115M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
717M    /opt/iobroker/iobroker-data/
370M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/files/javascript.admin
118M    /opt/iobroker/iobroker-data/files/javascript.admin/static
118M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
130M    /opt/iobroker/iobroker-data/states.jsonl
100M    /opt/iobroker/iobroker-data/objects.jsonl
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7
/usr/bin/corepack       0.18.0


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian bullseye/main armhf Packages
        500 http://security.debian.org/debian-security bullseye-security/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     8.3.1

nodejs modules from github:     0

Adapter State
  system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : ioBroker                                 -  enabled
  system.adapter.alias-manager.0          : alias-manager         : ioBroker                                 - disabled
  system.adapter.backitup.0               : backitup              : ioBroker                                 -  enabled
  system.adapter.cloud.0                  : cloud                 : ioBroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : ioBroker                                 - disabled
  system.adapter.device-reminder.0        : device-reminder       : ioBroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : ioBroker                                 -  enabled
  system.adapter.exchangerates.0          : exchangerates         : ioBroker                                 - disabled
  system.adapter.hmip.0                   : hmip                  : ioBroker                                 -  enabled
  system.adapter.homeconnect.0            : homeconnect           : ioBroker                                 - disabled
  system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : ioBroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : ioBroker                                 - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : ioBroker                                 - disabled
  system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
  system.adapter.info.0                   : info                  : ioBroker                                 -  enabled
  system.adapter.javascript.0             : javascript            : ioBroker                                 -  enabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 - disabled, port: 54321
  system.adapter.mihome.0                 : mihome                : ioBroker                                 - disabled, port: 9898, bind: 192.168.1.126
  system.adapter.nuki-extended.0          : nuki-extended         : ioBroker                                 -  enabled
  system.adapter.parcel.0                 : parcel                : ioBroker                                 -  enabled
  system.adapter.parser.0                 : parser                : ioBroker                                 -  enabled
  system.adapter.pollenflug.0             : pollenflug            : ioBroker                                 -  enabled
  system.adapter.radar2.0                 : radar2                : ioBroker                                 -  enabled
  system.adapter.scenes.0                 : scenes                : ioBroker                                 -  enabled
  system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.tankerkoenig.0           : tankerkoenig          : ioBroker                                 -  enabled
  system.adapter.tankerkoenig.1           : tankerkoenig          : ioBroker                                 -  enabled
  system.adapter.telegram.0               : telegram              : ioBroker                                 - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : ioBroker                                 -  enabled
  system.adapter.trashschedule.0          : trashschedule         : ioBroker                                 -  enabled
  system.adapter.tuya.0                   : tuya                  : ioBroker                                 -  enabled
  system.adapter.unifi-protect.0          : unifi-protect         : ioBroker                                 -  enabled
  system.adapter.unifi.0                  : unifi                 : ioBroker                                 -  enabled
  system.adapter.vis-bars.0               : vis-bars              : ioBroker                                 - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : ioBroker                                 - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : ioBroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : ioBroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : ioBroker                                 - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : ioBroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : ioBroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : ioBroker                                 - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : ioBroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : ioBroker                                 - disabled
  system.adapter.vis.0                    : vis                   : ioBroker                                 -  enabled
  system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
  system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
  system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daswetter"    : 3.1.15   , installed 3.1.15
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "exchangerates": 0.1.0    , installed 0.1.0
Adapter    "hmip"         : 1.22.0   , installed 1.22.0
Adapter    "homeconnect"  : 1.4.0    , installed 1.4.0
Adapter    "hue"          : 3.11.0   , installed 3.11.0
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 8.3.1    , installed 8.3.1
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "parser"       : 2.1.0    , installed 2.1.0
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "radar2"       : 2.2.0    , installed 2.2.0
Adapter    "scenes"       : 3.0.4    , installed 3.0.4
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.3.2
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "unifi"        : 0.7.0    , installed 0.7.0
Adapter    "unifi-protect": 1.0.0    , installed 1.0.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.5.0    , installed 1.5.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1

Objects and States
Please stand by - This may take a while
Objects:        126664
States:         94109

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Get:4 https://apt.grafana.com stable InRelease [7661 B]
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Err:4 https://apt.grafana.com stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.11:40015        0.0.0.0:*               LISTEN      0          459951     -                   
udp        0      0 127.0.0.11:35908        0.0.0.0:*                           0          459950     -                   

*** Log File - Last 25 Lines ***

2024-06-17 15:14:20.034  - info: host.ioBroker Adapter ical still running
2024-06-17 15:14:21.583  - info: ical.0 (8199) processing URL: Tischtennis https://calendar.google.com/calendar/ical/6665d41eb9d239670dce8598134a649540a6418044fbe94836e76fac45281ffd%40group.calendar.google.com/public/basic.ics
2024-06-17 15:14:21.742  - info: ical.0 (8199) processing URL: Geburtstage https://calendar.google.com/calendar/ical/5cpno4mivk581uvsid5vfunrt4%40group.calendar.google.com/public/basic.ics
2024-06-17 15:14:22.090  - info: ical.0 (8199) processing URL: Muellkalender https://calendar.google.com/calendar/ical/4s5ukspsqbuurvbssflvleacoo%40group.calendar.google.com/public/basic.ics
2024-06-17 15:14:22.692  - info: ical.0 (8199) processing URL: Feiertage https://calendar.google.com/calendar/ical/e63ctps0hbjl1o21hrhihc671g%40group.calendar.google.com/public/basic.ics
2024-06-17 15:14:22.913  - info: ical.0 (8199) processing URL: Termine https://calendar.google.com/calendar/ical/j5pqrgg9uin4kh8kedp3jkhk58%40group.calendar.google.com/public/basic.ics
2024-06-17 15:14:36.184  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:14:36.204  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:14:51.188  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:14:51.209  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:15:06.192  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:15:06.214  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:15:21.196  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:15:21.217  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:15:36.199  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:15:36.221  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:15:51.202  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:15:51.225  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:16:06.205  - error: ical.0 (8199) Objects database error: connect ECONNREFUSED 127.0.0.1:9001
2024-06-17 15:16:06.230  - error: ical.0 (8199) States database error: connect ECONNREFUSED 127.0.0.1:9000
2024-06-17 15:16:21.209  - info: ical.0 (8199) Objects database successfully reconnected
2024-06-17 15:16:21.234  - info: ical.0 (8199) Objects database successfully reconnected
2024-06-17 15:17:40.236  - info: ical.0 (8199) Terminated (NO_ERROR): Without reason
2024-06-17 15:17:41.095  - warn: ical.0 (8199) get state error: Connection is closed.
2024-06-17 15:17:41.096  - warn: ical.0 (8199) get state error: DB closed

======================= SUMMARY =======================
                        v.2024-05-22


model name      : Annapurna Labs Alpine AL314 Quad-core ARM Cortex-A15 CPU @ 1.70GHz
Kernel          : armv7l
Userland        : armhf
Docker          : v6.1.0

Installation:           Docker
Kernel:                 armv7l
Userland:               32 bit
Timezone:               CEST +0200
User-ID:                0
Display-Server:         false


Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7
/usr/bin/corepack       0.18.0

Recommended versions are nodejs  and npm 
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.1G        699M        5.1G        267M        2.3G        6.0G
Swap:            23G          0B         23G
Total:           31G        699M         28G

Active iob-Instances:   1
Active repo(s): stable

ioBroker Core:          js-controller           5.0.19
                        admin                   6.13.16

ioBroker Status:        iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

Objects:                126664
States:                 94109

Size of iob-Database:

100M    /opt/iobroker/iobroker-data/objects.jsonl
130M    /opt/iobroker/iobroker-data/states.jsonl

x.Oli

Ist irgendetwas auffällig ?

Thomas Braun

@x-oli

Docker : v6.1.0

Mittlerweile sind wir bei v9.irgendwas
Soweit ich das verfolge.

x.Oli

Oh je .. damit könnte das was zu tun haben ? Ich gebe zu um den Container habe ich mich nie gekümmert.
OK .. ich möchte das alles mal wieder auf Stand haben, bin da aber leider nicht so firm drin.
Backup läuft immer auf den "Heap" Fehler. Bringt es was mir eine .tar Datei von dem gesamten Container zu sichern ? Bekomme ich iobroker dann wieder integriert oder lässt das Container Update den ioBroker Ordner in Ruhe ?

Ein Update würde ich jetzt "so" machen:

docker pull iobroker/iobroker:latest

Passt das ?

Vielen Dank schon mal

Thomas Braun

@x-oli

Von Docker hab ich weiter keine Ahnung.
Aber die Doku dazu ist ganz gut.

x.Oli

Ich habe jetzt mal einen neuen Container mit ioBroker (latest) erstellt. In den Admin Bereich komme ich wie sonst auch wieder rein, aber ist halt alles nackt. Jetzt bleibt die Frage wie ich die Daten vom alten Container in den Neuen bekomme.

Marc Berg

@x-oli sagte in ioBroker Admin und Vis startet nicht mehr:

Ich habe jetzt mal einen neuen Container mit ioBroker (latest) erstellt.

Wenn mich nicht alles täuscht, kann man unter QNAP die Container duplizieren. Damit werden alle Einstellungen inkl. der Volumes "mitgenommen". Du solltest also den alten Container beenden, duplizieren (hier das latest Image auswählen) und den neuen Container starten. Damit werden die ioBroker-Daten übernommen.

Vorher natürlich den neu erstellten "leeren" Container löschen.

x.Oli

@Marc-Berg
Vielen Dank für den Hinweis. Das habe ich tatsächlich immer außer Acht gelassen.

Container ist jetzt auf dem neuesten Stand mit den ioBroker Daten von zuvor.
Situation ist leider noch immer die Gleiche --> Admin Oberfläche lädt sich tot und startet nicht
beim starten des Containers gibt es jetzt aber ein paar mehr Infos --> vielleicht hilft das jemandem ? Mir ist tatsächlich schon beim alten Container aufgefallen, dass er immer an der Instanz "tankerkoenig.1" zu kämpfen hatte. Kann ich die manuell (ohne Admin Oberfläche) komplett löschen, um da einen Fehler auszuschließen ?

--------------------------------------------------------------------------------
-------------------------     2024-06-17 18:09:09      -------------------------
--------------------------------------------------------------------------------
-----                                                                      -----
----- ██╗  ██████╗  ██████╗  ██████╗   ██████╗  ██╗  ██╗ ███████╗ ██████╗  -----
----- ██║ ██╔═══██╗ ██╔══██╗ ██╔══██╗ ██╔═══██╗ ██║ ██╔╝ ██╔════╝ ██╔══██╗ -----
----- ██║ ██║   ██║ ██████╔╝ ██████╔╝ ██║   ██║ █████╔╝  █████╗   ██████╔╝ -----
----- ██║ ██║   ██║ ██╔══██╗ ██╔══██╗ ██║   ██║ ██╔═██╗  ██╔══╝   ██╔══██╗ -----
----- ██║ ╚██████╔╝ ██████╔╝ ██║  ██║ ╚██████╔╝ ██║  ██╗ ███████╗ ██║  ██║ -----
----- ╚═╝  ╚═════╝  ╚═════╝  ╚═╝  ╚═╝  ╚═════╝  ╚═╝  ╚═╝ ╚══════╝ ╚═╝  ╚═╝ -----
-----                                                                      -----
-----              Welcome to your ioBroker Docker container!              -----
-----                    Startupscript is now running!                     -----
-----                          Please be patient!                          -----
--------------------------------------------------------------------------------
 
--------------------------------------------------------------------------------
-----                          System Information                          -----
-----                    arch:                armv7l                       -----
-----                    hostname:            ioBroker                     -----
-----                                                                      -----
-----                          Version Information                         -----
-----                    image:               v9.1.2                       -----
-----                    build:               2024-06-13T23:44:37+00:00    -----
-----                    node:                v18.20.3                     -----
-----                    npm:                 10.8.1                       -----
-----                                                                      -----
-----                        Environment Variables                         -----
-----                    SETGID:              1000                         -----
-----                    SETUID:              1000                         -----
--------------------------------------------------------------------------------
 
--------------------------------------------------------------------------------
-----                   Step 1 of 5: Preparing Container                   -----
--------------------------------------------------------------------------------
 
 
 
--------------------------------------------------------------------------------
-----             Step 2 of 5: Detecting ioBroker Installation             -----
--------------------------------------------------------------------------------
 
Existing installation of ioBroker detected in "/opt/iobroker".
 
--------------------------------------------------------------------------------
-----             Step 3 of 5: Checking ioBroker Installation              -----
--------------------------------------------------------------------------------
 
(Re)setting permissions (This might take a while! Please be patient!)... Done.
 
Checking database connection... Done.
 
Hostname in ioBroker matches the hostname of this container.
No action required.
 
--------------------------------------------------------------------------------
-----                Step 4 of 5: Applying Special Settings                -----
--------------------------------------------------------------------------------
 
Some adapters have special requirements/ settings which can be activated by the use of environment variables.
For more information see ioBroker Docker image docs (https://docs.buanet.de/iobroker-docker-image/docs/).
 
--------------------------------------------------------------------------------
-----                    Step 5 of 5: ioBroker Startup                     -----
--------------------------------------------------------------------------------
 
Starting ioBroker... 
 
##### #### ### ## # iobroker.js-controller log output # ## ### #### #####
host.ioBroker check instance "system.adapter.admin.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.influxdb.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.javascript.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.scenes.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.telegram.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.backitup.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.alexa2.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.cloud.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.exchangerates.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.hmip.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.homeconnect.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.hue.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.ical.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.radar2.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.shelly.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.tuya.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.unifi-protect.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.unifi.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.mihome.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.mihome-vacuum.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.nuki-extended.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.discovery.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.daswetter.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.device-reminder.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.info.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.parser.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.pollenflug.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.tankerkoenig.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.text2command.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.trashschedule.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-bars.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-colorpicker.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-fancyswitch.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-hqwidgets.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-inventwo.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-jqui-mfd.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-justgage.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-rgraph.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis-timeandweather.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.vis.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.web.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.parcel.0" for host "ioBroker"
host.ioBroker check instance "system.adapter.tankerkoenig.1" for host "ioBroker"
This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
TypeError: Cannot read properties of undefined (reading 'name')
    at Hue.getSensorChannelById (/opt/iobroker/node_modules/iobroker.hue/src/main.ts:1325:23)
    at Hue.handleSensorUpdate (/opt/iobroker/node_modules/iobroker.hue/src/main.ts:1178:34)
    at Hue.handleUpdate (/opt/iobroker/node_modules/iobroker.hue/src/main.ts:1154:24)
    at HuePushClient.<anonymous> (/opt/iobroker/node_modules/iobroker.hue/src/main.ts:1117:30)
    at HuePushClient.emit (node:events:517:28)
    at HuePushClient.emit (node:domain:489:12)
    at _emit (/opt/iobroker/node_modules/eventsource/lib/eventsource.js:287:17)
    at parseEventStreamLine (/opt/iobroker/node_modules/eventsource/lib/eventsource.js:302:9)
    at IncomingMessage.<anonymous> (/opt/iobroker/node_modules/eventsource/lib/eventsource.js:259:11)
    at IncomingMessage.emit (node:events:517:28)

This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
Error: DB closed
    at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
    at Socket.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
    at Object.onceWrapper (node:events:632:26)
    at Socket.emit (node:events:517:28)
    at Socket.emit (node:domain:489:12)
    at TCP.<anonymous> (node:net:350:12)

/bin/sh: 1: mdadm: not found

================================== > LOG REDIRECT system.adapter.admin.0 => true [system.adapter.admin.0.logging]
/bin/sh: 1: hcitool: not found

Hier mal ein aktueller Auszug von iob diag:

Skript v.2024-05-22

*** BASE SYSTEM ***
cat: /sys/devices/virtual/dmi/id/sys_vendor: No such file or directory
Hardware Vendor : 
Kernel          : armv7l
Userland        : 32 bit
Docker          : v9.1.2
Virtualization  : Docker
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 18:45:05 up  7:59,  0 user,  load average: 3.81, 4.12, 3.87
CPU threads: 4


*** Time and Time Zones ***
Mon Jun 17 16:45:05 UTC 2024
Mon Jun 17 18:45:05 CEST 2024
CEST +0200
Etc/UTC

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
iobroker
HOME=/opt/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        4.4G        1.6G        280M        3.9G        4.0G
Swap:            24G         81K         24G
Total:           33G        4.4G         26G

Active iob-Instances:   28

         8097 M total memory
         4237 M used memory
         4080 M active memory
         2043 M inactive memory
         1545 M free memory
          278 M buffer memory
         3422 M swap cache
        23447 M total swap
            0 M used swap
        23447 M free swap

*** top - Table Of Processes  ***
top - 18:45:06 up  7:59,  0 user,  load average: 3.81, 4.12, 3.87
Tasks:  35 total,   2 running,  33 sleeping,   0 stopped,   0 zombie
%Cpu(s): 23.1 us,  7.7 sy,  0.0 ni, 46.2 id, 23.1 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8097.5 total,   1544.4 free,   4238.7 used,   3701.3 buff/cache     
MiB Swap:  23447.2 total,  23447.2 free,      0.1 used.   3858.8 avail Mem 

*** FILESYSTEM ***
Filesystem            Type     Size  Used Avail Use% Mounted on
overlay               overlay  2.0T   31G  2.0T   2% /
tmpfs                 tmpfs     64M     0   64M   0% /dev
tmpfs                 tmpfs    4.0G     0  4.0G   0% /sys/fs/cgroup
shm                   tmpfs     64M     0   64M   0% /dev/shm
/dev/mapper/cachedev1 ext4     2.0T   31G  2.0T   2% /opt/iobroker

Messages concerning ext4 filesystem in dmesg:
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:33 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:34 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table0: sdb1, 5
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table2: sdb1, 5, 0, 0, 4096
[Mon Jun 17 10:45:35 2024] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table0: md9, 5
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table2: md9, 5, 0, 0, 4096
[Mon Jun 17 10:45:37 2024] EXT4-fs (md9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table0: dm-9, 3
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table2: dm-9, 3, 0, 0, 4096
[Mon Jun 17 10:45:59 2024] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table0: dm-10, 16384
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table2: dm-10, 16384, 0, 0, 4096
[Mon Jun 17 10:46:01 2024] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,delalloc,nopriv,nodiscard,noacl
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table0: md13, 4
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table2: md13, 4, 0, 0, 4096
[Mon Jun 17 10:46:31 2024] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc

Show mounted filesystems:
TARGET                       SOURCE                                                                                                                                                      FSTYPE  OPTIONS
/                            overlay                                                                                                                                                     overlay rw,relatime,lowerdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/WQR5E6SXTVQJ3ES4UHWS2NJBO2:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/LGQKPLH4TJVX66HW53PEAMMOBZ:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/N6ZWQF7JHJOOMJ5GQG2BJFLYUX:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/FNXVVOHORB6MF3G6UGCLA6LXJY:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/SLN5PJ2RFME5LSHURHYVZQZXEK:/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/l/GXH372PFBBKWLGGTIW7OBOKXUY,upperdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/a4cb0f3d0ee9908eddff0b52dace1fc41858a61aed339c6e85ec7255c6071ca6/diff,workdir=/share/CACHEDEV1_DATA/Container/container-station-data/lib/docker/overlay2/a4cb0f3d0ee9908eddff0b52dace1fc41858a61aed339c6e85ec7255c6071ca6/work
|-/proc                      proc                                                                                                                                                        proc    rw,nosuid,nodev,noexec,relatime
|-/dev                       tmpfs                                                                                                                                                       tmpfs   rw,nosuid,size=65536k,mode=755
| |-/dev/console             devpts[/0]                                                                                                                                                  devpts  rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666
| |-/dev/pts                 devpts                                                                                                                                                      devpts  rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=666
| |-/dev/mqueue              mqueue                                                                                                                                                      mqueue  rw,nosuid,nodev,noexec,relatime
| `-/dev/shm                 shm                                                                                                                                                         tmpfs   rw,nosuid,nodev,noexec,relatime,size=65536k
|-/sys                       sysfs                                                                                                                                                       sysfs   rw,nosuid,nodev,noexec,relatime
| `-/sys/fs/cgroup           tmpfs                                                                                                                                                       tmpfs   rw,nosuid,nodev,noexec,relatime,mode=755
|   |-/sys/fs/cgroup/memory  none[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                              cgroup  rw,nosuid,nodev,noexec,relatime,memory
|   |-/sys/fs/cgroup/cpu     cpu[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                               cgroup  rw,nosuid,nodev,noexec,relatime,cpu
|   |-/sys/fs/cgroup/cpuset  cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,cpuset
|   |-/sys/fs/cgroup/cpuacct cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,cpuacct
|   |-/sys/fs/cgroup/blkio   cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,blkio
|   |-/sys/fs/cgroup/devices cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,devices
|   |-/sys/fs/cgroup/freezer cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,freezer
|   `-/sys/fs/cgroup/systemd cgroup[/docker/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3]                                                                            cgroup  rw,nosuid,nodev,noexec,relatime,name=systemd
|-/opt/iobroker              /dev/mapper/cachedev1[/Docker/iobroker-data]                                                                                                                ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
|-/etc/resolv.conf           /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3/resolv.conf] ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
|-/etc/hostname              /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3/hostname]    ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user
`-/etc/hosts                 /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/ae954e88bb7fa7d6b47d8ebc2a5ce8d925550873c78d06e05d1720f8c20087b3/hosts]       ext4    rw,relatime,no_mbcache,(null),stripe=256,data=ordered,jqfmt=vfsv1,usrjquota=aquota.user

Files in neuralgic directories:

/var:
15M     /var/
13M     /var/lib/dpkg
13M     /var/lib
12M     /var/lib/dpkg/info
1.9M    /var/cache



/opt/iobroker/backups:
115M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
725M    /opt/iobroker/iobroker-data/
370M    /opt/iobroker/iobroker-data/files
138M    /opt/iobroker/iobroker-data/files/javascript.admin
118M    /opt/iobroker/iobroker-data/files/javascript.admin/static
118M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
134M    /opt/iobroker/iobroker-data/states.jsonl
104M    /opt/iobroker/iobroker-data/objects.jsonl
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
26M     /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.8947f24d.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.3
/usr/bin/node           v18.20.3
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.0


nodejs:
  Installed: 18.20.3-1nodesource1
  Candidate: 18.20.3-1nodesource1
  Version table:
 *** 18.20.3-1nodesource1 100
        100 /var/lib/dpkg/status

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     8.3.1

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : ioBroker                                 -  enabled
  system.adapter.alias-manager.0          : alias-manager         : ioBroker                                 - disabled
+ system.adapter.backitup.0               : backitup              : ioBroker                                 -  enabled
+ system.adapter.cloud.0                  : cloud                 : ioBroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : ioBroker                                 - disabled
+ system.adapter.device-reminder.0        : device-reminder       : ioBroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : ioBroker                                 -  enabled
  system.adapter.exchangerates.0          : exchangerates         : ioBroker                                 - disabled
+ system.adapter.hmip.0                   : hmip                  : ioBroker                                 -  enabled
  system.adapter.homeconnect.0            : homeconnect           : ioBroker                                 - disabled
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : ioBroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : ioBroker                                 - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : ioBroker                                 - disabled
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : ioBroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker                                 -  enabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 - disabled, port: 54321
  system.adapter.mihome.0                 : mihome                : ioBroker                                 - disabled, port: 9898, bind: 192.168.1.126
+ system.adapter.nuki-extended.0          : nuki-extended         : ioBroker                                 -  enabled
+ system.adapter.parcel.0                 : parcel                : ioBroker                                 -  enabled
+ system.adapter.parser.0                 : parser                : ioBroker                                 -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : ioBroker                                 -  enabled
+ system.adapter.radar2.0                 : radar2                : ioBroker                                 -  enabled
+ system.adapter.scenes.0                 : scenes                : ioBroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.tankerkoenig.0           : tankerkoenig          : ioBroker                                 -  enabled
+ system.adapter.tankerkoenig.1           : tankerkoenig          : ioBroker                                 -  enabled
  system.adapter.telegram.0               : telegram              : ioBroker                                 - disabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : ioBroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : ioBroker                                 -  enabled
+ system.adapter.tuya.0                   : tuya                  : ioBroker                                 -  enabled
+ system.adapter.unifi-protect.0          : unifi-protect         : ioBroker                                 -  enabled
+ system.adapter.unifi.0                  : unifi                 : ioBroker                                 -  enabled
  system.adapter.vis-bars.0               : vis-bars              : ioBroker                                 - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : ioBroker                                 - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : ioBroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : ioBroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : ioBroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : ioBroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : ioBroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : ioBroker                                 - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : ioBroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : ioBroker                                 - disabled
  system.adapter.vis.0                    : vis                   : ioBroker                                 -  enabled
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daswetter"    : 3.1.15   , installed 3.1.15
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "exchangerates": 0.1.0    , installed 0.1.0
Adapter    "hmip"         : 1.22.0   , installed 1.22.0
Adapter    "homeconnect"  : 1.4.0    , installed 1.4.0
Adapter    "hue"          : 3.11.0   , installed 3.11.0
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 8.3.1    , installed 8.3.1
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "parser"       : 2.1.0    , installed 2.1.0
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "radar2"       : 2.2.0    , installed 2.2.0
Adapter    "scenes"       : 3.0.4    , installed 3.0.4
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.3.2    , installed 3.3.2
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "unifi"        : 0.7.0    , installed 0.7.0
Adapter    "unifi-protect": 1.0.0    , installed 1.0.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.5.0    , installed 1.5.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1

Objects and States
Please stand by - This may take a while
Objects:        127333
States:         94827

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       2515595    239/iobroker.js-con 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       2511648    239/iobroker.js-con 
tcp        0      0 127.0.0.11:45065        0.0.0.0:*               LISTEN      0          2489265    -                   
tcp6       0      0 :::8080                 :::*                    LISTEN      1000       2587606    685/io.web.0        
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       2564590    280/io.admin.0      
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1000       2590846    472/io.tuya.0       
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1000       2590847    472/io.tuya.0       
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1000       2606932    449/io.shelly.0     
udp        0      0 127.0.0.11:46114        0.0.0.0:*                           0          2489264    -                   
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1000       2564502    438/io.radar2.0     

*** Log File - Last 25 Lines ***

2024-06-17 18:51:28.058  - info: shelly.0 (449) [authEnabled] 192.168.1.37 (shelly1pm / shelly1pm-D8BFC01A0D3F / SHSW-PM#D8BFC01A0D3F#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.069  - info: shelly.0 (449) [authEnabled] 192.168.1.173 (shelly1pm / shelly1pm-F4CFA2E3885F / SHSW-PM#F4CFA2E3885F#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.073  - info: shelly.0 (449) [authEnabled] 192.168.1.95 (shelly1pm / shelly1pm-E09806A9C7ED / SHSW-PM#E09806A9C7ED#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.103  - info: shelly.0 (449) [authEnabled] 192.168.1.49 (shelly1pm / shelly1pm-F4CFA2E3B04B / SHSW-PM#F4CFA2E3B04B#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.145  - info: shelly.0 (449) [authEnabled] 192.168.1.75 (shelly1pm / shelly1pm-F4CFA2E3AF49 / SHSW-PM#F4CFA2E3AF49#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.213  - info: shelly.0 (449) [authEnabled] 192.168.1.151 (shelly1pm / shelly1pm-8CAAB542FD4A / SHSW-PM#8CAAB542FD4A#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.218  - info: shelly.0 (449) [authEnabled] 192.168.1.52 (shelly1pm / shelly1pm-D8BFC01A09FE / SHSW-PM#D8BFC01A09FE#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.399  - info: shelly.0 (449) [authEnabled] 192.168.1.45 (shelly1pm / shelly1pm-D8BFC01A19CB / SHSW-PM#D8BFC01A19CB#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.567  - info: shelly.0 (449) [authEnabled] 192.168.1.192 (shelly1pm / shelly1pm-E89F6D851685 / SHSW-PM#E89F6D851685#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.778  - info: shelly.0 (449) [authEnabled] 192.168.1.96 (shelly1pm / shelly1pm-D8BFC019C5AC / SHSW-PM#D8BFC019C5AC#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.790  - info: shelly.0 (449) [authEnabled] 192.168.1.59 (shellyswitch25 / shellyswitch25-483FDA4DA761 / SHSW-25#483FDA4DA761#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.850  - info: shelly.0 (449) [authEnabled] 192.168.1.189 (shellyswitch25 / shellyswitch25-40F520009F32 / SHSW-25#40F520009F32#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.900  - info: shelly.0 (449) [authEnabled] 192.168.1.91 (shellyswitch25 / shellyswitch25-10521CF1375C / SHSW-25#10521CF1375C#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.930  - info: shelly.0 (449) [authEnabled] 192.168.1.42 (shellyswitch25 / shellyswitch25-483FDA4CFBD4 / SHSW-25#483FDA4CFBD4#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:28.962  - warn: parser.0 (595) Cannot read link "http://192.168.1.118/general/information.html?kind=item": AxiosError: timeout of 60000ms exceeded
2024-06-17 18:51:28.964  - warn: parser.0 (595) Cannot read link "http://192.168.1.118/general/information.html?kind=item": AxiosError: timeout of 60000ms exceeded
2024-06-17 18:51:28.990  - info: shelly.0 (449) [authEnabled] 192.168.1.114 (shelly1pm / shelly1pm-D8BFC01A1497 / SHSW-PM#D8BFC01A1497#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:29.009  - info: shelly.0 (449) [authEnabled] 192.168.1.148 (shelly1pm / shelly1pm-D8BFC019C8FF / SHSW-PM#D8BFC019C8FF#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:29.168  - info: shelly.0 (449) [authEnabled] 192.168.1.111 (shelly1pm / shelly1pm-D8BFC019C74F / SHSW-PM#D8BFC019C74F#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:29.189  - info: shelly.0 (449) [authEnabled] 192.168.1.115 (shelly1pm / shelly1pm-D8BFC01A17FD / SHSW-PM#D8BFC01A17FD#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:29.270  - info: shelly.0 (449) [authEnabled] 192.168.1.100 (shelly1pm / shelly1pm-D8BFC01A10F1 / SHSW-PM#D8BFC01A10F1#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:29.662  - info: shelly.0 (449) [authEnabled] 192.168.1.147 (shelly1pm / shelly1pm-D8BFC019C211 / SHSW-PM#D8BFC019C211#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:30.445  - info: shelly.0 (449) [authEnabled] 192.168.1.164 (shellyswitch25 / shellyswitch25-F4CFA2E0B332 / SHSW-25#F4CFA2E0B332#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:31.149  - info: shelly.0 (449) [authEnabled] 192.168.1.108 (shelly1pm / shelly1pm-D8BFC01A134D / SHSW-PM#D8BFC01A134D#1): This device is not protected via restricted login (see adapter documentation for details)
2024-06-17 18:51:35.084  - info: shelly.0 (449) [authEnabled] 192.168.1.109 (shelly1pm / shelly1pm-E09806A9FEBF / SHSW-PM#E09806A9FEBF#1): This device is not protected via restricted login (see adapter documentation for details)

und noch dazu das "Summary":

model name      : Annapurna Labs Alpine AL314 Quad-core ARM Cortex-A15 CPU @ 1.70GHz
Kernel          : armv7l
Userland        : armhf
Docker          : v9.1.2

Installation:           Docker
Kernel:                 armv7l
Userland:               32 bit
Timezone:               CEST +0200
User-ID:                0
Display-Server:         false


Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v18.20.3
/usr/bin/node           v18.20.3
/usr/bin/npm            10.8.1
/usr/bin/npx            10.8.1
/usr/bin/corepack       0.28.0

Recommended versions are nodejs 18.20.3 and npm 10.7.0
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.5G        4.5G        1.6G        280M        3.8G        4.0G
Swap:            24G        184K         24G
Total:           33G        4.5G         26G

Active iob-Instances:   28
Active repo(s): stable

ioBroker Core:          js-controller           5.0.19
                        admin                   6.13.16

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8080, bind: 0.0.0.0, run as: admin

Objects:                127333
States:                 94827

Size of iob-Database:

111M    /opt/iobroker/iobroker-data/objects.jsonl
140M    /opt/iobroker/iobroker-data/states.jsonl

Ro75

@x-oli deine Festplatte, dein Dateisystem hat einen Treffer.

Ro75.

Thomas Braun

@x-oli sagte in ioBroker Admin und Vis startet nicht mehr:

Systemuptime and Load:
18:45:05 up 7:59, 0 user, load average: 3.81, 4.12, 3.87
CPU threads: 4

Die Kiste ist aber auch schon gut ausgelastet...

Die Fehlermeldungen kommen aber nicht vom tankerkoenig sondern von hue.

iob stop hue

und dann mal schauen was da passiert.

Thomas Braun

@ro75 sagte in ioBroker Admin und Vis startet nicht mehr:

@x-oli deine Festplatte, dein Dateisystem hat einen Treffer.

Oh, ja, das schaut nach Trouble aus. Hab ich übersehen.

x.Oli

lässt sich nicht stoppen:

iob stop hue
 Unable to enable Expiry Keyspace events from Redis Server: Connection is closed.
 Connection is closed.
Uncaught Rejection: Error: States DB is not allowed to start in the current Multihost environment
    at Redis.<anonymous> (/opt/iobroker/node_modules/@iobroker/db-states-redis/build/lib/states/statesInRedisClient.js:459:23)
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

@ro75 said in ioBroker Admin und Vis startet nicht mehr:

@x-oli deine Festplatte, dein Dateisystem hat einen Treffer.

Ro75.

Was genau meinte ihr damit ? Woran sehe ich das ? Sollte ich Festplatte tauschen ? Da hängt ein RAID mit 2 Platten drin.

Die Kiste ist aber auch schon gut ausgelastet...

Ja das merke ich auch .. obwohl die Leistung gar nicht zu wenig ist und da eigentlich nicht viel drauf läuft.

Thomas Braun

@x-oli

Hier ruft das Dateisystem um Hilfe:

Messages concerning ext4 filesystem in dmesg:
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:33 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:33 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table0: sda1, 5
[Mon Jun 17 10:45:34 2024] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[Mon Jun 17 10:45:34 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table0: sdb1, 5
[Mon Jun 17 10:45:35 2024] ext4_init_reserve_inode_table2: sdb1, 5, 0, 0, 4096
[Mon Jun 17 10:45:35 2024] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table0: md9, 5
[Mon Jun 17 10:45:37 2024] ext4_init_reserve_inode_table2: md9, 5, 0, 0, 4096
[Mon Jun 17 10:45:37 2024] EXT4-fs (md9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table0: dm-9, 3
[Mon Jun 17 10:45:59 2024] ext4_init_reserve_inode_table2: dm-9, 3, 0, 0, 4096
[Mon Jun 17 10:45:59 2024] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table0: dm-10, 16384
[Mon Jun 17 10:46:01 2024] ext4_init_reserve_inode_table2: dm-10, 16384, 0, 0, 4096
[Mon Jun 17 10:46:01 2024] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,delalloc,nopriv,nodiscard,noacl
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table0: md13, 4
[Mon Jun 17 10:46:31 2024] ext4_init_reserve_inode_table2: md13, 4, 0, 0, 4096
[Mon Jun 17 10:46:31 2024] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc

x.Oli

Wird man sich wahrscheinlich nicht drauf verlassen können, wenn das System Fehler ausspuckt.
Kann das mit meinen Problemen zu tun haben und sollte / muß die Platte getauscht werden, oder gibt es da andere Lösungen ?

Thomas Braun

@x-oli

Das kann auch vom RAM kommen.
Google mal nach den Fehlermeldungen.
ext4_init_reserve_inode_table0

x.Oli

@thomas-braun said in ioBroker Admin und Vis startet nicht mehr:

sda1

Guten Morgen
Oh je .. das klingt nach großen Problemen. Das Thema RAM ist schnell zu testen. Ich werde heute oder morgen mal ein neues Modul einsetzen. Die Festplatten lasse ich gerade mal "intensiv" testen .. der sollte mir da ja irgendwas anzeigen wenn Sektoren kaputt sind ?!

Es ist halt alles so mega langsam durch diese hohe Auslastung. Gibt es noch etwas Anderes was ich angehen und testen kann ?

LG Oli

Ro75

@x-oli "Langsam" ist der Computer, weil er Probleme hat Daten von bzw. auf die Festplatte zu schreiben. Es kommt zum Stau.

Ro75.

Community Forum

NEWS

ioBroker Admin und Vis startet nicht mehr

Support us

363

32.5k

81.9k

1.3m